Sports Tenders in Rajasthan

Volleyball Net, Volleyball Antennae, Volleyballs, Football, Cricket Bat, Cricket Stumps and Bails, Badminton Shuttle Cock, Badminton Racquets, Badminton Net, Discus ( Rubber/PVC ) - Athletics, Measuring Tape, Skipping Rope

Construction of c.C. road from Barkat kha plo to nazir kha house, usimanya masjid to aladeen house rajesh payal house to rafik kaji house, hanif house to tubel well, GYM to ikbal chouhan house ward no 20 Jhunjhunu

PROVN OF MOBILISATION EQPT, STORE, COY STORE, CLOTHING AND SPORTS STORES AT INF BDE SIG COY AND SPL REPAIR/ REPLACEMENT OF CI LINE FROM PUMP HOUSE TO TPT MD ACCN AT JP LINE AT ALWAR MIL STN

Leather Super Volleyball size 4 ISI Marked, Portable Volleyball Pump with Needle ISI Marked, Track Suit with MES Logo Upper and Lower ISI Marked, Volleyball Non Marking shoe ISI Marked, T shirt with Shorts, Charpoy GI with Plytop 12mm BWR Dimension Overall size 1980mm long 900mm wide and 440mm high Description Charpoy frame made of MS hollow section pipe of 16 gauge Top of charpoy 12mm thick BWP ply

AS PER NIT

58.5 KVA Diesel Generator Set, HDPE L Bucket Stadium Chair

Construction of Clay Tennis Court at Vidhyadhar Nagar Stadium, Jaipur

Renovation of Existing Handball Ground (Boys) at SMS Stadium, Jaipur

Renovation of Existing Table Tennis Court at SMS Stadium, Jaipur

Development work in badminton court at karni singh stadium , Bikaner.

Consturction work of water booth inside bhagat singh stadium lunkaransar.

Repair work of running track inside bhagat singh stadium, Lunkaransar.

Nagarpalika Stadium me podharopan hetu pipeline bichhane ka karya (Retender)

VARIOUS DEVELOPMENT AND CONSTRUCTION WORK IN GORA BADAL STADIUM CHITTORGARH

maintenance work of Major Dhyan Chand Shelter Home Bangar Stadium

GRAM GUMANPURA GP BADODIYAKALA ME PASHU PAYJAL KHEL SE JAGANNATH G DHAKAD KE KUVE TAK GREVAL SADAK KA NIRMAN KARYA

Maintenance of Painting Work

Service Work

Civil Work

Service Work

Electrical Maintenance Work

PLEASE REFER TENDER DOCUMENT

As Per NIT/BID Documents

Service work

Providing and fixing 50 open Air Gymnasium at parks of RHB housing schemes across Rajasthan including O and M for another three years

Construction of rr centre near jawahar lal nehru stadium laxmangarh sikar

REPAIRING OF BEDMINTON COURT AND RUBBER WORK AT INDRAGANDHI STADIUM CHITTORGARH

Construction of Wall Stadium, Track and other development work Gram Chhatargarh

Repairing of Road Cinema Hall to Stadium Tak Nagar Palika Khajuwal

NIT-82 Maintenance Work of Academy building Work, Patel Stadium, Ajmer

Replacement of Existing Badminton Hal Synthetic Flooring at SMS Stadium, Jaipur

Remaining Construction work of Indoor Badminton hall at SMS Stadium Jaipur

NIT-83 Various Development and Maintenance Work at SMS Stadium, Jaipur

Maintenance work of Rajiv gandhi park stadium inside nagar palika area.

TREADMILLS (Q3), Exercise Bike (Q3), Hip twister machine (Q4), Rubberized Weight Dumbbells (Q3), Rubberized Weight Plates (Q3), Olympic bar (Q3), Abdominal bench (Q3), Flooring for Gym (Q4), Yoga Mats (Q3), Multi adjustable bench (Q3), Multi station ... station gym (Q3), ... Swiss Gym Ball ... Flat Gym Bench ...

Tracksuit (Q3), Shorts - Sports (Q3), T - Shirt (V2) (Q3)

Construction and development of a sports ground in Khajuwala

TROPHY Metal FIRST PRIZE Rs500, TROPHY Metal SECOND PRIZE Rs 400, TROPHY Metal THIRD PRIZE Rs.300, TROPHY MetalFIRST PRIZE Rs200, TROPHY MetalSECOND PRIZE RS.150, TROPHY Metal INDIVIDUAL CHAMPIONSHIP Rs1000

STORE/2025-26/10391-95 DATED 30.01.2026 S.NO.01

Operation and Maintenance

As per td

As per td

Electrical Work

Zone contract (Masonry & Painting) Zone 3:- Service Building in the Section of SSE/W/D, BGKT i.e. Rly. Hospital, Subordinates Offices, RPF Barracks, Rly. Club, Rly. Stadium, Diesel shed, Mal Godown, BGKT station building etc. under ADEN/HQ/ JU for year 2026-27 & 2027-28

Leg Press - Outdoor Gym Equipments Leg Press - Outdoor Gym Equipments ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values TYPE Type Leg Press Double Leg Press Single, Leg Press Double SIZE Length 1655 - Width 700 - Height 1858 - CAPACITY Maximum User Weight ( Kg ) 120 100, 110, 120 MATERIAL Governing Specification for GI Pipes BIS specification No IS 1239 ( Part 1 )- 2004, latest BIS specification No IS 1239 ( Part 1 )- 2004, latest, BIS specification No IS 1161:2014, latest All the GI Pipes are ISI marked true Main Central Pipe 125 mm Nominal Bore G.I. Pipe 80mm Nominal Bore G.I. Pipe, 100mm Nominal Bore G.I. Pipe, 125 mm Nominal Bore G.I. Pipe, 150mm Nominal Bore G.I. Pipe Main Central Pipe, Class as per IS 1239 Heavy Medium, Heavy, Not applicable for pipe as per IS 1161 Designation of Main Central Pipe ( as per IS MILD STEEL 114 mm OD pipe - 1/5 1161 ) Moving Frame Pipe 40mm Nominal bore G.I. pipe 32mm Nominal bore G.I. pipe, 40mm Nominal bore G.I. pipe Moving Frame Pipe, Not applicable for pipe as per IS 1161 Designation of Moving Frame Pipe ( as per IS 1161 ) 50 mm OD GI pipe - Foot Rest Frame Foot Rest Hinging Pipe 32mm Nominal Bore G.I. Pipe 25mm Nominal Bore G.I. Pipe, 32mm Nominal Bore G.I. Pipe Foot Rest Frame Pipe, Not applicable for M.S. Plates Designation of Foot Rest Frame Pipe ( as per IS 1161 ) 42 mm OD GI pipe - Connecting Links 40mm Nominal Bore G.I. Pipe 25mm Nominal Bore G.I. Pipe, 32mm Nominal Bore G.I. Pipe, 40mm Nominal Bore G.I. Pipe, 10mm thick MS plates, 12mm thick MS plates Connecting Links Pipe, Not applicable for M.S. Plates and Pipes as per IS 1161 Designation of connecting link Pipe ( as per IS 1161 ) 32 mm OD GI pipe - MS Foundation Plate Thickness 12 10, 12 Foundation Pipes with anchoring 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm, 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm Nominal Bore of Foundation Pipe 125mm 80mm, 100mm, 125mm, 150mm Foundation Pipe, Not applicable for pipe as per IS 1161 Designation of Foundation Pipe ( as per IS 1161 ) NO - 2/5 Galvanization of all Pipes Zinc coating on the tubes shall be in accordance with IS 4736 latest. - Nuts and Bolts for Assembly G.I. - Movement must be supplied with bearings Yes - Bearings Tapered Roller Bearing Ball Bearing, Tapered Roller Bearing Bearings shall be self lubricating and sealed for protection against Rain and dust etc Yes - Seat and Back Rest 6mm thick, Fibre Reinforced plastic with uniform bending radius to avoid sharp edges 2mm Thick G.I. Seat with uniform bending radius to avoid sharp edges, 3mm thick, HDPE with uniform bending radius to avoid sharp edges, 6mm thick, Fibre Reinforced plastic with uniform bending radius to avoid sharp edges, 2.5mm thick, M.S. Perforated with uniform bending radius to avoid sharp edges, LLDPE with uniform bending radius to avoid sharp edges Foot Rest Aluminum casting material - Closing Caps of open ends of the pipes, bearings, bushes and base G I Caps - Thickness of closing caps ( min ) 3 - All Plastic Components U V stabilised, weather resistance - COLOUR Colour As per buyer's requirements - Paint/Finish Poly Urethane Paint, UV Resistant - Paint Coating Thickness ( min ) 100 - OTHER REQUIREMENTS Ergonomic Design Yes - 3/5 Foot rest shall be antislip/antiskid Yes - Moving Scope should be Limited Yes - There shall be no crushing or searing points for user between moving and/or stationary parts of equipment during use Yes - Equipment shall be free from entrapments and sharp edges Yes - Installation Instructions must be provided Yes - Installation Included Included, Not Included Safety and quality Requirements European Standard EN 16630: 2015 latest - Instruction Plate Stainless Steel, Size 150 X 230 X 0.7mm, with indelible printing - CERTIFICATION Certfication ( Safety and Quality Requirements ) No As per European Standard EN 16630, No Registration No and Validity of Registration NA - APPROVAL Drawing depicting detailed dimensions and foundation details shall be got approved from buyer before installation, if desired by buyer Yes - WARRANTY Warranty ( years ) 2 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajnish Chandra Srivastava 335001, GOVERNMENT P.G COLLEGE, HINDUMALKOT ROAD, SRIGNGANAGAR 1 15

GRAM SUKET KE GOVT SIN. SEC. SCHOOL ME KHEL MEDAN KA VIKAS OR CHAAR DIWARI OR 3 CLASS ROOM KA NIRMAN KARYA

Competition kettle bells (Q3), Rubberized Weight Dumbbells (Q3), Rubberized Weight Plates (Q3), Swiss Gym Ball (Q4), Preacher curl bench (Q3), Dumbbell Rack (Q3), Spin Bike (Q3), Flooring for Gym (Q4), Multi Station Gym (V2) (Q3), Elliptical Cross Trainer (Q3), Yoga Mats (Q3)

Civil Work

Civil Work

Leg Press - Outdoor Gym Equipments Leg Press - Outdoor Gym Equipments ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values TYPE Type Leg Press Double Leg Press Single, Leg Press Double SIZE Length 1000 - Width 800 - Height 1828 - CAPACITY Maximum User Weight ( Kg ) 110 100, 110, 120 MATERIAL Governing Specification for GI Pipes BIS specification No IS 1239 ( Part 1 )- 2004, latest BIS specification No IS 1239 ( Part 1 )- 2004, latest, BIS specification No IS 1161:2014, latest All the GI Pipes are ISI marked true true, false Main Central Pipe 100mm Nominal Bore G.I. Pipe 80mm Nominal Bore G.I. Pipe, 100mm Nominal Bore G.I. Pipe, 125 mm Nominal Bore G.I. Pipe, 150mm Nominal Bore G.I. Pipe Main Central Pipe, Class as per IS 1239 Heavy Medium, Heavy, Not applicable for pipe as per IS 1161 Designation of Main Central Pipe ( as per IS 80mm nominal bore G.I. Pipe - 1/5 1161 ) Moving Frame Pipe 32mm Nominal bore G.I. pipe 32mm Nominal bore G.I. pipe, 40mm Nominal bore G.I. pipe Moving Frame Pipe, Not applicable for pipe as per IS 1161 Designation of Moving Frame Pipe ( as per IS 1161 ) 25mm nominal bore G.I. Pipe - Foot Rest Frame Foot Rest Hinging Pipe 32mm Nominal Bore G.I. Pipe 25mm Nominal Bore G.I. Pipe, 32mm Nominal Bore G.I. Pipe Foot Rest Frame Pipe, Not applicable for M.S. Plates Designation of Foot Rest Frame Pipe ( as per IS 1161 ) 25mm Nominal Bore G.I. Pipe - Connecting Links 32mm Nominal Bore G.I. Pipe 25mm Nominal Bore G.I. Pipe, 32mm Nominal Bore G.I. Pipe, 40mm Nominal Bore G.I. Pipe, 10mm thick MS plates, 12mm thick MS plates Connecting Links Pipe, Not applicable for M.S. Plates and Pipes as per IS 1161 Designation of connecting link Pipe ( as per IS 1161 ) NOT APPLICABLE - MS Foundation Plate Thickness 10 10, 12 Foundation Pipes with anchoring 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm, 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm Nominal Bore of Foundation Pipe 80mm 80mm, 100mm, 125mm, 150mm Foundation Pipe, Not applicable for pipe as per IS 1161 Designation of Foundation Pipe ( as per IS 1161 ) not applicable as per IS 1161 - 2/5 Galvanization of all Pipes Zinc coating on the tubes shall be in accordance with IS 4736 latest. - Nuts and Bolts for Assembly G.I. - Movement must be supplied with bearings Yes - Bearings Tapered Roller Bearing Ball Bearing, Tapered Roller Bearing Bearings shall be self lubricating and sealed for protection against Rain and dust etc Yes - Seat and Back Rest 3mm thick, HDPE with uniform bending radius to avoid sharp edges 2mm Thick G.I. Seat with uniform bending radius to avoid sharp edges, 3mm thick, HDPE with uniform bending radius to avoid sharp edges, 6mm thick, Fibre Reinforced plastic with uniform bending radius to avoid sharp edges, 2.5mm thick, M.S. Perforated with uniform bending radius to avoid sharp edges, LLDPE with uniform bending radius to avoid sharp edges Foot Rest Aluminum casting material - Closing Caps of open ends of the pipes, bearings, bushes and base G I Caps - Thickness of closing caps ( min ) 2 - All Plastic Components U V stabilised, weather resistance - COLOUR Colour As per buyer's requirements - Paint/Finish Powder Coated, UV resistant - Paint Coating Thickness ( min ) 80 - OTHER REQUIREMENTS Ergonomic Design Yes - 3/5 Foot rest shall be antislip/antiskid Yes - Moving Scope should be Limited Yes - There shall be no crushing or searing points for user between moving and/or stationary parts of equipment during use Yes - Equipment shall be free from entrapments and sharp edges Yes - Installation Instructions must be provided Yes - Installation Included Included, Not Included Safety and quality Requirements European Standard EN 16630: 2015 latest - Instruction Plate Stainless Steel, Size 150 X 230 X 0.7mm, with indelible printing - CERTIFICATION Certfication ( Safety and Quality Requirements ) As per European Standard EN 16630 As per European Standard EN 16630, No Registration No and Validity of Registration NOT APPLICABLE - APPROVAL Drawing depicting detailed dimensions and foundation details shall be got approved from buyer before installation, if desired by buyer Yes - WARRANTY Warranty ( years ) 2 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Lal Chand Bohra 332713, Sita Ram Modi Govt. Sanskrit College Chaoni Neem-Ka-Thane Distt., Sikar, Rajasthan 1 15