Inspection, Testing & Audit Tenders in Haryana

Custom Bid for Services - Provn for Effluent lan testing reports for inlet of ETP cum STP 300 KLD Similar Category Selection of Laboratories for Testing of Products/Material Testing of Water Quality

HIRING OF, 1 No. MARUTI CIAZ / SWIFT DEZIRE, TATA ZEST OR ANY OTHER SEDAN MODEL VEHICLE IN OFFICE OF SUPERINTENDING ENGINEER and 2 Nos. JEEP/BOLERO/ SCORPIO (LIGHT VEHICLE) TO BE ATTACHED WITH THE EXECUTIVE ENGINEER AND ASSISTANT ENGINEER/STAFF

ENGAGING ACCOUNTING/DATA VERIFICATION/CONSULTING FIRM FOR AUTHENTICATION OF AP SALES FY- 2017-18 and 2018-19

Custom Bid for Services - Calibration of Thermal Imaging Camera Ms Toshniwal Industries Pvt Ltd at 400220 kV Panchkula()

Calibration Services - PORTABLE PARTICLE COUNTER; PORTABLE PARTICLE COUNTER; Any other Government Approved Labs/Service Provider; Buyer premises (onsite)

Calibration Services - LTS KIT 1; LTS KIT 1; Any other Government Approved Labs/Service Provider; Buyer premises (onsite)

Calibration Services - BOND CHECKING TESTER; BOND CHECKING TESTER; Any other Government Approved Labs Service Provider; Buyer premises (onsite)

ARC for Servicing calibration and re certfication of Scandura make standard instruments and B20 Calibrators at Panipat Refinery

To undertake repair, maintenance and calibration of Sensiflow Meter at BS VI Emission Test Bench on proprietary basis.

Calibration of 51 breath analyzer and replacement of 01 display and 01 battery (Make Tayal Tech, Model-Alpha)

Calibration Services - DIGITAL THEODOLIGHT; GITAL THEODOLIGHT; Any other Government Approved Labs Service Provider; As per Scope of Work

ARC for Onsite Calibration and Testing of Measuring Instruments and Electrical Equipments at Panipat Refinery and PNCP, IOCL.

Supply of Wheel Profile Gauge as per Drg. No. SKDL-3592 Alt. 6 or latest with calibration certificate.

Calibration of 51 breathe analyzers and replacement of 01 display and 01 battery (Make - Tayal Tech, Model Alph)

Custom Bid for Services - Calibration of Circuit Breaker Analyser HISAC Ultima Dynamic Contact Resistance Meter DCRM Ultima 06 Ch bearing Sr No 301500Z510 PER DAY CHARGES, Custom Bid for Services - Calibration of HISAC Ultima, Custom Bid for Services ... - Calibration of ...

Custom Bid for Services - Lot 1 Western Region for Testing Inspection and calibration of Thermal Safety Valves installed on High Pressure Station Piping containing hydrocarbons, Custom Bid for Services - Lot 2 Central Region for Testing Inspection ... and calibration of ... and calibration of ... and calibration of ... Category Calibration Services ... Plant Calibration Services ... Plant Calibration Services ... Plant Calibration Services ...

H.H.H.T. BOLT GALVANIZED M15 X 11 TPI X 48MM LONG FULL THREADED CONFORMS TO IS -1367/8.8 GRADE OR 10.9, WITH FLAT, SPRING WASHER AND NUT. MAKE: TVS / GKW / UNBRAKO / LPS / UNILOK / DEEPAKFAST/ POOJA F

CARRYING OUT VARIOUS CIVIL, STRUCTURAL, PIPING, EQUIPMENT and NDT WORKS AS PER STANDARD SPECIFICATION IN CONNECTION WITH COMPOSITE WORK FOR UTILITIES and OFFSITES PART B FOR PANIPAT REFINERY EXPANSION PROJECT (P25) AT PANIPAT REFINERY, HARYANA

stainless steel bucket Stainless Steel Bucket ( 87 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Conformity Conformity to Specification CQA(Gs)/SS/5521(a) of Quality Assurance (General Stores), Ministry of Defence (DGQA), Kanpur * Test Report Details Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification Yes Yes, No Test Report Number and Date ( Not a part of biddable parameter) 411191, 02-04-2018 * Name and Address of the Lab nabl, pkl/haryana * Material Material of Buckets Stainless Steel Sheets Grade designation X07Cr18Ni.9 of IS: 5522 latest Stainless Steel Sheets Grade designation X04Cr19Ni.9 of IS: 5522 latest, Stainless Steel Sheets Grade designation 1/2 X07Cr18Ni.9 of IS: 5522 latest Capacity Nominal Capacity (litre) 6 6, 18 Physical Characteristics Height (Nominal Size) of Buckets (mm) 215 215, 300, 325 Lid Without Lid With Lid, Without Lid Sheet Thickness (mm) As per Specification IS : 4768 latest * Shape/Design and Dimension As per drawing mentioned in the specification No. CQA(GS)/SS/5521(a) * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Aarti Bhadauria 133001, NO. 7 WING AIR FORCE STATION AMBALA 87 15

Calibration Services - ELECMA TEST SET; ELECMA TEST SET; This is to be calibrated by PAC firm only; Off site

Custom Bid for Services - Calibration of Portable Moisture measurement KitMeasuring Sensor Make Vaishala Model MM70 at Panchkula Sub Station

Calibration Services - Particle Counter; Particle Counter; Any other Government Approved Labs/Service Provider; Hybrid (detailed in scope of work)

Portable air plasma cutting machine with calibration certificate. Specification as per Annexure. Firms Offered make: MBI, Model: CUT-80

WHEEL DIAMETER, TREAD THICKNESS AND EVEN WEAR MEASURING GAUGE AS PER RDSO DRG.NO SKDL-4446 ALONG WITH CALIBRATION CERTIFICATE.

Portable air plasma cutting machine with calibration certificate. Specification as per Annexure. Firms Offer MAKE/BRAND:-Micro Welds India

OVERHAULING OF 8 INCH FLOWMETER, CALIBRATION OF 8 INCH FLOWMETER, OVERHAULING OF 6 INCH FLOWMETER, CALIBRATION OF 6 INCH FLOWMETER, Complete set of internal for 6 Inch TFM 1150 CT, Complete set of internal for 8 Inch TFM 1200 CT, Complete set of internal for 10 InchTFM 1250 CT, Supply of Pre Amplifierr Card at Manglya, Supply of Pick Up Coil at Manglya, Supply of Pre Amplifier Card at Piyala, Supply of Pick Up Coil at Piyala, Supply of Pre Amplifier Card at Kota, Supply of Pick Up Coil at Kota, Supply of Pre Amplifier Card at Kochi, Supply of Pick Up Coil at Kochi

Visible Dye penetrant Kit to RDSO Spec. No. M&C/NDT/105/2001, (Visibility : Type II) Consisting of three items :- (A) Red Visible Dye Penetrant, Visibility : type II and Washability Method - C (Solven

Custom Bid for Services - ARC for Servicing and Calibration of 02 Digital and 01 Analog Tensile Testing Machines for Strength Testing of HDPE Bags and 01 Tensile Testing Machine for Strength Testing of Thread and 02 Machines for Elongation Testing ... Category Calibration Services

Hydraulic Hose Pipe ID 1/4 INCH, 15 Meter long ,with Male fittings of size 3/8 inch, NPT 18 TPI, Mechanically crimped at both End, without QRC, Working Pressure 700 BAR, Brusting Pressure 1400BAR, DN6

Hex head Cap screw 1/2 inch x 13 TPI x 2 - 3/4 inch long to PL No. 15032206 to DLW Drg No. TPE, 13 - 0044 Sl. No. 43 MAKE DFL/UNBRAKO/LPS/SFL/ ONLY

Empanelment of Companies/ Agencies for Development and Support for Application Development/ Networking/ Security/ Mobile Development/ Web Development/ Software Development/ Software Design/ Quality Assurance/ Web Design etc

"DYE PENETRANT TEST (Liquid Penetration Examination) and ratio of by volume between penetrant, cleaner & developer shall be 1:3:2 as per RDSO Specification No-M&C/NDT/105/2001" as per ANNEXURE schedul

Custom Bid for Services - Contract for calibration of Flue gas analyser and Dirty Pitot tube at IGSTPP Jharli Jhajjar Haryana

Custom Bid for Services - RPNC244084 Calibration of Smart Transmitters of various make in Panipat Naphtha Cracker Similar Category Support Services

Repair and Overhauling Service - Wheeled Skid Steer Loader (V2) as per IS/ISO 7131 (Latest); CALIBRATION RIG; No; Buyer Premises

On site Testing and Calibration of 02S accuracy Class SEM in various Stns under TS Division Manesar from NABL LAB

Wheel Profile Gauge as per drawing No. SKDL-3592 Alt. -6 or latest with calibration Certificate. Make- AOEG or Similar.

Hex head bolt 1 inch - 8 TPI X 4 1/2 inch long to DLW drg no. 2p11629 Alt R3 with elastic stop nut (nylock) for the maintenance of HHP Diesel Locomotives. Firm's offer: as per Tender

HEX HEAD CAP SCREW SIZE 3 UPON 8 INCH - 16 TPI X 4 - 1 UPON 2 INCH LENGTH TO DLW PART NO.15031275 S.NO.32 OF DLW DRG.NO.TPE-13-0044 ALT.t AS PER MAKE APPROVED BY DLW.

Bolt Hex head 3/8 inch 16 TPI x 1-1/4 inches long cadmium / GI coated with suitable one flat washer and one spring washer. Material BS1768, Gr.SAE-5. Special Note : Manufacturer should Emboss the make

Special Repair for Renovation of Quality Control PWD (BandR) Division Office Building at Karnal

Die Penetrante system consisting of the following 3 items conforming to RDSO specn.No.M&C/NDT/105/2001 & packing in Aerosal can capacity 330 ml volume Qty in cans 1. Penetrant----- 1 can (Type-II vis

Penetrate system consisting of the following 3 items conforming to RDSO Spec.no. M&C/NDT/105/2001 & Packing in Aerosol can - capacity 330 ml volume. Qty. in cans. 1. Penetrant - 1 can. (Type - II Visi

On site Testing and Calibration of 0 2S accuracy Class SEM in various Substation under Daultabad Division from NABL LAB 14 Nos Meters

Custom Bid for Services - RPNC243091 Inspection testing and Calibration of GE make Online Moisture Probes at their works Pune ITEM 10 PNC, Custom Bid for Services - RPNC243091 Inspection testing and Calibration of GE make Online Moisture Probes at ... and Calibration of ...

Calibration Services - HUMAN BODY VOLTAGE READER AND DISCHRGER; AS PER SCOPE OF WORK; Any other Government Approved Labs/Service Provider; Lab

Annual Rate Contract for Repair and calibration of lathe model NH22 and Milling Machine FN3U of HMT make at Panipat Refinery

Work Required in Calibration lab in GEW of Electrical Engineering Deptt. in J.C. Bose University of Science and Technology, YMCA Faridabad

Custom Bid for Services - RPNC220055 Calibration of Ultrasonic flow meters of N2 and O2 service installed at OFFSITE Panipat Naphtha Cracker

Calibration Services - Human body voltage reader & discharger; As per scope of work (SoW); Any other Government Approved Labs/Service Provider; Lab