Inspection, Testing & Audit Tenders in Karnataka

Routine Collection, Loading, Transportation and Unloading of Mill rejects, Coal (dry or wet), clearing of coal from feeder floor during Calibration of mill, HFO unloading and Miscellaneous works of Unit 1, 2 and 3

Supply, installation, calibration, testing and commissioning of Tank Gauging System along with allied automation works for 1 x 8500 KL ATF tank and JP-5 handling facilities at Devangonthi Terminal under Karnataka State Office

Microprocessor based remote temperature display,operating voltage 230V or 110 AC, input 4-20mA with calibration facility, to measure temperature upto 600 degC. No. of digits shall be 3 1/2 with LED di

PRESSURE GAUGE FOR 400T HYDRAULIC PRESS MACHINE WITH DIAL SIZE- 6 INCH, RANGE 0-400Kg/cm2, END FITTING- 3/8 INCH BSP & CALIBRATION CERTIFICATE FROM NABL ACCREDITED/GOVT. APPROVED LAB VALID FOR AT LEAS

Custom Bid for Services - MRPL Tender 3300009170 Calibration of Laboratory Equipments as per detailed Scope Of Work mentioned in the tender SOR Items in Annexure A complete items from Sl no 1 to 78

Custom Bid for Services - MRPL Ref no 3900000543 Item code 1041449 for Services for Verification of calibration and certification of Mass flow meter by the Department of Legal Metrology as per BOQ in GEM

Supply of Manpower for essential Quality Control works in the jurisdiction of KNNLQuality Control Division Munirabad For the year 2025-2026.KNNL/2025-26/SE0366/CALL-2

Customization 1, Customization 2, Customization 3, Customization 4, Customization 5, Customization 6, Customization 7

Calibration of Anatel TOC 600 Analyser

Calibration of Anatel TOC 600 Analyser

Calibration and re inspection of standards

5 Ton Load Cell Compression Type Model SI-428C or Similar with 15 Meter Long cable along with Calibration and Test Report (NABL) As per Annexure Attached & Drawing. ( Qty 8 nos load cell). 8 Channe

CALIBRATION & FUEL CELL SENSOR CHANGING OF 27 NOS. BREATH ANALYZER MACHINES OF TAYAL TECH MADE FITTED IN KIOSK AND HAND HELD TYPE IN VARIOUS CREW LOBBIES as per RDSO Specification No. RDSO/2015/EL/Sp

1. ASTM Sieve Sets Stainless steel 8" diameter and 2" height, with the following Sieve Set ASTM No. 8,10,12,14 and 16 with lid and pan suitable for using on sieve shaker with calibration certificate t

Guage pressure transmitter Input Supply max: 45 VDC,Out Put 4-20MA, max WP:7KG/CMSQ, Calibration 0 to 40 PSI. Similar To Model No.1151GP6E12B1DFM4 of ROSEMOUNT make.The unit shall be supplied along wi

Providing PMC Services including Supervision Quality control for work of Comprhensive Development of Arterial and sub arterial and drains and other allied works in Doddanekkundhi Main road from ORR to HAL old air port road ISRO road AECS Layout 60 Feet road from CMRIT college to Kundalahalli Junction and Chinnapanahalli main road via from Rainbow Hospital to Jeevika Hospital road and Hoody main road from Y junction to Hoody Circle in Mahadevapura constituency under GOK Grants

Providing PMC Services including Supervision Quality control for work of Comprhensive Development of Arterial and sub arterial and drains and other allied works in Vishveshwaraiah main road 2nd main Doddanekkundhi Industrial estate from Graphite India main road to Vishveshwaraiah Main road 2nd Main Rado industrial works and in EPIP main road via Vydehi hospital from Graphite India road to ITPL Main road Big Bazaar Junction and in Garudacharpalya link road from Graphite india main road to Garudacharpalya in Mahadevapura

Custom Bid for Services - MRPL Tender No 3300011561 and Service code 1028044 AMC for servicing and calibration of UTM instrument as per tender document section and in GEM overall total lump sum rate to be quoted considering 2 AU quantities ... time calibration of ... time calibration of ... time calibration of ...

Custom Bid for Services - a Upgradation to latest version of VXelements software b Calibration and AMC for Handy Scan700 Laser Scanning Machine Sl No662508 for a period of one year, Custom Bid for Services - Positioning of stand by scanner during servicing of equipment

Custom Bid for Services - Job order for onsite repair and servicing of digital plotting machine with all necessary damaged life exhausted spares with new one including configuration and calibration as per the requirement of this office

Guage pressure transmitter Input Supply max: 45 VDC,Out Put 4-20MA, max WP:7KG/CMSQ, Calibration 0 to 40 PSI. Similar To Model No.1151GP6E12B1DFM4 of ROSEMOUNT make. ACCEPTED MODEL AND MAKE: 2051G-P-2

5 Ton Load Cell Compression Type Model SI-428C or Similar with 15 Meter Long cable along with Calibration and Test Report (NABL) As per Annexure Attached & Drawing. (Qty 8 nos load cell). 8 Channel Di

Custom Bid for Services - TENDER FOR ANNUAL MAINTENANCE CONTRACT FOR CATHODIC PROTECTION SYSTEM OF MOUNDED STORAGE VESSELS LPG AT BPCL BANGALORE LPG PLANT Similar Category Maintenance and Pigging Service for Oil and Gas Pipelines Calibration Services

Calibration Services - TOTAL CHAREGES INC GST FOR PROFICIENCY TEST FOR CHEMICAL COMPOSITION OF LOW ALLOY STEEL 01 No; TOTAL CHAREGES INC GST FOR PROFICIENCY TEST FOR CHEMICAL COMPOSITION OF LOW ALLOY STEEL 01 No; NABL Labs; Buyer premises (onsi.., ... (onsi.., Calibration Services ... (onsite), Calibration Services ... (onsite), Calibration Services ... (onsite), Calibration Services ... (onsite), Calibration Services ...

Calibration of Semiconductor Device Analyzer model B1500A

for calibration and re-certification of standards

Dismantling, Installation and Calibration of TMC Table

Calib 1, Calib 2, Calib 3, Calib 4, Calib 5, Calib 6, Calib 7, Calib 8, Calib 9, Calib 10, Calib 11, Calib 12, Calib 13, Calib 14, Calib 15, Calib 16, Calib 17, Calib 18, Calib 19, Calib 20, Calib 21, Calib 22

CIRCULAR BAND SAW BLADE TPI4 (Q3), CIRCULAR BAND SAW BLADE TPI6 (Q3), CIRCULAR BAND SAW BLADE TPI VAR 2-3 (Q3)

Custom Bid for Services - Operation and Maintenance of Substations Lighting Fans and Distribution system including Calibration of Switch gears protective devices and measuring devices for a period of Two years Similar Category Operation And Maintenance Of Substation

Custom Bid for Services - Operation and Maintenance of Substations Lighting Fans and Distribution system including Calibration of Switch Gears Protective Devices and Measuring Devices for a Period of Two Years Similar Category Operation And Maintenance Of Substation

Custom Bid for Services - AMC ALONG WITH ONE TIME REPAIR FOR BOKO5 AXIS CNC MACHINE WITH CONNECTED ACCESSORIES STABILIZERS OIL COOLING UNIT LOCATED AT NC SHOP FOR A PERIOD OF 3 YEARS INCLUDING ONE TIME LASER CALIBRATION

Taper Plug Gauge for 6FRA6068 type TM as per RDSO DRAWING NO. SKEL-5032 ALT- 0 OR LATEST. During Delivery of material , Calibration certificate issued from NABL/ GOVT. approved test Lab. MAKE: PRASAD / PIE / GANAPATHY or equivalent

THREAD PLUGE GAUGE 1"x 8TPI UNC 2B THREAD PLUG GAUGE SIZE 1"x8TPI UNC 2B SCREW PLUG GAUGE GO AND NO GO WITH CALIBRATION CERTIFICATE TRACEBLE TO NABL MAKE H.I.P, LIMIT, BAKER, MM ACCEPTED MAKE/CERTI

Simplex K type Thermocouple of following specification TC OD: 6mm TC length: 930mm TC type: K type simplex TC range: 0-1100 deg C Type of Sheath : SS310 TC accuracy: as per IS:2054 Calibration test c

PRESSURE GAUGE OF 2.5 INCH DIAL FOR PRESSURE RANGE 0-21KG/CM2 WITH 1/4 INCH BSP(BOTTOM MOUNT THREAD) WITH LEAST COUNT OF 0.5 KG/CM2 AND WITH CALIBRATION CERTIFICATE TRACEABLE TO NABL accepted offer: M

Taper Plug Gauge for 6FRA6068 type TM as per RDSO DRAWING NO. SKEL-5032 ALT- 0 OR LATEST. During Delivery of material , Calibration certificate issued from NABL/ GOVT. approved test Lab. MAKE: PRASAD / PIE / GANAPATHY or equivalent

Calibration Services - TOTAL CHARGES INCLUDING GST FOR ONSITE CAL OF HYD ACTUATORS IN DISMODE FOR 01 SET; TOTAL CHARGES INCLUDING GST FOR ONSITE CAL OF HYD ACTUATORS IN DISMODE FOR 01 SET; NABL Labs; Buyer premises (onsite)

stainless steel jugs Stainless Steel Jugs ( 25 ) Technical Specifications Specification Specification Name Values Allowed Values Specifiction Conformity to specifiction of CQA(GS)/SS/517(b) of Quality assurance (general Stores) Ministry of Defence (DGQA) Kanpur Yes - Dimension Top Dia of Jugs (mm) 137 - Bottom dia of Jugs (mm) 92 - Height of Jugs (mm) 185 - Sheet Thickness (after formation) (mm) 0.7 - Material Material of Jugs Stainless Steel Sheets and Strips for utensils of IS 5522/1992 - Capacity Capacity (Ltrs) 2 - Shape Shape, Dimension and Pattern Yes - Test reports Availability of the Type test report from Central Gov./NABL/ILAC accredited lab. proving/showing conformity to the Yes - 1/3 specification. Type test Certificate No. 5646 - Type test Certificate date. 20012017 - Name of the Lab. ABC - Address of the Lab. H-87/9, HARYANA - Test reports to be furnished to the Buyer on demand Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Yogesh Kumar 560007, 2 ASC Training Centre Agram Post, Bangalore-56007 Near Trinty Circel 25 15

Providing PMC Services including Supervision, Quality control for the work of Comprehensive Development of Roads and Drains of Existing Road and Improvements of Drain to balance portion of Blessing Garden from Hennur Bagalur road to Byrathi village road, Basavanna Nagar Main Road EPIP Industrial Area Road (SAP Labs Road Number 2 and Satya Sai Hospital Road) from ITPL Main Road (Near Hoodi Signal) to ITPL Main Road (State Highway) and ITPL Main Road from Phoenix Mall Mahadevapura to Hopefarm circle

Onsite Calibration of Light House Airborne Particle Counter

Resistance; NABL Labs; Lab, Calibration Services - Electrical, Calibration of Digital Multimeter Make-Fluke Model-179 True RMS Sl No- 31340194 for 3 Nos; Voltage, Current, Power (AC/DC), Resistance; NABL Labs; Lab, Calibration Services - Electrical, ... Electrical, Calibration of ... Lab, Calibration Services ... Electrical, Calibration of ... Lab, Calibration Services ... Electrical, Calibration of ... Lab, Calibration Services ... Electrical, Calibration of ... Lab, Calibration Services ... Electrical, Calibration of ... Lab, Calibration Services ... Electrical, Calibration of ... Lab, Calibration Services ... Electrical, Calibration of ... Lab, Calibration Services ... Electrical, Calibration of ... Lab, Calibration Services ... Electrical, Calibration of ... Lab, Calibration Services ... Electrical, Calibration of ... Lab, Calibration Services ... Electrical, Calibration of ... Lab, Calibration Services ... Electrical, Calibration of ... Lab, Calibration Services ... Electrical, Calibration of ... Lab, Calibration Services ... Electrical, Calibration of ... Lab, Calibration Services ... Electrical, Calibration of ... Lab, Calibration Services ... Electrical, Calibration of ... Lab, Calibration Services ... - Calibration of ...

Digital Inside Micrometer Measuring Range 225-250 mm without any setting Ring as per OEM standard. with calibration certificate, make- Mitutoyo or Baker or insize or moore & wright or TESA or SYLVAC or DML or KROEPLIN OR FORBES

Custom Bid for Services - Carrying Out Thickness Measurement of Above-Ground Petroleum Product Pipelines and Fire Water Pipelines at PMHBL Stations Similar Category Support Services Calibration Services Testing Service for On-Board/Commissioned Equipment/Instrument related to Plant

Project Management Consultancy Services Including Supervision, Monitoring, Quality Control and Preparation of Bill for the works Providing Energy Efficient LED Street lights and its accessories to Kadugodi Division and surrounding areas

Project Management Consultancy Services Including Supervision, Monitoring, Quality Control and Preparation of Bill for the works Providing Energy Efficient LED Street lights and its accessories to Marathalli Division and surrounding areas

Custom Bid for Services - CALIBRATION CHARGES FOR PORTABLE GAS DETECTORS OF QTY 180 DETAILED IN TENDER DOCUMENT, Custom Bid for Services - SERVICE VISIT CHARGE OF QTY 6 DETAILED IN TENDER DOCUMENT, Custom Bid for Services - SPARE SENSOR OXYGEN OF QTY 15 DETAILED IN TENDER DOCUMENT, Custom Bid for Services - SPARE SENSOR LEL OF QTY 15 DETAILED IN TENDER DOCUMENT, Custom Bid for Services - FILTER OF QTY 2 DETAILED IN TENDER DOCUMENT, Custom Bid for Services - BATTERY OF QTY 2 DETAILED IN TENDER DOCUMENT, Custom Bid for Services - PUMP OF QTY 2 DETAILED IN TENDER DOCUMENT Similar Category Support Services Support Services Support Services Support Services Support Services Support Services Support Services

Custom Bid for Services - MRPL tender no 3300009145 1st Item code 1029109 DC33401ABCD Coke drum weld seams buffingsandering or buffing and sandering on metal surface to carry out NDT As per BOQ and in GeM bidder has to Quote Lumpsum amount for 700 qu.., Custom Bid for Services - 2nd Item code 1029170 DC33401ABCD Coke drum insulation retainers prefabricating fixing and welding Welding method will be SMAW As per BOQ and in GeM Bidder has to Quote Lumpsum amount for 8000 quantities including GST

Set of 02 Items consisting of (1) Bolt Hex Head of Size 5/8" X 11 TPI UNC X 1- 1/2" long to Part No: 271558 and BLW Part No. 19016190 Qty 32 Nos. Bolt make: TVS/SUNDEEP/UNBRAKO/DFL only (2) Washer Special Damper to EMD Part No. 9532904 and BLW Part No. 19394366 Qty 68 Nos. Washer as per drawing specifications.

Set of 02 Items consisting of (1) Bolt Hex Head of Size 5/8" X 11 TPI UNC X 1- 1/2" long to Part No: 271558 and BLW Part No. 19016190 Qty 32 Nos. (2) Washer Special Damper to EMD Part No. 9532904 and BLW Part No. 19394366 Qty 68 Nos. Note: Bolt make: TVS/SUNDEEP/UNBRAKO/PFL only and washer as per drawing specifications.