Inspection, Testing & Audit Tenders in Maharashtra

SET OF GAUGES FOR MAINTENANCE OF CENTRE PIVOT TOP FITTED IN CASNUB BOGIES. ONE SET CONSISTING OF : (1.) GAUGE SPHERECIAL TYPE AS PER RDSO DRG.NO. WD-25094-S/2 (QTY=01 NOS/SET) & (2.) GAUGE FLAT TYPE AS PER RDSO DRG.NO. WD-25094-S/3 (QTY=01 NOS/SET). ... WITH CALIBRATION CERTIFICATE ...

Set of AC/DC Electromagnetic Yoke used for Magnetic particle Testing (Qty-01 Nos.) along with essential Spares: (1) Magnetic Indicator Strips (Qty-02 Nos.); (2) Bulb Dispenser (Puffer) Dry Method (Qty-01 Nos.). Technical Requirements as per attached ... and calibration certificate ...

Custom Bid for Services - Total price for Servicing, Repair, Filling, Painting, testing, Calibration, Verification and Stamping of Weights Total Weights = 75 MT Refer SCC And SOW for more details mentioned in Tender document Lumpsum charges to Be ... Category Calibration Services ... Services Calibration Services

Custom Bid for Services - Repair, fabrication, drawing preparation & approval, material testing, supply, machining & erection of mild steel enclosure and Stainless steel (SS304/304L) components Similar Category Repair, Maintenance and Installation of Plant Systems/Equipments

Carrying out various tests on construction materials alongwith Concrete Mixed Design and Job Mix Design for Asphalt works in CIDCO material testing laboratory for three years at Sanpada Railway Station Complex, Sanpada, Navi Mumbai.

Custom Bid for Services - Supply of 39 Drinking water cans daily at premises of the office of Area General manager, Majri Area, Area/Regional Store, Navin Kunada magazine and Coal Quality Control Office of Majri Area Similar Category Hiring of Water Tanker Service Supply of Water through Tanker

Custom Bid for Services - Supply of 39 Drinking water cans daily at premises of the office of Area General Manager, Majri Area, Area/Regional Store, Navin Kunada magazine and Coal Quality Control Office of Majri Area Similar Category Hiring of Water Tanker Service Supply of Water through Tanker

Custom Bid for Services - Servicing, Stamping and Calibration of Mechanical weighing balances listed at Annexure A for first year, Stamping and Calibration of Electronic weighing balances listed at Annexure B for first year, Stamping and Calibration ... and Calibration of ... and Calibration of ... and Calibration of ... and Calibration of ...

Magnetic ink paste Black colour for magnetic particle testing in visible light as per the following conditions. 1) Ink colour: Black colour. 2) Ink in the form of paste and oil suspension medium. 3) As per IS specification: 6410, ASTM E 1444 and ASTM ... RDSO/M&C/ NDT /109/2007, ...

Set of items consisting of: 1) Pre Mixed [Set of items consisting of: 1) Pre Mixed Black Magnetic Particle as per, RDSO/M&C/NDT/109/2007,Rev2 (October 2020)(wet method) in oil media in 500 ml dispenser operating aerosol container (net content- 400ml/280g). 2) White contrast paint as per BS-5044-1973 in 500 ml dispenser operating aerosol container (net content400ml/280g) used with visible magnetic particle for wet method inspection. Firms offer: ORION WCP-61 OR ORION 60BA or Equivalent. ]

Stamping calibration periodical servicing and preventive maintenance of Avery make 40MT Weigh bridge at Panjrapur complex for two years

Provision Human Resources for conducting Calibration Accuracy testing of Ultrasonic Electromagnetic and Mechanical type Water Meters under AEMWCity section

Custom Bid for Services - Installation of Boreholes Depth >0 m =15 m, Custom Bid for Services - Installation of Boreholes Depth >15 m =30 m, Custom Bid for Services - Installation of Boreholes up to and including 15 m for drilling in rock, Custom Bid ... of Third -Party ... Third- Party Inspection Agency GIS ... of Third -Party ... Third- Party Inspection Agency

Pneumatic Barrel Pump (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be ... Empanelled Inspection Agency /Authority ... ONGC QUALITY ASSURANCE DEPARTMENT ...

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - Ship; SERVICEABILITY CHECKS AND CALIBRATION OF HIFR GEARS; Service Provider

Execution of C and I maintenance activities and onsite calibration of various process field instruments at BARC Trombay Mumbnai 400085

Custom Bid for Services - Repairing, Servicing and Calibration of LAB Equipment of 34 items Similar Category Repair and Overhauling Service

DESIGN, MANUFACTURE & SUPPLY OF CALIBRATION BROACH FOR DRAW ING NO. 675-55-106 AND 675-55-2 28, PU (Q3)

Non - Comprehensive AMC for OMAX Water - jet cutting machine (Q3), A - Jet calibration charges for water jet cutting machine (Q3)

Calibration and setting of Relays installed in Control panels in switchyards of Tembhu Lift Irrigation scheme stage 1 to 5

Custom Bid for Services - REPAIRING, SERVICING AND CALIBRATION OF LAB ITEMS QTY 19 ITEMS Similar Category Repair and Overhauling Service

Providing and supplying Alum (Grade I), PAC Powder (IS 15573) Bleaching Powder GR l (TLC) confirming to IS 1065 1989 including all local and Central Taxes, Insurance, charges Transportation and fright Tax, material testing charges, loading

1) Supply, installation and commissioning of wheel load measurement in Electronic In-motion Weigh Bridges at CKNI and to be installed at Kayar. 2)Shifting of EIMWB from BPQ to Kayar including1.civil precast foundation 2. cable400 mts 3. cable ... 6. calibration and

1) Supply, installation and commissioning of wheel load measurement in Electronic In-motion Weigh Bridges at CKNI and to be installed at Kayar. 2)Shifting of EIMWB from BPQ to Kayar including1.civil precast foundation 2. cable400 mts 3. cable ... 6. calibration and

1) Supply, installation and commissioning of wheel load measurement in Electronic In-motion Weigh Bridges at CKNI and to be installed at Kayar. 2)Shifting of EIMWB from BPQ to Kayar including1.civil precast foundation 2. cable400 mts 3. cable ... 6. calibration and

Wheel Profile Gauge as Per DRG No. SKDL [Wheel Profile Gauge as Per DRG No. SKDL 3592 Alt-6 (For Measurement of Flange Wear, Root Wear, Tread Wear, Tyre Thickness, Wheel Diameter and Flat Spot, Measuring Gauge) with calibration certificate from NABL approved lab shall be submitted along with supply model no- Twg-1. Make - Jyoti, Paragon, MJ Trading and Ganapathy or similar.]

IPMS DRAUGHT SENSORS ALONGE WITH 10 METER CABLE FLANGE JUNCTION BOXES AS PER SCOPE OF SUPPLY MENCTION IN TSP., SERVICE OF ENGINEER FOR CALIBRATION, CALIBRATION DURING HATs OF IPMS, Extra Man Days 1st Year EXTRA MAN_DAYS PER MANDAY CHARGES, Extra Man Days 2nd Year EXTRA MAN_DAYS PER MANDAY CHARGES

ROD WELDING MS COPPER COATED 1/4'' (N3439-000347), SAW BLADE (N3455-000025), BLADE HSS 1'' WIDE 10 TPI HEAVY FOR HACKSAW MACHINE (N3455-000028), BRAZING BLOW PIPE (N3439-003737), ELECTRODES WELDING 5MM DIA FOR MS IN ALL POSITION (N3439-000225)

Custom Bid for Services - COMBINED AMC FOR PROCESSING AND TESTING EQUIPMENTS, Custom Bid for Services - CALIBRATION OF PROCESSING AND TESTING EQUIPMENTS

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - Industry Unit; Electrical System or Installation, CALIBRATION OF METERS; Service Provider

Rotary Pump Blade Replace, Cut Off Switch new Fitting, Rotor Pin new Fitting, Rotor Assy new Fitting, Rotary pump Testing and Calibration

1. Visual inspectoin and checking of all structural components of all machine e.g. Boom assembly,

EPC Turnkey basis for Proposed redevelopment of Vigilance Office Ch Engg Road Office Material Testing Laboratory building at Asphalt Plant Compound on land bearing CS No 1629 of Lower Parel at S K Ahire Marg in G S Ward

550005992 Design, Engineering, Procurement Of Raw Material, Fabrication, Inspection, Testing, Suppl, TPI Inspection As Per Scope, Charges For Obtaining Licenses/consents/statutory Requirements As Per Scope, Spares Set (10% Of Consumables Or At Least 01 In Number For Each Of The Maintenance Item)

Blade Power Saw Size 450 Mm X 40mm X 2mm X14G, Blade Power Saw 450mm X 38mm X 14G X 6TPI, Blade Band Saw Metal Cutting, IS 5030-69 ( 60 rolls ), Blade Band Saw L-3760 XW-27XT-0.9mm TPI 3-4

Fabrication, Testing, and supply of 11-V-101 converter (for MAP Thal) as per the specification sheet, TPI Charges for 11-V-101 converter (for MAP Thal) as per scope of work, Spare RJ Gaskets of each size used including top dome gasket

Supply of 2.5 KV Hand Driven Insulation [Supply of 2.5 KV Hand Driven Insulation Tester (Megger), IR test Voltage: upto 2.5 KV, IR testing range: 0-10000 Mega Ohms, Type: Hand driven anolog type, Metal body with Testing leads and Carring case. ... and Calibration certifiacte. ...

Digital LCR meter 3.5 digit 1999 counts [Digital LCR meter 3.5 digit 1999 counts measuring range Inductance L = 20 micro Henry 20 Henry or above, Capacitance C = 200 pF to 20 mF or above, Resistance R = 200 ohm to 2000 Mega Ohm or above, Along with ... with calibration certificate ...

Supply of 2.5 KV Hand Driven Insulation [Supply of 2.5 KV Hand Driven Insulation Tester (Megger), IR test Voltage: upto 2.5 KV, IR testing range: 0-10000 Mega Ohms, Type: Hand driven anolog type, Metal body with Testing leads and Carring case. ... and Calibration certifiacte. ...

Customized AMC/CMC for Pre-owned Products - VIDAS; Biomerieux; Annual Maintenance Contract (AMC); Six- Monthly; No

Servicing testing and calibration of protective devices at various pumping stations with oil filtration and testing of 750 KVA transformer under Central Zone.

CHLORINE GAS DETECTOR ALONG WITH TRANSMITTER AS PER ATTACHED SPECIFICATION ( ANNEXURE– I), CHLORINE GAS DETECTOR CALIBRATION KIT AS PER ATTACHED SPECIFICATION ( ANNEXURE– I)

1)Dial Snap gauge Range 75-100 mm LC 0.001 [Dial Snap gauge Range 75-100 mm LC 0.001mm with a Digital dial indicator and standard ring of outside measurement. proper casing along with NABL calibration certificate. Material to be procured from OEM or ... NABL calibration certificate. ... NABL calibration certificate. ... NABL calibration certificate. ...

Battery pack for Beamex MC2 multifunction calibrator, Power supply BC05 B for MC2 MC4, Power cord EU for BC05 B, PGM Calibration Pump 0 to 20 bar, PGM spare parts set, PGL calibration pump complete kit, Repair kit for calibration pump minus 400 to 400 mbar PGL silver spare part set, 40 bar pressure T hose set 1.5 m, Test leads for MC2, Test clips, Connector cable set EXT cable MC2, Test leads TC to banana male, Adapter Set suitable for all above pumps and accessories

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - Industry Unit; Electrical System or Installation, TESTING AND CALIBRATION OF THE METERS; Service Provider

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - Industry Unit; Electrical System or Installation, TESTING AND CALIBRATION OF THE METERS; Service Provider

AS PER TENDER DOCUMENTS

calibration Weights or Weights Sets (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller OEM Authorization Certificate, Additional Doc 1 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6984044 Dated : 10-12-2025 Bid Document 1/7 Number of Auto Extension count 3 Bid to RA enabled No RCM Applicable Yes Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

Tyre defect gauges for BG coaches of size 22 mm as per RDSO specification plate 38, rule No.2.8.4 of IRCA, made of 4mm thick hard alloy steel plate. Note(1) Gauge made tool (steel hardness) to be 45/55 HRC, (2) Calibration Certificate to be supplied along with material for every gauges separately. (3) Material to be supplied in individual wooden storing box with handle for carrying.

RATCHET TYPE STEEL TORQUE WRENCH WITH SQUARE DRIVE RANGE 10 TO 70 NM,1/2 INCH SQUARE DRIVE,OVER ALL LENGTH MINIMUM 480 MM, LIMITING DIRECTION CLOCK WISE AND COUNTER CLOCK WISE, LEAST COUNT MAXIMUM 2 NM, MATERIAL STEEL , GRIP MATERIAL STEEL, FINISHED ... WITH CALIBRATION CERTIFICATE ...