Transportation Tenders in Punjab

FLOOR END PROFILE,L=2000MM, as per Drawing: LW41112, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE ITEM SHOULD BE PACKED WITH A

FLOOR END PROFILE,L=2000MM, as per Drawing: LW41112, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE ITEM SHOULD BE PACKED WITH A

SET OF HAND RAIL FOR LHB DSLR COACHES, as per Drawing: MPLHRLWLRM501 VERSION 3, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE I

FLOOR END PROFILE,L=2000MM, as per Drawing: LW41112, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE ITEM SHOULD BE PACKED WITH A

TRAYS FOR LV PANEL IN LSLRD COACHES FOR AMRIT BHARAT RAKE, as per Drawing: CC72094, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. T

Transportation work at Cluster Saroya

Custom Bid for Services - OPERATION OF IN-HOUSE STATUTORY TESTING & PAINTING FACILITY AT LPG BOTTLING PLANT, GOINDWAL SAHIB Similar Category Haulage & Housekeeping Services for IOCL

TRANSPORT OF FOODGRAINS, STOCK ARTICLES, GUNNY BALES ETC

TRANSPORT OF FOODGRAINS, STOCK ARTICLES, GUNNY BALES ETC

TRANSPORT OF FOODGRAINS, STOCK ARTICLES, GUNNY BALES ETC

TRANSPORT OF FOODGRAINS, STOCK ARTICLES, GUNNY BALES ETC

Hiring of tempoos and trucks for supply panjiri wmp ghee and other milk products to other plants branches army CDPO and other parties

FLOOR END PROFILE, L=2M, as per Drawing: LJ41154 ALT a, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE ITEM SHOULD BE PACKED WIT

HOSE CLAMP 55, as per Drawing: IS:4762-1984, TABLE-1, AISI304, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE ITEM SHOULD BE PAC

FLOOR END PROFILE L=2M FOR LHB NON AC CHAIR CAR COACHES, as per Drawing: LJ41154, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE

SPRING WASHER B8, COATING AS PER MDTS 057, as per Drawing: IS:3063-1994 GRADE 60C6, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. T

CABLE DUCT A 45 COVER,IN STANDARD SLOT GREY, as per Drawing: CAT NO CDA45SG, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE ITEM

FLOOR END PROFILE L=2M FOR LHB NON AC CHAIR CAR COACHES, as per Drawing: LJ41154, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE

SUPPLY AIR DUCT FOR LHB GS AC COACHES, as per Drawing: LG44344, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE ITEM SHOULD BE PA

FLOOR END PROFILE L=2M FOR LHB NON AC CHAIR CAR COACHES, as per Drawing: LJ41154, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE

CURTAIN TAPE WIDTH 25 MM, as per Drawing: IS:6117-1977 VARIETY NO. 4, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE ITEM SHOULD

CABLE BINDER, as per Drawing: CC76129,ALT-A,ITEM-4., Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE ITEM SHOULD BE PACKED WITH A

HOSE CLAMP 120, as per Drawing: IS:4762-1984 TABLE-1, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE ITEM SHOULD BE PACKED WITH

FLOOR END PROFILE, L=2M, as per Drawing: LJ41154 ALT a, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE ITEM SHOULD BE PACKED WIT

MACHINED WASHER A25, as per Drawing: IS:2016-67 TABLE-1, COATING AS PER MDTS-057, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE

FLOOR END PROFILE, L=2M, as per Drawing: LJ41154 ALT a, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE ITEM SHOULD BE PACKED WIT

MACHINED WASHER A25, as per Drawing: IS:2016-67 TABLE-1, COATING AS PER MDTS-057, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE

Goods Transportation service - Monthly Based Service - Outside state; Hiring of One Truck for TRD depots at Lohian Khas under the jurisdiction of ADEE TRD JUC for a period of Three Years; Open Body Taurus

Collection, Lifting, Transportation, Segregationofgarbage; Dry Waste

HEX NIPPLE 40 BORE, as per Drawing: IS:1239(PT-2)-92, TABLE-28, AISI304, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE ITEM SHO

BALL VALVE 1/2", as per Drawing: LW63106 ALT a ITEM 3, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE ITEM SHOULD BE PACKED WITH

WASHER 41 FOR FIAT BOGIES, as per Drawing: DIN 125-1;ST50 E295, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE ITEM SHOULD BE PA

SPLIT PIN 4X22, as per Drawing/Spec. No.: IS:549-2005 St34 COATING AS PER MDTS-057, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. T

WASHER 41 FOR FIAT BOGIES, as per Drawing: DIN 125-1;ST50 E295, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE ITEM SHOULD BE PA

PA SYSTEM FOR HOT BUFFET COACH, as per Drawing: EDTS173,REV-B,COR-4,TYPE-1., Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE ITEM

SPLIT PIN 8X45, as per Drawing: IS:549-2005 St34 COATING AS PER MDTS-057, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE ITEM SH

HEX LOCK NUT M16 HIGH TENSILE, as per Drawing: IS:1364(PART-4)-1992-8, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE ITEM SHOUL

WASHER 41 FOR FIAT BOGIES, as per Drawing: DIN 125-1;ST50 E295, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE ITEM SHOULD BE PA

HEX LOCK NUT M16 HIGH TENSILE, as per Drawing: IS:1364(PART-4)-1992-8, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE ITEM SHOUL

WASHER 41 FOR FIAT BOGIES, as per Drawing: DIN 125-1;ST50 E295, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE ITEM SHOULD BE PA

PA SYSTEM FOR POWER CAR COACH, as per Drawing: EDTS173,REV-B,CORR-3,TYPE-II., Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE ITE

SPLIT PIN 4X36, as per Drawing: IS:549-2005 St34 COATING AS PER MDTS-057, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE ITEM SH

WASHER 41 FOR FIAT BOGIES, as per Drawing: DIN 125-1;ST50 E295, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE ITEM SHOULD BE PA

HEX NUT M22, as per Drawing: IS:1364(PART-3)-1992,6 COATING AS PER MDTS-057, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE ITEM

SPLIT PIN 8X45, as per Drawing: IS:549-2005 St34 COATING AS PER MDTS-057, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE ITEM SH

SPLIT PIN 4X36, as per Drawing: IS:549-2005 St34 COATING AS PER MDTS-057, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE ITEM SH

SPLIT PIN 5X40, as per Drawing: IS:549-2005 St34 COATING AS PER MDTS-057, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE ITEM SH

SPLIT PIN 10X63, as per Drawing: IS:549-2005 St34 COATING AS PER MDTS-057, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE ITEM S

BALL VALVE 1/2", as per Drawing: LW63106 ALT a ITEM 3, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE ITEM SHOULD BE PACKED WITH

BALL VALVE 1", as per Drawing: LW63106 ALT a ITEM 5, Packing Instruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE ITEM SHOULD BE PACKED WITH A