UPS, Inverter & Battery Tenders in Chhattisgarh

Supply, installation of 2KVA online UPS

lead acid battery Lead Acid Battery ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Types of Lead Acid of Battery Lead-Acid Storage Batteries for Motor Vehicles with Light weight and High Cranking Performance conforming to IS:14257/1995 Lead-Acid Storage Batteries for Motor Vehicles with Light weight and High Cranking Performance conforming to IS:14257/1995 Nominal Voltage of Battery (volts) 12.0 Volt 12.0 Volt Material of container Polypropylene Hard Rubber, Fibre Reinforced Plastics (FR P), Polypropylene, ABS Rated Capacity at C20 discharge (AH) 35 Warranty (Years) 4 Years 1 Year, 2 Years, 3 Years, 4 Years, 5 Years Battery Condition Charged - CONSTRUCTIONAL Dimensions (L x W x H) (mm x mm x mm) As per relevant IS Specifications - Volume of Electrolyte (ml) 2100 ML - Weight of Dry Battery (Kg) shall be as per relevant IS: Specn., corresponding Ah Yes. - 1/3 No.of cells per Battery (No.) 6 Cells for 12 Volt battery - CERTIFICATIONS Availability of Test Reports from Central Govt./NABL/ILAC accrediated Lab showing conformity to the specifications Yes - Address of the Lab chennai - Name of the Lab Electronics test center - Test Report No. ETC/2017/UPS0045 - Test Report Date 03/12/2014 - Compulsory Registration (CRS) of BIS for safety as per IS 16046 as applicable. Secondary Cells and (Batteries containing Alkaline or other non- acid Electrolytes-Safety Requirements for Portable sealed secondary cells, and for Batteries made from them for use in portable applications YES - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vivek Srivastav 490006, THQ IG SPL OPS, BSP Hr Secondary School, Opposite SBI- Maroda Uttai Risali sector, Bhilai 10 21 Required No ePBG Required No

lead acid battery Lead Acid Battery ( 4 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Types of Lead Acid of Battery Lead-Acid Storage Batteries for Motor Vehicles with Light weight and High Cranking Performance conforming to IS:14257/1995 Lead-Acid Storage Batteries for Motor Vehicles with Light weight and High Cranking Performance conforming to IS:14257/1995 Nominal Voltage of Battery (volts) 12.0 Volt 12.0 Volt Material of container Polypropylene Hard Rubber, Fibre Reinforced Plastics (FR P), Polypropylene, ABS Rated Capacity at C20 discharge (AH) 70 70 Warranty (Years) 4 Years 1 Year, 2 Years, 3 Years, 4 Years, 5 Years Battery Condition Charged - CONSTRUCTIONAL Dimensions (L x W x H) (mm x mm x mm) As per relevant IS Specifications - Volume of Electrolyte (ml) 6.9 - Weight of Dry Battery (Kg) shall be as per relevant IS: Specn., corresponding Ah Yes. - 1/3 No.of cells per Battery (No.) 6 Cells for 12 Volt battery - CERTIFICATIONS Availability of Test Reports from Central Govt./NABL/ILAC accrediated Lab showing conformity to the specifications Yes - Address of the Lab DELHI - Name of the Lab EXIDE LTD - Test Report No. NA - Test Report Date 02/06/2018 - Compulsory Registration (CRS) of BIS for safety as per IS 16046 as applicable. Secondary Cells and (Batteries containing Alkaline or other non- acid Electrolytes-Safety Requirements for Portable sealed secondary cells, and for Batteries made from them for use in portable applications YES - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vivek Srivastav 490006, THQ IG SPL OPS, BSP Hr Secondary School, Opposite SBI- Maroda Uttai Risali sector, Bhilai 4 21 EMD Required No ePBG Required No

lead acid battery Lead Acid Battery ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Types of Lead Acid of Battery Lead-Acid Storage Batteries for Motor Vehicles with Light weight and High Cranking Performance conforming to IS:14257/1995 Lead-Acid Storage Batteries for Motor Vehicles with Light weight and High Cranking Performance conforming to IS:14257/1995 Nominal Voltage of Battery (volts) 12.0 Volt 12.0 Volt Material of container Polypropylene Hard Rubber, Fibre Reinforced Plastics (FR P), Polypropylene, ABS Rated Capacity at C20 discharge (AH) 80 Warranty (Years) 3 Years 1 Year, 2 Years, 3 Years, 4 Years, 5 Years Battery Condition Charged - CONSTRUCTIONAL Dimensions (L x W x H) (mm x mm x mm) As per relevant IS Specifications - Volume of Electrolyte (ml) 4900 - Weight of Dry Battery (Kg) shall be as per relevant IS: Specn., corresponding Ah Yes. - 1/3 No.of cells per Battery (No.) 6 Cells for 12 Volt battery - CERTIFICATIONS Availability of Test Reports from Central Govt./NABL/ILAC accrediated Lab showing conformity to the specifications Yes - Address of the Lab EXIDE INDUSTRIES LIMITED, DURGA CHAK, HALDIA, MIDANPORE(EA ST)WEST BANGAL-721602 - Name of the Lab EXIDE INDUSTRIES LIMITED - Test Report No. 0983 - Test Report Date 23.10.2016 - Compulsory Registration (CRS) of BIS for safety as per IS 16046 as applicable. Secondary Cells and (Batteries containing Alkaline or other non- acid Electrolytes-Safety Requirements for Portable sealed secondary cells, and for Batteries made from them for use in portable applications YES - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vivek Srivastav 490006, THQ IG SPL OPS, BSP Hr Secondary School, Opposite SBI- Maroda Uttai Risali sector, Bhilai 5 21 EMD Required No ePBG Required No

lead acid battery Lead Acid Battery ( 22 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Types of Lead Acid of Battery Lead-Acid Storage Batteries for Motor Vehicles with Light weight and High Cranking Performance conforming to IS:14257/1995 Lead-Acid Storage Batteries for Motor Vehicles with Light weight and High Cranking Performance conforming to IS:14257/1995 Nominal Voltage of Battery (volts) 12.0 Volt 12.0 Volt Material of container Polypropylene Hard Rubber, Fibre Reinforced Plastics (FR P), Polypropylene, ABS Rated Capacity at C20 discharge (AH) 88 88 Warranty (Years) 3 Years 1 Year, 2 Years, 3 Years, 4 Years, 5 Years Battery Condition Charged - CONSTRUCTIONAL Dimensions (L x W x H) (mm x mm x mm) As per relevant IS Specifications - Volume of Electrolyte (ml) 6800 - Weight of Dry Battery (Kg) shall be as per relevant IS: Specn., corresponding Ah Yes. - 1/3 No.of cells per Battery (No.) 6 Cells for 12 Volt battery - CERTIFICATIONS Availability of Test Reports from Central Govt./NABL/ILAC accrediated Lab showing conformity to the specifications Yes - Address of the Lab EXIDE INDUSTRIES LIMITED, DURGA CHAK, HALDIA, MIDANPORE(EA ST)WEST BANGAL-721602 - Name of the Lab EXIDE INDUSTRIES LIMITED - Test Report No. 0983 - Test Report Date 23.10.2016 - Compulsory Registration (CRS) of BIS for safety as per IS 16046 as applicable. Secondary Cells and (Batteries containing Alkaline or other non- acid Electrolytes-Safety Requirements for Portable sealed secondary cells, and for Batteries made from them for use in portable applications YES - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vivek Srivastav 490006, THQ IG SPL OPS, BSP Hr Secondary School, Opposite SBI- Maroda Uttai Risali sector, Bhilai 22 21 EMD Required No ePBG Required No

Inverter with sine wave output Experience with Government Required 2 Year (s)

Voltas 1.5 Ton 3 Star Inverter (2018) Split AC (183V DZU, White)

1 KVA UPS, Type :Desktop, Portable, Router, PC, Line Interactive UPS, Rating in VA | Watts : 1000 VA, 600 Watts Battery Module:In-Built Battery Module, with ISI Mark Accepted offer : Make/brand - Cybe

110V, 100AH BATTERY BANK (Q3) ()

Supply of 220V, 960AH Medium Discharge Nickel-Cadmium Battery Bank as per POWERGRID TS, Dismantling of Old Battery Bank and Installation and Commissioning of Supplied Battery Bank, Supply of Spare Cells 960AH Rating for above Supplied 220V Battery Bank, ... Nickel-Cadmium Battery Bank as ... 220V Battery Bank , ... Nickel-Cadmium Battery Bank as ... 220V Battery Bank , ... Nickel-Cadmium Battery Bank as ... 48V Battery Bank , ... Nickel-Cadmium Battery Bank as ... 48V Battery Bank , ... Nickel-Cadmium Battery Bank as ... 48V Battery Bank , ... 48V Battery Bank

Desktop Computers (Q2), Online UPS (V2) (Q2)

MDL PWR 68817AX1AA - Inverter for Auxiliary converter as per BHEL part No. ED68817AX1AA.

Inverter with sine wave output Bidder Turnover (Last 3 Years) 1 Lakh (s)

Requirement Of Electrical Inverter With Installation At Site Location Of Tribal Hostel (Q3)

Supply and Servicing of 2 into 7 5KVA Inverter at Switchyard NTPC Sipat

" WELDING MACHINE TYPE OF WELDING MACHINE: INVERTER BASE D IGBT 200A WELDING MACHINE RECTIFIER DOUBLE, " WELDING MACHINE TYPE OF WELDING MACHINE: IGBT INVERTER BASED ARC/TIG WELDING MACHINE OUTPUT CURRENT, " WELDING MACHINE TYPE OF WELDING MACHINE: ... RC/TIG INVERTER BASED ...

KEPRO Rectifier inverter based(IGTB) double bridge type Welding Set, KEPRO Rectifier inverter based(IGTB) double bridge type Welding Set 415V,three Phase with trapping to compensate for variation in input supply

1 - M9222028247 - 100249771, 2 - Erection, Installation, Commissioning for Schedule - 1, 3 - M9222140239 - 100249771, 4 - Erection, Commissioning for Schedule - 3, 5 - M9222994232 - 100260634

Inverter with sine wave output Inverter With Sine Wave Output ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Inverter Governing specification Generally conforming to ... IS:13369, VRLA battery confirming ... * Inverter shall ... * Inverter Efficiency ... The inverters shall ... * Inverter shall ...

Notice Inviting Tender for Two years for Supply of Battery for Akas Terumax RX Syringe Pump for Department of BME under PAC at AIIMS Raipur

SITC of 220V DC, 1800AH Battery Bank including buyback of old Battery Bank (120 Nos. 2V Tubular Cell) (Q3)

intec Cooling Only 1 Ton 5 Star (ISEER value from >=5 to =5.5) Inverter

intec Cooling Only 2 Ton 5 Star (ISEER value from >=5 to =5.5) Inverter

intec Cooling Only 2 Ton 5 Star (ISEER value from >=5 to =5.5) Inverter

intec Cooling Only 2 Ton 5 Star (ISEER value from >=5 to =5.5) Inverter

intec Cooling Only 2 Ton 5 Star (ISEER value from >=5 to =5.5) Inverter

intec Cooling Only 1 Ton 5 Star (ISEER value from >=5 to =5.5) Inverter

INVERTER BASED MIG/MAG SYNERGIC PULSE WELDING PLANT AIR COOLED TORCH CAPACITY 400 AMP,.

INVERTER BASED MIG/MAG SYNERGIC PULSE WELDING PLANT AIR COOLED TORCH CAPACITY 400 AMP,.

Crux Weld Rectifier inverter based(IGTB) double bridge type Welding Set, Crux Weld Rectifier inverter based(IGTB) double bridge type Welding Set 415V,three Phase with trapping to compensate for variation in input supply

12 V, 100 AH BATTERY BANK (Q3)

Supply, installation and testing of Battery Bank

Inverter with sine wave output Inverter With Sine Wave Output ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Inverter Governing specification Generally conforming to IS:13314 - Rating in KVA & Min. VAH ... IS:13369, VRLA battery confirming ... - Inverter shall ... - Inverter Efficiency ... The inverters shall ... - Inverter shall ...

intec Cooling Only 1.5 Ton 3 Star (ISEER value from 3.8 to 4.39) Inverter, intec Cooling Only 1.5 Ton 3 Star (ISEER value from 3.8 to 4.39) Inverter AC - Variable Speed Wall Mount Split AC

intec Cooling Only 2 Ton 3 Star (ISEER value from 3.8 to 4.39) Inverter, intec Cooling Only 2 Ton 3 Star (ISEER value from 3.8 to 4.39) Inverter AC - Variable Speed Wall Mount Split AC

Daikin Cooling Only 2 Ton 3 Star (ISEER value from 3.8 to 4.39) Inverter, Daikin Cooling Only 2 Ton 3 Star (ISEER value from 3.8 to 4.39) Inverter AC - Variable Speed Wall Mount Split AC

godrej Cooling Only 2 Ton 3 Star (ISEER value from 3.8 to 4.39) Inverter, godrej Cooling Only 2 Ton 3 Star (ISEER value from 3.8 to 4.39) Inverter AC - Variable Speed Wall Mount Split AC

Daikin Cooling Only 2 Ton 3 Star (ISEER value from 3.8 to 4.39) Inverter, Daikin Cooling Only 2 Ton 3 Star (ISEER value from 3.8 to 4.39) Inverter AC - Variable Speed Wall Mount Split AC

Daikin Cooling Only 2 Ton 3 Star (ISEER value from 3.8 to 4.39) Inverter, Daikin Cooling Only 2 Ton 3 Star (ISEER value from 3.8 to 4.39) Inverter AC - Variable Speed Wall Mount Split AC

intec Cooling Only 1.5 Ton 3 Star (ISEER value from 3.8 to 4.39) Inverter, intec Cooling Only 1.5 Ton 3 Star (ISEER value from 3.8 to 4.39) Inverter AC - Variable Speed Wall Mount Split AC

Daikin Cooling Only 2 Ton 3 Star (ISEER value from 3.8 to 4.39) Inverter, Daikin Cooling Only 2 Ton 3 Star (ISEER value from 3.8 to 4.39) Inverter AC - Variable Speed Wall Mount Split AC

LLOYD Cooling Only 2 Ton 3 Star (ISEER value from 3.8 to 4.39) Inverter, LLOYD Cooling Only 2 Ton 3 Star (ISEER value from 3.8 to 4.39) Inverter AC - Variable Speed Wall Mount Split AC

Procurement of central solar inverter interchangeable with existingmodels of AEG(AEG Protect PV 630) and other TMEIC Models(PVL L1000E 2PVL L1000E 2A and PVL L 1000E)

2200001076 110V TP 50A DUAL FLOT CUM BOOST CHARGER, 1600021753 BATTERY BANK, INSTALLATION AND COMMISSIONING OF BATTERY CHARGER WITH BATTERY BANK

Inverter with sine wave output Inverter With Sine Wave Output ( 3 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Inverter Governing specification Generally conforming to ... IS:13369, VRLA battery confirming ... * Inverter shall ... * Inverter Efficiency ... The inverters shall ... * Inverter shall ...

LG Cooling Only 2 Ton 3 Star (ISEER value from 3.8 to 4.39) Inverter AC, LG Cooling Only 2 Ton 3 Star (ISEER value from 3.8 to 4.39) Inverter AC - Variable Speed Wall Mount Split AC

Assistance in maintenance of batteries and inverters of road/ rail weighbridges, Boom Barriers of Dipka Expansion Project for a period of one year (104 jobs in one year) on as and when required basis.

Assistance in maintenance of batteries and inverters of road/ rail weighbridges, Boom Barriers of Dipka Expansion Project for a period of one year (104 jobs in one year) on as and when required basis.

GD D852 A 101: Gate drive Board varnished - For inverter and CHBA GD card in ABB

Online UPS Online UPS ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Rating in KVA (KVA) 15.0 KVA 15.0kva Technology IGBT-PWM with inbuilt isolation transformer MOSFET-PWM with inbuilt isolation transformer, IGBT-PWM with inbuilt isolation transformer, IGBT-PWM without inbuilt isolation transformer Input Power Three phase 300 V - 450V sinewave, 50Hz threephase300v-450vsi newave50hz Output power Single phase 230V +/-1% sinewave 50 Hz singlephase230v-1sine wave50hz Backup time (Minutes) 120 120 Minimum VAH (VAH) 24000 Warranty for UPS (Years) 2 1, 2, 3, 4, 5 Movable trolly for Batteries Without trollery but with rack With, Without, Without trollery but with rack Warranty for battery 2 1, 2 Degree of Protection IP21 IP21, IP20 Cabling 5 meters for input and out put Without With, Without 1/4 Paralleling kit for synchronising Without With, Without Installation and Commissioning Yes - CONSTRUCTIONAL Minimum thickness of M.S.Sheet Enclosure duly painted (mm) 1.2 - Type of Battery SMF-VRLA conforming to JISC:8702(Pt.I, II&III) - FUNCTIONAL Maximum overshoot and Under shoot of output rated voltage 4 - Voltage Regulation from no load to full load (%) /= 3% - 20% Overload limit for minimum 10 minutes Yes - Overall Efficiency (%) >/=90% - Total Harmonic Distortion(THD) (%) Maximum 3% - 50% Overload limit for minimum 1 minutes Yes - PROTECTION Protection for under voltage at battery terminal at 10.5V per 12 V battery. Yes - Protection of Over voltage, Short Circuit & over load at UPS output terminal Yes - METERING AND INDICATIONS Digital Metering in UPS for AC Input Voltage, Output AC Volt age, Current, Frequency, Battery Voltage and Current Yes - Indicators for mains presence, Battery charging and discharging, Output Over Load, Low Battery Voltage Yes - REPORTS AND CERTIFICATION Damp Heat : in accordance with IS:9000(part 5/sec.2)1981 at Temperature of 40 degree C, two cycles of (12+12) hours each 2007) Yes - 2/4 Dry Heat Test : in accordance with IS:9000 (part 3/sec.5)1977 (reaffirmed 2007) at 55 degree C for 16 hrs Yes - Cold Test : in accordance with IS:9000 (Part 2/Sec.4)1977 (Reaffirmed 2007) at -10 degree C for 4 hrs. Yes - Availability of the Type Test Report from Central Govt. NABL/ILAC Accredited lab covering all technical requirements. Yes - Type Test Certificate No. QVC/CE/LVD/2015-16/0 44 - Type Test Certificate date 30/11/2015 - Name of Lab QVC CERT - Address of Lab delhi - As per Meity (Government of India) guidelines UPS shall have valid BIS CRS certifications as applicable Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Chandramani Prasad 492001, O/o Executive Engineer, (E&M) Public Works Department Sirpur Bhawan Parisar, Raipur. (C.G.) 1 15 EMD Required No ePBG Required No