Valves Tenders in Jammu and Kashmir

Up-gradation, strengthening of suction pipeline and providing / fitting of control valves at lift irrigation station Pandorian.

Repairs to the rising main by way of replacement of damaged control valves at WSS Zawoora-II

Copper Alloy Gate Valve for Waterworks Purpose as per IS 778 (Q3)

sj Split Wedge Brass Gate valve of nominal size 80 millimeter mm.

Copper Alloy Gate Valve for Waterworks Purpose as per IS 778 (Q3)

Procurement of Electrical Actuator Operated Butterfly Valve DN350MM for Cooling Water System of Power House of Dulhasti Power Station

P/F of new components against old damaged/worn out components of 914mm dia. reflux valves/ sluice valve/ RE joint by way of fabrication of flap doors along with other accessories/works at LIS TPH Jammu, for improvement of valves. 1 Nos. valves set.

Gate Valve 2 5 inch Brass, Pan Tilt Motor With Controller, Color Paper Soft, Register 600 Pages, Epson Ink No 664, Photocopier paper A4

LV7/TATA 2576-4379-0118 TRAILER CONTROL VALVE, LV7/STLN (VF) X-7489100 55A ALTERNATOR POLY-V ALT X- 7489200

Unbranded Copper Alloy Gate Valve For Waterworks Purpose Screwed, Unbranded Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 25 mm Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa Solid Wedge Type

Unbranded Copper Alloy Gate Valve For Waterworks Purpose Screwed, Unbranded Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 25 mm Class 2 Valve : Suitable for cold working pressure up to 1.6 MPa Solid Wedge Type

Unbranded Copper Alloy Gate Valve For Waterworks Purpose Screwed, Unbranded Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 40 mm Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa Solid Wedge Type

CONTROL VALVE REP KIT, WATER SEPARATOR FILTER, OIL FILTER ELEMENT, AIR FILTER ELEMENT, HYDRAULIC STEERING PIPE, HYDRAULIC PUMP OIL SEAL, HYDRAULIC CYLINDER REP KIT, UJ KIT, CROSS HOLDER, FAN BELT, HYDRAULIC STEERING PISTON SEAL

Repair/Replacement of Pumping System, Switchgear, Pipe Line and Control Valves at Distribution Area Under GE (Utilities) Udhmapur

Repair/Replacement pipe lines control valves, pumping system and switchgear installed at Tawi area under GE (Utilities) Udhampur.

Repair/Maintenance of filter beds, clarifloculator, pressure filters and control valves at various locations under GE (Utilities) Udhampur

Providing and Fitting of mechanical Control Valves for WSS Well No.01 and 10 of Sub-Division Peripheral

Repair/Replacement pipe lines control valves, pumping system and switchgear installed at JIB area under GE (Utilities) Udhampur.

Repair/Replacement pipe lines control valves, pumping system and switchgear installed at distribution area under GE (Utilities) Udhampur.

Repair Replacement of pumping system, pipe lines control valves and switchgear installed at CHNC under GE Utilities Udhampur

REPAIR AND MAINTENANCE OF EXTERNAL PIPE LINE, SLUICE VALVE, NRV, MOTORS, VOLTAGE STABILIZER, PANELS, STARTERS AND CLEANING AND MAINTENANCE OF UG SUMP, OHT, DUG WELL, FILTER BED, FLUCLATORS WITH CONNECTED ITEMS AT 213 TRANSIT CAMP UNDER GE NAGROTA.

getway Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends, getway Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 25 mm Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa Solid Wedge Type

getway Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends, getway Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 32 mm Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa Solid Wedge Type

getway Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends, getway Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 40 mm Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa Solid Wedge Type

getway Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends, getway Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 50 mm Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa Split Wedge Type

getway Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends, getway Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 80 mm Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa Solid Wedge Type

getway Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends, getway Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 50 mm Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa Solid Wedge Type

getway Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends, getway Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 40 mm Class 2 Valve : Suitable for cold working pressure up to 1.6 MPa Solid Wedge Type

getway Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends, getway Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 32 mm Class 2 Valve : Suitable for cold working pressure up to 1.6 MPa Solid Wedge Type

getway Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends, getway Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 65 mm Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa Solid Wedge Type

getway Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends, getway Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 80 mm Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa Split Wedge Type

getway Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends, getway Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 50 mm Class 2 Valve : Suitable for cold working pressure up to 1.6 MPa Solid Wedge Type

getway Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends, getway Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 80 mm Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa Solid Wedge Type

getway Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends, getway Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 40 mm Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa Split Wedge Type

getway Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends, getway Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 25 mm Class 2 Valve : Suitable for cold working pressure up to 1.6 MPa Solid Wedge Type

MMJ Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends, MMJ Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 100 mm Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa Split Wedge Type

getway Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends, getway Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 50 mm Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa Split Wedge Type

Replacement of damaged Column Pipes and Sluice Valve at different Stations of PHE Mech. Sub Division Kathua.

Replacement by providing and fitting of 150mm dia cast steel sluice valve of pumping station Thill Roun

MMJ Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 40, MMJ Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 40 mm Class 2 Valve : Suitable for cold working pressure up to 1.6 MPa Solid Wedge Type

MMJ Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 40, MMJ Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 40 mm Class 2 Valve : Suitable for cold working pressure up to 1.6 MPa Solid Wedge Type

silver shine Copper Alloy Gate Valve For Waterworks Purpose Screwed, silver shine Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 15 mm Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa Solid Wedge Type

MMJ Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 50, MMJ Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 50 mm Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa Solid Wedge Type

MMJ Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 80, MMJ Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 80 mm Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa Solid Wedge Type

MMJ Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 40, MMJ Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 40 mm Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa Solid Wedge Type

MMJ Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 32, MMJ Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 32 mm Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa Solid Wedge Type

BVI Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 65, BVI Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 65 mm Class 2 Valve : Suitable for cold working pressure up to 1.6 MPa Solid Wedge Type

MMJ Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 65, MMJ Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 65 mm Class 2 Valve : Suitable for cold working pressure up to 1.6 MPa Solid Wedge Type

Repair maintenance of 400 HP, 7.2 cusecs discharge x 94.7 mtr. Head HSC Pump sets and Rubber Expansion joint installed with rising main at different RDs and 250 mm dia NRV and sluice valve at Raya Lift Irrigation Station

Providing, fitting, testing and commissioning of 150mm dia G.I. rising main with control valves