Valves Tenders in Maharashtra

1. SPARE 3/2 WAY CERAMIC SPOOL DIRECTION CONTROL VALVE FOR CZEC H LINE-II PRESSES. MODEL DN6-PN320-P- (Q3), 2. SPARE 3/2 WAY CERAMIC SPOOL DIRECTION CONTROL VALVE FOR CZEC H LINE-I PRESSES. MODEL DN6- PN320-A-T (Q3), 3. SPARE 3/2 WAY CERAMIC SPOOL ... DIRECTION CONTROL VALVE FOR ... DIRECTION CONTROL VALVE FOR ...

DOUBLE CHECK VALVE 3/8 INCH BSP TO RDSO DRG. NO. CONTR-9405-S/13 ALT- 11 OR LATEST,ITEM No.32.

Rubber seal for 1/2'' soft seated check valve AS PER DRG.NO.WR-DHD-MEMU/4-GK-053 SAMPLE TO BE GOT APPROVED

Supply of 15mm vertical check valve(Brass) with both side female threads make ZOLOTO/ARKAY/HP/TBS, RCF Drg. No. LW 63150.

GASKET FOR 1-1/4" TUBULAR CHECK VALVE AS PER SIZE ID-6MM, OD=49MM, THICKNESS=3MM. MATERIAL POLYURETHANE. ACCEPTED - MAKE - CGC--

Supply of NRV and Needle Valve for Aviation Equipments as per tender terms and Specification.

Pneumatic manual operated Ball valves and globe valves and plug valve and needle valves

Set of Items (Gauge temperature, Gauge Pressure, Tachometer, magnetic switch, check valve valve fuel filter, cable, flexible drive) for Cummins Diesel Engine, Model VTA 1710L. Required as Per Annexur

Copper Alloy Gate Valve for Waterworks Purpose as per IS 778 (Q3) Tubes, Tubulars and Other Steel Fittings as per IS 1239 (Part 2 - Steel Pipe Fittings) (Q3)

REPLACEMENT OF AIR VALVE WITH BRANCH CONNECTION FOR SURYA OLD SCHEME IN VASAI-VIRAR CITY MUNICIPAL CORPORATION

Supply of Fire Water System Gate Valve with pneumatic actuator(Air to close and spring to open) and (Q3) ()

Gate valve for Main Transformer of 3 ph. Locos as per ABB ID no. HSTN 40743P001 ACCEPTED MAKE: BVS

GATE VALVE FOR MAIN TRANSFORMER OF ALL 3 PHASE LOCO AS PER ABB ID NO. HSTN 40743P001. MAKE:- BVS

GATE VALVE FOR MAIN TRANSFORMER OF 3 PHASE LOCO AS PER ABB ID NO. HSTN 40743P001 WITH LATEST ALTERATION.

Providing and Fixing MS safety railing for control valves provided on water mains between Mohili to Pachhapur under A E Tansa Section in OC Division

Design, Fabrication, Supply, Installation, Testing and Commissioning of False Key arrangement for control valves installed on water mains in E.S. under A.E.W.W(M)E.S.-I

SPECIAL REPAIRS TO WATER SUPPLY MAIN/DISTRUBUTION LINES, CONTROL VALVES AND ALLIED WORKS AT VARIOUS LOCATIONS OF AF STN MADH ISLAND UNDER GE (AF) THANE

SOLENOID VALVE (POPPET) (Q3), FLOW CONTROL VALVE (Q3)

Set Of Body Studs And Nuts Along With Lock Washer Part No 2324, Gland Packing Set, Tec Seal Ring, Set Of Body Studs And Nuts Along With Lock Washer Part No 26 27 59, Plug along with Stem and Plug Pin, Seat Ring Instrument Relief Valve, Disc Spring ... Relief Valve , ... Relief Valve Tag, ... MIL Valve , ... MIL Valve , ... MIL Valve , ... MIL Valve , ... MIL Valve , ... MIL Valve , ... MIL Valve , ... MIL Valve , ... MIL Valve , ... MIL Valve , ... MIL Valve , ...

150 NB Size gear/lever operated Carbon steel Butterfly Valves, 150 NB Size Non-rising stem Carbon steel Gate Valve along with matching SORF counter, 80 NB Size Non- rising stem Carbon steel Gate Valve, 150 NB SS 316 wafer type Check valves

Sluice Valve For Water Works Purposes (50 To 1200 Mm Size) (V2) As Per Is 14846 (Q3), Copper Alloy Gate Valve for Waterworks Purpose as per IS 778 (Q3), Steel Tubes, Tubulars and Other Steel Fittings as per IS 1239 (Part 2 - Steel Pipe Fittings) (Q3), Unplasticized PVC Pipes for Potable Water Supplies as per IS 4985 (Q3), Rotational Moulded Polyethylene Water Storage Tanks as per IS 12701 (Q3), Commercial CPVC Pipe Fittings (Q3), Steel Pipes for Water and Sewage as per IS 3589 (Q3)

Providing and laying 400 mm dia Sluice Valve and Making Corss Connection on Existing 300 mm dia W/S pipe line at Shahganj ESR

Repair Work Of Emergency Gate Embedments (3 Nos.) Including Guide Channels With Other Related Mechanical Components, Repairs Of Sluice Valve etc. On Bhatghar Dam

panipurvtha vibhag dainadin dekhbhal durustikarita aawshyk 80 mimi, 100 mimi v 150 mimi vyasache pune manpa manytaprapt mekche cast iron sluice valve purvine. purvine.

Removing Leackages, Choke up, Contamination, and Repairing Sluice Valve and Lowering laying pipe line at ward no 54-55-56 in Zone no 2.

Repairing Leakage, Removing Contamination, Removing Chokup And Repairing Sluice valve at New Wasti, Junabazar, Maliwada, Choti Bhadkal gate, Bhangar Galli in Zone No. 01

Providing and laying 250 mm dia sluice valve near shivaji high school road khokadpura And various M And R works in zone no 02

Providning Pipeline System And Repairs And Lowering ,Laying ,Jointing Of Sluice Valve At Village Mauje VAYPUR Tal Shindkheda Dist Dhule - Under 15th Finance Commission

Providing Lowering ,Laying And Jointing Of Sluice Valve And Pipeline At Village Mauje CHIMTHANE Tal Shindkheda Dist Dhule -Under 15th Finance Commission -Grampanchayat Level

Removing leakages ,choke up, Contamination and Repairing sluice valve and lowering lyaing pipe line at ward Nageshwarwadi, Gulmandi, raja bazar in zone no 02

Removing Leackages, Choke up, Contamination, and Repairing Sluice Valve and Lowering laying pipe line at Ward no 85 to 89 in Zone no 6.

Constructing RCC chember with M.S. Plate cover for 700 mm sluice valve at Tulinj khind main line in prabhag samiti D in vvmc area.

Construction of sluice valve chamber in place of remaining old direct outlets, laying pipeline and repairing in Takari main canal Km 76 to 109.

Removing Leackages, Choke up, Contamination, and Repairing Sluice Valve and Lowering laying pipe line at Ward no 23,46, and 47 in Zone no 2.

Construction of sluice valve chamber in place of remaining old direct outlets, laying pipeline and repairing in Takari main canal Km 45 to 75.

Copper Alloy Gate Valve for Waterworks Purpose as per IS 778 (Q3), Bathroom Water Shower (V2) (Q3), Stainless Steel Shelf Rack (Q3), Floor Drain Traps (Q3), Soap Dish - Case (Q4), Water Fittings - Copper Alloy Float Valves (Horizontal Plunger Type) as per IS: 1703 (Q4), Sinks (Q3), Wire Mesh Fabric or Cloth (V2) as per IS 1568 (Q3)

Copper Alloy Gate Valve for Waterworks Purpose as per IS 778 (Q3), Steel Tubes, Tubulars and Other Steel Fittings as per IS 1239 (Part 2 - Steel Pipe Fittings) (Q3), Water Fittings - Copper Alloy Float Valves (Horizontal Plunger Type) as per IS: 1703 (Q4), Enamel, Synthetic, Exterior (A) Under Coating (B) Finishing Paint (V2) as per IS 2932 (Q3)

Krishna Koyna Lift Irrigation Scheme - Providing and Fixing Air Valve and Scoure Valve and Others Repairs Works Of Bhose Gravity Main, Tal.Miraj, dist. Sangli

CHECK VALVE For CSM, MPT Machines. Part No: 90418-A, SUBSTITUTE Part No.: 90418, Make: PLASSER, Firm Offer Make/Brand- PLASSER is accepted

SS 316 PFA LINED BALL VALVE SIZE-50 NB FLANGED END PN 10 AS PER DESIGN STANDARD BS EN 17292 (BS 5351

Unbranded 100 mm Nominal Size Carbon Steel Flanged end,, Unbranded 100 mm Nominal Size Carbon Steel Flanged end, General purpose ball valve

Ball Valve 20 mm for Sanitary Facility (Length 80mm & Nom. Dia 20mm), to RCF Drg No.LW 63106, Alt a, Item No.4.

Custom Bid for Services - Reconditioning of 18 inch NB flanged swing check valve Similar Category Repair and Overhauling Service Repair, Maintenance and Installation of Plant Systems/Equipments

COMPLETE VALVE ASSEMBLY (Q3), Motorized operated Gate Valve (Q3)

REPAIR / MAINT OF PUMPING MACHINERY, LT PANELS, VOLTAGE STABILIZERS , CONTROL VALVES AND CERTAIN E/M MISC WORKS AT ACC and S AREA UNDER GE (S) AHMEDNAGAR

REPAIR/MAINT OF PUMPING MACHINERY, EXT WATER SUPPLY, CONTROL VALVES, PANEL BOARDS AND CERTAIN MISC E/M WORK AT MIC AND S UNDER GE (S) AHMEDNAGAR

Supply of Inline Pressure Control Valve for Aviation Refuellers_ as per tender and Specification Makes _Megitt _Whittekar OR Eaton _Carter

5 POSITION TUMBLER SWITCH / DIRECT ACTION BRAKE ELECTRIC CONTROL VALVE PLASSER PART NO. PVD6/7/23/23-SH MAKE PLASSER

Custom Bid for Services - 617 ASSISTANCE IN CONTROL VALVE MAINTENANCE AND MISCELLANEOUS JOBS AT INSTRUMENT WORKSHOP AT RCF TROMBAY UNIT

Custom Bid for Services - ARC CONTROL VALVE SERVICING 2 YEARS as per BOQ excel Similar Category Repair and Overhauling Service