Valves Tenders

NON RETURN VALVE TYPE 86 R TEFLON SEAT TO CLW DRG NO 0/3/65/363 ALT 2.

1-1/4 INCH NON-RETURN VALVE 86R AS PER CLW DRG. 0/3/65/363 ALT-2

1.25 inch Non-Return valve assembly as per S.C. Rly.Drawing No. A2/EL/Conv/2666. ACCEPTED MAKE: RECON

Heavy Duty Gunmetal Non-Return Valve (Horizontal), Size-1/2 inch (15mm) product standard as per IS:778.

NON RETURN VALVE, Plasser Part No. HY151.33/5BAR16. Make: Plasser. Warranty: Six months from the date of supply.

1 1/4" Non return valve type-86R with Teflon sheet Specification :- CLW Drg.no.- 0/3/65/363

1 1/4 inch Non-Return valve assembly as per S.C. Rly. Drawing No. A2/EL/ Conv/2666.

TENDER FOR SUPPLY OF 12-INCH DIAMETER; 150 CLASS SWING TYPE NON-RETURN VALVE AT BPCL PEETHAMPUR LPG

BALL VALVE 1/4" NPTF (Q3), NEEDLE VALVE 1/2" NPTF (Q3), BALL VALVE 1/2" NPTF SS316 (Q3), NEEDLE VALVE 1/4" NPTF (Q3)

26304601221-ENTRY AND EXIT SIDE CLAMP FENCE HYD CYL, 26304601391-SEAL KIT FOR ENTRY AND EXIT CLAMP FENCE CYL, 26304605080-CHECK VALVE OF MODEL 4CT- 06-A-21, 26304605150-VICKERS FLOW CONTROL VLV F3- FCG-03-28-22, Dummy line -please do not quote for this item

Procurement of ISI Marked Sluice Valve conforming to IS 14846

PNEUMATIC CONTROL VALVE STEAM 8 KG/CM2 TO 1.5KG/CM2 GLOBE 3 INCH AS PER SPECIFICATION ATTACHED, COMPANION FLANGES FOR THE PNEUMATIC CONTROL VALVES

BUTTERFLY VALVE 4" # 150 AL. BRONZE LEVER* (Q3), BUTTERFLY VALVE 6" 150# NI-AL-BRONZE FI* (Q3), 2 WAY MANIFOLD VALVE SS316 6000PSI 1/2" * (Q3), FIRE 3 WAY INLET 3 WAY INLET FOR FIRE B* (Q3)

Supply of D.I Pipes/C.I Valves/Gunmetal Gate Valve etc. to Store Division, APWD, Port Blair

CONTROL VALVE, AIR DRYER ASSY, CLUTCH CYL ASSY, TWO WAY VALVE, POLE SCREW

MANUAL BALL VALVE - 4 INCH, 600# #, FE (Q3)

1" BALL VALVE FOR DRAIN, NTPC VINDYACHAL, G6A1X30288

1" BSP CS BALL VALVE, PRESSURE CL 300

Urgent replacing of damaged sluice valve and Air valves in various distribution lines and pumping lines in Mahe Region

supply of various sizes Sluice valve spindle rods and nuts for maintenance Sluice valves in AE-3(WS)Section

Supply, Delivery and fixing of sluice valve, non return valves at 2 ELSRs in Sri Sardar Vegulla Veerraju Nagar

3 inch ON-OFF type Ball Valve (Q3), Spares for 3 inch ON- OFF type Ball valve (Q3), 2 inch ON-OFF type Ball Valve (Q3), Spares for 2 inch ON-OFF type Ball Valve (Q3)

LOADER CONTROL VALVE SEAL KIT, EXCAVATOR CONTROL VALVE SEAL KIT, BRAKE FLUID CONTAINER, NIPPLE GREASE, GAS CHARGING VALVE

Replacement of 600mm dia DI Butterfly valve in place of damaged 600mm dia CI Sluice valve on existing 600mm dia MS water supply inlet/Outlet main Opp Shilparamam under Madhapur Section, Sub Div-I, OM Division-XV.

Fabrication, Erection, Testing and Commissioning of operating platform by suitable size M.S. Angle/Square pipe with chequered plate for inspection and safe operation of pump set and allied accessories i.e. Sluice valve, Butterfly valve AS PER BOQ.

Procurement of Valve trim set & repair kit of M/s Forbes Marshall ARCA Pvt. Ltd make control valves

4" X 600 CL PLUG VALVE (Q3), 6" X 150 CL GATE VALVE (Q3), 4" X 300 CL GATE VALVE (Q3), 4" X 150 CL GATE VALVE (Q3), 3" X 600 CL GATE VALVE (Q3), 2" X 300 CL GATE VALVE (Q3), 2" X 150 CL GATE VALVE (Q3), 4" X 600 CL CHECK VALVE (Q3), 4" X 300 CL CHECK VALVE ... CL CHECK VALVE (Q3), ... CL BALL VALVE (Q3)

BODY GASKET FOR IL MAKE CONTROL VALVE, PLUG STEM SUB ASSEMBLY FOR IL MAKE CONTROL VALVE, SEAT RING FOR IL CONTROL VALVE, GLAND PACKING FOR IL CONTROL VALVE

Control Valve as per RFQ Item 0010, Control Valve as per RFQ Item 0020, Control Valve as per RFQ Item 0030, Control Valve as per RFQ Item 0040

L806219750009001 DEAERATOR PRESSURE CONTROL VALVE PV-269B, L806219750009002 MAKE UP WATER FLOW CONTROL VALVE LV421B, L806219750009003 RETURN CONDENSATE FLOW CV PASS-1 HV-453B, L806219750009004 RETURN CONDENSATE FLOW CV PASS- 2 HV-XXXB, L806219750009005 MANDATORY SPARES, L806219750009006 COMMISSIONING SPARES

Procurement of Concentric Butterfly Valve without actuator (Manual)for Baitalpur ToP Project under UPSO-I

butterfly valve - as per IS 13095 (Q3), 4" Fluid Storage Tank End Connection Assembly (Q3)

Motorized Temp Control Valve (W90418113033) (Q3), Motorized Temp Control Valve (W90418113041) (Q3), Position Transmitter for cold Gas Temp Control Valve (W90418113068) (Q3), Position Transmitter for Primary Water Temp Control Valve (W90418113076) (Q3)

GREASE GUN PNEUMATIC CAPACITY 5 KG, BOLT ASSEMBLY HEAD STYLE HEXAGONAL, SLUICE VALVE HEAVY DUTY 6 inch by 150MM, CUTTER TYPE ROTARY COMMERCIAL SIZE H5, MS FORGED HEAVY DUTY TURN BUCKLE 5 TON CAPACITY, SAW TYPE CUTTING DIMENSIONS 14 INCH, VALVE CHECK ... TYPE NON RETURN , ... RETURN, VALVE TYPE ...

Control Valve

Control Valve

Control Valve

Making of Sluice Valve, making of coupling, bearing housing and bearing for ADI Colliery

Supply of Ball Valve along with accessor [Supply of Ball Valve along with accessories as per annexure attached.]

Screwed Ends brass materials Ball Valve Size 2". GeM contract's description: Unbranded screwed ends brass material ball valve.

Plug valve and ball valve for IBFPL SMT Ops

SWAGELOK OR BUTECH MAKE NEEDLE VALVE AND BALL VALVE

Supplying of MS pipe and different M.J. specials sluice valve including aligning laying an sluice valve and construction of sluice valve chamber including providing FHTC retrofitting (left out portion) at Ratibati village under Ratibati

TC9765090951-VACCUM BREAKER CONTROL VALVE (Q3), TC9765090960-VACCUM BREAKER CONTROL VALVE - SPARES (Q3)

HIGH PRESSURE CHECK VALVE WITH FABRICATED HOUSING

CHECK VALVE FOR BARREL COLLAPSING OTT COILER

API 598 CHECK VALVE 900 CLASS (Q3)

GATE GLOBE CHECK VALVE IOCL PANIPAT MEGHA

POH KIT FOR CHECK VALVE WITH CHOKE.

CHECK VALVE 1"( one inch) for locomotive