Valves Tenders in Tamil Nadu

SANDER MAGNET VALVE COMPLETE WITH BRACKET TO DLW DRG.NO.TPL-8720 ALT-A OR LATEST.

IDENTIFICATION TAG FOR DISTRIBUTOR VALVE AS PER J&TD.CW.PER SR. DRG. NO. SK 775.

DRAIN VALVE ASSY -1/4 AS PER ELGI PART NO: B139201 firms offer:ELGI make

KIT INLET VALVE RR to ELGI Part No.072403729 or similar. Accepted Make CEC

INLET VALVE ASSEMBLY TO M/S.ELGI.PART.NO.A070072/KPC DRG.NO.096.50.432.50 FOR ELGI/KPC UPGRADED COMPRESSOR.

Saftey valve assembly 3/8"BSP to ELGI. Drg. No. A 070025 MAKE: ELGI

Stationary Valve Regulated Lead Acid Batteries (V2) as per IS 15549 (Q3) ( PAC Only )

Breather valve assembly as per ELGI Part No. A020030 for RR20100 compressors.Make: ELGI only.

Relay Valve for KBIL Tri plate panel as per KBIL part no. II46448/001.

LIMITING VALVE COMPLETE TO WSF PART NO.C 74800/1, SET AT 3.5 KG/SQ.CM.

Overhauling kit for Feed valve (760533 / KP0698141) of Electric CCB for 3 Phase Locomotives

Small Sized Valve Regulated Lead Acid Batteries as per IS Jisc 8702 - 1 (Q3)

Stationary Valve Regulated Lead Acid Batteries (V3) Conforming To IS 15549 (Q3) (3 (3 ))

STARTING VALVE BUSH TO DRG NO. 306-19-2(AS PER DRAWINGS AND SPECIFICATIONS)

Stationary Valve Regulated Lead Acid Batteries (V3) Conforming To IS 15549 (Q3) (3 (3 ))

KITCHEN SYSTEM CYLINDER (10 FLOW POINT) W/VALVE- NFKS10: NFR 10R WITH REQUIRED ACCESSORIES

LOCKING NUT FOR MAGNET VALVE (3103C) AS PER DRG. NO: TRS/ACL/P/643.

COMPRESSION SPRING FOR MG 6/6A VALVE OF TAP CHANGER & GASKET FOR TAP CHANGER

Pressure Relief Valve’ s T3 model no of contacts: 2 (1 NO+ 1NC) Micro switch, Pressure Relief Valve’ s T6 model (150 mm) no of contacts: 2 (1 NO+ 1NC) Micro switch

30-37LITRE BLADDER WITH GAS VALVE SET FOR HP BYPASS ACCUMULATOR FOR OSU TYPE: OV32, 10 LIT BLADDER WITH GAS VALVE FOR HP-BYPASS SYSTEM QUICK OPEN/CLOSE ACCUMULATORS OSU TYPE: OV32

Providing Sulice Valve at Periyapatti west Swami Nagar in Ward no.37

MTPS I CA Fire Protection Checking of Deluge valves Cleaning of spray nozzles and Frangible glass bulb detectors in Emulsifyre system of GT UAT MOT COT and DOT of UnitI to IV and ST I and II during Unit Annual Overhauling period of 2019 20

VALVE GUIDE (STANDARD SIZE) TO DRG NO. 306-17-5, E- HOT UPSET FORGING OF BLANKS FROM DIA 24MM BRONZE

Customized AMC/CMC for Pre-owned Products - High Pressure Governor Valves; Bharat Heavy Electricals Limited; Comprehensive Maintenance Contract (CMC); Not Applicable; Yes

Unbranded General Purpose Ball Valves Full bore Pattern Internal Screw Threaded (Taper) conforming to IS 554 NA 1 inch x 39 mm

TTPS ES INSTN I Overhauling of servo Valves for HP LP Bypass system during Unit overhaul period 2024 2025 in Unit III

TTPS Mech II TM II KWU Turbine Inspection overhauling and commissioning of actuators of Steam line valves during the overhaul 2020 2021

MTPS I TM Unit II Overhauling of Valves in Feed Water Main Condensate and Extraction Steam lines during Annual Overhauling 2022 23

TTPS Mech II TM II Unit V KWU Turbine Cleaning of MOT and overhauling of various size valves during overhaul 2024 2025

Engaging the Contract labour for Operation of Sluice Valves in Wards.90 at Kuniyamuthur area Water Supply Distribution,South Zone,Coimbatore corporation.

MTPS I TM Unit I Overhauling of Valves in Feed Water Main Condensate and Extraction Steam lines during Annual Overhauling 2021 22

MTPS I BM Unit IV Boiler pressure parts AOH 2021 22 Maintenance of boiler drum and all safety valves and allied works

Tender for Comprehensive Repair, Replacement, Testing and Painting of Pipelines, Valves and Associated Structural Components at HBL IVC Complex, Chengalpattu, Tamil Nadu.

MTPS I TM Unit III Overhauling of Valves in Feed Water Main Condensate and Extraction Steam lines during Annual Overhauling 2021 22

TTPS MechII TM I UnitI Inspection overhauling and commissioning of actuators of Feed water Steam line valves during annual overhaul 2024 2025

MTPS I TM UNIT IV Overhauling of Valves in Feed Water Main Condensate and Extraction Steam lines during Annual Overhauling 2020 21

Supply of Various types of Valves for Unit 4 and 5 Ash Slurry Pumps Ash Water Pumps and its allied pipe lines

TTPS MechII TM I Unit III Overhauling of steam and condensate valves of Turbine Regeneration system for the forthcoming overhaul 2022 2023

TTPS MII BM Unit III Inspection overhauling and commissioning of actuators of high pressure valves in boiler during the overhaul 2023 2024

TTPS Mech II TM I Unit III Overhauling of HP LP by pass valves and CRH NRVs during annual Overhaul 2024 2025

TTPS Mech II TM I Unit I Overhaul 2020 21 Overhauling of Turbine Lub oil system seal oil system Valves and equipments

MTPS I BM Unit IV Boiler Pressure parts AOH 2020 21 Maintenance of boiler drum and all safety valves and allied works

Engaging the Contract labour for Operation of Sluice Valves in Wards.93 at Kuniyamuthur areas Water Supply Distribution ,South Zone,Coimbatore corporation.

TTPS Mech II TM I Overhaul 2019 20 Unit II Overhauling of Turbine Lub oil system seal oil system Valves and equipment

TTPS M II TM I Unit II Overhauling of HP LP by pass valves and CRH NRVs during the forthcoming annual overhaul

Engaging the Contract labour for Operation of Sluice Valves in Wards.87 at Kuniyamuthur area Water Supply Distribution,South Zone,Coimbatore corporation.

MTPS I TM Unit IV Overhauling of Valves in Feed Water Main Condensate and Extraction Steam lines during Annual Overhauling 2021 22

MTPS I TM Unit III Overhauling of Valves in Feed Water Main Condensate and Extraction Steam lines during Annual Overhauling 2022 23

TTPS Mech II TM I Unit I Overhauling of steam and condensate valves of Turbine Regeneration system for the year 2020 21

TTPS Mech II TM I Overhaul 2021 22 Unit III Overhauling of Turbine Lub oil system seal oil system Valves and equipments