Valves Tenders in Uttar Pradesh

Lubricating oil for centrifugal compressor, FILTER OIL CENTRIFUGAL COMPRESSOR, VALVE SAFETY, O RING KIT, G ROTOR PUMP, KIT OIL PUMP O RING PART, FLEXIBLE COUPLING, Check valve Kit, BEARING HIGH SPEED REAR, BEARING HIGH SPEED FRONT, BRG H S THRUST INACTIVE, BRG H S THRUST ACTIVE, SEAL HIGH SPEED SHAFT, GEAR LOW SPEED, BEARING LOW SPEED REAR, BEARING LOW SPEED FRONT, BEARING LOW SPEED THRUST

M3799620400: GLV-25NB: # 800: CS: COMP V/V ASSY, M3799626800: NRV-25NBCL800: COMPLETE ASSY

BALL VALVES

ROUGH M/CD FORGING FOR VALVE CONE (HW-289.92) -- ITEM AS PER DRG. HW-289.92. F WITH MATL. HW19390 REV (Q3), ROUGH MACHINED FORGING FOR VALVE SPINDLE (HW-355.34) -- ITEM AS PER DRG. 21230525999 REV. 00 WITH MAT (Q3)

POWERTECH ENGINEERS CKD MAKE Solenoid Valve With TB, Model: FS4-06-4B AC240V, 50Hz, Port Size 3/4" NPT ( 3 Unit ), CKD MAKE Solenoid Valve With TB, Model: FS5-10-4B AC240V, 50Hz, Port Size: 1''NPT ( 2 Unit )

GI Union 20 mm, GI Reducing Tee 25 mm X 20 mm, GI Reducer Tee 25 mm X 15 mm, GI Reducer Tee 20 mm X 15 mm, GI D Joint 100 mm, GI D Joint 80 mm, GI D Joint 50 mm, GI D Joint 40 mm, Clamp 100 mm with nut bolt, Clamp 80 mm with nut bolt, Clamp 50 mm ... bolt, Gate Valve Brass ... mm, Gate Valve Brass ... mm, Gate Valve Brass ...

Drain Valve as per Drg. No. OFKR/C/0079, Lock as per Drg. No. OFKR/C/0080, Stopper as per Drg. No. OFKR/C/0085, Screw as per Drg. No. OFKR/C/0084, Bolt as per Drg. No. OFKR/C/0081

PIPE CPVC SMLS 3IN S80 ASTM F441, PIPE CPVC SMLS 0.75 IN S80, PIPE CPVC SMLS2 0.5 IN S80, PIPE CPVC SMLS 1IN S80, PIPE CPVC SMLS 1 0.5IN S80, PIPE CPVC SMLS 2IN S80, PIPE CPVC SMLS 4 IN S80, FL SKT CPVC 3 by 4IN CL.150 S80, FL SKT CPVC 2.5IN CL.150 ... pack, VALVE DIAPH ... PSI, VALVE DIAPH ... PSI, VALVE DIAPH ... PSI, VALVE DIAPH ...

3/2X1/8 Pneumatic Valve Sub-Assy to drg. no. 176-6318 for Pneumatic Loading Assembly of Sharang Ordna

ROUGH M/CD CASTING FOR VALVE CONE (HW-169.35) -- ITEM AS PER DRG. 31120227901 REV. 02 WITH MATL. HW195

O RING (ID-28.17 MM X WIDTH 3.53 MM) AS PER FTRTIPL PART NO-003703500A FOR UNLOADER EXHAUST VALVE.

BASE GASKET FOR MAGNET VALVE for E.P. Contactor & Reverser for locos . As per CLW Drg.No. 4TWD.111.020 alt-5.

PVC Push Type Flushing Valve Size: 25 mm Inner Dia as per Drawing No. ICF/SK3-6- 3-128

ROUGH M/CD CASTING FOR VALVE CONE (HW-169.35) -- ITEM AS PER DRG. 31120227901 REV. 02 WITH MATL. HW195

Line No. 08 - Supply of brass scrubber valve ISI mark 100 mm dia (80 No.) as per tender notice.

SILVER SHINE (BLUESTAR SANITARY INDUSTRIES PVT LTD) 15, SILVER SHINE (BLUESTAR SANITARY INDUSTRIES PVT LTD) 15 Angle stop valve

e-TENDER FOR THE SUPPLY OF ITEMS (N 95 MASK WITHOUT VALVE) TO UTTAR PRADESH MEDICAL SUPPLIES CORPORATION LIMITED

"PROTECTION PLATE FOR DISTRIBUTOR VALVE AS PER JHS DRG. NO. NCR-JHS/SK-2791, ALT. 2 ITEM NO. 01."

3/2X1/8" PNEUMATIC VALVE SUB-ASSY TO DRG. NO. 176- 6318 FOR PNEUMATIC LOADING ASSEMBLY OF SHARANG ORDNA

3/2x1/8" Pneumatic Valve Sub-Assy to Drg. No. 176-6318 for Pneumatic Loading Assembly of Sharang Ordna

Pressure Reduction Valve Sub Assy. to drg. no. 372-232 Rev A for Pneumatic Loading Assembly of Sharan (Q3)

HYDRAULIC ROTATING CYLINDER WITH SAFETY VALVE SIZE: 200 MM GMT MODEL NO. : 200 CH-S STROKE: 50 MM OR

VALVE FLAT FOR AUX. COMPRESSOR CRC-150 TO ELGI Pt. NO. 031043A as per Drg.No. ELGI Pt. No. 031043A

SET OF VARIOUS TYPES OF PROPORTIONAL VALVE (01 SET CONSISTING OF 07 ITEMS) AS PER ANNEXURE- A , MAKE-MOOG

3/4 inch Safety Valve set at 10.5 kg/sq.cm CLW Specn.no.-0/3/65/93 with latest Alt.

Over hauling Kit for C3W Distributor Valve for LHB coaches consisting of items to Faiveley Part No. FT0050398-033

Line 01 Supply of C.I.-D.F. Reflux valve ISI mark 200 mm dia (20 No.) as per tender notice.

Line 02 Supply of C.I.-D.F. Reflux valve ISI mark 100 mm dia (40 No.) as per tender notice.

Custom Bid for Services - SITC OF VALVE UNSCREWING MACHINE Similar Category Operation And Maintenance Of Other Machines And Plants

Custom Bid for Services - Job contract for replacement of FDV 12 Valve in 500 MW unit of NTPC Unchahar

PILOT VALVE (HW-368.97) -- FULLY M/CD ITEM AS PER DRG. 31323801009 REV. 00 WITH MATL. AA10502 REV. 09

SET OF VARIOUS TYPES OF PROPORTIONAL VALVE (01 SET CONSISTING OF 07 ITEMS) AS PER ANNEXURE- A , MAKE-MOOG

Line4 Supply of Reflux valve of different size as per IS 5312 Part 1 2004 and its latest amendment

eTENDER FOR THE SUPPLY OF DRUGS/ITEMS (N 95 MASK WITHOUT VALVE) TO UTTAR PRADESH MEDICAL SUPPLIES CORPORATION LIMITED

REPAIR AND MAINT OF RUSTED CI GI AND DI PIPE LINES VALVE AT VARIOUS PLACES UNDER GE(W) MATHURA

SET OF VARIOUS TYPES OF PROPORTIONAL VALVE (01 SET CONSISTING OF 07 ITEMS) AS PER ANNEXURE- A , MAKE-MOOG

PILOT VALVE (HW-290.21) -- FULLY M/CD ITEM AS PER DRG. 21140205013 REV. 01 WITH MATL. HW10673 REV. 0

VALVE LEVER - FABRICATED AND M/CD ITEM AS PER DRG. HY-378.01. 16/00 WITH MATL AS PER DRG.

PILOT VALVE (HW-172.163) -- FULLY M/CD ITEM AS PER DRG. 31172001041 REV. 02 WITH MATL. HW10584 REV. 04

PINCH VALVE COMPATIABLE WITH AKO MAKE MODEL NO VMP-40 MAKE BIO VACUUM EVACUATION TOILET SYSTEM OF AMIT ENGINEERS.

Refrigent hot gas by pass valve-model no-KVC15034L0147, MAKE- Dantoss ,Letoo. Make/Brand: model no-KVC15034L0147, MAKE- Danfoss

SLOAP Fill Valve Push Buttons tyep Ball Cock/Toilet Water Tank Fittings For Single Piece/One Piece Western Commode

Rubber Part Kit for Feed Valve F-2 consisting of 11 items .Drg.NO.SKDP-2546,alt-nil (Item No5,6,8,19,24,25,26,28,29,31& 46)

Valve Low Pressure For Low Water Cut off.To EMD Pt No - 8412324. as per Drg.No. GM Part No - 8412324.

F- 1 SELECTOR VALVE RDSO SPEC. NO. MP.0.01.00.38, REV. 01, JUNE 2024 AND RDSO DRG. NO. SKDP-4154

POH Kit for C3W Type Distributor Valve comprising of 41 items. Detailed description is as per attached Annexure A.

GASKET (FLANGE AT KLIPFEL VALVE) TO DLW DRG. NO. 15D76307-1, ALT-F, PART NO. 10170870. HSN CODE-87089900

Overhauling Rubber Kit for C3W Distributor Valve Consisting of 43 (Forty Three) items as per Annexure-A uploaded herewith..

SUPPORTING PLATE FOR KEO TYPE DISTRIBUTOR VALVE. ESCORTS PART NO. 100 OR KNORR PART NO. KD-10 OR SIMILAR.

ANGLE SEAT VALVE-3/4" DESIGNED FOR PRESSURISED FLUSHING SYSTEM MAKE: SPAC Item Code SPAC.0011042 Accepted make: SPAC.