Valves Tenders in West Bengal

4310 003707 PARTS KIT COMPRESSOR UNLOADER, 5640 72 0000506 WEATHER STRIP, 2520 012677 HOUSING FRICTION CLUTCH, 2520 72 0000552 DRIVEN PLATE FOR CLUTCH, 280943700130 TRAILER CONTROL VALVE, 15710M83F00 INJECTOR ASSY FUEL, 2154 8240 9901 17W HI POWER WIPER MOTOR

Supply delivery Installation and Commissioning of Bulk Electro Magnetic Flow meter, GPRS RTU and Control Valve for Bulk Consumer Water Supply Management at the residential Project ONE TEN at LR RS Dag no.-444/1477,446,447/1472 under Thakdari Mo

MAINT. OF W S NETWORKS BY LEAK REPAIR AIR VALVE REPAIR CUTTING AND FLUSHING DISINFECATION SV CHAMBER CONSTRUCTION ETC AT DIFF. BYE LANES OF R.K UPANIBESH KAMARPARA CENTRAL PARK EAST IN WD NO 102 ,BR XII.

Wire Mesh Fabric or Cloth (V2) as per IS 1568 (Q3), Floor Drain Traps (Q3), Sinks/Wash Basins - Vitreous China as per IS 2556 (Part 4) (Q3), Sluice Valve For Water Works Purposes (50 To 1200 Mm Size) (V2) As Per Is 14846 (Q3) (3 (3 ))

Additional work of pipe laying (MS) and taking out of existing 500 mm dia DI pipe at Vivekananda Road, some MS work on 500 mm dia Primary Grid at Narendra nath Mukherjee Road and installation of sluice valve at Esr of Bally Zone , ward no - 54, Ball

Rubber Spray hose, ID 19mm, Reflective Fluorescent strip Jacket with CIL Logo, Dust Mask, Half Mask Respirator with clear Communication, Flexible Canvas Ducting 24 inches dia, Unslacked Lime, packed in 40Kg, Cast Steel Rising Sluice Valve, Size 4inch, Intrinsically safe and BIS Certified Prestart Audio Visual Alarm

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931 (Q3), Sluice Valve For Water Works Purposes (50 To 1200 Mm Size) (V2) As Per Is 14846 (Q3), Bathroom Water Shower (V2) (Q3), Soap Dish - Case (Q4), Waste Fittings for Washbasin and Sinks as per ... float valve 15mm, ...

Supplying and Laying of 110mm OD HDPE Pipes including Supply of Valves and Specials at Zone-II within Old Malda Municipality for Water Supply Augmentation Scheme Under AMRUT 2.0

Supplying and Laying of 110mm OD HDPE Pipes including Supply of Valves and Specials at Zone-III within Old Malda Municipality for Water Supply Augmentation Scheme Under AMRUT 2.0

Supplying and Laying of 110mm OD HDPE Pipes including Supply of Valves and Specials at Zone-I within Old Malda Municipality for Water Supply Augmentation Scheme Under AMRUT 2.0

Cleaning of H/W site ,railling and stair of GI and valve chamber renovation ,valve changing and repairing ,land development with 1st and 2nd TW site and other allied works at Debshala PWSS,Block-Aushgram-II,Purba Bardhaman.

F-1 Selector valve assly. to WABCO Part No. 557995. Each unit should be emboss /ngraved with makers name, month, year & Batch No Firm's offer: F-1 SELECTOR VALVE ASSLY TO RDSO DRG. NO. SKDP-4154 as pe

F-1 Selector valve assly. to WABCO Part No. 557995.Each unit should be emboss/engraved with makers name, month, year & Batch No FIRM"S OFFER :- F-1 SELECTOR VALVE ASSLY TO RDSO DRG. NO. SKDP-4154, SPE

Pantograph with Throttle Valve (5% extra Throttle Valve as manufacturing spares) for WAP-7/WAP-5 conforming to CLW Specification No. CLW/ES/P-5, Alt-F or latest (TYPE AM-92). Firms offer: AS PER CLW S

OVERHAULING KIT FOR THROTTLE VALVE OF PANTOGRAPH TYPE AM 12 COMPRISING OF 4 ITEM 08 NOS AS PER SKETCH NO BSL/ELW/SK NO.4009 ALT-1 Offer : - KIT FOR THROTTLE VALVE FOR PANTOGRAPH TYPE AM - 12 COMPRISIN

SET OF (i) VALVE STEM (3P) AS PER BHEL'S DRG. NO. 35880530029 P1 & BOSCO DRG. NO. 1062/99 SIZE 9.39 x 66.5 LONG IN POLYURETHANE RUBBER & (ii) VALVE (4P) AS PER BHEL'S DRG. NO. 35880530035 P1 & BOSCO D

Reparing kit (AOH) for rotex make magnet valve model No.3327 as per annexure attached for single bottle VCB (One sets consisting of 9 items ,18 Nos 1. Pt. No.16-valve spring (ventifeeder)-01 Nos. 2. P

SET OF VALVE CLAMP for GD MAKE WATER COOLED AIR COMPRESSOR Model No. WLN9BB, Consisting of 2 items, as following :- a) Valve Clamp LP Suction, Qty = 02 Nos./Kit to GD PT. No. 1WAG185 / EMD PT. No. 80

VALVE GUIDE FOR THROTTLE VALVE ASSEMBLY TO M/S SIL NEW REF NO. S0220132001 OR M/S CPL PART NO. C01940 OR M/S GSEC DRG.NO. GSEC/PANTO/102 FOR AM12/IR01/PAN01 TYPE PANTOGRAPH" . Firm's offer accepted-

High Pressure Discharge Valve Assembly, Spec: EMD Pt. No.-8424969. GD Pt No.-301WLN307 (ITEM 1 to 7). 1) Bumper, GD Pt. No.-2012374, Qty.-1. 2) Spring, GD Pt. No.-301WLN105, Qty.-9. 3) Valve Disc, GD

KIT FOR MAIN VALVE OF C-3 W DISTRIBUTOR VALVE CONSISTING OF 13 ITEMS. ( 1.) DIAPHRAGM HOLDER ITEM NO. 3 WABCO PT. NO. 19004200 SCL PT. NO. 501307000 - 01 NO. (2).'O' RING95.56 X 88.5 X 3.52 ITE

EPG (a) 3way magnet valve ROTEX 3008C -72VDC-28 Rotex Drg.No. 081-10-002-000-C, Recon DRG. No.REC/RV/MV/2022C ACCEPTED : ROTEX MAGNET VALVE MODEL 3008C-10-72VDC-28 DRG NO 081-10-002-000-C

OVERHAULING KIT FOR THROTTLE VALVE OF PANTOGRAPH TYPE AM 12 COMPRISING OF 4 ITEM 08 NOS AS PER SKETCH NO BSL/ELW/SK NO.4009 ALT-1 Firm's accepted offer make: KIT FOR THROTTLE VALVE FOR PANTOGRAPH TYPE

EP Valve for Snubber Circuit complete for SR & FB for WAP7 & WAG-9 (3-phase) Class of Locomotives. Type - EP Valve-R 8-3/2-F-10 B/84 - 110V, Secheron's Part no. - AVE 81110, protect Snubber Circuit -

OVERHAULING KIT FOR THROTTLE VALVE OF PANTOGRAPH TYPE AM 12 COMPRISING OF 4 ITEM 08 NOS AS PER SKETCH NO BSL/ELW/SK NO.4009 ALT-1 Accepted Offer : - KIT FOR THROTTLE VALVE FOR PANTOGRAPH TYPE AM - 12

Drain Valve SS- 1/4'' (inch) BSP for ELGI MAKE 1750 LPM Compressor Model-20100 CG(M) ELGI PART NO: A020045A. Firm's Offered and accepted make : - ELGI (VALVE ASSY DRAIN 1/4"BSP SS303 as per ELGi part

SA-9 Independent Brake valve assembly with handle to WABCO Test Spec No. T-2555-0 and to WABCO Part No. 564141 & 564143 or SA-9 Independent Brake Valve assembly with handle to FTRTIL Part No 503 0010

Reparing kit (AOH) for rotex make magnet valve model No.3327 as per annexure attached for single bottle VCB (One sets consisting of 9 items ,18 Nos 1. Pt. No.16-valve spring (ventifeeder)-01 Nos. 2. P

Electro pneumatic valve to model No.3038C of M/s ROTEX make or similar with the following specification (1) coil voltage : 110V DC. (2) Media: Air. (3) Pressure : 02 to 12 Bar. (4) Valve type: NC 10 V

Valve Assembly, Low Water cut off to DLW Drg No. 8412324 Alt Aa and to DLW Part No.16241216 for HHP Locos. Firm's offer: Valve Assembly Cut-off - Low pressure to Circle Seal (CIRCOR) Part NO. P19-445

SET OF (i) VALVE STEM (3P) AS PER BHEL'S DRG. NO. 35880530029 P1 & BOSCO DRG. NO. 1062/99 SIZE 9.39 x 66.5 LONG IN POLYURETHANE RUBBER & (ii) VALVE (4P) AS PER BHEL'S DRG. NO. 35880530035 P1 & BOSCO D

ONE SET OF SPARE FOR WATER COOLED ELGI MAKE COMPRESSOR, CONSISTING WITH 02 TYPES OF ITEMS. (1) KIT HP SUCTION VALVE, ELGI PART NO. 072410589 QTY: 16 NOS/SET, (2) KIT HP DISCHARGE VALVE ELGI PART NO. 0

ECCENTRIC PROD FOR LIMITING VALVE OF E.P BRAKE UNIT TYPE LD2 to WSF PART.NO.J 72579/1. specn: WEST J72579-1 ACCEPTED-OUR OFFER ECCENTRIC PROD FOR LIMITING VALVE AS PER OUR DRAWING NO 141 00 AND ITEM N

REPAIR KIT FOR AUTO DRAIN VALVE. TO DLW PART NO. 17380273 AND EMD Part No.40029185 Make/brand- MIDLANDS ,Firm offer-Repair kit for auto drain valve RDSO Drg. No. SKDP-4070 Alt Nil or RDSO approved Mid

KIT FOR O/H PRESSURE RELIEF VALVE (COMPRESSOR) CONSISTING OF 03 ITEMS1. SPRING OIL PR. RELIEF EMD PT. NO. 8493863, QTY - 01 NO., 2. GASKET OIL FILTER BODY EMD PT. NO. 9572091 QTY - 01 NO., 3. VALVE PR

REPAIR KIT FOR AUTO DRAIN VALVE TO EMD PT. NO.40029185, SPECN. NO. MP.0.01.0026 REV. 00 MARCH 2010. Firm's Offer:Repair Kit for Auto drain valve. to RDSO Drg. No. SK. DP-4070 alt- Nil or RDSO approved

FOOT OPERATED HORN VALVE TYPE F WSF PT NO J-70742/2. Accepted Description:- FOOT OPERATED HORN VALVE TYPE F WSF PT NO J-70742/2. Or Similar Description and Part No. Should be "Foot Operated Sanding o

Overhauling Kit with Plunger for Rotex Make Magnet Valve to Model No- ULP-SV6V02 for ABD Valve Operation. Specification: Consisting of 05 items: (i) Pt No- 30-Plunger Assly NC-4= 01 No (ii) Pt no-32-G

LIMITING VALVE COMPLETE TO WSF PART NO.C 74800/1, SET AT 3.5 KG/SQ.CM. Firm;s Offer: LIMITING VALVE COMPLETE TO WSF PART NO.C 74800/1, SET AT 3.5 KG/SQ.CM Or Similar Description and Part No.is "Limit

One set of 2 items: 1) Gasket-Valve cover suction unloading- LP to EMD Pt.No.8083598 and GD Part No. 25B19 - Qty - 02 Nos. 2) Gasket-Valve cover suction unloading -HP to EMD Pt.No.40054840 and GD Part

SET OF VALVE CLAMP for GD MAKE WATER COOLED AIR COMPRESSOR Model No. WLN9BB,Consisting of 2 items, as following a)Valve Clamp LP Suction, Qty = 02 Nos./Kit to GD PT. No. 1WAG185 / EMD PT. No. 8057793

COMPLETE COIL ASSLY. FOR ELECTRO VALVE ASSLY., TYPE:NC-4 FOR EPC and REVERSOR OF ELECTRIC LOCO AS PER CLW DRG. NO. 4TWD.111.118 ALT-14 OF EP VALVE WITH PART DRG.NO. 4TWD.111.118 ALT-1,Sheet No.5,6 &

Kit of spares for M/s ELGI make compressor type TRC1000MN consisting of 05 items 01 no. each as follows: As Spec/Drg No- 1) Breather valve-ELGI Part No. A020030, 2) Drain valve,-ELGI Part No. A020045

Solenoid Valve (5/2 Spool Valve Type) with fittings consisting of two items. i) 1/4" x 8mm Elbow = 3 Nos., ii) 1/4 " Exhaust Filter = 2 Nos., Power Supply Input 110V DC, with pneumatic pressure 10 Bar

Additional work for laying 90 mm Dia parallal line including installation of valve ,construction of valve chamber ,road restoration and allied works within Zone-VII Part-C within Malbahal OHR distribution Zone under RCFA Division -I PHE Dte.

Custom Bid for Services - Service SC VALVE SALVAGING, Custom Bid for Services - Service SC CAPS SALVAGING, Custom Bid for Services - Service COLD REPAIR CYL14219, Custom Bid for Services - Service OT HOUR SEMI SKILLED

M9463200025, M9434000005, M9434000010, M9433226029, M9433224023

Custom Bid for Services - Reconditioning/Servicing of different types and sizes of valves for TG AUX & PWS area of DVC, RTPS (2X600MW) Similar Category Operation and Maintenance Power House/Power Plant

SERVICING AND REPAIRING OF 01 NO. OLD AND UNSERVICABLE MOOG MAKE PROPORTIONAL VALVE MODEL NO. D661-40 (Q3), SERVICING AND REPAIRING OF 01 NO. OLD AND UNSERVICABLE MOOG MAKE PROPORTIONAL VALVE MODEL NO. D664-470 (Q3)

Steel Tubes, Tubulars and Other Steel Fittings as per IS 1239 (Part 2 - Steel Pipe Fittings) (Q3), Commercial PPR Pipes Fittings as per IS 15801 (Q4), Copper Alloy Gate Valve for Waterworks Purpose as per IS 778 (Q3) (3 (3 ))