Valves Tenders in West Bengal

PROCUREMENT OF MANUALLY OPERATED RISING TYPE SLUICE VALVE FOR RAW WATER INTAKE PUMPS OF UNIT#8/DPPS.

Supply of Different Dia Sluice Valve at DMC Store Department for Water Supply Maintenance work,Under DMC.

SUPPLYING AND INSTALLATION OF DIFFERENT DIA SLUICE VALVE AT JAMURIA, RANIGANJ, ASANSOL KULTI WITHIN ASANSOL MUNICIPAL CORPORATION

Emergency reaping of sluice valve chamber and allied work Bartoria Neamatpur under RCFA Division-I PHE Dte.

Wey Knife Gate Valve MGA DN 450 with bevel gear for valve station of cross over lines (Q3)

Additional works of Dismantling Relaying of G.I. pipe, Supplying non return valve and other allied works at Damalia under Amritnagar (Zone-II) W/S Scheme under RCFA Division-I PHE Dte.

Non return valve 1/4" Medium : Compressed air, working pressure range : 0.4-10 bar, Ambient/ medium temperature: 5-60 degree clesius, Material of construction : Brass , nitrile, aceta, NW mm : 7, Flow

1-1/4" Non Return Valve assembly type 86R (Teflon seated) to ELW/BSL's Drg. No. ELW/BSL/1/WAM-4/F74.094, (Ref. No. 1 to 10), Alt-Nil or latest.

1-1/4" Non Return valve assly.type 86R (Teflon seated) to drg. no.ELW/BSL/1/WAM-4/F74.094 Ref. no. 1 to 10. '' Accepted offer: Firm's Drg. NO. REC/T-4033.

1-1/4" Non Return Valve assembly type 86R (Teflon seated) to ELW/BSL's Drg. No. ELW/BSL/1/WAM-4/F74.094, (Ref. No. 1 to 10), Alt-Nil or latest.

NON RETURN VALVE TYPE 86 R TEFLON SEAT TO CLW DRG NO 0/3/65/363 ALT 2. Firms Offer : AS PER RECON DRG NO. "REC/T-4003/B ALT-1.

Repair kit for duplex check valve to RDSO drawing No. SKDP - 1187, Alt. - 2, Consisting of 06 items in one set: - (1) Check valve, item no. - 15B, Qty - 1 number, (2) Spring item no. - 17, Qty - 1 num

Supplying aligning, Laying of PVC pipe, HDPE pipe sluice valve, Sluice valve chamber and other allied works at Oriapara, Chapui Vaskadaora 7 nos pit to Rangadanga Talbagan under Ratibati Gram Panchayet under RCFA Part-II W/S Scheme under RCFA Divisi

Swagelok PART NUMBER: SS-42GS4 40G Series Ball Valve, 2 Way, SS316 Body - Specification Uploaded, Swagelok PART NUMBER: SS-1RS4 1 Series Integral-Bonnet Needle Valve, SS316 Body-Spec. Uploaded, Swagelok PART NUMBER: SS-43GS6 40G Series Ball Valve, 2 ... Needle Valve , ... Series Ball Valve , ...

Materails only for 25 mm bore gate valve gun metal, Materails only for 20 mm bore gate valve gun metal, Materails only for 25 mm diaBall valves high pressure of PTMT, Materails only for 20 mm diaBall valves high pressure of PTMT, Ganti Pickaxe With handle not less than 2Kg with smooth handle 3mtr, Manning and operation at various PROVIDING SERVICES FOR THE RUNNING, MAINT AND OPERATION OF WATER AND FIRE FIGHTING AC PLANT, Pick Axe as per IS 273 (Q4)

Procurement of LVDT for Turbine Control Valves and HAG Power Cylinder for Stg I under CI1 Dept. at SgTPP

Supply, Fitment and Commissioning of Integrated test bench for Air suspension control equipment levelling valve & Duplex check valve as per specification attached.

CHECK VALVE ASSEMBLY CONFORMING TO RDSO DRG. NO. WD-83062-S-03, ALT-3 OR LATEST AND TO STR NO. 02-ABR-02, APPENDIX- I ,WITH AMENDMENT NO. 4 OF SEPT 2016 OR LATEST. Accepted description:- CHECK VALVE A

Air control valve assy, Bonnet lock clip, Fuel filter plate and Bracket assy, Roof light assy, seat arm rest, Door tower bolt, Wiper wheel box, Alternator assy 24v, Passenger fan, Air filter, Fuel pump assy, Gear lever kit, QPSV Kit

Custom Bid for Services - Deputation of Service Engineer for technical-supervision of servicing of control Valves, Make: Emerson Process Management- Fisher Valves Similar Category Operation And Maintenance Of Other Machines And Plants

Control Valve Overhauling/Servicing in various units of Haldia Refinery for 2023 Shut down

Control Valve and its Spares - for OMIPL 1x90MW KHGP+ OSPPL 1X90MW JAMURIA Projects (Q3)

Rectification of Rexa make Pressure Control Valve Actuator at HMRBPL, Rajbandh in West Bengal.

Kit, Sander Control Valve to EMD Pt.No.40029184, DLW Pt.No.17455455. Accepted Make:- RECON

9040M26A54 Procurement of Spares for Control Valve of Flowserve Make for SRU-IV Unit

Procurement of spare parts of Gate valve and spare parts of Telescopic sludge valve for water package,DSTPS, DVC

WEY KNIFE GATE VALVE BODY MF(C) DN 450 BODY WITH CENTRE FLANGE CAST IRON (Q3), Complete Assembly of Wey Knife Gate Valve MGC DN 450 (With pneumatic cylinder) (Q3)

Procurement of Fire Monitor with Isolating Gate valve under F and S Dept.,STPS

Procurement of different sizes of Knife Gate Valve for running maintenance under AHM-KTPS

Supply and fitment of Cast Iron Gate Valve of High Pressure coach watering system

1 1/4 inch Non-Return valve assembly as per S.C. Rly.Drawing No. A2/EL/Conv/2666. NOTE : Firms may give a separate additional quote incase latest specification/design amendment is issue

Brass piston for 1 1/4 inch Non return valve (Escort type) along with Viton rubber gasket as per S.C. Railway Drawing No.A2/EL/CONV/2666 Ref. Nos.4,5,6,7,9 &10 ACCEPTED MAKE:RECON

Damper piston complete for 1 1/4" non return valve type-86R, to ref nos. 2, 3, 6, & 7 of Recon drg no. REC/T-4003 and pamphlet no.A-107." Make Brand:RECON

Damper piston complete for 1 1/4" non return valve type-86R as per drawing No. REC/T-4003 Ref. Nos.2, 3, 6,& 7 Alt-1 or latest.. ACCEPTED MAKE: RECON

"CUTTING GAS SET COMPLETE : Supplying of gas cutting of following items (1) flash back arrestor oxygen, qty- 02 Nos (2) flash back arrestoracetylene qty- 02 Nos ( Flame arrestor with non return valve

1-1/4"NON RETURN VALVE ,TYPE 86R AS PER CLW DRG. NO. 0/3/65/363 ALT.2. SUITABLE FOR ELECTRIC LOCOS, CONFORMING TO RDSO SMI-184 DT.30.01.1997. Make:- EIW

1 1/4 inch Non-Return valve assembly as per S.C. Rly. Drawing No. A2/EL/Conv/2666. Accepted offer: Same as tender discription AS PER RECON DRG NO.REC/T/4003/B.

Supply of different dia sluice valve and CI Jeffy coupling for different PWSS under Alipurduar Division, PHE Dte.

Copper Alloy Gate Valve for Waterworks Purpose as per IS 778 (Q3), Water Fittings - Copper Alloy Float Valves (Horizontal Plunger Type) as per IS: 1703 (Q4), Cast Copper Alloy Screw Down Bib Taps and Stop Valves for Water Services as per IS 781 (Q3)

Copper Alloy Gate Valve for Waterworks Purpose as per IS 778 (Q3), Cast Copper Alloy Screw Down Bib Taps and Stop Valves for Water Services as per IS 781 (Q3), Water Fittings - Copper Alloy Float Valves (Horizontal Plunger Type) as per IS: 1703 (Q4)

Duplex check valve 3/4" to CLW Drg No. 0/3/65/103 Alt-2. Make: Recon

3/4 INCH. DUPLEX CHECK VALVE TO CLW DRG NO.03/65/103 ALT-NIL OR LATEST

1/2 INCH SOFT SEATED CHECK VALVE to WSF's Pt.No.A83288/4 Pamp.No.AI-221 or SIMILAR Make MKI

Check Valve 1/2" complete as per CLW drawing No.0/4/65/69. ACCEPTED MAKE: RECON

1" check valve to WSF's Pt.No.IC 70032/2,Pamp.No.AI-221 Supl-1 or similar for Electric locos.

3/4" Duplex check valve set at 5 kg to WSF's Pt.No.IC70024/1 (Pamp.No.AI-205) OR SIMILAR..

3/4 INCH. DUPLEX CHECK VALVE TO CLW DRG NO.03/65/103 ALT-NIL OR LATEST

20 MM GM GATE VALVE, IS 778 CLASS 1, 65 NB MANUAL OPERATED PLUG VALVE, BODY MATERIAL ASTM, 15 MM GM GATE VALVE, IS 778 CLASS 1, 250 NB CAST STEEL SWING CHECK VALVE COMPLYING TO BS 1868, 100 NB, CHECK VALVE SWING, 150 CLASS, BS 1868, GLOBE VALVE, CAST ... GLOBE VALVE , ... GLOBE VALVE , ... NB, GATE VALVE , ... Steel Gate Valve complying ...

Materails only for 25 mm bore gate valve gun metal, Materails only for 20 mm bore gate valve gun metal, Materails only for 25 mm diaBall valves high pressure of PTMT with epoxy coated, Materails only for 20 mm diaBall valves high pressure of PTMT with epoxy coated, Ganti Pickaxe With handle not less than 2Kg with smooth handle 3mtr, Manning and operation at various PROVIDING SERVICES FOR THE RUNNING MAINT AND OPERATION OF VARIOUS WATER SUPPLY INSTALLATION, Pick Axe as per IS 273 (Q4)

(1) Repairing of Hyd. Traction Motors (RH n LH)-02 Nos., Service Control Valve 01 No. (2) Repairing of Hyd. Traction Motors (LH) 01 No Gearbox Assy. 02 Nos. Service Control Valve 01 No