Valves Tenders in West Bengal

Bracket for Distributor Valve as per RDSO's Drg No.WD-80007-S-16,item No.-3, Alt No-11.

Spring Valve Stainless Steel to EMD Part No. 9098117. Firm's accepted offer:GD Part No - 301WLN105,make:GARDNER DENVER USA

MU-2B VALVE OF ELECTRIC LOCO AS PER WABCO PC NO. 564144 AND TEST SPEC. NO. T2655-0.

THROTTLE VALVE ASSLY TO SIL DRG.NO.S-000351. OR CPL DRG.C01900 OR GSEC DRG. NO.GSEC/PANTO/219 ALT-1

Kit of spares for isolating valve switch ( M/s WSF make) Consisting 5 Items as per enclosed annexure.

J-1 Safety Valve PL No: 11390037 , Spec: MP.0.01.00.14, Rev. 01, March 2021 , Drawing: SK-DP 3580.

Set of Check and Shuttle Valve , Make - PARKER (One set consisting of 08 items) as per Annexure - A.

DUST SHIELD OF DISTRIBUTOR VALVE as per LLH's Drg. No. LLH-21/2023, (50% red and 50% yellow).

C3W Distributor valve(Loco) without support reservoir, isolating cock with filter to WABCO Pt. NO. 1903971308 or similar.

PROTECTION COVER FOR DUMP VALVE OF LHB COACHES AS PER DRG NO.AB/04/865 Firm offered make: OWN

LIMITING VALVE COMPLETE TO WSF PART NO.C 74800/1, SET AT 3.5 KG/SQ.CM. Firm's offer: WSF make

half inch Safety valve T2 type complete Specification- CLW Drg.no.- 0/3/65/63 Alt.2 or latest

POH KIT FOR ISOLATING VALVE SWITCH OF M/S.WSF CONSISTING OF 5 ITEMS/9 NOS AS PER ENCLOSURE.

PLUNGER ASSLY FOR MAGNET VALVE OF ROTEX SR 3008 OR 3055 ROTEX DRG.NO.081-10-002-000/1.

SEAL O RING LOW WATER CUT OFF VALVE FLANGE MOUNTING EMD PT NO: 8342588, DLW PT NO: 16171214

O/H RUBBER KIT OF 32 ITEMS FOR C3W DISTRIBUTOR VALVE as per annexure or similar. Make: AK

VALVE DISC OUTER [LP DISCHARGES AND SUCTION] DLW PT No.17380133& EMD Drg .8083590 GD PT NO. 90V26

VALVE OUTER DISC AIR COMPRESSOR,GD PART NO:90 V26, EMD PART NO:8083590. Make/Brand:GARDNER DENVER USA.

NC-4 type Magnet Valve (Electro Pneumatic) used in Locos,Specification-CLW Drg.no. 2 TWD.111.118 Alt.5

3 way Magnet Valve Complete to M/s Rotex Type SR - 3038 NW10. Or its equivalent. Make: RECON

HOSE ASSLY.( LO. RELIEF VALVE TO CYL BLOCK ) as per Drg.No. 40C77778 ALT a specn: MATL.SPEC.AS PER DRG.

N-1 REDUCING VALVE RDSO SPEC.MP 0.01.00.15 REV.00 MARCH 2004 DRG. NO.RDSO SK DP-3582 ALT NIL

MAINTENANCE RUBBER KIT FOR D1 EMERGENCY VALVE CONSISTING OF 5 ITEMS, 5 NOS. AS PER ANNEXURE. Make;- AK

AUTOMATIC DRAIN VALVE [GM TYPE] DRG. NO. DLW PART NO. 17390059 GM DRG. PART NO. 8451213 REV. ''D''

PROTECTION PLATE FOR LEVELLING VALVE FOR LHB COACHES TO DRG. NO. AAA35139 ALT-a, ITEM-1. Make-Self

VALVE ASSLY LP SUCTION UNLOADING FOR WDG4 LOCOMOTIVE TO GD PT. NO. 300WLN306. Make/Brand: GARDNER DENVER USA

Valve Assembly High pressure suction unloading to GD Part No.301WLN306 Firm's Offer : Make/Brand : GARDNER DENVER USA

VALVE BALLCOCK 1- 1/4PT COMPRESSION DRAIN DRG NO EMD PT. NO. 10635443 REV NIL. (HHP) Make-SELF

Safety clamp for C2W Relay valve as per RDSO SKETCH No. SKEL-4544,Alt-0. Accepted make - OWN

Valve assembly oil pressure relief air compressor to GD Part.No.202WBO534 Firm's Offer : Make/Brand : GARDNER DENVER USA

3 WAY VALVE MG4/5A to M/S.REPL Part No.A4150.30 or to RDSO DRG.NO.SKEL 4639. ALTERATION-1 Make:IEI

REPAIR KIT FOR 2/2 WAY NORMALLY CLOSED MAGNET VALVE (TYPE MV-4) MODEL 3278 COMPRISING 09 ITEMS

Valve inner disc L.P. of air compressor for GM locomotive to EMD Pt. No. 8063274. Make/Brand: MDEW

NC-4 type Magnet Valve (Electro Pneumatic) used in Locos,Specification-CLW Drg.no. 2 TWD.111.118 Alt.5

LEVER LOCKING ARRANGEMENT FOR ISOLATING COCK OF BRAKE VALVE OF VESDA SYSTEM AS PER RCF DRG NO MI008044.

Valve assembly LP discharge to EMD Pt.No.8424968 and GD Part No.300WLN307 Make/Brand: GARDNER DENVER USA.

Gland for 100 MM lubricated taper plug valve to RDSO'S Drg no. WD-93066-S-09, Alt.-2

Air vent vacuum valve (Brass body size 15 mm), to Drg. No-LW63150 alt-e item No-3.

VALVE-TEMPERATURE CONTROL DLW. DRG.No.8427032 Alt."Jb" (DLW Pt.No.16241228) SPEC Firm's accepted offer make: TOPGRIP only.

LEVER OPERATED HORN VALVE (SWITCH ) COMPLETE AS PER DRG. NO. WR-CCG-EL/4-AE-053 ALT 1.

PUSH TYPE FLUSHING VALVE TO DRG. NO. ICF/SK-6-3-425, COL.-II, ALT NO. - m/7.

Valve case complete for pneumatic Riveting Hammer suitable for CP pneumatic riveting machines, Make : CP, CHL or equivalent

Diaphragm for (C2W valve) RDSO DRG. NO:- SK.DP.3053, ALT.(1). IRS SPEC. No. R. 48 - 21 (June)

VALVE SEAT (Big), for Shock Absorber Type TV68X48/110a-5 Part / Drawing No.:- Escorts- 4.352.06.21 Sanrok- SE. 4

N-1 REDUCING VALVE ASSEMBLY TO SIL's DRG.NO 30101501 & WABCO's PART NO.552238 OR SIMILAR FOR ELECTRIC LOCOS.

VALVE ASSEMBLY RELIEF, LUBE OIL MANIFOLD, DLW PART NO. 16240613, EMD PART. NO. 8292205. Accepted Make/Brand: RE.

PUSH TYPE FLUSHING VALVE TO DRG. NO. ICF/SK-6-3-425, COL.-II, ALT NO. - m/7.

Magnet Valve Assly (Indigenous) For VCB Type 22CB to M/s Rotex Automation Ltd. Model/Type No.3486.

Push Type Flushing Valve to Drg. No. ICF/SK-6-3-425 Col-II, Alt. No.-m/7.

kit of spares for isolating valve switch (M/S. WSF make) Consisting of 05 items as per enclosed.