Loading
Loading…
Loading…
15,825 results • Best match
" 100 mm Lubricated Taper plug Valve assembly." Drawing No: WD-93066-S-01,alt-2. Material Spec: WD-06-TPV-93, Rev-01
Gasket copper low pressure valve for GD make water cooled air compressor model No.WLNA9BB to GD Pt. No. 25L7/EMD Pt. No.8083592.
C-2W RELAY VALVE ASSLY WITH 6 MM CHOKE. DRG. NO. WABCO PART NO: 579991 SIL PART NO. 30301723 SWIL PART NO. 505001300.
VALVE ASSEMBLY Breather discharge to EMD Part No. 9519501/GD Part no 201WBO307 and to DLW part no 17480127 for WDP4/WDG4 Locos
SET OF MAINTENANCE KIT FOR ROTEX MAKE IP MAGNET VALVE 3403 AS PER ANNEXURE ATTACHED Firm offer same as above, Make / Brand-Progressive
PUSH TYPE FLUSHING VALVE TO DRG. NO. ICF/SK-6-3-425, COL.-II, ALT NO. - m/7 (Small-M). ACCEPTED MAKE -UEE
OVERHAULING KIT FOR LEVELING VALVE CONSISTS OF 12 ITEMS OF M/S APEE ENGINEERS MAKE AS PER LIST ATTACHED ACCEPTED AS PER TENDER
PUSH TYPE FLUSHING VALVE TO DRG. NO. ICF/SK-6-3-425, COL.-II, ALT NO. - m/7 . Firm's Offer : Make/Brand - GP
SOLENOID VALVE,NC type,14 bar (PART NO. 211.11.016.50) for kirloskar make screw compressor Model no.- KES 90, Capacity- 500CFM. Accepted Make: INCOM
Push Type Flushing Valve to ICF Drawing No ICF/SK-6-3-425, Alt-m/7, col II Firm's Offer: Make/Brand:OWN MAKE.
MAINTAINANCE RUBBER KIT FOR N-1 REDUCING VALVE, CONSISING 5 ITEMS, CONFORMING TO IRS-R48-88, As per Annexure-"A". Accepted Make:- Recon
DOME VALVE FOR WESMAN WPT-1 AND WPT-2 PNEUMATIC TRANSPORTER. ( WESMAN PART No: 1-130-03-01-3-01-00 ) MAKE : WESMAN
HOSE ASSLY.. THERMOSTATIC VALVE HIGH PRESSURE LINE (DLW PT. NO. 16360140) DRAWING NO. EMD PT. NO. 9575346, DLW DRG. NO. 9575346 ALT Ab
3/4 inch Safety Valve set at 10.5 kg /sq.cm Specification :- CLW Specn.no.- 0/3/65/93 with latest Alt. Make/Brand-RECON.
Suction Valve Assly. High Pressure for GD make Water Cooled Air Compressor Model No. WLNA9BB,to GD PT.No. 202VEG306A / EMD PT. No. 9319946
Description : "Shim for 100 mm lubricated taper plug valve" RDSO Drawing No : WD-93066-S-05, Alt-01. Material Spec : As per Drawing..
3/4" J-1 SAFETY VALVE pressure setting -10 Kg/cm2TO RDSO.DRG.NO.SK.DP3580,SPECIFICATION NO. MP.0.01.00.14 (REV- 01), WABCO.PT.N0.558296 AND FAIVELEY PART.NO. 522001000.
HOSE ASSLY. THERMOSTATIC VALVE HIGH PRESSURE LINE TO DLW PT NO 16360140 TO DLW DRG. NO 9575346 Alt- Ab DRG. 9575346 Alt- Ab
Cover for LP Discharge Valve to GD Part No.1WAG11 for GD Make Water Cooled Compressor Model WLNA9BB. FIRM'S OFFER: GARDNER DENVER USA
POH kit for triple valve of WSF consisting of 15 items / 23 Nos. per set as per annexure . (MAKE: M/s.WSF or equivalent)
IOH KIT FOR ROTEX MAKE COMPRESSOR LOADING / UNLOADING VALVE MODEL NO. 3294-1.6-3G CONSISTING OF 12 ITEMS AS PER THE ANNEXURE ENCLOSED
POH KIT FOR FEED VALVE TYPE 'F' OF M/S.WSF CONSISTING OF 12 ITEMS /14 NOS. PER SET AS PER ENCLOSURE. Make: WSF
Magnet Valve SR 30317-10 for Tri-plate panel mounted IRAB-9/IRAB-10 brake system for Electric Locos. Accepted Make/Brand: ROTEX
SUPPLY INSTALLATION AND COMMISSIONING OF TEST BENCH FOR DUMP VALVE AS PER DRG. No. G/SD8-368,369 & 370. TECHNICAL PARAMETER AS PER ANNEXURE.
RUBBER PART KIT FOR A-9 AUTO BRAKE VALVE CONSIST OF 8 ITEM DRG.NO.FTIL PART NO- 790502101 WABCO PART NO-562251 Make - SR
GAUGE & BYPASS VALVE as per Drg.No. 10632529 ALT a specn: SPECIFICATION FOR CLAENING,SURFACE/RUST PREVENTIV, I-MARK AND PACKING CONDITIONS MISC:457
RUBBER PART KIT FOR C-3 W DISTRIBUTOR VALVE CONSISTING 45 ITEMS AS PER ANNEXURE. DRG.NO.NDLA / CX-169 ALT NIL FOR 45 ITEMS
Gland for 100 MM Lubricated Taper Plug Valve to RDSO Drawing No.WD-93066-S-09 Alt 2. Material and Specification as per drawing.
Lever Operating horn valve 3.8" to SWIL Pt. No. 714002000.Or ACME Drg.No.123000 or its equivalent suitable for DEMU DPC 1600 HP.
1.25 inch 32mm Steam Stop Valve with IBRTC, CT, 400 200 5A, 2 inch 50mm Steam Stop Valve with IBRTC, Socket Insulator with Pin Set, Chain Pulley Block 5 Ton Capacity, PT, 500VA, 550V 6V 12V 24V 110V, HT Bolt Nut, 16MMx65MM, Thermal Overload Relay, 0.6 to 1Amp, Telescopic switch, Coil Type Relay Pilot Relay, M Seal Cold cable compound with hardner, DGMS Approved FLP Signalling Bell Complete set with transformer, 550 110 15V, Intrinsically safe, with FLP enclosure, Fixed contact Assy, Spare Coil 525V, Bearing 6006 for gear housing, Sun Pinion, Outgoing terminal with insulator DMC moulded, Segment for cable gripping, Isolator 300Amp, OFF ON, 50Amp, Auxiliary Contactor Unit, DGMS Approved SDL LHD Foot Switch, On delay timer, Rating 110V, 0.1 to 30S
ANNUAL RATE CONTRACT FOR ONLINE SEALING OF HIGH PRESSURE VALVES, PIPES FLANGES, BONNETS, CRACKED WELD JOINTS OF BOILER AND AUX AND TG AND TG AUX SECTION OF UNIT NO.4, DTPS, DVC, DURGAPUR-713207
Laying of D.I distribution Pipeline of Zone IV OHR at Nigha OHR near NH2 By pass Road of Jamuria including supply and fixing of specials and valves in the trenches in proper alignment
Making guarding arrangement round the clock for safe guarding valves, pipe lines and all other Government Properties at Benali Head work site under of RCFA Pt-II, WS Scheme. (w.e.f. 01.11.2022 to 31.10.2023)
Day to day operation including maintenance and minor repairing of pump motor sets and valves at different locations College Part of North Bengal Medical College and Hospital Sushrutanagar in the district of Darjeeling
Procurement of Gland Packing, Bonnet Seal Ring and SW Gasket for OH of HP Valves for U 5 and U 6 Overhauling Jan 26 and Nov-26 under B and A Dept., STPS
WBSO LPG Contract for the job of destacking, shifting, stacking and de-shaping of Cylinders, Pressure Regulators and SC Valves etc at IOCL Cell located at Indian Oil Petronas Pvt. Ltd. IPPL, Haldia.
Balance work for laying and alinging of DI K9 rising main pipe line supplying DI specials valves and allied works under command area of Bistupur piped W/s Scheme under DWSD ,PHE Dte
Laying of Distribution Network for newly proposed Deep Tube Well with DI (K-7) and UPVC Pipes including all DI Specials, valves etc near Malijangal Para in Ward No.-07 within Tamralipta Municipality
Laying and alinging of DI K9 Rising main pipe line supplying of DI Specials and valves and other allied works under Command area of Bistupur piped W/s Scheme under DWSD PHE Dte
Supplying and Laying of 110mm OD HDPE Pipes including supply of valves and specials along with restoration works at Zone-I within English Bazar Municipality for Water Supply Augmentation Scheme under AMRUT 2.0
Making arrangement for daily supply of water to different units of quarter executive hostel recreation center by operating valves, pumps etc at old v n colony under S B Area for 365 days.
Supply and Delivery of different valves, column pipe etc. for maintenance and Repair works of different M.I. Schemes under Raghunathganj (A-I) Sub-Division within Berhampore-II(A-I) Division under Non-Plan.
Carring, stacking of different dia (80 mm to 700 mm dia) C.I./D.I. specials, valves grannual chlorine etc including surface dressing, road base at Searsole Stack yard under RCFA Division-I PHE Dte.
REPAIR REPLACEMENT OF GI PIPE LINE INCL CLEANING REPLACEMENT OF OH WATER TANKS REPAIR TO STAGING AND REPLACEMENT OF FLOAT VALVES ETC WORK AT JALAPAHAR KATAPAHAR AND KURSEONG AREA UNDER AGE I DARJEELING
PANTOGRAPH FOR AC FREIGHT ELECTRIC LOCOMOTIVES (WITH 5% EXTRA THROTTLE VALVES AS MANUFACTURING SPARES) TO SPECN. NO. RDSO/2008/EL/SPEC/0066, REV. '0' AMENDMENT NO.1 DATED 31.12.08 WITH AMENDMENT NO. 2
General Purpose Lead-Acid Batteries (Valve Regulated Types) Conforming To IS 16220 (Part 1) (Q3), Lead Acid Storage Batteries For Motor Vehicles with Light Weight and High Cranking Performance (V2) Conforming to IS 14257 (Q3) (3 (3 ))
General Purpose Lead-Acid Batteries (Valve Regulated Types) Conforming To IS 16220 (Part 1) (Q3), Lead Acid Storage Batteries For Motor Vehicles with Light Weight and High Cranking Performance (V2) Conforming to IS 14257 (Q3) (3 (3 ))
General Purpose Lead-Acid Batteries (Valve Regulated Types) Conforming To IS 16220 (Part 1) (Q3), Lead Acid Storage Batteries For Motor Vehicles with Light Weight and High Cranking Performance (V2) Conforming to IS 14257 (Q3) (3 (3 ))
MCB - Miniature Circuit-Breakers for a.c. operation - IS/IEC 60898 Part 1 (Q2), PVC Bib cock 15 mm, CP Pillar cock 15 mm with wall flange, Internal fittings for LLFC complete, PVC flushing cistern 10 ltrs capacity, Bib cock long body 15 mm, Gate valve ... mm, Gate valve GM ... mm, Gate valve GM ... Fly Valve 150 ... Fly Valve 100 ... mm, Sluice Valve 80 ... Black, Sluice Valve 100 ... spindle, Sluice Valve 150 ...
Supplying and Laying of 200 to 300 mm dia DI (K9) pipe and valves with valve chambers.......restoration of road etc complete with other ancillary works of HMC under AMRUT 2.0.