Valves Tenders in West Bengal

Half Inch RELEASE VALVE COMPLETE TO M/S ESCORTS DRG No 4 A. 16014 /1 OR M/s KBIL part No. 1176533 OR M/s FTRTIL part No. 076001000

PASSENGER EMERGENCY ALARM VALVE TO DRG.NO.RDSO SK-97029, ALT-3, APPENDIX-J OF SPECN.02-ABR-2002, AMENDT.NO.4 OF SEP.'2016. Firm's offered make: OWN MAKE/PSEC BRAND

REPAIR RUBBER KIT FOR A-9 AUTOMATIC BRAKE VALVE CR.SK.No. 1885 (Revised) dt. 25.08.2014 Alongwith All Part Drgs. .& Annexure Attached. i) RDSO.DRG.No.SK.DP. 3056 Alt."1" ii) RDSO.DRG.No.SK.DP. 3044 A

contact drum ( Double Segment) complete for Isolating valve switch for WSF type EP Brake controller type ED- 6 of EMUs. to M/S. WSF Part No. A 70229/6

3/4 inch SAFETY VALVE TYPE- E1 SET AT 10.5 KG/CM(square) B2 AS PER CLW DRG. NO. 0/3/65/93 REF. 1 ALT-3 OR LATEST.

LEVELLING VALVE COMPLETE CONFIRMING TO RDSO SPEC.NO.C-K407, REV.03, AMENDMENT NO.1 OF SEPTEMBER 2018 TO RDSO DRG.NO: SK-K1049, ALT:1 (SAFETY ITEM) Firm's offer: APEE make

HP Cylinder discharge valve cover to GD Part No.1WBG11 for GD Compressor of Model WLNA9BB in HHP Diesel Locomotives. Firm's offer: Same as above. Make/ Brand:GARDNER DENVER USA.

Valve inner disc air compressor to EMD Part No. 8063274/GD Part No 90V3 and to DLW part No. 17380145 for WDP4/WDG4 Locos Make/Brand : GARDNER DENVER USA

3/4 inch SAFETY VALVE TYPE- E1 SET AT 10.5 KG/CM(square) B2 AS PER CLW DRG. NO. 0/3/65/93 REF. 1 ALT-3 OR LATEST.

3.WAY MAGNET VALVE (NORMALY CLOSED)ROTEX SR-3008. as per Drg.No. 11360471 ALT nil specn: MATL.SPECN.SIMILER TO ROTEX DRG.MAKE MODEL SR-3008 & DRG.No. 081-10-002-000-C.

1/2" Pressure limiting valve as per CLW drawing no. CLW NO. 0/3/65/90. CLW drawing no. CLW NO. 0/3/65/90. Alt.-2 or latest.

"VALVE SEAT FOR BTPN WAGON TO RDSO DRAWING NO. WD-86081-S-66, ITEM NO.2, ALT.16. MATERIAL AND SPECIFICATION AS PER DRAWING." Make - Own Make of firm

Spare for Automated Hydraulic bearing extractor machine. Quick release coupling (QRC IA Series) Type: Poppet valve and Locking ball system. Consists of Female and male coupling. Maximum working pressu

MAGNET VALVE MV4 TO ROTEX MODEL-3278C-25/20-6G 110 VOLT DC DRG. 081-13-231-069C OR EQUIVALENT CONFORMING TO CLW SPEC. NO. CLW/ES/M-2

Set of lever locking arrangement for isolating cock of Brake Valve of Vesda system as per drg. no. MI008044, item no. 1 to 6. Firms Offer MAKE/BRAND:- SELF

Rotex Magnet Valve for Parking Brake of 1400 HP & 1600 HP DEMU, Rotex drg No-081-07-231-088 Rev-5 as per Rotex part No:-11Z01008R8001, Make-Rotex

SUPPLY , INSTALLATION AND COMMISSIONING OF COMPUTERISED MICROPROCESSOR CONTROLLED DISTRIBUTOR VALVE TEST BENCH. AS PER MCF/RBL SPECIFICATION NO. MCF/RBL/AMV/COMPUTERISED DV TEST BENCH/2018 AND IT INCL

EMERGENCY APPLICATION VALVE FOR WSF TYPE BRAKE EQUIPMENT FOR EMU/MEMU .Spec/ Drg No. as per KPA Drg no. ER/EL/KPA/VA.2HE.742A. ACCEPTED MAKE/BRAND- OWN

3/4 " safety valve J-1 Specification:- WABCO test specn.no. T2463-0 and Drg.no.- 558296 WABCO Pt.no.- 558296 or similar RDSO spec no. MP.O.01.00.14 (Rev-0.00) Feb 2004

THROTTLE VALVE ASSLY OF PANTOGRAPH TO SIL DRG. NO. S- 000351. OR CPL DRG. C01900 OR GSEC DRG. NO. GSEC/PANTO/219 ALT-1 OR CREPL DRG. NO. 0101170.

3/8" Lever operated Horn valve to WSFs Pt.No.IB70141/2 (AI-217/1) or similar to CLWs Drg.No.0/3/65/95 for WAM4 & WAG5 locos. Firms Offer: SKEE

Triple valve type Fe11450 size 16 inch for EP brake unit of M/s. Escorts type brake equipment for EMU. As per M/s. Escorts Drg.no.1A 68053/A.

SET OF RINGS FOR THROTTLE VALVE IN KIT FORM FOR PANTOGRAPH TYPE AM 12 OR SIMILAR DESIGN AS PER ANNEXURE.(EACH KIT CONSISTS OF 07 ITEMS IN 07 NOS.)

VALVE ASSEMBLY,Cutout to EMD Part No. 10635243 and to DLW Part No. 17451681 for WDP4/WDG4 Locos Firm`s Offer : Same as above. Make / Brand : Self [ Own MAke ].

GASKET DISCHARGE VALVE COVER LP TO GD PART. NO. 225WLN715 FOR GD MAKE WATER COOLED AIR COMPRESSOR (Model No. WLNA9BB) Firms' offer: Same as above, Make/Brand:GARDNER DENVER USA

Foot operated sanding and whistle valve complete for use in BHEL EMUs. Spec/Drg no.ER/KPA/EL/AR.3HE.1802 D,Items 1 To 14.(sheet 1 to 3).

Silicon Valve and Packing as per parameters given below. 1.PARAMETER: APPERENCE REQUIREMENT:WATER WHITE. 2.PARAMETER: TEMPERATURE RANGE REQUIREMENT: -40 DEG. C TO + 260 DEG. C. 3.PARAMETER:WORKED PE

IOH kit for Rotex magnet valve Model No-3327 for single bottle VCB of M/s AAL make having part no-11ZP251600006 as per annexure. Accepted Make/Brand: ROTEX

REPAIR KIT for AUTO DRAIN VALVE to RDSO.DRG.No.SK.DP- 4070 Alt.Nil,(consisting 9 Items:- 3,6,7,12,13,14,15,17,22) OR EMD Pt No. 40029185, Consisting of 09 items as followings :- 1) SEAL 'O' RING-

Stop valve hand wheel for tank wagons to IRS DRG. No. W/TF-2066, Alt-1, & Material Cast Iron conforming to IS: 210-2009, Reaffirmed:2020, Grade: FG.200.

Levelling Valve for FIAT Bogie with Air spring in secondary suspension as per RDSO specification - C-K-407( Rev - 03), Amendment - 1 of Sep' 2018 Firms Offered Make: APEE

Valve Assembly, Gauge and bypass to DLW Drg No. 10632529 alt a and to DLW Part No. 17390310 for HHP Locos Firm's offer: Same as above. Make Brand: HKCO

KIT FOR D2 RELAY VALVE AS PER FTIL PART NUMBER 790018105 AND D & M PART NUMBER RK AB42-W1 CONSISTING OF 10 ITEMS 13 NOs AS PER ANNEXURE ATTACHED.

Coil Assembly for NC4 Electro Valve to CLW's Drg. No. 4TWD.111.118 (Alt.-14) (Sheet-5/Alt.-1) and RDSO's SMI No. - ELRS/SMI/0224/2001 (Rev.-0). MAKE:OWN

LUBRICATED TAPER PLUG VALVE ASSEMBLY- 100mm TO DRG.NO.WD-93066/S-01, ALT 2. SPECN.NO WD-06-TPV-93, REV .1 OF JAN'23 Firm's offer: As above. Make/Brand:AT

LUBRICATED TAPER PLUG VALVE ASSEMBLY-100mm TO DRG.NO.WD-93066/S-01 ALT 2. SPECN.NO WD-06-TPV-93, REV .0, Amendt,NO 1OF DEC.97 Firm's offered make: AT

Leveling valve complete Conforming to RDSO SPEC No.C-K407, Rev-02 , Amendment No.1 of September 2018 and to RDSO Drg No.SK-K1049. Alt-1.ACCEPTED MAKE/BRAND :SAM

THROTTLE VALVE ASSLY FOR PANTO TYPE AM-12 TO SIL PT.NO. S-0220110101 OR CONTRANSYS PT. NO. CO-1900, OR GENERAL STORES PT.NO.GSEC/PANTO/ 219 ALT.1. specn: S000351

Rear contact assembly (Self lapping) for EP brake valve for WSF type EP brake controller type ED-6 of EMUs to M/s. WSF Part No. A 88566/4.

VALVE ASSEMBLY, High pressure discharge to EMO part No. 8424969/GD Part no 301WLN307 and to DLW Part No.17380248 for WDP4/WDG4 locos Make / Brand : GARDNER DENVER,USA

POH kit for EP magnet valve unit of M/S WSF make brake unit (Set consists of 26 hardware items). [ Full Description enclosed Annexure in Documents. ] Accepted Make: WSF

Valve for Discharge system of BPTN wagons to RDSO S Drg. No WD-86081-S- 66, Alt-16, Item 5, Material to IS: 1458-1965, (Reaffirmed 2021) CL-II

Pressure Regulator (without Relief Valve) for LPG, ISI marked with standard click on Adaptor suitable for PSU Cylinder.Matl. & Spec: IS: 6901 / 2018, Equipment Class: 0. Make-WELDSTAR BRAND.ISI MARKED

Front contact assembly ( self lapping ) for EP brake valve for WSF type EP brake Controller type ED-6 of EMUs. to M/s. WSF Part No. A 88566/3.

Contact Spring complete for ICS & D.B. valve to M/s WSF part No.A83929/1 : Ref No 116 OR M/s KBIL part No. A83929/1 Drg. Position No.1.1.

1/2"limiting valve with pipe bracket to CEE's Drg. No.- LOCO/1/AE/198 (Sheet No.-1 &2)(Ref.:-CLW's Drg.No.- 0/3/65/90)for WAG7 locos.

Safety valve 1/2" (with Pressure setting of 8.5 Kg/cm2) as per Eastern Railway drawing No. ER/KPA/EL/PN.2HE.708B for EMU/MEMU application. Make: SME

Pressure Regulator (without Relief Valve) for LPG, ISI marked with standard click on Adaptor suitable for PSU Cylinder. Material & Specification -- IS: 6901 / 2018, Equipment Class: 0. Firms offer Mak

REPAIR RUBBER KIT FOR MU-2B VALVE CR.SK.No. 1891 (Revised) dt. 25.08.2014 Alongwith All Part Drgs. .& Annexure Attached. i) RDSO.DRG.No.SK.DP. 3058 Alt.1 ii) RDSO.DRG.No.SK.DP. 3031/06 Alt.Nil IRS

A-9 AUTO BRAKE VALVE WITH HANDLE TO CLW DRG.NO.0/2/65/243 ALT-1 AND WABCO SPECIFICATION NO.T- 2559-0 AND WABCO CAT NO. 564140 AND 564142.