Advanced Weapons And Equipment India Limited Tender Results

i) DIN 50 ADB SIDE LOCK HOLDER EM34715842063 QTY. 02 ii) CROWN LOC SHANK SD107-18.00/18.99-130-20R7 QTY

CONTACT KIT COMPLETE SET FOR 3 TF-56 FOR SIEMENS (SICOP. SERIES) AIR BREAK POWER CONTACTORS 400 AMP.

i) ADAPTOR, BT40 ER32X100 QTY. 01 ii) COLLET, ER32 SPR7.8AA QTY. 01 iii) S/C DRILL DIA 6.1MM SCD 061.0

4 FLUTES DIN 13 HSS M2 GRADE HAND TAP SET FOR ISO METRIC COARSE THREADS DIA M12. PITCH-1.75MM, OAL-8

COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 DC(I) NO. 26608-SA, DT. 07.02. 12 WITH COVER DS CAT N

Toner Cartridges/Ink Cartridges/Consumablesfor Printers (Q2)

ADA 63-44 or Equivalent Make-GW/ICI/Artek/Salt & Chemical Pvt. Ltd.

A4 Size photocopier paper with customized watermark, 75 GSM I. C: - 1400520058

SPRING TO DRG. NO. 2A26-02-141

GRUB SCREW AS PER DRG. NO. 2A46. STD. PART-4

SPRING TO DRG. NO. 2A20-02-35

BOLT 3M10-8gx25.66C-06 DRG. NO. 2A46M/SK/0018/4

BOLT 3M8-8gx12.66 DRG. NO. 2A46M/SK/0018/1

PIN 4U8X20 DRG. NO. 2A46M/SK/0015/2

FLOOR PLATE FOR TRAIL SPADES TO DRAWING NO. GCF/50/40333

4100400371 U DRILL BODY FOR 30MM DRILLING, L/D-3, THROUGH COOLANT, RH CUTTING, ACCOMMODATE ONE CENTE, 4100400372 CENTER INSERT SUITABLE FOR U DRILL BODY DIA. 30MM WITH CHIP BREAKING GEOMETRY, MIN. CUTTIN, 4100400373 PERIPHERAL INSERT SUITABLE FOR U DRILL BODY DIA. 30MM, WITH CHIP BREAKING GEOMETRY, MIN. C, 4100400374 INSERT SCREW OF INSERT FOR U DRILL BODY DIA. 30MM, 4100400375 KEY/SCREW DRIVER SUITABLE FOR U DRILL BODY DIA 30MM

SET OF DRILL DIA 13MM AS PER ANNEXURE-7 MAKE: KENNAMETAL/SECO/SANDVIK/WALTER/ISCAR/KOMET.

INDEXABLE DRILL BODY DIA25MM WITH WL= 250MM AND SHANK DIA32MM KSEM 250R10WN32M QTY. 02, FLAT BOTTEM D

PIN 2A46-STD-5/4

PIN 2A46-STD-5/2

PIN 2A46-STD-5/3

PIN 2A46-STD-5/5

SLEEVE CONNECTION DIAMETER MACHINE SIDE 20 MM, CONNECTION DIAMETER WORKPIECE SIDE 8 MM, OVER ALL LEN

SOLID CARBIDE DRILL DIA 4.2 MM SHANK DIA 6 MM WORKING LENGTH 63 MM CHIP FLUTE LENGTH 76 MM OVER ALL

SOLID CARBIDE DRILL DIA 5.5 MM SHANK DIA 6 MM WORKING LENGTH 17 MM CHIP FLUTE LENGTH 28 MM OVER ALL

SET OF SUPER DIEMASTER BULL NOSE CUTTER DIA-63MM WITH INSERT RADIUS- 8.00MM, (A) BULL NOSE CUTTER DIA

SET OF EXTERNAL THREADING TOOL HOLDER, INSERTS WITH BUTTRESS THREADS AND PITCH-9.525MM, AS PER CARME

SOLID CARBIDE STEP REAMER DIA 2.4MM X FL 20.0MM X Z 4NO. XDIA 4.1MM X 30.0MM X DIA 5.2MM X 50.0 MM X

1400400212 Solid carbide internal right-hand Whitworth (B. S. 84-1956 DIN2S9) threading insert, full p, 4100401666 INTERNAL RIGHT HAND THREADING BAR, MIN. BORE DIA 29MM WITH BODY REDUCED 25MM, FUN. WIDTH-M, 4100401668 SUITABLE INSERT SCREW FOR RIGHT HAND INTERNAL WITHWORTH (B. S. 84-1956 DIN259) THREADING IN, 4100401669 SUITABLE SHIM FOR RIGHT HAND INTERNAL WITHWORTH (B. S. 84-1956DIN259) THREADING INSERT, MAK, 4100401667 SUITABLE SHIM SCREW FOR RIGHT HAND INTERNAL WITHWORTH (B. S. 84-1956 DIN259) THREADING INSE, 4100401670 SUITABLE KEY FOR RIGHT HAND INTERNAL WITHWORTH (B. S. 84-1956 DIN259) THREADING INSERT

TOOL SET OF FLAT BOTTOM AND BACK DRAFT COPY MILLING CARBIDE NECK LONG CUTTER DIA 10MM

6MM GROOVING INSERT CODE NO. N123K2-0600-0004-GM 4325 (SANDVIK)

SOLID CARBIDE ENDMILL DIA 20MM. F. LENGTH= 40MM (MIN) & OAL= 90MM(MIN) CORNER RADIUS= 0.2MM.

SOLID CARBIDE DRILL 5.0 MM L/D 3 MAKE TAEGUTEC, CERATIZIT, GUHRING, ISCAR/SECO/WALTER

SURFACE ROUGHNESS TESTING EQUIPMENT AS PER ANNEXURE NO. QC(M)/GS-1/SPECIFICATION/SR DT. 30.05. 2020

4100400994 DOUBLE SIDED COATED MILLING INSERT WITH 02 CUTTING EDGES ON EACH FACE INSERT WIDTH 6 MM T, 4100400995 THROUGH COOLANT SUPER HIGH FEED INDEXABLE ENDMILL DIA 16 MM SHANK DIA MIN. 16MM USABLE LE, 4100400997 THROGH COOLANT SUPER HIGH FEED INDEXABLE END MILL DIA. 25 MM SHANK DIA MIN. 20MM USABLE LE

HSS TOOL BIT SIZE 25x25x200 TO IS: 11143-84 MATERIAL: XT110Mo10Co8Cr4W2 OR XT125WCo10CrMo4V3 TO IS: 72

INDEXABLE END MILL CUTTER DIA. 16MM MAKE- CERATIZIT/KYOCERA/ISCAR/SECO/TITEX/SANDVIK/LMT KENNAMETAL/T, INSERT ISCAR NO. APKT 100320-PDTR-RM IC328 R2 OR EQUIVELENT. TO SUIT ISCAR HOLDER NO. E90A-D16 MAKE-SA

Parted Billet for Body Shell 125 MM HE as per Drg. No. SK- 9891 Rev B Other parameter as per OFC Drg.

50KW/KVA GRID INTER-ACTIVE SOLAR INVERTERS SUBSTANTIALLY EQUIVALENT TO EXISTING DELTA MAKE SOLAR INV

PRESSURE SWITCH (PRESSURE SENSOR) ADJUSTABLE PRESSURE 1.5-35 BAR, FLUID CONNECTION G1/4 FEMALE, ELEC

SWITCH DISCONNECTOR FUSE UNIT, FRONT OPERATED 3 POLE 800 Amp. 415V AC 3 PHASE COMPLETE WITH OPERATIN

Custom Bid for Services - VARIOUS TYPE OF GAUGES, SPECIFICATION OF GAUGES AS PER ATTACHED ANNEXURE A OFPKR/QC/RC/GAUGES/2025-26 DATED 22/09/2025 Similar Category Calibration Services

4100400136 ISO Turning Holder For external turning RIGID Clamping System/D-Style Holder Entering An, 4100401415 ISO Turning Insert WNMG080408, Suitable for Rough Turning of steel Alloys upto 50 HRC, T

SET OF THROUGH COOLANT INDEXABLE REAMER DIA. 25 MM NON-ISO. WITH HEAD AND ACCESSORIES (1) . THROUGH COL

SPRING OPERATED CLAMPING CONE PART NO. 1256149/2 (ONE SET CONSIST OF 4 PIECE) MAKE: ROHM GMBH

INSERT FOR MILLING CUTTER DIA 63MM ADMT 180712R- D56 WKP35S MAKE- MAKE: SANDVIK/SECO/WALTER/KOMET/WIDI

ARALDITE TUBE SIZE 180 GRAMS.

HEAD AS PER DRG. NO. 2A20-02-78

Custom Bid for Services - COMPREHENSIVE ANNUAL MAINTENANCE CONTRACT FOR 01 NO MAGTECH X-RAY BAGGAGE SCANNER (RFI REGD NO 13322) DETAILS AS PER ANNEXURE-A Similar Category Repair and Overhauling Service

SUPPLY OF CENTRALISED ANTI VIRUS SYSTEM TO PROTECT ALL THE SYSTEMS CONNECTED IN OFT LAN WITH 3 YEARS