Advanced Weapons And Equipment India Limited Tender Results

Shim as per Drg No. 1015-000260

Collar Shaft as per Drg No. 3040-016132

Bolt as per drg. no. 5306-004090

Bushing Sleeve as per Drg No. 3120-000780

FINISH MACHINING OF BOLT AS PER DRG. NO. 2A26-01-35

FINISH MACHINING OF AXLE AS PER DRG. NO. 2A26-02-139

FINISH MACHINING OF SCREW AS PER DRG. NO. 2A26-02- 159

FINISH MACHINING OF AXLE AS PER DRG. NO. 2A26-02-138

Custom Bid for Services - AMC AND CALIBRATION OF 30 TON WEIGH BRIDGE NO OFC 7003 TERMS AND CONDITIONS AS PER ANNEXURE A SPECIFICATION AMC OF WB OFC 7003 DTD-30/05/2025 Similar Category Comprehensive Annual Maintenance Services for Precision Air Conditioners

FUNCTION GAUGE TO DRG. NO. MP-9001751

PLUG AS PER DRG No. 1015-000547

STEEL SQ. BAR 25 MM( X 500 MM LONG OR MULTIPLES) TO SPECN. IS: -4431-1978. Gd. 40 C 10 S 18 (B) ., ST. RD. 175 MM DIA X 1070MM LENGTH TO SPECN. IS: 5517- 1993, DESIGN. GD 40Ni6Cr4 MO3 (RS-63) ESR/VAR. SULP, STEEL ROUND BAR 90 MM DIA TO SPECN. IS: 5517-1993, GRADE 40 Ni6 Cr4 Mo3 (LRS-63) . SUPPLY CONDITION: - AS, ST. RD. BAR 140MM DIA X 1050 MM LENGTH TO SPECN. IS: 5517- 1993 GD. 40Ni6 Cr4, MO3, LRS- 63) ESR/VAR, SULPHUR, STEEL ROUND BAR 150 MM DIA X 1300 MM OR ITS MULTIPLES IN LENGTH TO SPECN-IS: - 5517- 1993, Gd. 40 NI 6, ST. RD. 110 MM X 1820 MM LENGTH TO SPECN. IS: 4367-1991 40 Ni6 CR 4 Mo3 ESR/VAR. SULPHUR-0.015 PHOSPHOURO, STEEL ROUND BAR TO SIZE 65.00 MM DIA x 1800 MM LENGTH TO SPE CN. NO. IS: -5517-1993, GD. 40 Ni6 Cr4 MO3, (, ST. RD. BAR 56 MM DIA X1150 MM LENGTH TO SPECN. IS: 5517- 1993, GD. 40 Ni6, Cr4, Mo3. LRS-63) MATL. SHOULD BE, STEEL ROUND 90MM DIA STD. LENGTH TO SPECN: IS: 5517-1993 GRADE 40 Ni6 Cr4 Mo3 (RS-63) ., ST. RD. 145MM DIA TO SPCN. IS: 5517-93 DESIG. 40 Ni6 Cr4 Mo3. LRS- 63) LFVD WITH CALCIUM SILICATE TREATMEN, ST. RD. 105MM DIA TO SPECN. IS: 4367-91GD. 40 Ni6 Cr4 MO3 ESR/VAR S= 0.016, P= 0.03 AS PER SPECN, IS: 4163- 82

ARM SEAR CONNECTING (THROUGH MIM ROUTE) FOR PISTOL AUTO 9 MM

MICRO GRAIN SOLID CARBIDE CENTER CUTTING END MILL DIA 16 MM FL 30 TO 35, OAL 85 TO 95, SHANK DIA 16M

HAMMER (THROUGH MIM ROUTE) FOR PISTOL AUTO 9MM

FINISH MACHINING OF EYE BOLT/SCREW AS PER DRG. NO. 2A26-02-155

FINISH MACHINING OF BOLT AS PER DRG. NO. 2A26-01-31

MANUFACTURE & SUPPY OF TRICA BOLT CARRIER BLANK AS PER DRAWING TEND-2692* WITH FIRMS MATERIAL

Custom Bid for Services - ANNUAL MAINTENANCE CONTRACT FOR ELECTRONIC CONTROL WATER PURIFIER SYSTEM AND REVERSE OSMOSIS WATER PURIFIER SYSTEM (SCOPE OF WORK AS PER ANNEXURE) Similar Category ANNUAL MAINTENANCE SERVICES FOR WATER PURIFICATION AND CONDITIONING SYSTEM (Version 2) Water Drilling Service Water Audit Service

Bolt Machine as per drg. no. 5306-004053

AMMUNITION 12.7 MM HIGH PRESSURE CARTRIDGE (HPC) WITH PRESSURE VALUE REQUIREMENT= 4200+ OR- 100KGF/SO.

SIEMENS make

MICRO GRAIN SOLID CARBIDE CENTER CUTTING ENDMILL DIA 20 MM FL 30 TO 35, OAL 95 TO 105, SHANK DIA 20M

REPAIR/SERVICING OF SPINDLE CONTROL CARD, PART NO. A20B-1003-0010, MAKE: FANUC

SAFETY CAP IN FIN COND M/C WITHOUT PAINTING & PASSIVATION TO DRG. NO IAFO-44 PT. NO- IQX-14 DC 35445

BRACKET TO DRG NO. ILG-1516/IWP-1976., BOSS TO DRG NO. ILG-1572/IWP-1992, LEVER CONTROL HAND LARGE TO DS CAT NO. 2520-002425.

SPANNER 57-A TO PART NO. ICM-1962, DS CAT NO. 5120- 004559 (LAST DC NO. 19574-W DT. 09.02. 2017) ., SPANNER 58-A TO PART NO. ICM-1963, DS CAT NO. 5120- 004560, SOCKET SPANNER TO PART NO. ICM-1956, DS CAT NO. 5120-004554, (LAST DC N O. 19574-W, DT. 09.02. 2017) ., SPANNER 62 A TO PART NO. ICM-1967, DS CAT NO. 5120-004564, (LAST DC NO. 19574-W, DT. 09.02. 2017)

Nut as per drg. no. 5310-001555

Stud Saddle as per drg. no. 5307-001295.

STP 66079US OIL TREATMENT (443 ML) USED IN COLD SWAGING MACHINE.

Bush as per drg. no. 1015-002070

POLYPROPYLENE CORRUGATED PACKING BOX DIMNS. OF THE COMPT. : L-241.8 & 80.80 DIA (INSIDE DIMNS. OF THE

SANDVIK/KENNAMETAL/ISCAR/S, INSERT PARTING 3 MM N123 G2 03000-0003-TF 4225 OR EQUIVALENTMAKE- SANDVIK/KENNAMETAL/ISCAR/SECO/TAEGU

COMPLETE TURNING, BORING & THREADING OF EVACUATING CHAMBER AS PER SK DRG NO. 01870(SHEET- 1&2) AFTER WE

Goods Transport Service – Per Trip based Service - TRANSPORTATION OF DEFENCE ITEMS FROM GCF JABALPUR TO RANIPETH CHENNAI THROUGH THREE AND HALF TON TRUCK; Open Body LCV Truck; 13 FT LCV, Goods Transport Service – Per Trip based Service - TRANSPORTATION OF DEFENCE ITEMS FROM RANIPETH CHENNAI TO GCF JABALPUR THROUGH THREE AND HALF TON TRUCK; Open Body LCV Truck; 13 FT LCV, Goods Transport Service – Per Trip based Service - TRANSPORTATION OF DEFENCE ITEMS FROM GCF JABALPUR TO KIRKEE PUNE THROUGH ONE AND HALF TON TRUCK; Open Body LCV Truck; Light Duty, Goods Transport Service – Per Trip based Service - TRANSPORTATION OF DEFENCE ITEMS FROM GCF JABALPUR TO OFPKORBA UTTAR PRADESF THROUGH ONE AND HALF TON TRUCK; Open Body LCV Truck; Light Duty, Goods Transport Service – Per Trip based Service - TRANSPORTATION OF DEFENCE ITEM FROM HVF AVADI TO GCF JABALPUR THROUGH SEVEN AND HALF TON TRUCK; Open Body LCV Truck; 19 FT LCV, Goods Transport Service – Per Trip based Service - TRANSPORTATION OF DEFENCE ITEMS FROM HAZIRA GUJRAT TO GCF JABALPUR THROUGH MAHINDRA PICKUP OR SIMILAR; Pickup Truck; Medium Duty, Goods Transport Service – Per Trip based Service - TRANSPORTATION OF DEFENCE ITEMS FROM GCF JABALPUR TO HAZIRA GUJRAT THROUGH MINI TRUCK OR LOADING PICKUP; Pickup Truck; Medium Duty

DOUBLE SIDED RECTANGULAR INSERTS

TURNING TOOL HOLDER PCLNL2525M16 COMPLETE WITH ASSEMBLY PARTS AND EXTRA 04 SET OF SPARES., TURNING TOOL HOLDER PCLNL3232P16 COMPLETE WITH ASSEMBLY PARTS AND EXTRA 04 SET OF SPARES., TURNING TOOL HOLDER DVJNL2525M16 COMPLETE WITH ASSEMBLY PARTS AND EXTRA 04 SET OF SPARES., TURNING TOOL HOLDER PSSNL2525M12 COMPLETE WITH ASSEMBLY PARTS AND EXTRA 04 SET OF SPARES.

TOOL SET CONSISTS OF TOOL HOLDER

Oil servo system-46 of IOCL or equivalent grade Oil of BPCL/HPCL.

FINISH MACHINING OF LOCK AS PER DRG. NO. 2A26-02-161

Storage shelving unit as per MCO Annexure- no-MCO/1278

FINISH MACHINING OF ROD AS PER DRG. NO. 2A26-02-156

A-TOOL SET 6MM GROOVETURN

FINISH MACHINING OF STOP AS PER DRG. NO. 2A26-02-153

Copper Band Blank (10.4 MM) for Shell 125 MM HE 1A as per Drg. No. SK-10086 Rev. A

HOLDER SHANK HEIGHT 25 MM, S ( 1 the number ten for arbitrary powers ), INSERT WIDTH 3.0 MM, CORN ( 120 the number ten for arbitrary powers ), PROFILE ( 90 the number ten for arbitrary powers )

GAS ARGON COMMERCIAL GRADE HAVING PURITY 99.995% TO IS-5760/1966.

ROTARY UNION, DEUBLIN MAKE MODEL NO DBRU-903-120- 188 OR MICRO ENGINEERS MAKE MODEL NO 555-01-12 OR

ROTARY ENCODER EQN 1325 X 2048 ID NO. 823901-52

Copper Band Blank (5.9 mm) for Shell 125 MM HE 1A as per Drg. No. SK-10085 Rev. ‘ A’