Advanced Weapons And Equipment India Limited Tender Results

INDEXABLE SLITTING CUTTER CARRYING SELF GRIP INSERT, ISCAR CODE NO. SGSF 50-2-8KR CONSISTING OF (1) DR, SPECIAL SELF-GRIP INSERT W 2.5 MM WITH R1 RADIUS ISCAR CODE NO. GSFN 2.5 R1 IC-908 NOTE-ITEM NO. 1&2

TOOL SET CONSISTS OF SPECIAL EXPANDABLE SOLID MONOMAX PILOT REAMER DIA 30H7 FOR T90 BR RING AS PER

ORDINARY PLAIN GLASS SHEET SIZE- 6’ X 4’ X 3 MM THICK

COURSE SAND OF KALPI PASSED THROUGH B. S. 14 TO 16 MESH.

4100401634 DOVETAIL CLAMPING STRUCTURE TYPE HEAD EXCHANGABLE DRILL BODY WITH FRONTAL TWISTED COOLA, 4100401635 WEAR RESISTENCE INDEXIBLE SELF CENTERING DRILL CARBIDE HEAD WITH DOUBLE MARGIN, PONT

INVESTMENT CASTING TO DRG NO. 64C 5014 250 I3 REQUIRED FOR CARRIER (C5014)

BOLT, CENTERING AS PER DRG. NO. 020054A-00 FOR ELEVATION ASSY OF SRCG

SAFETY SELECTOR AS PER DRG NO. 36P 1012* 2 (WITH FIRM'S MATERIAL)

PIN FOR RETAINER & SIGHT RAIL AS PER DRG NO. 36P 1031*

PIN, BARREL UNLOCKING LEVER AS PER DRG. NO. 36P 1006

LUGGED CARBIDE T-SLOT CUTTER DIA 19.7MM, PARALLEL SHANK DIA10 MM, AS PER DRG. NO. SKM-998. MAKE-PRECI

PARALLEL POLE MAGNETIC CHUCK WITH MANUAL ACTUATION, CLAMPING FORCE 80 N/CM2 FOR GRINDING OPERATIONS S

COPPER BAND BLANK (5.9MM) FOR SHELL 125MMM HE1A AS PER DRG NO. SK-10085 REV-A

COPPER BAND BLANK (10.4MM) FOR SHELL 125MMM HE1A AS PER DRG NO. SK-10086 REV-A

SUPPLY, INSTALLATION & COMMISSIONING OF E POWER SCR THYRISTOR (250A), PART CODE: E POWER/3PH250A/690

CONTROL UNIT KEH 01 380V-400V/50-HZ OF SCHUNK BED SIZE-1000X800 MM INCLUSIVE OF HAND REMOTE & CABLES

SILVER COATED INSERT FOR DIA 63MM AS PER ANNEXURE 19 MAKE: SECO/SANDVIK/WALTER/KOMET/ISCAR/DIJET.

ITEM DESCRIPTION: SET OF MILLINGCUTTER (AS PER ANNEXURE ENCIOSED) ) MAKE- SCO/SANDVIK/WALTER/KOMET/I

COMBIMASTER HIGH FEED MILLING CUTTER DIA 20MM(OAL- 28MM, SH DIA -M10MM) (AS PER ANNEXURE A) ) MAKE

DIA- 3.0MM S. C CENTER CUT END MILL WITH ER25 COLLET CHUCK SK50 AS PER ANNEXURE-41. MAKE: SANDVIK/SECO

VERTICAL IMMERSIBLE PUMP, MODEL: MTS 20-40 R38 DQ-T, FLOW: 23.2LPM, RPM: 2900, MOTOR POWER: 3KW, PRE

VERTICAL IMMERSIBLE PUMP, MODEL: MTS 20-80 R38 DQ-T, FLOW: 23.2LPM, RPM: 2900, MOTOR POWER: 5.5KW, P

TOOL SET CONSISTS OF SPECIAL SOLID MONOMAX REAMER DIA 29.8MMAS PER KOMET CODE OR EQ. 1-REAMER, DIA 2

SET OF SC HEAD T-SLOT CUTTER DIA 32 X 6 MM WITH STEEL SHANK AND ADJUSTABLE TORQUE HANDLE (TORX, 5 T

SUMOCHAM 12xD DRILL FOR EXCHANGEABLE HEADS DIA 15.00 TO 15.99MM, WL-182.27MM, OAL-253.73MM, CYLINDRICAL

DYNAMIC MILLING SC ENDMILL DIA-16MM, FL-48MM, OAL- 110MM, CR-1MM, NO. OF FLUTES-5, SD-16MM, HELIX ANGLE-4

NECK TYPE SOLID CARBIDE END MILL DIA 16MM, NECK DIA- 15.04MM, NECK LENGTH-48MM, MAX. DOC-32MM, OAL- 100M

SPECIAL SOLID CARBIDE LONG DRILL DIA 4.1MM, L/D-16, SHANK DIA- 6 MM, FLUTE LENGTH - 70 MM

TOOL SET OF INDEXABLE ENDMILL DIA 20MM AS PER ANNEXURE ENCLOSED. ANNEX. NO. - MCO/07020

TOOL SET OF 6MM FACE GROOVING

TOOL SET OF EXTENDED NECK SC BALL NOSE DIA-4MM 1- STRAIGHT SHANK ER16 ADAPTOR, SD-20MM, OAL-181.5MM

LUBRICATION OIL ISO-VG-150 VISCOSITY 150 CST/40 DEGREE C. (ENERGOL GRXP-150 OF BP/SERVOMESH SP 150

ELECTRIC SUBMERSIBLE PUMP TYPE: PSL0301GWT250K04CA/2, 2-2, 66 PART NO. : 12601002271

RCKT 1204 M0-PM 1230 MILLING INSERT CUTTING EDGE COUNT 8 CORNER RADIUS 6MM INSERT THICKNESS 4.76MM

3 JAW 250MM DIA SELF-CENTRIC CHUCK WITH BACK PLATE, TWO SET OF EXTRA SOFT JAWS & ONE SET HARD JAW (3

GUIDE PUSHER AS PER DRG NO. 36P 2102 (WITH FIRM'S MATERIAL)

SET OF MILLING HEAD & SHANK FOR DMG/TMC CTX - BETA1250.1) CEMENTED CARBIDE SHANK DIA-12MM, OAL- 100

TOOL SET OF INTER CHANGEABLE CARBIDE ENDMILL DIA 10MM WITH CR 0.5MM. 1- INTERCHANGEABLE CARBIDE END

I. C FEED ARM TO DRG. NO. SKM-769* 3

STEEL ROUND 56mm DIA TO SPECN BS 970 PT. 1 1983 Gr. 826 M31 IN HOT ROLLED & ANNEALED CONDITION. HARDN

Forged body (Front Part) to OFAJ DRG No. F-9 G or GSF DRG No M-10176 B for Bomb 81 MM Mortar C Em

Forged body (Rear part) to OFAJ DRG No. F-10 D or GSF DRG No M-10177 A for Bomb 81 MM Mortar C Empt

FIRING PIN DISENGAGER AS PER DRG NO. 36P 1022* (WITH FIRM'S MATERIAL)

Oil servo Cut" S" of IOCL or equivalent grade Oil of BPCL/HPCL

MAGAZINE TO DRG NO IQX-12 IN FINISHED CONDITION DC NO NIL DT 11-9-03

Custom Bid for Services - PER DAY VISIT CHARGE FOR ELECTRONICA MAKE WIRECUT MACHINE Similar Category Annual Maintenance service - EPABX System

BRACKET, PART NO. -6356726, CLAMP ART NO 6350439, COVER TO PART NO. -5159430, END COVER TO PART NO. - 4070984

4100400138 ISO TURNING HOLDER FOR EXTERNAL TURNING. SCREW CLAMPING SYSTEM/S-STYLE CLAMPING. HOLDER, 4100400159 ISO TURNING INSERT VBMT/VCMT 160408 FOR STEEL ROUGH TURNING, COATED FOR LONG LIFE.

MILLING INSERT-APMT1135 PDER MEDIUM MACHINING OPERATION FOR MATERIAL IS: 5517-93 40NI6CR4M03 HARDNESS

Custom Bid for Services - REPAIR OF FANUC MAKE CARD NO A06B 6117 H103 R Similar Category Repair and Overhauling Service