Advanced Weapons And Equipment India Limited Tender Results

TOOL SET OF FACE MILL CUTTER DIA 63MM AS PER ANNEXURE ENCLOSED. ANNEX. NO. - MCO/07057

SEPARATOR PART NO. 010451050 FOR ELGI MAKE COMPRESSOR MODEL: E37-7.5

PNEUMATIC MAINTENANCE UNIT CONSISTING OF PRESSURE REDUCER, FILTER, PRESSURE GAUGE, PRESSURE SWITCH

Protective Ring for Rear copper bands to Drg. No. SK- 7723/1/A

SET OF LM GUIDE RAILS WITH RUNNER BLOCKS OF X-AXIS FOR HMT SMC-14, SMC-15 & SMC-16 MACHINES. ONE SET

THREADING INSERT R166. OG-16VM01-002 1020. THREADING INSERT 33 ER AG-60. THREADING INSERT 16 ER AG 60

SEMI- MACHINED BODY UP TO KNURLING STAGE OF 40 MM HE/T DRG NO. M-11872 (FROM INPUT MATERIAL I/C: 02

FINISH MACHINING OF LOCK PIN AS PER DRG. NO. 2A46M- 02-93

WASHER 12.1 X 3.5 MM THICKNESS OF SPRING STEEL, MAKE- TVS/UNBRAKO/LPS BOSSARD AS PER DRG. NO. 2A46M/S

TURNING INSERT FOR CHAMBER BORING FOR BARREL SANDVIK CODE TPMT 16T3 08-PM 4325. MAKE: SANDVIK/SEC

25X25 MM, OVERALL LENGTH MI ( 5 the number ten for arbitrary powers ), EDGE, INSERT THICKNESS 6.3 ( 200 the number ten for arbitrary powers )

I. C 0099008526, Filter Bag with Stainless Steel Ring, Filteration accuracy - 25 Micron, I. C- 0099008527 Filter Cartridge SS Mesh Pleated, Size: ID 20.72 mm x OD 50.92 mm x Height 73.72 mm, I. C- 0099008528 Hydraulic Filter Element, Model: Tie-06-25, Size: ID 30 mm x OD 65 mm x Height 85 mm, I. C- 0099008529 Filter Cartridge SS Mesh Pleated Size: ID 18.94 mm x 67.32 mm x OD 104.72 mm Height, I. C- 0099008530 Filter Cartridge SS Mesh Pleated, Size: ID 34.46 mm x OD 150.45 mm x Height 356 mm, I. C. 1500400626, Filter Cartridge SS Mesh Pleated, Size: ID 70 mm x OD 150 mm x Height 450 mm, I. C- 1500400627 Filter Cartridge SS Mesh Pleated, Size: ID 40 mm x OD 72 mm x Height 220 mm, I. C- 1500400628, Size: ID 40 mm x OD 73 mm x Height 275 mm, I. C- 1500400639 Hydraulic Filter Cartridge, Size: ID 30.6 mm x OD 51 mm x Height 71-72 mm

TOOL HOLDER PTFNL-4040-S-33. MAKE- SANDVIK/WIDIA/KENNAMETAL/TAEGUTEC/ISCAR/CERATIZIT.

STEEL SHEET 8 MM THICK X 625 MM X 1000 MM LONG TO SPECN BS 970 PT. I 1983 070M20. ( 437 kilogram ), ST. RD. 85MM DIA IN STD LENGTH TO SPECIFICATION IS: 5517- 1993 GRADE 42Cr4Mo2. ( 455 kilogram ), ST. SQR. 50MM IN STD LENGTH TO SPECIFICATION IS: 5517-1993 GRADE 40 Cr4 OR 42 Cr4 Mo2. ( 264 kilogram ), STEEL ROUND 56 MM DIA. IN STANDARD LENGTH TO SPECN. IS: 5517- 1993, Gd. 40C8, LRS 63 MM. SUPPLY CONDI ( 181 kilogram )

KEY AS PER DRG. NO. 074811A-00 FOR CRADLE WEAPON ASSY OF SRCG

FORGED ANNEALED STEEL PROCESSED THROUGH ANY REFINING PROCESSOF SIZE 82(+ 2-0) MM DIA. X3200(+ 10) MM LONG

CLINOMETER, DRAWING NO. CQA(I) 46, REVALIDATED

CARTRIDGE 105MM SUPER CHARGE

CARTRIDGE 105MM NORMAL CHARGE

PVC INSULATED FLEXIBLE TWIN TWISTED, UNSHEATHED MULTI STRAND COPPER WIRE (PURITY OF CU-99.8% )

CABLE PVC INSULATED FLEXIBLE TWIN TWISTED COPPER CONDUCTOR 1100V GRADE, NORMAL C. S. A. OF CONDUCTOR-0 ( 900 meter ), CABLE PVC INSULATED FLEXIBLE TWIN TWISTED, UNSHEATHED COPPER (PURITY OF CU> 99.8% ) CONDUCTOR 1100V ( 900 meter )

KIT OF SPARES OF TOOL HOLDER PCLNR 45065-19. (LEVER= 01 NO, SCREV= 11 NO. SHIM= 01 NO, SHIM PIN= 01 NO A

LCD 8.4 INCH A61L-001-0231S MAKE FANUC ( 2 the number pi ), FAN ADAPTOR PCB A20B-8002-0998 MAKE FANUC ( 2 the number pi ), CABLE A660-2007-T984L270R0 MAKE FANUC ( 2 the number pi ), LCD PANEL A02B-0319-D021 MAKE FANUC ( 2 the number pi ), 02 FAN ADAPTOR PCB, A20B-8003-0012 MAKE FANUC ( 2 the number pi )

SPECIAL MINIMASTER SHANK BODY FOR DIA 8.0MM (SH DIA- 20MM, WL-50MM, GPL-200MM, OAL-250MM) AS PER S

FORGED AND ANNEALED STEEL TOOL CARBON (STC) ROUND DIA. 83MM (+ 10MM) IN LENGTH OF 1 TO 2 METER, MSF C

ROLLED STEEL TOOL CARBON (STC) ROUND DIA. 270(+ 10MM) IN LENGTH OF 1 TO 1.5 MTR. MSF CLASS IX/3 (C% -0.

“ NEUTRAL HEAT TREATMENT SALT NC-660 IN 25 KG BAG. ”

COLLET CHUCK BT 40 ER 32 X 100 LENGTH., COLLET CHUCK BT 40 ER 40 X 70 LENGTH., COLLET CHUCK BT 40 ER 16 X 100 LENGTH., COLLET CHUCK BT 40 ER 40 X 100 LENGTH., COLLET CHUCK BT 40 ER 32 X 70 LENGTH.

FACE MILL CUTTER DIA 400MM ALONG WITH INSERT, WEDGE, WEDGE SCREW & KEY AS PER ANNEXURE-01. MAKE: DIJET

CARBIDE INSERT CNMG120408 CVD COATED, INSERT HAVING 4 CUTTING EDGES, PURE CONTACT TIME PER EDGE MINIMU, COATED CARBIDE INSERT DNMG150608 HAVING 4 CUTTING EDGES, PURE CONTACT TIME PER EDGE 50 MINUTES MINIM

1) HEAD CUTTER DIA 20MM AS DIJET CODE-MSWX-2022- M10 OR EQ. QTY-01NO. 2) CENTER INSERT AS PER DIJET COD

FURNACE FUEL OIL TO SPECIFICATION IS: 1593/1982 CAT PART NO 9130-000012

STEADYLINE HIGH FEED CUTTER DIA 80.0MM & INSERT AS PER ANNEXURE-3 MAKE- SECO/SANDVIK/KENNAMETAL/KOMET

TONED MILK FOR EMPLOYEES WORKING IN HAZARDOUS FIELD IN 500ML PACK. AS PER ANNEXURE" A" .

Machining of item as per Drg. No. LK-8730-4003/003 (CARRIAGE RAIL) in finish condition for using in

FORK LEFT TO DRG. NO. ILG-1517/1 & PART NO. IWP 1977., FORK (RT) TO DRG. NO. ILG-1560/IWP-1986., EYE BOLT TO DRG NO. ILG-1496/IWP-1965, EYE BOLT TO DRG. NO. ILG- 1506/IWP-1971.

COVER SHAFT ENCODER AS PER DRG. NO. Y25635A-00 FOR PEDESTAL ASSY OF SRCG

Manpower Outsourcing Services - Minimum wage - Semi- skilled; ITI; Others

Manpower Outsourcing Services - Minimum wage - Highly- Skilled; Diploma/Graduation; IT-Technical

BIPOD ASSEMBLY AS PER DRG. NO. 1804 01 08 00 00 000 00DB REQUIRED FOR LMG 7.62 X 51MM BELT FED

DYNAMIC MILLING LONG S. C. ENDMILL DIA 16MM, FL- 80MM, OAL-141MM, CR-1MM, NO. OF FLUTES-5, SD-16MM

TOOL SET OF HIGH FEED MILLING ARBOR TYPE CUTTER OF DIA 100mm AS PER SPECIFICATION NO.

TOOL SET OF CARBIDE NECKED BALL NOSE COPY MILLING CUTTER DIA 10MM 1- CARBIDE NECKED BALL NOSE COPY

INSERT XDKT 150508 SR-M50 CTP P235 (FOR END MILL CUTTER-2FL -DIA-25 MM

BARREL FORGING FOR PISTOL AUTO 9MM

Manpower Outsourcing Services - Minimum wage - Skilled; ITI; Others

25 MM X SH. LENGTH 56 MM, 2 EADGE CARBIDE INSERT FOR DRILL DIA 13.50 MM, INSERT WIDTH 7.08 MM, THICKNESS 2.0 MM, CR 0.40 MM NA, CARBIDE GUIDE PAD WITH DOUBLE CHAMFER, WITH WIDE 4 MM, LENGTH 16 MM, THICKNESS 2 MM & CORNER RADIUS

CLIP 5315-009479, STRIP LARGE TO DRG NO-GCF/20/SK- 792.

STEEL BOX FOR BODY SHELL 125MM HE AS PER OFC DRG NO. SK-8348

SET OF PARTS FOR ERECTION FOR AK-630M GUN WITH ALTERNATE MATERIAL(28 MECHANICAL ITEMS AS PER ATTACHE