Advanced Weapons And Equipment India Limited Tender Results

FORGING OF PISTON EXTENSION

PVD TIALN COATED 12MM DIA SOLID CARBIDE DRILL, 8.2 MM DIA SOLID CARBIDE DRILL

Manpower Outsourcing Services - Man-days based - Hiring of Manpower for upkeep & maintenance of AWEIL HQ offices 05 Nos skilled and 38 Nos unskilled workers for smooth functioning of the AWEIL HQ Kanpur on daily basis for a period of 02 years As..

Manpower Outsourcing Services - Minimum wage - Unskilled; Not Required; Others

Custom Bid for Services - CHEMICAL TESTING OF STEEL CARBON STEEL ALLOY STEEL ETC BY DILUTION ANALYSIS METHOD AS PER SPECN MATERIAL WILL BE SUPPLIED IN THE FORM OF RAW MATERIAL COMPONNENT FORGING IC ETC RAW MATERIAL SIZE WILL BE AS LOW AS 05 MM DI.. Similar Category Competitive Test Preparation Service Comprehensive Annual Maintenance Services for Precision Air Conditioners Cluster Outsourcing for Maintenance of Landline and Broadband network – OFC Network

STANDARD HSS TAP SET TO SIZE M4, M5, M6, M10 ( WITH STANDARD PITCH) MAKE: ADDISION/IT/TOTEM

DIAMOND CHISEL 0.5 CT HAVING 0.1’ ’ RADIUS 60 DEGREE ANGLE SET IN 5/16’ ’ SHANK X 2’ ’ LONG SIMILAR TO

CENTRE DRILLTYPE‘ A’ HSS SIZE; 1.25 MM PILOT DIA X 3.15 MM SHANK DIA TO SPECN. IS; 67.8- 1977 DOUBL

WINDING WIRE WITH MODIFIED POLYESTER PE(MODIFIED) ENAMELED HIGH CONDUCTIVITY PURE (PURITY> 99.9)

WINDING WIRE COPPER SUPER ENAMELLED MEDIUM COVERING CONFORMING TO IS: 4800/68 SIZE: 29 SWG.

3 POINT INTERNAL MICROMETER WITH ANALOG INDICATION AND TITANIUM COATED MEASURING PIN

3 POINT DIGITAL INTERNAL MICROMETER RANGE: 6-12 MM, LEAST COUNT- 0.001MM MAXIMUM PERMISSIBLE ERROR 4

CONTROL PANEL HOUSING (AS PER ANNEXURE-A, NO. 107/VM AK630/CP HOUSING/26-27 DT 20-05-2026

SOLID CARBIDE STRAIGHT SHANK TWIST DRILL 20 MM DIA. FL 70 MM OAL 140 MM SD 14 MM TIALN COATED FOR 50, SOLID CARBIDE DRILL STRAIGHT SHANK DIA 20 MM, FLUTE LENGTH 140 MM, OAL 200 MM.

WOODEN TABLE, SIZE: LENGTH 5FT X WIDTH 2FT. 6INCH X HEIGHT 2FT. 9INCH X WOODEN FOR THICKNESS 50MM (

Custom Bid for Services - Advanced Legal AI Ser SaaS Advanced Legal AI Services SaaS for Disciplinary Legal Processing as per Scope of Work Similar Category Hiring of Agency for IT Projects- Milestone basis

DUAL SIGHT SETTING BOARD WITH STAND FOR AGSS & BACKUP SIGHT BOTH

Manpower Outsourcing Services - Minimum wage - Unskilled; Not Required; Others

QUENCHING SALT-540, USED AS A CHLORIDE AND OR CARBONATE BASE NEUTRAL QUENCHING MEDIA IN HEAT TREATME

WINDING WIRE COPPER SUPER ENAMELLED MEDIUM COVERING CONFORMING TO IS: 4800/68 SIZE: 27 SWG.

Machining of NA Stage-I blank to drawing No. OFKR/C/0028 (job work only) Material shall be supplied

Custom Bid for Services - REPAIRING OF 01 NO FUME EXHAUST SCRUBBER UNIT FOR EXHAUSTI- NG OF FUMES OF DIFFERENT CHEMICALS AND ACID AT QC(ML) SECTI- ON WHOLE JOB BASIS AS PER ANNEXURE-I, DT:- 10/04/2026 & ANNEXURE-II, DT:-10/04/2026 Similar Category Repair and Overhauling Service

INSERTED THROUGH COOLANT T-SLOT CUTTER DIA 30-35MM WIDTH-5.0MM X DEPTH- 5.0+ -0.2MM X OAL-110MM APPRO, PRECISION GROUND INSERT WIDTH 5.0MM WITH R 0.2MM MAXCUTTING DEPTH 5.0+ - 0.2MM ISCAR CODE NO. TRI 16R, SET OF SCREW & KEY TO SUIT INSERTED T-SLOT CUTTER DIA30-35MM(1) INSERT SCREW= 03 NOS, (2) KEY WITH ( 1 set )

Manpower Outsourcing Services - Minimum wage - Skilled; High School; Others

Manpower Outsourcing Services - Minimum wage - Unskilled; High School; Others, Manpower Outsourcing Services - Minimum wage - Semi-skilled; Diploma; Others

FACE MILL CUTTER DIA 80MM, CODE NO. TASN13M080B27.0R08= 01NOB-CORNEERED INSERT, TUNGLOY CODE NO. SNGU

SOLID CARBIDE END MILL CUTTER DIA 12.0MM CEL26MM, OAL 83SHANK DIA 12.0MM, 4 FLUTEMAKE-SANDVIK/WIDIA

DIFFERENTIAL PRESSURE SWITCH FOR FILTER POLLUTION INDICATOR 3.7-5.0 BAR 10.30V MAX. 1A M12X1. INDENT

INVESTMENT CASTING FOR SLIDE (RETRACTING)

DRONE (SIZE: 1.6 M X 1.6 M X 0.5 M) (AS PER ANNEXURE-A) ., DRONE (SIZE: 0.5 M X 0.5 M X 0.5 M) (AS PER ANNEXURE- A)

DIGITAL 3 INTERNAL MICROMETER RANGE 50-100 MM LEAST COUNT 0.001 MM

3 POINT DIGITAL INTERNAL MICROMETER RANG: 100-200 MM. MAKE: TESA(SWISS MADE), MAHR, STARRET, MICROTE

REAR SIGHT LEAF (TFS) FOR TAR25 RIFLES AS PER DRG No MIM-K-2421-00

BODY TRIGGER TO DS CAT NO. 1005-006855 DC(I) NO. 27112-SA DT- 15.07. 2017 IN FINISHED CONDITION (WITH

WOODEN BOX FOR TRAVERSING CYLINDER TO DRG. NO. GCF/50/40175

KNOB BARREL LOCKING CATCH IN FINISHED CONDITION. TO DS CAT NO. 1005-000529 DC(I) NO. 27642-SA DT. 14-10

SOLID CARBIDE DRILL DIA 10.2 MM, L/D - 5, SHANK DIA - 12 MM, FLUTE LENGTH- 48 MM, OVER ALL LENGTH

SOLID CARBIDE BALL NOSE ENDMILL DIA 16 (R8) MM X CEL 32 MM X OAL 92 MM X SH. DIA 16 MM WITH TIALN

SOLID CARBIDE DRILL DIA 8MM X FL 65MM X OAL 115MM

WOODEN BOX FOR ELEVATING CYLINDER TO DRG NO. GCF/50/39084

CATCH COCKING HANDLE (MOULDING) (D/BLUE)

SIMATIC S7-300 DIGITAL OUTPUT, PART NO. 6ES7322- 1HF10-0AA0, MAKE: SIEMENS, DRIVE BLOWER MOTOR, TYPE: 6SN1162-0BA02-0AA2

SIMATIC DP ET, ET200S, SINUMERIK 828D, HHU, SIMATICS S7

Manpower Outsourcing Services - Man-days based - Hiring of Services for Fire Engine Driver FED for Fire Brigade Section at OFC as per specification no 03 01 Trade Approval FB Revision 1; Skilled; Hiring of Services for Fire Engine..

MICRO GRAIN SOLID CARBIDE CENTER CUTTING END MILL DIA 10 MM X FL 23 TO 25 X OAL 57 TO 60 X SHANK DIA

Custom Bid for Services - Comprehensive mosquito management for industrial and estate operation as per scope of work Similar Category Pest and Animal Control Service

Solid carbide end mill dia. 8mm, shank dia. 8 mm, flute length 28 to 35mm, overall length 75 to 80 mm, flutes-4, helix angle 40 to 50 degree, for alloy steel minimum 40 HRC, for finishing machining, coated for long life.

4100400710 S. C Indexable insert for shoulder mill cutter Dia. 50mm, cutting edge length min. 9 mm, ins, 4100401651 Insert screw suitable for shoulder mill cutter dia 50mm, 4100401653 Shoulder mill cutter dia 50mm, with four edged indexable insert, conn dia min. 22mm, max, 4100401655 KEY/Spanner suitable for shoulder mill cutter dia 50 mm.

4100401629 Axial drive type double sided slot milling cutter dia 125 mm, suitable for tangentially m, 4100401630 Tangentially slot mill carbide insert with 06-cutting edges, width 4.5-5 mm, re-0.8, ic-1, 4100401631 Insert screw suitable for axial drive type double sided slot milling cutter dia 125 mm, 4100401632 Key suitable for axial drive type double sided slot milling cutter dia 125mm

7.62MM SLR BODY AND BARREL ASSEMBLY FIXTURE (ANNEXURE ENCLOSED)