Buyer Organistion Tender Results

hopper or tipper Average Turn Over of Last 3 Years 100 Lakh (s) Hopper Or Tipper ( 4 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Box body Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, - Main Engine Capacity (cc) 1034 - Make of Chassis - - Type of Chassis Frame - - Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) Fuel Consumption ( 20 1/6 declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) Speed, Max (Km/Hr) 70 - Max Engine Power BHP (BHP@rpm) 21 Max Engine Torque (N-M@rpm) 61 Main Engine Aspiration Natural Aspiration Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 20 Gradeability of Vehicle with load( %) 10.2 - Gradeability of Vehicle without load ( %) 10.3 - Ground Clearance (mm) 185 Kerb Weight (Kg) 924 Gross Vehicle Weight (Kg) 1924 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - - Type of Front Axle and Suspension System - - Type of Rear Axle and Suspension System - - Type of BIS MARKED Vehicle Tyre Radial - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 5 - Type of Steering Manual Manual, Power Operated Turning Radius, Min (mm) 7700 2/6 Speed Governers yes - ABS Fitted No - Front Vehicle Brake - - Rear Vehicle Brake - - Type of Clutch - - Tipping Angle (Degree) 45 Tipper Container cap acity/Volume(cubic metres) 2 Certification Chassis Certification ARAI/VRDE/ICAT No. - - Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 24 - No. Of Free Service (Nos) 5 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3675 - Width of Chassis (mm) 1460 - Height of Chassis (mm) 1750 - Size Of Front Tyres (mm) - - Size Of Rear Tyres (mm) - - Size of Wheel (mm) 4.82 Tipper body Pivot length (mm) 0 - Tipper body Length (mm) 0 - Tipper Body Height (mm) 0 - Overall Height of Tipper from Ground (mm) 1500 - Body Plate Thickness (mm) 2 Main Frame Thickness (mm) 3 Pneumatic System false - 3/6 Hydarulic System true - Tipping Hydraulic Cylinders(Make) - - Hydraulic System Driven by Power Pack Unit - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - If Yes Auxiliary Diesel Power (HP@rpm) 0 Auxiliary Diesel Engine Transmission - - Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Dumping Height (mm) 590 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. 4/6 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dadarao Vishram Ingle 444108, Municipal Councile Telhara, Jalgao jamod road, Near post office Telhara Dist. Akola 4 15

HANDHELD BRUSH CUTTER/LINE TRIMMER HANDHELD BRUSH CUTTER/LINE TRIMMER ( 4 ) Technical Specifications Specification Specification Name Values Allowed Values TYPE Type of Machine Multi tool system with different types of attachments such as Nylon feed head Blade/Circular saw Hedgetrimmer/Pruner leaf blower attachments Line Trimmer with Nylon feed head attachment, Brush Cutter with cutting Blade/Circular saw attachment, Multi tool system with different types of attachments such as Nylon feed head/Blade/Circular saw/Hedgetrimmer Pruner/leaf blower attachments Power Source Petrol Engine Plug-in type Electric motor, Battery Powered Electric motor, Petrol Engine Speed control Variable Speed Variable Speed, Fixed Speed Transmission Low Vibration Centrifugal Clutch Centrifugal Clutch, Low Vibration Centrifugal Clutch Tool-free changing of the attachments false Castor Wheels provided to the feed head false 1/6 Handle Type Loop and bar D - Loop, Two D- Loops for both hands, Loop and bar, Bike Style Type of Harness inclusive in the scope of supply Double shoulder Strap Single Shoulder Strap, Double shoulder Strap, Backpack Harness, No Harness PERFORMANCE Cut Width/Diameter (Maximum) in mm 400 to 424 As per GeM Catalogue. SHAFT Shaft Material Aluminium Aluminium, Electro Plated Steel, Stainless Steel, Plastic Shaft Type Straight Shaft Straight Shaft, Angled Bent Shaft, Flexible Shaft Shaft configuration Single - Shaft Length (mm) 800 to 824 As per GeM Catalogue. Shaft Diameter 26 - NYLON FEED HEAD ATTACHMENT Nylon feed head attachment inclusive in the scope of supply Yes Yes, No, NA Feed head of Line Trimmer Bump/Tap & go Type Bump/Tap & go Type, NA Number of Lines Single Single, Double, NA Line (Monofilament Nylon) inclusive in the scope of supply Yes - "If 'Yes', Length of the Line Provided in the Spool 6 0, 6, 10, 20, 30 "Line Diameter (May indicate '0'if Not Applicable)" 3 0, 2, 2.5, 3, 3.5 Line Feed Manual - CUTTER/CIRCULAR SAW ATTACHMENT Blade Cutter attachment inclusive in the scope of supply Yes Yes, NA Blade Material High Carbon Steel High Carbon Steel, Hardened Steel, Plastic, NA Blade Type 3 tooth blade 2 teeth blade, 3 tooth blade, 4 tooth blade, 8 teeth blade, Circular saw, NA "Number of 2 teeth Blades inclusive in 0 0, 1, 2 2/6 the scope of supply (May indicate '0'if Not Applicable)" Number of 3 teeth Blades inclusive in the scope of supply 1 0, 2 Number of 4 teeth Blades inclusive in the scope of supply 0 0, 2 Number of 8 teeth Blades inclusive in the scope of supply 0 0, 2 Circular Saw attachment inclusive in the scope of supply No Yes, NA "Number of Circular Saw Blades inclusive in the scope of supply (May indicate '0' if Not Applicable)" 0 0, 2 Circular Saw Material NA Tungsten Carbide Steel, High Carbon Steel, NA Diameter of the Circular Saw (mm) NA 200, 225, 250, 275, 300, 3 50, 400, NA Number of Teeth in Circular Saw 0 0, 22, 30, 40, 60, 80, 120 Feed head of Blade Cutter/Circular Saw attachment Bump Type/Tap & go Type Bump Type/Tap & go Type, NA HEDGE TRIMMER ATTACHMENT Hedge Trimmer attachment inclusive in the scope of supply NA Yes, NA Cutting action NA Single action, Double action, NA Length of Hedge Trimmer Blade (mm) NA As per GeM Catalogue. Hedge Trimmer attachment adjustment angle (Max) (degree) NA - PRUNER/CHAIN SAW ATTACHMENT Pruner (Chain Saw) attachment inclusive in the scope of supply No Yes, NA Length of Pruner (Chain Saw)(mm) NA As per GeM Catalogue. Cutter Type NA - 3/6 LEAF BLOWER ATTACHMENT Leaf Blower attachment inclusive in the scope of supply NA Yes, NA Maximum Air Speed (km/hr) 0 - GENERIC Other Accessories incusive in the scope of supply multi Select Debris guard, Protection glasees, Face shield, Extension Shaft -Short (500 to 530 mm), Extension Shaft -long (970 to 1000 mm), Ear Mufflers, multi Select Cable Length (Maximum extension cord length) inclusive in the scope of supply 0 0, 15, 25, 35, 50 Overall Dimensions (mm x mm x mm) 330x300x300 - Maximum Operating Weight 8.1 - Additional features, if any This Machine can be used with a blade also. - List of Items and Quantity of each item included in the offer Debris guard-1, Visors-1, toolkit-1, Gloves-1, Blade 3T-1 - ENGINE Make/Model of the Engine - - "Engine Power Rating (Watt)" 1600 As per GeM Catalogue. "Engine Compliant to latest CPCB norms (May Indicate 'NA' if Not Applicable)" NA Yes, NA "Engine Fuel Tank Capacity (May Indicate '0' if Not Applicable)" 1 - "Sound level in dB" 96 - PRIME MOVER Battery Chemistry NA Li-Ion, Ni-MH, NiCd, SMF Lead Acid Battery, VRLA Battery, NA Battery Conforming Specification NA - Availability of Test Report for Battery as per conforming specification false 4/6 Voltage of each Battery 0 - "Number of Batteries required for operation 0 - "Number of Batteries supplied (Inclusive in the Scope of Supply) 0 0, 4 "BATTERY CAPACITY (Ah) 0 - Battery Charging Time 0 - Battery Run Time 0 As per GeM Catalogue. "Battery Charger inclusive in the scope of supply NA Yes, NA WARRANTY Warranty on Equipment 1 1, 4, 5 "Warranty on Prime Mover (May Indicate '0' if Not Applicable)" 0 0, 5 Warranty on Battery 0 0, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 P R Rajesh 700052, AIRPORTS AUTHORITY OF INDIA, NSCBI AIRPORT, KOLKATA 4 21

hopper or tipper Average Turn Over of Last 3 Years 50 Lakh (s) Hopper Or Tipper ( 8 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Box body Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, Box body Tipper - Main Engine Capacity (cc) 1396 Make of Chassis Tata Motors Type of Chassis Frame Ladder type cranked frame with inverted hat section long members & welded cross members Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG 1/6 Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 17.88 Speed, Max (Km/Hr) 80 - Main Engine Power BHP@rpm (BHP@rpm) 71 BHP @ 4000RPM - Engine Torque Max, @ rpm (N- M@rpm) 140 Nm @ 1800-3000 RPM Main Engine Aspiration Turbocharged Intercooled Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 4 Fuel Tank Capacity (Ltrs) 38 Gradeability of Vehicle with load( %) 24.93 - Gradeability of Vehicle without load ( %) 25.2 - Ground Clearance (mm) 160 Wheel Base (mm) 2380 - Kerb Weight (Kg) 1100 Gross Vehicle Weight (Kg) 2255 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) 4x2 - Type of Front Axle and Suspension System Independent, strut type - Type of Rear Axle and Suspension System Semi-elliptic leaf spring - Type of BIS MARKED Vehicle Tyre Radial - Chassis Transmission System Manual Automatic, Manual 2/6 Number of Speed Forward Gears 5 - Type of Steering Power Operated Manual, Power Operated Turning Radius, Min (mm) 5100 Speed Governers yes - ABS Fitted No - Front Vehicle Brake Disc Brake - Dual Circuit Vacuum Assisted Hydraulically Actuated - Rear Vehicle Brake Drum Brake - Dual Circuit Vacuum Assisted Hydraulically Actuated, LSPV Fitted on Rear Brakes. Type of Clutch 200 mm, Single Plate Dry Friction Type - Tipping Angle (Degree) 48 Tipper Container cap acity/Volume(cubic metres) 3.2 Certification Chassis Certification ARAI/VRDE/ICAT No. ARAI Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 15 - No. Of Free Service (Nos) 3 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 4340 - Width of Chassis (mm) 1594 - Height of Chassis (mm) 1858 - Size Of Front Tyres (mm) 165 R14 LT 8PR - Size Of Rear Tyres (mm) 165 R14 LT 8PR - Size of Wheel (mm) 14 3/6 Tipper body Pivot length (mm) 1546 - Tipper body Length (mm) 2695 - Tipper Body Height (mm) 1082 - Overall Height of Tipper from Ground (mm) 1801 - Body Plate Thickness (mm) 2 Main Frame Thickness (mm) 4 Pneumatic System false - Hydarulic System true - Tipping Hydraulic Cylinders(Make) Wipro or Equivalent Make - Hydraulic System Driven by Main Engine - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - If Yes Auxiliary Diesel Power (HP@rpm) No Auxiliary Diesel Engine Transmission 0.0 Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Dumping Height (mm) 551 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid true - 4/6 Temperature Indicator in Control Panel Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bhadgaon Municipal Council 424105, Municipal Council, Aazad chauk, Bhadgaon Dist Jalgaon 8 15 EMD Advisory Bank HDFC Bank EMD Percentage(%) 2.00 EMD Amount 100677 ePBG Required No

Vehicle Hiring Service (Long Term)

glass or window cleaners Glass Or Window Cleaners ( 300 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conformity to Indian Standard IS 8540:Latest Yes - ISI Marked Yes Yes BIS Licence Number UB/1387 - Test Report Details Availability of Test Reports from Central Govt./State Govt/NABL/IL AC accredited Lab covering all the Declared Parameters as per IS Specification Yes Yes Test Report Number 1008 - Test Report Date 03.03.2017 - Name of the Lab ERTL (Eastern Regional Test Lab) - Address of the Lab Salt Lake, Sector V, DN Block, Kolkata 700091 - Packing Size and Type Packing Size (ml) 500 500 Packing Type Container with inbuilt Spray Device Container with inbuilt Spray Device 1/2 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 uma shanker shrivastava 325220, ADMN. BUILDING, SHAKTI PARISAR, CTPP, MOTIPURA, TELSIL- CHHABRA, DISTT. BARAN, RAJASTHAN-325220 300 15 EMD Required No ePBG Required No

toilet cleaners liquid Toilet Cleaners Liquid ( 550 ) Technical Specifications Specification Specification Name Values Allowed Values Colour and Fragrance Colour COLORLESS - Fragrance of the Liquid Cleaner ODOULESS - Material Main Ingredients HCL Physical Characteristics Effective to remove Yellowish and tough Stains YES - Effective to Clean ceramic Wall and Tiles YES - Effective to clean Viterous China Toilet Bowl and its rim YES - Viscosity (N s/sq meter) 0 Disinfactant Properties YES - Safe to hands YES - No Fumes while Cleaning YES - Shelf Life (months) 6 Packing Packing Material Bottle Packing Size (ml) 1000 1000 1/2 Pack with Dispensing Nozzle false * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 uma shanker shrivastava 325220, ADMN. BUILDING, SHAKTI PARISAR, CTPP, MOTIPURA, TELSIL- CHHABRA, DISTT. BARAN, RAJASTHAN-325220 550 15 EMD Required No ePBG Required No

Air Freshener

Printer or photo Copier Paper Printer Or Photo Copier Paper ( 1000 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 14490 : Latest Yes - Test Method as per IS: 1060 Yes - Size Size and Dimension of The Paper (W X L) in mm 210 x 297 210 x 297, 297 X 420 Size of the Paper A4 A4, A3 GSM of Paper 75 75, 80, 90, 95 Quantity Number of Sheets per Ream 500 500 Physical Characteristics Brightness in % 80 Tensile Index MD in Nm/g 45 - Tensile Index CD in Nm/g 30 - Opacity in % 90 - Tear Index (Avg) in Nm.m²/g 4.5 - Smoothness for both sides (Bendtsen) in ml/min 200 - 1/3 Thickness in µm 100 - Moisture in % 5 - Stiffness MD 2 - Stiffness CD 1 - Surface Strength Dennison (Wax Pick) >= 12 A 12A - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 N R Sekar Raju 110001, Room No. 410, Ministry of Shipping Parivahan Bhawan 1000 15 Required No ePBG Required No

toilet cleaners liquid Toilet Cleaners Liquid ( 300 ) Technical Specifications Specification Specification Name Values Allowed Values Colour and Fragrance Colour BLUE - Fragrance of the Liquid Cleaner na - Material Main Ingredients LIQUID Physical Characteristics Effective to remove Yellowish and tough Stains YES - Effective to Clean ceramic Wall and Tiles YES - Effective to clean Viterous China Toilet Bowl and its rim YES - Viscosity (N s/sq meter) 10.4 Disinfactant Properties YES - Safe to hands YES - No Fumes while Cleaning YES - Shelf Life (months) 12 Packing Packing Material PLASTIC Packing Size (ml) 500 500 1/2 Pack with Dispensing Nozzle true true * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 uma shanker shrivastava 325220, ADMN. BUILDING, SHAKTI PARISAR, CTPP, MOTIPURA, TELSIL- CHHABRA, DISTT. BARAN, RAJASTHAN-325220 300 15 EMD Required No ePBG Required No

phenyl

liquid handwash Liquid Handwash ( 300 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 4199:Latest Yes - BIS Marking false CM/L Number NO - Test Report Details Availability of Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification Yes Yes, No Test Report Number 897456123 - Test Report Date 2017 - Name of the Lab FDA - Address of the Lab NEW DELHI - Material Material Aquous solution of Sodium Soaps Aquous solution of Potassium Soaps, Aquous solution of Sodium Soaps, Mixture of Aquous solution of Potassuim soaps and Sodium soaps 1/2 Colour and Fragrance Colour (Conformity to IS 4707 : latest (Part 1)) WHITE - Fragrance NATURAL - Container Type of Container Plastic Dispenser Plastic Dispenser, Plastic Container Packing Quantity per Pack (ml) 500 500 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 uma shanker shrivastava 325220, ADMN. BUILDING, SHAKTI PARISAR, CTPP, MOTIPURA, TELSIL- CHHABRA, DISTT. BARAN, RAJASTHAN-325220 300 15 EMD Required No ePBG Required No

End point protection software/appliances Average Turn Over of Last 3 Years 10 Lakh (s) Experience with Gov. Required 3 Year (s) End Point Protection Software/Appliances ( 1920 ) Technical Specifications Specification Specification Name Values Allowed Values BASIC INFORMATION OF END POINT PROTECTION SOFTWARE(GOLDEN) Category Software Software, Appliance Software/Appliance Type Subscription Subscription, Perpetual Name of Software (Centralized Management) Trend Micro Control Manager - Enterprise Edition - (per user price)(Annual Renewal Cost) - OEM Model/Part NO. tmvewwe5xlczzz - renewal (NICSI Sr. No.25) - Software/Appliance Version NA - Date of Launch of Version 2017 - FEATURES AND FUNCTIONALITY PARAMETERS(GOLDEN) Mobile Endpoints Security false Global Threat Intelligence support false Advanced Protection for Virtual false 1/5 Environments Signature based Protection false Data Protection Full disk and file Encryption false Data Loss Prevention (DLP/IDLP) capability false Storage Security false Data backup/Data recovery false Cloud-Assisted Security Network false No. of days Training provided at site 0 0, upto 5, 6 to 10, 11 to 20, 21 to 30 Number of Years upto which support (warranty) is available from OEM Franchise online 1 0, 1, 2, 3, 5 FEATURES AND FUNCTIONALITY PARAMETERS(GENERIC) Anti-virus feature false - Anti-malware feature false - Anti-phishing feature false - Anti ransom ware false - Personal Firewall false - Network Attack Blocker false - Web Control/URL filtering false - Host - based Intrusion Detection/Prevention System(HIDS/HIPS/IPS/I DS) false - Host integrity false - Application Control false - Device Control false - USB Device Control false - Vulnerability asessment and patch management false - Deception Technology false - Browser protection false - Anti-theft Protection false - End point forensic false - 2/5 File server Protection false - System Watcher false - Memory Protection false - Advance machine learning false - Content filtering capability false - Auto-Sandboxing capability true - Device Authentication capability false - Centralized Management true - SUPPORTED HARDWARE REQUIREMENTS PARAMETERS Hard Disk Space Required 100GB - RAM Size required 6GB - CPU required 4CPU - Operating Systems supported (Driver) Windows - Hyper link compatibility matrix true - GENERIC PARAMETERS OF END POINT PROTECTION SOFTWARE Free Upgradation to Higher Version with in support period yes - Number of user handling capability Unlimited - Concurrent user handling capability Unlimited - Valid Licence copy to be provided YES YES Software supplied through URL Link - Certifications Benchmarking of Software Products NA - Installation and Demonstration false - List of items included in the package License - Hyper link to Data sheet www.trendmicro.com/cl oud-content/us/pdfs/... datasheets/ds_control- manager.pdf - No of Software Appliances sold 10000 - 3/5 Number of User Referance no. 1 with in Government Department email, phone no. of concerned authority where Software/Appliance installed 1000 - Details of Government Department email, phone no. Of concerned authority where Software/Appliance installed for above NIC - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Chandra Dhameja N 110003, A BLOCK CGO COMPLEX NATIONAL INFORMATICS CENTRE NEW DELHI 1920 30 EMD Required No ePBG Required No

End point protection software/appliances Average Turn Over of Last 3 Years 10 Lakh (s) Experience with Gov. Required 3 Year (s) End Point Protection Software/Appliances ( 1920 ) Technical Specifications Specification Specification Name Values Allowed Values BASIC INFORMATION OF END POINT PROTECTION SOFTWARE(GOLDEN) Category Software Software, Appliance Software/Appliance Type Subscription Subscription, Perpetual Name of Software End Point Security Enterprise Security for Endpoints - Standard Annual Renewal Cost. - OEM Model/Part NO. ENOTWWEAXLCZZZ- Renewal (NICSI Sr. No 11) - Software/Appliance Version NA - Date of Launch of Version 2016 - FEATURES AND FUNCTIONALITY PARAMETERS(GOLDEN) Mobile Endpoints Security false Global Threat Intelligence support true Advanced Protection for Virtual Environments true 1/5 Signature based Protection true Data Protection Full disk and file Encryption false Data Loss Prevention (DLP/IDLP) capability false Storage Security false Data backup/Data recovery false Cloud-Assisted Security Network true No. of days Training provided at site 0 0, upto 5, 6 to 10, 11 to 20, 21 to 30 Number of Years upto which support (warranty) is available from OEM Franchise online 1 0, 1, 2, 3, 5 FEATURES AND FUNCTIONALITY PARAMETERS(GENERIC) Anti-virus feature true - Anti-malware feature true - Anti-phishing feature true - Anti ransom ware true - Personal Firewall true - Network Attack Blocker true - Web Control/URL filtering true - Host - based Intrusion Detection/Prevention System(HIDS/HIPS/IPS/I DS) true - Host integrity false - Application Control false - Device Control true - USB Device Control true - Vulnerability asessment and patch management false - Deception Technology false - Browser protection true - Anti-theft Protection true - End point forensic true - File server Protection false - 2/5 System Watcher true - Memory Protection true - Advance machine learning true - Content filtering capability false - Auto-Sandboxing capability true - Device Authentication capability true - Centralized Management true - SUPPORTED HARDWARE REQUIREMENTS PARAMETERS Hard Disk Space Required 100GB - RAM Size required 4Gb - CPU required 4CPU - Operating Systems supported (Driver) Windows and Linux - Hyper link compatibility matrix true - GENERIC PARAMETERS OF END POINT PROTECTION SOFTWARE Free Upgradation to Higher Version with in support period yes - Number of user handling capability Unlimited - Concurrent user handling capability Unlimited - Valid Licence copy to be provided YES YES Software supplied through URL Link - Certifications Benchmarking of Software Products NA - Installation and Demonstration false - List of items included in the package License - Hyper link to Data sheet https:/www.trendmicro .com/cloud.../datasheet s/ds_enterprise-security- endpoints.pdf - No of Software Appliances sold 10000 - Number of User 1000 - 3/5 Referance no. 1 with in Government Department email, phone no. of concerned authority where Software/Appliance installed Details of Government Department email, phone no. Of concerned authority where Software/Appliance installed for above NIC - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Chandra Dhameja N 110003, A BLOCK CGO COMPLEX NATIONAL INFORMATICS CENTRE NEW DELHI 1920 30 EMD Required No ePBG Required No

End point protection software/appliances Average Turn Over of Last 3 Years 10 Lakh (s) Experience with Gov. Required 3 Year (s) End Point Protection Software/Appliances ( 1920 ) Technical Specifications Specification Specification Name Values Allowed Values BASIC INFORMATION OF END POINT PROTECTION SOFTWARE(GOLDEN) Category Software Software, Appliance Software/Appliance Type Subscription Subscription, Perpetual Name of Software End point security trend micro vulnerability protection annual renewal cost - OEM Model/Part NO. EI3BWWE1XLCSAP - Renewal (NICSI Sr. No.13) - Software/Appliance Version NA - Date of Launch of Version 2017 - FEATURES AND FUNCTIONALITY PARAMETERS(GOLDEN) Mobile Endpoints Security false Global Threat Intelligence support true Advanced Protection for Virtual Environments true 1/5 Signature based Protection true Data Protection Full disk and file Encryption false Data Loss Prevention (DLP/IDLP) capability false Storage Security false Data backup/Data recovery false Cloud-Assisted Security Network false No. of days Training provided at site 0 0, upto 5, 6 to 10, 11 to 20, 21 to 30 Number of Years upto which support (warranty) is available from OEM Franchise online 1 0, 1, 2, 3, 5 FEATURES AND FUNCTIONALITY PARAMETERS(GENERIC) Anti-virus feature false - Anti-malware feature false - Anti-phishing feature false - Anti ransom ware false - Personal Firewall false - Network Attack Blocker false - Web Control/URL filtering false - Host - based Intrusion Detection/Prevention System(HIDS/HIPS/IPS/I DS) true - Host integrity false - Application Control false - Device Control false - USB Device Control false - Vulnerability asessment and patch management true - Deception Technology false - Browser protection false - Anti-theft Protection false - End point forensic false - File server Protection false - 2/5 System Watcher false - Memory Protection false - Advance machine learning false - Content filtering capability false - Auto-Sandboxing capability true - Device Authentication capability true - Centralized Management true - SUPPORTED HARDWARE REQUIREMENTS PARAMETERS Hard Disk Space Required 100GB - RAM Size required 4GB - CPU required 4CPU - Operating Systems supported (Driver) Windows and linux - Hyper link compatibility matrix true - GENERIC PARAMETERS OF END POINT PROTECTION SOFTWARE Free Upgradation to Higher Version with in support period yes - Number of user handling capability Unlimited - Concurrent user handling capability Unlimited - Valid Licence copy to be provided YES YES Software supplied through URL Link - Certifications Benchmarking of Software Products NA - Installation and Demonstration false - List of items included in the package License - Hyper link to Data sheet https:/www.trendmicro .com/.../trendmicro/.../p roducts/.../vulnerability. ../ds_vulnerabi... - No of Software Appliances sold 10000 - Number of User 1000 - 3/5 Referance no. 1 with in Government Department email, phone no. of concerned authority where Software/Appliance installed Details of Government Department email, phone no. Of concerned authority where Software/Appliance installed for above NIC - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Chandra Dhameja N 110003, A BLOCK CGO COMPLEX NATIONAL INFORMATICS CENTRE NEW DELHI 1920 30 EMD Required No ePBG Required No

Naphthalene Balls

Human Resource Outsourcing Service

Human Resource Service

Email security software/appliances transaction security and virus protection software Email Security Software/Appliances Transaction Security And Virus Protection Software ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values BASIC INFORMATION OF E-MAIL SECURITY SOFTWARE (GOLDEN) Category Software Software, Appliance Software Type Domain Secure Mail Gateway Mail Server Security, Secure Mail Gateway Type of license Subscription Subscription, Perpetual Name of Software SMARTNET for Cisco Ironport X1070 N/A OEM Model/Part No. SMARTNET for Cisco Ironport X1070 N/A Software Description SMARTNET for Cisco Ironport X1070 N/A Software Version SMARTNET for Cisco Ironport X1070 N/A Date of Launch of Version Latest N/A FEATURES & FUNCTIONALITY PARAMETERS (GOLDEN) E-Mail Authentication Technology Supported N.A. Sender Policy Framework (SPF), Domain Keys Identified Mail (DKIM), Domain-based Message Authenticatio n, Reporting and Conformance 1/4 (DMARC), Hybrid, N.A. Digital signature feature false Encryption feature false Data Leakage Protection/Data Loss Prevention capability false Sandboxing capability false Threat Intelligence capability false E-Mail Authentication capability false Deployment options On-Premises (Client Server) Cloud, Virtual, On- Premises (Client Server) Installation and Demonstration false No. of days Training Provided at Site (Days) 0 0, upto to 5, 6 to 10, 11 to 20, 21 to 30 Number of Years upto which Support is available from OEM/Franchise online (Years) 1 1, 2, 3, 5 Maximum user handling capability (Users) Above 10000 Upto 25, Upto 100, Upto 1000, Upto 5000, Upto 10000, Above 10000 FEATURES & FUNCTIONALITY PARAMETERS (GENERIC) Anti-spam feature false N/A Anti-malware feature false N/A Anti-phishing feature false N/A Anti-Ransomware feature false N/A Anti-Bulk mail feature false N/A Content filtering feature false N/A SUPPORTED HARDWARE REQUIREMENT PARAMETERS Hard Disk Space Required NA N/A RAM Size required NA N/A CPU required NA N/A Other specifications, if any NA N/A 2/4 Operating Systems supported (Driver) NA N/A Supported Devices NA N/A Supported Servers NA N/A Min Processor bench mark score required Na N/A GENERIC PARAMETERS OF E-MAIL SECURITY SOFTWARE Free Upgradation to Higher Version within support period YES YES Concurrent user handling capability NA N/A Certifications Benchmarking of Software Products NA N/A List of items included in the package Smartnet Support N/A Hyper link to Data sheet https:/www.cisco.com c/en/us/support/securit y/email-security-applia nce-x1070/model.html N/A Details of Government Department email, phone no Of concerned authority where Appliance/Software installed for above NIC N/A * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Chandra Dhameja N 110003, A BLOCK CGO COMPLEX NATIONAL INFORMATICS CENTRE NEW DELHI 10 30 EMD Required No ePBG Advisory Bank State Bank of India ePBG Percentage(%) 5.00 Duration of ePBG required (Months). 15

Email security software/appliances transaction security and virus protection software Email Security Software/Appliances Transaction Security And Virus Protection Software ( 35000 ) Technical Specifications Specification Specification Name Values Allowed Values BASIC INFORMATION OF E-MAIL SECURITY SOFTWARE (GOLDEN) Category Software Software, Appliance Software Type Domain Secure Mail Gateway Mail Server Security, Secure Mail Gateway Type of license Subscription Subscription, Perpetual Name of Software Cisco E-mail Security Software N/A OEM Model/Part No. Cisco Email Security Lic, ESA-ESP-LIC, ESA-IMS- LIC, ESA-MFE-LIC, SMA- EMGT-LIC, L-ESA-GSU- LIC, ESA-AMP-LIC for ESA-X1070-K9 N/A Software Description Cisco E-mail Security Premium Software Bundle N/A Software Version NA N/A Date of Launch of Version Latest N/A FEATURES & FUNCTIONALITY PARAMETERS (GOLDEN) E-Mail Authentication Technology Supported N.A. Sender Policy Framework (SPF), Domain Keys Identified Mail 1/4 (DKIM), Domain-based Message Authenticatio n, Reporting and Conformance (DMARC), Hybrid, N.A. Digital signature feature true Encryption feature true Data Leakage Protection/Data Loss Prevention capability true Sandboxing capability true Threat Intelligence capability true E-Mail Authentication capability true Deployment options On-Premises (Client Server) Cloud, Virtual, On- Premises (Client Server) Installation and Demonstration true No. of days Training Provided at Site (Days) upto to 5 0, upto to 5, 6 to 10, 11 to 20, 21 to 30 Number of Years upto which Support is available from OEM/Franchise online (Years) 1 1, 2, 3, 5 Maximum user handling capability (Users) Above 10000 Upto 25, Upto 100, Upto 1000, Upto 5000, Upto 10000, Above 10000 FEATURES & FUNCTIONALITY PARAMETERS (GENERIC) Anti-spam feature true N/A Anti-malware feature true N/A Anti-phishing feature true N/A Anti-Ransomware feature true N/A Anti-Bulk mail feature true N/A Content filtering feature true N/A SUPPORTED HARDWARE REQUIREMENT PARAMETERS Hard Disk Space Required 2.4TB N/A RAM Size required 32GB N/A 2/4 CPU required 2 X 2.4 GHz 6Core N/A Other specifications, if any NA N/A Operating Systems supported (Driver) NA N/A Supported Devices NA N/A Supported Servers NA N/A Min Processor bench mark score required NA N/A GENERIC PARAMETERS OF E-MAIL SECURITY SOFTWARE Free Upgradation to Higher Version within support period YES YES Concurrent user handling capability N/A as this is not an appliance N/A Valid Licence copy to be provided YES N/A Software supplied through URL Link N/A Certifications Benchmarking of Software Products FIPS N/A List of items included in the package Software N/A Hyper link to Data sheet https:/www.cisco.com c/en/us/products/collat eral/security/email-sec urity-appliance/data- sheet-c78-729751.html N/A Details of Government Department email, phone no Of concerned authority where Appliance/Software installed for above NIC, [email protected] N/A * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Chandra Dhameja N 110003, A BLOCK CGO COMPLEX NATIONAL INFORMATICS CENTRE NEW DELHI 35000 30 EMD Required No 3/4 ePBG Advisory Bank State Bank of India ePBG Percentage(%) 5.00 Duration of ePBG required (Months). 15

Printer

Desktops

operating system software Operating System Software ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values BASIC INFORMATION OF OPERATING SYSTEM SOFTWARE(GOLDEN) Software Domain Type Proprietary Item Proprietary Item Name of Software WinSvrSTDCore 2016 SNGL OLP 2Lic C CoreLic (16 Core/8 licenses - Name of the OEM Microsoft - OEM Model/Part No. 9EM-00123 - Product Id of OEM 9EM-00123 - Software Version/Version Name WinSvrSTDCore 2016 - Date of Launch of Version 2016 - FEATURES AND FUNCTIONALITY PARAMETERS(GOLDEN) Type of Operating System Server (Network) Operating System Server (Network) Operating System Tasking multi-tasking OS multi-tasking OS Users Multi User Multi User Distributed Operating System false Resource Access Control true If Yes, details of Access Control SVR CAL - 1/4 Installation and Demonstration true true Supports Virtualization true No. of days Training Provided at Site (DAYS) UPTO 5 0, UPTO 5, 6 TO 10, 11 to 20 Number of Years upto which Support(Warranty) is available from OEM Franchise online (YEARS) 3 1, 2, 3, 5 FEATURES AND FUNCTIONALITY PARAMETERS(GENERIC) Real-time Operating System true - Library Operating System true - Graphical User Interface (GUI) true - Supported File Systems Disk file systems - Kernel Type Micro Kernel - Package Management true - If Yes, details of Packages Proprietary software systems - Bit-type (BITS) 64 - Native APIs false - Non-Native APIs supported through subsytems false - If Yes, details of supported APIs NA - Subsystem Isolation Mechanisms false - If Yes, details of Isolation Mechanisms NA - High availability extension true - Integrated Firewall true - If Yes, details of Firewall WINDOWS FIREWALL - Encrypted File System false - SUPPORTED HARDWARE REQUIREMENT PARAMETERS Hard Disk Space required (GB) 20 - RAM Size required 4 - CPU Required 1 - 2/4 Operating Systems supported (Driver) Windows Based - Supported Devices NA - Supported Web browsers Internet Explorer - Supported Database SQL, Oracle - Number of Devices Managed 1 - GENERIC PARAMETERS OF OPERATING SYSTEM SOFTWARE Free Upgradation to Higher Version YES - Maximum user handling capability 250 - Concurrent user handling capability 1 - Valid Licence copy to be provided YES - Software supplied through URL Link - List of items included in the package license - Hyper link to Data sheet www.microsoft.com - No of Software sold 50 - Number of User Referance no. 1 with in Government Department email, phone no.Of concerned authority where Software/Appliance installed 1 - Details of Government Department email, phone no.Of concerned authority where Software/Appliance installed for above. Border Security Forces, CGO Complex Delhi - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mayank Kaura 110070, Delhi Transco Ltd, Switch Gear Store, D-2, Vasant Kunj, Opposite Canara Bank Kishangarh, New Delhi, South Delhi, Delhi-110070 2 15 3/4

LED Luminaire (For Road and Street Lights) Average Turn Over of Last 3 Years 15 Lakh (s) Experience with Gov. Required 3 Year (s) LED Luminaire (For Road And Street Lights) ( 900 ) Technical Specifications Specification Specification Name Values Allowed Values STANDARDS LED Luminaire conformity to IS:10322/Part 5/Section 3/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest Yes - Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes - Types of LED Luminaire as per the IS: 16107(Part-2 Sec.-1)/2012 Type B - Types of LED Modules as per the IS:IS: 16103(Part-2)/2012 Type 3 - LED Rating (in Watts)/System Wattage/Rated Power 110W 110W Luminaire System Efficacy (Lumen/watt) >/= 100 Lm/Watt - 1/7 Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest IP66 - Warranty for free replacement (in years) 2 2, 3, 4, 5 ELECTRICAL EFFICIENCY Input operating Voltage range and frequency 140 to 270 V olts AC at 50 Hz+/-2 with auto cutt off at below 120V - Automatic Higher Cut off voltage above 300 volt Yes - Rated voltage 230 V AC 50 Hz - AC Power Factor at full load ≥ 0.95 - Driver Efficiency (in %age) Upto 100W: ≥85%, Above 100W: >/=90% Yes - Total Harmonics Distortion ≤ 10 - "The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl. 8 of IS:16104:2012 lates)" Yes - OPTICAL LED chip Efficacy ≥130 Lm/Watt - Colour temperature 6000+/-500K - Working life for LED (Minimum 50, 000 burning hours as per LM-80 and LM 21 reports) Yes - Colour Rendering Index(CRI) ≥70 - LED Beam Angle ≥120 - Optic lense materal (UV stabilised) Poly carbonate lense - THERMAL MANAGEMENT Heat sink should be die- cast aluminium along with sufficient heat sink fins to dissipate heat effectively Yes - Junctiojn/Soldering point temperature shall not exceed 85 deg.c as per LM 80 report Yes - 2/7 Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes - Operating temperature range -10 deg C to +50 deg C -20 deg. C to +50 deg. C, 10 deg C to +50 deg C, 10 deg C to +55 deg C Operating Humidity Range 10 % to 95% RH - PROTECTION Short circuit Protection Yes - Over load protecton Yes - Over Voltage protection Yes - Reverse polarity Yes - High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes - Insulation resistance between earth and current carrying part >100 M Ohm - The luminaire shall be protected against surges and transients ( Internal) >/=5KV - The luminaire shall be protected against surges and transients of >/=10KV (External) Yes - CONSTRUCTIONAL The Luminaires casing/housing (single piece housing) shall be pressure die casted aluminium alloy with higher thermal conductivity Yes - The luminaire body must be corrosion resistant powder coated Yes - All fastners must be of stainless steel Yes - Protection of the entire housing (both LED section and driver section) as per IS:10322 (Part 1):1982 latest IP66 - 3/7 Extruded silicon loop gasket shall be provided in the lantern body to ensure a weather proof seal between the UV Glass cover and the metal housing to exclude the entry of the dust, water, insects etc., Yes - Luminaries light transparency should be of Toughened glass Yes - Toughned transparent glass cover thickness >/=4 mm - Toughned Glass shall not get discoloured shall not suffer degration due to heat and ageing within warranty period Yes - Number of electronic control gear (power supplies) 1 No. 1 No., 2 Nos., 3 Nos., 4 Nos. Light Source SMD LED Chip as per LM 80/IS16106 - Driver components shall be industrial grade or above Yes - PCB shall be FR4 grade minimum 0.8 to 1.0 mm thick or more Yes - The Luminaires works on single phase three wires system (Phase, Neutral and Earth) Yes - Suitable connector shall be provided for LED connection between driver output and LED Yes - Length of ISI marked three core wire (shall be provided along with supply of material) 50 cm 50 cm, 100 cm MARKING "Manufactures Name and and brand on the aluminium die cast body " Engraved/Embossed - 4/7 Manufacturer’s name, model number, serial number Yes - Date of manufacture (month-year), and lot number as identification mark inside each unit and the outside of each packaging box Yes - The operation characteristics voltage and power be marked inside of each LED luminaire unit Yes - Diameter of pole Luminiare suitable for: (upto 45W Pole OD: shall be 40mm), (>45W<120W Pole OD: Shall be 50 mm), (above 120W: OD shall be 60 mm for which luminiare is suitable Yes - REPORTS AND CERTIFICATIONS LED Make OSRAM/NICHIA/CREE SAMSUNG/SEOUL LUMILEDS/PHILIPS SYSKA/LUMENMAX EVERLIGHT/EDISON BRIDGELUX NATIONSTAR/REFOND - System must have EMI/EMC compliance as applicable (Test reports shall be furnish to the buyer/consignee on demand) Yes - LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-79 report shall have total lumen output, power, PF, Current in Amps, CRI & CCT etc., ) Yes - LM 80 & TM 21 (Ref. IS:16105:2012) Report and Photo biological Yes - 5/7 report for LED report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-80 report shall have the Pohoto Biological report of the LED Chip being used in the luminaire) Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-3/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes - Seller shall furnish the Type test reports to the buyer/consignee on demand Yes - DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes - LED Luminaire for road and street lighting shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 3): 2012 as applicable on date Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Maheshwari Sharan 284202, NAGAR PALIKA PARI SHAD-GURSARAI-JHANSI- UTTAR PRADESH 900 30 EMD Advisory Bank HDFC Bank EMD Percentage(%) 2.00 6/7 EMD Amount 164684 ePBG Required No

Multifunction Machines

Air Conditioner

Desktops Average Turn Over of Last 3 Years 900 Lakh (s) Desktops ( 774 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel Intel, AMD Processor Generation 7th 7th, 8th Processor Intel Core i5-7400 (3.0 GHz, 6 MB Cache, 4 Cores) AMD A10- 9700 (3.5 GHz, 2 MB Cache, 4 Cores ), Intel Core i5-7400 (3.0 GHz, 4 Cores), AMD Ryzen 3 1300 (3.5 GHz, 8 MB Cache, 4 Core) Motherboard Chipset Intel Q270 Intel Q270, AMD B SERIES Expansion Slots (PCIe x 1) (Number) 1 - Expansion Slots (PCIe x 4) (Number) 0 - Expansion Slots (PCIe x 16) (Number) 2 - Graphics Graphics Type Integrated - Graphic Memory N/A - Operating System Operating System (Pre-Loaded) Windows 10 Professional Windows 10 Professional 1/5 RAM Type of RAM DDR 4 - RAM Size (GB) 8 8, 16 RAM Expandability upto (GB) 32 32, 64 RAM Speed (MHz) 2400 - Storage Hard Disk (GB) 1000 1000 Cabinet Cabinet Tower - Cabinet Volume (Litres) - - Internal Bays 2 - External Bays (Number) 2 - DIMM Slots (Number) 4 - Connectivity Wireless Wi-Fi 802.11ac + Bluetooth - Network Connectivity 10/100/1000 on board Integrated Gigabit Port - Ports USB Port 2.0 (Number) 4 - USB Port 3.0 (Number) 6 - Serial Port true - Parallel Port true - VGA true - HDMI true - Display Port true - Monitor Monitor Size (INCHES) 19.5 19.5 Monitor Resolution (PIXELS) 1600 x 900 1440 x 900, 1600 x 900, 1920x1080, 3840 x 2160 Monitor Certification - - Power Power Supply (Watt) - - Minimum Power Efficiency(%) 85 - Certification ROHS Compliance Yes - BEE/Energy Star for the given Model true - Input Devices Mouse Optical - Keyboard Standard - Generic Optical Drive DVD R/W - Internal Speaker true - On Site OEM Warranty (Year) 5 5 2/5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Guttala Hari Prasad 768020, MAHANADI COALFIELDS LIMITED, PO - JAGRUTI VIHAR, BURLA 329 90 2 SUNIL TUKARAM DAJGUDE 768211, Office of the Chief General Manager, Lakhanpur Area, At/PO Bandhbahal, Via, Belpahar Dist Jharsuguda-768211 445 90 EMD Advisory Bank HDFC Bank EMD Percentage(%) 2.00 EMD Amount 762762 ePBG Advisory Bank State Bank of India ePBG Percentage(%) 10.00 Duration of ePBG required (Months). 62

Cardiac Troponin T TEST KIT Cardiac Troponin T TEST KIT ( 300 ) Technical Specifications Specification Specification Name Values Allowed Values CONFIGURATION Purpose of Troponin T/I Kit Diagnosis of myocardial infarction by determination of Cardiac Troponin T - Should be packed as single unit containing the kit anti coagulant syring YES - Suitable for Human Sample Type Blood Blood, Plasma, Serum Ability to Evaluate Negative or Positive test result YES - Should measure the enzyme using only Kit &amp; Blood, no other reagent should be needed YES - Weight (gms) 30 - Volume of Sample required for testing (micro lit) 80 Recommended Storage Condition; Relative Humidity (%) 80 - 1/2 Recommended Storage Condition; Temperature (Degree C) 2-30 - Recommended Operating Temp Range (o C) 2-30 - Recommended Operating Humidity Range (%) 80 - Certification Available YES - Dimensions L X B X H (mm x mmx mm) 80x30x10 - Max. Test Duration (Min) 20 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shashi kant 249201, Virbhadra Road, Shivaji Nagar, Near Bairaj Lake, Rishikesh, Uttarakhand 300 15

Portable Mobile Test Kit

Cardiac Troponin T TEST KIT Cardiac Troponin T TEST KIT ( 300 ) Technical Specifications Specification Specification Name Values Allowed Values CONFIGURATION Purpose of Troponin T/I Kit Diagnosis of myocardial infarction by determination of Cardiac Troponin T - Should be packed as single unit containing the kit anti coagulant syring YES - Suitable for Human Sample Type Blood Blood, Plasma, Serum Ability to Evaluate Negative or Positive test result YES - Should measure the enzyme using only Kit &amp; Blood, no other reagent should be needed YES - Weight (gms) 10 - Volume of Sample required for testing (micro lit) 10 Recommended Storage Condition; Relative Humidity (%) 50 - 80 - 1/2 Recommended Storage Condition; Temperature (Degree C) 2-35 - Recommended Operating Temp Range (o C) 2-35 - Recommended Operating Humidity Range (%) 50 - 80 - Certification Available YES - Dimensions L X B X H (mm x mmx mm) 65x30x20 - Max. Test Duration (Min) 20 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shashi kant 249201, Virbhadra Road, Shivaji Nagar, Near Bairaj Lake, Rishikesh, Uttarakhand 300 15

Cardiac Troponin T TEST KIT Cardiac Troponin T TEST KIT ( 150 ) Technical Specifications Specification Specification Name Values Allowed Values CONFIGURATION Purpose of Troponin T/I Kit Diagnosis of myocardial infarction by determination of Cardiac Troponin T - Should be packed as single unit containing the kit anti coagulant syring YES - Suitable for Human Sample Type Blood Blood, Plasma, Serum Ability to Evaluate Negative or Positive test result YES - Should measure the enzyme using only Kit &amp; Blood, no other reagent should be needed YES - Weight (gms) 20 - Volume of Sample required for testing (micro lit) 80 Recommended Storage Condition; Relative Humidity (%) 30-80 - 1/2 Recommended Storage Condition; Temperature (Degree C) 2-30 - Recommended Operating Temp Range (o C) 2-30 - Recommended Operating Humidity Range (%) 30-80 - Certification Available YES - Dimensions L X B X H (mm x mmx mm) 60X20X15 - Max. Test Duration (Min) 20 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shashi kant 249201, Virbhadra Road, Shivaji Nagar, Near Bairaj Lake, Rishikesh, Uttarakhand 150 15

Cardiac Troponin T TEST KIT Cardiac Troponin T TEST KIT ( 500 ) Technical Specifications Specification Specification Name Values Allowed Values CONFIGURATION Purpose of Troponin T/I Kit Diagnosis of myocardial infarction by determination of Cardiac Troponin T - Should be packed as single unit containing the kit anti coagulant syring YES - Suitable for Human Sample Type Blood Blood, Plasma, Serum Ability to Evaluate Negative or Positive test result YES - Should measure the enzyme using only Kit &amp; Blood, no other reagent should be needed YES - Weight (gms) 25.0 - Volume of Sample required for testing (micro lit) 1.0 Recommended Storage Condition; Relative Humidity (%) 80 - 1/2 Recommended Storage Condition; Temperature (Degree C) 30 - Recommended Operating Temp Range (o C) 2 - Recommended Operating Humidity Range (%) 80 - Certification Available YES - Dimensions L X B X H (mm x mmx mm) 89x12x5 - Max. Test Duration (Min) 20.0 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shashi kant 249201, Virbhadra Road, Shivaji Nagar, Near Bairaj Lake, Rishikesh, Uttarakhand 500 15

Cardiac Troponin T TEST KIT Cardiac Troponin T TEST KIT ( 300 ) Technical Specifications Specification Specification Name Values Allowed Values CONFIGURATION Purpose of Troponin T/I Kit Diagnosis of myocardial infarction by determination of Cardiac Troponin T - Should be packed as single unit containing the kit anti coagulant syring YES - Suitable for Human Sample Type Blood Blood, Plasma, Serum Ability to Evaluate Negative or Positive test result YES - Should measure the enzyme using only Kit &amp; Blood, no other reagent should be needed YES - Weight (gms) 25 - Volume of Sample required for testing (micro lit) 80 Recommended Storage Condition; Relative Humidity (%) 80 - 1/2 Recommended Storage Condition; Temperature (Degree C) 0-30 - Recommended Operating Temp Range (o C) 0-30 - Recommended Operating Humidity Range (%) 80 - Certification Available YES - Dimensions L X B X H (mm x mmx mm) 25 - Max. Test Duration (Min) 20 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shashi kant 249201, Virbhadra Road, Shivaji Nagar, Near Bairaj Lake, Rishikesh, Uttarakhand 300 15

poct point of care test and bio markers Poct Point Of Care Test And Bio Markers ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Point of Care Test (POCT) Equipment Instrument Shall have multi-analysis platform compatible for running: yes, Cardiac Markers, Infection Bio Markers, DAT (Drug Of Abuse), Cancer Markers, Nicotine Test, Malaria, Dengue yes, Dengue Immuno Assay reader Monitor Colour Touch Screen Colour Touch Screen Weight of instrument 1.8 - Instrument bsed on digital imaging system (Thermal Image of Control and Test Line) yes - Bi-directional link to LAB EDP or LIS System yes - Reader Result Form Both Quantitative and Qualtitative - Storage Capacity (Minimum 10 K test result) yes - Printer In-Built and able to print on LAN - Features 1. Can send e-mail 2. USB Port for saving data - 1/3 Screen Size (LENGTH ) dimension 10 - Screen Size (WIDTH) (dimension) 10 - Warranty Warranty period 3 - Features of Test Kits used with POCT Equipment Inbuilt Control Yes - Result to be displayed within time duration 15 Kit life 18 Room Temperature Storage 2-30 Degree C Yes - Bar Code On Each Kit Yes - Test Can Be Performed With : Whole Bood, Serum, Plasma Whole Bood, Plasma Certifications Certification for POCT Equipment & Kits CE European - Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification false - Type test report Number and date na - Name & address of Laboratory issuing Test report na - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shashi kant 249201, Virbhadra Road, Shivaji Nagar, Near Bairaj Lake, Rishikesh, Uttarakhand 1 15 Required No ePBG Required No

hopper or tipper Experience with Gov. Required 5 Year (s) Hopper Or Tipper ( 3 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, - Main Engine Capacity (cc) 702 Make of Chassis - - Type of Chassis Frame - - Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) Fuel Consumption ( 21.5 1/5 declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) Speed, Max (Km/Hr) 60 - Main Engine Aspiration Natural Aspiration Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 30 Gradeability of Vehicle with load( %) 16.38 - Gradeability of Vehicle without load ( %) 18 - Ground Clearance (mm) 160 Wheel Base (mm) 2100 - Kerb Weight (Kg) 720 Gross Vehicle Weight (Kg) 1700 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - - Type of Front Axle and Suspension System - - Type of Rear Axle and Suspension System - - Type of BIS MARKED Vehicle Tyre Tube - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 4 - Type of Steering Manual Manual, Power Operated Turning Radius, Min (mm) 4300 Speed Governers No - ABS Fitted No - 2/5 Front Vehicle Brake - - Rear Vehicle Brake - - Type of Clutch - - Tipping Angle (Degree) 48 Tipper Container cap acity/Volume(cubic metres) 2.5 Certification Chassis Certification ARAI/VRDE/ICAT No. - - Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 12 - No. Of Free Service (Nos) 5 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3800 - Width of Chassis (mm) 1500 - Height of Chassis (mm) 1845 - Size Of Front Tyres (mm) - - Size Of Rear Tyres (mm) - - Size of Wheel (mm) 4 Tipper body Pivot length (mm) 1546 - Tipper body Length (mm) 2165 - Tipper Body Height (mm) 672 - Overall Height of Tipper from Ground (mm) 1491 - Body Plate Thickness (mm) 2 Main Frame Thickness (mm) 3 Pneumatic System true - Hydarulic System true - Tipping Hydraulic - - 3/5 Cylinders(Make) Hydraulic System Driven by Main Engine - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation true - Auxiliary Diesel Engine Transmission - - Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Dumping Height (mm) 354 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter true - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 4/5 1 Theware Jitendra 431714, muncipal council kandhar 3 15 Advisory Bank HDFC Bank EMD Percentage(%) 1.00 EMD Amount 14702 ePBG Advisory Bank State Bank of India ePBG Percentage(%) 2.00 Duration of ePBG required (Months). 14

hopper or tipper Average Turn Over of Last 3 Years 1500 Lakh (s) Experience with Gov. Required 5 Year (s) Hopper Or Tipper ( 20 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Box body Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, - Main Engine Capacity (cc) 1396 Make of Chassis - - Type of Chassis Frame - - Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) 1/7 Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 17.88 Speed, Max (Km/Hr) 80 - Main Engine Power BHP@rpm (BHP@rpm) 71 BHP @ 4000RPM - Engine Torque Max, @ rpm (N-M@rpm) 140 Nm @ 1800-3000 RPM - Main Engine Aspiration Turbocharged Intercooled Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 4 Fuel Tank Capacity (Ltrs) 38 Gradeability of Vehicle with load( %) 24.93 - Gradeability of Vehicle without load ( %) 25.2 - Ground Clearance (mm) 160 Wheel Base (mm) 2380 - Kerb Weight (Kg) 1100 Gross Vehicle Weight (Kg) 2255 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - - Type of Front Axle and Suspension System - - Type of Rear Axle and Suspension System - - Type of BIS MARKED Vehicle Tyre Radial - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 5 - Type of Steering Power Operated Manual, Power 2/7 Operated Turning Radius, Min (mm) 5100 Speed Governers yes - ABS Fitted No - Front Vehicle Brake - - Rear Vehicle Brake - - Type of Clutch - - Tipping Angle (Degree) 48 Tipper Container cap acity/Volume(cubic metres) 3.2 Certification Chassis Certification ARAI/VRDE/ICAT No. - - Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 15 - No. Of Free Service (Nos) 3 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 4340 - Width of Chassis (mm) 1594 - Height of Chassis (mm) 1858 - Size Of Front Tyres (mm) - - Size Of Rear Tyres (mm) - - Size of Wheel (mm) 14 Tipper body Pivot length (mm) 1546 - Tipper body Length (mm) 2695 - Tipper Body Height (mm) 1082 - Overall Height of Tipper from Ground (mm) 1801 - Body Plate Thickness (mm) 2 3/7 Main Frame Thickness (mm) 4 Pneumatic System false - Hydarulic System true - Tipping Hydraulic Cylinders(Make) - - Hydraulic System Driven by Main Engine - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - Auxiliary Diesel Engine Transmission - - Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Dumping Height (mm) 551 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - Paint Automotive Paint - 4/7 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Jayesh Babhutrav Bhairav 425412, Dr. Hendagewar Marg 20 15

thermal imager Average Turn Over of Last 3 Years 10 Lakh (s) Experience with Gov. Required 3 Year (s) Thermal Imager ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values PERFORMANCE FEATURES Type Hand held - Detector Resolution (minimum) (pixel) 100000 75000, 100000 Temperature Range of Objects (Degree Celsius) -20 to +500 -20 to +500 Temperature measuring accuracy of reading (or better) ± 2% oC ± 2% oC Minimum Focus distance 10 10, 20, 65 Image capture frequency/frame rate (Hz) N ≥ 9 - Image Detector Type Uncooled focal plane array (FPA)Vox Asi/BST/Silicon - Thermal sensitivity (NETD) 0.05 0.05 User selectable Between 0.01 and 1 - 1/5 Emissivity setting/correction Infrared spectral band (micrometer) Between 8 and 14 - Image Palettes 11 - LENS MEASUREMENTS FEATURES Horizontal Field of View of Standard lens (degree) 20-25 - Vertical Field of View of Standard lens 14-20 - Horizental Field of View of Telephoto lens 13-15 9-12, 13-15, 15-20, 20-25, NA Vertical Field of View of Telephoto lens 7-12 7-12, 15-21, 20-26, NA IFOV of Standard lens (mRad) 2.1 - IFOV of Telephoto Lens (mRad) 0.5 0.5, 0.65, 0.7, 0.75, 0.87, 1, NA IFOV of (Spatial resolution) (mRad) 1.31 - DISPLAY Display Type Color LED Color LCD, Color LED Display size 3 GENERAL FEATURES Image capture, review and save mechanism One handed image capture, review and save capability - Storage medium Mini SD card, SD Memory card, USB stick - Size of USB stick 8 - File formats JPEG, BMP, GIF, PNG, TIFF - Built-in digital camera/Visual Camera Resolution (Mpixel) N ≥ 1 N ≥ 1 Details of Operating functions Easy Touch And Simple Toggle Button - Facility for the adjustment/selection of the time/date etc yes - Interface for image transfer Mini SD card, USB stick storage medium, Bluetooth, USB Cable with suitable drivers for downloading to PC - 2/5 Focus Auto - other features - - OPERATING CONDITION Minimum Operating Temperature -10 - Maximum Operating Temperature 50 - Operating Humidity (RH) 95 - POWER REQUIREMENT Power Requirements Battery Operated - chemistry of the battery lithium ion - Voltage of rechargeable Battery 7.4 - Capacity of rechargeable battery (milliAH) 2600 - Suitable charger/adapter provided yes - Battery Backup 4 - Power Management Automatic shut down User Selectable - On-screen battery level indicator yes - CERTIFICATION & SAFETY IP Protection IP54 - Safety certification UL, CE - GENERIC Size/dimension 105×245×230mm - Weight (including batteries) 980 - Automatic active temperature stabilization system of camera yes - Provision for through- the-lens direct temperature measurement capability yes - TEST REPORT DETAILS & TESTS The equipment supplied with calibration certificate yes - conformity to Dry Heat for 16 hrs at a maximum temp in accordance with IS:900 0/part-3/section-5/1977 true - 3/5 latest conformity to Cold Test for 4 hrs at a minimum temp in accordance with IS:9000/part-2/sec tion-4/1977 latest true - conformity to Damp Heat (Cyclic)Test for 2 Cycles of 24 h each at a temp of 40 degree C & 95% RH true - Availability of the test report from Central Govt/NABL/ILAC accredited lab to prove conformity to the specification true - Test Report Number and date for the specification test (not a part of biddable parameter) - - Name and address of the Lab for the specification test (not a part of biddable parameter) - - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 uma shanker shrivastava 325220, ADMN. BUILDING, SHAKTI PARISAR, CTPP, MOTIPURA, TELSIL- CHHABRA, DISTT. BARAN, RAJASTHAN-325220 1 20 EMD Required No ePBG Required No

bathing soap Bathing Soap ( 400 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 13498:Latest Yes - BIS Marking false CML Number 180010 - Test Report Details Availability of Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification Yes Yes, No Test Report Number 1023 - Test Report Date JUL 2015 - Name of the Lab NABL - Must declare (Write NA in case of NO against availability of Test Report) DEL - Colour and Fragrance Colour red - Fragrance soap - Weight Weight of Soap (Gms) 100 100.0 1/2 Packing Packing Material PLASTIC WRAPER Number of Soaps in a Pack (Nos) 4 4 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 uma shanker shrivastava 325220, ADMN. BUILDING, SHAKTI PARISAR, CTPP, MOTIPURA, TELSIL- CHHABRA, DISTT. BARAN, RAJASTHAN-325220 400 15 EMD Required No ePBG Required No

Air Freshener

hopper or tipper Average Turn Over of Last 3 Years 100 Lakh (s) Experience with Gov. Required 5 Year (s) Hopper Or Tipper ( 8 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Box body Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, - Main Engine Capacity (cc) 702 - Make of Chassis - - Type of Chassis Frame - - Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) 1/6 Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 21.5 Speed, Max (Km/Hr) 60 - Main Engine Aspiration Turbocharged Intercooled Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 30 Gradeability of Vehicle with load( %) 16 - Gradeability of Vehicle without load ( %) 18 - Ground Clearance (mm) 160 Wheel Base (mm) 2100 - Kerb Weight (Kg) 720 Gross Vehicle Weight (Kg) 1700 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - - Type of Front Axle and Suspension System - - Type of Rear Axle and Suspension System - - Type of BIS MARKED Vehicle Tyre Radial - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 4 - Type of Steering Manual Manual, Power Operated Turning Radius, Min (mm) 4300 Speed Governers yes - 2/6 ABS Fitted No - Front Vehicle Brake - - Rear Vehicle Brake - - Type of Clutch - - Tipping Angle (Degree) 82 Tipper Container cap acity/Volume(cubic metres) 2 Certification Chassis Certification ARAI/VRDE/ICAT No. - - Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 12 - No. Of Free Service (Nos) 3 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 2170 - Width of Chassis (mm) 1550 - Height of Chassis (mm) 690 - Size Of Front Tyres (mm) - - Size Of Rear Tyres (mm) - - Size of Wheel (mm) 12 Overall Height of Tipper from Ground (mm) 1801 - Body Plate Thickness (mm) 2 Main Frame Thickness (mm) 2 Pneumatic System false - Hydarulic System true - Tipping Hydraulic Cylinders(Make) - - Hydraulic System Driven by Main Engine - Auxiliary Diesel Engine for Hydraulic and false - 3/6 Pneumatic Operation Auxiliary Diesel Engine Transmission - - Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Dumping Height (mm) 551 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pramod Purnaji Kharate 444905, Municipal Council Morshi, Gujari Bazar Morshi, 8 30 4/6

Printer

hopper or tipper Average Turn Over of Last 3 Years 500 Lakh (s) Experience with Gov. Required 5 Year (s) Hopper Or Tipper ( 3 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, Box type covered Tipper - Main Engine Capacity (cc) 720 Make of Chassis TATA Motors Type of Chassis Frame LEDDAR TYPE FREAM WITH HOT SECTION LONG MEMBER Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG 1/6 Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 70 Speed, Max (Km/Hr) 70 - Main Engine Power BHP@rpm (BHP@rpm) 16 BHP @ 3200 rpm - Engine Torque Max, @ rpm (N- M@rpm) 3200 Main Engine Aspiration Turbocharged Intercooled Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 30 Gradeability of Vehicle with load( %) 12 - Gradeability of Vehicle without load ( %) 21 - Ground Clearance (mm) 2200 Wheel Base (mm) 2100 - Kerb Weight (Kg) 840 Gross Vehicle Weight (Kg) 1550 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) 5 - Type of Front Axle and Suspension System Parabolic Lif Spring Rigid Axle - Type of Rear Axle and Suspension System Parabolic Lif Spring Rigid Axle - Type of BIS MARKED Vehicle Tyre Radial - Chassis Transmission System Manual Automatic, Manual 2/6 Number of Speed Forward Gears 5 - Type of Steering Manual Manual, Power Operated Turning Radius, Min (mm) 8.6 Speed Governers yes - ABS Fitted No - Front Vehicle Brake Disk Brake - Rear Vehicle Brake Drum Type of Clutch Single Plate Dryfriction - Tipping Angle (Degree) 70 Tipper Container cap acity/Volume(cubic metres) 1.8 Certification Chassis Certification ARAI/VRDE/ICAT No. ARAI/CMR/VR/11883 Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 12 - No. Of Free Service (Nos) 3 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3800 - Width of Chassis (mm) 1500 - Height of Chassis (mm) 1845 - Size Of Front Tyres (mm) 1300 - Size Of Rear Tyres (mm) 1320 - Size of Wheel (mm) 155 Tipper body Pivot length (mm) 2475 - Tipper body Length (mm) 2500 - Tipper Body Height (mm) 1550 - Overall Height of Tipper 2041 - 3/6 from Ground (mm) Body Plate Thickness (mm) 1.6 Main Frame Thickness (mm) 3 Pneumatic System false - Hydarulic System true - Tipping Hydraulic Cylinders(Make) Marshal/Canara - Hydraulic System Driven by Main Engine - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - If Yes Auxiliary Diesel Power (HP@rpm) No Auxiliary Diesel Engine Transmission Not Applicable Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 1.6 Dumping Height (mm) 1400 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Yes - 4/6 Container Counter Weight true - If yes Counter Weight (kg) 850 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mohammad Makhdum Urf Zaker Mohammad Shabbir 431702, Nagarparishad Kalamnuri Tq.Kalamnuri Dist.Hingoli 3 15 EMD Required No ePBG Required No

Smart Phone with MDM/EMM/SDK Average Turn Over of Last 3 Years 47 Lakh (s) Experience with Gov. Required 3 Year (s) Smart Phone With MDM/EMM/SDK ( 193 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Technology GSM - Processor core Quad core Hexa core, Quad core Processor speed (GHz) Minimum 2.2 GHz 1.5 GHz, 1.6 GHz, 2.0 GHz, 2.2 GHz, 2.5 GHz Operating system Android 8.x Oreo GMS certified Android 8.x Oreo GMS certified, Android 7.x Neuget GMS certified Chipset Qualcomm/Mediatek Apple/Exynos Snapdragon Spreadtrum - Operating System auto upgradable to next level Yes Yes, No MEMORY RAM Size (in GB) 3 3 Internal Storage (in GB) 16 16, 32 Storage Expandable up to (in GB) 256 256, 128 DISPLAY Display size (in inch) 5.5 5.0, 5.5 Display type LCD Touch Screen - 1/7 LED Backlit Touch Screen/Amoled Touch Screen/Retina/Retina HD/IPS Touch/Super Amoled Touch Screen Display Resolution (Horizontal x Vertical) (Pixel) FHD (Minimum 1920 x 1080) - Display Resolution @ Pixel Density 400 or higher 230 or higher, 260 or higher, 300 or higher, 350 or higher, 400 or higher, above 450 Aspect ratio 16:9 16:9, 4:3 Sun light readability (Nits) > 350 </= 400 > 400, > 350 </= 400, > 300 </= 350 Display protection Ion - Strengthened Glass, Corning Gorilla Glass 3 or equivalent, Corning Gorilla Glass 4 or equivalent, Corning Gorilla Glass 5 or equivalent, Ion - Strengthened Glass, FEATURES Response time of touch screen (in milli seconds) </= 35 milli second </= 35 milli second, > 35 </= 45 milli second Life of touch screen Minimum 10 lakhs touches Yes - Touch support Multi touch Single touch, Multi touch Rear Camera Resolution (Mega Pixel) >/=12 >/=5, >/=8, >/=16, >/= 12 Front Camera Resolution (Mega Pixels) 13 2, 5, 8, 12, 13, 16, 20, 24 SIM Card Slots Dual (SIM+SIM +Memory card slot) Single, Dual (SIM+SIM/Memory card), Dual (SIM+SIM +Memory card slot) Type of SIM Nano Standard, Mini, Micro, Na no SAR Value (Watt/Kg) < 1.6 Watt/Kg - Unicode support for Indian Regional languages Yes - OTG support Yes with cable Yes with cable Sensors Accelerometer - 2/7 Smart Phone shall support and installation of all kind of application software developed by Government of India Yes - CONNECTIVITY Connectivity 4G VoLTE 4G VoLTE, 4G LTE, 4G Wi-fi Connectivity 802.11b/g/n 802.11a/b/g/n, 802.11b g/n Bluetooth Connectivity 4.1 or higher 4.0 or higher, 4.1 or higher, 4.2 or higher GPS GPS with AGPS - BATTERY Battery Capacity (mAH) Minimum 4000 3000, 3200, 4000, 5000 Type of Battery Lithium-ion/Lithium Polymer/Nickel Cadmium (NiCd) - Battery removable Yes Yes Weight (With Battery) (grams) </=160 grams - ACCESSORIES Accessories: One wall charger with USB/Data transfer cable Yes Yes, No Accessories: One ear phone Yes Yes, No Accessories: Mobile cover No Flip cover, Back cover, No Accessories: Tempered glass No Yes, No Accessories: Carry pouch No Yes, No CERTIFICATIONS BIS Registration conforming to IS:13252 Part 1 with latest revision yES - BIS Registration Number 41063452 - OEM warranty for smart phone 1 Year 1 Year OEM warranty for battery 6 Months 1 Year, 2 Years, 6 Months Availability of service centers all over India Yes - Identification of Government Customers at Service Centres Yes - 3/7 through IMEI numbers and no need to carry physical copy of bill Warranty service Carry-in - CE certification Yes - CB/UL certification Yes - FCC certification Yes - ROHS certification Yes - Packing shall be sufficient to withstand without limitations rough handling during transit and exposure to extreme temperatures and precipitation during transit and open storage Yes - Packing must have user manual in Hindi and Englsh Do's and Dont's instructions Warranty card having Serial number IMEI number Month and Year of manufacturing Name and address and Telephone number of service centres Yes - Manufacturing date should not be older than 6 months from supply date Yes - Country of origin India - Mobile Device Management (MDM)/Enterprise Mobility Management (EMM) The tool to manage devices data security push device policies push custom apps reports management of applications and devices for example white list or blacklist applications URLs control device functionality as camera Bluetooth WIFI geo location of device etc Yes - Admin portal to manage smart mobile phones remotely to enroll un enroll deploy and configure all mobile devices Yes - 4/7 applications and security policies User specific application restrictions and remote actions like device lock or remot wipe Yes - Features such as Device access password inactivity timeout storage encryption device lockout on failed login attempts secure deletion of data through remote wipe on device theft/loss etc Yes - Features to disable unn ecessary/unauthorized hardware components or interfaces such as camera Wifi Bluetooth GPS external storage like SD card etc Yes - Support encryption of data on the device any external storage and enable SIM card lock with PIN number Yes - Features to block the setting notification bar and application switch window Yes - Install or upgrade applications remotely Yes - Features to prevent user to change wallpapers set by department Yes - Default boot or start in a kiosk mode wherein only applications which are enabled will be visible to the user Yes - Mobiel Device Management Platform MDM or Enterprise Mobility Management EMM tool OEM supported - Provide mobile device management platform Yes - 5/7 (MDM)/Enterprise mobility management (EMM) tool Solution including functionality In case of 3rd Party mobile device management platform (MDM)/Enterprise mobility management (EMM) tool solution as per technical specification Yes - In case of 3rd party support the bidder is agreable to submit the Certificate from handheld/mobile device OEM, clearly stating the support of mobile device management platform (MDM)/Enterprise mobility management (EMM) tool software with details including version details and functionality as per technical specification Yes - SDK SPECIFICATION (SOFTWARE DEVELOPMENT KIT FOR INTEGRATION Creation of closed environment for enterprise work (Kiosk Mode) Yes - Features for white list and balck list desired application Yes - Features to set departmental wallpaper on phone and non-changeable by user Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 N.Sarkar 834002, Asst PMG, Jharkhand Circle, Ranchi 193 15 EMD Required No 6/7 ePBG Required No

TABLE FAN/WALL MOUNT FAN/CEILING MOUNT FAN TABLE FAN/WALL MOUNT FAN/CEILING MOUNT FAN ( 25 ) Technical Specifications Specification Specification Name Values Allowed Values TYPE/SIZE PERFORMANCE Type of Fan Mounting Bracket mounted fan for Wall mounting Table fan, Bracket mounted fan for Wall mounting, Bracket mounted fan for Ceiling mounting Method of Mounting on Fan Base Oscillating Rigid, Semi Regid, Oscillating, Doubl e Oscillating or Gyrostatic Type of Fan Motor Capacitor Type Capacitor Type, Non- Capacitor Type Fan Size 400 200, 250, 300, 400 Minimum Air Delivery (cubic meter/min) 65 for 400mm - Maximum Input Power for Capacitor type Fan (watt) 61 for 400mm - Maximum Input Power for Non - Capacitor type Fan (watt) 73 for 400mm - Ingress Protection for Fan Motor and Regulators IP 21 - CERTIFICATION Conformity to Indian Standard IS : 555 latest - 1/3 ISI marked No Yes, No Availability of the type test report from Central Govt/NABL ILAC acredited lab to prove compliance to specification true If Yes, Test Report to be furnished to Buyer on demand Yes - Test report number and Date - - Name and Address of Lab - - WARRANTY Warranty 1 1, 2, 3, 4, 5 GENERIC Motor Type AC - Type of Enclosure of motor and Regulator Ventilated - Class of Insulation for fan and regulator Class I - Rated Voltage 220V AC - Speed Control Mechanism Pull cord or string based control - RPM at Maximum Speed 1320 - Number of Blades 3 - Material of Blade ABS - Body Colour White - Blade Colour White - Fan Guard Yes - Fan Guard Material Powder coated metal wire - Number of Speed Steps 3 - Adjustable vertical tilt Yes - Angular movement 60 - Length of Cord with Suitable Plug top (inclusive in the scope of supply) 2 - Additional Features, if any Full Copper Motor, Rated Air Delivery 70 CMM, Silent Operation - List of Items and Quantity of each item included in the offer Motor body, Stand, Guard, Blade assy and Warranty card - 2/3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 A Ramasamy 370201, A O Building EDP Section, Finance Department, Gandhidham 25 30 EMD Required No ePBG Required No

hopper or tipper Hopper Or Tipper ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, Garbage Tipper - Main Engine Capacity (cc) 702 Make of Chassis Tata ACE Fully Company Built-Up Hopper Tipper Type of Chassis Frame Garbage Tipper Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) 1/6 Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 21.5 Speed, Max (Km/Hr) 60 - Main Engine Power BHP@rpm (BHP@rpm) 16 HP @ 3200 RPM - Engine Torque Max, @ rpm (N- M@rpm) 39 Nm @ 1800 - 2200 RPM Main Engine Aspiration Natural Aspiration Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 30 Gradeability of Vehicle with load( %) 16.38 - Gradeability of Vehicle without load ( %) 18 - Ground Clearance (mm) 160 Wheel Base (mm) 2100 - Kerb Weight (Kg) 720 Gross Vehicle Weight (Kg) 1700 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) 4x2 - Type of Front Axle and Suspension System Rigid Beam Axle With Parabolic Leaf Spring & 2 Nos. Double Acting Telescopic Hydraulic Shock Absorbers - Type of Rear Axle and Suspension System Banjo Type Live Axle With Parabolic Leaf Spring & 2 Nos. Double Acting Telescopic Hydraulic Shock Absorbers - Type of BIS MARKED Radial - 2/6 Vehicle Tyre Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 4 - Type of Steering Manual Manual, Power Operated Turning Radius, Min (mm) 4300 Speed Governers No - ABS Fitted No - Front Vehicle Brake Disc Brake Hydraulic, Dual Circuit Diagonal Split with Tandem Master Cylinder acting on all wheels with Automatic Wear Adjusters - Rear Vehicle Brake Drum Brake Hydraulic, Dual Circuit Diagonal Split with Tandem Master Cylinder acting on all wheels Type of Clutch 170mm Single Plate Dry Friction Diaphragm Type - Tipping Angle (Degree) 85 Tipper Container cap acity/Volume(cubic metres) 2.5 Certification Chassis Certification ARAI/VRDE/ICAT No. AAHN0151F03 Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 24 - No. Of Free Service (Nos) 3 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3800 - Width of Chassis (mm) 1500 - 3/6 Height of Chassis (mm) 1845 - Size Of Front Tyres (mm) 145 R 12 - 8PR - Size Of Rear Tyres (mm) 145 R 12 - 8PR - Size of Wheel (mm) 304.8 Tipper body Pivot length (mm) 0 - Tipper body Length (mm) 2240 - Tipper Body Height (mm) 735 - Overall Height of Tipper from Ground (mm) 1518 - Body Plate Thickness (mm) 2 Main Frame Thickness (mm) 3 Pneumatic System false - Hydarulic System true - Tipping Hydraulic Cylinders(Make) Wipro or equivalent Reputed Make - Hydraulic System Driven by Main Engine - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - If Yes Auxiliary Diesel Power (HP@rpm) 0 Auxiliary Diesel Engine Transmission 0 Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Dumping Height (mm) 1012 4/6 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Anand Prabhakar Aouti 423104, Main road Near railway station 1 15 EMD Required No ePBG Required No

Desktops

hopper or tipper Hopper Or Tipper ( 16 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, Garbage Tipper - Main Engine Capacity (cc) 700 Make of Chassis Tata ACE Fully Company Built-Up Tipper tata Type of Chassis Frame Ladder Type Frame with Inverted Hat Section Long Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission bs iv bs iv, BS-III (only for 1/6 Complaince Defence) Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 21.5 Speed, Max (Km/Hr) 60 - Main Engine Power BHP@rpm (BHP@rpm) 16 HP @ 3200 RPM - Engine Torque Max, @ rpm (N- M@rpm) 38NM@2000RPM Main Engine Aspiration Natural Aspiration Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 30 Gradeability of Vehicle with load( %) 18 - Gradeability of Vehicle without load ( %) 22 - Ground Clearance (mm) 160 Wheel Base (mm) 2100 - Kerb Weight (Kg) 720 Gross Vehicle Weight (Kg) 1700 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) 4 * 2 - Type of Front Axle and Suspension System Rigid Beam Axle With Parabolic Leaf Spring & 2 Nos. Double Acting Telescopic Hydraulic Shock Absorbers - Type of Rear Axle and Suspension System Banjo Type Live Axle With Parabolic Leaf Spring & 2 Nos. Double Acting Telescopic Hydraulic Shock Absorbers - 2/6 Type of BIS MARKED Vehicle Tyre Radial - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 4 - Type of Steering Manual Manual, Power Operated Turning Radius, Min (mm) 4300 Speed Governers No - ABS Fitted No - Front Vehicle Brake Disc Brake Hydraulic, Dual Circuit Diagonal Split with Tandem Master Cylinder acting on all wheels with Automatic Wear Adjusters - Rear Vehicle Brake Drum Brake Hydraulic, Dual Circuit Diagonal Split with Tandem Master Cylinder acting on all wheels Type of Clutch 170mm Single Plate Dry Friction Diaphragm Type - Tipping Angle (Degree) 89 Tipper Container cap acity/Volume(cubic metres) 2 Certification Chassis Certification ARAI/VRDE/ICAT No. AAHN0151F03 Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 24 - No. Of Free Service (Nos) 3 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3800 - Width of Chassis (mm) 1500 - 3/6 Height of Chassis (mm) 1845 - Size Of Front Tyres (mm) 145 R 12 - 8PR - Size Of Rear Tyres (mm) 145 R 12 - 8PR - Size of Wheel (mm) 12 Tipper body Pivot length (mm) 0 - Tipper body Length (mm) 2240 - Tipper Body Height (mm) 735 - Overall Height of Tipper from Ground (mm) 1518 - Body Plate Thickness (mm) 2 Main Frame Thickness (mm) 3 Pneumatic System false - Hydarulic System true - Tipping Hydraulic Cylinders(Make) Wipro or equivalent Reputed Make - Hydraulic System Driven by Main Engine - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - If Yes Auxiliary Diesel Power (HP@rpm) 0 Auxiliary Diesel Engine Transmission 0 Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Dumping Height (mm) 1012 4/6 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ganesh Ramdas Kakade 415523, Ravivar Peth Ambedkar Chowk Tal Phaltan Dist Satara 16 15 EMD Required No ePBG Required No

diesel generators- DG Sets Average Turn Over of Last 3 Years 30 Lakh (s) Experience with Gov. Required 2 Year (s) Diesel Generators- DG Sets ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values OUTPUT CAPACITY RATING/PHASE Nominal Rated Capacity (KVA) 50 50 No of Phase - Three Phase ENGINE Make of Engine - - Model Number of Engine - - Capacity of Engine (cc) - - Engine Power (kWm) - - ISI Marking to IS :10001 for engine true - BIS license No, if applicable - - Type of Engine cooling Liquid Cooled Liquid Cooled Type of governer Mechanical Mechanical Class of governer A1 A1 Number of cylinders (nos) 4 - No of Strokes (nos) 4 - 1/4 Rated RPM of Engine (RPM) - 1500 Overload capacity for one hour for every 11 hours continuous running at full load (%) 10 - Specific Fuel Consumption (gm/kWh) - - Starting voltage (volt) 12 - ALTERNATOR AC GENERATOR(ALTER NATOR) Make - - AC GENERATOR(ALTER NATOR) model Number - - Rating of AC Generator (KVA) 50 - Power Factor of AC generator 0.8 - Efficiency at rated Power factor at 75% of full Load 91.76 - Compliance of Alternator to IS:13364(part-1) Yes - Type of alternator Brushless - Voltage Regulation Grade VG 3 - Alternator IP Rating IP 23 - Class of Insulation H - CONTROL PANEL Control Panel AMF AMF IP Rating of Control Panel IP 53 - ACOUSTIC ENCLOSURE Sheet Thickness 1.6 1.6, 1.8, 2, 1.2 Thickness of Foam 25 - Density of Foam for sound insulation 28 - Noise level at 1 meter (dB) 75 - BATTERY Battery Type & Specification Normal lead acid to IS: 7372 for motor vehicles - Battery capacity (Ah) - - No of batteries 1 - TEST REPORTS Availability of Type test report for Engine from Central govt/NABL/ILAC accredited laboratory Yes - 2/4 Test Report number and date(Engine) - - Name and address of laboratory(Engine) - - Availability of Type test report for Alternator from Central government/NABL/ILAC accredited laboratory Yes - Test Report number and date(Alternator) - - Name and address of laboratory(Alternator) - - DG set meet requirements of Enviro nmental(Protection) Rules 1986, in respect of noise and emission norms, as described in STC Yes - WARRANTY INSTALLATION & COMMISSIONING Warranty 2 2.0 Installation & Commissioning With Installation With Installation, Without Installation Agreed to STC of the Product Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 uma shanker shrivastava 325220, ADMN. BUILDING, SHAKTI PARISAR, CTPP, MOTIPURA, TELSIL- CHHABRA, DISTT. BARAN, RAJASTHAN-325220 2 40

maplitho paper Maplitho Paper ( 2000000 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conformity to Indian Standard IS 1848:Latest for Maplitho Paper Yes - ISI Marked Yes - CM/L Number and Date CM/L 2837469 valid upto DTD 29/12/2018 - Test Report Details Water Marking/Security fibre on Maplitho paper Manufacturer as well as DDO mark Manufacturer as well as DDO mark Test method as per IS: 1060 Yes - Availability of Type Test Report covering complete test parameters as per IS:1848 latest from any ILAC/NABL accredited/Central Gov. LAB. Yes - Test certificate Number IIP/1364/2014/LAB/M-1 1 - Test Report Date 05/03/2014 - Name and Address of IIP MUMBAI - 1/4 the Lab where test Conducted Material Material used (if ECO marked as per clause 4.8.2 of IS: 1848 latest) ECO MARK AS PER CL 4.8.2 - Size and Dimension GSM of Paper 80 80 Width of sheet (mm) 585 585 Width of Reel (mm) NA 430, 610, 710, 740, 840, 8 60, 910, NA Length of sheet (mm) 910 910 Physical Properties Brightness (%) 80 80 Tear Index MD (Nm.m^2/g) 3.5 3.5 Tear Index CD (Nm.m^2/g) 4 4 Tensile Index MD (Nm/g) 30 30 Tensile Index CD (Nm/g) 20 20 Surface pH 5 - Double fold MD (Nm/g) 15 15 Double fold CD (Nm/g) 10 10 Opacity (%) 80 80 Smoothness (Bendtsen) (ml/min) 280 280 Cobb test (one minute) (g/m^2) 25 25 Wax Pick 10A - Packing Packing of maplitho paper as per IS: 6211 latest as per IS: 6211 latest - Packing In SHEET - Weight Net Weight of Paper (without weight of wrapping paper in Kg as Accounting Unit) in Reel/sheets as per relevant clause of IS:1848 21.021 - Net weight (without weight of core pipe and plugs, wrapping/packing as per IS1848 cl 4.2.2 - 2/4 paper in Kg as accounting unit) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sh. Manoj Jain 110007, NIOS C/o CWC Godown, Near Nanak Piao, Rana Pratap Bagh, Delhi - 110007 850000 45 2 Sh. Manoj Jain 110007, Delhi - 110007 1150000 90

maplitho paper Maplitho Paper ( 2700000 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conformity to Indian Standard IS 1848:Latest for Maplitho Paper Yes - ISI Marked Yes - CM/L Number and Date CM/L 2837469 valid upto DTD 29/12/2018 - Test Report Details Water Marking/Security fibre on Maplitho paper Manufacturer as well as DDO mark Manufacturer as well as DDO mark Test method as per IS: 1060 Yes - Availability of Type Test Report covering complete test parameters as per IS:1848 latest from any ILAC/NABL accredited/Central Gov. LAB. Yes - Test certificate Number IIP/1364/2014/LAB/M-1 1 - Test Report Date 05/03/2014 - Name and Address of IIP MUMBAI - 1/4 the Lab where test Conducted Material Material used (if ECO marked as per clause 4.8.2 of IS: 1848 latest) ECO MARK AS PER CL 4.8.2 - Size and Dimension GSM of Paper 70 70 Width of sheet (mm) 585 585 Width of Reel (mm) NA 430, 610, 710, 740, 840, 8 60, 910, NA Length of sheet (mm) 910 910 Physical Properties Brightness (%) 80 80 Tear Index MD (Nm.m^2/g) 3.5 3.5 Tear Index CD (Nm.m^2/g) 4 4 Tensile Index MD (Nm/g) 30 30 Tensile Index CD (Nm/g) 20 20 Surface pH 5 - Double fold MD (Nm/g) 15 15 Double fold CD (Nm/g) 10 10 Opacity (%) 80 80 Smoothness (Bendtsen) (ml/min) 280 280 Cobb test (one minute) (g/m^2) 25 25 Wax Pick 10A - Packing Packing of maplitho paper as per IS: 6211 latest as per IS: 6211 latest - Packing In SHEET - Weight Net Weight of Paper (without weight of wrapping paper in Kg as Accounting Unit) in Reel/sheets as per relevant clause of IS:1848 18.473 - Net weight (without weight of core pipe and plugs, wrapping/packing as per IS1848 cl 4.2.2 - 2/4 paper in Kg as accounting unit) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sh. Manoj Jain 110007, NIOS C/o CWC Godown, Near Nanak Piao, Rana Pratap Bagh, Delhi - 110007 1500000 45 2 Sh. Manoj Jain 110007, Delhi - 110007 1200000 90

Desktops