Buyer Organistion Tender Results

Notebook Computers-laptop

Professional Large Format Display

Desktops

Online UPS Online UPS ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Rating in KVA (KVA) 1.0 KVA As per GeM Catalogue. Technology IGBT-PWM without inbuilt isolation transformer MOSFET-PWM with inbuilt isolation transformer, IGBT-PWM with inbuilt isolation transformer, IGBT-PWM without inbuilt isolation transformer Input Power single phase 160V - 260V sinewave, 50Hz single phase 160V - 260V sinewave, 50Hz, Three phase 300 V - 450V sinewave, 50Hz Output power Single phase 230V +/-1% sinewave 50 Hz Single phase 230V +/-1% sinewave 50 Hz, 3 Phase 400V +/-1% with alternative user setable setting of 380V +/-1% 50 Hz Backup time (Minutes) 30 15, 30, 60, 90, 120, 180, 2 40 Minimum VAH (VAH) 1000 Warranty for UPS (Years) 1 1, 2, 3, 4, 5 Movable trolly for Batteries Without With, Without, Without trollery but with rack 1/4 Warranty for battery 1 1, 2 Degree of Protection IP21 IP21, IP20 Cabling 5 meters for input and out put Without With, Without Paralleling kit for synchronising Without With, Without Installation and Commissioning Yes - CONSTRUCTIONAL Minimum thickness of M.S.Sheet Enclosure duly painted (mm) 1.2 - Type of Battery SMF-VRLA conforming to JISC:8702(Pt.I, II&III) - FUNCTIONAL Maximum overshoot and Under shoot of output rated voltage 4 - Voltage Regulation from no load to full load (%) </= 3% - 20% Overload limit for minimum 10 minutes Yes - Overall Efficiency (%) >/=90% - Total Harmonic Distortion(THD) (%) Maximum 3% - 50% Overload limit for minimum 1 minutes Yes - PROTECTION Protection for under voltage at battery terminal at 10.5V per 12 V battery. Yes - Protection of Over voltage, Short Circuit & over load at UPS output terminal Yes - METERING AND INDICATIONS Digital Metering in UPS for AC Input Voltage, Output AC Volt age, Current, Frequency, Battery Voltage and Current Yes - Indicators for mains presence, Battery charging and discharging, Output Over Load, Low Battery Voltage Yes - REPORTS AND CERTIFICATION Damp Heat : in accordance with Yes - 2/4 IS:9000(part 5/sec.2)1981 at Temperature of 40 degree C, two cycles of (12+12) hours each 2007) Dry Heat Test : in accordance with IS:9000 (part 3/sec.5)1977 (reaffirmed 2007) at 55 degree C for 16 hrs Yes - Cold Test : in accordance with IS:9000 (Part 2/Sec.4)1977 (Reaffirmed 2007) at -10 degree C for 4 hrs. Yes - Availability of the Type Test Report from Central Govt. NABL/ILAC Accredited lab covering all technical requirements. Yes - Type Test Certificate No. 4465 - Type Test Certificate date 27/02/2014 - Name of Lab MICROTEK INTERNATINAL PVT LTD - Address of Lab MICROTEK, ROHTAK ROAD, NEW DELHI - As per Meity (Government of India) guidelines UPS shall have valid BIS CRS certifications as applicable Not applicable presently - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Anshuman Das 181202, OFFICE OF COMMANDANT, 49 ARMD REGT, JAURIAN, NEAR AKHNOOR, JAMMU AND KASHMIR 10 15

Air Conditioner Air Conditioner ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values CAPACITY/GENERIC Type of Air conditioner Ceiling Mounted Split AC (Cassette AC) Ceiling Mounted Split AC (Cassette AC) Technology of AC Non- Inverter (Fixed Speed) Non- Inverter (Fixed Speed) Nominal cooling capacity in Ton (kcal/hr) 2.0 Ton/6000 kcal/hr 2.0 Ton/6000 kcal/hr Coil Material Copper Copper Eco-friendly refrigerant true true Minimum length of copper pipe and suitable connecting electrical cable for installation and commissioning NA' for Window AC Casstte AC/Floor Standing Split AC - Packing LIst INCLUDED - Any other Features NIL - CONFORMITY CERTIFICATION BEE Star Rating NA 1, 2, 3, 4, 5, NA Conformity to Indian Standard IS 1391 latest - WARRANTY Warranty on Machine 1 1.0 1/3 Warranty on Compressor 5 5.0 INSTALLATION Installation and commissioning With Installation and Commissioning With Installation and Commissioning * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramswaroop Rawat 462003, MP FISH FEDERATION, BHADBHADA FISH FARM BHADBHADA ROAD BHOPAL 1 15 EMD Required No ePBG Required No

Air Conditioner

All in one Experience with Gov. Required 1 Year (s) All In One ( 7 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel - Processor Generation 7th 7th Processor Intel Core i5-7500T (2.7 GHz, 6 MB Cache, 4 Cores) Intel Core i5-7500T (2.7 GHz, 4 Cores) Chipset Chipset Intel H110 - Graphics Graphics type Integrated - Graphic Card Description Intel® HD Graphics 630 - Storage Type of Hard disk drive SATA SATA Hard Disk Drive Size (GB) 1000 1000 Hard disk drive speed (RPM) 7200 - RAM Type of RAM DDR4 - RAM Size (GB) 8 8 RAM Expandability Upto (GB) 32 8, 16, 32, Not-Available Ram speed (MHz) 2400 - 1/3 Operating System Operating system Windows 10 Professional Windows 10 Professional OS Certification Windows - Display Display Size (Inch) 20 20 Type of Display Non Touch Non Touch display resolution (Pixels) 1600 x 900 1920 x 1080, 3200 x 1800, 1920 x 1080 with IPS Technology, Retina 4K Display (4096 x 2304) with IPS Technology, Retina 5K Display (5120 x 2880) with IPS Technology, 1600 x 900 TCO Certification Yes - Ports USB Port 2.0 (No.) 2 - USB Port 3.0 (No.) 4 - VGA Port Not-Available - HDMI Port Not-Available - Thunderbolt Port (No.) Not-Available - Display Port Available - Input Devices Keyboard Standard with USB Interface - Mouse Optical Scroll with USB Interface - Audio Integrated Stereo Sound with internal speakers & Mic. - Connectivity Wi-fi Connectivity 802.11 ac - Bluetooth Connectivity 4.0 or higher - LAN Port Integrated Gigabit Ethernet 10/100/1000 - Certification BIS Registration under CRS of Meity Yes - BIS Registration no - - Certifications Available Energy Star - ROHS Compliance Yes - Power Maximum Wattage (Watts) 120 - Power Efficiency (%) Minimum 80 - Others Webcam Full HD - DVD R/W Available - Optical drive Integrated - 2/3 Stand Standard - On Site OEM Warranty (Year) 3 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rekha Ranawat 307001, Govt, girls College, SIROHI, RAJASTHAN, 307001 7 15

Air Conditioner

Printer

Steel Filing Cabinets

Notebook Computers-laptop

hopper or tipper Hopper Or Tipper ( 7 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, Garbage Tipper - Main Engine Capacity (cc) 702 Make of Chassis Tata ACE Fully Company Built-Up Box Tipper Type of Chassis Frame Ladder Type Frame With Inverted Hat Section Long Members Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission bs iv bs iv, BS-III (only for 1/6 Complaince Defence) Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 21.5 Speed, Max (Km/Hr) 60 - Main Engine Power BHP@rpm (BHP@rpm) 16 HP @ 3200 RPM - Engine Torque Max, @ rpm (N- M@rpm) 39 NM @ 1800 - 2200 Main Engine Aspiration Natural Aspiration Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 30 Gradeability of Vehicle with load( %) 16.38 - Gradeability of Vehicle without load ( %) 18 - Ground Clearance (mm) 160 Wheel Base (mm) 2100 - Kerb Weight (Kg) 720 Gross Vehicle Weight (Kg) 1700 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) 4x2 - Type of Front Axle and Suspension System Rigid Beam Axle With Parabolic Leaf Spring & 2 Nos. Double Acting Telescopic Hydraulic Shock Absorbers - Type of Rear Axle and Suspension System Banjo Type Live Axle With Parabolic Leaf Spring & 2 Nos. Double Acting Telescopic Hydraulic Shock Absorbers - 2/6 Type of BIS MARKED Vehicle Tyre Radial - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 4 - Type of Steering Manual Manual, Power Operated Turning Radius, Min (mm) 4300 Speed Governers No - ABS Fitted No - Front Vehicle Brake Disc Brake Hydraulic, Dual Circuit Diagonal Split With Tandem Master Cylinder Acting On All Wheels With Automatic Wear Adjusters - Rear Vehicle Brake Drum Brake Hydraulic, Dual Circuit Diagonal Split With Tandem Master Cylinder Acting On All Wheels Type of Clutch Drum Brake Hydraulic, Dual Circuit Diagonal Split With Tandem Master Cylinder Acting On All Wheels - Tipping Angle (Degree) 48 Tipper Container cap acity/Volume(cubic metres) 2 Certification Chassis Certification ARAI/VRDE/ICAT No. AAHN0151F03 Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 12 - No. Of Free Service (Nos) 3 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes 3/6 Consructional Parameters Length of Chassis (mm) 3800 - Width of Chassis (mm) 1500 - Height of Chassis (mm) 1845 - Size Of Front Tyres (mm) 145 R 12 - 8PR - Size Of Rear Tyres (mm) 145 R 12 - 8PR - Size of Wheel (mm) 12 Tipper body Pivot length (mm) 1546 - Tipper body Length (mm) 2165 - Tipper Body Height (mm) 670 - Overall Height of Tipper from Ground (mm) 1489 - Body Plate Thickness (mm) 2 Main Frame Thickness (mm) 4 Pneumatic System false - Hydarulic System true - Tipping Hydraulic Cylinders(Make) Wipro Or Equivalent Reputed Make - Hydraulic System Driven by Main Engine - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - If Yes Auxiliary Diesel Power (HP@rpm) 0 Auxiliary Diesel Engine Transmission 0 Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made 2 4/6 (mm) Dumping Height (mm) 352 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pawar Babasaheb Bhoju 413305, Mangalwedha Municipal Council Mangalwedha 7 15 EMD Advisory Bank HDFC Bank EMD Percentage(%) 2.00 EMD Amount 64747 ePBG Required No

Desktops

Printer

scanners

aadhaar enrolment kit Experience with Gov. Required 1 Year (s) Aadhaar Enrolment Kit ( 15 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Aadhar Enrollment Kit It consists of set of hardware Devices required to carry out successful Aadhar enrolment & update.Set comprises of :Computer, Monitor, Multifunction Printer, IRIS Scanner, Camera, Slap Scanner, GPS device, White Light, Focus Light, Surge Protector Sppike, Computer Computer OEM Brand - from Top 5 vendors as per latest IDC report OEM Brand - from Top 5 vendors as per latest IDC report Form Factor Laptop Laptop CPU 2 GHz Dual Core or higher - Display Minimum 14" HD Anti- Glare (16:9) - Connectivity Should have built-in support for Bluetooth 4.0, Wi-Fi (IEEE) - 1/9 802.11b/g/n) and Ethernet (10/1000 Base- T) Memory 4-GB DDR3 or higher, SDRAM @1066MHZ expandable up to 8-GB with 1DIMM Slot Free - Webcam Built-in webcam with minimum High Definition 720p - HDD Minimum 500GB (or Higher) - Input/Output Ports two VGA Ports One HDMI, One VGA, One Ethernet (RJ-45), Dedicated Minimum 5 USB 2.0 port ( In case the laptop has less than 5 USB 2.0 ports, then a USB Hub with multiple USBconnections (enabling 5 devices plug-in through USB port) should be provided at no extra cost) - Chipset Integrated with CPU or equivalent - Graphics Integrated Graphics - Power Source 4 Cell or 6 Cell Lithium Ion - Keyboard Full Sized (Minimum 84 Keys) Windows compatible Spill- resistant keyboard - Touchpad Wide Touchpad below keyboard - Preloaded OS Windows 10 professional - In Built Microphone in case of Laptop At least one built in Mic - Carry Case for Laptop Yes - Anti Virus For End Point Security - Monitor Monitor Among the “Leaders” Quadrant in the India region in any of the previous two Quarters as published in IDC Gartner/Frost and Sullivan report for the Among the “Leaders” Quadrant in the India region in any of the previous two Quarters as published in IDC Gartner/Frost and Sullivan report for the 2/9 PC/Laptop/Monitors PC/Laptop/Monitors Type LCD - Size 15-16 inch or higher - Resolution (Pixel) 1024 x 768 or above - Multi Function Device Multi Functional Device (MFD) From Top 5 vendors as per latest IDC report From Top 5 vendors as per latest IDC report Function Print, Copy, Scan - Duty Cycle (Pages) 8000 - Print Speed– Black (A4) (PPM) 18 or more - Print Resolution (DPI) 600 x 600 - Scan Resolution (Pixel) 600 x 600 Optical - Bit/Colour Depth (Bits) 24 - Copying Speed (CPM) 18 - Copy Resolution (DPI) 600 x 600 - Medium Used Ink Tank - Custom Media Size Upto Legal - Standard Operating System Supported Compatible with Windows 8, Windows 10 and earlier versions of Windows (XP, Vista) and Linux - IRIS Device IRIS Device Available Available Device Characteristics Hand-held (Operator operates and hold the camera and subject is stationary) - Mounting NA - Iris Diameter (mm) 211 - Spatial resolution @ 4 Lp/mm (%) 61 - Pixel Resolution (Pixels/mm) 17 - Number of simultaneous captured eyes (number) 2 - View finder, Capture Volume & Exposure Time External with Capture Distance >750mm, Capture volume (width/height/depth) > 250x500x500 mm and Exposure Time <15 ms - Imaging wavelength (nm) 700-900 - 3/9 Special Spread - Power in any 100nm band 36 - Scan type Progressive - Image margins -Left & right (mm) 0.50 x iris diameter - Image margins -Top & bottom (mm) 0.25 x iris diameter - Pixel Depth (bits/pixel) 9 - Image evaluation frame rate >5 frames/sec, continuous image capture - Capture mode Auto capture with built- in quality check (incorporates NIST quality considerations) - Sensor signal to noise ratio (dB) 37 - Connectivity (Total of only 1 USB port will be available for connectivity and power) USB, USB-IF certified or Networked (TCP/IP) - Operating System Compatibility Linux/Windows - Power USB or Independent Power Supply - Weight NA for Stationary and less than 1 kg for Hand Held - Dimensions (mm x mm x mm) Max. 300 x100 x300 - Operating temperature Range (Degree C) 0 - 49 - Operating Humidity (%RH) 10 – 90% non- condensing - Durability/Shock Resistant Yes - Degree of Protection (MInimum) IP 54 - Safety Standard FCC Class A, RoHS (Exempt Group per IEC 62471:2006-07) - Software API Compliant with latest UIDAI Device Capture Specifications Linux/Windows 64 bit VDM ready certified by UIDAI - 4/9 Availability of Device Certification from STQC Yes - STQC Certificate number - - STQC Certificate Date 25.08.2017 - Camera Camera Available Available Camera's Capture Type Plain live capture - Camera's Image Quality Full Frontal (0x01) as per ISO/IEC 19794-5 - Camera's Image Resolution (Pixels) 800 x 600 - Camera's Capture mode Manual Capture with Auto Focus, Auto Lighting Adjustment - Camera's Auto Lighting Adjustment Available - Camera's Native Sensor Resolution 2.1 - Camera Connectivity High Speed USB 2.0, USB-IF certified - Camera Lens Fixed, SLR - Camera Power Supply Through USB - Camera Mount Tripod - Camera's Operating Temperature Range ( Degree C ) 0 – 50 - Camera's Operating Humidity (%RH) 10 - 90 - Camera's Durability (Shock Resistant) Yes - Camera Safety Standard UL - Camera's Software API Compliant with UIDAI Device Capture API specification V1.0 RC 3 - Camera Operating System Compatibility Linux/Windows - Finger Print Device Finger Print Device Available Available Finger Print Device Capture Mode Plain live scan capture - Image acquisition Requirements Setting level 31 or higher - Finger Print Device Image evaluation frame rate >3 frames/sec - 5/9 Finger Print Device Capture Auto capture with built-0in quality check (incorporates NIST QUALITY CONSIDERATIONS) - Finger Print Device Capture Area (mm x mm) More than 76 x 80 - Finger Print Device Connectivity USB 2.0, USB-IF certified - Finger Print Device Power Through USB - Finger Print Device Dimension (W X H X D) (mm x mm x mm) 160 x 160 x 160 - Finger Print Device Weight (Kg) less than 2.5 Kg - Finger Print Device Operating Temperature Range (Degree C) 0 – 50 - Humidity (%RH) Non Condensing 10 - 90 - Finger Print Device Durability (Shock Resistant) Yes - Finger Print Device Ingress Protection Rating (Minimum) IP 54 - Finger Print Device, Availability of Device Certification from STQC Yes - Finger Print Device, STQC Certificate number - - Finger Print Device, STQC Certificate Date 20.04.2017 - Finger Print Device, Safety Standards UL certified (if applicable) - Finger Print Device, Software API Compliant with UIDAI Device Capture API specification V1.0 RC3 - Finger Print Device Operating System Compatibility Windows - White Screen White Screen Available Available White Screen Size 4 x 5 Feet - No Reflecting Yes - 6/9 Opaque Yes - White Screen Mounting Wall mountable - Focus Light Focus Light Available Available Focus Light Rating 60 W - Focus Light Accessories Stand, 2Mrts Wire and on/off Switch near the operator - Surge Protector Spike Surge Protector Spike Available Available General 6 nos. of 5A sockets (4 Indian style + 2 Style), Fuse, on/off Switch and ISO mark - GPS Device GPS Device Available UIDAI Certified Available UIDAI Certified Accessories With all necessary required cables and accessories to connect to PC/Laptop - Special Terms and Conditions for Aadhar Enrollment Kit STC 1 -:Installation & commissioning: Bidder shall provide Remote support Facility for installation of Aadhaar Enrollment Kit - STC 2 - Delivery Period: Bidder shall complete the entire delivery to consignee within 30 days from date of purchase order - STC 3 - Performance bank guarantee Bidder shall submit the PBG of 10% of the contract value to the purchaser within 10 days of purchase order - STC 4 - Payments 90% of the payment shall be made on supply of kit to consignee & submission of PBG and remaining 10% shall be paid after acceptance of the Aadhaar Enrolment Kit or 15 days, whichever is earlier - STC 5 - Warranty Warranty for the complete kit except white screen, Focus light & surge protector shall be 3 years - 7/9 STC 6 - SLA In case failing to replace/repair of faulty equipment’s within 7 days (equipment’s within warranty), Rs100 penalty per day per equipment till the replacement/repair shall be deducted from PBG - STC 7 - Aadhaar Enrolment Kit Aadhaar Enrolment Kit comprising of specific make/model of device shall be UIDAI certified for its working with latest UIDAI’s enrolment client (ECMP) - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 S Pajanivelou 605013, PHB Building Opp to LIC office New Saram 15 15 EMD Required No ePBG Required No

Air Conditioner

TABLE FAN/WALL MOUNT FAN/CEILING MOUNT FAN Average Turn Over of Last 3 Years 20 Lakh (s) Experience with Gov. Required 3 Year (s) TABLE FAN/WALL MOUNT FAN/CEILING MOUNT FAN ( 8 ) Technical Specifications Specification Specification Name Values Allowed Values TYPE/SIZE PERFORMANCE Type of Fan Mounting Bracket mounted fan for Wall mounting Bracket mounted fan for Wall mounting Method of Mounting on Fan Base Oscillating Rigid, Semi Regid, Oscillating, Doubl e Oscillating or Gyrostatic Type of Fan Motor Capacitor Type Capacitor Type, Non- Capacitor Type Fan Size 400 200, 250, 300, 400 Minimum Air Delivery (cubic meter/min) 65 for 400mm - Maximum Input Power for Capacitor type Fan (watt) 61 for 400mm - Maximum Input Power for Non - Capacitor type Fan (watt) 73 for 400mm - Ingress Protection for Fan Motor and Regulators IP 21 - CERTIFICATION Conformity to Indian Standard IS : 555 latest - 1/3 ISI marked No Yes, No Availability of the type test report from Central Govt/NABL ILAC acredited lab to prove compliance to specification false If Yes, Test Report to be furnished to Buyer on demand NA - Test report number and Date - - Name and Address of Lab - - WARRANTY Warranty 2 1, 2, 3, 4, 5 GENERIC Motor Type AC - Type of Enclosure of motor and Regulator Ventilated - Class of Insulation for fan and regulator Class II - Rated Voltage 240V AC - Speed Control Mechanism Rotary Switch - RPM at Maximum Speed 1300 - Number of Blades 3 - Material of Blade Polypropylene - Body Colour White - Blade Colour White - Fan Guard Yes - Fan Guard Material ABS - Number of Speed Steps 3 - Adjustable vertical tilt Yes - Angular movement 90 - Length of Cord with Suitable Plug top (inclusive in the scope of supply) 3 - Additional Features, if any N/A - List of Items and Quantity of each item included in the offer Motor, bracket, blades and guard - * Bold specifications are the golden parameters. 2/3 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Chandrasekaran M 602105, PENNALUR, SRIPERUMBUDUR 8 15 EMD Required No ePBG Required No

Ceiling Fan

Body Worn Camera System

video conferencing end point full high definition for groups, camera for video conferencing system Video Conferencing End Point Full High Definition For Groups ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Type of End Point Full High Definition Video Conferencing 1+7 Multiparty Full HD End Point 1+7 Multiparty Full HD End Point Does it require mandatory registration with MCU NA - Video Conferencing System Resolution End point based Full HD(1080p, 30), End point based Full HD(1080p, 60) - Minimum Bandwidth Required for Specified video quality at End point/far-site end (Mbps) 2 - The End Point is a point to point system upgradable to Multiparty Video conferencing with full high definition camera and codec for simple installation with a TV LED/LCD display suitable for specified bandwidth of IP Yes - 1/8 network through RJ-45 connectivity: Type of sensor for 1920 x 1080p, in order to accept Full HD resolution video CMOS - Optical zoom 10X 10X Digital zoom 12X - Field of View at zoom - - Pan range (Degree) +/- 100 degree - Tilt Range (Degree) +/20/-30 degree - Cord and Connector to be supplied Yes - System delivers Full HD video and voice & Full HD content for an overall Full HD experience at specified bandwidth Yes - Video coding support Protocol H.263, H.264AVC, H.264 SVC, H.264 High Profile - System has G-722 G-711/G-729 or equivalent nt wideband audio coding support Yes - System supports sharing of Full HD video and graphics content during the video call Yes - System has live resolution of 1920 X 1080 and deliver Full High definition video at 30fps from 2 Mbps onwards Yes - It is possible to see both the near and far site on one Screen thus making most efficient use of a single display area Yes - System is equipped with one or more Omni directional High Definition Microphones as required to cover large conference room Yes - Number of microphone supports 4 - 2/8 Number of camera support from the same OEM 3 - Number of Ethernet connection points for System supports for RJ-45, 10/100/1000 Mbps Base-T Ethernet connection 2 - System supports AES encryption video calls; System has Encryption On and Off capability Yes - Video Codec shall support 16:9 format for supporting LCD/LED display unit and PAL NTSC video standard Yes - Power supply: 230 + or - 10% volts, 50 Hz Yes - Shall come with easy to use infra-red hand held remote control with operating distance Yes - All equipment are in compliance with the requirements of ITU-T Standard related to Video Conferencing Yes - System to be IPv6 ready from day one Yes - System uses standards based protocols and the offered system is interoperable with any existing H-323 AVC/SVC based video conferencing equipment in a point to point call on the video conferencing end point; All Hardware and Software required to make it interoperable is included in the scope of supply Yes - Minimum number of I/O ports ( 2 x DVI or 2 x HDMI or 2 x equivalent HD for Video output) 3x HDMI, 3xVGA Outputs - Minimum number of ports (1 x HDMI or 2xHDCI, 3XHDMI, 1x Component, 3/8 equivalent for Main Camera) 1xComposite, 1xVGA Minimum number of ports (1 x DVI or 1 x HDMI or USB 3 or higher for PC connectivity) Yes - Recording @1080p on the end point No - System is supplied complete with the following components from the same OEM : (a) Full HD Codec (b) Full High Definition Camera (c) At least one Omni Directional Microphones with suitable connectivity (d) Remote Control (e) Data sharing capability using hardware or software (f) All cables necessary for above features Yes - System is also tropicalized and report available from ILAC/NABL/Govt Lab with all add on if being supplied to buyer as per following requirement (a) Dry Heat Test : For 16 hour at a temperature of 55 degree C in accordance with IS:9000/part-3/sec tion-5/1977 (Reaffirmed 2007) (b) Cold Test : For 4 hour At a temperature of 0 degree C in accordance with IS:9000/part-2/sec tion-4/1977 (Reaffirmed 2007) (c) Damp Heat Test : For 2 Cycles of 24 h each at a temperature of 40 degree C & 95% RH in accordance with IS:9000/part- 5/section-1/1991 (Reaffirmed 2007) After each environmental test and a recovery No - 4/8 period of two hours, the video conferencing system has been checked for complete functional parameters, and the results found satisfactory Type Test Report from ILAC/NABL/Govt lab confirming conformance to above technical specifications - to be made available to buyer No - BIS Registration under CRS of Meity NA - BIS Registration Number and its Validity NA - UL/CE certification No - if yes, UL/CE certificate Number (Furnished when demanded by buyer ) UB160754014518 - Operating temperature Range (Degree C) 0 to 40 degree C - Operating humidity (%RH) 15 to 80% - Free installation and commissioning Yes - On Site OEM Warranty (Year) 5 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Om Prakash Meena 110001, Room No 716, 7th floor, Bharat Sanchar Bhawan, HC Mathur Lane, Janpath 1 15 Camera For Video Conferencing System ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Camera for Video Conferencing System Camera without Codec - Type of Camera PTZ CAMERA FOR - 5/8 VIDEO CONFERENCING SYSTEM Resolution Full HD(1920 x 1080 progressive signal) - Frame Rate (fps) 60 fps - Zoom Range Optical 10X - Zoom Range Digital 12X - Field of View (Degree) 65 degree normal - Pan Range (Degree) +/-100 degree - Tilt Range (Degree) +20/-30 degree - Type of Sensor CMOS - Camera Positioning Facility Automatic Voice- activated - Input/Output Port HDMI, RCA, USB 3.0, HDCI 3X, 4X, 5X, 10X, 12X, 20X, 30X, NA Camera Control (focusing, brightness, and white balance) Automatic - Minimum Illumination Required 50 lux - SNR 50 db - PoE No - PoE+ No Point to Point, non upgradable, Point to Point upgradable, 1+3 Multiparty Full HD End Point, 1+5 Multiparty Full HD End Point, 1+7 Multiparty Full HD End Point, 1+8 Multiparty Full HD End Point, 1+9 Multiparty Full HD End Point BIS Registration under CRS of Meity NA - If yes, BIS Registration Number and its validity - - UL/CE certification Yes - UL/CE certificate Number (Furnished when demanded by buyer ) - - Operating temperature Range (Degree C) 0 to 40 degree - Operating humidity (%RH) 10 to 90 - 6/8 Availability of test reports to prove conformity to the specifications (Furnished when demanded by buyer ) Yes - Installation and commissioning Yes - On SIte OEM Warranty (Year) 5 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Om Prakash Meena 110001, Janpath 1 15 EMD Required No ePBG Advisory Bank HDFC Bank ePBG Percentage(%) 5.00 Duration of ePBG required (Months). 62

Desktops

dot matrix printers Average Turn Over of Last 3 Years 24 Lakh (s) Experience with Gov. Required 3 Year (s) Dot Matrix Printers ( 92 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Number of Pins (Nos.) 9 9, 24 Number of Columns (Nos.) 80 80, 136 Print Speed at Draft Mode at 10 cpi (cps) 10 Print Speed at High Speed Draft Mode at 10 cpi (cps) 300 Print Speed at NLQ Mode at 10 cpi for 9 pin only (cps) 10 - Print Speed at LQ Mode at 10 cpi for 24 pin only (cps) 12 - Input Data Buffer Capacity (KB) 100 50, 100 Auto share feature Yes - Parallel Port Available - USB Available - Network Interface ( LAN Not Available - 1/3 ) Over all dimensions (Length x Width x Height) (mm) 147mm(H)x433mm(w) x379mm(d) - Weight (Kgs) 5.7 - Power Supply 230 V AC - Power consumption- max in Print Mode (watts) 12 - Power consumption- max in Standby Mode (watts) 0.9 - BIS Registration under CRS of Meity Yes - BIS Registration Number - - Availability of test reports from Central Govt/NABL/ILAC accredited Lab showing conformity to the specification Yes - If yes, Test Report Number - - If Yes, Test Report date - - If Yes, Name of Test lab - - If yes, Address of Test Lab - - On Site OEM Warranty (Years) 1 1, 2 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vimal Kishore 831003, Sr Supdt. Of Post Offices, Singhbhum 92 15 EMD Required No ePBG Required No 2/3

OEM Cartridge/Consumable, OEM Cartridge Consumable, OEM Cartridge/Consuma Average Turn Over of Last 3 Years 5000000 Lakh (s) Experience with Gov. Required 3 Year (s) OEM Cartridge/Consumable ( 6 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 12A Black Original LaserJet Toner Cartridge - Corresponding Part number/code Q2612AC - Printer Model number/numbers for which Cartridge is suitable HP Laserjet 1010, HP LaserJet 1012 Printer, HP LaserJet 1015 Printer, HP LaserJet 1020 Plus Printer, HP LaserJet 1020 Printer, HP LaserJet 1022n Printer, HP LaserJet - 1/11 M1005 MFP Printer, HP LaserJet M1319f MFP Printer, HP LJ3050 All-in- One Printer, HP LJ3052 All-in-One Printer, HP LJ3055 All-in-One Printer Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 2000 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Atul Chaturvedi 226010, Vidyut Niyamak Bhawan, Uttar Pradesh Electricity Regulatory Commission, Vibhuti Khand, Lucknow, UP - 226010 6 15 OEM Cartridge/Consumable ( 3 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Ink - Colour of Cartridges/Consumable s Ti-Color - Ink/Toner/Drum Model number HP 802 Tri-color Ink Cartridge - Corresponding Part number/code CH564ZZ - Printer Model number/numbers for which Cartridge is suitable HP Deskjet 1000 Printer J110a, HP Deskjet 1010 Printer, HP Deskjet 1050 All-in-One Printer J410a, HP Deskjet 1510 All-in-One Printer, HP Deskjet 2000 Printer J210a, HP Deskjet 2050 All-in-One Printer J510a, HP Deskjet 3050 All-in-One Printer J610a - 2/11 Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 300 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Atul Chaturvedi 226010, UP - 226010 3 15 OEM Cartridge/Consumable ( 3 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Ink - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 802 Black Ink Cartridge - Corresponding Part number/code CH563ZZ - Printer Model number/numbers for which Cartridge is suitable HP Deskjet 1000 Printer J110a, HP Deskjet 3050 All-in-One Printer J610a - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 360 - * Bold specifications are the golden parameters. Consignees and Quantity 3/11 S.No. Consignee Address Quantity Delivery Days 1 Atul Chaturvedi 226010, UP - 226010 3 15 OEM Cartridge/Consumable ( 3 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 80A Black Original LaserJet Toner Cartridge - Corresponding Part number/code CF280A - Printer Model number/numbers for which Cartridge is suitable HP LaserJet Pro 400 M401d Printer, HP LaserJet Pro 400 M401dn Printer, HP LaserJet Pro 400 M401dne Printer, HP LaserJet Pro 400 M401dw Printer, HP LaserJet Pro 400 M401n Printer, HP LaserJet Pro 400 M425dn MFP Printer, HP LaserJet Pro 400 M425dw MFP Printer - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 2700 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 4/11 1 Atul Chaturvedi 226010, UP - 226010 3 15 OEM Cartridge/Consumable ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 88A Black Original LaserJet Toner Cartridge - Corresponding Part number/code CC388AC - Printer Model number/numbers for which Cartridge is suitable HP LaserJet M1136 MFP Printer, HP LaserJet M1136 MFP Value Bundle, HP LaserJet M1213nf MFP Printer, HP LaserJet M1216nfh MFP Printer, HP LaserJet P1007 Printer, HP LaserJet P1008 Printer, HP LaserJet P1106 Printer, HP LaserJet P1108 Printer, HP LaserJet Pro M1218nfs MFP Printer, HP LaserJet Pro M202dw Printer, HP LaserJet Pro M202n Printer, HP LaserJet Pro MFP M126nw Printer, HP LaserJet Pro MFP M128fn Printer, HP LaserJet Pro MFP M128fw Printer, HP LaserJet Pro MFP M226dn Printer, HP LaserJet Pro MFP M226dw Printer - Yield of the Cartridge as per ISO/IEC:19752/2 1500 - 5/11 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Atul Chaturvedi 226010, UP - 226010 2 15 OEM Cartridge/Consumable ( 12 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 78A Black Original LaserJet Toner Cartridge - Corresponding Part number/code CE278AC - Printer Model number/numbers for which Cartridge is suitable HP LaserJet M1536dnf MFP Printer, HP LaserJet P1566 Printer, HP LaserJet P1606dn Printer - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 2100 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Atul Chaturvedi 226010, Uttar Pradesh Electricity Regulatory 12 15 6/11 Commission, UP - 226010 OEM Cartridge/Consumable ( 3 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Ink - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 950XL Black Officejet Ink Cartridge - Corresponding Part number/code CN045AA - Printer Model number/numbers for which Cartridge is suitable HP Officejet 8600 Plus e-AiO Prntr N911g, HP Officejet Pro 251dw Printer, HP Officejet Pro 276dw MFP Printer, HP Officejet Pro 8100 Printer N811a, HP Officejet Pro 8600 e- AiO Prntr N911a, HP Officejet Pro 8610 e- AiO Printer, HP Officejet Pro 8620 e-AiO Printer - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 2300 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Atul Chaturvedi 226010, UP - 226010 3 15 OEM Cartridge/Consumable ( 3 ) Technical Specifications 7/11 Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Ink - Colour of Cartridges/Consumable s Magenta - Ink/Toner/Drum Model number HP 951XL Magenta Officejet Ink Cartridge - Corresponding Part number/code CN047AA - Printer Model number/numbers for which Cartridge is suitable HP Officejet 8600 Plus e-AiO Prntr N911g, HP Officejet Pro 8620 e-AiO Printer - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1500 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Atul Chaturvedi 226010, UP - 226010 3 15 OEM Cartridge/Consumable ( 3 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Ink - 8/11 Colour of Cartridges/Consumable s Yellow - Ink/Toner/Drum Model number HP 951XL Yellow Officejet Ink Cartridge - Corresponding Part number/code CN048AA - Printer Model number/numbers for which Cartridge is suitable HP Officejet 8600 Plus e-AiO Prntr N911g, UP - 226010 3 15 OEM Cartridge/Consumable ( 3 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Ink - Colour of Cartridges/Consumable s Cyam - Ink/Toner/Drum Model number HP 951XL Cyan Officejet Ink Cartridge - Corresponding Part CN046AA - 9/11 number/code Printer Model number/numbers for which Cartridge is suitable HP Officejet 8600 Plus e-AiO Prntr N911g, UP - 226010 3 15 EMD Required No ePBG Advisory Bank State Bank of India ePBG Percentage(%) 2.00 Duration of ePBG required (Months). 6

lead acid battery Average Turn Over of Last 3 Years 6 Lakh (s) Experience with Gov. Required 3 Year (s) Lead Acid Battery ( 98 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Types of Lead Acid of Battery Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments, Statinary Lead-Acid Batteries (with tubular positive plates) in Monobloc Container conforming to IS:13369/1992, Statio nary cells and Batteries, Lead Acid Type (With Tubular Positive Plates) conforming to IS:1651/1991, Stationar y Valve Regulated Lead Acid Batteries conforming to IS:15549 2005, Lead-Acid Storage Batteries for Motor Vehicles with Light weight and High Cranking Performance 1/3 conforming to IS:14257 1995, Lead-Acid Storage Batteries for Motor Vehicles conforming to IS:7372/1995 Nominal Voltage of Battery (volts) 12.0 Volt 12.0 Volt Material of container Polypropylene Hard Rubber, Fibre Reinforced Plastics (FR P), Polypropylene, ABS Rated Capacity at C20 discharge (AH) 26 26, 26.0 Warranty (Years) 2 Years 1 Year, 2 Years, 3 Years, 4 Years, 5 Years Battery Condition Charged - CONSTRUCTIONAL Dimensions (L x W x H) (mm x mm x mm) As per relevant IS Specifications - Volume of Electrolyte (ml) 12 - Weight of Dry Battery (Kg) shall be as per relevant IS: Specn., corresponding Ah Yes. - No.of cells per Battery (No.) 6 Cells for 12 Volt battery - CERTIFICATIONS Availability of Test Reports from Central Govt./NABL/ILAC accrediated Lab showing conformity to the specifications Yes - Address of the Lab BANGLORE - Name of the Lab CPRI - Test Report No. 5793 - Test Report Date 12/12/2010 - Compulsory Registration (CRS) of BIS for safety as per IS 16046 as applicable. Secondary Cells and (Batteries containing Alkaline or other non- acid Electrolytes-Safety Requirements for Portable sealed secondary cells, and for Batteries made from them for use in YES - 2/3 portable applications * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 SNSingh 834001, Supdt. RMS, Ranchi 98 15 EMD Required No ePBG Required No

Printer

load balancer Average Turn Over of Last 3 Years 1100 Lakh (s) Experience with Gov. Required 3 Year (s) Load Balancer ( 4 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Type of Load Balancer Server Load Balancer Link Load Blancer, Server Load Balancer Internet Link Connections Supported by Load balancer 1024 - Concurrent Sessions Support (million) 50 - Network Interface Ports 2 x10GbE SFP+, 8X1GbE RJ 45 - Throughput (Maximum) (Gbps) 26 SSL Throughput (Maximum) (Gbps) 9.5 - Hardware Based SSL Acceleration Yes - SSL Transaction (TPS) 20.5K RSA CPS (2k Keys), 10k ECC CPS (ECDSA-256) - Throughput Scalability Not-Available - If Available, then NA - 1/4 scalable without changing hardware upto (Gbps) Facility to define inbound/outbound (Kbps/Mbps) throughput limit of any link Yes - Device with multicore CPU support Yes - Internal Storage Available - If Available, then capacity of Internal Storage (GB) 500 - RAM (GB) 32 Support Dynamic routing and Static routing Protocols Yes - Support Static NAT Yes - Support Dynamic NAT Yes - Support PAT Yes - Link Health Monitoring Yes - Link Failover Detection Time (Seconds) 10 - Support Virtual Grouping Yes - Support Load Balancing Algorithms round robin, weighted round robin, least connections, least traffic, hash - Supported Load Balancing Layers Layer-2 to Layer-7 - Supported Redundancy Protocol HSRP, VRRP - Built-in authoritative DNS capable Yes - Supported Application optimization modules such as compression, caching, connection multiplexing, SSL offloading, TCP optimization compression, TCP Optimization - Support SNMP Yes - Support both IPv4 and IPv6 Yes - 2/4 Support Bandwidth Management and QoS Yes - Interfaces for device configuration and managment HTTPS, SSH, Console - Input-Output Port RJ-45, USB - Power Supply Dual - Power Consumption (Watt) 140 - Operating Temperature Range (Degree C) 0 to 40 - Storage Temperature Range (Degree C) 0 to 40 - Operating Humidity ( % RH) 5 to 95 - Compliance Certificates RoHS, CE EMC (EU directive 2004/108/EC), FCC Part 15B Class A, ICES-003, VCCI, C-Tick - Availability of Type tests reports from a Central Govt lab OR International Laboratory Accreditaion Cooperation (ILAC)or their worldwide affiliated/recognised labs OR NABL approved lab showing confirmity to the specifications No - If Yes, Name of the Lab NA - If Yes, Address of the Lab NA - If Yes, Test Report Number and Date - - Dimensions (H x W x D) (cm x cm x cm) 4.36x4.06x4.4 - Weight (Kg) 7.5 - On Site OEM Warranty 5 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mruthunjaya Rao 500063, National Data 2 45 3/4 Kavitha Centre A Block, BRKR Bhawan, Tank Bund Road, Hyderabad 500063 2 Vikas Gupta 110053, National Data Centre 564 IT Park Road, Metro Vihar Shastri Park, Jagjit Nagar, New Delhi-110053 2 45 EMD Advisory Bank HDFC Bank EMD Percentage(%) 2.00 EMD Amount 440000 ePBG Advisory Bank AXIS BANK LTD ePBG Percentage(%) 5.00 Duration of ePBG required (Months). 62

hopper or tipper Average Turn Over of Last 3 Years 2000 Lakh (s) Experience with Gov. Required 5 Year (s) Hopper Or Tipper ( 8 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, - Main Engine Capacity (cc) 702 - Make of Chassis - - Type of Chassis Frame - - Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) 1/6 Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 21.5 Speed, Max (Km/Hr) 60 - Max Engine Power BHP (BHP@rpm) 16 Max Engine Torque (N-M@rpm) 39 Main Engine Aspiration Natural Aspiration Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 30 Gradeability of Vehicle with load( %) 16.38 - Gradeability of Vehicle without load ( %) 18 - Ground Clearance (mm) 160 Wheel Base (mm) 160 - Kerb Weight (Kg) 720 Gross Vehicle Weight (Kg) 1700 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - - Type of Front Axle and Suspension System - - Type of Rear Axle and Suspension System - - Type of BIS MARKED Vehicle Tyre Radial - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 4 - Type of Steering Manual Manual, Power 2/6 Operated Turning Radius, Min (mm) 4300 Speed Governers No - ABS Fitted No - Front Vehicle Brake - - Rear Vehicle Brake - - Type of Clutch - - Tipping Angle (Degree) 45 Tipper Container cap acity/Volume(cubic metres) 2.5 2.5 Certification Chassis Certification ARAI/VRDE/ICAT No. - - Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 12 - No. Of Free Service (Nos) 3 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3800 - Width of Chassis (mm) 1500 - Height of Chassis (mm) 1845 - Size Of Front Tyres (mm) - - Size Of Rear Tyres (mm) - - Size of Wheel (mm) 145 Tipper body Pivot length (mm) 1950 - Tipper body Length (mm) 2200 - Tipper Body Height (mm) 1000 - Overall Height of Tipper from Ground (mm) 1840 - Body Plate Thickness (mm) 2 3/6 Main Frame Thickness (mm) 3 Pneumatic System false - Hydarulic System true - Tipping Hydraulic Cylinders(Make) - - Hydraulic System Driven by Power Pack Unit - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - If Yes Auxiliary Diesel Power (HP@rpm) 0 Auxiliary Diesel Engine Transmission - - Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Dumping Height (mm) 354 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - 4/6 If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajendra Janardhan Gaikwad 413201, INDIRA HOSPITAL JAMKHED 8 15 Required No ePBG Required No

Online UPS

lead acid battery Average Turn Over of Last 3 Years 3 Lakh (s) Experience with Gov. Required 3 Year (s) Lead Acid Battery ( 6 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Types of Lead Acid of Battery Lead-Acid Storage Batteries for Motor Vehicles conforming to IS:7372/1995 Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments, Statinary Lead-Acid Batteries (with tubular positive plates) in Monobloc Container conforming to IS:13369/1992, Statio nary cells and Batteries, Lead Acid Type (With Tubular Positive Plates) conforming to IS:1651/1991, Stationar y Valve Regulated Lead Acid Batteries conforming to IS:15549 2005, Lead-Acid Storage Batteries for Motor Vehicles with Light weight and High 1/3 Cranking Performance conforming to IS:14257 1995, Lead-Acid Storage Batteries for Motor Vehicles conforming to IS:7372/1995 Nominal Voltage of Battery (volts) 12.0 Volt 2.0 Volt, 6.0 Volt, 12.0 Volt Material of container Polypropylene Hard Rubber, Fibre Reinforced Plastics (FR P), Polypropylene, ABS Rated Capacity at C20 discharge (AH) 180 180.0, 180 Warranty (Years) 3 Years 1 Year, 2 Years, 3 Years, 4 Years, 5 Years Battery Condition Charged - CONSTRUCTIONAL Dimensions (L x W x H) (mm x mm x mm) As per relevant IS Specifications - Volume of Electrolyte (ml) 15850 - Weight of Dry Battery (Kg) shall be as per relevant IS: Specn., corresponding Ah Yes. - No.of cells per Battery (No.) 6 Cells for 12 Volt battery - CERTIFICATIONS Availability of Test Reports from Central Govt./NABL/ILAC accrediated Lab showing conformity to the specifications Yes - Address of the Lab VIP ROAD KOLKATA - Name of the Lab EXIDE INDUSTRIES LTD. R&D CENTRE - Test Report No. EX/RD/XP1800 - Test Report Date 12-10-2017 - Compulsory Registration (CRS) of BIS for safety as per IS 16046 as applicable. Secondary Cells and (Batteries containing Alkaline or other non- acid Electrolytes-Safety Requirements for Portable sealed secondary cells, and for YES AS PER OEM - 2/3 Batteries made from them for use in portable applications * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 uma shanker shrivastava 325220, ADMN. BUILDING, SHAKTI PARISAR, CTPP, MOTIPURA, TELSIL- CHHABRA, DISTT. BARAN, RAJASTHAN-325220 6 20 EMD Required No ePBG Required No

lead acid battery Experience with Gov. Required 1 Year (s) Lead Acid Battery ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Types of Lead Acid of Battery Lead-Acid Storage Batteries for Motor Vehicles conforming to IS:7372/1995 Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments, Statinary Lead-Acid Batteries (with tubular positive plates) in Monobloc Container conforming to IS:13369/1992, Statio nary cells and Batteries, Lead Acid Type (With Tubular Positive Plates) conforming to IS:1651/1991, Stationar y Valve Regulated Lead Acid Batteries conforming to IS:15549 2005, Lead-Acid Storage Batteries for Motor Vehicles with Light weight and High Cranking Performance conforming to IS:14257 1/3 1995, Lead-Acid Storage Batteries for Motor Vehicles conforming to IS:7372/1995 Nominal Voltage of Battery (volts) 12.0 Volt 12.0 Volt Material of container Polypropylene Hard Rubber, Fibre Reinforced Plastics (FR P), Polypropylene, ABS Rated Capacity at C20 discharge (AH) 80 80, 80.0 Warranty (Years) 3 Years 1 Year, 2 Years, 3 Years, 4 Years, 5 Years Battery Condition Charged - CONSTRUCTIONAL Dimensions (L x W x H) (mm x mm x mm) As per relevant IS Specifications - Volume of Electrolyte (ml) 4900 - Weight of Dry Battery (Kg) shall be as per relevant IS: Specn., corresponding Ah Yes. - No.of cells per Battery (No.) 6 Cells for 12 Volt battery - CERTIFICATIONS Availability of Test Reports from Central Govt./NABL/ILAC accrediated Lab showing conformity to the specifications Yes - Address of the Lab KOLKATA - Name of the Lab EXIDE INDUSTRIES LTD. - Test Report No. EXEP8018 - Test Report Date 22-11-2017 - Compulsory Registration (CRS) of BIS for safety as per IS 16046 as applicable. Secondary Cells and (Batteries containing Alkaline or other non- acid Electrolytes-Safety Requirements for Portable sealed secondary cells, and for Batteries made from them for use in portable applications YES AS PER OEM - 2/3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 uma shanker shrivastava 325220, ADMN. BUILDING, SHAKTI PARISAR, CTPP, MOTIPURA, TELSIL- CHHABRA, DISTT. BARAN, RAJASTHAN-325220 2 20 EMD Required No ePBG Required No

automotive vehicles pneumatic tyres Automotive Vehicles Pneumatic Tyres ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values Ungrouped Category Of Pneumatic tyres Normal Road Tyre Normal Road Tyre, Special use Tyre: mixed used, Restricted speed: snow tyre Tyres Without Tube With Tube, Tubeless, Without Tube Conformity to Indian Standrad for Pneumatic Tyres IS:15636 latest for Automotive vehicles: Pneumatic tyre for commercial Vehicles- Diagonal and radial ply IS:15627 latest for Automotive vehicles: Pneumatic tyre for two and three wheeled motor Vehicles, IS:15633 latest for Automotive vehicles: Pneumatic tyre for passenger car Vehicles-Diagonal and radial ply, IS:15636 latest for Automotive vehicles: Pneumatic tyre for commercial Vehicles-Diagonal and radial ply Conformity to Indian Standrad for Pneumatic Tubes NA for Tubeless TYRES IS:13098 latest for Automotive vehicles: Tubes for Pneumatic tyre, NA for Tubeless 1/3 TYRES ISI MARKED (for Tyres) Yes Yes CM/L No and validity date)(for Tyres 3687885 - ISI MARKED (for Tubes) NA for Tubeless and without tube Yes, NA for Tubeless and without tube CM/L No and validity date(for tubes) NA FOR TUBELESS TYRES - Type of tube NA for Tubeless and without tube - Manufactures name and Trade Name CEAT LIMITED - Tyre-size Designations 195/65R15 195-65-r15, 19565r15 Tube-size Designations NA FOR TUBELESS TYRES - Structure of Tyre Radial Diagonal or bias ply, Bia s-belted, Radial, Reinforc ed or Extra Load Ply Rating NA FOR RADIAL TYRES - Speed Category H - Load indicas 91 - Side Well (mm) 127 - Inner area of Tyers (mm) 65 - Section Width (min)(mm) 201 - Overall Width (max)(mm) 635 - Section Height (mm) 127 - Nominal Aspect Ratio(mm) 65 - Outer diameter (min)(mm) 635 Nominal Rim Diameter(mm) 15 Maximum load Rating(%) 615 Conformity to AIS-044 Yes - Availability of Type Test Report covering complete test parameters as per relevant BIS YES - 2/3 spcification latest for Tyre type, from any ILAC/NABL accredited/Central Gov. LAB. Test cetificate No. IRMRA/TYRE/CEAT-HAL OL/13-14/11947-164 - Test Report Date 26/07/2013 - Name and address of the Lab where test Conducted IRMRA, PLOT NO. 254/1B, ROAD NO. 16V, WAGLE INDUSTRIAL ESTATE, THANE (W)-400604 - Others Certificate ie ROHS, WHO, GMP etc IRMRA - Warranty Time 1 1, 2, 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramesh Kumar 110001, Room No.-422, ICAR, Krishi Bhawan, New Delhi-110001 10 15 EMD Required No ePBG Required No

hopper or tipper Average Turn Over of Last 3 Years 65 Lakh (s) Experience with Gov. Required 1 Year (s) Hopper Or Tipper ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, Garbage Tipper - Main Engine Capacity (cc) 909 Make of Chassis M&M Type of Chassis Frame Semi Integral Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission bs iv bs iv, BS-III (only for 1/6 Complaince Defence) Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 19.5 Speed, Max (Km/Hr) 80 - Main Engine Power BHP@rpm (BHP@rpm) 45 +/- 2% bhp @3750 rpm - Engine Torque Max, @ rpm (N- M@rpm) 98nm @ 1600-3000 rpm Main Engine Aspiration Turbocharged Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 33 Gradeability of Vehicle with load( %) 10 - Gradeability of Vehicle without load ( %) 13 - Ground Clearance (mm) 176 Wheel Base (mm) 2050 - Kerb Weight (Kg) 1095 Gross Vehicle Weight (Kg) 2095 No of Axle (Nos) 1 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) NA - Type of Front Axle and Suspension System Leaf Spring - Type of Rear Axle and Suspension System Leaf Spring - Type of BIS MARKED Vehicle Tyre Tubeless - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 5 - 2/6 Type of Steering Power Operated Manual, Power Operated Turning Radius, Min (mm) 4700 Speed Governers yes - ABS Fitted No - Front Vehicle Brake Disc - Rear Vehicle Brake Drum Type of Clutch Single Plate Dry - Tipping Angle (Degree) 85 Tipper Container cap acity/Volume(cubic metres) 2.5 Certification Chassis Certification ARAI/VRDE/ICAT No. VAKN 0012 Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 12 - No. Of Free Service (Nos) 3 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 4148 - Width of Chassis (mm) 1540 - Height of Chassis (mm) 1915 - Size Of Front Tyres (mm) 155/80 R13 - Size Of Rear Tyres (mm) 155/80 R13 - Size of Wheel (mm) 13 Tipper body Pivot length (mm) 2530 - Tipper body Length (mm) 2100 - Tipper Body Height (mm) 880 - Overall Height of Tipper from Ground (mm) 1785 - Body Plate Thickness 1.6 3/6 (mm) Main Frame Thickness (mm) 1.6 Pneumatic System false - Hydarulic System true - Tipping Hydraulic Cylinders(Make) M&M VAP - Hydraulic System Driven by Main Engine - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - If Yes Auxiliary Diesel Power (HP@rpm) NA Auxiliary Diesel Engine Transmission NA Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 1.6 Dumping Height (mm) 1300 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - 4/6 Counter Weight false - If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Yogesh Subhash Dudhe 445203, Opp. To State Bank Of India 10 15 EMD Advisory Bank HDFC Bank EMD Percentage(%) 1.00 EMD Amount 51115 ePBG Required No

OEM Cartridge/Consumable Average Turn Over of Last 3 Years 300 Lakh (s) Experience with Gov. Required 15 Year (s) OEM Cartridge/Consumable ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Yellow - Ink/Toner/Drum Model number HP 130A Yellow Original LaserJet Toner Cartridge - Corresponding Part number/code CF352A - Printer Model number/numbers for which Cartridge is suitable HP Color LaserJet Pro MFP M176n Printer, HP Color LaserJet Pro MFP M177fw Printer - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1000 - * Bold specifications are the golden parameters. 1/2 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bhojraj Baseshankar 110001, ROOM 312, A Wing, Shastri bhawan 10 15 Required No ePBG Required No

OEM Cartridge/Consumable OEM Cartridge/Consumable ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Magenta - Ink/Toner/Drum Model number HP 130A Magenta Original LaserJet Toner Cartridge - Corresponding Part number/code CF353A - Printer Model number/numbers for which Cartridge is suitable HP Color LaserJet Pro MFP M176n Printer, HP Color LaserJet Pro MFP M177fw Printer - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1000 - * Bold specifications are the golden parameters. Consignees and Quantity 1/2 S.No. Consignee Address Quantity Delivery Days 1 Bhojraj Baseshankar 110001, ROOM 312, A Wing, Shastri bhawan 10 15 Required No ePBG Required No

OEM Cartridge/Consumable Average Turn Over of Last 3 Years 300 Lakh (s) Experience with Gov. Required 15 Year (s) OEM Cartridge/Consumable ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Cyam - Ink/Toner/Drum Model number HP 130A Cyan Original LaserJet Toner Cartridge - Corresponding Part number/code CF351A - Printer Model number/numbers for which Cartridge is suitable HP Color LaserJet Pro MFP M176n Printer, HP Color LaserJet Pro MFP M177fw Printer - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1000 - * Bold specifications are the golden parameters. 1/2 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bhojraj Baseshankar 110001, ROOM 312, A Wing, Shastri bhawan 10 15 Required No ePBG Required No

OEM Cartridge/Consumable Average Turn Over of Last 3 Years 300 Lakh (s) Experience with Gov. Required 15 Year (s) OEM Cartridge/Consumable ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 130A Black Original LaserJet Toner Cartridge - Corresponding Part number/code CF350A - Printer Model number/numbers for which Cartridge is suitable HP Color LaserJet Pro MFP M176n Printer, HP Color LaserJet Pro MFP M177fw Printer - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1300 - * Bold specifications are the golden parameters. 1/2 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bhojraj Baseshankar 110001, ROOM 312, A Wing, Shastri bhawan 10 15 Required No ePBG Required No

OEM Cartridge/Consumable Average Turn Over of Last 3 Years 300 Lakh (s) Experience with Gov. Required 15 Year (s) OEM Cartridge/Consumable ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Magenta - Ink/Toner/Drum Model number HP 131A Magenta Original LaserJet Toner Cartridge - Corresponding Part number/code CF213A - Printer Model number/numbers for which Cartridge is suitable HP LaserJet Pro 200 Color M251n Printer, HP LaserJet Pro 200 Color M251nw Printer, HP LaserJet Pro 200 M276n Clr MFP Printer - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) 1800 - 1/2 for colour (Numbers) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bhojraj Baseshankar 110001, ROOM 312, A Wing, Shastri bhawan 10 15 Required No ePBG Required No

OEM Cartridge/Consumable Average Turn Over of Last 3 Years 300 Lakh (s) Experience with Gov. Required 15 Year (s) OEM Cartridge/Consumable ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Yellow - Ink/Toner/Drum Model number HP 131A Yellow Original LaserJet Toner Cartridge - Corresponding Part number/code CF212A - Printer Model number/numbers for which Cartridge is suitable HP LaserJet Pro 200 Color M251n Printer, HP LaserJet Pro 200 Color M251nw Printer, HP LaserJet Pro 200 M276n Clr MFP Printer - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) 1800 - 1/2 for colour (Numbers) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bhojraj Baseshankar 110001, ROOM 312, A Wing, Shastri bhawan 10 15 Required No ePBG Required No

OEM Cartridge/Consumable Average Turn Over of Last 3 Years 300 Lakh (s) Experience with Gov. Required 15 Year (s) OEM Cartridge/Consumable ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Cyam - Ink/Toner/Drum Model number HP 131A Cyan Original LaserJet Toner Cartridge - Corresponding Part number/code CF211A - Printer Model number/numbers for which Cartridge is suitable HP LaserJet Pro 200 Color M251n Printer, HP LaserJet Pro 200 Color M251nw Printer, HP LaserJet Pro 200 M276n Clr MFP Printer - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) 1800 - 1/2 for colour (Numbers) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bhojraj Baseshankar 110001, ROOM 312, A Wing, Shastri bhawan 10 15 Required No ePBG Required No

backhoes

hopper or tipper Average Turn Over of Last 3 Years 50 Lakh (s) Experience with Gov. Required 5 Year (s) Hopper Or Tipper ( 68 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, - Main Engine Capacity (cc) 793 Make of Chassis - - Type of Chassis Frame - - Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) 1/6 Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 22.07 Speed, Max (Km/Hr) 80 - Main Engine Aspiration Turbocharged Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 30 Gradeability of Vehicle with load( %) 38 - Gradeability of Vehicle without load ( %) 37 - Ground Clearance (mm) 175 Wheel Base (mm) 2110 - Kerb Weight (Kg) 860 Gross Vehicle Weight (Kg) 1620 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - - Type of Front Axle and Suspension System - - Type of Rear Axle and Suspension System - - Type of BIS MARKED Vehicle Tyre Tubeless - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 5 - Type of Steering Manual Manual, Power Operated Turning Radius, Min (mm) 4.3 Speed Governers No - 2/6 ABS Fitted No - Front Vehicle Brake - - Rear Vehicle Brake - - Type of Clutch - - Tipping Angle (Degree) 45 Tipper Container cap acity/Volume(cubic metres) 1.8 1.8 Certification Chassis Certification ARAI/VRDE/ICAT No. - - Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 24 - No. Of Free Service (Nos) 4 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 2230 - Width of Chassis (mm) 1488 - Height of Chassis (mm) 13 - Size Of Front Tyres (mm) - - Size Of Rear Tyres (mm) - - Size of Wheel (mm) 3250 Tipper body Pivot length (mm) 1650 - Tipper body Length (mm) 2500 - Tipper Body Height (mm) 1050 - Overall Height of Tipper from Ground (mm) 2150 - Body Plate Thickness (mm) 1.5 Main Frame Thickness (mm) 2 Pneumatic System false - Hydarulic System true - 3/6 Tipping Hydraulic Cylinders(Make) - - Hydraulic System Driven by Power Pack Unit - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - Auxiliary Diesel Engine Transmission - - Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 1.6 Dumping Height (mm) 600 Engine Oil Pressure Level Indicator in Control Panel false - Fuel Gauge Indicator in Control Panel false - Engine Cooling Liquid Temperature Indicator in Control Panel false - Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight true - If yes Counter Weight (kg) 50 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 4/6 1 Sunil Rajaram Belekar 416115, Ichalkaranji Municipal Council, New building station Road 68 15

thin client computers Thin Client Computers ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values Configuration Type Desktop Thin Client Desktop Thin Client, Mobile Thin Client Processor make Intel Intel Chipset Intel - Operating system, Number of Core & Processor Speed Windows embedded Standard 10 or higher with browser Quad Core, Min 2 Ghz Windows embedded Standard 10 or higher with browser Quad Core, Min 2 Ghz Graphics Integrated Integrated, Discrete Type of RAM DDR3 - RAM Size (GB) 4 2, 4, 8, 16 Storage (Powered Flash) (GB) 32 8, 16, 32, 64 Printer support Local and Network - Wi-Fi Connectivity 802.11/ac 802.11a/b/g/n, 802.11 ac, NA Display/Monitor Display/Monitor Not Available Available, Not Available Display Type Discrete in case of Desktop Thin Client Integrated in case of Mobile Thin Client, Discrete in case of Desktop Thin Client Display Size (Inch) 18.5 1/3 Display Resolution (Pixels) 1024 X 2019 - Ports USB port 2.0 (Nos) 2 - USB port 3.0 or higher (Nos) 2 - Serial Port 1 - Parallel Port 0 - USB C 0 - VGA Port 1 - DVI Port 0 - Audio Mic in and speaker out - Display Port 0 - HDMI 0 - Networking port Ethernet 10/100/1000 - Input Output Devices Keyboard Standard With USB Interface - Mouse 2 button scroll optical mouse with USB interface - Certifications BIS Registration under CRS of Meity Yes - BIS Registration Number - - Miscellaneous Networking Protocols TCP/IP with DNS and DHCP, twisted pair (RJ-45), point to point protocol (PPP), PPP over ethernet (PPPoE), point to ponit tunneling protocol (PPTP), wake on LAN - Terminal server protocols Integrated microsoft RDP/Citrix ICA./VM Ware - Operating System & Management Software Windows embedded OS with IE 10.0 browser or higher enterprise client management software from the same OEM - Additional features DHCP/FTP enabled flash upgrade, VNC server & txtpad, multi user/single user log on support locally. - Power Supply (Watts) 45 - Carry case No - 2/3 On Site OEM Warranty (Year) 3 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Raju Vasudeo Mogera 577201, EPFO REGIONAL OFFICE KARTHIK PLAZA DURGI GUDI MAIN ROAD SHIMOGA 5 15 Required No ePBG Required No

Notebook Computers-laptop Notebook Computers-laptop ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel Intel Processor Generation 7 th 7 th, 8 th Processor Intel Core i7-7700HQ (2.80GHz, 6MB Cache, 4 Cores) Intel Core i7-7500U (upto 3.5 GHz, 4 MB cache, 2 cores), Intel Core i7-7700HQ (2.80GHz, 4 Cores), Intel Core i7 7820HQ (2.9 GHz, 8 MB cache, 4 cores) Graphics Graphics Type Dedicated/Discrete - Graphics Card Description NVIDIA® GeForce® GTX 1060 - Graphics Memory (GB) 6 - Memory Type of RAM DDR 4 - RAM Size (GB) 16 16 RAM Expandable upto (GB) 64 8, 16, 32, 64, NA RAM Speed (MHz) 2400 - Storage Type of Hard Disk Drive SSD SATA, SSD, Fusion, PCIe- based onboard SSD Hard Disk Drive Size( 256 128, 256, 512, 500, 1000, 1/4 GB) 2000 Hard Disk Drive Speed (rpm) 5400 - Operating System Operating System Windows 10 Home Windows 10 Home, Windows 10 Professional, Linux, Mac OS Sierra or Latest, DOS Ports USB 3.0 or higher (No.) 3 - USB Type C Available - VGA Port Available - HDMI Port Available - DISPLAY PORT Available - Thunderbolt Port 1 - Connectivity Network Connectivity Ethernet Gigabit 10/100/1000 - Wi-fi Connectivity 802.11 a/b/g/n - Bluetooth 4.0 or higher - Display Display Type Touch - Display Size (Inch) 15.6 Display Resolution (Pixel) 1920 x 1080 1366 x 768, 1440 x 900, 1920 x 1080, 2304 x 1440, 2560 x 1600, 2736 x 1824, 2880 x 1800, 3200 x 1800, 3840 x 2160 Certification BIS Registration under CRS of Meity Yes - BIS Registration no. - - BEE/Energy Star Certification - - ROHS Compliance Yes - Additional feature Finger Print Reader No - Webcam (HD or Better) Available - Miscellaneous Optical Drive Available - Keyboard Standard - Trusted Platform Module Enabled Yes - Weight (With Battery) (Kg) 3 - Carry Case Included Included, Not Included Power Battery Type (Li-Ion/Li- Polymer) Built-in - 2/4 Battery Back-up (Hours) 5 - Warranty Battery Warranty (Year) 3 1, 3 On Site OEM Warranty (Year) 1 1, 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vishnu Vijayan 695581, IIITM-K BUILDING, TE CHNOPARK, KARYAVATTOM PO, TRIVANDRUM 1 15 EMD Required No ePBG Required No

Printer

OEM Cartridge/Consumable Average Turn Over of Last 3 Years 300 Lakh (s) Experience with Gov. Required 15 Year (s) OEM Cartridge/Consumable ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Magenta - Ink/Toner/Drum Model number HP 126A Magenta Original LaserJet Toner Cartridge - Corresponding Part number/code CE313A - Printer Model number/numbers for which Cartridge is suitable HP Color LaserJet CP1025 Printer, HP Color LaserJet Pro100 M175a MFP Printer, HP LaserJet CP1025 Color Printer, HP LaserJet CP1025nw Color Printer, HP LaserJet Pro 100 M175nw Clr MFP Printer, HP LaserJet Pro 200 Clr MFP M275nw - 1/2 Printer Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1000 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bhojraj Baseshankar 110001, ROOM 312, A Wing, Shastri bhawan 10 15 Required No ePBG Required No

OEM Cartridge/Consumable Average Turn Over of Last 3 Years 300 Lakh (s) Experience with Gov. Required 15 Year (s) OEM Cartridge/Consumable ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Yellow - Ink/Toner/Drum Model number HP 126A Yellow Original LaserJet Toner Cartridge - Corresponding Part number/code CE312A - Printer Model number/numbers for which Cartridge is suitable HP Color LaserJet CP1025 Printer, HP Color LaserJet Pro100 M175a MFP Printer, HP LaserJet CP1025 Color Printer, HP LaserJet CP1025nw Color Printer, HP LaserJet Pro 100 M175nw Clr MFP Printer, HP LaserJet Pro 200 Clr MFP M275nw - 1/2 Printer Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1000 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bhojraj Baseshankar 110001, ROOM 312, A Wing, Shastri bhawan 10 15 Required No ePBG Required No

OEM Cartridge/Consumable Average Turn Over of Last 3 Years 300 Lakh (s) Experience with Gov. Required 15 Year (s) OEM Cartridge/Consumable ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Cyam - Ink/Toner/Drum Model number HP 126A Cyan Original LaserJet Toner Cartridge - Corresponding Part number/code CE311A - Printer Model number/numbers for which Cartridge is suitable HP Color LaserJet CP1025 Printer, HP Color LaserJet Pro100 M175a MFP Printer, HP LaserJet CP1025 Color Printer, HP LaserJet CP1025nw Color Printer, HP LaserJet Pro 100 M175nw Clr MFP Printer, HP LaserJet Pro 200 Clr MFP M275nw - 1/2 Printer Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1000 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bhojraj Baseshankar 110001, ROOM 312, A Wing, Shastri bhawan 10 15 Required No ePBG Required No

Printer or photo Copier Paper Printer Or Photo Copier Paper ( 100 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 14490 : Latest Yes - Test Method as per IS: 1060 Yes - Size Size and Dimension of The Paper (W X L) in mm 210 x 297 210 x 297, 297 X 420 Size of the Paper A4 A4, A3 GSM of Paper 75 75, 80, 90, 95 Quantity Number of Sheets per Ream 500 500 Physical Characteristics Brightness in % 85 Tensile Index MD in Nm/g 45 - Tensile Index CD in Nm/g 40 - Opacity in % 85 - Tear Index (Avg) in Nm.m²/g 4.5 - Smoothness for both sides (Bendtsen) in ml/min 225 - 1/2 Thickness in µm 98 - Moisture in % 5 - Stiffness MD 3 - Stiffness CD 3 - Surface Strength Dennison (Wax Pick) >= 12 A 12A - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Janardhan Hari Sahare 400614, Room No. 506, 5 th Floor, Konkan Bhavan, CBD Belapur, Navi Mumbai. 100 15 Required No ePBG Required No

OEM Cartridge/Consumable Average Turn Over of Last 3 Years 300 Lakh (s) Experience with Gov. Required 15 Year (s) OEM Cartridge/Consumable ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 126A Black Original LaserJet Toner Cartridge - Corresponding Part number/code CE310A - Printer Model number/numbers for which Cartridge is suitable HP Color LaserJet CP1025 Printer, HP Color LaserJet Pro100 M175a MFP Printer, HP LaserJet CP1025 Color Printer, HP LaserJet CP1025nw Color Printer, HP LaserJet Pro 100 M175nw Clr MFP Printer, HP LaserJet Pro 200 Clr MFP M275nw - 1/2 Printer Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1200 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bhojraj Baseshankar 110001, ROOM 312, A Wing, Shastri bhawan 10 15 Required No ePBG Required No