Buyer Organistion Tender Results

OEM Cartridge/Consumable Average Turn Over of Last 3 Years 100 Lakh (s) Experience with Gov. Required 5 Year (s) OEM Cartridge/Consumable ( 100 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 78A Black Original LaserJet Toner Cartridge - Corresponding Part number/code CE278AC - Printer Model number/numbers for which Cartridge is suitable HP LaserJet M1536dnf MFP Printer, HP LaserJet P1566 Printer, HP LaserJet P1606dn Printer - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 2100 - 1/2 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Harjasmeet Singh 110011, Room No 39 C, South Block, DHQ PO, New Delhi -110011 100 15 Required No ePBG Required No

Submersible Cable for Submersible Pumps (Insulated or covered cable) Average Turn Over of Last 3 Years 500000 Lakh (s) Experience with Gov. Required 3 Year (s) Submersible Cable For Submersible Pumps (Insulated Or Covered Cable) ( 1000 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Cable Type THREE CORE FLAT CABLES WITH PVC INSULATION AND SHEATHED with multistrand flexible Copper Conductor FOR Submersible Pumps (FORMAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C) duly ISI marked to IS:694 latest TWO CORE FLAT CABLES WITH PVC INSULATION AND SHEATHED with multistrand flexible Copper Conductor FOR Submersible Pumps (FOR MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C) duly ISI marked to IS:694 latest, THREE CORE FLAT CABLES WITH PVC INSULATION AND SHEATHED with multistrand flexible Copper Conductor FOR Submersible Pumps (FORMAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C) duly ISI marked to IS:694 latest 1/3 CONSTRUCTION Size of Cable (Sqmm) 6 2.5, 4, 6, 10, 16 Number of cores 3 - Material of conductor Copper(EC grade) - Shape of conductor Stranded - Insulation Type C — Heat- resistant cables (HR) as per IS 5831 latest - Sheath "Type ST2 — cables sheathed with 85°C HRPVC compound to IS 5831 latest" - In addition to marking requirements as per relevant specification, sequential marking for length, Size of the cable, Type of the cable shall be embossed on every metre of the cable YES - standard cable length in a Coil/Reel 100 - Part length which can be supplied by seller 10 - CERTIFICATION BIS marked YES - BIS certificate number - - Availability of Type test report from Central government/NABL/ILAC accridiated laoratory to prove conformity to the specification for minimum and maximum ratings YES - Type Test Certificate No - - Type Test Certificate date - - Name of Lab - - Address of Lab - - Test Report to be furnished to the buyer on demand YES - * Bold specifications are the golden parameters. Consignees and Quantity 2/3 S.No. Consignee Address Quantity Delivery Days 1 Chandrashekhar Sahu 495223, nagar palika parisad tifra 1000 15 EMD Required No ePBG Required No

OEM Cartridge/Consumable Average Turn Over of Last 3 Years 300 Lakh (s) Experience with Gov. Required 15 Year (s) OEM Cartridge/Consumable ( 50 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 78A Black Original LaserJet Toner Cartridge - Corresponding Part number/code CE278AC - Printer Model number/numbers for which Cartridge is suitable HP LaserJet M1536dnf MFP Printer, HP LaserJet P1566 Printer, HP LaserJet P1606dn Printer - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 2100 - 1/2 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bhojraj Baseshankar 110001, ROOM 312, A Wing, Shastri bhawan 50 15 Required No ePBG Required No

OEM Cartridge/Consumable Average Turn Over of Last 3 Years 300 Lakh (s) Experience with Gov. Required 15 Year (s) OEM Cartridge/Consumable ( 50 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 18A Blk Contract LJ Toner Cartridge (CF218A) - Corresponding Part number/code CF218AC - Printer Model number/numbers for which Cartridge is suitable HP LaserJet Pro M104a Printer, HP LaserJet Pro M104w Printer, HP LaserJet Pro MFP M132a Printer, HP LaserJet Pro MFP M132nw Printer, HP LaserJet Pro MFP M132snw Printer, HP LaserJet Pro MFP M132fn Printer, HP - 1/2 LaserJet Pro MFP M132fw Printer Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1400 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bhojraj Baseshankar 110001, ROOM 312, A Wing, Shastri bhawan 50 15 Required No ePBG Required No

Printer

alumino ferric Alumino Ferric ( 20000 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conformity to Indian Standard IS 299:Latest YES - ISI Marked false BIS Licence Number NA - Test Report Details Availability of Test Reports of from Central Govt./State Govt/NABL/IL AC accredited Lab to prove conformity to the Specification YES YES, NO Test Report Number 18 - Test Report Date 20.01.2016 - Name of the Lab PHE State Lab Bhopal - Address of the Lab Bhopal - Test report to be furnished to the buyer on demand YES - Grade Grade Grade 4 (in solid form for treatment of water intended for drinking) - Packing Packing Size (Kg) 19 Packing Material Loose Slab - 1/2 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vasudev Bhushan 460001, Nagar Palika Town Hall Kothi bazar Betul 20000 15

lead acid battery Lead Acid Battery ( 100 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Types of Lead Acid of Battery Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments, Statinary Lead-Acid Batteries (with tubular positive plates) in Monobloc Container conforming to IS:13369/1992, Statio nary cells and Batteries, Lead Acid Type (With Tubular Positive Plates) conforming to IS:1651/1991, Stationar y Valve Regulated Lead Acid Batteries conforming to IS:15549 2005, Lead-Acid Storage Batteries for Motor Vehicles with Light weight and High Cranking Performance conforming to IS:14257 1995, Lead-Acid Storage Batteries for 1/3 Motor Vehicles conforming to IS:7372/1995 Nominal Voltage of Battery (volts) 12.0 Volt 2.0 Volt, 6.0 Volt, 12.0 Volt Material of container Polypropylene Hard Rubber, Fibre Reinforced Plastics (FR P), Polypropylene, ABS Rated Capacity at C20 discharge (AH) 7 Warranty (Years) 1 Year 1 Year, 2 Years, 3 Years, 4 Years, 5 Years Battery Condition Dry Charged - CONSTRUCTIONAL Dimensions (L x W x H) (mm x mm x mm) As per relevant IS Specifications - Volume of Electrolyte (ml) 10.9 - Weight of Dry Battery (Kg) shall be as per relevant IS: Specn., corresponding Ah Yes. - No.of cells per Battery (No.) 6 Cells for 12 Volt battery - CERTIFICATIONS Availability of Test Reports from Central Govt./NABL/ILAC accrediated Lab showing conformity to the specifications Yes - Address of the Lab bangalore - Name of the Lab CPRI - Test Report No. 2554JOZLWRT255 - Test Report Date 11 SEPT 2017 - Compulsory Registration (CRS) of BIS for safety as per IS 16046 as applicable. Secondary Cells and (Batteries containing Alkaline or other non- acid Electrolytes-Safety Requirements for Portable sealed secondary cells, and for Batteries made from them for use in portable applications Yes - * Bold specifications are the golden parameters. 2/3 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Harbans Singh 110066, 2nd Floor, Sewa Bhawan, R.K. Puram, New Delhi-110066 100 15 Required No ePBG Required No

Accounting software Accounting Software ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values BASIC INFORMATION OF ACCOUNTING SOFTWARE Name of Software - - Name of the OEM - - OEM Model/Part No - - Product Id of OEM - - Software Description - - Software Version - - Date of Launch of Version - - FEATURES & FUNCTIONALITY PARAMETERS(GOLDEN) GST ready from 'Bill' to 'File' true Multi-National Transactions false Support for e- Payments false Warehouse Management false Business Intelligence true Cloud support & Integration false Integration with other MIS software false 1/6 Budget Management Features true Budget conversion to product features false Budget conversion to services features false Budget Annual Procurement Plan Features false Production (Manufacturing) Management false Planning & Forecasting true Multi-Company support true Supply Chain Management false Strategic Finance and Capital Management false Financial Analysis and Planning true No of days Training Provided at Site 0 0, upto 5, 6 to 10 Number of Years upto which Support is available from OEM/Franchise online(in Years) 1 1, 2, 3, 5 FEATURES & FUNCTIONALITY PARAMETERS(GENERIC) Monitoring of physical parameter support to PFMS false - Accounts Payable true - Accounts Receivable true - General Ledger true - Payroll true - Billing & Invoicing true - Collections true - Cash flow Tracking & Management true - Interest Calculation true - Cheque Management true - Bank Reconciliation true - Bank Integration false - 2/6 Expense Tracking & Management true - Fund Accounting true - Purchase Management true - Sales Management true - Inventory Management true - Stock Management true - Consolidation/Roll-Up true - Fixed Asset Management false - Project Accounting true - Revenue Recognition true - Tax Management true - Audit Trail true - Balance Sheet and Profit/Loss Statement true - Income Statements true - Currency Conversion true - Multi-Department Project support true - Multi-Currency support false - If 'Yes', details of supported Currency - - Multi-language support true - If 'Yes', details of supported Languages - - Multi-Legislation support false - Support for Accounting Standards and Taxation of multiple Countries false - If 'Yes', details of supported Nations - - Compliance Management false - Credit Risk Management false - Liquidity Analysis true - Loan Portfolio Management false - Market Risk Management false - 3/6 Operational Risk Management false - Portfolio Management false - Portfolio Modeling false - Risk Analytics Benchmarks false - Business Management false - Distribution Management false - Reporting & Analysis true - Personalized dash boards based on user role false - SUPPORTED HARDWARE REQUIREMENT PARAMETERS Hard Disk Space Required - - RAM Size required - - Deployment Options true - Server requirements - - CPU required - - Other Hardware requirements - - Operating Systems supported (Driver) - - Supported Devices - - Supported Servers - - Supported Web browsers - - Supported Database - - Supported Networking Protocols - - Min Processor bench mark score required - - Number of Devices Managed 9 - GENERIC PARAMETERS OF ACCOUNTING SOFTWARE Free Upgradation to Higher Version Yes - Maximum user handling capability - - Concurrent user handling capability - - Valid Licence copy to be provided Yes - Software supplied URL Link - 4/6 through Certifications Benchmarking of Software Products - - Installation and Demonstration true - List of items included in the package - - Hyper link to Data sheet - - No of Softwares sold 10000 - Number of User Referance no 1 with in Government Department email, phone no Of concerned authority where Software/Appliance installed 3 - Details of Government Department email, phone no Of concerned authority where Software/Appliance installed for above - - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 RAKESH KUMAR GUPTA 110017, 18-20, COMMUNITY CENTRE, SAKET, NEAR PVR, NEW DELHI 1 15 Required No ePBG Required No

office suite software - MS Office etc Average Turn Over of Last 3 Years 400 Lakh (s) Experience with Gov. Required 3 Year (s) Office Suite Software - MS Office Etc ( 309 ) Technical Specifications Specification Specification Name Values Allowed Values BASIC INFORMATION OF OFFICE SUITE SOFTWARE(GOLDEN) Product Type Proprietary Suites open source suites, Proprietary Suites Name of Software OfficeStd 2016 SNGL OLP C - Name of the OEM microsoft - OEM Model/Part No 021-10553 - Product Id of OEM 021-10553 - Date of Launch of Version 2016 - FEATURES & FUNCTIONALITY PARAMETERS(GOLDEN) Proprietary Suite microsoft office suite microsoft office suite, libre office, g suite, easy office, framework, gobe productive, ichitaro just suite 2008, microsoft office, omega office hd from ssuite office, word perfect office, soft maker office, hancom office suite think free office, wps office, yozo 1/5 office, Not Applicable, Adobe Open Source Suite Not Applicable apache open office, calligra suite, onlyoffice desktop editors, Not Applicable Type of licensing users based core based, users based, socket based, concurrent based, Open Source No of days Training Provided at Site 0 0, upto 5, 6 to 10, 11 to 20, 21 TO 30 Number of Years upto which Support is available from OEM/Franchise online 1 1, 2, 3, 5 FEATURES AND FUNCTIONALITY PARAMETERS(GENERIC) Word Processor true - Spreadsheet true - Presentation Tool true - Drawings and Diagrams true - Database Access false - One - Click Export to PDF false - Accessibility true - Support for many native languages false - Open XML File Format true - 3rd Party Add -ons false - XML File Filter Tool false - ActiveX Control false - Writing Support true - Advanced path editing tool false - Gradient and pattern tools false - Files and Printing true - Editing and Formatting true - Complex Documents true - Graphics true - Language Tools true - 2/5 Manage Projects true - Collaboration over Same Platform Suite true - Billing false - Schedule meetings & Events true - Queries false - Forms true - Reports true - Relationships false - Connects with macros Macro Recorder true - Advance data manipulation false - User Control by writing rich VBA code false - Compatability with SQL/MySQL Integration false - Built in Spell Checker Grammer & Style true - Utilities for manupulating and editing text false - Templates true - Formula Calculation Function false - Graphing Tool true - Pivot Table/Tables true - Micro programming language false - Visual Basic Language false - Slide Transitions false - Equation Editor true - Common Regional languages false - Themes false - Version Information true - Web Apps true - Azure Marketplace Connector false - Power View false - Scanned Images true - 3/5 Auto Discover true - Cached Exchange Mode Sync Slider false - Exchange Server Support false - Outlook Social Connector false - People Pane false - PRF Files false - HTML Files true - Live Preview true - Blogging true - Research Button false - SUPPORTED HARDWARE REQUIREMENTS PARAMETERS Processor Speed Required 1.2 - Hard Disk Space Required 10 - RAM Size required 2 - Operating Systems Supported yes - GENERIC PARAMETERS OF OFFICE SUITE SOFTWARE Valid Licence copy to be provided yes - Software supplied through url link - List of items included in the package 0 - Number of Devices Supported for Each User License 1 - Details of Government Department email, phone no Of concerned authority where Appliance installed for above cgwb, rsldc, rajasthan high court - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sumit saini 160017, SCO 111-113 sector 17b 309 15 EMD 4/5 Advisory Bank HDFC Bank EMD Percentage(%) 2.00 EMD Amount 92638 ePBG Required No

patient care beds for general use Patient Care Beds For General Use ( 4 ) Technical Specifications Specification Specification Name Values Allowed Values DIMENSIONS OF MATTRESS PLATFORM & FRAME Length of mattress platform & Overall length of bed >=2100 mm & <=2150 mm >= 1900 mm & <=2000 mm, >=1950 mm & <= 2050 mm, >=2000 mm & <=2100 mm, >= 2050 mm & <=2100 mm, >=2100 mm & <=2150 mm, >= 2150 mm & <= 2200 mm, >= 2200 mm & <= 2250 mm Width of mattress platform >920 mm to 950 mm 900 mm to 920 mm, >920 mm to 950 mm, >950 mm to 1000 mm, >1000 mm to 1050 mm Material of mattress platform surface CRCA Sheet CRCA Sheet, SS Height of mattress platform 617.5 - Mattress platform surface thickness 1.2 mm and above - Type of mattress platform Perforated Perforated, With Holes BED Overall length of Bed(in mm): 2100 - 1/3 FRAME section, dimensions, thickness and material MS ERW rectangular tube with 50 mmx30 mm or more, gauge 1.2 mm or more. - Frame width (in mm) 920 - Leg Shoe material 1 - HEAD AND LEG BOARD Height of Head board measured from mattress platform 450 - Material of Leg board and head board MS tubular SS laminated, MS tubular, Plastic Height of Leg board 450 - Pipe diameter of Head and Leg Boards 30 mm or more - Thickness of pipe of Head and Leg board 1.2 mm or more - MISC Maximum Load Capacity must be >= 150 Kg Yes - Painting Powder coated Powder coated Colour of Bed Grey - Provision of I.V. poles Holder Yes - Provision of Mosquito net pole Holder Yes - Other details Drawing available on Web. false - If Yes, Drawing No. SIS-2003 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Yogesh Kumar Rana 732127, 36 Bn BSF, 17 Mile Baishnabnagar, PO- Chamagram 4 15

hopper or tipper Average Turn Over of Last 3 Years 60 Lakh (s) Experience with Gov. Required 3 Year (s) Hopper Or Tipper ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Box body Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, - Main Engine Capacity (cc) 1034 - Make of Chassis - - Type of Chassis Frame - - Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) 1/5 Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 20 Speed, Max (Km/Hr) 70 - Main Engine Aspiration Natural Aspiration Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 27 Gradeability of Vehicle with load( %) 10.2 - Gradeability of Vehicle without load ( %) 10.3 - Ground Clearance (mm) 185 Wheel Base (mm) 1970 - Kerb Weight (Kg) 924 Gross Vehicle Weight (Kg) 1924 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - - Type of Front Axle and Suspension System - - Type of Rear Axle and Suspension System - - Type of BIS MARKED Vehicle Tyre Radial - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 5 - Type of Steering Manual Manual, Power Operated Turning Radius, Min (mm) 7700 Speed Governers yes - 2/5 ABS Fitted No - Front Vehicle Brake - - Rear Vehicle Brake - - Type of Clutch - - Tipping Angle (Degree) 45 Tipper Container cap acity/Volume(cubic metres) 1.7 Certification Chassis Certification ARAI/VRDE/ICAT No. - - Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 12 - No. Of Free Service (Nos) 5 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3675 - Width of Chassis (mm) 1460 - Height of Chassis (mm) 1460 - Size Of Front Tyres (mm) - - Size Of Rear Tyres (mm) - - Size of Wheel (mm) 4.82 Tipper body Pivot length (mm) 1650 - Tipper body Length (mm) 2450 - Tipper Body Height (mm) 710 - Overall Height of Tipper from Ground (mm) 1500 - Body Plate Thickness (mm) 2 Main Frame Thickness (mm) 3 Pneumatic System false - Hydarulic System true - 3/5 Tipping Hydraulic Cylinders(Make) - - Hydraulic System Driven by Power Pack Unit - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - Auxiliary Diesel Engine Transmission - - Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Dumping Height (mm) 590 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 4/5 1 Vishal Sheshrao Hiwale 444203, Municipal Council Administrative Building, Main Road, Gandhi Chauk, Shegaon 10 15 Required No ePBG Required No

power cord-Flexible electric cable Heating cables or Wire cotton Power for Heater Power Cord-Flexible Electric Cable Heating Cables Or Wire Cotton Power For Heater ( 1800 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformation of cable to IS: 694 for PVC insulated cable IS: 694 for PVC insulated cable, IS:9968 (Pt-1&amp;2) for elastomer insulated cable BIS Marked Yes - CM/L No 2832257 - CONSTRUCTIONAL Working voltage Upto 1100V - Type of insulation PVC PVC, Elastomer Type of sheath PVC PVC, Elastomer Sheated Yes Yes, No Outer cover material Non braided Non braided, Braided No. of cores 2 2, 3 Conductor material Copper - Size of the conductor 1.5 Sq. mm x 1 Core - Type of conductor Stranded - Type of service General - Type of flexible cord Unkinkable - Length of cable in a bundle (meter) 90 - 1/2 Cable bundle weight (kgs) 1.7 - CERTIFICATIONS Availability of Type test report from Central government/NABL/ILAC accridiated laboratory to prove conformity to the specification Yes - Test report number 09/02/6204/1001 - Test Report Date 18.06.2017 - Name of Lab FQC Uluslar Arasi - Address of the lab Istanbul - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ubaid Ul Rahman 121001, NIFM, Sector-48, Pali Road, Faridabad 121001 1800 15

Notebook Computers-laptop

Printer or photo Copier Paper Experience with Gov. Required 1 Year (s) Printer Or Photo Copier Paper ( 500 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 14490 : Latest Yes - Test Method as per IS: 1060 Yes - Size Size and Dimension of The Paper (W X L) in mm 210 x 297 210 x 297 Size of the Paper A4 A4 GSM of Paper 80 80 Quantity Number of Sheets per Ream 500 500 Physical Characteristics Brightness in % 95 95 Tensile Index MD in Nm/g 45 - Tensile Index CD in Nm/g 35 - Opacity in % 90 - Tear Index (Avg) in Nm.m²/g 5 - Smoothness for both sides (Bendtsen) in 250 - 1/3 ml/min Thickness in µm 100 - Moisture in % 5 - Stiffness MD 4 - Stiffness CD 3 - Surface Strength Dennison (Wax Pick) >= 12 A 12a - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 A Muruganandam 695551, Nr. Jersy Farm, Maruthamala, Vithura PO 500 15 Required No ePBG Required No

Refrigerated micro-centrifuge Experience with Gov. Required 7 Year (s) Refrigerated Micro-centrifuge ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values SET 1 Microprocessor controlled High speed Micro centrifuge Yes - Maximum permissible Speed (RPM): - - Relative Centrifugal Force (RCF), Max: 20, 000 x g to 22, 000 x g - Temperature Range - 10 degree C to +40 degree C - Refrigeration System: Must be CFC free. - Display for Speed, RCF, Temperature and Time parameters: Yes - Type of Display: LCD display LCD display, LED display Facility for short run operation Yes - Imbalance System and Selectable acoustic Alarms Yes - Running Modes available: soft/fast accelerate, decelerate Yes - 1/3 and break off mode Operation of equipment: By simple knob(s), By keypad operations By simple knob(s), By keypad operations Angle rotor Polypropylene/metallic 24 x (15/10) ml or Dual row rotor with same capacity/volume Yes - Lid Aerosol tight Polysulfone or equiv. Lid - Certification: US FDA, CE(European) US FDA, CE(European) Adopter for PCR tube sizes: 0.2 ml and 0.5 ml - Time Selection: 1 to 99 min or continuous - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pratima Srivastav 324001, JDB govt girls college, Nayapura Kota 1 15 Required No ePBG Required No

Electronic Lectern

Line Intractive UPS with AVR Line Intractive UPS With AVR ( 35 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Rating in KVA/min VAH capacity of battery (KVA/VAH) 1.0/800 1.0/800 Technology MOSFET-PWM MOSFET-PWM Type of battery SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 Rated Output (Volt) Single phase sinewave 230v AC, 50Hz Single phase sinewave 230v AC, 50Hz Degree of protection IP-21 IP-21 Inverter Efficiency (%) >/= 70% >/= 70% Warranty for the battery from the date of delivery 1 year - Warranty for Line Interactive UPS 1 Year 1 Year Installation and commissioning instructions Yes - CONSTRUCTIONAL Type of enclosure ABS - AC out put for printer (not through inverter) Yes Yes 1/4 Inverter out put socket AC out put for printer (not through inverter) 3 Three pin 3 Three pin FUNCTIONAL Total harmonic distorsion (%) </= 40% - Input (Volt) Single phase sinewave(160-280v) - Switching over time (Mili sec) Maximum 10 milli seconds - Overload Time (Minutes) >/= 10 minutes - Load power factor >/= 0.6 - Variation in AVR output in AC mode (%) AVR (Voltage regulation) output voltage in AC Mode 230 Volts +/-9%, 50 +/-3 Hz - Overload (%) >/=10% - Variation in output voltage in battery mode (%) (UPS output voltage in battery mode) 230 Volts +/- 10% - Variation on output frequency in battery mode (Hz) </=0.5 - PROTECTION Protection against (over discharge) discharge per 12v battery (Volt) 10.5 - Protection for outside input voltage range: If Input voltage goes outside the range 160 to 280 Volts, the system shall switch over to battery mode Yes - Protection against short circuit of UPS Yes - Protection for over voltage and over load Yes - REPORTS AND CERTIFICATIONS Damp heat Test at 45 degree, RH -95% for 2-cycle as per IS:9000 pt-5/sec-1 Yes - Dry heat Test at 45 degree for 16 Hrs as per IS:9000 pt-3/sec-5 Yes - 2/4 Cold Test as per IS:9000 pt-2/sec-4 Yes - Availability of the type test report from central Govt./NABL/ILAC Accredited Lab Yes - Type Test certificate no. and date NTS/OFFLINE UPS/06/DT-29.6.2017 - Name Of Lab NISAKI TECHNOLOGY SUPERVISES - Address of Lab BANGLORE - As per Meity (Government of India) guidelines UPS shall have valid BIS CRS certifications as applicable Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dhanesh E P 761052, ARMY AIR DEFENCE RECORDS, GOPALPUR MILITARY STATION, GANJAM, ODISHA-761052 35 25

Line Intractive UPS with AVR Line Intractive UPS With AVR ( 4 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Rating in KVA/min VAH capacity of battery (KVA/VAH) 2.0/800 2.0/800 Technology MOSFET-PWM MOSFET-PWM Type of battery SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 Rated Output (Volt) Single phase sinewave 230v AC, 50Hz Single phase sinewave 230v AC, 50Hz Degree of protection IP-21 IP-21 Inverter Efficiency (%) >/= 70% >/= 70% Warranty for the battery from the date of delivery 1 year - Warranty for Line Interactive UPS 1 Year 1 Year Installation and commissioning instructions No - CONSTRUCTIONAL Type of enclosure ABS - AC out put for printer (not through inverter) Yes Yes 1/4 Inverter out put socket AC out put for printer (not through inverter) 3 Three pin 3 Three pin FUNCTIONAL Total harmonic distorsion (%) </= 40% - Input (Volt) Single phase sinewave(160-280v) - Switching over time (Mili sec) Maximum 10 milli seconds - Overload Time (Minutes) >/= 10 minutes - Load power factor >/= 0.6 - Variation in AVR output in AC mode (%) AVR (Voltage regulation) output voltage in AC Mode 230 Volts +/-9%, 50 +/-3 Hz - Overload (%) >/=10% - Variation in output voltage in battery mode (%) (UPS output voltage in battery mode) 230 Volts +/- 10% - Variation on output frequency in battery mode (Hz) </=0.5 - PROTECTION Protection against (over discharge) discharge per 12v battery (Volt) 10.5 - Protection for outside input voltage range: If Input voltage goes outside the range 160 to 280 Volts, the system shall switch over to battery mode Yes - Protection against short circuit of UPS Yes - Protection for over voltage and over load Yes - REPORTS AND CERTIFICATIONS Damp heat Test at 45 degree, RH -95% for 2-cycle as per IS:9000 pt-5/sec-1 Yes - Dry heat Test at 45 degree for 16 Hrs as per IS:9000 pt-3/sec-5 Yes - 2/4 Cold Test as per IS:9000 pt-2/sec-4 Yes - Availability of the type test report from central Govt./NABL/ILAC Accredited Lab Yes - Type Test certificate no. and date R-85002828, 04/06/2016 - Name Of Lab BIS, STQC-ETDC (GOVT. OF INDIA) - Address of Lab BIS DELHI, STQC-ETDC (GOVT. OF INDIA), MOHALI, PUNJAB - As per Meity (Government of India) guidelines UPS shall have valid BIS CRS certifications as applicable Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dhanesh E P 761052, ARMY AIR DEFENCE RECORDS, GOPALPUR MILITARY STATION, GANJAM, ODISHA-761052 4 25

Desktops Desktops ( 3 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel Intel Processor Generation 7th 7th Processor Intel Core i7-7700 (3.6 GHz, 8 MB Cache, 4 Cores) Intel Core i7-7700 (3.6 GHz, 4 Cores) Motherboard Chipset Intel Q270 As per GeM Catalogue. Expansion Slots (PCIe x 1) (Number) 1 - Expansion Slots (PCIe x 4) (Number) 0 - Expansion Slots (PCIe x 16) (Number) 1 - Graphics Graphics Type Integrated - Graphic Memory N/A - Operating System Operating System (Pre-Loaded) Windows 10 Professional under Microsoft Shape the Future Program Windows 10 Profession al, Linux, DOS, Windows 10 Home, Windows 10 Professional under Microsoft Shape the Future Program RAM Type of RAM DDR 4 - RAM Size (GB) 8 8 1/3 RAM Expandability upto (GB) 32 32 RAM Speed (MHz) 2400 - Storage Hard Disk (GB) 1000 500, 1000, 2000 Cabinet Cabinet Tower - Cabinet Volume (Litres) - - Internal Bays 2 - External Bays (Number) 2 - DIMM Slots (Number) 4 - Connectivity Wireless NA - Network Connectivity 10/100/1000 on board Integrated Gigabit Port - Ports USB Port 2.0 (Number) 4 - USB Port 3.0 (Number) 4 - Serial Port true - Parallel Port false - VGA true - HDMI true - Display Port true - Monitor Monitor Size (INCHES) 21.5 21.5 Monitor Resolution (PIXELS) 1920x1080 1366x768, 1920x1080, 3 200x1800, 3840 x 2160, 1440 x 900, 1600 x 900 Monitor Certification - - Power Power Supply (Watt) - - Minimum Power Efficiency(%) 85 - Certification ROHS Compliance Yes - BEE/Energy Star for the given Model true - Input Devices Mouse Optical - Keyboard Standard - Generic Optical Drive DVD R/W - Internal Speaker false - On Site OEM Warranty (Year) 3 3 * Bold specifications are the golden parameters. Consignees and Quantity 2/3 S.No. Consignee Address Quantity Delivery Days 1 Raghubir Singh 176052, HQ COMMANDER WORKS ENGINEER MILITARY ENGINEER SERVICE YOL CANTT 3 15

OEM Cartridge/Consumable Average Turn Over of Last 3 Years 100 Lakh (s) Experience with Gov. Required 10 Year (s) OEM Cartridge/Consumable ( 100 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand Samsung - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number Samsung MLT-D1043S Black Toner Cartridge - Corresponding Part number/code MLT-D1043S/XIP - Printer Model number/numbers for which Cartridge is suitable ML-1660, ML-1666, ML-1 670, ML-1675, ML-1860, ML-1865, ML-1865W, SC X-3201, SCX-3206W - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1500 - * Bold specifications are the golden parameters. 1/2 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ravindra Kumar 110066, Room no. 314 (S), Sewa Bhawan, R.K.Puram, New Delhi-110066 100 30

Scanning and Digitisation Service

Printer

Desktops

Meeting Table

revolving chair Revolving Chair ( 30 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type push back As per GeM Catalogue. Tilt Tension Adjustment true - Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest with lumber support of polypropylene at multilevel across back backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Adjustable Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black - Ergonomic Seat Design true Back type push back push back, height adjustable Backrest is made of two pcs injection Backrest is made of two pcs injection - 1/5 moulded frame moulded frame backrest has separate adjustable headrest true Seat type fixed fixed, sliding Seat is curved true - Locking mechanism true - Type of locking 3-Position Locking - Number of arm movement 2(up & down) 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon 2/5 Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material steel covered with polyurethane steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Pr oypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material pressed and moulded plywood with polypropylene cover pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 35 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 35 - Material of Fabric Back Cover mesh fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leathe rite, N.A Material of Fabric of Seat Cover foam laminated mesh fabrics foam laminated mesh fabrics, Mesh Fabrics, leatherite, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 220 gram - 3/5 DIMENSION Overall Chair Height ±15mm 670 As per GeM Catalogue. Backrest Height ±15mm 460 As per GeM Catalogue. Backrest Width ±10mm 410 410, 440, 480, 500, 520, 5 50, 650, 680, 700, 720 Seat Height ±15 mm 420 420, 450, 520 Seat Width ±10 mm 440 440, 550, 4 60 Seat Depth ±10 mm 400 400, 460, 420, 540 Thickness of M S Plate Joining the under structure with Seat 0.2 As per GeM Catalogue. Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 600 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 25 mm As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 25 mm As per GeM Catalogue. WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4- year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO 4/5 Green guard certification YES YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Monali Dey 753002, OFFICE OF THE PROJECT DIRECTOR, DUDA, CUTTACK NEAR COLLECTORATE PO :CHANDNICHOWK DISTRICT : CUTTACK PIN : 753002 ODISHA 30 15 Required No ePBG Required No

Steel Bookcases

Steel Bookcases

diesel generators- DG Sets Diesel Generators- DG Sets ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values OUTPUT CAPACITY RATING/PHASE Nominal Rated Capacity (KVA) 25 25 No of Phase - Single phase, Three Phase ENGINE Make of Engine - - Model Number of Engine - - Capacity of Engine (cc) - - Engine Power (kWm) - - ISI Marking to IS :10001 for engine true - Type of Engine cooling Air Cooled Air Cooled, Liquid Cooled Type of governer Mechanical Mechanical, Electronic Class of governer A1 A0, A1, A2 Number of cylinders (nos) 3 - No of Strokes (nos) 4 - Rated RPM of Engine (RPM) - 1500, 3000 Overload capacity for one hour for every 11 10 - 1/4 hours continuous running at full load (%) Specific Fuel Consumption (gm/kWh) - - Starting voltage (volt) 12 - ALTERNATOR AC GENERATOR(ALTER NATOR) Make - - AC GENERATOR(ALTER NATOR) model Number - - Rating of AC Generator (KVA) 25 - Power Factor of AC generator 0.8 - Efficiency at rated Power factor at 75% of full Load 88 - Compliance of Alternator to IS:13364(part-1) Yes - Type of alternator Brushless - Voltage Regulation Grade VG 1 - Alternator IP Rating IP 23 - Class of Insulation H - CONTROL PANEL Control Panel AMF AMF IP Rating of Control Panel IP 53 - ACOUSTIC ENCLOSURE Sheet Thickness 1.6 1.6, 1.8, 2, 1.2 Thickness of Foam 20 - Density of Foam for sound insulation 20 - Noise level at 1 meter (dB) 75 - BATTERY Battery Type & Specification Normal lead acid to IS: 7372 for motor vehicles - Battery capacity (Ah) - - No of batteries 1 - TEST REPORTS Availability of Type test report for Engine from Central govt/NABL/ILAC accredited laboratory Yes - Test Report number and date(Engine) - - Name and address of laboratory(Engine) - - 2/4 Availability of Type test report for Alternator from Central government/NABL/ILAC accredited laboratory Yes - Test Report number and date(Alternator) - - Name and address of laboratory(Alternator) - - DG set meet requirements of Enviro nmental(Protection) Rules 1986, in respect of noise and emission norms, as described in STC Yes - WARRANTY INSTALLATION & COMMISSIONING Warranty 3 Installation & Commissioning Without Installation With Installation, Without Installation Agreed to STC of the Product Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 RAJENDRA PATEL 530024, "DEEP BHAVAN" DIRECTORATE OF LIGHTHOUSES AND LIGHTSHIPS, BESIDES PORT WATER TANK NEAR NARSIMHANAGAR RYTUBAZ AR, SALIGRAMPURAM, VISAKHAPATNAM 2 15 EMD Required No ePBG Required No

pbx

Authentication, Authorization and Accounting (AAA) Server Average Turn Over of Last 3 Years 25 Lakh (s) Experience with Gov. Required 3 Year (s) Authentication, Authorization And Accounting (AAA) Server ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Specification AAA Server Type Appliance Based Appliance Based, Virtual Integration and Security Support from day 1 Wired and Wireless Wired, Wireless, Wired and Wireless Minimum Number of Concurrently Handled Device 4000 1000, 2000, 3000, 4000 Number of Concurrent Users 4000 1000, 4000 Users scalable upto upto 5000 upto 2000, upto 3000, upto 4000, upto 5000 Devices scalable upto (Devices are mixture of guest users, tenants, organization staff and machine end points) upto 5000 upto 2000, upto 5000 BYOD with Self-service authorization and device provisioning via Yes - 1/5 open network Machine Authentication (or an appropriate alternative) by adjoined Windows laptops/tablets allowing wireless connection before user logon Yes - Issue certificates to mobile devices like Tabs/iPads - to allow machine authentication for non-AD joined devices Yes - Built-in user database with per device/user credential management and Seamless backend integration with RADIUS, AD, LDAP Yes - Threat-Centric and conduct scan test for vulnerability assessment of Endpoint devices and control access based on endpoint’s threat score No - Intuitive user/device management and Unified device visibility and reporting Yes - Self-service 802 point 1X and guest access, MAC authentication for selective devices and Social Login Yes - Integrated AAA server with key policy definitions, Integration with external AAA server and CA server Yes - Integrate with existing user databases like Microsoft AD/LDAP/Certificate Authority Yes - Scalable to enforce device-specific settings for antivirus, firewall and OS patches No - 2/5 Enforce custom user and device privileges No - On Site OEM Warranty (Years) 3 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Noharlal Ghormare 400707, Administration Building, Sheva, Navi Mumbai 1 45 Required No ePBG Advisory Bank HDFC Bank ePBG Percentage(%) 10.00 Duration of ePBG required (Months). 38

OEM Cartridge/Consumable OEM Cartridge/Consumable ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand Kyocera - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Cyam - Ink/Toner/Drum Model number TK-899C - Corresponding Part number/code 1T02K0CSG0 - Printer Model number/numbers for which Cartridge is suitable ECOSYS FS C8520 - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 6000 - * Bold specifications are the golden parameters. Consignees and Quantity 1/2 S.No. Consignee Address Quantity Delivery Days 1 Sai Prashanth Maddipatla 282008, AOC AIR FORCE STATION AJIT NAGAR GATE KHERIA MOD AGRA - 282008 5 15

OEM Cartridge/Consumable OEM Cartridge/Consumable ( 6 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand Kyocera - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number TK-899K - Corresponding Part number/code 1T02K00SG0 - Printer Model number/numbers for which Cartridge is suitable ECOSYS FS C8520 - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 12000 - * Bold specifications are the golden parameters. Consignees and Quantity 1/2 S.No. Consignee Address Quantity Delivery Days 1 Sai Prashanth Maddipatla 282008, AOC AIR FORCE STATION AJIT NAGAR GATE KHERIA MOD AGRA - 282008 6 15

OEM Cartridge/Consumable OEM Cartridge/Consumable ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand Kyocera - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Yellow - Ink/Toner/Drum Model number TK-899Y - Corresponding Part number/code 1T02K0ASG0 - Printer Model number/numbers for which Cartridge is suitable ECOSYS FS C8520 - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 6000 - * Bold specifications are the golden parameters. Consignees and Quantity 1/2 S.No. Consignee Address Quantity Delivery Days 1 Sai Prashanth Maddipatla 282008, AOC AIR FORCE STATION AJIT NAGAR GATE KHERIA MOD AGRA - 282008 5 15

OEM Cartridge/Consumable OEM Cartridge/Consumable ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand Kyocera - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Magenta - Ink/Toner/Drum Model number TK-899M - Corresponding Part number/code 1T02K0BSG0 - Printer Model number/numbers for which Cartridge is suitable ECOSYS FS C8520 - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 6000 - * Bold specifications are the golden parameters. Consignees and Quantity 1/2 S.No. Consignee Address Quantity Delivery Days 1 Sai Prashanth Maddipatla 282008, AOC AIR FORCE STATION AJIT NAGAR GATE KHERIA MOD AGRA - 282008 5 15

Notebook Computers-laptop Experience with Gov. Required 2 Year (s) Notebook Computers-laptop ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel Intel Processor Generation 6 th 6 th Processor 1.6 GHz Dual-Core Intel Core i5 (Turbo boost upto 2.7GHz) with 3MB shared L3 cache 1.6 GHz Dual-Core Intel Core i5 (Turbo boost upto 2.7GHz) with 3MB shared L3 cache Graphics Graphics Type Integrated - Graphics Card Description 6000 - Graphics Memory (GB) SHAARED GB - Memory Type of RAM LPDDR3 on Board - RAM Size (GB) 8 8 RAM Expandable upto (GB) NA 8, 16, 32, 64, NA RAM Speed (MHz) 1600 - Storage Type of Hard Disk Drive SSD SSD Hard Disk Drive Size( GB) 128 128.0 Hard Disk Drive Speed null - 1/4 (rpm) Operating System Operating System Mac OS Sierra or Latest Mac OS Sierra or Latest Ports USB 3.0 or higher (No.) 2 - USB Type C Not-Available - VGA Port Not-Available - HDMI Port Not-Available - DISPLAY PORT Not-Available - Thunderbolt Port 1 - Connectivity Network Connectivity Ethernet Gigabit 10/100/1000 - Wi-fi Connectivity 802.11 a/b/g/n - Bluetooth 4.0 or higher - Display Display Type Non Touch - Display Size (Inch) 13 13 Display Resolution (Pixel) 1440 x 900 1366 x 768, 1440 x 900, 1920 x 1080, 2304 x 1440, 2560 x 1600, 2736 x 1824, 2880 x 1800, 3200 x 1800, 3840 x 2160 Certification BIS Registration under CRS of Meity Yes - BIS Registration no. - - BEE/Energy Star Certification - - ROHS Compliance Yes - Additional feature Finger Print Reader No - Webcam (HD or Better) Available - Miscellaneous Optical Drive not available - Keyboard Backlit - Trusted Platform Module Enabled Yes - Weight (With Battery) (Kg) 1.35 - Carry Case Not Included Included, Not Included Power Battery Type (Li-Ion/Li- Polymer) Built-in - Battery Back-up (Hours) 12 - Warranty Battery Warranty (Year) 3 1, 3 2/4 On Site OEM Warranty (Year) 3 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vishnu Vijayan 695581, IIITM-K BUILDING, TE CHNOPARK, KARYAVATTOM PO, TRIVANDRUM 1 15 EMD Required No ePBG Required No

fire proximity suit Average Turn Over of Last 3 Years 100 Lakh (s) Experience with Gov. Required 3 Year (s) Fire Proximity Suit ( 258 ) Technical Specifications Specification Specification Name Values Allowed Values Genric Conformity to EN Standard en 469 2005 level 2 with latest amendments for fire proximity suit coat and trouser suitable for class iii fire defined as radiant heat and pocket of flames fire proximity suit coat trouser to en 469 2005 fireman helmet to en 443 2008 type b fireman gloves to en 659 2008 fireman boots to en 15090 2012 and antiflash hood to en 13911 2004 also with ce marking for all items, en 469 2005 level 2 with latest amendments for fire proximity suit coat and trouser suitable for class iii fire defined as radiant heat and pocket of flames, en 443 2008 type b for fireman helmet, en 659 2008 for fireman gloves, en 15090 2012 for fireman boots, EN 13911:2004 for Antiflash Hood 1/7 Item Descriptions complete set cosisting fire proximity suit coat trouser fireman helmet type b fireman gloves fireman boots antiflash hood complete set cosisting fire proximity suit coat trouser fireman helmet type b fireman gloves fireman boots antiflash hood, fire proximity suit coat trouser, fireman helmet type b, fireman gloves, fireman boots, Antiflash Hood Educational Instructions (Supplier Has To Educate to End user) "The items are to be used at a close proximity to the Fire never exceeding a closeness of more than 1 meter from the Fire. They are NEVER to BE USED for FIRE ENTRY Purpose. How to use the fire suit about wearing and removing. How maintain the fire suit. Limitation of use of fire suit according to the user manual provided along with the fire suit Fire suit needs to be Inspected every time after use to identify if it suitable for deployment. The reason is that after Exposure to every Fire Accident the Fire Fighting suit may get damaged and hence, this may be render the Fire Proximity suit unsutiable for deployment till it is repaired . Wash care maintenance of Fire suit is strongly recommended. Ideally after every six months the Fire Suits should be sent back to the manufacture for Wash Care and Maintenance. This will ensure that the Fire Proximity suits are Clean and suitable for deployment after exposure to previous Fire Fighting activity. The Fire Fighting suits normally are N/A 2/7 recommended with a shelf life of 5 years from the date of manufacture and ideally should be replaced after this period. " Constructional Fire Proximity suit (Coat and Trouser) size Large (L) ( Suitable for person of height 164-176 cm, Chest Girth 96-104 cm, Waist Girth 92-100 cm) N/A Suit colour Navy Blue N/A Suit Fabric the fabric namely nomex kevlar or equivalent shall be used for manufacture of the suit the garment manufactures have to furnish the genuinity certificate test certificates issued by m s du pont or the manufacturer of the fibre for the fabric N/A Generic Fibre of suit outer shell layer contains fibre composition of para aramide meta aramide 2 antistatic etc gsm 190 minimum or para amarmide polybenzimdiazole 2 anti static gsm 190 minimum middle layer contains fibre composition of meta aramide para aramide ptfe N/A Fireman Helmet (Type B) sizes shall be as per clause 5 of Helment Adjustment of EN:443-2008, Bicomponent membrane, Lining Fabric contains fibre composition of:-Blend of Meta aramide ( or ) Blend of Modarylic yes N/A Fireman Gloves size 9 N/A Fireman boot size 9 N/A Firehood shall be Sufficiently elastic to N/A 3/7 manufactured in various sizes or be sufficiently elastic to be compitable with various head sizes and shape be compitable with various head sizes and shape Labelling Each set must be having LABLE attached and Instruction on the label. Improper process could modify the clothing features and protective levels, Keep clothing dry and clean in suitable place at ambient temperature and humidity, Do not expose it to heat or cold surface and to repair the clothing we recommend to use only materials like the ones used for the manufacturing of the clothing . No other materials must be used and repairs must be carried out only by an experienced staff or directly by the manufacturer .The clothing has been planned with high quality components . In spite of this protective features can be subject to degradation in the long run as a result of the condition of working place. Therefore it is not possible to fix the durability of the clothing but in any case, following exposure to a risk that might damage whatever components, the time frame is undecided. N/A Certification Approval All the Items (components) should be approved to relevant EN standards and should be supported with both "EC Type Examination N/A 4/7 Certificate"as per Article 10 & "EC Quality System certificate" as per Article 11 A or 11B as per EEC guidelines individually. Technical manual comprising of servicing details shall be supplied with system Yes N/A The firm shall furnish manufacturers ™ test certificate for the fabric, major components and main item on the basis of the test performed on the representative samples Yes N/A Availability of complete & satisfactory test Report from Central govt/NABL/ILAC accredited laboratory for individual components (as applicable) conforming to relevant EN standard Yes N/A Test report No. 521915/1 N/A Test Report date 01.10.2015 N/A Name of lab where test conducted BTTG, UK N/A Availabiility of CE certificate for individual item (component) genuinity of which to be verified from the certification agency Yes N/A Copy of test report and certifications to be furnished to the buyer on demand Yes N/A * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Lohit Goswami 781001, FIRE AND EMERGENCY SERVICES ASSAM HEADQUARTERS PANBAZAR GUWAHATI DISTRICT- KAMRUP METRO 258 30 5/7 (ASSAM) EMD Required No ePBG Required No

Desktops

Desktops

Desktops

Multifunction Machines

Prefab Hut/House of size 6.10 M X 19.52 M - As per GeM Drawing Prefab Hut/House Of Size 6.10 M X 19.52 M - As Per GeM Drawing ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Type of Prefab HUT/House With Verandah Conforming to GeM DRG. NO.118 (VERSION-2015) Without Verandah Conforming to GeM DRG. NO.112 (VERSION-2015), With Verandah Conforming to GeM DRG. NO.118 (VERSION-2015) Type of Roof of Prefab HUT/House Roof of corrugated prepainted galvanised steel sheet Roof of corrugated galvanised steel sheet, Roof of corrugated prepainted galvanised steel sheet Pre-fabricated Huts shall be manufactured by using Double skin insulated flat cement sheet board (asbestos fibre) panels for wall and CGI sheet roof Double skin insulated flat cement sheet board (asbestos fibre) panels for wall and CGI sheet roof Pre-fabricated huts having 2 doors - 8 windows - 7 fabricated steel trusses and without false ceiling. - Scope of supply (Offer Price to include all cost components) Supply, Installation, Testing and Commissioning of Hut/House Supply, Testing and Commissioning of Hut/House 1/10 Transpotations Freight charges Offer Prices are on Free Delivery at Consignee site basis. Offer Prices are on Free Delivery at Consignee site basis. Approval of Advance sample before Bulk Supply No Advance Sample After award of contract, Seller shall have to get Advance sample approved from Buyer before manufacturing starting Bulk supplies. Buyer shall approve provide list of modifications required within 10 days of offer of advance sample. If there is delay in approval of advance sample from Buyer side, the delivery period shall be regularized for the period of delay in sample approval., No Advance Sample Foundation for Prefab Hut Building of Foundation at site shall be the responsibility of the Consignee and the Seller shall Install Erect and Commission the structure on the foundation constructed upto plinth level by the Consignee. Building of Foundation at site shall be the responsibility of the Consignee and the Seller shall Install Erect and Commission the structure on the foundation constructed upto plinth level by the Consignee. Time Period for Completion of Erection work at site by Seller Within 60 days of the date of receipt of consignee's confirmation regarding completion of ground and foundation work Within 45 days of the date of receipt of consignee's confirmation regarding completion of ground and foundation work, Within 60 days of the date of receipt of consignee's confirmation regarding completion of ground and foundation work Payment Terms Bill/invoice to be submitted in two parts by seller (80% and 20%). Payment for initial 80% to be made within ten (10) days of receipt of goods by consignee. Bill for balance 20% to be raised by seller after Bill/invoice to be submitted in two parts by seller (80% and 20%). Payment for initial 80% to be made within ten (10) days of receipt of goods by consignee. Bill for balance 20% to be raised by seller after 2/10 completion of installation commissioning, and to be released by Buyer with in ten (10) days of issue of consignee receipt-cum- acceptance certificate after Successful installation Commissioning completion of installation commissioning, and to be released by Buyer with in ten (10) days of issue of consignee receipt-cum- acceptance certificate after Successful installation Commissioning Suitability structural stability completness of structures, the structure is intended for use in In wind condition of 55m/s, in Seismic zone V and ambient temperature of 0 degree C to 50 degree C. Huts should be structurally stable and suitable to meet severity of these climatic condition. In wind condition of 55m/s, in Seismic zone V and ambient temperature of 0 degree C to 50 degree C. Huts should be structurally stable and suitable to meet severity of these climatic condition. Type of glass fitted on windows/Ventilators Plain Pin head type, Plain DESIGN/MATERIAL OF WALL PANELS Design of wall panel As per GeM DRG. NO.121 & 123(VERSION-2015) - Wall made in sandwich panel system using 2 Numbers 10 mm thick cement flat sheets/boards (Asbestos free) as skins conforming to IS 14276 Latest as amended uptodate IS 14276 Latest as amended uptodate, Category 3 Type B of IS 14862:2000 latest as amended up to date Sandwich material - 27 mm gap in between wall skins to be filled with 27mm thick expanded polystyrene core having bulk density of 15 Kg/Cum conforming to IS 4671:1984 type I (Latest) - Panel Strengthened On all four sides By 'W' shaped pre- profiled steel section made from 0.63 GI steel sheet/coil - Cement sheet and expanded polystyrene core to be bonded together using bonding material PVA (polyvinyl acetate) based conforming to IS 4835/Latest, uniformly & fully applied on both sides of the expanded polystyrene cores to ensure proper bonding of the panels. No patching of adhesive - 3/10 will be accepted 'U' shaped ground track size (panels to be inserted one by one) 52.5mm X 35mm X 1.25mm made from GI steel sheet/coil - Bottom track to be fixed To the concrete platform at plinth level by suitable fastners screwed into PVC expandable Screw cap - Interlocking of wall panel(lengthwise) using cold-formed rectangular hollow steel section of size 50mm X 25mm X 1.25mm - Wall corners to be concealed With corner angle of 125mm X 125mm X 1.25mm made from GI steel sheet/Coil - Top of walls to be concealed With 'U' shaped top track of size 52.5mm X 35mm X 1.25mm made from GI steel sheet coil - Sellers are free to adopt higher sizes/reinforcement For better fitment or mating of components or for improved stability - ROOF & ROOF FRAME WORK Design of roof As per GeM DRG. NO.119(VERSION-2015) - Wall height at eaves and central gable 2750mm at eaves and 3360mm at central gable - Roof to be done with Corrugated prepainted galvanised steel sheets and prepainted galvanised steel sheet ridge cover with thickness of BMT 0.63mm conforming to IS 14246/Latest. Top coat of sheet shall be PVDE/Sillicon modified Polyester having thickness of 20 micron (Min) and Back coat shall be of Alkaloid epoxy or polyester having thickness of 7 micron(Min). A protection sheet (Polyethylene) shall also be provided on top coat of the sheet for Galvanised corrugated sheets of 0.63mm thickness conforming to IS 277/Latest having min. 275gsm galvanising, Corrugated prepainted galvanised steel sheets and prepainted galvanised steel sheet ridge cover with thickness of BMT 0.63mm conforming to IS 14246/Latest. Top coat of sheet shall be PVDE/Sillicon modified Polyester having thickness of 20 micron (Min) and Back coat shall be of Alkaloid epoxy or polyester having thickness of 7 4/10 transport. The durability of paint coating shall correspond to class 1 as per table -1 of IS :14246:2013. (Colour shade of exterior finish shall be Olive Green of colour code RAL6028.The Seller shall furnish manufacture's test certificate indicating material of coating and suitablity of exterior application. micron(Min). A protection sheet (Polyethylene) shall also be provided on top coat of the sheet for transport. The durability of paint coating shall correspond to class 1 as per table -1 of IS :14246:2013. (Colour shade of exterior finish shall be Olive Green of colour code RAL6028.The Seller shall furnish manufacture's test certificate indicating material of coating and suitablity of exterior application. Roof to be laid over Frame work of trusses - columns and purlins fixed using suitable fasteners like 'J' hooks with bitumen washers and nuts/bolts. - Size of Ridge cover to be fixed on top junction of roof of same materail as Roof 225 X 225 X 0.63 mm - Roof slope 1:4(approx) - Purlin to be provided on the roof Of size 66 X 33 X 2.9mm at the eaves and at gable roof extension(out side the structure) - Roof projection in case of no verandah(in front) Min. 400mm from the eaves wall and 300mm from gable walls - Roof projection As per GeM DRG. NO.109 & 119(VERSION-2015) - Purlin provided on the trusses At a max. pitch of 1000 mm or less and are fixed and flushed with the top level of trusses with the help of 5mm thick MS end plates and 10mm nuts/bolts - Column to be welded With 5mm thick MS end plate and to be fixed to the foundation bolts - 5/10 through this plate Trusses/purlins to be fixed Using 5mm thick MS end plates and 10 mm nuts and bolts - Trusses (supported on truss column) provided at a distance of 2440 mm - Trusses and Purlin to be made of Rectangular hollow sections of size 66 X 33 X 2.9 mm conforming to IS 4923/Latest duly ISI marked - Truss columns to be made of Rectangular hollow steel sections of size 96 X 48 X 3.2mm conforming to IS 4923/Latest duly ISI marked - Roof structural frame work As per GeM DRG. NO.119-120a-120b & 121(VERSION-2015) - VERANDAH & DOORS Width of verandah 1525 mm 1525 mm, No verandah Clear height of verandah 2280 mm - Verandah roof to be made of GI (continuous provided along the roof of the structure) - Purlin provided to verandah structure To be made of rectangular hollow steel sections of size 66x33x2.9mm and are fixed and flushed with the top level of the truss extension member with the help of 5mm thick MS end plates and 10mm nut/bolts. - Verandah columns to be made of rectangular hollow steel sections of size 66x33x2.9mm fixed with help of 5mm thick MS end plates and 10mm nuts/bolts at top level and at leveled base by using 5mm thick MS end plates and 4nos. 12mm dia-305mm long foundation bolts. - Door frame to be made from Pressed steel four sided frame using CR steel of - 6/10 size 75x45x1.5mm thickness confmg. to IS 513/latest Door Hinges 4nos. 100mm MS hinges welded on to the frame - Door shutter made of 30 mm thick flush door confmg. to IS 2202(part-1)/latest - Door shutter to be fixed with Door frame with 4nos. MS oxidized hinges of 100mm length - Door aldrops To be provided 2nos. MS oxidized of 300mm length - Door tower bolts MS oxidized of size 200mm at top and 100mm at bottom on each shutter - Door handles 2nos. 150mm long handles - WINDOWS & VENTILATORS Windows As per GeM DRG. NO.125(VERSION-2015) - Ventilators As per GeM DRG. NO.126(VERSION-2015) - Frame material of windows/ventilators Made from pressed steel using CR steel of size 75 X 45 X 1.5mm (thickness) conforming to IS 513/Latest - Hinges for windows 6 Nos. 75mm MS butt hinges welded on to the frame - Hinges for ventilators 2 Nos. 75mm MS butt hinges welded on to the frame - Grills for Windows/Ventilators Made from MS square bar of 8mm having equal spacing of 125mm - Shutter material for windows/ventilators Fabricated type Made out of steel rectangular hollow box profile of 1.25mm thick as per drawing, Fabricated type Each window shutter consist of MS oxidized handle of 150mm - 2 Nos. MS oxidized tower bulls of 100mm and 1 No. - 7/10 window stay. Each ventilator shutter(Internal) consist of 1 No. stay hook - Glass sheet for windows/ventilators Of 4mm thickness to be fixed using glass putty - ELECTRICAL WIRING & FITMENTS Electrical points/sockets/fan regulators/gang way boxes To be provided ISI mark as per table in annexure B - Main switch board Comprising of SP/DP MCBs to be supplied in addition - cables and PVC conduit Adequate quantity to be provided - Electrical installation/co mpleteness Seller is fully responsible for wiring etc. (except light fittings) - Fan regulator Conforming to IS 11037/Latest - COLOUR & FINISH Corrugated GI sheets and ridge cover Confmg. to IS 277/Latest and have a min. galvanizing coating of 275gsm - Other GI profiles Confmg. to IS 277/Latest and have a min. galvanizing coating of 120gsm - MS steel members To be supplied with one coat of red oxide primer coating - Internal wall panels To be one coat of cement primer and two coats of white oil bound distemper - External wall panels To be one coat of cement primer and two coats of enamel paint - Colour/Shade of paint As per buyer's choice - Primers to be used As per buyer's choice - Paints to be used As per buyer's choice - WARRANTY Warranty period in number of years 1 1, 2, 3 CERTIFICATION Test reports to be furnished to buyer's on demand YES - * Bold specifications are the golden parameters. 8/10 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajeev Sharma 735133, SHQ BSF RANINAGAR, JALPAIGURI 2 30

Vehicle Hiring Service (Long Term)

Desktops

All in one All In One ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel - Processor Generation 7th 7th Processor Intel Core i5-7400 (3.0 GHz, 6 MB Cache, 4 Cores) Intel Core i5-7400 (3.0 GHz, 4 Cores) Chipset Chipset Intel B250 - Graphics Graphics type Integrated - Graphic Card Description Intel HD Graphics 630 - Storage Type of Hard disk drive SATA SATA, SSD, Fusion Hard Disk Drive Size (GB) 1000 1000 Hard disk drive speed (RPM) 7200 - RAM Type of RAM DDR4 - RAM Size (GB) 8 8 RAM Expandability Upto (GB) 32 32 Ram speed (MHz) 2400 - Operating System Operating system Windows 10 Windows 10 1/3 Professional Professional OS Certification Windows - Display Display Size (Inch) 21.5 21.5 Type of Display Non Touch Touch, Non Touch display resolution (Pixels) 1920 x 1080 1920 x 1080 TCO Certification Yes - Ports USB Port 2.0 (No.) 0 - USB Port 3.0 (No.) 6 - VGA Port Not-Available - HDMI Port Not-Available - Thunderbolt Port (No.) Not-Available - Display Port Available - Input Devices Keyboard Standard with USB Interface - Mouse Optical Scroll with USB Interface - Audio Integrated Stereo Sound with internal speakers & Mic. - Connectivity Wi-fi Connectivity 802.11 ac - Bluetooth Connectivity 4.0 or higher - LAN Port Integrated Gigabit Ethernet 10/100/1000 - Certification BIS Registration under CRS of Meity Yes - BIS Registration no - - Certifications Available Energy Star - ROHS Compliance Yes - Power Maximum Wattage (Watts) 150 - Power Efficiency (%) Minimum 80 - Others Webcam Full HD - DVD R/W Available - Optical drive Integrated - Stand Standard - On Site OEM Warranty (Year) 3 3 * Bold specifications are the golden parameters. Consignees and Quantity 2/3 S.No. Consignee Address Quantity Delivery Days 1 Nikhil Mohan 147001, 10 MECH INF, MES GATE, Patiala Cantt 1 15 Required No ePBG Required No

Submersible Cable for Submersible Pumps (Insulated or covered cable) Submersible Cable For Submersible Pumps (Insulated Or Covered Cable) ( 500 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Cable Type THREE CORE FLAT CABLES WITH PVC INSULATION AND SHEATHED with multistrand flexible Copper Conductor FOR Submersible Pumps (FORMAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C) duly ISI marked to IS:694 latest TWO CORE FLAT CABLES WITH PVC INSULATION AND SHEATHED with multistrand flexible Copper Conductor FOR Submersible Pumps (FOR MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C) duly ISI marked to IS:694 latest, THREE CORE FLAT CABLES WITH PVC INSULATION AND SHEATHED with multistrand flexible Copper Conductor FOR Submersible Pumps (FORMAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C) duly ISI marked to IS:694 latest CONSTRUCTION Size of Cable (Sqmm) 6 6 Number of cores 3 - 1/3 Material of conductor Copper(EC grade) - Shape of conductor Stranded - Insulation Type C — Heat- resistant cables (HR) as per IS 5831 latest - Sheath "Type ST2 — cables sheathed with 85°C HRPVC compound to IS 5831 latest" - In addition to marking requirements as per relevant specification, sequential marking for length, Size of the cable, Type of the cable shall be embossed on every metre of the cable YES - standard cable length in a Coil/Reel 100 - Part length which can be supplied by seller 10 - CERTIFICATION BIS marked YES - BIS certificate number - - Availability of Type test report from Central government/NABL/ILAC accridiated laoratory to prove conformity to the specification for minimum and maximum ratings YES - Type Test Certificate No - - Type Test Certificate date - - Name of Lab - - Address of Lab - - Test Report to be furnished to the buyer on demand YES - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Neha Mishra 735215, AIR OFFICER COMMANDING 16 WG, AIR 500 20 2/3 FORCE STATION HASIMARA

Line Intractive UPS with AVR Average Turn Over of Last 3 Years 5 Lakh (s) Experience with Gov. Required 3 Year (s) Line Intractive UPS With AVR ( 13 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Rating in KVA/min VAH capacity of battery (KVA/VAH) 1.0/800 1.0/800 Technology MOSFET-PWM MOSFET-PWM Type of battery SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 Rated Output (Volt) Single phase sinewave 230v AC, 50Hz Single phase sinewave 230v AC, 50Hz Degree of protection IP-21 IP-21 Inverter Efficiency (%) >/= 70% >/= 70% Warranty for the battery from the date of delivery 1 year - Warranty for Line Interactive UPS 2 Years 2 Years Installation and commissioning instructions Yes - CONSTRUCTIONAL Type of enclosure Mild steel - AC out put for Yes Yes 1/3 printer (not through inverter) Inverter out put socket AC out put for printer (not through inverter) 3 Three pin 3 Three pin FUNCTIONAL Total harmonic distorsion (%) </= 40% - Input (Volt) Single phase sinewave(160-280v) - Switching over time (Mili sec) Maximum 10 milli seconds - Overload Time (Minutes) >/= 10 minutes - Load power factor >/= 0.6 - Variation in AVR output in AC mode (%) AVR (Voltage regulation) output voltage in AC Mode 230 Volts +/-9%, 50 +/-3 Hz - Overload (%) >/=10% - Variation in output voltage in battery mode (%) (UPS output voltage in battery mode) 230 Volts +/- 10% - Variation on output frequency in battery mode (Hz) </=0.5 - PROTECTION Protection against (over discharge) discharge per 12v battery (Volt) 10.5 - Protection for outside input voltage range: If Input voltage goes outside the range 160 to 280 Volts, the system shall switch over to battery mode Yes - Protection against short circuit of UPS Yes - Protection for over voltage and over load Yes - REPORTS AND CERTIFICATIONS Damp heat Test at 45 degree, RH -95% for 2-cycle as per IS:9000 pt-5/sec-1 Yes - Dry heat Test at 45 Yes - 2/3 degree for 16 Hrs as per IS:9000 pt-3/sec-5 Cold Test as per IS:9000 pt-2/sec-4 Yes - Availability of the type test report from central Govt./NABL/ILAC Accredited Lab Yes - Type Test certificate no. and date ISO 9001:2008 - Name Of Lab American Systems Registrar - Address of Lab U.S.A - As per Meity (Government of India) guidelines UPS shall have valid BIS CRS certifications as applicable Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Nikhil Mohan 147001, 10 MECH INF, MES GATE, Patiala Cantt 13 15 Required No ePBG Required No

Desktops

tricycle or rickshaw Average Turn Over of Last 3 Years 10 Lakh (s) Experience with Gov. Required 3 Year (s) Tricycle Or Rickshaw ( 4 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Driving Mechanism Pedestal Chain Pedestal Chain Length of Tricycle (mm) 2000 Length of Cart (mm) 1500 1500 Width of Cart (mm) 1000 1000 Height of Cart (mm) 300 300 Number of Plastic Containers with lid and handle (Nos) 8 8 Capacity of the each Container (Litres) 30 Material of the Container and Lid Virgin HDPE Virgin HDPE, Virgin Polypropylene Material of Handle of container - - Loading Capacity of the Tricycle (Kg) - - Certification Parameters Manufacturer Drawing No. - - Constructional Frame Structure Made of MS Tubes Made of MS Tubes 1/4 Parameters Diameter of MS Tube (mm) 28.6 Thickness of MS Tube (mm) 1.63 Cart Frame Material MS Angle of size 25 x 25 x 3 mm MS Angle of size 25 x 25 x 3 mm Material of Bottom Plate of Cart Mild steel plate Mild steel plate Thickness of Bottom Plate of Cart (mm) 0.7 Holes in Bottom Plate of Cart Having 12 mm diameter holes at a distance of 200 mm square Matrix - Lengthwise Number of Stiffeners below the Plateform to support the MS Plate (Nos) 3 - Widthwise Number of Stiffeners below the Plateform to support the MS Plate (Nos) 1 - Stiffener Material M S Angle of size 25 x 25 x 3 mm M S Angle of size 25 x 25 x 3 mm Finish of Handle Nickel and Chrome Plated - Finish of Chain Wheel Nickel and Chrome Plated - Finish of Crank Nickel and Chrome Plated - Front Rim Thickness (mm) 3.2 - Number of Front Wheel (Nos) 1 - Type of Front Wheel Puncherless Rubberised Wheel Puncherless Rubberised Wheel, Tyre Tube Wheel Front Rim Diameter (mm) 700 - Front Rim Width (mm) 38 - Number of Spikes in Rear Wheel (Nos) 16 - Diameter of Spike of Front Wheel (mm) 1.6 Number of Rear Wheels (Nos) 2 2 2/4 Type of Rear Wheels Puncherless Rubberised Wheel Puncherless Rubberised Wheel Rear Rim Diameter (mm) 400 Rear Rim Width (mm) 80 Rear Rim Thickness (mm) 20 - Number of Spikes in Front Wheel (Nos) 32 - Thickness of Spike of Rear Wheel (mm) 3.2 Daimeter/Width of Spike in Rear Wheel (mm) 1.6 - Support Details of Rear Wheels - - Minimum Wall thickness of the Plastic Container and Lid (mm) 4 Maximum Ash content of the container and Lid when tested as per Annex D of IS 14887/2014 (%) 1 Pretreatment Two coats of red oxide after phsphating before painting Two coats of red oxide after phsphating before painting Colour of the Frame - - Paint Ennameled Paint Powder Coating, Ennameled Paint Colour of the Cart - - Manufacturer 's Name Marked on the Tricycle Yes - Year of Manufacturing Marked on the Tricycle Yes - Finish of Rim Nickel and Chrome Plated - Colour of the Container and Lid - - Accessories Parameters Bell Yes - Two Reflectors at back Yes - Type of Reflector Plastic - 3/4 Lock for locking the Tricycle Yes - Tool Kit Yes - First Aid Box Yes - Tricycle Seat with Cover Yes - Hangers for broom and wiper Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sudam Yashawant Mhase 410201, Karjat Municipal Council, Tal - Karjat, Dist - Raigad 4 15 Required No ePBG Required No

dot matrix printers Dot Matrix Printers ( 33 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Number of Pins (Nos.) 9 9, 24 Number of Columns (Nos.) 80 80, 136 Print Speed at Draft Mode at 10 cpi (cps) 10 Print Speed at High Speed Draft Mode at 10 cpi (cps) 300 Print Speed at NLQ Mode at 10 cpi for 9 pin only (cps) 10 - Print Speed at LQ Mode at 10 cpi for 24 pin only (cps) 12 - Input Data Buffer Capacity (KB) 100 50, 100 Auto share feature Yes - Parallel Port Available - USB Available - Network Interface ( LAN ) Not Available - Over all dimensions 147mm(H)x433mm(w) - 1/3 (Length x Width x Height) (mm) x379mm(d) Weight (Kgs) 5.7 - Power Supply 230 V AC - Power consumption- max in Print Mode (watts) 12 - Power consumption- max in Standby Mode (watts) 0.9 - BIS Registration under CRS of Meity Yes - BIS Registration Number - - Availability of test reports from Central Govt/NABL/ILAC accredited Lab showing conformity to the specification Yes - If yes, Test Report Number - - If Yes, Test Report date - - If Yes, Name of Test lab - - If yes, Address of Test Lab - - On Site OEM Warranty (Years) 1 1, 2 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 K.N.Tiwary 822101, Supdt. Of Post Offices, Palamau 33 15 EMD Required No ePBG Required No

Printer or photo Copier Paper Printer Or Photo Copier Paper ( 560 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 14490 : Latest Yes - Test Method as per IS: 1060 Yes - Size Size and Dimension of The Paper (W X L) in mm 297 X 420 210 x 297, 297 X 420 Size of the Paper A3 A4, A3 GSM of Paper 90 75, 80, 90, 95 Quantity Number of Sheets per Ream 500.0 500 Physical Characteristics Brightness in % 90.0 Tensile Index MD in Nm/g 45.0 - Tensile Index CD in Nm/g 35.0 - Opacity in % 90.0 - Tear Index (Avg) in Nm.m²/g 6.0 - Smoothness for both sides (Bendtsen) in ml/min 250.0 - 1/2 Thickness in µm 100.0 - Moisture in % 4.5 - Stiffness MD 3.0 - Stiffness CD 2.0 - Surface Strength Dennison (Wax Pick) >= 12 A 12 A - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sulabh Sethi 482001, GRENADIERS REGIMENTAL CENTRE NEAR GRENADE CHOWK RAMPUR JABALPUR 482001 560 15 Required No ePBG Required No