Loading
Loading…
Loading…
1,231 results • Latest
Notebook Computers-laptop Experience with Gov. Required 7 Year (s) Notebook Computers-laptop ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel Intel, AMD Processor Generation 7 th 6 th, 7 th, 8 th Processor Intel Core i3-7100U (2.4 GHz, 3 MB cache, 2 cores) As per GeM Catalogue. Graphics Graphics Type Integrated - Graphics Card Description Intel HD Graphics - Graphics Memory (GB) NA - Memory Type of RAM DDR 4 - RAM Size (GB) 8 4, 8, 16, 32 RAM Expandable upto (GB) 32 8, 32, 64, NA RAM Speed (MHz) 2400 - Storage Type of Hard Disk Drive SATA SATA, SSD, Fusion, PCIe- based onboard SSD Hard Disk Drive Size( GB) 1000 128, 256, 512, 500, 1000, 2000 Hard Disk Drive Speed (rpm) 7200 - 1/4 Operating System Operating System Windows 10 Professional Windows 10 Home, Windows 10 Professional, Linux, Mac OS Sierra or Latest, DOS Ports USB 3.0 or higher (No.) 2 - USB Type C Not-Available - VGA Port Available - HDMI Port Available - DISPLAY PORT Not-Available - Thunderbolt Port Not-Available - Connectivity Network Connectivity Ethernet Gigabit 10/100/1000 - Wi-fi Connectivity 802.11 a/b/g/n - Bluetooth 4.0 or higher - Display Display Type Non Touch - Display Size (Inch) 15.6 Display Resolution (Pixel) 1920 x 1080 1366 x 768, 1440 x 900, 1920 x 1080, 2304 x 1440, 2560 x 1600, 2736 x 1824, 2880 x 1800, 3200 x 1800, 3840 x 2160 Certification BIS Registration under CRS of Meity Yes - BIS Registration no. - - BEE/Energy Star Certification - - ROHS Compliance Yes - Additional feature Finger Print Reader No - Webcam (HD or Better) Available - Miscellaneous Optical Drive Available - Keyboard Standard - Trusted Platform Module Enabled Yes - Weight (With Battery) (Kg) 1.93 - Carry Case Included Included, Not Included Power Battery Type (Li-Ion/Li- Polymer) Built-in - Battery Back-up (Hours) 5 - Warranty Battery Warranty 3 1, 3 2/4 (Year) On Site OEM Warranty (Year) 3 1, 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pratima Srivastav 324001, JDB govt girls college, Nayapura Kota 2 15
plastic moulded chair Plastic Moulded Chair ( 160 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC TYPE OF CHAIR PLASTIC MOULDED SEAT CUM BACK WITH SUPPORT STRUCTURE SINGLE PIECE PLASTIC MOULDED, PLASTIC MOULDED SEAT CUM BACK WITH SUPPORT STRUCTURE, SEPERATE PLASTIC MOULDED SEAT AND BACK FITTED ON SUPPORT STRUCTURE Seat cushion Without With, Without Back Cushion Without With, Without Conformity to Indian Standard IS 13713- Latest false - Plastic Material ABS PLASTIC (Acylonitrile Butadiene Styrene) FILLED THERMOPLASTI C, UNFILLED THERMOPLASTIC, FILLE D THERMOSETTING PLASTIC, UNFILLED THERMOSETTING PLAS TIC, POLYPROPELENE, PV C (Polyvinyl Chloride), ABS PLASTIC (Acylonitrile Butadiene Styrene) ARMS With arms With arms, Without arms 1/3 DIMENSION & WEIGHT Seat Width in mm (+/- 5 mm) 365 As per GeM Catalogue. Seat Depth in mm (+/- 5 mm) 340 As per GeM Catalogue. Chair Height in mm (+/- 10 mm) 790 As per GeM Catalogue. Chair Dimensions Not Conforming To IS 3663 Latest - Weight of Chair (IN Grams) 500.0 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) No Cushion 40, 45, 50, 55, 60, 65, 70, 7 5, No Cushion Density of PU Foam in KG per CuM No Cushion 40, No Cushion Thickness of Polyurethane Foam Used in Backrest in mm (+/- 2 mm) No cushion 40, No cushion PERFORMANCE Stability of the Chair Conforming To IS 5416 (Part 2) - Strength of the Chair Conforming To IS 5416 (Part 1) - Maximum Ash Content is Not more than 1% in Conformity test as per Annex D of IS: 14887 (Latest) Complied that Ash content is less than 1% - UV Resistance Test - % of Tensile strength retention after 192 hours exposure as per ASTM D2562 -99 Table 1- Cycle Number 2 is more than 50 % Complied Minimum 50% tensile strength retained after exposure as per test - Support/Under Structure Support/Under Structure Sigle Moulded Piece No Support Structure SS 202 STRUCTURE, SS 304 STRUCTURE, Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum, Sigle Moulded Piece No Support Structure Support Structure Finishing Sigle Moulded Piece No Support Structure Stove enameled Paint, Powder coated, chrome, epoxy polyester, synthetic enamel, Natural Steel Finish, Sigle Moulded 2/3 Piece No Support Structure CERTIFICATION Test reports to be furnished to buyer on demand YES - MISC Colour Off White - WARANTEE PERIOD WARANTEE PERIOD IN NUMBER OF YEARS 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sulabh Sethi 482001, GRENADIERS REGIMENTAL CENTRE NEAR GRENADE CHOWK RAMPUR JABALPUR 482001 160 15 Required No ePBG Required No
plastic moulded chair Plastic Moulded Chair ( 40 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC TYPE OF CHAIR PLASTIC MOULDED SEAT CUM BACK WITH SUPPORT STRUCTURE SINGLE PIECE PLASTIC MOULDED, PLASTIC MOULDED SEAT CUM BACK WITH SUPPORT STRUCTURE, SEPERATE PLASTIC MOULDED SEAT AND BACK FITTED ON SUPPORT STRUCTURE Seat cushion Without With, Without Back Cushion With With, Without Conformity to Indian Standard IS 13713- Latest false - Plastic Material FILLED THERMOPLASTI C, UNFILLED THERMOPLASTIC, FILLE D THERMOSETTING PLASTIC, UNFILLED THERMOSETTING PLAS TIC, POLYPROPELENE, PV C (Polyvinyl Chloride), ABS PLASTIC (Acylonitrile Butadiene Styrene) FILLED THERMOPLASTI C, ABS PLASTIC (Acylonitrile Butadiene Styrene) ARMS With arms With arms, Without arms 1/4 DIMENSION & WEIGHT Seat Width in mm (+/- 5 mm) 345, 365, 385, 400, 415, 4 25, 455, 475, 500, 510, 52 0, 530, 540, 550, 560, 570 As per GeM Catalogue. Seat Depth in mm (+/- 5 mm) 340, 360, 380, 410, 4 20, 430, 440, 450, 460, 47 0, 480, 490, 520, 560 As per GeM Catalogue. Chair Height in mm (+/- 10 mm) 500, 750, 770, 7 90, 805, 825, 840, 850, 87 0, 890 As per GeM Catalogue. Chair Dimensions Conforming To IS 3663 (Latest) - Weight of Chair (IN Grams) 100 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 45, 50, 55, 60, 65, 70, 75, N o Cushion 40, 45, 7 5, No Cushion Density of PU Foam in KG per CuM 40, No Cushion 40, No Cushion GSM/Thickness of Fabric (Gram per Sq Meter) 140gsm 120gsm, 140gsm, 230gs m, 240gsm, N.A Thickness of Polyurethane Foam Used in Backrest in mm (+/- 2 mm) 45, No cushion Fabric Material composition used for Cushion Cover 100% polyester - PERFORMANCE Stability of the Chair Conforming To IS 5416 (Part 2) - Strength of the Chair Conforming To IS 5416 (Part 1) - Maximum Ash Content is Not more than 1% in Conformity test as per Annex D of IS: 14887 (Latest) Complied that Ash content is less than 1% - UV Resistance Test - % of Tensile strength retention after 192 hours exposure as per ASTM D2562 -99 Table 1- Cycle Number 2 is more than 50 % Complied Minimum 50% tensile strength retained after exposure as per test - Support/Under Structure Support/Under Structure SS 202 STRUCTURE, SS 304 STRUCTURE, Mild Steel Pipe of diameter 25 mm and wall SS 202 STRUCTURE, Mild Steel Pipe of diameter 25 mm and wall 2/4 thickness 1.1 mm minimum, Sigle Moulded Piece No Support Structure thickness 1.1 mm minimum, Sigle Moulded Piece No Support Structure Support Structure Finishing Stove enameled Paint, Powder coated, chrome, epoxy polyester, synthetic enamel, Natural Steel Finish, Sigle Moulded Piece No Support Structure Stove enameled Paint, Sigle Moulded Piece No Support Structure CERTIFICATION Test reports to be furnished to buyer on demand YES - MISC Colour Ash Gray, Steel Gray, Dark Gray, Green, Olive Green, Brown, Dark Brown, White, Off White, Blue, YELLOW, PINK, UMB ER GOLD, Black - Colour/Pattern of Fabric for Seat and Backrest Cushions Black plain weave - WARANTEE PERIOD WARANTEE PERIOD IN NUMBER OF YEARS 3 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sulabh Sethi 482001, GRENADIERS REGIMENTAL CENTRE NEAR GRENADE CHOWK RAMPUR JABALPUR 482001 40 15 Required No ePBG Required No
hopper or tipper Hopper Or Tipper ( 6 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, GARBAGE TIPPER - Main Engine Capacity (cc) 702 Make of Chassis TATA MOTORS Type of Chassis Frame CONVENSNAL Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) Fuel Consumption ( 70 1/6 declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) Speed, Max (Km/Hr) 70 - Main Engine Power BHP@rpm (BHP@rpm) 16@3200 RPM - Engine Torque Max, @ rpm (N- M@rpm) 16HP 3200RPM Main Engine Aspiration Turbocharged Intercooled Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 30 Gradeability of Vehicle with load( %) 16.38 - Gradeability of Vehicle without load ( %) 18 - Ground Clearance (mm) 2200 Wheel Base (mm) 2100 - Kerb Weight (Kg) 840 Gross Vehicle Weight (Kg) 1550 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) 4X2 - Type of Front Axle and Suspension System PERABOLIC LIF SPRING RIGID AXLE - Type of Rear Axle and Suspension System PERABLIC LIF SPRING RIGID LIVE AXLE - Type of BIS MARKED Vehicle Tyre Radial - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 4 - Type of Steering Manual Manual, Power Operated 2/6 Turning Radius, Min (mm) 8.6 Speed Governers No - ABS Fitted No - Front Vehicle Brake DISK BRAKE - Rear Vehicle Brake DRUME BREAKE Type of Clutch SINGLE PLATE DRYFRICTION - Tipping Angle (Degree) 45 Tipper Container cap acity/Volume(cubic metres) 1.8 1.8 Certification Chassis Certification ARAI/VRDE/ICAT No. ARAI/CMVR/11883 Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 12 - No. Of Free Service (Nos) 3 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3800 - Width of Chassis (mm) 1500 - Height of Chassis (mm) 1845 - Size Of Front Tyres (mm) 145R12-8PR - Size Of Rear Tyres (mm) 145R12-8PR - Size of Wheel (mm) 155 Tipper body Pivot length (mm) 0 - Tipper body Length (mm) 2240 - Tipper Body Height (mm) 734 - Overall Height of Tipper from Ground (mm) 2040 - Body Plate Thickness (mm) 1.6 3/6 Main Frame Thickness (mm) 3 Pneumatic System false - Hydarulic System true - Tipping Hydraulic Cylinders(Make) BHUSER/WIPRO/SAI ENG/OR EQUVALUNT - Hydraulic System Driven by Power Pack Unit - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - If Yes Auxiliary Diesel Power (HP@rpm) 16HP 3200RPM Auxiliary Diesel Engine Transmission WATER COLLED Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 30 No. of Cylinders in Auxiliary Diesel Engine 1 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 1.6 Dumping Height (mm) 1400 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter true - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - 4/6 If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 zzz zzz 443201, Near Tahsil Office, Ward No, 16 2 15 2 Vijaya Vithoba Shingane 443201, Municipal Council Chikhli, Ward No.16 in front of post office. 2 15 3 Shrikrushna Babanrao Jaiwal 443201, 16 2 15 EMD Advisory Bank HDFC Bank EMD Percentage(%) 2.00 EMD Amount 73200 ePBG Required No
hopper or tipper Average Turn Over of Last 3 Years 20 Lakh (s) Experience with Gov. Required 1 Year (s) Hopper Or Tipper ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, - Main Engine Capacity (cc) 2956 Make of Chassis - - Type of Chassis Frame - - Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) 1/5 Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 18.5 Speed, Max (Km/Hr) 60 - Main Engine Aspiration Natural Aspiration Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 4 Fuel Tank Capacity (Ltrs) 60 Gradeability of Vehicle with load( %) 18 - Gradeability of Vehicle without load ( %) 28 - Ground Clearance (mm) 170 Wheel Base (mm) 2750 - Kerb Weight (Kg) 2200 Gross Vehicle Weight (Kg) 4450 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - - Type of Front Axle and Suspension System - - Type of Rear Axle and Suspension System - - Type of BIS MARKED Vehicle Tyre Tube - Chassis Transmission System Automatic Automatic, Manual Number of Speed Forward Gears 5 - Type of Steering Manual Manual, Power Operated Turning Radius, Min (mm) 5950 Speed Governers yes - 2/5 ABS Fitted yes - Front Vehicle Brake - - Rear Vehicle Brake - - Type of Clutch - - Tipping Angle (Degree) 45 Tipper Container cap acity/Volume(cubic metres) 3 Certification Chassis Certification ARAI/VRDE/ICAT No. - - Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 12 - No. Of Free Service (Nos) 3 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3250 - Width of Chassis (mm) 1550 - Height of Chassis (mm) 550 - Size Of Front Tyres (mm) - - Size Of Rear Tyres (mm) - - Size of Wheel (mm) 15 Tipper body Pivot length (mm) 3250 - Tipper body Length (mm) 1550 - Tipper Body Height (mm) 550 - Overall Height of Tipper from Ground (mm) 1990 - Body Plate Thickness (mm) 2 Main Frame Thickness (mm) 2 Pneumatic System false - Hydarulic System true - 3/5 Tipping Hydraulic Cylinders(Make) - - Hydraulic System Driven by Power Pack Unit - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation true - Auxiliary Diesel Engine Transmission - - Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 60 No. of Cylinders in Auxiliary Diesel Engine 1 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Dumping Height (mm) 550 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter true - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 4/5 1 Ayub Mahibub Maner 416312, Nr. Ram Mandir, Siddeshwar Chowk near ram mandir siddheshwar chou 2 15 Advisory Bank HDFC Bank EMD Percentage(%) 1.00 EMD Amount 21011 ePBG Required No
pH Meter Experience with Gov. Required 7 Year (s) PH Meter ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values CONFIGURATION Type Microprocessor Based Microprocessor Based, Microcontroller Based Display LED/LCD/Touch Screen, 3 digits - Calibration up to 3 points with auto buffer - pH Range (pH) 0.00 to 14.00 - Accuracy (pH) +- 0.05 +- 0.05 Corrosion Resistant Yes - Power Requirements 230 V +- 10, 50 Hz AC - Modes pH mV- C - Parallel temperature indication Yes - Temperature Compensation Type Automatic Automatic, Manual Temperature Accuracy (Degree C) +- 0.3 +- 0.3 Temperature Compensation Range (Degree C) 0 to 100 - 1/3 Resolution (pH) 0.01 - Operating Humidity: RH in (%) 60 - Operating Temperature (Degree C) 50 - Warranty Warranty (Year) 3 3 Storage pocket for pH electrode Yes - Ingress Protection, Water Tight 1 - Impact Resistant Yes - System to be supplied with Measuring electrode combined & glass calomel, temperature probe, Electrode Stand, calibration buffer and maintenance kit, operation manual, power cable and plug Yes - CERTIFICATIONS Availability Of UL/CE Certification As Per EN 61010-1:2010 Safety Requirements For Electrical Equipment For Measurement, Control, And Laboratory Use General Requirements NA - Test Reports For EMC/EMI As Per EN 61326-1:2013 Electrical Equipment For Measurement, Control And Laboratory Use EMC Requirements General Requirements (Test Reports Are To Be Furnished When Demanded By Buyer) YES - Availability Of Test Reports From Central Govt/NABL Approved ILAC Acredited Lab To Prove Conformity To The Specification (Test Reports Are To Be Furnished When Demanded By Buyer) true - Test Report Number 452235, 22.05.2016 - 2/3 and Date Name and address of the Lab JAISBO LAB, DELHI - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pratima Srivastav 324001, JDB govt girls college, Nayapura Kota 1 15 Required No ePBG Required No
digital conductivity meter Experience with Gov. Required 7 Year (s) Digital Conductivity Meter ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Display Display type 3 and half digit LED display 3 and half digit LED display, 3 and half digit LCD display Power supply: 220-240 V AC, 50 Hz - Conductivity, its ranges and resolutions Measurable Conductivity range Auto ranging Auto ranging, Range selection through a switch Maximum of measuring Range for conductivity (mS/cm) 200 Number of Ranges (Nos.) 4 1, 2, 3, 4 Resolution (µS/cm) 1.0e-05 Accuracy and cell constant Accuracy (in +/- %) 1 - Cell Constant 1 (Adjustable selectable) - Facility for measurement of absolute cell constant yes - Auto Cell Constant measurement facility Available Available, Not Available Temperature Type of Temperature Automatic Automatic, Manual 1/3 compensation and power Compensation Range of temperature compensation (degree celsius) 50 - weight and dimensions of tester Weight of the tester (grams) - - Dimensions (LXWXH) (cmXcmXcm) - - accessories and their details Details of All other accessories to be supplied along with the meter - - reports and certifications Availability of Test Report (To be furnished by Seller to Buyer on demand) from Central Govt/NABL/ILAC accredited lab to prove conformity to the specification, false - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pratima Srivastav 324001, JDB govt girls college, Nayapura Kota 1 15 Required No ePBG Required No
steel pipes for water and sewage Steel Pipes For Water And Sewage ( 650 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Conformity to Indian Standard IS 3589:latest Yes - ISI Marked true CML Number 5691886 - Manufacture, Material and Coating Method of Manufacturing Seamless Seamless, Electric Resistance Including Induction Welding, Submerged Arc Welded Including Spirally Welded (SAW) Grade of Steel Fe410 Fe330, Fe410, Fe450 Type of Coating Zinc Coating Without Coating, Zinc Coating, Cement Mortar Protective Linning and Coating, Liquid Epoxy Coating, Fusion Bonded Epoxy Coating, Hot Applied Tape Coating, Cold Applied Tape Coating Dimension Outside Diameter of Pipe (mm) 813 As per GeM Catalogue. Thickness of Pipe (mm) 8.0 As per GeM Catalogue. Mass of Pipe per 18.2 As per GeM Catalogue. 1/3 meter Length of Pipe (Metres) 3.0 As per GeM Catalogue. Type of Joint Pipe Ends for Joint Plain Ends Plain Ends, Bewelled Ends, Sleeve Joints, Swelled Test Report Availability of Test Reports of from Central Govt./State Govt/NABL/IL AC accredited Lab to prove conformity to the Specification YES - Test Report No 20170100800 - Test Report Date 27092017 - Name of the Lab JINDAL (INDIA) LIMITED - Address of the Lab REGD. & HO.:- 2/1, AHMED MAMUJI STREET- HOWRAH - Test report to be furnished to the buyer on demand YES - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Lav Agrawal 495552, Chief Municipal Officer Municipal Council Akaltara 650 15 Required No ePBG Required No
manual single channel air displacement pipetters or micropipette Experience with Gov. Required 7 Year (s) Manual Single Channel Air Displacement Pipetters Or Micropipette ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Features and Sizes Type of Micropipette Variable Volume Single Channel Fixed Volume Single Channel, Variable Volume Single Channel Material of Piston Eppendorf PerfectPiston - Micropipette with spring loaded tip cone true Autoclavable true Capacity of Fixed Volume Single Channel Micropipette NA 10ul, 20ul, 25ul, 50ul, 1 00ul, 200ul, 250ul, 500 ul, 1000ul, NA Locking Mechanism false Digital Volume Indicator With With, Without Other Details Conforming to Specification IVD, CE Volume Range of Variable Volume Single Channel 10-100ul, As per GeM Catalogue. 1/2 pipette Volume increment (in Ul) 10 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pratima Srivastav 324001, JDB govt girls college, Nayapura Kota 1 15 Required No ePBG Required No
pH Meter Experience with Gov. Required 7 Year (s) PH Meter ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values CONFIGURATION Type Microprocessor Based Microprocessor Based, Microcontroller Based Display LED/LCD/Touch Screen, 3 digits - Calibration up to 3 points with auto buffer - pH Range (pH) 0.00 to 14.00 - Accuracy (pH) +- 0.05 +- 0.05 Corrosion Resistant Yes - Power Requirements 230 V +- 10, 50 Hz AC - Modes pH mV- C - Parallel temperature indication Yes - Temperature Compensation Type Automatic Automatic, Manual Temperature Accuracy (Degree C) +- 0.3 +- 0.3 Temperature Compensation Range (Degree C) 0 to 100 - 1/3 Resolution (pH) 0.01 - Operating Humidity: RH in (%) 45 - Operating Temperature (Degree C) 50 - Warranty Warranty (Year) 3 3 Storage pocket for pH electrode Yes - Ingress Protection, Water Tight IP21 - Impact Resistant Yes - System to be supplied with Measuring electrode combined & glass calomel, temperature probe, Electrode Stand, calibration buffer and maintenance kit, operation manual, power cable and plug Yes - CERTIFICATIONS Availability Of UL/CE Certification As Per EN 61010-1:2010 Safety Requirements For Electrical Equipment For Measurement, Control, And Laboratory Use General Requirements Yes - Test Reports For EMC/EMI As Per EN 61326-1:2013 Electrical Equipment For Measurement, Control And Laboratory Use EMC Requirements General Requirements (Test Reports Are To Be Furnished When Demanded By Buyer) CE ISO-9001 - Availability Of Test Reports From Central Govt/NABL Approved ILAC Acredited Lab To Prove Conformity To The Specification (Test Reports Are To Be Furnished When Demanded By Buyer) true - Test Report Number 48G502 and - 2/3 and Date 21-10-2017 Name and address of the Lab Star Labs and Delhi - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pratima Srivastav 324001, JDB govt girls college, Nayapura Kota 2 15 Required No ePBG Required No
hand held search light Average Turn Over of Last 3 Years 5 Lakh (s) Experience with Gov. Required 5 Year (s) Hand Held Search Light ( 27 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Type of lamp LED Halogen, Xenon, LED Battery capacity (AH) 9 N/A CONSTRUCTIONAL Dia of search light (mm) 126 to 150 50 to 75, 76 to 100, 101 to 125, 126 to 150, 151 to 175, 176 to 200 Wattage of lamp (Watt) 15 1, 3, 5, 10, 15, 20, 30, 35, 5 5 Color temperature (Degree K) 5500 to 6500 deg. K for other lamps 4000 to 4500 deg K for Halegon, 5500 to 6500 deg. K for other lamps Beam angle selection Wide N/A Range of Narrow beam angle (Degree) and Range of wide beam angle (Degree) up to 4 deg N/A Type of front glass Toughened, scratch resistant N/A One hand operated switch Yes N/A Built-in battery charger NO but external N/A Type of battery SMF SMF, Lithium ion 1/5 Battery Voltage (Volts) 4 N/A Provision of Lanyard strap Yes N/A Rugged, impact and water resistant material of housing Yes N/A Type of housing material ABS ABS, POLYCARBONATE, SUPERTUFF GLASS FILLED NYLON, ALUMINI UM, POLYPROPYLENE Accessories such as Battery charger with cable for External type Charging cable for inbuilt type Yes N/A Gross weight of Hand Held Search with battery (grams) 3.8 kg (max.) with SMF Lead Acid battery N/A Warranty for HHSL (in years) 12 Months (SMF Lead acid battery) 6 Months (SMF Lead acid battery), 12 Months (SMF Lead acid battery), 24 Months (SMF Lead acid battery), 12 Months (Li- ion battery) HHSL system with battery shall pass the drop testf rom 1 mtr., height Yes N/A FUNCTIONAL Light output of search lght (LUX at 100 metres)) 900 N/A Effective distance of search light (Metre) >/= 8 metres N/A Lamp dimming Continuous N/A Continuous search light operation time at maximum lumen output (Hours) FOR LED/XENON ./= 5 HRS FOR HALOGEN >/= 1 HR., FOR LED/XENON >/= 3 HRS, FOR LED XENON ./= 5 HRS, FOR HALOGEN >/= 5 HRS Battery charging time (Hours) 8 N/A Operating Temperature range (Degree C) -20 deg C to +55 deg c N/A Operating relative humidity range (%) RH 95% at 40 deg.c N/A Lamp life (Hours) 50000 N/A CERTIFICATIONS Availability of Type test report from Central Yes N/A 2/5 government/NABL/ILAC accridiated laboratory to prove conformity to the specification Test report number ERTL(N)/90(4)-2K C0339 N/A Date of test report 18.9.2017 N/A Name and address of laboratory Electronics Regional Test Laboratory, New Delhi, Govt of India Lab N/A PROTECTION Protection against reverse polarity Yes N/A Protection from battery over-discharge Yes N/A Protection from battery over-charge Yes N/A Short circuit protection Yes N/A IP designation for Ingress protection IP 65 N/A * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Lohit Goswami 781001, FIRE AND EMERGENCY SERVICES ASSAM HEADQUARTERS PANBAZAR GUWAHATI DISTRICT- KAMRUP METRO (ASSAM) 27 15 EMD Required No ePBG Required No
Hard disk drives Average Turn Over of Last 3 Years 340 Lakh (s) Experience with Gov. Required 3 Year (s) Hard Disk Drives ( 260 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Type of Drive SSD SSD Capacity of Drive (GB) 1920 - Media Diameter (cm) 0 - Rotational Speed (rpm) 0 - Interface Type Serial Attached SCSI - Synchronous Transfer Rate (Maximum) (MB/s) 2500 - Buffer (MB) 64 - Cache (MB) 64 - Rated Power (Watt) 15 - Rated for 24/7/365 operation Yes - Physical Size(Height) (mm) 7 - Physical Size(Width) (mm) 1.5 - Operating Temperature Range (Degree C) 32 - Performance 1200 - 1/2 (Sequential Read) (MB/s) Performance (Sequential write) (Mb/p) 900 - Warranty (Years) 3 1, 2, 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vikas Gupta 110053, National Data Centre 564 IT Park Road, Metro Vihar Shastri Park, Jagjit Nagar, New Delhi-110053 260 45 EMD Advisory Bank HDFC Bank EMD Percentage(%) 2.00 EMD Amount 3760385 ePBG Advisory Bank AXIS BANK LTD ePBG Percentage(%) 5.00 Duration of ePBG required (Months). 38
End point protection software/appliances End Point Protection Software/Appliances ( 200 ) Technical Specifications Specification Specification Name Values Allowed Values BASIC INFORMATION OF END POINT PROTECTION SOFTWARE(GOLDEN) Category Software Software, Appliance Software/Appliance Type Subscription Subscription, Perpetual Name of Software ESET ENDPOINT PROTECTION ADVANCED - OEM Model/Part NO. EEPA3Y - Software/Appliance Version 6.X - Date of Launch of Version 14 March 2017 - FEATURES AND FUNCTIONALITY PARAMETERS(GOLDEN) Mobile Endpoints Security true Global Threat Intelligence support true Advanced Protection for Virtual Environments true Signature based Protection true Data Protection Full disk and file Encryption false 1/6 Data Loss Prevention (DLP/IDLP) capability false Storage Security true Data backup/Data recovery false Cloud-Assisted Security Network true No. of days Training provided at site 6 to 10 0, upto 5, 6 to 10, 11 to 20, 21 to 30 Number of Years upto which support (warranty) is available from OEM Franchise online 3 0, 1, 2, 3, 5 FEATURES AND FUNCTIONALITY PARAMETERS(GENERIC) Anti-virus feature true - Anti-malware feature true - Anti-phishing feature true - Anti ransom ware true - Personal Firewall true - Network Attack Blocker true - Web Control/URL filtering true - Host - based Intrusion Detection/Prevention System(HIDS/HIPS/IPS/I DS) true - Host integrity true - Application Control true - Device Control true - USB Device Control true - Vulnerability asessment and patch management false - Deception Technology true - Browser protection true - Anti-theft Protection true - End point forensic false - File server Protection true - System Watcher true - Memory Protection true - Advance machine learning true - 2/6 Content filtering capability true - Auto-Sandboxing capability true - Device Authentication capability true - Centralized Management true - SUPPORTED HARDWARE REQUIREMENTS PARAMETERS Hard Disk Space Required 1 GB - RAM Size required 1 GB - CPU required Intel Pentium 2 and above - Operating Systems supported (Driver) OS Platform - 32 & 64 Bit, OS - Windows XP SP3 & Higher, Windows Server 2003 & Higher, MacOS 10.6 And Higher, Kernel 2.6.X GNU C Library 2.3 Or Newer GTK+ 2.6 Or Newer LSB 3.1 Compatibility Recommended, Android 4 :Ice Cream Sandwich And Later - Hyper link compatibility matrix true - GENERIC PARAMETERS OF END POINT PROTECTION SOFTWARE Free Upgradation to Higher Version with in support period yes - Number of user handling capability 100000 - Concurrent user handling capability 1000 - Valid Licence copy to be provided YES YES Software supplied through URL Link - Certifications Benchmarking of Software Products VB100;AV Comparatives;ASCII Media Works;ICSA Labs;West Coast Labs; - Installation and Demonstration true - List of items included in the package License Key -1, LIC File, License Certificate - Hyper link to Data https:/cdn1.esetstatic. - 3/6 sheet com/ESET/INT/Docs/Bus iness/Solution-Overvie w-ESET-Business- Solutions.pdf No of Software Appliances sold 10000 - Number of User Referance no. 1 with in Government Department email, phone no. of concerned authority where Software/Appliance installed 1000 - Details of Government Department email, phone no. Of concerned authority where Software/Appliance installed for above Vikram Sarabhai Space Centre;Radhakrishnan Nair. C S;0471-256514 1;[email protected] - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Narayan Chandra 753006, National Rice Research Institute, Bidyadharpur, Cuttack 200 15 EMD Required No ePBG Required No
Notebook Computers-laptop
OEM Cartridge/Consumable Average Turn Over of Last 3 Years 100 Lakh (s) Experience with Gov. Required 5 Year (s) OEM Cartridge/Consumable ( 100 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 78A Black Original LaserJet Toner Cartridge - Corresponding Part number/code CE278AC - Printer Model number/numbers for which Cartridge is suitable HP LaserJet M1536dnf MFP Printer, HP LaserJet P1566 Printer, HP LaserJet P1606dn Printer - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 2100 - 1/2 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Harjasmeet Singh 110011, Room No 39 C, South Block, DHQ PO, New Delhi -110011 100 15 Required No ePBG Required No
Submersible Cable for Submersible Pumps (Insulated or covered cable) Average Turn Over of Last 3 Years 500000 Lakh (s) Experience with Gov. Required 3 Year (s) Submersible Cable For Submersible Pumps (Insulated Or Covered Cable) ( 1000 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Cable Type THREE CORE FLAT CABLES WITH PVC INSULATION AND SHEATHED with multistrand flexible Copper Conductor FOR Submersible Pumps (FORMAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C) duly ISI marked to IS:694 latest TWO CORE FLAT CABLES WITH PVC INSULATION AND SHEATHED with multistrand flexible Copper Conductor FOR Submersible Pumps (FOR MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C) duly ISI marked to IS:694 latest, THREE CORE FLAT CABLES WITH PVC INSULATION AND SHEATHED with multistrand flexible Copper Conductor FOR Submersible Pumps (FORMAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C) duly ISI marked to IS:694 latest 1/3 CONSTRUCTION Size of Cable (Sqmm) 6 2.5, 4, 6, 10, 16 Number of cores 3 - Material of conductor Copper(EC grade) - Shape of conductor Stranded - Insulation Type C — Heat- resistant cables (HR) as per IS 5831 latest - Sheath "Type ST2 — cables sheathed with 85°C HRPVC compound to IS 5831 latest" - In addition to marking requirements as per relevant specification, sequential marking for length, Size of the cable, Type of the cable shall be embossed on every metre of the cable YES - standard cable length in a Coil/Reel 100 - Part length which can be supplied by seller 10 - CERTIFICATION BIS marked YES - BIS certificate number - - Availability of Type test report from Central government/NABL/ILAC accridiated laoratory to prove conformity to the specification for minimum and maximum ratings YES - Type Test Certificate No - - Type Test Certificate date - - Name of Lab - - Address of Lab - - Test Report to be furnished to the buyer on demand YES - * Bold specifications are the golden parameters. Consignees and Quantity 2/3 S.No. Consignee Address Quantity Delivery Days 1 Chandrashekhar Sahu 495223, nagar palika parisad tifra 1000 15 EMD Required No ePBG Required No
OEM Cartridge/Consumable Average Turn Over of Last 3 Years 300 Lakh (s) Experience with Gov. Required 15 Year (s) OEM Cartridge/Consumable ( 50 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 78A Black Original LaserJet Toner Cartridge - Corresponding Part number/code CE278AC - Printer Model number/numbers for which Cartridge is suitable HP LaserJet M1536dnf MFP Printer, HP LaserJet P1566 Printer, HP LaserJet P1606dn Printer - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 2100 - 1/2 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bhojraj Baseshankar 110001, ROOM 312, A Wing, Shastri bhawan 50 15 Required No ePBG Required No
OEM Cartridge/Consumable Average Turn Over of Last 3 Years 300 Lakh (s) Experience with Gov. Required 15 Year (s) OEM Cartridge/Consumable ( 50 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 18A Blk Contract LJ Toner Cartridge (CF218A) - Corresponding Part number/code CF218AC - Printer Model number/numbers for which Cartridge is suitable HP LaserJet Pro M104a Printer, HP LaserJet Pro M104w Printer, HP LaserJet Pro MFP M132a Printer, HP LaserJet Pro MFP M132nw Printer, HP LaserJet Pro MFP M132snw Printer, HP LaserJet Pro MFP M132fn Printer, HP - 1/2 LaserJet Pro MFP M132fw Printer Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1400 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bhojraj Baseshankar 110001, ROOM 312, A Wing, Shastri bhawan 50 15 Required No ePBG Required No
alumino ferric Alumino Ferric ( 20000 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conformity to Indian Standard IS 299:Latest YES - ISI Marked false BIS Licence Number NA - Test Report Details Availability of Test Reports of from Central Govt./State Govt/NABL/IL AC accredited Lab to prove conformity to the Specification YES YES, NO Test Report Number 18 - Test Report Date 20.01.2016 - Name of the Lab PHE State Lab Bhopal - Address of the Lab Bhopal - Test report to be furnished to the buyer on demand YES - Grade Grade Grade 4 (in solid form for treatment of water intended for drinking) - Packing Packing Size (Kg) 19 Packing Material Loose Slab - 1/2 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vasudev Bhushan 460001, Nagar Palika Town Hall Kothi bazar Betul 20000 15
lead acid battery Lead Acid Battery ( 100 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Types of Lead Acid of Battery Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments, Statinary Lead-Acid Batteries (with tubular positive plates) in Monobloc Container conforming to IS:13369/1992, Statio nary cells and Batteries, Lead Acid Type (With Tubular Positive Plates) conforming to IS:1651/1991, Stationar y Valve Regulated Lead Acid Batteries conforming to IS:15549 2005, Lead-Acid Storage Batteries for Motor Vehicles with Light weight and High Cranking Performance conforming to IS:14257 1995, Lead-Acid Storage Batteries for 1/3 Motor Vehicles conforming to IS:7372/1995 Nominal Voltage of Battery (volts) 12.0 Volt 2.0 Volt, 6.0 Volt, 12.0 Volt Material of container Polypropylene Hard Rubber, Fibre Reinforced Plastics (FR P), Polypropylene, ABS Rated Capacity at C20 discharge (AH) 7 Warranty (Years) 1 Year 1 Year, 2 Years, 3 Years, 4 Years, 5 Years Battery Condition Dry Charged - CONSTRUCTIONAL Dimensions (L x W x H) (mm x mm x mm) As per relevant IS Specifications - Volume of Electrolyte (ml) 10.9 - Weight of Dry Battery (Kg) shall be as per relevant IS: Specn., corresponding Ah Yes. - No.of cells per Battery (No.) 6 Cells for 12 Volt battery - CERTIFICATIONS Availability of Test Reports from Central Govt./NABL/ILAC accrediated Lab showing conformity to the specifications Yes - Address of the Lab bangalore - Name of the Lab CPRI - Test Report No. 2554JOZLWRT255 - Test Report Date 11 SEPT 2017 - Compulsory Registration (CRS) of BIS for safety as per IS 16046 as applicable. Secondary Cells and (Batteries containing Alkaline or other non- acid Electrolytes-Safety Requirements for Portable sealed secondary cells, and for Batteries made from them for use in portable applications Yes - * Bold specifications are the golden parameters. 2/3 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Harbans Singh 110066, 2nd Floor, Sewa Bhawan, R.K. Puram, New Delhi-110066 100 15 Required No ePBG Required No
Accounting software Accounting Software ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values BASIC INFORMATION OF ACCOUNTING SOFTWARE Name of Software - - Name of the OEM - - OEM Model/Part No - - Product Id of OEM - - Software Description - - Software Version - - Date of Launch of Version - - FEATURES & FUNCTIONALITY PARAMETERS(GOLDEN) GST ready from 'Bill' to 'File' true Multi-National Transactions false Support for e- Payments false Warehouse Management false Business Intelligence true Cloud support & Integration false Integration with other MIS software false 1/6 Budget Management Features true Budget conversion to product features false Budget conversion to services features false Budget Annual Procurement Plan Features false Production (Manufacturing) Management false Planning & Forecasting true Multi-Company support true Supply Chain Management false Strategic Finance and Capital Management false Financial Analysis and Planning true No of days Training Provided at Site 0 0, upto 5, 6 to 10 Number of Years upto which Support is available from OEM/Franchise online(in Years) 1 1, 2, 3, 5 FEATURES & FUNCTIONALITY PARAMETERS(GENERIC) Monitoring of physical parameter support to PFMS false - Accounts Payable true - Accounts Receivable true - General Ledger true - Payroll true - Billing & Invoicing true - Collections true - Cash flow Tracking & Management true - Interest Calculation true - Cheque Management true - Bank Reconciliation true - Bank Integration false - 2/6 Expense Tracking & Management true - Fund Accounting true - Purchase Management true - Sales Management true - Inventory Management true - Stock Management true - Consolidation/Roll-Up true - Fixed Asset Management false - Project Accounting true - Revenue Recognition true - Tax Management true - Audit Trail true - Balance Sheet and Profit/Loss Statement true - Income Statements true - Currency Conversion true - Multi-Department Project support true - Multi-Currency support false - If 'Yes', details of supported Currency - - Multi-language support true - If 'Yes', details of supported Languages - - Multi-Legislation support false - Support for Accounting Standards and Taxation of multiple Countries false - If 'Yes', details of supported Nations - - Compliance Management false - Credit Risk Management false - Liquidity Analysis true - Loan Portfolio Management false - Market Risk Management false - 3/6 Operational Risk Management false - Portfolio Management false - Portfolio Modeling false - Risk Analytics Benchmarks false - Business Management false - Distribution Management false - Reporting & Analysis true - Personalized dash boards based on user role false - SUPPORTED HARDWARE REQUIREMENT PARAMETERS Hard Disk Space Required - - RAM Size required - - Deployment Options true - Server requirements - - CPU required - - Other Hardware requirements - - Operating Systems supported (Driver) - - Supported Devices - - Supported Servers - - Supported Web browsers - - Supported Database - - Supported Networking Protocols - - Min Processor bench mark score required - - Number of Devices Managed 9 - GENERIC PARAMETERS OF ACCOUNTING SOFTWARE Free Upgradation to Higher Version Yes - Maximum user handling capability - - Concurrent user handling capability - - Valid Licence copy to be provided Yes - Software supplied URL Link - 4/6 through Certifications Benchmarking of Software Products - - Installation and Demonstration true - List of items included in the package - - Hyper link to Data sheet - - No of Softwares sold 10000 - Number of User Referance no 1 with in Government Department email, phone no Of concerned authority where Software/Appliance installed 3 - Details of Government Department email, phone no Of concerned authority where Software/Appliance installed for above - - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 RAKESH KUMAR GUPTA 110017, 18-20, COMMUNITY CENTRE, SAKET, NEAR PVR, NEW DELHI 1 15 Required No ePBG Required No
office suite software - MS Office etc Average Turn Over of Last 3 Years 400 Lakh (s) Experience with Gov. Required 3 Year (s) Office Suite Software - MS Office Etc ( 309 ) Technical Specifications Specification Specification Name Values Allowed Values BASIC INFORMATION OF OFFICE SUITE SOFTWARE(GOLDEN) Product Type Proprietary Suites open source suites, Proprietary Suites Name of Software OfficeStd 2016 SNGL OLP C - Name of the OEM microsoft - OEM Model/Part No 021-10553 - Product Id of OEM 021-10553 - Date of Launch of Version 2016 - FEATURES & FUNCTIONALITY PARAMETERS(GOLDEN) Proprietary Suite microsoft office suite microsoft office suite, libre office, g suite, easy office, framework, gobe productive, ichitaro just suite 2008, microsoft office, omega office hd from ssuite office, word perfect office, soft maker office, hancom office suite think free office, wps office, yozo 1/5 office, Not Applicable, Adobe Open Source Suite Not Applicable apache open office, calligra suite, onlyoffice desktop editors, Not Applicable Type of licensing users based core based, users based, socket based, concurrent based, Open Source No of days Training Provided at Site 0 0, upto 5, 6 to 10, 11 to 20, 21 TO 30 Number of Years upto which Support is available from OEM/Franchise online 1 1, 2, 3, 5 FEATURES AND FUNCTIONALITY PARAMETERS(GENERIC) Word Processor true - Spreadsheet true - Presentation Tool true - Drawings and Diagrams true - Database Access false - One - Click Export to PDF false - Accessibility true - Support for many native languages false - Open XML File Format true - 3rd Party Add -ons false - XML File Filter Tool false - ActiveX Control false - Writing Support true - Advanced path editing tool false - Gradient and pattern tools false - Files and Printing true - Editing and Formatting true - Complex Documents true - Graphics true - Language Tools true - 2/5 Manage Projects true - Collaboration over Same Platform Suite true - Billing false - Schedule meetings & Events true - Queries false - Forms true - Reports true - Relationships false - Connects with macros Macro Recorder true - Advance data manipulation false - User Control by writing rich VBA code false - Compatability with SQL/MySQL Integration false - Built in Spell Checker Grammer & Style true - Utilities for manupulating and editing text false - Templates true - Formula Calculation Function false - Graphing Tool true - Pivot Table/Tables true - Micro programming language false - Visual Basic Language false - Slide Transitions false - Equation Editor true - Common Regional languages false - Themes false - Version Information true - Web Apps true - Azure Marketplace Connector false - Power View false - Scanned Images true - 3/5 Auto Discover true - Cached Exchange Mode Sync Slider false - Exchange Server Support false - Outlook Social Connector false - People Pane false - PRF Files false - HTML Files true - Live Preview true - Blogging true - Research Button false - SUPPORTED HARDWARE REQUIREMENTS PARAMETERS Processor Speed Required 1.2 - Hard Disk Space Required 10 - RAM Size required 2 - Operating Systems Supported yes - GENERIC PARAMETERS OF OFFICE SUITE SOFTWARE Valid Licence copy to be provided yes - Software supplied through url link - List of items included in the package 0 - Number of Devices Supported for Each User License 1 - Details of Government Department email, phone no Of concerned authority where Appliance installed for above cgwb, rsldc, rajasthan high court - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sumit saini 160017, SCO 111-113 sector 17b 309 15 EMD 4/5 Advisory Bank HDFC Bank EMD Percentage(%) 2.00 EMD Amount 92638 ePBG Required No
patient care beds for general use Patient Care Beds For General Use ( 4 ) Technical Specifications Specification Specification Name Values Allowed Values DIMENSIONS OF MATTRESS PLATFORM & FRAME Length of mattress platform & Overall length of bed >=2100 mm & <=2150 mm >= 1900 mm & <=2000 mm, >=1950 mm & <= 2050 mm, >=2000 mm & <=2100 mm, >= 2050 mm & <=2100 mm, >=2100 mm & <=2150 mm, >= 2150 mm & <= 2200 mm, >= 2200 mm & <= 2250 mm Width of mattress platform >920 mm to 950 mm 900 mm to 920 mm, >920 mm to 950 mm, >950 mm to 1000 mm, >1000 mm to 1050 mm Material of mattress platform surface CRCA Sheet CRCA Sheet, SS Height of mattress platform 617.5 - Mattress platform surface thickness 1.2 mm and above - Type of mattress platform Perforated Perforated, With Holes BED Overall length of Bed(in mm): 2100 - 1/3 FRAME section, dimensions, thickness and material MS ERW rectangular tube with 50 mmx30 mm or more, gauge 1.2 mm or more. - Frame width (in mm) 920 - Leg Shoe material 1 - HEAD AND LEG BOARD Height of Head board measured from mattress platform 450 - Material of Leg board and head board MS tubular SS laminated, MS tubular, Plastic Height of Leg board 450 - Pipe diameter of Head and Leg Boards 30 mm or more - Thickness of pipe of Head and Leg board 1.2 mm or more - MISC Maximum Load Capacity must be >= 150 Kg Yes - Painting Powder coated Powder coated Colour of Bed Grey - Provision of I.V. poles Holder Yes - Provision of Mosquito net pole Holder Yes - Other details Drawing available on Web. false - If Yes, Drawing No. SIS-2003 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Yogesh Kumar Rana 732127, 36 Bn BSF, 17 Mile Baishnabnagar, PO- Chamagram 4 15
hopper or tipper Average Turn Over of Last 3 Years 60 Lakh (s) Experience with Gov. Required 3 Year (s) Hopper Or Tipper ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Box body Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, - Main Engine Capacity (cc) 1034 - Make of Chassis - - Type of Chassis Frame - - Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) 1/5 Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 20 Speed, Max (Km/Hr) 70 - Main Engine Aspiration Natural Aspiration Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 27 Gradeability of Vehicle with load( %) 10.2 - Gradeability of Vehicle without load ( %) 10.3 - Ground Clearance (mm) 185 Wheel Base (mm) 1970 - Kerb Weight (Kg) 924 Gross Vehicle Weight (Kg) 1924 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - - Type of Front Axle and Suspension System - - Type of Rear Axle and Suspension System - - Type of BIS MARKED Vehicle Tyre Radial - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 5 - Type of Steering Manual Manual, Power Operated Turning Radius, Min (mm) 7700 Speed Governers yes - 2/5 ABS Fitted No - Front Vehicle Brake - - Rear Vehicle Brake - - Type of Clutch - - Tipping Angle (Degree) 45 Tipper Container cap acity/Volume(cubic metres) 1.7 Certification Chassis Certification ARAI/VRDE/ICAT No. - - Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 12 - No. Of Free Service (Nos) 5 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3675 - Width of Chassis (mm) 1460 - Height of Chassis (mm) 1460 - Size Of Front Tyres (mm) - - Size Of Rear Tyres (mm) - - Size of Wheel (mm) 4.82 Tipper body Pivot length (mm) 1650 - Tipper body Length (mm) 2450 - Tipper Body Height (mm) 710 - Overall Height of Tipper from Ground (mm) 1500 - Body Plate Thickness (mm) 2 Main Frame Thickness (mm) 3 Pneumatic System false - Hydarulic System true - 3/5 Tipping Hydraulic Cylinders(Make) - - Hydraulic System Driven by Power Pack Unit - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - Auxiliary Diesel Engine Transmission - - Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Dumping Height (mm) 590 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 4/5 1 Vishal Sheshrao Hiwale 444203, Municipal Council Administrative Building, Main Road, Gandhi Chauk, Shegaon 10 15 Required No ePBG Required No
power cord-Flexible electric cable Heating cables or Wire cotton Power for Heater Power Cord-Flexible Electric Cable Heating Cables Or Wire Cotton Power For Heater ( 1800 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformation of cable to IS: 694 for PVC insulated cable IS: 694 for PVC insulated cable, IS:9968 (Pt-1&2) for elastomer insulated cable BIS Marked Yes - CM/L No 2832257 - CONSTRUCTIONAL Working voltage Upto 1100V - Type of insulation PVC PVC, Elastomer Type of sheath PVC PVC, Elastomer Sheated Yes Yes, No Outer cover material Non braided Non braided, Braided No. of cores 2 2, 3 Conductor material Copper - Size of the conductor 1.5 Sq. mm x 1 Core - Type of conductor Stranded - Type of service General - Type of flexible cord Unkinkable - Length of cable in a bundle (meter) 90 - 1/2 Cable bundle weight (kgs) 1.7 - CERTIFICATIONS Availability of Type test report from Central government/NABL/ILAC accridiated laboratory to prove conformity to the specification Yes - Test report number 09/02/6204/1001 - Test Report Date 18.06.2017 - Name of Lab FQC Uluslar Arasi - Address of the lab Istanbul - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ubaid Ul Rahman 121001, NIFM, Sector-48, Pali Road, Faridabad 121001 1800 15
Notebook Computers-laptop
Printer or photo Copier Paper Experience with Gov. Required 1 Year (s) Printer Or Photo Copier Paper ( 500 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 14490 : Latest Yes - Test Method as per IS: 1060 Yes - Size Size and Dimension of The Paper (W X L) in mm 210 x 297 210 x 297 Size of the Paper A4 A4 GSM of Paper 80 80 Quantity Number of Sheets per Ream 500 500 Physical Characteristics Brightness in % 95 95 Tensile Index MD in Nm/g 45 - Tensile Index CD in Nm/g 35 - Opacity in % 90 - Tear Index (Avg) in Nm.m²/g 5 - Smoothness for both sides (Bendtsen) in 250 - 1/3 ml/min Thickness in µm 100 - Moisture in % 5 - Stiffness MD 4 - Stiffness CD 3 - Surface Strength Dennison (Wax Pick) >= 12 A 12a - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 A Muruganandam 695551, Nr. Jersy Farm, Maruthamala, Vithura PO 500 15 Required No ePBG Required No
Refrigerated micro-centrifuge Experience with Gov. Required 7 Year (s) Refrigerated Micro-centrifuge ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values SET 1 Microprocessor controlled High speed Micro centrifuge Yes - Maximum permissible Speed (RPM): - - Relative Centrifugal Force (RCF), Max: 20, 000 x g to 22, 000 x g - Temperature Range - 10 degree C to +40 degree C - Refrigeration System: Must be CFC free. - Display for Speed, RCF, Temperature and Time parameters: Yes - Type of Display: LCD display LCD display, LED display Facility for short run operation Yes - Imbalance System and Selectable acoustic Alarms Yes - Running Modes available: soft/fast accelerate, decelerate Yes - 1/3 and break off mode Operation of equipment: By simple knob(s), By keypad operations By simple knob(s), By keypad operations Angle rotor Polypropylene/metallic 24 x (15/10) ml or Dual row rotor with same capacity/volume Yes - Lid Aerosol tight Polysulfone or equiv. Lid - Certification: US FDA, CE(European) US FDA, CE(European) Adopter for PCR tube sizes: 0.2 ml and 0.5 ml - Time Selection: 1 to 99 min or continuous - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pratima Srivastav 324001, JDB govt girls college, Nayapura Kota 1 15 Required No ePBG Required No
Line Intractive UPS with AVR Line Intractive UPS With AVR ( 35 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Rating in KVA/min VAH capacity of battery (KVA/VAH) 1.0/800 1.0/800 Technology MOSFET-PWM MOSFET-PWM Type of battery SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 Rated Output (Volt) Single phase sinewave 230v AC, 50Hz Single phase sinewave 230v AC, 50Hz Degree of protection IP-21 IP-21 Inverter Efficiency (%) >/= 70% >/= 70% Warranty for the battery from the date of delivery 1 year - Warranty for Line Interactive UPS 1 Year 1 Year Installation and commissioning instructions Yes - CONSTRUCTIONAL Type of enclosure ABS - AC out put for printer (not through inverter) Yes Yes 1/4 Inverter out put socket AC out put for printer (not through inverter) 3 Three pin 3 Three pin FUNCTIONAL Total harmonic distorsion (%) </= 40% - Input (Volt) Single phase sinewave(160-280v) - Switching over time (Mili sec) Maximum 10 milli seconds - Overload Time (Minutes) >/= 10 minutes - Load power factor >/= 0.6 - Variation in AVR output in AC mode (%) AVR (Voltage regulation) output voltage in AC Mode 230 Volts +/-9%, 50 +/-3 Hz - Overload (%) >/=10% - Variation in output voltage in battery mode (%) (UPS output voltage in battery mode) 230 Volts +/- 10% - Variation on output frequency in battery mode (Hz) </=0.5 - PROTECTION Protection against (over discharge) discharge per 12v battery (Volt) 10.5 - Protection for outside input voltage range: If Input voltage goes outside the range 160 to 280 Volts, the system shall switch over to battery mode Yes - Protection against short circuit of UPS Yes - Protection for over voltage and over load Yes - REPORTS AND CERTIFICATIONS Damp heat Test at 45 degree, RH -95% for 2-cycle as per IS:9000 pt-5/sec-1 Yes - Dry heat Test at 45 degree for 16 Hrs as per IS:9000 pt-3/sec-5 Yes - 2/4 Cold Test as per IS:9000 pt-2/sec-4 Yes - Availability of the type test report from central Govt./NABL/ILAC Accredited Lab Yes - Type Test certificate no. and date NTS/OFFLINE UPS/06/DT-29.6.2017 - Name Of Lab NISAKI TECHNOLOGY SUPERVISES - Address of Lab BANGLORE - As per Meity (Government of India) guidelines UPS shall have valid BIS CRS certifications as applicable Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dhanesh E P 761052, ARMY AIR DEFENCE RECORDS, GOPALPUR MILITARY STATION, GANJAM, ODISHA-761052 35 25
Line Intractive UPS with AVR Line Intractive UPS With AVR ( 4 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Rating in KVA/min VAH capacity of battery (KVA/VAH) 2.0/800 2.0/800 Technology MOSFET-PWM MOSFET-PWM Type of battery SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 Rated Output (Volt) Single phase sinewave 230v AC, 50Hz Single phase sinewave 230v AC, 50Hz Degree of protection IP-21 IP-21 Inverter Efficiency (%) >/= 70% >/= 70% Warranty for the battery from the date of delivery 1 year - Warranty for Line Interactive UPS 1 Year 1 Year Installation and commissioning instructions No - CONSTRUCTIONAL Type of enclosure ABS - AC out put for printer (not through inverter) Yes Yes 1/4 Inverter out put socket AC out put for printer (not through inverter) 3 Three pin 3 Three pin FUNCTIONAL Total harmonic distorsion (%) </= 40% - Input (Volt) Single phase sinewave(160-280v) - Switching over time (Mili sec) Maximum 10 milli seconds - Overload Time (Minutes) >/= 10 minutes - Load power factor >/= 0.6 - Variation in AVR output in AC mode (%) AVR (Voltage regulation) output voltage in AC Mode 230 Volts +/-9%, 50 +/-3 Hz - Overload (%) >/=10% - Variation in output voltage in battery mode (%) (UPS output voltage in battery mode) 230 Volts +/- 10% - Variation on output frequency in battery mode (Hz) </=0.5 - PROTECTION Protection against (over discharge) discharge per 12v battery (Volt) 10.5 - Protection for outside input voltage range: If Input voltage goes outside the range 160 to 280 Volts, the system shall switch over to battery mode Yes - Protection against short circuit of UPS Yes - Protection for over voltage and over load Yes - REPORTS AND CERTIFICATIONS Damp heat Test at 45 degree, RH -95% for 2-cycle as per IS:9000 pt-5/sec-1 Yes - Dry heat Test at 45 degree for 16 Hrs as per IS:9000 pt-3/sec-5 Yes - 2/4 Cold Test as per IS:9000 pt-2/sec-4 Yes - Availability of the type test report from central Govt./NABL/ILAC Accredited Lab Yes - Type Test certificate no. and date R-85002828, 04/06/2016 - Name Of Lab BIS, STQC-ETDC (GOVT. OF INDIA) - Address of Lab BIS DELHI, STQC-ETDC (GOVT. OF INDIA), MOHALI, PUNJAB - As per Meity (Government of India) guidelines UPS shall have valid BIS CRS certifications as applicable Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dhanesh E P 761052, ARMY AIR DEFENCE RECORDS, GOPALPUR MILITARY STATION, GANJAM, ODISHA-761052 4 25
Desktops Desktops ( 3 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel Intel Processor Generation 7th 7th Processor Intel Core i7-7700 (3.6 GHz, 8 MB Cache, 4 Cores) Intel Core i7-7700 (3.6 GHz, 4 Cores) Motherboard Chipset Intel Q270 As per GeM Catalogue. Expansion Slots (PCIe x 1) (Number) 1 - Expansion Slots (PCIe x 4) (Number) 0 - Expansion Slots (PCIe x 16) (Number) 1 - Graphics Graphics Type Integrated - Graphic Memory N/A - Operating System Operating System (Pre-Loaded) Windows 10 Professional under Microsoft Shape the Future Program Windows 10 Profession al, Linux, DOS, Windows 10 Home, Windows 10 Professional under Microsoft Shape the Future Program RAM Type of RAM DDR 4 - RAM Size (GB) 8 8 1/3 RAM Expandability upto (GB) 32 32 RAM Speed (MHz) 2400 - Storage Hard Disk (GB) 1000 500, 1000, 2000 Cabinet Cabinet Tower - Cabinet Volume (Litres) - - Internal Bays 2 - External Bays (Number) 2 - DIMM Slots (Number) 4 - Connectivity Wireless NA - Network Connectivity 10/100/1000 on board Integrated Gigabit Port - Ports USB Port 2.0 (Number) 4 - USB Port 3.0 (Number) 4 - Serial Port true - Parallel Port false - VGA true - HDMI true - Display Port true - Monitor Monitor Size (INCHES) 21.5 21.5 Monitor Resolution (PIXELS) 1920x1080 1366x768, 1920x1080, 3 200x1800, 3840 x 2160, 1440 x 900, 1600 x 900 Monitor Certification - - Power Power Supply (Watt) - - Minimum Power Efficiency(%) 85 - Certification ROHS Compliance Yes - BEE/Energy Star for the given Model true - Input Devices Mouse Optical - Keyboard Standard - Generic Optical Drive DVD R/W - Internal Speaker false - On Site OEM Warranty (Year) 3 3 * Bold specifications are the golden parameters. Consignees and Quantity 2/3 S.No. Consignee Address Quantity Delivery Days 1 Raghubir Singh 176052, HQ COMMANDER WORKS ENGINEER MILITARY ENGINEER SERVICE YOL CANTT 3 15
OEM Cartridge/Consumable Average Turn Over of Last 3 Years 100 Lakh (s) Experience with Gov. Required 10 Year (s) OEM Cartridge/Consumable ( 100 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand Samsung - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number Samsung MLT-D1043S Black Toner Cartridge - Corresponding Part number/code MLT-D1043S/XIP - Printer Model number/numbers for which Cartridge is suitable ML-1660, ML-1666, ML-1 670, ML-1675, ML-1860, ML-1865, ML-1865W, SC X-3201, SCX-3206W - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1500 - * Bold specifications are the golden parameters. 1/2 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ravindra Kumar 110066, Room no. 314 (S), Sewa Bhawan, R.K.Puram, New Delhi-110066 100 30
Scanning and Digitisation Service
revolving chair Revolving Chair ( 30 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type push back As per GeM Catalogue. Tilt Tension Adjustment true - Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest with lumber support of polypropylene at multilevel across back backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Adjustable Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black - Ergonomic Seat Design true Back type push back push back, height adjustable Backrest is made of two pcs injection Backrest is made of two pcs injection - 1/5 moulded frame moulded frame backrest has separate adjustable headrest true Seat type fixed fixed, sliding Seat is curved true - Locking mechanism true - Type of locking 3-Position Locking - Number of arm movement 2(up & down) 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon 2/5 Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material steel covered with polyurethane steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Pr oypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material pressed and moulded plywood with polypropylene cover pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 35 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 35 - Material of Fabric Back Cover mesh fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leathe rite, N.A Material of Fabric of Seat Cover foam laminated mesh fabrics foam laminated mesh fabrics, Mesh Fabrics, leatherite, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 220 gram - 3/5 DIMENSION Overall Chair Height ±15mm 670 As per GeM Catalogue. Backrest Height ±15mm 460 As per GeM Catalogue. Backrest Width ±10mm 410 410, 440, 480, 500, 520, 5 50, 650, 680, 700, 720 Seat Height ±15 mm 420 420, 450, 520 Seat Width ±10 mm 440 440, 550, 4 60 Seat Depth ±10 mm 400 400, 460, 420, 540 Thickness of M S Plate Joining the under structure with Seat 0.2 As per GeM Catalogue. Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 600 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 25 mm As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 25 mm As per GeM Catalogue. WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4- year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO 4/5 Green guard certification YES YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Monali Dey 753002, OFFICE OF THE PROJECT DIRECTOR, DUDA, CUTTACK NEAR COLLECTORATE PO :CHANDNICHOWK DISTRICT : CUTTACK PIN : 753002 ODISHA 30 15 Required No ePBG Required No
diesel generators- DG Sets Diesel Generators- DG Sets ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values OUTPUT CAPACITY RATING/PHASE Nominal Rated Capacity (KVA) 25 25 No of Phase - Single phase, Three Phase ENGINE Make of Engine - - Model Number of Engine - - Capacity of Engine (cc) - - Engine Power (kWm) - - ISI Marking to IS :10001 for engine true - Type of Engine cooling Air Cooled Air Cooled, Liquid Cooled Type of governer Mechanical Mechanical, Electronic Class of governer A1 A0, A1, A2 Number of cylinders (nos) 3 - No of Strokes (nos) 4 - Rated RPM of Engine (RPM) - 1500, 3000 Overload capacity for one hour for every 11 10 - 1/4 hours continuous running at full load (%) Specific Fuel Consumption (gm/kWh) - - Starting voltage (volt) 12 - ALTERNATOR AC GENERATOR(ALTER NATOR) Make - - AC GENERATOR(ALTER NATOR) model Number - - Rating of AC Generator (KVA) 25 - Power Factor of AC generator 0.8 - Efficiency at rated Power factor at 75% of full Load 88 - Compliance of Alternator to IS:13364(part-1) Yes - Type of alternator Brushless - Voltage Regulation Grade VG 1 - Alternator IP Rating IP 23 - Class of Insulation H - CONTROL PANEL Control Panel AMF AMF IP Rating of Control Panel IP 53 - ACOUSTIC ENCLOSURE Sheet Thickness 1.6 1.6, 1.8, 2, 1.2 Thickness of Foam 20 - Density of Foam for sound insulation 20 - Noise level at 1 meter (dB) 75 - BATTERY Battery Type & Specification Normal lead acid to IS: 7372 for motor vehicles - Battery capacity (Ah) - - No of batteries 1 - TEST REPORTS Availability of Type test report for Engine from Central govt/NABL/ILAC accredited laboratory Yes - Test Report number and date(Engine) - - Name and address of laboratory(Engine) - - 2/4 Availability of Type test report for Alternator from Central government/NABL/ILAC accredited laboratory Yes - Test Report number and date(Alternator) - - Name and address of laboratory(Alternator) - - DG set meet requirements of Enviro nmental(Protection) Rules 1986, in respect of noise and emission norms, as described in STC Yes - WARRANTY INSTALLATION & COMMISSIONING Warranty 3 Installation & Commissioning Without Installation With Installation, Without Installation Agreed to STC of the Product Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 RAJENDRA PATEL 530024, "DEEP BHAVAN" DIRECTORATE OF LIGHTHOUSES AND LIGHTSHIPS, BESIDES PORT WATER TANK NEAR NARSIMHANAGAR RYTUBAZ AR, SALIGRAMPURAM, VISAKHAPATNAM 2 15 EMD Required No ePBG Required No
Authentication, Authorization and Accounting (AAA) Server Average Turn Over of Last 3 Years 25 Lakh (s) Experience with Gov. Required 3 Year (s) Authentication, Authorization And Accounting (AAA) Server ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Specification AAA Server Type Appliance Based Appliance Based, Virtual Integration and Security Support from day 1 Wired and Wireless Wired, Wireless, Wired and Wireless Minimum Number of Concurrently Handled Device 4000 1000, 2000, 3000, 4000 Number of Concurrent Users 4000 1000, 4000 Users scalable upto upto 5000 upto 2000, upto 3000, upto 4000, upto 5000 Devices scalable upto (Devices are mixture of guest users, tenants, organization staff and machine end points) upto 5000 upto 2000, upto 5000 BYOD with Self-service authorization and device provisioning via Yes - 1/5 open network Machine Authentication (or an appropriate alternative) by adjoined Windows laptops/tablets allowing wireless connection before user logon Yes - Issue certificates to mobile devices like Tabs/iPads - to allow machine authentication for non-AD joined devices Yes - Built-in user database with per device/user credential management and Seamless backend integration with RADIUS, AD, LDAP Yes - Threat-Centric and conduct scan test for vulnerability assessment of Endpoint devices and control access based on endpoint’s threat score No - Intuitive user/device management and Unified device visibility and reporting Yes - Self-service 802 point 1X and guest access, MAC authentication for selective devices and Social Login Yes - Integrated AAA server with key policy definitions, Integration with external AAA server and CA server Yes - Integrate with existing user databases like Microsoft AD/LDAP/Certificate Authority Yes - Scalable to enforce device-specific settings for antivirus, firewall and OS patches No - 2/5 Enforce custom user and device privileges No - On Site OEM Warranty (Years) 3 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Noharlal Ghormare 400707, Administration Building, Sheva, Navi Mumbai 1 45 Required No ePBG Advisory Bank HDFC Bank ePBG Percentage(%) 10.00 Duration of ePBG required (Months). 38
OEM Cartridge/Consumable OEM Cartridge/Consumable ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand Kyocera - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Cyam - Ink/Toner/Drum Model number TK-899C - Corresponding Part number/code 1T02K0CSG0 - Printer Model number/numbers for which Cartridge is suitable ECOSYS FS C8520 - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 6000 - * Bold specifications are the golden parameters. Consignees and Quantity 1/2 S.No. Consignee Address Quantity Delivery Days 1 Sai Prashanth Maddipatla 282008, AOC AIR FORCE STATION AJIT NAGAR GATE KHERIA MOD AGRA - 282008 5 15
OEM Cartridge/Consumable OEM Cartridge/Consumable ( 6 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand Kyocera - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number TK-899K - Corresponding Part number/code 1T02K00SG0 - Printer Model number/numbers for which Cartridge is suitable ECOSYS FS C8520 - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 12000 - * Bold specifications are the golden parameters. Consignees and Quantity 1/2 S.No. Consignee Address Quantity Delivery Days 1 Sai Prashanth Maddipatla 282008, AOC AIR FORCE STATION AJIT NAGAR GATE KHERIA MOD AGRA - 282008 6 15