Buyer Organistion Tender Results

automotive vehicles pneumatic tyres Automotive Vehicles Pneumatic Tyres ( 16 ) Technical Specifications Specification Specification Name Values Allowed Values Ungrouped Category Of Pneumatic tyres Normal Road Tyre Normal Road Tyre, Special use Tyre: mixed used, Restricted speed: snow tyre Tyres Without Tube Without Tube Conformity to Indian Standrad for Pneumatic Tyres IS:15636 latest for Automotive vehicles: Pneumatic tyre for commercial Vehicles- Diagonal and radial ply IS:15627 latest for Automotive vehicles: Pneumatic tyre for two and three wheeled motor Vehicles, IS:15633 latest for Automotive vehicles: Pneumatic tyre for passenger car Vehicles-Diagonal and radial ply, IS:15636 latest for Automotive vehicles: Pneumatic tyre for commercial Vehicles-Diagonal and radial ply Conformity to Indian Standrad for Pneumatic Tubes NA for Tubeless TYRES IS:13098 latest for Automotive vehicles: Tubes for Pneumatic tyre, NA for Tubeless TYRES ISI MARKED (for Yes Yes 1/3 Tyres) CM/L No and validity date)(for Tyres - - ISI MARKED (for Tubes) NA for Tubeless and without tube Yes, NA for Tubeless and without tube CM/L No and validity date(for tubes) - - Type of tube NA for Tubeless and without tube - Manufactures name and Trade Name - - Tyre-size Designations F78X15 - Tube-size Designations NA - Structure of Tyre Bias-belted Diagonal or bias ply, Bia s-belted, Radial, Reinforc ed or Extra Load Ply Rating 4 PLY - Speed Category - - Load indicas - - Side Well (mm) 110 - Inner area of Tyers (mm) 100 - Section Width (min)(mm) 6 - Overall Width (max)(mm) 6.5 - Section Height (mm) 15 - Nominal Aspect Ratio(mm) 15 - Outer diameter (min)(mm) 605 Nominal Rim Diameter(mm) 381 Maximum load Rating(%) 565 Conformity to AIS-044 Yes - Availability of Type Test Report covering complete test parameters as per relevant BIS spcification latest for Tyre type, from any ILAC/NABL accredited/Central Gov. LAB. YES - 2/3 Test cetificate No. - - Test Report Date - - Name and address of the Lab where test Conducted - - Others Certificate ie ROHS, WHO, GMP etc - - Warranty Time 1 1, 2, 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ankit Ahlawat 834010, 17 corps OMC, Namkum 16 15

Air Conditioner Air Conditioner ( 4 ) Technical Specifications Specification Specification Name Values Allowed Values CAPACITY/GENERIC Type of Air conditioner Window AC Window AC, High wall Split AC, Ceiling Mounted Split AC (Cassette AC), Floor Standing Split AC Technology of AC Non- Inverter (Fixed Speed) Inverter (Variable Speed), Non- Inverter (Fixed Speed) Nominal cooling capacity in Ton (kcal/hr) 1.5 Ton/4500 kcal/hr 1.0 Ton/3000 kcal/hr, 1.5 Ton/4500 kcal/hr, 2.0 Ton/6000 kcal/hr, 2.5 Ton/7500 kcal/hr, 3.0 Ton/9000 kcal/hr Coil Material Copper Aluminium, Copper Eco-friendly refrigerant true true Minimum length of copper pipe and suitable connecting electrical cable for installation and commissioning NA' for Window AC - Packing LIst N/A - Any other Features N/A - 1/3 CONFORMITY CERTIFICATION BEE Star Rating 3 3 Conformity to Indian Standard IS 1391 latest - WARRANTY Warranty on Machine 1 1, 2, 3, 4, 5 Warranty on Compressor 5 5, 6, 7, 8, 9, 10 INSTALLATION Installation and commissioning With Installation and Commissioning With Installation and Commissioning, Without Installation and Commi ssioning, Installation and Commissioning at Extra Cost as offered by the seller seperately on GeM * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vishvaroop 302012, COMMAND MILITARY DENTAL CENTER (SWC) OPPOSITE TRITON MALL, JHOTWARA ROAD JAIPUR MILITARY AREA 4 15 EMD Required No ePBG Required No

Air Conditioner Air Conditioner ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values CAPACITY/GENERIC Type of Air conditioner High wall Split AC High wall Split AC Technology of AC Non- Inverter (Fixed Speed) Non- Inverter (Fixed Speed) Nominal cooling capacity in Ton (kcal/hr) 2.0 Ton/6000 kcal/hr 2.0 Ton/6000 kcal/hr Coil Material Copper Copper Eco-friendly refrigerant true true Minimum length of copper pipe and suitable connecting electrical cable for installation and commissioning 3 metre - Packing LIst indoor unit, Remote control, Out door Unit, copper pipe-3.5 Meter, Power cable in copper ( 4 Core)- 3.5 Meter - Any other Features Titanium Di oxide coating on evaporator coils for very low maintenance, Fast Cooling and Fresh Air, 1/3 HD Compressor CONFORMITY CERTIFICATION BEE Star Rating 3 3 Conformity to Indian Standard IS 1391 latest - WARRANTY Warranty on Machine 1 1.0 Warranty on Compressor 5 5.0 INSTALLATION Installation and commissioning With Installation and Commissioning With Installation and Commissioning * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vishvaroop 302012, COMMAND MILITARY DENTAL CENTER (SWC) OPPOSITE TRITON MALL, JHOTWARA ROAD JAIPUR MILITARY AREA 1 15 EMD Required No ePBG Required No

household disinfectants or disinfectant fluids phenolic type Household Disinfectants Or Disinfectant Fluids Phenolic Type ( 200 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 1061:Latest Yes - ISI Marking false CML Number 9169691 - Test Report Details Availability of Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification Yes Yes, NO Test Report Number SL/GP001/070416 - Test Report Date 12/01/2016 - Name of the Lab SHREEJI ANALYTICAL & RESEARCH LABORATORIES PVT. LTD. - Address of the Lab 1-A BALIJI TULSIYAN INDUSTRIAL ESTATE GRAM KUMEDI, NEAR MR 10 INDORE - Test Report shall be furnish to Buyer on Yes - 1/3 Demand Classification Class White Black, White Grade 1 1, 2, 3, 1A, 2A, 3A Type Normal Normal, Winter Material Composition White Fluid : Coaltar acids or similar acids derived from petroleum, Phenolic compounds and suitable emulsifier Black Fluid : Coaltar acids or similar acids derived from petroleum, Phenolic compounds and suitable emulsifier, White Fluid : Coaltar acids or similar acids derived from petroleum, Phenolic compounds and suitable emulsifier Ingredients Added NA Hydrocarbons, Substitut ed phenolic compounds, Hydrocarbons and Substituted phenolic compounds, NA Colour Colour White - Capacity Capacity (Litre) 5 Phenol Coefficient Phenol Coefficient Staphylococcal (SA) Coefficient - Value of Phenol Coefficient 5 - Packing Packing New, Sound Non- Returnable MS Drums conforming to IS:2552/89 grade B-1 and Inside of the drum shall be given suitable protective coating - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Nazir Baba 190001, Karan Nagar, Balgarden 200 15 EMD Required No ePBG 2/3 Required No

Light Emitting Diode LED Fixture- LED tube light Average Turn Over of Last 3 Years 400 Lakh (s) Experience with Gov. Required 10 Year (s) Light Emitting Diode LED Fixture- LED Tube Light ( 3000 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Led tube light power rating corresponding Min Luminious flux 20 Watt/2000 lumen 20 Watt/2000 lumen Colour Temperature (K) 6500 6500, 6500.0 Warranty for free replacement (Years) 2 years 2 years CONSTRUCTIONAL Type of Tube Light Cap G-13 Bi-pin - Ingress Protection in IP IP 20 - Lamp Shell material Polycarbonate Polycarbonate LED Fixture With Al back, front with polycarbonate/Acrylic diffuser more than 85%efficiency of lig With - Light Source SMD LED Chip - LED Make CREE/NICHIA/OSRAM SEOUL/PHILIPS LULEDS/LEDNIUM - Length of tube light (Nominal) (in mm) 1220 - 1/4 FUNCTIONAL LED lamp efficacy (Lm/W) 100 - Colour Rendering Inde (CRI) >/= 80 - Total Harmonics (%) </= 15% - LED Tubelight Life of 25000 hours predicted as per TM21 Report on Data obtained as per test conducted for 6000 hours as per LM80 Yes - Temperature Cycling test and supply voltage switching test (1) product shall be subjected to minus 10 degree C for 1 hour then switch to 50 degree C for 1 hour in total 5 cycles (2)30 sec ON and 30 sec Off At the end of test as per (1) and (2) no visual damage shall be observed and light should alight for more than 15 min after the test Yes - Beam Angle (Degree) >/= 120 degree - Operating Voltage range (Volt) 100-300 - Driver Efficiency (%) more than 85% - Surge Voltage withstand (KV) 2.5 KV - LED Chip Efficacy (Lm/W) 130 - Rated Voltage for Performance and life (Volt) 220-240 - Lumen Maintenance at 25 deg;C after 6000 hrs (%) 80% - LED Chip Wattage (Individual) (Watt) 0, 25 - Power Factor >/= 0.9 - CERTIFICATIONS BIS Registration certificate under (CRS) number and date CRS 2015-1707/R-64000035 DATE 27.07.2016 - 2/4 Certificare for Luminaire photometric data as per LM79 Yes - Certificate No and Date of Luminaire photometric data as per LM 79 report 29211170619KUNL2P5 000 DATE 22.06.2017 - Compulsory Registration and CRS of BIS for safety to IS 16102-I Yes - EMC Test Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mahesh Chand Bairwa 421502, Ordnance Factory Ambernath Ambernath, Thane 421502 3000 15 Required No ePBG Required No

lead acid battery Average Turn Over of Last 3 Years 40 Lakh (s) Experience with Gov. Required 10 Year (s) Lead Acid Battery ( 65 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Types of Lead Acid of Battery Lead-Acid Storage Batteries for Motor Vehicles conforming to IS:7372/1995 Lead-Acid Storage Batteries for Motor Vehicles conforming to IS:7372/1995, Lead-Acid Storage Batteries for Motor Vehicles with Light weight and High Cranking Performance conforming to IS:14257/1995 Nominal Voltage of Battery (volts) 12.0 Volt 12.0 Volt Material of container Polypropylene Fibre Reinforced Plastics (FRP), Polypropylene Rated Capacity at C20 discharge (AH) 180 180 Warranty (Years) 2 Years 2 Years Battery Condition Charged - CONSTRUCTIONAL Dimensions (L x W x H) (mm x mm x mm) As per relevant IS Specifications - Volume of Electrolyte 15900 ml - 1/3 (ml) Weight of Dry Battery (Kg) shall be as per relevant IS: Specn., corresponding Ah Yes. - No.of cells per Battery (No.) 6 Cells for 12 Volt battery - CERTIFICATIONS Availability of Test Reports from Central Govt./NABL/ILAC accrediated Lab showing conformity to the specifications Yes - Address of the Lab J C NAGAR, BANGALORE - Name of the Lab DGQA - Test Report No. CQAL/0027/L1301543G 2013 - Test Report Date 07/08/2016 - Compulsory Registration (CRS) of BIS for safety as per IS 16046 as applicable. Secondary Cells and (Batteries containing Alkaline or other non- acid Electrolytes-Safety Requirements for Portable sealed secondary cells, and for Batteries made from them for use in portable applications AS PER OEM - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ankit Palia 281001, 1 Corps OMC, Naroli chauraha, OD Complex 65 15

All in one All In One ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel - Processor Generation 6th 6th, 7th, 8th Processor Intel Core i5-6500 (3.2 GHz, 6 MB Cache, 4 Cores) As per GeM Catalogue. Chipset Chipset Intel H170 - Graphics Graphics type Integrated - Graphic Card Description Intel HD Graphic - Storage Type of Hard disk drive SATA SATA, SSD, Fusion Hard Disk Drive Size (GB) 500 500, 1000, 2000 Hard disk drive speed (RPM) 7200 - RAM Type of RAM DDR4 - RAM Size (GB) 4 4, 8, 16, 32 RAM Expandability Upto (GB) 32 8, 32, Not-Available Ram speed (MHz) 2133 - Operating System Operating system Windows 10 Windows 10 1/3 Professional Home, Windows 10 Professional, Linux, Mac OS Sierra, Mac OS High Sierra OS Certification Windows - Display Display Size (Inch) 23 Type of Display Touch Touch, Non Touch display resolution (Pixels) 1920 x 1080 1920 x 1080, 3200 x 1800, 1920 x 1080 with IPS Technology, Retina 4K Display (4096 x 2304) with IPS Technology, Retina 5K Display (5120 x 2880) with IPS Technology, 1600 x 900 TCO Certification Yes - Ports USB Port 2.0 (No.) 0 - USB Port 3.0 (No.) 6 - VGA Port Not-Available - HDMI Port Not-Available - Thunderbolt Port (No.) Not-Available - Display Port Available - Input Devices Keyboard Standard with USB Interface - Mouse Optical Scroll with USB Interface - Audio Integrated Stereo Sound with internal speakers & Mic. - Connectivity Wi-fi Connectivity 802.11 ac - Bluetooth Connectivity 3.0 - LAN Port Integrated Gigabit Ethernet 10/100/1000 - Certification BIS Registration under CRS of Meity Yes - BIS Registration no - - Certifications Available Energy Star - ROHS Compliance Yes - Power Maximum Wattage (Watts) 180 - Power Efficiency (%) Minimum 80 - Others Webcam Full HD - DVD R/W Available - 2/3 Optical drive Integrated - Stand Standard - On Site OEM Warranty (Year) 3 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sivanath Kumar P 284001, 1 Armd Engr Regt, near Bhattagaon Village 1 15

OEM Cartridge/Consumable OEM Cartridge/Consumable ( 42 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 88A Black Original LaserJet Toner Cartridge - Corresponding Part number/code CC388AC - Printer Model number/numbers for which Cartridge is suitable HP LaserJet M1136 MFP Printer, HP LaserJet M1136 MFP Value Bundle, HP LaserJet M1213nf MFP Printer, HP LaserJet M1216nfh MFP Printer, HP LaserJet P1007 Printer, HP LaserJet P1008 Printer, HP LaserJet P1106 Printer, HP LaserJet P1108 Printer, HP LaserJet Pro - 1/3 M1218nfs MFP Printer, HP LaserJet Pro M202dw Printer, HP LaserJet Pro M202n Printer, HP LaserJet Pro MFP M126nw Printer, HP LaserJet Pro MFP M128fn Printer, HP LaserJet Pro MFP M128fw Printer, HP LaserJet Pro MFP M226dn Printer, HP LaserJet Pro MFP M226dw Printer Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1500 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Harish Chandra Pandey 110085, Institutional Area, Sector-3, Rohini 42 15

air purifiers Average Turn Over of Last 3 Years 10 Lakh (s) Air Purifiers ( 3 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Independent certifying agency name na - CADR Characteristics Whether CADR is certified by independent agency such as AHAM/JAM GB/Independent Labs false Clean air delivery rate (CADR) at maximum speed (Minimum) (Cubic metre/hr) 251 - 300 As per GeM Catalogue. Number of Stages Number of Air cleaning stages (Filtration stages) (Nos.) 2 2, 3, 4, 5, 6 or more Physical Characteristics Pre-filter true HEPA (High Efficiency Particular Arrestance) Filter false Activated carbon filter false Ionizer false 1/3 Timer true Speed mode true Auto mode true Remote Control Without With, Without * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 SHREEKRISHNA MATE 400012, NATIONAL INSTITUTE FOR RESEARCH IN REPRODUCTIVE HEALTH JEHANGIR MERWANJI STREET, PAREL MUMBAI 400012 MAHARASHTRA 3 15 Required No ePBG Advisory Bank State Bank of India ePBG Percentage(%) 2.00 Duration of ePBG required (Months). 38

Air Conditioner

Air Conditioner

Desktops

computer kiosk Computer Kiosk ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Type Of Information Kiosk Processor Based Thin Client Based, Processor Based Type Of Enclosure Mild Steel Mild Steel, Stainless Steel Thickness of Enclosure (mm) 1.6 - Chassis Screwless - Mounting Floor mount - Configuration Processor Make Intel AMD, Intel Processor Configuration Dual Core or higher Dual Core or higher, Embedded Processor Speed (GHz) 3.2 Operating System (Pre-loaded) Window 10 Window 8.1, Window 10 Memory (GB) 4 Storage/HDD (GB) 500 Display Display Size (inches) 21.5 Display Type Color LED touch Screen Color LED touch Screen, Color LCD touch Screen Touch Type Capacitive Resistive, Capacitive, Su 1/3 rface Acoustic Wave (SAW) Antiglare & Overlay Tempered vandal resistant glass thickness (mm) 3 - Screen Resolution (pixels) 1920 x 1080 1280 x 1024, 1920 x 1080 Brightness (Nits) 350 - Ports USB Port 2, 0 3 - USB 3 or Higher 1 - VGA Port Yes - LAN Port Yes - Audio In and Out Yes - Options Standard Keyboard with USB Interface Available - Thermal Printer with 80 mm paper width and with Auto Cutter Not included - Certification BIS Registration under CRS of Meity for Data Processing Unit Yes - BIS Registration Number for Data Processing Unit 00 - BIS Registration for Thermal Printer NA - BIS Registration Number for Thermal Printer 00 - Safety Certification ( For CPU and Display) YES - Miscellaneous Speakers Yes - Weight (Kg) 90 - Optical Disk Drive External - Overall Dimensions (cm x cm x cm) 134.62 x 124.46 x 63.5 - Maximum Power Consumption(In Watt) 120 - Operating Temperature Range(In Degree C) 40 - Operating Humidity(In %) 90 - On Site OEM Warranty (Year) 1 1, 2 2/3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dr.Hanumant Singh Chouhan 307026, S.M.C.C. COLLEGE ABUROAD, PALANPUR ROAD, KESARGANJ, ABUROAD 2 15 Required No ePBG Required No

domestic refrigerators Domestic Refrigerators ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Conformity to Indian Standrad IS:1476 latest for Direct Cool IS:1476 latest for Direct Cool ISI marked false - CML No. 0 - Capacity and Design features Storage Volume(NET CAPACITY) (Litres) 165 165 Type of Door Single Single Insulation Puff Puff, Polyurethane, Maxi 2, others Built in Voltage Stabilizer Yes - Method of Defrosting Direct Cool Direct Cool, Frost Free Performance BEE Star Rating as on date 3 3 Eco-friendly refrigerant yes - Compressor Power saver Compressor - Voltage Range at 43 degree Centigrade (Volts) 230 (tolerance 10%) - Material Coil Material Copper (Cu) Copper (Cu) 1/2 Finish and Colour Type of Finish Metallic Metallic, Matt, Printed Design Colour Red As per GeM Catalogue. * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dr.Hanumant Singh Chouhan 307026, S.M.C.C. COLLEGE ABUROAD, PALANPUR ROAD, KESARGANJ, ABUROAD 2 15 Required No ePBG Required No

Security Manpower Service

Human Resource Service

USB Camera for Video Conferencing System USB Camera For Video Conferencing System ( 16 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Type of USB Camera for Video Conferencing System USB Camera with Integrated Speaker Phone USB Camera with Integrated Speaker Phone, USB Camera without Speaker Phone Type of Camera & Speaker Phone Combination All in one USB Conference Camera for Small to Mid Sized Room with Digital Zoom with Remote All in one USB Conference Camera for Small to Mid Sized Room with Digital Zoom with Remote Resolution Full HD(1920 x 1080 progressive signal) Full HD(1920 x 1080 progressive signal) Compression Format H.264 - Frame Rate 30 fps 30 fps Zoom Range Optical 2X - Zoom Range Digital 1.2X - Field of View (Degree) 90 - Controls Settings of PAN, TILT and Zoom Yes - Remote Control Yes - Integrated Speakers Yes - Number of MICS 1 - Auto Focus Yes - 1/3 UL/CE certification - - Certifications available NA - Operating Temperature Range (Degree C) 18 - Operating humidity (Rh %) 0 - Installation & Commissioning No - Availability of Test Reports from Central Government/NABL approved/ILAC acredited lab to prove conformity to the specification (Test reports are to be furnished when demanded by buyer) No - On Site OEM Warranty (Year) 1 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sanjay Kumar Srivastava 110016, 2nd Floor, NCUI Building, Sri Institutional Area, August Kranti Marg, New Delhi- 110016 16 15

Multifunction Machines

fume hoods for laboratory with cubboard Fume Hoods For Laboratory With Cubboard ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values DIMENSIONS, FEATURES Size of Sink (mm) 300 - Power Rating - - Drawing No. - - Product Code available on Web - - Safety Device Trip (Nos) - - Material of Base Cabinet - - Working Platform Material - - Double wall Construction Yes - Ducting Material - - Details of Electrical outlets - - Product Code No - - Air Flow (Cubic metre/hr) 100 - Width of Base Cabinet (mm) 300 Material of Front Toughned Float Glass Toughned Float 1/4 shutter Glass, other Overall lenth of Fumehood (mm) 600 Base Cabinets With With, Without Ducting for hood With With, Without Efficiency &amp; Noise level of Blower (%, dB) - - Thickness of wall (mm) 10 Operating Temperature of Fumehood (&deg;C) 50 - Material of Fumehood - - No. of Drawers in the Base Storage Unit (Nos) 0 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 Fumehood installation Kit and Accessories With With, Without Height of Base Cabinet (mm) 600 Type of Filter - - Type of Fumehood Laboratory - Length of Base Cabinet (mm) 1200 Fire Resistant false Utility Pipe lines for Nitrogen, Compresse d Air &amp; Water etc. true Face Velocity (m/s) 0.45 - Type of Fumes suitable for - - Overall Width of Fumehood (mm) 600 - Design of base Cabinet - - Wattage of Blower (W) - - Material of sink - - Overall Height of Fumehood (mm) 600 - Type of Blower - Design details of baffles - - Design details of Electrical Services - - 2/4 No. of Electrical Socket and Switch (Nos) - - Material of the Blower - - Working Platform Thickness (mm) - - Provision of Electrical Outlets true Drawing available on Web false Features of various Utilities - - CONFIGURATION Fumehood Baffles With With, Without Front shutter Fumehood With With, Without Material of Insulation - - Type of Base cabinets Movable with Wheels Movable with Wheels, Movable without Wheels Non Corrosive treatment of inside compartment true - Availability of Sink With With, Without No. of Shutters (Nos) 1 1, 10 No. of Shelves in Base storage units (Nos) 1 1, 10, 0 Materials of Baffles - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 S Zangkhohao Mate 500048, Plot 366/1, Near Pillar No 162 left side Freshwater Biology Regional Centre Zoological Survey of India Hyderguda Attapur Hyderabad 1 15 EMD Required No ePBG Required No 3/4

Notebook Computers-laptop Notebook Computers-laptop ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel Intel Processor Generation 7 th 7 th Processor Intel Core i5-7200U (upto 3.1 GHz, 3 MB cache, 2 cores) As per GeM Catalogue. Graphics Graphics Type Integrated - Graphics Card Description Intel Iris Plus Graphics 650 - Graphics Memory (GB) 1 GB - Memory Type of RAM LPDDR3 on Board - RAM Size (GB) 8 8 RAM Expandable upto (GB) 16 16 RAM Speed (MHz) 2133 - Storage Type of Hard Disk Drive PCIe-based onboard SSD SATA, SSD, Fusion, PCIe- based onboard SSD Hard Disk Drive Size( GB) 512 128, 256, 512, 500, 1000, 2000 Hard Disk Drive Speed (rpm) null - Operating System Operating System Mac OS Sierra or Latest Windows 10 1/3 Home, Windows 10 Professional, Linux, Mac OS Sierra or Latest, DOS Ports USB 3.0 or higher (No.) 0 - USB Type C Available - VGA Port Not-Available - HDMI Port Not-Available - DISPLAY PORT Available - Thunderbolt Port 3 - Connectivity Network Connectivity Ethernet Gigabit 10/100/1000 - Wi-fi Connectivity 802.11 ac - Bluetooth 4.0 or higher - Display Display Type Touch - Display Size (Inch) 13.3 13.3 Display Resolution (Pixel) 2560 x 1600 1366 x 768, 1440 x 900, 1920 x 1080, 2304 x 1440, 2560 x 1600, 2736 x 1824, 2880 x 1800, 3200 x 1800, 3840 x 2160 Certification BIS Registration under CRS of Meity Yes - BIS Registration no. - - BEE/Energy Star Certification - - ROHS Compliance Yes - Additional feature Finger Print Reader Yes - Webcam (HD or Better) Available - Miscellaneous Optical Drive not available - Keyboard Backlit - Trusted Platform Module Enabled Yes - Weight (With Battery) (Kg) 1 - Carry Case Not Included Included, Not Included Power Battery Type (Li-Ion/Li- Polymer) Built-in - Battery Back-up (Hours) 10 - Warranty Battery Warranty (Year) 1 1, 3 2/3 On Site OEM Warranty (Year) 1 1, 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramnath Kacheshwar Sonawane 440001, Shree Chatrapati Shivaji Maharaj, New Administrative Building, NMC, Civil Lines Nagpur 1 15

Desktops

Desktops

Speaker Stand

forklifts

forklifts

Notebook Computers-laptop Experience with Gov. Required 2 Year (s) Notebook Computers-laptop ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel Intel Processor Generation 7 th 7 th Processor Intel Core i5-7200U (upto 3.1 GHz, 3 MB cache, 2 cores) As per GeM Catalogue. Graphics Graphics Type Integrated - Graphics Card Description Intel Iris Plus Graphics 650 - Graphics Memory (GB) 1 - Memory Type of RAM LPDDR3 on Board - RAM Size (GB) 8 8 RAM Expandable upto (GB) 16 16 RAM Speed (MHz) 2133 - Storage Type of Hard Disk Drive PCIe-based onboard SSD SATA, SSD, Fusion, PCIe- based onboard SSD Hard Disk Drive Size( GB) 512 128, 256, 512, 500, 1000, 2000 Hard Disk Drive Speed (rpm) null - 1/3 Operating System Operating System Mac OS Sierra or Latest Windows 10 Home, Windows 10 Professional, Linux, Mac OS Sierra or Latest, DOS Ports USB 3.0 or higher (No.) 0 - USB Type C Available - VGA Port Not-Available - HDMI Port Not-Available - DISPLAY PORT Available - Thunderbolt Port 3 - Connectivity Network Connectivity Ethernet Gigabit 10/100/1000 - Wi-fi Connectivity 802.11 ac - Bluetooth 4.0 or higher - Display Display Type Non Touch - Display Size (Inch) 13.3 13.3 Display Resolution (Pixel) 2560 x 1600 1366 x 768, 1440 x 900, 1920 x 1080, 2304 x 1440, 2560 x 1600, 2736 x 1824, 2880 x 1800, 3200 x 1800, 3840 x 2160 Certification BIS Registration under CRS of Meity Yes - BIS Registration no. - - BEE/Energy Star Certification - - ROHS Compliance Yes - Additional feature Finger Print Reader Yes - Webcam (HD or Better) Available - Miscellaneous Optical Drive not available - Keyboard Backlit - Trusted Platform Module Enabled Yes - Weight (With Battery) (Kg) 1 - Carry Case Not Included Included, Not Included Power Battery Type (Li-Ion/Li- Polymer) Built-in - Battery Back-up (Hours) 10 - Warranty Battery Warranty 1 1, 3 2/3 (Year) On Site OEM Warranty (Year) 1 1, 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramnath Kacheshwar Sonawane 440001, Shree Chatrapati Shivaji Maharaj, New Administrative Building, NMC, Civil Lines Nagpur 1 15

Desktops Desktops ( 35 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel Intel, AMD Processor Generation 7th 6th, 7th, 8th Processor Intel Pentium G4560 (3.5 GHz, 3 MB Cache, 2 Cores) Intel Core i3-6100 (3.7 GHz, 2 Cores), Intel Core i3-6300 (3.8 GHz, 4 MB Cache, Intel Core i3-6320 (3.9 GHz, Intel Core i5-6400 (2.7 GHz, 6 MB Cache, 4 Cores), Intel Core i5-6500 (3.2 GHz, Intel Core i5-6600 (3.3 GHz, Intel Core i7-6700 (3.4 GHz, 8 MB Cache, AMD A4-7300 (3.8 GHz, 1 MB Cache, AMD A4-8350B (3.5GHz, AMD A6-7400 (3.5GHz, AMD A6-8550B 1/7 (3.7 GHz, AMD A6-9500 (3.5 GHz, AMD A8-7600 (3.1 GHz, AMD A8-8650B (3.2 GHz, AMD A10-7800 (3.5GHz, AMD A8-9600 (3.1 GHz, 2 MB Cache, AMD A10-8750B (3.6 GHz, AMD A10- 9700 (3.5 GHz, 4 Cores ), AMD A12-9800 (3.8 GHz, Intel Core i5-7500 (3.4 GHz, Intel Core i7-7700 (3.6 GHz, Intel Core i3-7100T (3.4 GHz, Intel Core i3-7100 (3.9 GHz, Intel Core i3-7101E (3.9 GHz, Intel Core i3-7101TE (3.4 GHz, Intel Core i3-7300 (4 GHz, Intel Core i3-7300T (3.5 GHz, Intel Core i3-7320 (4.1 GHz, Intel Core i3-7350 (4.2 GHz, Intel Core i5-7400T (2.4 GHz, Intel Core i5-7400 (3.0 GHz, Intel Core i5-7500T (2.7 GHz, Intel Core i5-7600T (2.8 GHz, 4 2/7 Cores), Intel Core i5-7600K (3.8 GHz, Intel Core i5-7600 (3.5 GHz, Intel Core i7-7700T (2.9 GHz, Intel Core i7-7700K (4.2 GHz, AMD Ryzen 5 1400 (3.2 GHz, 4 Core), AMD Ryzen 5 1600 (3.2 GHz, 16 MB Cache, 6 Core), AMD Ryzen 5 1500 (3.5 GHz, AMD Ryzen 3 1200 (3.1 GHz, AMD Ryzen 3 1300 (3.5 GHz, Intel Pentium G4560 ( 3.5 GHz, Intel Core i3-8100 (3.6 GHz, Intel Core i3-8350K (4.0 GHz, Intel Core i5-8400 (2.8 GHz, 9 MB Cache, 6 Cores), Intel Core i5-8600K (3.6 GHz, Intel Core i7-8700 (3.2 GHz, 12 MB Cache, Intel Core i7-8700K (3.7 GHz, Intel Pentium Silver J5005 (1.5 GHz, Intel Pentium G4600T (3.0 GHz, Intel Pentium G4600 (3.6 GHz, Intel Pentium G4560T (2.9 GHz, Intel Pentium G4560 (3.5 GHz, Intel Celeron J4005 (2.0 GHz, 4MB 3/7 Cache, Intel Celeron J4105 (1.5 GHz, 4MB Cache, Intel Celeron G3930 (2.9 GHz, 2MB Cache, Intel Celeron G3930E (2.9 GHz, Intel Celeron G3930T (2.7 GHz, Intel Celeron G3930TE (2.7 GHz, Intel Celeron G3950 (3.0 GHz, AMD PRO A6-8570E (3.0 GHz, 2 Core), AMD PRO A6-9500E (3.2 GHz, AMD PRO A8-8670E (2.8 GHz, AMD PRO A10-8770E (2.8 GHz, AMD PRO A10-9700E (3.0 GHz, AMD PRO A12-8870E (2.9 GHz, AMD PRO A12-9800E (3.1 GHz, Intel Celeron N 3350 (2.4 GHz, AMD Ryzen 3 PRO 2200GE (3.2 GHz, AMD Ryzen 3 PRO 2200G (3.5 GHz, AMD Ryzen 5 PRO 2400GE (3.2 GHz, 8 Core), AMD Ryzen 5 PRO 2400G (3.6 GHz, Intel Core i5-8500 (3.0 GHz, 6 Cores) Motherboard Chipset Intel H110 Intel H110, Intel H170, Intel Q150, Intel Q170, Intel B170, Intel Z170, AMD A Series, AMD B SERIES, Intel Q270, Intel B250, Intel Q250, Intel H270, Intel Z270, Intel X299, Intel Z370, Intel 4/7 H370, Intel Q370, Intel B360, Intel H310 Expansion Slots (PCIe x 1) (Number) 1 - Expansion Slots (PCIe x 4) (Number) 0 - Expansion Slots (PCIe x 16) (Number) 1 - Graphics Graphics Type Integrated - Graphic Memory N/A - Operating System Operating System (Pre-Loaded) Windows 10 Professional Windows 10 Profession al, Linux, DOS, Windows 10 Home, Windows 10 Professional under Microsoft Shape the Future Program RAM Type of RAM DDR 4 - RAM Size (GB) 4 4, 8, 16, 32 RAM Expandability upto (GB) 32 16, 32, 64 RAM Speed (MHz) 2400 - Storage Hard Disk (GB) 1000 500, 1000, 2000 Cabinet Cabinet Tower - Cabinet Volume (Litres) - - Internal Bays 2 - External Bays (Number) 2 - DIMM Slots (Number) 2 - Connectivity Wireless NA - Network Connectivity 10/100/1000 on board Integrated Gigabit Port - Ports USB Port 2.0 (Number) 4 - USB Port 3.0 (Number) 4 - Serial Port true - Parallel Port false - VGA true - HDMI true - Display Port false - Monitor Monitor Size (INCHES) 18.5 18.5, 19.5, 21.5, 24, 27 Monitor Resolution (PIXELS) 1366x768 1366x768, 1920x1080, 3 200x1800, 3840 x 2160, 1440 x 900, 1600 5/7 x 900 Monitor Certification - - Power Power Supply (Watt) - - Minimum Power Efficiency(%) 85 - Certification ROHS Compliance Yes - BEE/Energy Star for the given Model true - Input Devices Mouse Optical - Keyboard Standard - Generic Optical Drive N/A - Internal Speaker false - On Site OEM Warranty (Year) 3 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajeev Trivedi 737134, ADVANCED TECHNICAL TRAINING CENTRE, BARDANG, P.O. SINGTAM EAST SIKKIM 35 15 EMD Required No ePBG Required No

revolving chair Revolving Chair ( 50 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt central tilt, push back, knee tilt synchronic, central tilt synchronic, only revolving without tilting mechanism, 360 Degree swivel, posture control with multilocking position synchronized mechanism, Bio Synchronic, Advance Bio Synchronic, Auto return mechanism, Forward Tilt Mechanism, Forward tilt synchronic mechanism Tilt Tension Adjustment true - Height Adjustment ± 5(mm) up to 120 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm Arm With With, Without Type of backrest support backrest with lumber support of polypropylene at multilevel across back backrest with lumber support of polypropylene at multilevel across back, backrest 1/6 symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black - Ergonomic Seat Design true Back type push back push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of one piece injection moulded frame - backrest has separate adjustable headrest false Seat type fixed fixed, sliding Seat is curved true - Locking mechanism true - Type of locking 3-Position Locking - Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon 2/6 Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material Proypylene steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Pr oypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU foam covered with mesh fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 45 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 45 - Material of Fabric Back Cover mesh fabric mesh fabric, Innner frame Upholstered with Mesh fabric and 3/6 mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leathe rite, N.A Material of Fabric of Seat Cover foam laminated mesh fabrics foam laminated mesh fabrics, Mesh Fabrics, leatherite, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 250 gram - DIMENSION Overall Chair Height ±15mm 990 670, 710, 760, 810, 860, 8 90, 920, 950, 990, 1025, 1 050, 1080, 1125, 1140, 1 180, 1220, 1250, 1280, 1 310, 1330 Backrest Height ±15mm 550 460, 500, 520, 550, 570, 6 00, 730, 800, 410, 43 0, 650, 690 Backrest Width ±10mm 550 410, 440, 480, 5 50, 680, 700, 720 Seat Height ±15 mm 450 420, 450, 520 Seat Width ±10 mm 500 440, 4 60 Seat Depth ±10 mm 550 400, 460, 420, 540 Thickness of M S Plate Joining the under structure with Seat 2 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1, 1.2, 1.4, 1.6, 1. 8, 2, 2.2 Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 600 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 50 mm 25 mm, 30 mm, 35 mm, 45 mm, 50 mm, 55 mm, 60, 70, 120 Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 50 mm 25 mm, 120 4/6 WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4- year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO Green guard certification YES YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajeev Trivedi 737134, ADVANCED TECHNICAL TRAINING CENTRE, BARDANG, P.O. SINGTAM EAST SIKKIM 50 30 EMD Required No ePBG Required No

air purifiers Average Turn Over of Last 3 Years 10 Lakh (s) Air Purifiers ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Independent certifying agency name NA - CADR Characteristics Whether CADR is certified by independent agency such as AHAM/JAM GB/Independent Labs false Clean air delivery rate (CADR) at maximum speed (Minimum) (Cubic metre/hr) 151 - 175 As per GeM Catalogue. Number of Stages Number of Air cleaning stages (Filtration stages) (Nos.) 2 2, 3, 4, 5, 6 or more Physical Characteristics Pre-filter true HEPA (High Efficiency Particular Arrestance) Filter false Activated carbon filter false Ionizer false 1/3 Timer true Speed mode true Auto mode true Remote Control Without With, Without * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 SHREEKRISHNA MATE 400012, NATIONAL INSTITUTE FOR RESEARCH IN REPRODUCTIVE HEALTH JEHANGIR MERWANJI STREET, PAREL MUMBAI 400012 MAHARASHTRA 2 15 Required No ePBG Required No

Wireless Access Point

Layer 2 Access Switch Layer 2 Access Switch ( 13 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Type of Switch Managed Managed, UnManaged, Web Managed Technology PoE PoE, Non PoE, PoE+, UPoE Number of 1G Copper Ports 24 8, 12, 16, 24, 48, 0 Number of 10G Copper Ports 0 No. of 1 G SFP Port (Uplink) 4 No. of 10 G SFP+ Port (Uplink) 0 Multi-Gigabit Support No Yes, No Redundant Power supply ( from day one) Not available Available, Not available, Supported & Part of Supply, Supported Console Port Available - Switching Capacity -Non Blocking (Gbps) 56 - Throughput (MPPS) 83 - Operating System available - 1/3 Dedicated Stacking Port/Slot ( from day one) Not available - Stacking Bandwidth (Gbps) 0 - Basic Layer-3 Protocol N/a - Security Feature Switch should be 24Ports Gigabit Ethernet with 12 ports PoE. Centralized controller should support IEEE 802.1X, Policy Control of Users and Devices from central management system, Black listing and While Listing of MAC address from central management system. Central management system should support device detection based on OS fingerprinting. - Management Protocol IPv4 & IPv6 mgmt; Telnet/SSH, HTTP/HTTPS, SNMP v1/v2c/v3 and support HTTP REST APIs - QoS Not Supported - Operating Temperature Range (Degree C) 0 - 40 - Operating Humidity (RH)(%) 10 - 90 - IPv6 Ready from day one and dully certified Yes - PoE Power Budget ( Watt ) 100 - on Site OEM Warranty 5 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pramod Bharat Moghe 400051, M.M.R.D.A. OFFICE BUILDING, 5th Floor, B-Wing, IT CELL BANDRA-KURLA COMPLEX, C-14 & 15, E BLOCK BANDRA (EAST), 13 15 2/3 MUMBAI - 400 051 Required No ePBG Required No

lead acid battery Lead Acid Battery ( 148 ) Technical Specifications Specification Specification Name Values Allowed Values * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Balwant Rai 110001, Gate No.5, Khurshid lal Bhawan, Janpath, New Delhi 110001 148 15 EMD Required No ePBG Required No

Printer

Desktops

revolving chair Average Turn Over of Last 3 Years 5 Lakh (s) Experience with Gov. Required 2 Year (s) Revolving Chair ( 15 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt central tilt Tilt Tension Adjustment true - Height Adjustment ± 5(mm) up to 120 mm up to 120 mm Arm With With Type of backrest support backrest with lumber support of polypropylene at multilevel across back backrest with lumber support of polypropylene at multilevel across back Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black - Ergonomic Seat Design true Back type push back push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of two pcs injection moulded frame - backrest has separate adjustable false 1/5 headrest Seat type fixed fixed Seat is curved false - Locking mechanism true - Type of locking upright locking - Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels 2/5 Arm Material steel covered with polyurethane steel covered with polyurethane seat material PU Foam covered with Fabric PU Foam covered with Fabric Density of PU foam used in seat KG per Cu Meter (+/- 3) 45 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 45 - Material of Fabric Back Cover 100% polyester fabric 100% polyester fabric Material of Fabric of Seat Cover 100% polyester fabric 100% polyester fabric GSM/Thickness of fabric ±5%(Gram/Square meter) N.A - DIMENSION Overall Chair Height ±15mm 990 990 Backrest Height ±15mm 430 430.0 Backrest Width ±10mm 440 440.0 Seat Height ±15 mm 420 420 Seat Width ±10 mm 480 480 Seat Depth ±10 mm 480 480.0 Thickness of M S Plate Joining the under structure with Seat 2 2.0 Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm Padestal Size (Diameter in mm) +/- 10 mm 650 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 25 mm 25 mm Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 25 mm 25 mm 3/5 WARANTEE Warrantee period in number of years 1-year 1-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES OEM of offered product is ISO 9001:2015 certified YES YES OEM of offered product is ISO 14001:2015 certified YES YES OEM of offered product is ISO 18001:2007 certified YES YES Green guard certification YES YES Aiota - YES * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 ELAKIYA A 600034, 34, HEPC BUILDING, CATHEDRAL GARDEN ROAD, NUNGAMBAKKAM CHENNAI 15 15 EMD Required No ePBG Required No

steel pipes for water and sewage Average Turn Over of Last 3 Years 10 Lakh (s) Experience with Gov. Required 2 Year (s) Steel Pipes For Water And Sewage ( 1000 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Conformity to Indian Standard IS 3589:latest Yes - ISI Marked true CML Number 8417881 - Manufacture, Material and Coating Method of Manufacturing Seamless Seamless, Electric Resistance Including Induction Welding, Submerged Arc Welded Including Spirally Welded (SAW) Grade of Steel Fe330 Fe330, Fe410, Fe450 Type of Coating Zinc Coating Without Coating, Zinc Coating, Cement Mortar Protective Linning and Coating, Liquid Epoxy Coating, Fusion Bonded Epoxy Coating, Hot Applied Tape Coating, Cold Applied Tape Coating Dimension Outside Diameter of Pipe (mm) 273 168 3, 219 1, 273, 323 9, 355 6, 406 4, 457, 508, 610, 711, 813, 914, 1016, 1/3 1067, 1118, 1219, 1422, 1626, 1829, 2032, 2235, 2540 Thickness of Pipe (mm) 3 2 2 6, 3 2, 3.6, 4.0, 4.5, 5.0, 5.6, 5.8, 6.3, 7.1, 8.0, 8.8, 10.0, 11.0, 12.5, 14.2, 16. 0, 17.5, 18.0, 20.0, 22.2, 2 5.0 Mass of Pipe per meter 31.8 10.6, 12, 13.9, 18.2, 19.1, 23.8, 23.9, 26.5, 31.8, 33, 33.1, 34.7, 35.4, 39.7, 41. 1, 43.2, 44, 44.7, 48.3, 49. 5, 55.5, 55.7, 62, 62.2, 68. 6, 69.4, 70, 77.9, 83.5, 86. 3, 93.8, 109, 110, 123, 14 1, 159, 179, 184, 186, 196, 219, 223, 230, 241, 248, 251, 298, 300, 328, 3 72, 387, 435, 491, 493, 56 4, 634, 635, 715, 782, 795, 869, 957, 992, 1092, 121 1, 1243, 1379, 1551 Length of Pipe (Metres) 6.0 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 5.5, 6.0, 6.5, 7.0, 7.5, 8.5, 9.0, 9.5, 10.5, 11.5, 12. 0, 13.0, 13.5, 14.0 Type of Joint Pipe Ends for Joint Plain Ends Plain Ends, Bewelled Ends, Sleeve Joints, Swelled Test Report Availability of Test Reports of from Central Govt./State Govt/NABL/IL AC accredited Lab to prove conformity to the Specification YES - Test Report No 477 - Test Report Date 3.2018 - Name of the Lab PSST STEEL TUBE LTD - Address of the Lab RAJNANDGAON, CHATTI SGARH - Test report to be furnished to the buyer on demand YES - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 2/3 1 Preeti Ogrey 495223, nagar palika parisad tifra 1000 15 EMD Required No ePBG Required No

Submersible Pump Set Three Phase Average Turn Over of Last 3 Years 1 Lakh (s) Experience with Gov. Required 1 Year (s) Submersible Pump Set Three Phase ( 3 ) Technical Specifications Specification Specification Name Values Allowed Values GENRIC Conformity to Indian Standrad for Submersible Pump Set ISI Marked Submersible Pumpsets to IS:8034 latest for use in borewells for handling clear cold water having ISI Marked motor to IS:9283 latest of wet type for continuous rating synchronous, Cat egory-B, Duty Type-S1 - Bore Size 100 - Delivery Size 50 - CONSTRUCTION Nos of Stages for submersible pump 15 - Pump shaft Stainless steel grade X 04 Cr 12/X 12 Cr 12 X 20 Cr 13 of IS 6603 - Shaft Sleeve Bronze grade LTB 2, 3, 4 or 5 of IS 318 - Suction Casing Cast iron grade FG 200 of IS 210 - Casing wear ring (if N/A - 1/4 provided otherwise choose N/A) Bush Bronze grade LTB 2, 4 or 5 of IS 318 or Nitrile cutless rubber - Discharge casing (if provided otherwise choose N/A) N/A - Impeller Bronze grade LTB 2 of IS 318 - Maximum outer diameter of the pumpset including the cable guard 50 - Details of Power Supply Three Phase, 415 V +6 %, 15%Volts, 50Hz±3% Hz - Type of motor ISI Marked to IS:9283 latest of wet type for continuous rating synchronous, Type B, Duty Type-S1 - Numbers of poles of motor 2 pole - Motor rating 2.2 0.75, 1.1, 1.5, 2.2, 3.7, 4 .5, 5.5, 7.5, 9.3, 11, 13, 15 Maximum current at rated voltage and frequency 3.25 2.25, 3.25, 4.5, 6.5, 8.5, 1 0, 12, 14.5, 19.5, 25, 29, 3 4, 39 Control Pannel with starter, ISI marked MCB main switch, ammeter, voltmeter and water level indicator and single phase preventer Yes - Non return valve Yes - Erection clamp Yes - ISI marked submersible cable 4 core flat with Copper conductor to IS: 694 3 - PERFORMANCE Discharge capacity (LPS) 1.33 1, 1.33, 1.66, 2, 2.5, 3.33 Discharge Head 50 40, 50, 60, 70, 80, 90, 100, 110, 120 Speed of Pump (rpm) 1400 - BEE Energy Star Rating 3 Star - Overall Efficiency of 90 - 2/4 Submersible Pump Set at duty point (%) Performance Factor of the Pump Set >= 1.10 & < 1.15 for 3 star - Weight of Pump set 18 - CERTIFICATION BIS CM/L number and validity of ISI marked Submersible Pump Set 7462174 - Availability of Type Test Report to prove conformity of parameters to the specification from any ILAC/NABL accredited/Central Govt lab YES - Test certificate No and date 00456 052018 - Name of the Lab where test Conducted CROMPTON PUMP LTD - Test Report to be furnished to the buyer on demand Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Preeti Ogrey 495223, nagar palika parisad tifra 3 15 EMD Required No ePBG Required No

Submersible Cable for Submersible Pumps (Insulated or covered cable) Average Turn Over of Last 3 Years 10 Lakh (s) Experience with Gov. Required 4 Year (s) Submersible Cable For Submersible Pumps (Insulated Or Covered Cable) ( 1000 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Cable Type THREE CORE FLAT CABLES WITH PVC INSULATION AND SHEATHED with multistrand flexible Copper Conductor FOR Submersible Pumps (FORMAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C) duly ISI marked to IS:694 latest TWO CORE FLAT CABLES WITH PVC INSULATION AND SHEATHED with multistrand flexible Copper Conductor FOR Submersible Pumps (FOR MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C) duly ISI marked to IS:694 latest, THREE CORE FLAT CABLES WITH PVC INSULATION AND SHEATHED with multistrand flexible Copper Conductor FOR Submersible Pumps (FORMAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C) duly ISI marked to IS:694 latest 1/3 CONSTRUCTION Size of Cable (Sqmm) 2.5 2.5, 4, 6, 10, 16 Number of cores 3 - Material of conductor Copper(EC grade) - Shape of conductor Stranded - Insulation Type C — Heat- resistant cables (HR) as per IS 5831 latest - Sheath "Type ST2 — cables sheathed with 85°C HRPVC compound to IS 5831 latest" - In addition to marking requirements as per relevant specification, sequential marking for length, Size of the cable, Type of the cable shall be embossed on every metre of the cable YES - standard cable length in a Coil/Reel 100 - Part length which can be supplied by seller 10 - CERTIFICATION BIS marked YES - BIS certificate number - - Availability of Type test report from Central government/NABL/ILAC accridiated laoratory to prove conformity to the specification for minimum and maximum ratings YES - Type Test Certificate No - - Type Test Certificate date - - Name of Lab - - Address of Lab - - Test Report to be furnished to the buyer on demand YES - * Bold specifications are the golden parameters. Consignees and Quantity 2/3 S.No. Consignee Address Quantity Delivery Days 1 Preeti Ogrey 495223, nagar palika parisad tifra 1000 15 EMD Required No ePBG Required No

waste containers or rigid liners- Dust bin or Garbage Bin or Household Bin Average Turn Over of Last 3 Years 10 Lakh (s) Waste Containers Or Rigid Liners- Dust Bin Or Garbage Bin Or Household Bin ( 100 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Utility Public (Mobile containers confirming IS: 12402) Domestic, Public (Mobile containers confirming IS: 12402) ISI Marked No yes, No CM/L No (If ISI Marked Yes) (If No write NA) NA - Class confirming to IS:12402 (For Public Dustbins) NA - Material HDPE HDPE, LDPE, LLDPE, Corr osion free sheet metal, Stainless steel, Stainless Steel (with inner Plastic lining/bin) CAPACITY Bin Capacity (Volume) (Ltrs) 100 Litres 100 Litres DIMENSIONS Wheel Dimension in (mm) (Diameter x Thickness ) (mm x mm) na - Weight of Dustbin (Complete unit) 20000 - 1/3 (Grams) CONSTRUCTIONAL Colour green - Wheel Lock Without - Load carrying Capacity (Kgs) 100 - Wall Non- Perforated - Lid hindged - Handle With - Wheel Without - Wheel Material NA - Towage Provision no - Gripping Provision NA - Plugged outlet for washing & draining With - UV Resistant yes - Dust Bin stand with - No. of Compartments in the Bin single - CERTIFICATIONS Availability of Test Reports from Central Government/NABL/IL AC acredited Lab to prove conformity to the specifications yes - Test report number qms1803100 - Test report date 30/03/18 - Name and address of lab deutsche accreditation board - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sunil Kumar Sahdev 110009, Rajan Babu Institute of Pulmonary Medicines & Tuberculosis KINGSWAY CAMP 100 15 EMD Required No ePBG Required No 2/3

waste containers or rigid liners- Dust bin or Garbage Bin or Household Bin Average Turn Over of Last 3 Years 5 Lakh (s) Waste Containers Or Rigid Liners- Dust Bin Or Garbage Bin Or Household Bin ( 100 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Utility Public (Mobile containers confirming IS: 12402) Domestic, Public (Mobile containers confirming IS: 12402) ISI Marked No yes, No CM/L No (If ISI Marked Yes) (If No write NA) NA - Class confirming to IS:12402 (For Public Dustbins) NA - Material HDPE HDPE, LDPE, LLDPE, Corr osion free sheet metal, Stainless steel, Stainless Steel (with inner Plastic lining/bin) CAPACITY Bin Capacity (Volume) (Ltrs) 100 Litres 100 Litres DIMENSIONS Wheel Dimension in (mm) (Diameter x Thickness ) (mm x mm) NA - Weight of Dustbin (Complete unit) 2000 - 1/3 (Grams) CONSTRUCTIONAL Colour blue - Wheel Lock Without - Load carrying Capacity (Kgs) 120 kg - Wall Non- Perforated - Lid Swing type - Handle With - Wheel Without - Wheel Material NA - Towage Provision no - Gripping Provision Both Frontal &Ventral - Plugged outlet for washing & draining Without - UV Resistant yes - Dust Bin stand with - No. of Compartments in the Bin single - CERTIFICATIONS Availability of Test Reports from Central Government/NABL/IL AC acredited Lab to prove conformity to the specifications yes - Test report number 2538 - Test report date 20.11.2017 - Name and address of lab Central Institute of Plastic Engineering And Technology - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sunil Kumar Sahdev 110009, Rajan Babu Institute of Pulmonary Medicines & Tuberculosis KINGSWAY CAMP 100 15 EMD Required No ePBG Required No 2/3

Modular Table

almirah- Steel Almirah- Steel ( 7 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS:3312 latest false - No of shelves (Nos) 5 - Type of Shelves Fixed - Locker Provided false - Locking System with the locker YES - Cloth hanging provision in the Almirah false - Number of Doors (Nos) 2 - Door Stiffner upto full door height Provided with the almirah doors true - Number of Hinges with each door (Nos) 1 - Number of Glass Sheet fixed in each Almirah door (Nos) 2 - Construction Welded - Lock Three Way bolting device controlled by 6 lever lock - MATERIAL Material M.S sheet conforming M.S sheet conforming 1/4 to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1 to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1, M S Sheet conforming to Quality Grade D of IS:513/2008 with amend. no. 1 (Not as per IS 3312) Material of Almirah Doors 5 mm thick Transparent Glass Sheet fixed in the MS sheet frame 5 mm thick Transparent Glass Sheet fixed in the MS sheet frame Sheet Thickness of Locker 0.9 mm - Length of Glass Sheet ±10 (mm) 950 mm - Width of Glass Sheet ±10 (mm) 460 mm - Sheet Thickness of door in mm 1.0 mm - Sheet Thickness of sides, back, Top and Bottom 0.8 mm (Minimum) - Sheet Thickness of Shelves 0.9 mm - Sheet Thickness of Pedestal in mm 0.8 mm (Minimum) - Material of Lock lock having made of steel with zinc plated finish having brass levers and MAZAK ZAMAK bolts having zinc plated finish along with MAZAK/ZAMAK handle - Material of Keys keys made of MAZAK ZAMAK having nickle plated finish - DIMENSION Height (Without Pedestal) (in mm) (+/- 10 mm) 1800 1000, 1155, 1855, 1800, 2000, 850, 1050, 1325, 1 450 Width in mm (± 7 mm) 910 760, 910, 1023, 700 Depth in mm (±5 mm) 455 430, 455, 480, 486, 270, 3 70, 400 Inside Height of Locker in mm (± 5 mm) N.A - 2/4 Inside Width of Locker i mm (±5 mm) N.A - Inside Depth of Locker in mm (±5 mm) 430 mm - Width of Stiffner in mm (±5 mm) 125 mm - Thickness of MS Sheet of Stiffner (in mm) 0.9 mm - Stiffened Pedestal height in mm (±2 mm) 125 - Pedestal Width in mm (±2 mm) 75 - COLOUR & FINISH Finish powder coated - Colour of Paint dark gray - Packing: Gutta Packing - CERTIFICATION ISI marked false - WARRANTY WARANTEE PERIOD IN NUMBER OF YEARS 1 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Narendra Kumar Rai 313332, Deogarh Road Amet 7 15 Required No ePBG Required No

classroom chairs Classroom Chairs ( 100 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Chair Type One Arm with fixed Writing pad on one side other side open Without Arms, One Arm with fixed Writing pad on one side other side open, Fixed writing pad on one side and Arm on other side, Foldable Writing pad on One side and Arm on other side, Foldabe Writing Pad on One side with other side open Type of Seat and Backrest 20 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, P or F having index 3.2.3 conforming to IS 2046 and minimum 0.5 mm thick balancing laminate on the other side Made of Polythene cane, Made of Wood, MADE OF TEAK WOOD, 12 mm Thick Plywood Only, 20 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, P or F having index 3.2.3 conforming to IS 2046 and minimum 0.5 mm thick balancing laminate on the other side, 18 mm thick prelaminated Particle 1/5 Board, 25 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, Perforated M S Sheet of 1 mm thickness, Perforated M s sheet of 1.2 mm, perforated m s sheet of 1.4 mm, Perforated MS sheet of 1.6 mm, Perforated SS sheet of 1 mm, Perforated SS Sheet of 1.2 mm, Perforated SS sheet of 1.4 mm, Perforated SS Sheet of 1.6 mm, 19mm thick Commercial Block Board BWP grade Conforming to IS 1659, 38mm thick Commercial Block Board BWP grade Conforming to IS 1659, 19mm thick Decorative Block Board BWP grade Conforming to IS 1659, 38mm thick Decorative Block Board BWP grade Conforming to IS 1659, 19mm thick Commercial Block Board MR Grade Conforming to IS 1659, 38mm thick Commercial Block Board MR Grade Conforming to IS 1659, 19mm thick Decorative Block Board MR Grade Conforming to IS 1659, 38mm thick Decorative Block Board MR Grade Conforming to IS 1659 Depth of Seat in mm (+/- 10 mm) 360 - 2/5 Height of Seat in mm (+/- 10 mm) 440 - Width of Seat in mm (+/- 10 mm) 320 - Overall Chair Height in mm (+/- 10 mm) 750 - SEAT DETAILS Thickness of Cushion Used in Seat in mm (+/- 2 mm) 45 - Density of Cushion Used in Seat (Kg/Cubic Metre) 50 - Material of Fabric of Seat Cover leather fabric - BACKREST DETAILS Density of Cusion Used in Backrest (Kg/Cubic Metre) 50 - Thickness of Cushion in Backrest in mm (+/- 2 mm) 45 - Material of Fabric of Backrest Cover leather facbric - Width of Backrest (mm) 45 - Height of Backrest (mm) 40 - SUPPORT/UNDER STRUCTURE Frame Material Mild Steel square Section of size 25x25 mm and wall thickness minimum 1.6 mm Teak wood of minimum 25 mm thickness, teak wood of minimum 35 mm thickness, any other wood of minimum 25 mm thickness, any other wood of minimum 35 mm thickness, SS 202 STRUCTURE, SS 304 STRUCTURE, Mild Steel square Section of size 25x25 mm and wall thickness minimum 1.6 mm, Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum, Mild Steel Square Section of outside side minimum 25 mm and wall thickness minimum 1.2 mm, 19mm thick Commercial Block Board BWP grade Conforming to IS 3/5 1659, 38mm thick Decorative Block Board MR Grade Conforming to IS 1659, 25 thick teak carved wood Under Storage provided below the Seat YES - Material of under storage NA - Length of Under Storage (mm) NA - Width of Under Storage (mm) NA - DEPTH of Under Storage (mm) NA - WRITING PAD DETAILS Writing Pad Material 18 mm teak plywood - Writing Pad Size (Length X Width in mm) 12 17 - MISC Colour of Fabric for Seat and Backrest gray - Finishing of Structure Melamine finish/Polish - WARRANTY Warranty period in number of years 1 1, 2, 3, 4, 5 CERTIFICATION Test reports to be furnished to buyer on demand YES - Product having BIFMA certification NO YES, NO OEM of offered NO YES, NO 4/5 product is ISO 9001:2015 certified OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Arun Kumar 324001, Near anta ghar, Nayapura, Kota 100 15 EMD Required No ePBG Required No

chairs-office

almirah- Steel Experience with Gov. Required 1 Year (s) Almirah- Steel ( 3 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS:3312 latest true - No of shelves (Nos) 5 - Type of Shelves Fixed - Locker Provided true - Locking System with the locker YES - Cloth hanging provision in the Almirah false - Number of Doors (Nos) 2 - Door Stiffner upto full door height Provided with the almirah doors false - Number of Hinges with each door (Nos) 4 - Number of Glass Sheet fixed in each Almirah door (Nos) N.A - Construction Welded - Lock Three Way bolting device controlled by lock - 1/3 MATERIAL Material M.S sheet conforming to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1 M.S sheet conforming to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1, M S Sheet conforming to Quality Grade D of IS:513/2008 with amend. no. 1 (Not as per IS 3312) Material of Almirah Doors M S Sheet M S Sheet, 5 mm thick Transparent Glass Sheet fixed in the MS sheet frame, 3mm thick polycarbonate sheet fixed in the ms sheet frame, perforated MS sheet Sheet Thickness of Locker 0.7 mm - Length of Glass Sheet ±10 (mm) N.A - Width of Glass Sheet ±10 (mm) N.A - Sheet Thickness of door in mm 0.8 mm (Minimum) - Sheet Thickness of sides, back, Top and Bottom 0.8 mm (Minimum) - Sheet Thickness of Shelves 0.6 mm - Sheet Thickness of Pedestal in mm 0.8 mm (Minimum) - Material of Lock Brass and steel finish - Material of Keys brass and steel finish - DIMENSION Height (Without Pedestal) (in mm) (+/- 10 mm) 1855 1000, 1155, 1855, 1800, 2000, 850, 1050, 1325, 1 450 Width in mm (± 7 mm) 760 760, 910, 1023, 700 Depth in mm (±5 mm) 430 430, 455, 480, 486, 270, 3 70, 400 Inside Height of Locker in mm (± 5 mm) 290 mm - Inside Width of Locker i mm (±5 mm) 380 mm - Inside Depth of Locker in mm (±5 mm) 430 mm - 2/3 Width of Stiffner in mm (±5 mm) 115 mm - Thickness of MS Sheet of Stiffner (in mm) 0.7 mm - Stiffened Pedestal height in mm (±2 mm) 120 - Pedestal Width in mm (±2 mm) 70 - COLOUR & FINISH Finish Stove Ennamel Paint - Colour of Paint steel gray - Packing: Corrogeted Paper Packing - CERTIFICATION ISI marked false - WARRANTY WARANTEE PERIOD IN NUMBER OF YEARS 4 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Arun Kumar 324001, Near anta ghar, Nayapura, Kota 3 15 EMD Required No ePBG Required No

Ceiling Fan

lead acid battery Lead Acid Battery ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Types of Lead Acid of Battery Statinary Lead-Acid Batteries (with tubular positive plates) in Monobloc Container conforming to IS:13369/1992 Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments, Statinary Lead-Acid Batteries (with tubular positive plates) in Monobloc Container conforming to IS:13369/1992, Statio nary cells and Batteries, Lead Acid Type (With Tubular Positive Plates) conforming to IS:1651/1991, Stationar y Valve Regulated Lead Acid Batteries conforming to IS:15549 2005, Lead-Acid Storage Batteries for Motor Vehicles with Light weight and High Cranking Performance conforming to IS:14257 1995, Lead-Acid Storage Batteries for 1/3 Motor Vehicles conforming to IS:7372/1995 Nominal Voltage of Battery (volts) 12.0 Volt 2.0 Volt, 6.0 Volt, 12.0 Volt Material of container Fibre Reinforced Plastics (FRP) Hard Rubber, Fibre Reinforced Plastics (FR P), Polypropylene, ABS Rated Capacity at C20 discharge (AH) 150 Warranty (Years) 3 Years 1 Year, 2 Years, 3 Years, 4 Years, 5 Years Battery Condition Charged - CONSTRUCTIONAL Dimensions (L x W x H) (mm x mm x mm) As per relevant IS Specifications - Volume of Electrolyte (ml) 16.4LTS electrolyte volume - Weight of Dry Battery (Kg) shall be as per relevant IS: Specn., corresponding Ah Yes. - No.of cells per Battery (No.) 6 Cells for 12 Volt battery - CERTIFICATIONS Availability of Test Reports from Central Govt./NABL/ILAC accrediated Lab showing conformity to the specifications Yes - Address of the Lab KOLKATA - Name of the Lab EXIDE BATTERY LTD - Test Report No. NA - Test Report Date NA - Compulsory Registration (CRS) of BIS for safety as per IS 16046 as applicable. Secondary Cells and (Batteries containing Alkaline or other non- acid Electrolytes-Safety Requirements for Portable sealed secondary cells, and for Batteries made from them for use in portable applications YES - * Bold specifications are the golden parameters. 2/3 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dr.Hanumant Singh Chouhan 307026, S.M.C.C. COLLEGE ABUROAD, PALANPUR ROAD, KESARGANJ, ABUROAD 2 15 Required No ePBG Required No

Camera for CCTV System Camera For CCTV System ( 8 ) Technical Specifications Specification Specification Name Values Allowed Values CAMERA TYPE Type of Camera Housing BULLET CAMERA DOME CAMERA, BOX CAMERA, BULLET CAMERA IP Camera Yes Yes, No PTZ Camera No Yes, No IMAGE SENSOR Image Sensor Type CMOS CCD, CMOS Image Sensor Size 0.34 1, 0.67, 0.5, 0.34, 0.25, 0. 357, 0.37, 0.4 Camera Image Sensing capacity (Picture Mode) 4MP 1MP, 1.3MP, 2MP, 3MP, 4 MP, 5MP, 6MP, 8MP Resolution D1 (704 x 480 Pixel), HD (1280 x 720 Pixel), Full HD (1920 x 1080 Pixel), 4K HD (3840 X 2160 Pixel) D1 (704 x 480 Pixel), 4K HD (3840 X 2160 Pixel) Day/Night Capable true IR illumination Range(mtr) 30 15, 30, 50, 80, 100, 120, 1 50, NA OPTICS Lens Type Fixed - Focal Length(mm) 3.6 As per GeM Catalogue. Iris Control Yes - Focus Mode Manual - 1/6 VIDEO Frame Rate (fps) 25 25, 60 Video Compression H.264 - Video Streaming Dual compressed stream Dual compressed stream, Triple compressed stream, Quad Compressed Stream PAN/TILT/ZOOM Panning Range NA - Pan Speed (deg/sec) NA 120, 240, 320, NA, 180 Tilt Range below horizontal (deg) NA - Tilt Range above horizontal (deg) NA - Tilt Speed (deg/sec) NA 90, NA Optical Zoom NA 12X, 20X, 30X, 36X, 44X, NA Digital Zoom NA 10X, 12X, 16X, NA AUDIO Audio Support false Audio Compression NA - Audio Streaming NA - Number of Audio Input Channel NA - Number of Audio Output Channel NA - External Microphone Support false - ALARM Alarm Support false Number of Alarm Digital Input NA - Number of Alarm Relay Output NA - Pre/Post Alarm Buffer false - SECURITY Multi Level User ID/Password Yes - IP Address Filtering true - Encrypted Data Transmission HTTPS (SSL/TSL) - PERFORMANCE Minimum Illumination for Capturing Color Image 0.6 0.6, 0.2, 0.1, 0.05, 0.0 1 Electronic Shutter Speed(sec) 1/3 to 1/10000 - WDR (Wide Dynamic 80 dB 80 dB, 100 dB, 120 2/6 Range) dB, DWDR SNR (Signal to Noise Ratio) 40-50 40-50, 50-60, 60-70, 70-8 0 Auto Exposure Auto Level Control, Electronic Level Control - FEATURES White Balance ( Indoor/Out door/Manual Selectable) Yes - Auto Gain Control (On/Off selectable) Yes - Back Light Compensation Yes - Remote Administration (Remote configuration and status using web based tool) Yes - Remote System Update Over Network Yes - PC Client (PC application client with a channel recording feature support) Yes - Web Client (Viewer through HTTP system configuration) Yes - On Screen Display in English Yes - ONVIF Support Yes - Presets 0 - Group Touring 2 - Privacy Zones 4 - NETWORK AND INTERFACE Supported Protocols UDP, SNMP, IGMP, DHCP, RTP, RSTP, HTTP, SMTP, F TP, ICMP, HTTPS, DNS, DD NS, RTSP, RTCP, NTP, UPn P, QoS, TCP/IP, NA - IP Support Static, Dynamic, NA - Signal Processing Digital Signal Process - IPv6 ready No - Wireless false - Simultaneous Connections 5 - STORAGE On Board SD Card Support false - 3/6 SD Card Memory(GB) NA - HOUSING Installation Type Indoor, Outdoor Indoor, Outdoor Material of the Housing construction Alluminium Alluminium, Plastic Protection IP 66 - Vandal Resistant Housing No - If Yes, IK rating NA - Mounting bracket Wall Mounted - Weight 400 - Dimensions (mm x mm x mm) 30x80x30 - POWER SUPPLY Power Input 12 V DC, PoE - Power Consumption 5 - Suitable Adapter Shall be Supplied to Make the Equipment Work on 230 V (+/- 10 %), 50 Hz NA - OPERATING CONDITIONS Operating Temperature Range -20 to +50 deg C - Relative Humidity Non Condensing (%) 95 - WARRANTY/SERVICES Warranty 2 1, 2, 3, 4, 5 Time for Replacement of Defective Product During Warranty Period 72 12, 24, 36, 48, 72 Supply of Compatible drivers and software included Yes - ENVIRONMENTAL CERTIFICATION Availability of facility & infrastructure for verification of all parameters, features, and capability with Seller Yes - Availability of facility to test signal to noise ratio of camera at 0-01 lux Yes - Conformity to Dry Heat test at 55 degree C for 16 hours as per IS :9000 latest Yes - 4/6 Conformity to Damp heat at 40 degree C - 95% RH (cyclic test): two cycles of 16+8 hours as per IS: 9000 latest Yes - Conformity to Cold test at -10/-20 degree C for 4 hours as per IS: 9000 latest, as applicable Yes - BIS Registration for safety general requirements as per IS 13252 (Part 1):latest No - Availability of Type Test Report from Central Govt NABL/ILAC accredited lab to prove conformity to specification false - Test Report Number and Date NA - Name and Address of Test Lab NA - Certification FCC, CE - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dr.Hanumant Singh Chouhan 307026, S.M.C.C. COLLEGE ABUROAD, PALANPUR ROAD, KESARGANJ, ABUROAD 8 15 Required No ePBG Required No

Camera for CCTV System Camera For CCTV System ( 8 ) Technical Specifications Specification Specification Name Values Allowed Values CAMERA TYPE Type of Camera Housing BULLET CAMERA DOME CAMERA, BOX CAMERA, BULLET CAMERA IP Camera Yes Yes, No PTZ Camera No Yes, No IMAGE SENSOR Image Sensor Type CMOS CCD, CMOS Image Sensor Size 1 1, 0.67, 0.5, 0.34, 0.25, 0. 357, 0.37, 0.4 Camera Image Sensing capacity (Picture Mode) 4MP 1MP, 1.3MP, 2MP, 3MP, 4 MP, 5MP, 6MP, 8MP Resolution D1 (704 x 480 Pixel), HD (1280 x 720 Pixel), Full HD (1920 x 1080 Pixel) D1 (704 x 480 Pixel), Full HD (1920 x 1080 Pixel), 4K HD (3840 X 2160 Pixel) Day/Night Capable true IR illumination Range(mtr) 30 15, 30, 50, 80, 100, 120, 1 50, NA OPTICS Lens Type Fixed - Focal Length(mm) 2.8 As per GeM Catalogue. Iris Control Yes - Focus Mode Auto, Zooming, One - 1/6 Push, Manual VIDEO Frame Rate (fps) 25, 30 25, 60 Video Compression H.264 - Video Streaming Dual compressed stream Dual compressed stream, Triple compressed stream, Quad Compressed Stream PAN/TILT/ZOOM Panning Range NA - Pan Speed (deg/sec) NA 120, 240, 320, NA, 180 Tilt Range below horizontal (deg) NA - Tilt Range above horizontal (deg) NA - Tilt Speed (deg/sec) NA 90, NA Optical Zoom NA 12X, 20X, 30X, 36X, 44X, NA Digital Zoom NA 10X, 12X, 16X, NA AUDIO Audio Support false Audio Compression G.722.1, G.711 - Audio Streaming Two-Way - Number of Audio Input Channel NA - Number of Audio Output Channel NA - External Microphone Support true - ALARM Alarm Support false Number of Alarm Digital Input NA - Number of Alarm Relay Output NA - Pre/Post Alarm Buffer false - SECURITY Multi Level User ID/Password Yes - IP Address Filtering true - Encrypted Data Transmission HTTPS (SSL/TSL) - PERFORMANCE Minimum Illumination for Capturing Color Image 0.1 0.6, 0.2, 0.1, 0.05, 0.0 1 Electronic Shutter Speed(sec) 1/50 to 1/10000 - 2/6 WDR (Wide Dynamic Range) DWDR 80 dB, 100 dB, 120 dB, DWDR SNR (Signal to Noise Ratio) 40-50 40-50, 50-60, 60-70, 70-8 0 Auto Exposure Auto Level Control, Electronic Level Control - FEATURES White Balance ( Indoor/Out door/Manual Selectable) Yes - Auto Gain Control (On/Off selectable) Yes - Back Light Compensation Yes - Remote Administration (Remote configuration and status using web based tool) Yes - Remote System Update Over Network Yes - PC Client (PC application client with a channel recording feature support) Yes - Web Client (Viewer through HTTP system configuration) Yes - On Screen Display in English Yes - ONVIF Support Yes - Presets 60 - Group Touring 10 - Privacy Zones 4 - NETWORK AND INTERFACE Supported Protocols UDP, SNMP, IGMP, DHCP, RTP, RSTP, HTTP, SMTP, F TP, ICMP, HTTPS, DNS, DD NS, RTSP, RTCP, NTP, UPn P, QoS, TCP/IP - IP Support Static, Dynamic - Signal Processing Digital Signal Process - IPv6 ready Yes - Wireless false - Simultaneous Connections 20 - STORAGE On Board SD Card Support false - 3/6 SD Card Memory(GB) NA - HOUSING Installation Type Indoor, Outdoor Indoor, Outdoor Material of the Housing construction Alluminium Alluminium, Plastic Protection IP67 - Vandal Resistant Housing Yes - If Yes, IK rating IK 10 - Mounting bracket Wall Mounted - Weight 380 - Dimensions (mm x mm x mm) 70X164.7 - POWER SUPPLY Power Input 12 V DC, PoE - Power Consumption 4.3 - Suitable Adapter Shall be Supplied to Make the Equipment Work on 230 V (+/- 10 %), 50 Hz Yes - OPERATING CONDITIONS Operating Temperature Range -20 to +50 deg C - Relative Humidity Non Condensing (%) 95 - WARRANTY/SERVICES Warranty 1 1, 2, 3, 4, 5 Time for Replacement of Defective Product During Warranty Period 36 12, 24, 36, 48, 72 Supply of Compatible drivers and software included Yes - ENVIRONMENTAL CERTIFICATION Availability of facility & infrastructure for verification of all parameters, features, and capability with Seller Yes - Availability of facility to test signal to noise ratio of camera at 0-01 lux Yes - Conformity to Dry Heat test at 55 degree C for 16 hours as per IS :9000 latest Yes - 4/6 Conformity to Damp heat at 40 degree C - 95% RH (cyclic test): two cycles of 16+8 hours as per IS: 9000 latest Yes - Conformity to Cold test at -10/-20 degree C for 4 hours as per IS: 9000 latest, as applicable Yes - BIS Registration for safety general requirements as per IS 13252 (Part 1):latest Yes - Availability of Type Test Report from Central Govt NABL/ILAC accredited lab to prove conformity to specification true - Test Report Number and Date CE (EN 60950:2000) UL:UL60950-1 - Name and Address of Test Lab DAHUA TECHNOLOGIES, No.1199, Bin'an Road, Binjiang District, Hangzhou, China - Certification FCC, CE, UL - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dr.Hanumant Singh Chouhan 307026, S.M.C.C. COLLEGE ABUROAD, PALANPUR ROAD, KESARGANJ, ABUROAD 8 15 Required No ePBG Required No

Surveillance Hard disk Surveillance Hard Disk ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Specifications Type Internal - Form Factor 3.5 - Capacity (TB) 8 Cameras supported 64 - Number of USB 2 Ports 0 - Interface SATA 6 Gb/s - Workload Rating (TB/year) 180 180, 550 OS Supported Windows - NVR-Ready Yes - Bay Count Support 0 - Cache (MB) 256 - Water Resistant Yes - Shock Resistant Yes - Dimension (W x H x D) (mm x mm x mm) 101.6x26.1x147 - Weight (Grams) 715 - Wattage (Watts) 9 - Standard Accessories to be supplied - - 1/3 Operating Temperature Range (Degree C) -40 to 70 - Operating Humidity (% RH) 30 - Availability of Test Reports from Central Govt/NABL approved ILAC acredited lab to prove conformity to the specification (Test reports are to be furnished when demanded by buyer) No - If yes, Test Report Number and Date - - If yes, Name of the Lab - - If yes, Address of the Lab - - Warranty (Years) 3 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dr.Hanumant Singh Chouhan 307026, S.M.C.C. COLLEGE ABUROAD, PALANPUR ROAD, KESARGANJ, ABUROAD 1 15 Required No ePBG Required No