Buyer Organistion Tender Results

e rickshaw for carrying goods Average Turn Over of Last 3 Years 10 Lakh (s) E Rickshaw For Carrying Goods ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of E Cart Fully Electric, Battery Operated Motor Driven for Carrying Goods Fully Electric, Battery Operated Motor Driven for Carrying Goods Model Number of E- Cart - - Colour of E cart - - The E Cart Must Fabricated From Good Quality Steel properly Painted to avoid Rusting for more than 5 Years, - Name and Grade of Steel from which E Cart Body Framed - - Kerb Weight of E- Cart (kg) 300 Goods Carrying Capacity (kg) 500 Run Distance ( for a Full Charge of Battery, to be tested with full load at maximum AIS-040 100 1/5 )) (km) Type of Chassis for E cart - - Ground Clearance as per IS : 9435 200 Wheel Base (mm) 2080 Turning Radius (mm) 2500 Power Transmission from Motor Shaft to Wheels Direct Mounting Direct Mounting, Chain, Sprocket Type, Other Mechanical Mechanisms Please Specify the Mechanical Mechanism otherwise Put NA - - Type of Battery as per AIS-048 Lead Acid, EV Grade, Tubular Deep Discharge Lead Acid, Tubular Deep Discharge Capacity of the Battery approved by ICAT/ARAI (Ah) 110 Battery Voltage, Nominal 48V 48V, 60 V Maximum Overall Dimensions of the Battery ( L x Wx H )(mm3) - - Nominal Filled Weight of the Battery (kg) 35.06 Motor Controller ( Must Suitable for starting, accelerating, decelerating, driving, and stopping of E Cart - - Battery Charger 220/230 V Nominal Input Voltage, High Efficiency Type 220/230 V Nominal Input Voltage, High Efficiency Type Charging Current (A) 10 Type of Motor Brushless DC Motor Brushless DC Motor Motor Output Power, 48V/60V at Full Load (watt) 1500 Overall Efficiency of the E Cart ( to be tested at Full Load with maximum speed as per Concerned AIS 90 2/5 standards. (%) Gradeability of E- cart to be tested at full procedure as per AIS -003 Load (Degree) 30 Thickness of Material of Sheet used for Roof of E- Cart (mm) 1 Material of the roof of E-Cart, if Enclosed Otherwise Put NA Combination of Fibre Glass with good Quality Metal Aluminium, MS, Fibre Glass of Good Quality, Combination of Fibre Glass with good Quality Metal, others Certification Parameters Vehicle Certification others VRDE, ARAI, ICAT, others Vehicle Certification Number and Date - - If Vehicle Certification from Others Agency, Name of the Agency otherwise put NA - - Constructional Parameters Seating Facility Front For Driver only For Driver only Length of E -cart as per Gazette Notification by Ministry of Road and Transport Oct, 2014 (metres) 2.6 Width of E -Cart as per Gazette Notification by Ministry of Road and Transport Oct, 2014 (meters) 0.98 Height of E -Cart as per Gazette Notification by Ministry of Road and Transport Oct, 2014 (meters) 1.6 Dimensions of the cabin Provided for Transport of Goods (mm x mm x mm) (mm3) - - Size of Front Tyre (mm) - - Size of Rear Tyre (mm) - - Brake Type (Front ) - - 3/5 Brake Type ( Rear ) - - Suspension System ( Rear ) - - Suspension System (Front) - - Reverse Gear Facility Yes Yes The Mounting of Batteries Yes Yes Vehicle lighting System Filament Type Filament Type, LED Based, LCD Based Instrument Panel Containing Speedometer and Battery Charging Indicator Yes Yes Glass Windshield with wiper motor as approved by ICAT/ARAI true Battery Make as per AIS :048:2009 others Okaya, Exide, Ceil, Amar on, others If others please specify the material Otherwise put NA - - Equipped with Start and Stop Button, parking Lights, Back lights with Reverse Gear Facility Yes Yes Equipped with Fire Extinguisher true Equipped with First Aid Box true Yellow Color reflective tape on Front and Rear Side of the E Cart Yes Yes E Cart Integration, Yes Yes Type of Cabin used for Transportation of Goods Open Open If others please specify the Name of Brand, Otherwise put NA( as per AIS :048:2009) - - Performance Parameters Speed of the E-Cart as per CMVR -2014 25 4/5 with latest amndmt (to be tested with Full Load ) (kmph) Battery Warranty in years (Years) 1 1, 2, 3 No. Of Free Service 1 - Complaince of Centre of Gravity of E Cart as a Compulsory Norms for Safety Yes Yes Confirming to Applicable Environmental Test Yes Yes Noise level must be Low during Operation Yes Yes * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sunil Kumar Sahdev 110009, Rajan Babu Institute of Pulmonary Medicines & Tuberculosis KINGSWAY CAMP 5 15

Printer

Printer

hopper or tipper Average Turn Over of Last 3 Years 50 Lakh (s) Experience with Gov. Required 2 Year (s) Hopper Or Tipper ( 8 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Box body Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, Box body Tipper - Main Engine Capacity (cc) 1396 Make of Chassis Tata Motors Type of Chassis Frame Ladder type cranked frame with inverted hat section long members & welded cross members Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - 1/6 Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 17.88 Speed, Max (Km/Hr) 80 - Main Engine Power BHP@rpm (BHP@rpm) 71 BHP @ 4000RPM - Engine Torque Max, @ rpm (N- M@rpm) 140 Nm @ 1800-3000 RPM Main Engine Aspiration Turbocharged Intercooled Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 4 Fuel Tank Capacity (Ltrs) 38 Gradeability of Vehicle with load( %) 24.93 - Gradeability of Vehicle without load ( %) 25.2 - Ground Clearance (mm) 160 Wheel Base (mm) 2380 - Kerb Weight (Kg) 1100 Gross Vehicle Weight (Kg) 2255 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) 4x2 - Type of Front Axle and Suspension System Independent, strut type - Type of Rear Axle and Suspension System Semi-elliptic leaf spring - Type of BIS MARKED Vehicle Tyre Radial - Chassis Manual Automatic, Manual 2/6 Transmission System Number of Speed Forward Gears 5 - Type of Steering Power Operated Manual, Power Operated Turning Radius, Min (mm) 5100 Speed Governers yes - ABS Fitted No - Front Vehicle Brake Disc Brake - Dual Circuit Vacuum Assisted Hydraulically Actuated - Rear Vehicle Brake Drum Brake - Dual Circuit Vacuum Assisted Hydraulically Actuated, LSPV Fitted on Rear Brakes. Type of Clutch 200 mm, Single Plate Dry Friction Type - Tipping Angle (Degree) 48 Tipper Container cap acity/Volume(cubic metres) 3.2 Certification Chassis Certification ARAI/VRDE/ICAT No. ARAI Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 15 - No. Of Free Service (Nos) 3 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 4340 - Width of Chassis (mm) 1594 - Height of Chassis (mm) 1858 - Size Of Front Tyres (mm) 165 R14 LT 8PR - Size Of Rear Tyres (mm) 165 R14 LT 8PR - 3/6 Size of Wheel (mm) 14 Tipper body Pivot length (mm) 1546 - Tipper body Length (mm) 2695 - Tipper Body Height (mm) 1082 - Overall Height of Tipper from Ground (mm) 1801 - Body Plate Thickness (mm) 2 Main Frame Thickness (mm) 4 Pneumatic System false - Hydarulic System true - Tipping Hydraulic Cylinders(Make) Wipro or Equivalent Make - Hydraulic System Driven by Main Engine - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - If Yes Auxiliary Diesel Power (HP@rpm) No Auxiliary Diesel Engine Transmission 0.0 Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Dumping Height (mm) 551 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - 4/6 Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramchandra Dhundiraj Gokhale 402107, Sharad Pawar Bhawan, Pen Municipal Council, Dist-Raigad 8 15 EMD Advisory Bank IDBI Bank EMD Percentage(%) 1.00 EMD Amount 50338 ePBG Advisory Bank State Bank of India ePBG Percentage(%) 9.00 Duration of ePBG required (Months). 9

web application firewall Average Turn Over of Last 3 Years 500 Lakh (s) Experience with Gov. Required 5 Year (s) Web Application Firewall ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Deployment modes Layer 2 Bridge mode, Transparent IP mode, Tap mode, Wire mode, Web Application Security SQL Injection attack, Scada Attacks, IoT Attacks, Exploit Kits, Web Attacks, Dos Attacks, Geo IP attacks, Buffer overflow, IP Black listing/whitelisting, P2P Attacks, Concurrent Connection (Maximum) (Numbers) 5000000 HTTP Connections/Sec (Maximum) (Numbers) 150000 System Throughput (Maximum) (Gbps) 15 Request Latency Sub-ms - 1/4 Network Interface Ports 20 - Bypass ports for fail safe Yes - Attack Protection Dos Protection, SQL Injection, P2P attack, Layer 7 appliaction layer attack, DPI SSL inspection - Detect and prevent attackers from finding hidden directories Features Available - Processor Cavium Octeon Processor with 24 cores - Storage (GB) 250 - Authentication and Authorization XAUTH/RADIUS, Active Director y, SSO, LDAP, Novell, inter nal user database, Ter minal Services 5, Citrix 5 - Integrated scanner Yes - Logging, Reporting and Monitoring syslog log, reporting, firewall log, real time traffic visualisation, application visibility, email loggin and reporting, cpu usage, packet flow monitoring, audi log, snmp, access log, disk usgae, http concurrent connections etc. - Input-Output Port USB, Ethernet - Power Supply Dual - Power Consumption (Watt) 200 - Operating Temperature Range (Degree C) 100-240 VAC - Storage Temperature Range (Degree C) 100-240 - Operating Humidity (%RH) 0.9 - Compliance Certificates FCC Class A, CE (EMC, LVD, RoHS), C-Tick, VCCI Class A, MSIP/KCC Class A, UL, cUL, TUV/GS, CB, Mexico CoC by UL, WEEE, REACH, ANATEL, BSMI, 2/4 CU Dimensions (H x W x D) (cm x cm x cm) 17x19.1x1.75 in (43.3x48.5x4.5 cm) - Weight (Kg) 8 - Availability of test reports from Central Govt/NABL/ILAC accredited Lab covering all the parameters Available - If yes, Name of the Lab - - If yes, Address of the Lab - - If yes, Test Report Number and Date - - If yes, Test Report to be furnished to the buyer on demand Yes - On SIte OEM Warranty (Year) 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Tarun Soni 382030, CENTRAL UNIVERSITY OF GUJARAT, SECTOR-29, GANDHINAGAR, 382030 GUJARAT. 1 15 EMD Required No ePBG Required No

Desktops

OEM Cartridge/Consumable Average Turn Over of Last 3 Years 200 Lakh (s) Experience with Gov. Required 5 Year (s) OEM Cartridge/Consumable ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM OEM Brand Lexmark As per GeM Catalogue. Type of Cartridge/Co nsumable Toner Ink, Toner, Drum Colour of Cartridges Consumables Black Black, Cyam, Magenta, Y ellow, Ti-Color Ink/Toner/Drum Model number 603 Black Return Toner Cartridge As per GeM Catalogue. Corresponding Part number/code 60F3000 As per GeM Catalogue. Printer Model number/numbers for which Cartridge is suitable MX310DN, MX410DE, M X 610DE As per GeM Catalogue. Yield of the Cartridge as per ISO IEC:19752/2004(E)fo r BK & ISO/IEC:19798 2007(E) for colour (Numbers) 2500 As per GeM Catalogue. * Bold specifications are the golden parameters. 1/2 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Parveen Kumar Chawla 110002, Wing-II, Hans Bhawan, 1, Bahadur Shah Zafar Marg, New Delhi 5 15 Required No ePBG Required No

Desktops

Online UPS Online UPS ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Rating in KVA (KVA) 5.0 KVA As per GeM Catalogue. Technology IGBT-PWM with inbuilt isolation transformer MOSFET-PWM with inbuilt isolation transformer, IGBT-PWM with inbuilt isolation transformer, IGBT-PWM without inbuilt isolation transformer Input Power single phase 160V - 260V sinewave, 50Hz single phase 160V - 260V sinewave, 50Hz Output power Single phase 230V +/-1% sinewave 50 Hz Single phase 230V +/-1% sinewave 50 Hz, 3 Phase 400V +/-1% with alternative user setable setting of 380V +/-1% 50 Hz Backup time (Minutes) 120 120 Minimum VAH (VAH) 16000 Warranty for UPS (Years) 3 1, 2, 3, 4, 5 Movable trolly for Batteries With With, Without, Without trollery but with rack Warranty for battery 2 1, 2 1/4 Degree of Protection IP21 IP21, IP20 Cabling 5 meters for input and out put With With, Without Paralleling kit for synchronising With With, Without Installation and Commissioning Yes - CONSTRUCTIONAL Minimum thickness of M.S.Sheet Enclosure duly painted (mm) 1.2 - Type of Battery SMF-VRLA conforming to JISC:8702(Pt.I, II&III) - FUNCTIONAL Maximum overshoot and Under shoot of output rated voltage 4 - Voltage Regulation from no load to full load (%) </= 3% - 20% Overload limit for minimum 10 minutes Yes - Overall Efficiency (%) >/=90% - Total Harmonic Distortion(THD) (%) Maximum 3% - 50% Overload limit for minimum 1 minutes Yes - PROTECTION Protection for under voltage at battery terminal at 10.5V per 12 V battery. Yes - Protection of Over voltage, Short Circuit & over load at UPS output terminal Yes - METERING AND INDICATIONS Digital Metering in UPS for AC Input Voltage, Output AC Volt age, Current, Frequency, Battery Voltage and Current Yes - Indicators for mains presence, Battery charging and discharging, Output Over Load, Low Battery Voltage Yes - REPORTS AND CERTIFICATION Damp Heat : in accordance with IS:9000(part 5/sec.2)1981 at Yes - 2/4 Temperature of 40 degree C, two cycles of (12+12) hours each 2007) Dry Heat Test : in accordance with IS:9000 (part 3/sec.5)1977 (reaffirmed 2007) at 55 degree C for 16 hrs Yes - Cold Test : in accordance with IS:9000 (Part 2/Sec.4)1977 (Reaffirmed 2007) at -10 degree C for 4 hrs. Yes - Availability of the Type Test Report from Central Govt. NABL/ILAC Accredited lab covering all technical requirements. Yes - Type Test Certificate No. 38935-D - Type Test Certificate date 27.02.2014 - Name of Lab NTH - Address of Lab Ghaziabad, Uttar Pradesh - As per Meity (Government of India) guidelines UPS shall have valid BIS CRS certifications as applicable Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rohit Kumar 211001, OLD RED BUILDING 38 M.G..MARG, CIVIL LINES ALLAHABAD 1 15

Fogging Machine

Line Intractive UPS with AVR Average Turn Over of Last 3 Years 50 Lakh (s) Experience with Gov. Required 5 Year (s) Line Intractive UPS With AVR ( 384 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Rating in KVA/min VAH capacity of battery (KVA/VAH) 1.0/168 1.0/168 Technology IGBT-PWM IGBT-PWM Type of battery SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 Rated Output (Volt) Single phase sinewave 230v AC, 50Hz Single phase sinewave 230v AC, 50Hz Degree of protection IP 20 IP 20 Inverter Efficiency (%) >/= 70% >/= 70% Warranty for the battery from the date of delivery 1 year - Warranty for Line Interactive UPS 2 Years 2 Years Installation and commissioning instructions Yes - CONSTRUCTIONAL Type of enclosure ABS - AC out put for Yes Yes 1/4 printer (not through inverter) Inverter out put socket AC out put for printer (not through inverter) 3 Three pin 3 Three pin FUNCTIONAL Total harmonic distorsion (%) </= 40% - Input (Volt) Single phase sinewave(160-280v) - Switching over time (Mili sec) Maximum 10 milli seconds - Overload Time (Minutes) >/= 10 minutes - Load power factor >/= 0.6 - Variation in AVR output in AC mode (%) AVR (Voltage regulation) output voltage in AC Mode 230 Volts +/-9%, 50 +/-3 Hz - Overload (%) >/=10% - Variation in output voltage in battery mode (%) (UPS output voltage in battery mode) 230 Volts +/- 10% - Variation on output frequency in battery mode (Hz) </=0.5 - PROTECTION Protection against (over discharge) discharge per 12v battery (Volt) 10.5 - Protection for outside input voltage range: If Input voltage goes outside the range 160 to 280 Volts, the system shall switch over to battery mode Yes - Protection against short circuit of UPS Yes - Protection for over voltage and over load Yes - REPORTS AND CERTIFICATIONS Damp heat Test at 45 degree, RH -95% for 2-cycle as per IS:9000 pt-5/sec-1 Yes - Dry heat Test at 45 Yes - 2/4 degree for 16 Hrs as per IS:9000 pt-3/sec-5 Cold Test as per IS:9000 pt-2/sec-4 Yes - Availability of the type test report from central Govt./NABL/ILAC Accredited Lab Yes - Type Test certificate no. and date As Per Oem - Name Of Lab As Per Oem - Address of Lab As Per Oem - As per Meity (Government of India) guidelines UPS shall have valid BIS CRS certifications as applicable Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Satyendra Singh 781037, Office of the Principal chief conservator of forest, Aranya Bhawan, Panjabari, Guwahati 384 40

DEVELOPMENT TOOLS FOR WEB APPLICATION/PORTAL APPLICATION SOFTWARE DEVELOPMENT TOOLS FOR WEB APPLICATION/PORTAL APPLICATION SOFTWARE ( 8 ) Technical Specifications Specification Specification Name Values Allowed Values BASIC INFORMATION OF DEVELOPMENT TOOLS FOR WEB APPLICATION/PORTAL APPLICATION SOFTWARE Name Of Software IBM Security AppScan Standard Floating User Single Install Annual SW Subscription and Support Renewal 12 Months ( NICSI-# 256) - Type of Software Machine based User based, CPU based, Machine based Type of Licence Perpetual Perpetual, Subscripton Name Of The OEM IBM - OEM Model/Part No E046DLL - Software Version/Name Version_ 9.0.x - Date Of Launch Of Version 2016 - FEATURES AND FUNCTIONALITY PARAMETERS (GOLDEN) Crash Analysis false Validation Codes To Ensure High Quality Data false Installation And Demonstration false Free Upgradation To Higher Version YES YES 1/7 within support period Numbers of years upto which support is available from OEM 1 1, 2, 3, 5 FEATURES AND FUNCTIONALITY PARAMETERS (GENERIC) Code Assistance true - Collaboration true - Debugging false - Graphical User Interface true - Mobile Application Development false - Software Development Tools false - Testing Management false - Version Control false - Web Application Development false - Portal Application Development false - Build Customized Form Based Applications false - Triggers Based On User Inputs And Form Actions false - Data Import/Export Feature false - Data Visualization Feature false - Data Management Feature false - Drag & Drop Interface Feature false - Mobile Reporting false - Multi-Device Testing false - Custom Interactive Design Capability false - HTML5 Support true - XML Support true - Java Platform true - Instant On-Device Design Review false - Remote Design Review false - 2/7 Creating Content false - Offline Support Aceess Capability false - Built-In Interactive Content false - Multiple Navigation Capability false - Overlays And Popups false - Built-In Interactive Content Layers false - Video And Audio Support false - Linking Internally And To The Web false - Slideshows false - Effects and animations false - Zooming false - Planning false - Multiple Orientation Support false - Easy Design For Multiple Devices false - Automated Production Tools false - Built-In App Library false - If Yes, List Of Apps false - Performance Monitoring Management false - Permission Management Feature false - Push Notifications Feature true - App Wrapping For Security false - Data Encryption false - Reporting And Statistics true - Mobile User Interface false - Plug-Ins For UI Design Tools false - Software Development Kits (SDKs) false - 3/7 If Yes, Specify The Details Of SDKs false - Cross-Platform Support true - Role-Based Permissions Feature true - Search Functionality Feature true - Secure Data Storage Feature false - Signature Capture Feature false - Single Sign On Feature false - Social Media Integration Feature false - Third Party Integration Feature true - Visual Analytics Feature false - Website Integration Feature false - Wireless Network Support Feature false - Build Custom Applications On The Cloud false - Business Automation false - Ease of maintainability and version management false - Bundling and Minification Feature false - Data-Binding false - Templates false - Model-View-Controller pattern false - Dependency Injection false - Stylesheets false - Standards and maintenance false - Application Security true - Quality Assurance and Bug Testing false - Fast development tools false - Integration false - 4/7 Cloud Hosting false - Cross Platform true - No sql database support false - Widgets IBM® Security AppScan® Source delivers maximum value to every user in your organization who plays a role in software security. Whether a security analyst, quality assurance professional, developer, or executive, the AppScan Source products deliver the functionality, flexibility, and power you need - right to your desktop - Deployment Options On-Premise - SUPPORTED HARDWARE REQUIREMENT PARAMETERS Minimum Hard Disk Space Required 2-5 GB - Minimum RAM Size requirment 16 GB - Server requirements Windows or Linux - CPU required dual core - Operating Systems Supported (Driver) Windows or Linux - Supported Devices all - Supported Servers all - Supported Web Browsers all - Supported Database In-built database - Supported Protocols all - Min Processor Bench Mark Score Required n/a - GENERIC PARAMETERS OF APPLICATION SERVER MONITORING SOFTWARE Maximum user handling capability As per License procured - Concurrent user handling capability and per User concurrency & license procuired - Valid Licence copy to be provided YES - Software supplied through URL Link - 5/7 Certifications Benchmarking of Software Products Gartner - No Of Days Training Provided At Site(DAYS) Zero - List Of Items Included In The Package 1 - Hyper link to Data sheet https:/www.ibm.com/in -en/marketplace/ibm- appscan-source - No of Softwares sold 100 - Number of User Referance from Government Departments where Software installed 1 - Details of Government Department email phone no Of concerned authority where Software installed for above NIC - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Chandra Dhameja N 110003, A BLOCK CGO COMPLEX NATIONAL INFORMATICS CENTRE NEW DELHI 8 15 EMD Required No ePBG Required No

DEVELOPMENT TOOLS FOR WEB APPLICATION/PORTAL APPLICATION SOFTWARE DEVELOPMENT TOOLS FOR WEB APPLICATION/PORTAL APPLICATION SOFTWARE ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values BASIC INFORMATION OF DEVELOPMENT TOOLS FOR WEB APPLICATION/PORTAL APPLICATION SOFTWARE Name Of Software IBM Security AppScan Source for Analysis Floating User Single Install Annual SW Subscription and Support Renewal 12 Months ( NICSI S.no-257) - Type of Software Machine based User based, CPU based, Machine based Type of Licence Perpetual Perpetual, Subscripton Name Of The OEM IBM - OEM Model/Part No E08KGLL - Software Version/Name Version_ 9.0.x - Date Of Launch Of Version 2016 - FEATURES AND FUNCTIONALITY PARAMETERS (GOLDEN) Crash Analysis false Validation Codes To Ensure High Quality Data false Installation And Demonstration false 1/7 Free Upgradation To Higher Version within support period YES YES Numbers of years upto which support is available from OEM 1 1, 2, 3, 5 FEATURES AND FUNCTIONALITY PARAMETERS (GENERIC) Code Assistance true - Collaboration true - Debugging false - Graphical User Interface true - Mobile Application Development false - Software Development Tools false - Testing Management true - Version Control false - Web Application Development false - Portal Application Development false - Build Customized Form Based Applications false - Triggers Based On User Inputs And Form Actions false - Data Import/Export Feature false - Data Visualization Feature false - Data Management Feature false - Drag & Drop Interface Feature false - Mobile Reporting false - Multi-Device Testing false - Custom Interactive Design Capability false - HTML5 Support true - XML Support true - Java Platform true - Instant On-Device false - 2/7 Design Review Remote Design Review false - Creating Content false - Offline Support Aceess Capability false - Built-In Interactive Content false - Multiple Navigation Capability false - Overlays And Popups false - Built-In Interactive Content Layers false - Video And Audio Support false - Linking Internally And To The Web false - Slideshows false - Effects and animations false - Zooming false - Planning false - Multiple Orientation Support false - Easy Design For Multiple Devices false - Automated Production Tools false - Built-In App Library false - If Yes, List Of Apps false - Performance Monitoring Management false - Permission Management Feature false - Push Notifications Feature true - App Wrapping For Security false - Data Encryption false - Reporting And Statistics true - Mobile User Interface false - Plug-Ins For UI Design Tools false - 3/7 Software Development Kits (SDKs) false - If Yes, Specify The Details Of SDKs true - Cross-Platform Support false - Role-Based Permissions Feature true - Search Functionality Feature true - Secure Data Storage Feature false - Signature Capture Feature false - Single Sign On Feature false - Social Media Integration Feature false - Third Party Integration Feature false - Visual Analytics Feature false - Website Integration Feature false - Wireless Network Support Feature false - Build Custom Applications On The Cloud false - Business Automation false - Ease of maintainability and version management true - Bundling and Minification Feature false - Data-Binding false - Templates false - Model-View-Controller pattern false - Dependency Injection false - Stylesheets false - Standards and maintenance false - Application Security true - Quality Assurance and Bug Testing false - 4/7 Fast development tools false - Integration false - Cloud Hosting false - Cross Platform false - No sql database support false - Widgets IBM® Security AppScan® Source delivers maximum value to every user in your organization who plays a role in software security. Whether a security analyst, quality assurance professional, developer, or executive, the AppScan Source products deliver the functionality, flexibility, and power you need - right to your desktop - Deployment Options On-Premise - SUPPORTED HARDWARE REQUIREMENT PARAMETERS Minimum Hard Disk Space Required 2-5 GB - Minimum RAM Size requirment 16 GB - Server requirements Windows and Linux - CPU required dual core - Operating Systems Supported (Driver) windows and linux - Supported Devices all - Supported Servers all - Supported Web Browsers all - Supported Database in-built database - Supported Protocols all - Min Processor Bench Mark Score Required N/A - GENERIC PARAMETERS OF APPLICATION SERVER MONITORING SOFTWARE Maximum user handling capability As per License Procured - Concurrent user handling capability As per License Procured and User Concurrency - Valid Licence copy to YES - 5/7 be provided Software supplied through URL Link - Certifications Benchmarking of Software Products Gartnet - No Of Days Training Provided At Site(DAYS) Zero - List Of Items Included In The Package 1 - Hyper link to Data sheet https:/www.ibm.com/in -en/marketplace/ibm- appscan-source - No of Softwares sold 100 - Number of User Referance from Government Departments where Software installed 1 - Details of Government Department email phone no Of concerned authority where Software installed for above NIC - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Chandra Dhameja N 110003, A BLOCK CGO COMPLEX NATIONAL INFORMATICS CENTRE NEW DELHI 1 15 EMD Required No ePBG Required No

DEVELOPMENT TOOLS FOR WEB APPLICATION/PORTAL APPLICATION SOFTWARE DEVELOPMENT TOOLS FOR WEB APPLICATION/PORTAL APPLICATION SOFTWARE ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values BASIC INFORMATION OF DEVELOPMENT TOOLS FOR WEB APPLICATION/PORTAL APPLICATION SOFTWARE Name Of Software IBM Security AppScan Enterprise Server Basic Install Annual SW Subscription & Support Renewal 12 Months ( Nicsi S.No-253) - Type of Software Machine based User based, CPU based, Machine based Type of Licence Perpetual Perpetual, Subscripton Name Of The OEM IBM - OEM Model/Part No E0CRBLL - Software Version/Name Version_ 9.0.x - Date Of Launch Of Version 2016 - FEATURES AND FUNCTIONALITY PARAMETERS (GOLDEN) Crash Analysis false Validation Codes To Ensure High Quality Data false Installation And Demonstration false Free Upgradation To Higher Version YES YES 1/7 within support period Numbers of years upto which support is available from OEM 1 1, 2, 3, 5 FEATURES AND FUNCTIONALITY PARAMETERS (GENERIC) Code Assistance true - Collaboration true - Debugging false - Graphical User Interface true - Mobile Application Development false - Software Development Tools false - Testing Management true - Version Control false - Web Application Development false - Portal Application Development false - Build Customized Form Based Applications false - Triggers Based On User Inputs And Form Actions false - Data Import/Export Feature false - Data Visualization Feature false - Data Management Feature false - Drag & Drop Interface Feature false - Mobile Reporting false - Multi-Device Testing false - Custom Interactive Design Capability false - HTML5 Support true - XML Support true - Java Platform true - Instant On-Device Design Review false - Remote Design Review false - 2/7 Creating Content false - Offline Support Aceess Capability false - Built-In Interactive Content false - Multiple Navigation Capability false - Overlays And Popups false - Built-In Interactive Content Layers false - Video And Audio Support false - Linking Internally And To The Web false - Slideshows false - Effects and animations false - Zooming false - Planning false - Multiple Orientation Support false - Easy Design For Multiple Devices false - Automated Production Tools false - Built-In App Library false - If Yes, List Of Apps false - Performance Monitoring Management false - Permission Management Feature false - Push Notifications Feature true - App Wrapping For Security false - Data Encryption false - Reporting And Statistics true - Mobile User Interface false - Plug-Ins For UI Design Tools false - Software Development Kits (SDKs) false - 3/7 If Yes, Specify The Details Of SDKs false - Cross-Platform Support true - Role-Based Permissions Feature true - Search Functionality Feature true - Secure Data Storage Feature false - Signature Capture Feature false - Single Sign On Feature false - Third Party Integration Feature true - Visual Analytics Feature false - Website Integration Feature false - Wireless Network Support Feature false - Build Custom Applications On The Cloud false - Business Automation false - Ease of maintainability and version management true - Bundling and Minification Feature false - Data-Binding false - Templates false - Model-View-Controller pattern false - Dependency Injection false - Stylesheets false - Standards and maintenance false - Application Security true - Quality Assurance and Bug Testing false - Fast development tools false - Integration false - Cloud Hosting false - 4/7 Cross Platform true - No sql database support false - Widgets IBM® Security AppScan® Source delivers maximum value to every user in your organization who plays a role in software security. Whether a security analyst, quality assurance professional, developer, or executive, the AppScan Source products deliver the functionality, flexibility, and power you need - right to your desktop - Deployment Options On-Premises - SUPPORTED HARDWARE REQUIREMENT PARAMETERS Minimum Hard Disk Space Required 2-5 gb - Minimum RAM Size requirment 16 GB - Server requirements windows & Linux - CPU required dual core - Operating Systems Supported (Driver) Windows & Linux - Supported Devices all - Supported Servers all - Supported Web Browsers all - Supported Database In-built database - Supported Protocols all - Min Processor Bench Mark Score Required NA - GENERIC PARAMETERS OF APPLICATION SERVER MONITORING SOFTWARE Maximum user handling capability As per license procured by customer - Concurrent user handling capability As per user concurrency - Valid Licence copy to be provided YES - Software supplied through URL Link - Certifications Benchmarking of Gartner - 5/7 Software Products No Of Days Training Provided At Site(DAYS) Zero - List Of Items Included In The Package 1 - Hyper link to Data sheet https:/www.ibm.com/in -en/marketplace/ibm- appscan-source - No of Softwares sold 10 - Number of User Referance from Government Departments where Software installed 1 - Details of Government Department email phone no Of concerned authority where Software installed for above NIC - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Chandra Dhameja N 110003, A BLOCK CGO COMPLEX NATIONAL INFORMATICS CENTRE NEW DELHI 1 15 EMD Required No ePBG Required No

Layer 2 Access Switch Layer 2 Access Switch ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Type of Switch Managed Managed Technology PoE+ PoE+ Number of 1G Copper Ports 24 24 Number of 10G Copper Ports 0 No. of 1 G SFP Port (Uplink) 4 4 No. of 10 G SFP+ Port (Uplink) 4 Multi-Gigabit Support Yes Yes, No Redundant Power supply ( from day one) Not available Available, Not available, Supported & Part of Supply, Supported Console Port Available - Switching Capacity -Non Blocking (Gbps) 128 - Throughput (MPPS) 95 - Operating System available - Dedicated Stacking Port/Slot ( from day Not available - 1/5 one) Stacking Bandwidth (Gbps) 0 - Basic Layer-3 Protocol Maximum number of Address Resolution Protocol (ARP) entries: 2, 000 • Maximum number of IPv4 unicast routes in hardware: 6500 • Routing protocols: • RIP v1/v2 • OSPF v1/v2 (with 4 active interfaces) • Static routing • Bidirectional Forwarding Detection (BFD) • IP directed broadcast - Security Feature MAC limiting • Allowed MAC addresses—configurabl e per port • Sticky MAC (persistent MAC address learning) • Dynamic ARP inspection (DAI) • Proxy ARP • Static ARP support • DHCP snooping • IP source guard • 802.1X port- based • 802.1X multiple supplicants • 802.1X with VLAN assignment • 802.1X with authentication bypass access (based on host MAC address) • 802.1X with VoIP VLAN support • 802.1X dynamic ACL based on RADIUS attributes • 802.1X Supported EAP types: Message Digest 5 (MD5), Transport Layer Security (TLS), Tunneled Transport Layer Security (TTLS), Protected Extensible Authentication Protocol (PEAP) • Captive Portal • Trusted Network Connect (TNC) certified - Management Protocol Neighbor discovery, Syslog, Telnet, SSH, J- Web, SNMP, NTP, DNS - 2/5 • Static routing QoS Layer 2 QoS • Layer 3 QoS • Ingress policing: 1 rate 2 color • Hardware queues per port: 8 • Scheduling methods (egress): Strict Priority (SP), shaped deficit weighted round-robin (SDWRR) • 802.1p, DSCP/IP precedence trust and marking • L2-L4 classification criteria: Interface, MAC address, Ethertype, 802.1p, VLAN, IP address, DSCP/IP precedence, TCP/UDP port numbers • Congestion avoidance capabilities: Tail drop - Operating Temperature Range (Degree C) 0 to 45 - Operating Humidity (RH)(%) 0 to 95 - IPv6 Ready from day one and dully certified Yes - PoE Power Budget ( Watt ) 370 - on Site OEM Warranty 5 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Palanalasa Venkata Surya Shyam Kumar 521104, School of Planning and Architecture, Sy. No. 71/1, NH-5, Nidamanuru, Vijayawada, Dist. Krishna, A.P., India 10 15

dot matrix printers Dot Matrix Printers ( 22 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Number of Pins (Nos.) 9 9, 24 Number of Columns (Nos.) 80 80, 136 Print Speed at Draft Mode at 10 cpi (cps) 10 Print Speed at High Speed Draft Mode at 10 cpi (cps) 300 Print Speed at NLQ Mode at 10 cpi for 9 pin only (cps) 10 - Print Speed at LQ Mode at 10 cpi for 24 pin only (cps) 12 - Input Data Buffer Capacity (KB) 100 50, 100 Auto share feature Yes - Parallel Port Available - USB Available - Network Interface ( LAN ) Not Available - Over all dimensions 147mm(H)x433mm(w) - 1/3 (Length x Width x Height) (mm) x379mm(d) Weight (Kgs) 5.7 - Power Supply 230 V AC - Power consumption- max in Print Mode (watts) 12 - Power consumption- max in Standby Mode (watts) 0.9 - BIS Registration under CRS of Meity Yes - BIS Registration Number - - Availability of test reports from Central Govt/NABL/ILAC accredited Lab showing conformity to the specification Yes - If yes, Test Report Number - - If Yes, Test Report date - - If Yes, Name of Test lab - - If yes, Address of Test Lab - - On Site OEM Warranty (Years) 1 1, 2 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 K.D. Singh 834001, Sr. Supdt. Of Post Offices, Ranchi 22 15 EMD Required No ePBG Required No

Notebook Computers-laptop Notebook Computers-laptop ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel Intel Processor Generation 7 th 7 th Processor Intel Core i5-7200U (upto 3.1 GHz, 3 MB cache, 2 cores) Intel Core i5-7200U (upto 3.1 GHz, 2 cores), Intel Core i7-7500U (upto 3.5 GHz, 4 MB cache, 2 cores) Graphics Graphics Type Integrated - Graphics Card Description INTEL HD GRAPHICS 620 - Graphics Memory (GB) NA - Memory Type of RAM DDR 4 - RAM Size (GB) 8 8 RAM Expandable upto (GB) 16 8, 16, 32, 64, NA RAM Speed (MHz) 2400 - Storage Type of Hard Disk Drive SATA SATA, SSD, Fusion, PCIe- based onboard SSD Hard Disk Drive Size( GB) 1000 128, 256, 512, 500, 1000, 2000 Hard Disk Drive Speed 5400 - 1/3 (rpm) Operating System Operating System Windows 10 Professional Windows 10 Professional, Windows 10 Home Ports USB 3.0 or higher (No.) 2 - USB Type C Available - VGA Port Available - HDMI Port Available - DISPLAY PORT Not-Available - Thunderbolt Port Not-Available - Connectivity Network Connectivity Ethernet Gigabit 10/100/1000 - Wi-fi Connectivity 802.11 ac - Bluetooth 4.0 or higher - Display Display Type Non Touch - Display Size (Inch) 14 14, 14.0 Display Resolution (Pixel) 1366 x 768 1366 x 768, 1440 x 900, 1920 x 1080, 2304 x 1440, 2560 x 1600, 2736 x 1824, 2880 x 1800, 3200 x 1800, 3840 x 2160 Certification BIS Registration under CRS of Meity Yes - BIS Registration no. - - BEE/Energy Star Certification - - ROHS Compliance Yes - Additional feature Finger Print Reader Yes - Webcam (HD or Better) Available - Miscellaneous Optical Drive Available - Keyboard Standard - Trusted Platform Module Enabled Yes - Weight (With Battery) (Kg) 2 - Carry Case Included Included, Not Included Power Battery Type (Li-Ion/Li- Polymer) Built-in - Battery Back-up (Hours) 5 - Warranty Battery Warranty 1 1, 3 2/3 (Year) On Site OEM Warranty (Year) 3 1, 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Arun Kumar 324001, Near anta ghar, Nayapura, Kota 1 15 Required No ePBG Required No

Multifunction Machines

medical stools or chairs Average Turn Over of Last 3 Years 3 Lakh (s) Experience with Gov. Required 3 Year (s) Medical Stools Or Chairs ( 80 ) Technical Specifications Specification Specification Name Values Allowed Values Material and shape of Stool Material of Back rest NA Material of cushion NA Cushioning in the stool Top Without cushion with Cushion, Without cushion Finish POWDER COATED Design of Back rest NA Back rest support Frame Material NA No of Legs in the under structure 4 Foot rest With With, Without Shape of stool top Square - Material of Top wood Stainless Steel, wood, Mild Steel Covering material of cushion NA - Leg shoe Material NEOPRENE Painting Powder coating Stove enamel, Powder coating, Polishing, Other 1/3 s Density of Cushion (Kg/cub metre) NA Type of Stool Fixed Fixed, Revolving Material of Under Structure CRCA TUBE Back rest Without With, Without Dimensions Adjustable Height false Normal Height (mm) 600 Back rest height (mm) NA Min. Height (mm) 600 Diameter/Side length of Top (mm) 305 Thickness/Size of Under structure Frame (mm) 1.6 MM Thickness of cushion (mm) NA Max. height (mm) 618 Back rest Thickness (mm) NA Stool Top base Thickness (mm) 18 Over all width/Diameter (mm) 420*420*600 MM Drawing and product code Drawing No. available on web false - Drawing No. NA - Product Code No. NA - Product Code available on web false - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 uma shanker shrivastava 325220, ADMN. BUILDING, SHAKTI PARISAR, CTPP, MOTIPURA, TELSIL- CHHABRA, DISTT. BARAN, RAJASTHAN-325220 80 30 2/3

computer servers, operating system software Average Turn Over of Last 3 Years 100 Lakh (s) Experience with Gov. Required 3 Year (s) Computer Servers ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Form Factor Rack Rack, Tower Size (RU) 1 - Processor Make Intel Intel Max. Number of sockets available on chipset 2 Max. Number of sockets populated with processor 2 Number of core per Processor 8 8 Processor Configuration Intel Xeon Silver 4110 ( 2.10GHz/8-core/11MB/8 5W) Intel Xeon Silver 4110 ( 2.10GHz/8-core/11MB/8 5W) Chipset compatible with CPU INTEL CHIPSET - Availability of Co- Processor No - If Yes Co-Processor Configuration NA As per GeM Catalogue. PCI Slots (Express Gen 3 - 1/8 3.0) Type of RAM DDR4 - RAM Size (GB) 64 64 RAM upgradable upto (GB) 512 DIMM Slots (No.) 16 - Type of Hard Disk Drive SAS SAS Hard disk drive Capacity (GB) 1800 Hard disk drive Speed (RPM) 10K - RAID Controller Cache (MB) 1024 - RAID Type 5 - RAID Controller Ports @12 Gbps 8 - Video Controller (support VGA or above resolution) Yes - Keyboard No - Mouse No - Bays (min. 2 internal or more hot plug) 8 - USB Ports (version 2.0/3.0) 3 - Certifications Compliance support by Windows, Red Hat or Novell. or Oracle Cluster S/W Yes - DVD ROM (or better) 8x or better - Network Card Supported 10G - FC HBA Dual port card NA - FC HBA Dual port card Speed NA - Power Management Screen blanking, hard disk & system idle mode in power on, set up password, power supply surge protected - Redundant Power Supply Yes - Redundant Fan Yes - 2/8 Total No of Ports 2 x 10GBPS + 2 x 1GBPS - Declare SPEC int_rate_base 2006 &amp; specfp_rate_2006 for 1, 2, 4, 8 prcessor as applicable. NA - Server scalability to be achieved within the box without adding nodes Yes - RoHS Compliance Yes - BIS Registration number & its Validity R-41000388 - Max. power consumption of the system (Watt) 750 - Availability of Type test reports consisting of verification of all the features & functional parameters & environmental tests sequences as under: a Dry heat test (For 16 hrs at a temperature of 45 degree C in accordance with IS: 90 00/part-3/section-5/197 7) b Cold test(For 4 hrs at a temperature of 0 degree C in accordance with IS: 9000/part-2/sec tion-4/1977 c Damp Heat Cyclic Test ( For 2 cycles of 24 hrs at a temperature of 40 degree C & 95% RH in accordance with IS: 90 00/part-5/section-1/198 1) Note:- The server shall be checked for all the parameters before conditioning, After completion of the above environmental tests sequence, with a recovery period of 1 to 2 hrs, the server shall be functional Yes - Name address of Lab NA - Test Report No. date NA - 3/8 Power Supply 230 V +/-10%, 50 Hz - On Site OEM Warranty (years) 3 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 JAIPAL SINGH 110124, Office of the Comptroller and Auditor General of India, Pocket 9, Deen Dayal Upadhyaya Marg, New Delhi-110124 2 15 Operating System Software ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values BASIC INFORMATION OF OPERATING SYSTEM SOFTWARE(GOLDEN) Software Domain Type Proprietary Item Proprietary Item, Enterprise open source Name of Software WinSvrSTDCore 2016 SNGL OLP 2Lic C CoreLic (16 Core/8 licenses - Name of the OEM Microsoft - OEM Model/Part No. 9EM-00123 - Product Id of OEM 9EM-00123 - Software Version/Version Name WinSvrSTDCore 2016 - Date of Launch of Version 2016 - FEATURES AND FUNCTIONALITY PARAMETERS(GOLDEN) Type of Operating System Server (Network) Operating System Desktop/Laptop Personal Computers Work-Station Operating System, Mobile Devices Tablet Computers Operating System, Server (Network) Operating System, Mainframe Operating System, Super Computer Operating System, Web server Operating System Tasking multi-tasking OS single tasking OS, multi- tasking OS 4/8 Users Multi User Single User, Multi User Distributed Operating System false Resource Access Control true If Yes, details of Access Control SVR CAL - Installation and Demonstration true Supports Virtualization true No. of days Training Provided at Site (DAYS) UPTO 5 0, UPTO 5, 6 TO 10, 11 to 20 Number of Years upto which Support(Warranty) is available from OEM Franchise online (YEARS) 3 3 FEATURES AND FUNCTIONALITY PARAMETERS(GENERIC) Real-time Operating System true - Library Operating System true - Graphical User Interface (GUI) true - Supported File Systems Disk file systems - Kernel Type Micro Kernel - Package Management true - If Yes, details of Packages Proprietary software systems - Bit-type (BITS) 64 - Native APIs false - Non-Native APIs supported through subsytems false - If Yes, details of supported APIs NA - Subsystem Isolation Mechanisms false - If Yes, details of Isolation Mechanisms NA - High availability extension true - Integrated Firewall true - 5/8 If Yes, details of Firewall WINDOWS FIREWALL - Encrypted File System false - SUPPORTED HARDWARE REQUIREMENT PARAMETERS Hard Disk Space required (GB) 20 - RAM Size required 4 - CPU Required 1 - Operating Systems supported (Driver) Windows Based - Supported Devices NA - Supported Web browsers Internet Explorer - Supported Database SQL, Oracle - Number of Devices Managed 1 - GENERIC PARAMETERS OF OPERATING SYSTEM SOFTWARE Free Upgradation to Higher Version YES - Maximum user handling capability 250 - Concurrent user handling capability 1 - Valid Licence copy to be provided YES - Software supplied through URL Link - List of items included in the package license - Hyper link to Data sheet www.microsoft.com - No of Software sold 50 - Number of User Referance no. 1 with in Government Department email, phone no.Of concerned authority where Software/Appliance installed 1 - Details of Government Department email, phone no.Of concerned authority where Software/Appliance installed for above. Border Security Forces, CGO Complex Delhi - * Bold specifications are the golden parameters. Consignees and Quantity 6/8 S.No. Consignee Address Quantity Delivery Days 1 JAIPAL SINGH 110124, New Delhi-110124 2 15 Advisory Bank HDFC Bank EMD Percentage(%) 2.00 EMD Amount 18052 ePBG Advisory Bank State Bank of India ePBG Percentage(%) 2.00 Duration of ePBG required (Months). 36

water truck cabin truck with water tank Water Truck Cabin Truck With Water Tank ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Engine Capacity (cc) 5675.0 5655, 5675, 5675.0, 576 0, 5760.0, 5883, 5883.0 Water Tanker Capacity (Litres) 9000.0 9000, 9000.0 Make of Chassis Semi Forward Control 4x2 Chassis - Chassis Model No. TATA SE1613/42 4X2 BSIV - Category of Vehicle for which Chassis to be used Heavy Capacity Commercial Vehicles Heavy Capacity Commercial Vehicles Body Style Mild Steel Water Tanker With 9KL Capacity - Body Options Fixed Side Deck Customizable, Fixed Side Deck Type of Fuel Diesel Diesel Vehicle Emission Compliance bs iv bs iv Vehicle Mileage (declared by OEM as certified by Test Agency under Rule 115of CMVR 4.4 1/6 1989)(Km/Ltr) Speed, Max (Km/Hr) 80.0 Engine Power BHP@rpm (BHP@rpm) 134 BHP @ 2200-2400 Rpm BHP@rpm 132kw2400rpm, 134bhp 2200-2400rpmbhprpm, 170.31bhp2400rpm Engine Torque Max, @ rpm (N- M@rpm) 490 Nm @ 1400-1600 Rpm N-M@rpm 490nm1400-1600rpmn- mrpm, 620nm1200-190 0rpm, 660nm1200-1900 rpm Engine Aspiration Turbocharged Intercooled Turbocharged Intercooled No of Cylinder in Engine(Nos) 6.0 - Fuel Tank Capacity (Litres) 225.0 Gradeability of Chassis(%) 26.0 - Ground Clearance (mm) 239.0 Wheel Base (mm) 4225.0 Kerb Weight (Kg) 4900.0 Gross Vehicle Weight (Kg) 16200.0 No of Axle (Nos) 2.0 - BIS marked Pneumatic Tyres and tubes for both front and rear Yes Yes Chassis Transmission System Manual Automatic, Manual No. of Speed/Forward Gears 6.0 - Type of Steering Power Power Turning Radius (mm) 8400.0 Speed Governers with valid certification true - Gross weight of Water Tanker (Kg) 6000.0 Transportation Charge in Rupees Per Km (Rs/Km) 16.2 Certification Vehicle Certification ARAI/VRDE/ICAT No. AAIN 0131 Standard automobile paint to the exterior body as per CMVR Yes - 2/6 Rules for Water Tanker. Performance Parameters Standard Sparewheel and Tool Kit Yes - Net water carrying capacity (Litres) 9000.0 Total capacity of water tank (Litres) 9000.0 9000.0 Battery Warranty (Months) 12.0 12, 24, 36 Warranty Time (Month) 12.0 12, 36 Warranty Distance (Unlimited during warranty period)(Km) Yes - No. Of Free Service 3.0 Constructional Parameters Length of Chassis (mm) 6970.0 - Width of Chassis (mm) 2434.0 - Height of Chassis (mm) 2550.0 - Axle Configuration( Number of Outside Tyre x Number of Driving Tyre) 4X2 - Type of Front Axle and Suspension System Heavy Duty Forged I Beam, Reverse Elliot Type & Semi Elliptical Leaf Spring - Type of Rear Axle and Suspension System Single Reduction Heavy Duty, Hypoid Gear, Fully Floating Axle Shaft & Semi-Elliptical Leaf Spring - Size Of Front Tyres 10.00 X 20 -16 PR - Size Of Rear Tyres 10.00 X 20 -16 PR - Size of Wheel 20.0 - ABS Fitted true Front Vehicle Brake Full Air S-Cam Brake - Rear Vehicle Brake Full Air S-Cam Brake - Type of Clutch Single Plate Dry Friction Type - Side View Mirror true - Low Fuel warning Light true - Fog Lights false - Constructional Details of Cabin truck with water D + 1 3/6 Tank : Seating Capacity (in the cabin) Seating Capacity layout with dimensions Yes - Nominal Thickness of M.S.Plate used for fabrication of water tank to IS:1730 latest and IS :2062 latest for E-250BR steel grade. (mm) 3.15 - Size of channel used for frame for mounting on chassis. Depth:223 Mm (Max), Width: 60 Mm Thickness: 7 Mm - Dimensions (L X W X H)(mm) 3875 X 2235 X 1420 Relavent surface treatment/paint details for inner surface ensuring the potability of water as per IS false Hat type tube diameter/or other frame for body of main structure welded with/for Monocoque NA for factory built cabins 25, NA for Monocoque, NA for factory built cabins Hat type tube diameter/or other frame( thickness of 1 (dot )6mm(min) for side and roof of main structure welded with for Monocoque Top Rail – 1mm; Top Rail Cover – 1mm; Post LH/RH– 2mm; Panel Inner W/S – 1mm; Panel Inner Outer – 1mm; Roof – 1mm; Rear Wall Inner & Outer Panel – 0.8mm; Long Member – 2mm - Base Frame Structure ISMC to be fastened with chassis with U Bolts/for Monocoque (mm) ISMC - Exterior Panel thickness of side body and roof/for Monocoque Steel sheet of thickness 1 mm (min.) - Interior Panel thickness of side body and roof for Monocoque gi sheet of thickness 0 8 mm min - Flooring Made Out from ISI Marked 12 mm thick NA for factory built cabins - 4/6 BWR grade plywood covered with vinyle/Aluminium sheet Seating Plan:- Co- driver seat suitable for One/two persons (tilt able type/fixed type) Yes - Doors:- Flap type door with fixed toughened glass & locking mechanism manually operated window for Driver, Co-driver Compartment Yes - Glasses:- Front wind screen, rear glass in two pieces (toughened type glass as per ARAI approved) Window with lock cum handle Yes - Top portion of fixed glass window & bottom portion in two halves in sliding pattern false - Front Bumper Hook Yes - Rear Hook Yes - Fire Extinguisher Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 SHAIK SHAHID HUSSAIN 441109, Regional Stores, WCL PO SILEWARA COLLIERY Dist. Nagpur (M.S.) Pin 441 109 1 90 2 Lakshminarayana Magaraju 442706, WCL Ballarpur Area PO Sasti Distt Chandrapur (M.S) Pin 442 706 1 90 EMD Required No ePBG Required No

designing software Designing Software ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values BASIC INFORMATION OF DESIGNING SOFTWARE(GOLDEN) Software Domain Type Architectural Architectural, electrical, mechanical Name of Software Architecture Engineering Construction New Single-User ELD 3-Year Subscription with Basic Support OR latest versiion - Name of the OEM Autodesk - OEM Model/Part No/Product Id of OEM 02HI1-WW7891-T834 - Software Version/Version Name AEC IC 2018 SU - Date of Launch of Version March-2017 - FEATURES AND FUNCTIONALITY PARAMETERS(GOLDEN) Advance surfacing false Composite Material Design false Conceptual design true Direct Modeling true Electrical cable and Conduit design false 1/5 Mesh CAD Models true Mold design false Parametric Modeling true Plastic Parts Design false Weldments false 2D System Analysis true Circuit Simulation false Fluid Flow Simulation false Human Simulation true Motion Simulation false Stress Analysis false Structural Validation true Sustainability Analysis false If yes, Other Simulation/Analysis Features NA Photorealistic Images true Walk-Through Animation true If yes, Other Animation Rendering Features NA Compare Costs false Output Cost Report false Automatic Cost Estimation false No. of days Training Provided at Site upto 5 0, upto 5, 6 to 10, 11 to 20, 21 to 30 Number of Years upto which Support is available from OEM/Franchise online (Years) 3 1, 2, 3, 5, 10 FEATURES AND FUNCTIONALITY PARAMETERS(GENERIC) 2D Drawing true - 3D Modeling true - Fastening Systems false - Large Assembly Design false - Piping Tubing Design false - Sheet Metal Design false - 2/5 Collision and Interference Check true - Assembly Animation false - Rendering true - Bill of Materials true - If yes, Other Cost Estimation Features NA - Annotations true - Dimensions true - Tolerance true - Wireframes false - Other Documentation Features NA - SUPPORTED HARDWARE REQUIREMENT PARAMETERS Hard Disk Space Required 50GB - RAM Size required 16GB - CPU required Core i5 or above - Operating Systems supported (Driver) Windows 7 or higher - Supported Devices NA - Supported Database NA - GENERIC PARAMETERS OF DESIGNING SOFTWARE Free Upgradation to Higher Version YES - Maximum user handling capability NA - Concurrent user handling capability NA - Valid Licence copy to be provided YES - Mode of License to be delivered Electronic - Software supplied through URL Link - Installation and Demonstration true - List of items included in the package Revit, AutoCAD Civil 3D, Infraworks, AutoCAD, Advance Steel, AutoCAD Architecture, Map 3D, MEP, Plant 3D, Rastar design, Navisworks Manage, Recap Pro, Autodesk rendering, 3/5 3Ds Max Hyper link to Data sheet https:/www.autodesk.c om/collections/architec ture-engineering- construction/overview - No of Softwares sold 600 - Number of User Referance no. 1 with in Government Department email, phone no.Of concerned authority where Software/Appliance installed 1 - Details of Government Department email, phone no.Of concerned authority where Software/Appliance installed for above. Northern Railway - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Swapan KUMAR 110002, Information Technology Department, 24th Floor, Civic Center, Delhi-110002 2 15

Notebook Computers-laptop

Desktops

Multimedia Projectors

Multifunction Machines

All in one Average Turn Over of Last 3 Years 200 Lakh (s) Experience with Gov. Required 3 Year (s) All In One ( 50 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel - Processor Generation 7th 6th, 7th, 8th Processor Intel Core i5-7400T (2.4 GHz, 6 MB Cache, 4 Cores) Intel Core i5-7400T (2.4 GHz, 4 Cores) Chipset Chipset Q270 - Graphics Graphics type Integrated - Graphic Card Description Intel HD Graphics 630 - Storage Type of Hard disk drive SATA SATA, SSD, Fusion Hard Disk Drive Size (GB) 1000 500, 1000, 2000 Hard disk drive speed (RPM) 7200 - RAM Type of RAM DDR4 - RAM Size (GB) 4 4, 8, 16, 32 RAM Expandability 32 8, 32, Not-Available 1/3 Upto (GB) Ram speed (MHz) 2400 - Operating System Operating system Windows 10 Professional Windows 10 Home, Windows 10 Professional, Linux, Mac OS Sierra, Mac OS High Sierra OS Certification Windows - Display Display Size (Inch) 21.45 21.45 Type of Display Non Touch Touch, Non Touch display resolution (Pixels) 1920 x 1080 1920 x 1080, 3200 x 1800, 1920 x 1080 with IPS Technology, Retina 4K Display (4096 x 2304) with IPS Technology, Retina 5K Display (5120 x 2880) with IPS Technology, 1600 x 900 TCO Certification Yes - Ports USB Port 2.0 (No.) 6 - USB Port 3.0 (No.) 2 - VGA Port Available - HDMI Port Available - Thunderbolt Port (No.) 1 - Display Port Available - Input Devices Keyboard Standard with USB Interface - Mouse Optical Scroll with USB Interface - Audio Integrated Stereo Sound with internal speakers & Mic. - Connectivity Wi-fi Connectivity 802.11 ac - Bluetooth Connectivity 4.0 or higher - LAN Port Integrated Gigabit Ethernet 10/100/1000 - Certification BIS Registration under CRS of Meity Yes - BIS Registration no - - Certifications Available Energy Star - ROHS Compliance Yes - Power Maximum Wattage (Watts) 180 - 2/3 Power Efficiency (%) Minimum 80 - Others Webcam HD - DVD R/W Available - Optical drive Integrated - Stand Standard - On Site OEM Warranty (Year) 5 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Jashwant Kumar Suryavanshi 465441, GOVT. POLYTECHNIC COLLEGE CAMPUS, MODEL HIGHER SECONDARY SCHOOL, NARWAL ROAD, AGAR, MALWA (NEW DISTRICT) 50 15 EMD Advisory Bank HDFC Bank EMD Percentage(%) 2.00 EMD Amount 59890 ePBG Required No

art or craft paper Art Or Craft Paper ( 200000 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conformity to Indian Standard IS 4658 : Latest Yes - ISI Marked No - CM/L Number and Date NA - Test Report Details Avaliability of Test report fron Govt. NABL/ILAC Laboratory to prove conforming to specification. Yes Yes Test report Number and Date E/NCERT/E17030658/S US/30.06.17/64 DT 06.07.17 - Name and Address of the testing Laboratory RITES, CULCUTTA - Size and Grammage of Paper Size of Art paper A1 A0, A1, A2, A3, NA Grammage in g/m2 220 220 Type and Coating Type of Coated Art paper/Board Art Card Art Card Coating on sheet On both side On both side Dimension of Paper Length of paper sheet in mm 940 940 1/3 Width of paper sheet in mm 610 610 Physical Characteristics Cobb Value (One Minute) Front Max. (g/m2) as per IS Yes - Stiffness Factor (Min.) as per Amend No. 2 of IS Yes - Brightness (On coated side) Min (%) 80 - Surface pH 6.84 - Burst Index (Min.) in K.Pa.m2/g as per IS Yes - Wax Pick number pick on 5A Yes - Cobb Value (one Minute) Back Max. (g/m2) as per IS Yes - Gloss (Min.) in % as per IS Yes - Smoothness (Bendsten) Back Max. (ml/min) as per IS Yes - Smoothness (Bendsten) Front Max. (ml/min) as per IS Yes - Bulk Min. (cc/g) as per IS Yes - Weight Net Weight of paper/board (kg) sheets/Reels 63.776 As per GeM Catalogue. Packing and Finishing Packing of paper In sheets In sheets Finsh of Paper Paper should be evenly finish, dimensional stable and free from loosely bound fibers abd blistrs. - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Manoj Jain 201309, A 24/25 INSTITUTIONAL AREA SECTOR 62 NOIDA 200000 30 2/3

roti maker domestic bread making machines Average Turn Over of Last 3 Years 10 Lakh (s) Roti Maker Domestic Bread Making Machines ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Machine Type Machine Type Rotary Wheel mechanism - Chapati Collect Chapati collection Automatic collection to storage Bin - Design Start/Response Time for first Chapati comming to Bin(min) 10 - Dough Ball weight Range (25 to 45 gms) minimum yes yes Structural/Covering material of the machine Stainless Steel - Power consumption (watt) 2000 As per GeM Catalogue. Shape of Chapati Round - Chapati Colour Light brown - Power efficient machine yes - Chapati diameter (mm) 175 175 Automation Automatic, with Dough Automatic, with Dough 1/3 Ball making Process Ball making Process Quality of Chapati Soft with Puffed layer - Fuel efficient Machine yes - Details Of Display On Control Panel Temparature Controller true - Volt Meter true - Toggle Switch true - Push Starter true - Rotary Switch true - Emergency Switch And Indicators true - Dimension Input Voltage (volt) 230 +/- 10% 230 +/- 10% Chapati making Capacity (nos/hour) 1000 1000 Fuel Consumption(LPG) (kg/Hr) 1-1.5 - Over all length ( in MM ) 3000 As per GeM Catalogue. Over all width ( in MM ) 2250 As per GeM Catalogue. Over all height ( in MM ) 1500 As per GeM Catalogue. Input Power (phase) Single Single, Three Fuel Type of fuel LPG - Test Report Certification ISO 9001:2008 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sunil Kumar Sahdev 110009, Rajan Babu Institute of Pulmonary Medicines & Tuberculosis KINGSWAY CAMP 1 15 Required No ePBG Advisory Bank State Bank of India ePBG Percentage(%) 2.00 Duration of ePBG required (Months). 14

Printer

Desktops Desktops ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel Intel, AMD Processor Generation 7th 6th, 7th, 8th Processor Intel Core i3-7100 (3.9 GHz, 3 MB Cache, 2 Cores) Intel Core i3-6100 (3.7 GHz, 2 Cores), Intel Core i3-6300 (3.8 GHz, 4 MB Cache, Intel Core i3-6320 (3.9 GHz, Intel Core i5-6400 (2.7 GHz, 6 MB Cache, 4 Cores), Intel Core i5-6500 (3.2 GHz, Intel Core i5-6600 (3.3 GHz, Intel Core i7-6700 (3.4 GHz, 8 MB Cache, AMD A4-7300 (3.8 GHz, 1 MB Cache, AMD A4-8350B (3.5GHz, AMD A6-7400 (3.5GHz, AMD A6-8550B 1/7 (3.7 GHz, AMD A6-9500 (3.5 GHz, AMD A8-7600 (3.1 GHz, AMD A8-8650B (3.2 GHz, AMD A10-7800 (3.5GHz, AMD A8-9600 (3.1 GHz, 2 MB Cache, AMD A10-8750B (3.6 GHz, AMD A10- 9700 (3.5 GHz, 4 Cores ), AMD A12-9800 (3.8 GHz, Intel Core i5-7500 (3.4 GHz, Intel Core i7-7700 (3.6 GHz, Intel Core i3-7100T (3.4 GHz, Intel Core i3-7100 (3.9 GHz, Intel Core i3-7101E (3.9 GHz, Intel Core i3-7101TE (3.4 GHz, Intel Core i3-7300 (4 GHz, Intel Core i3-7300T (3.5 GHz, Intel Core i3-7320 (4.1 GHz, Intel Core i3-7350 (4.2 GHz, Intel Core i5-7400T (2.4 GHz, Intel Core i5-7400 (3.0 GHz, Intel Core i5-7500T (2.7 GHz, Intel Core i5-7600T (2.8 GHz, 4 2/7 Cores), Intel Core i5-7600K (3.8 GHz, Intel Core i5-7600 (3.5 GHz, Intel Core i7-7700T (2.9 GHz, Intel Core i7-7700K (4.2 GHz, AMD Ryzen 5 1400 (3.2 GHz, 4 Core), AMD Ryzen 5 1600 (3.2 GHz, 16 MB Cache, 6 Core), AMD Ryzen 5 1500 (3.5 GHz, AMD Ryzen 3 1200 (3.1 GHz, AMD Ryzen 3 1300 (3.5 GHz, Intel Pentium G4560 ( 3.5 GHz, Intel Core i3-8100 (3.6 GHz, Intel Core i3-8350K (4.0 GHz, Intel Core i5-8400 (2.8 GHz, 9 MB Cache, 6 Cores), Intel Core i5-8600K (3.6 GHz, Intel Core i7-8700 (3.2 GHz, 12 MB Cache, Intel Core i7-8700K (3.7 GHz, Intel Pentium Silver J5005 (1.5 GHz, Intel Pentium G4600T (3.0 GHz, Intel Pentium G4600 (3.6 GHz, Intel Pentium G4560T (2.9 GHz, Intel Pentium G4560 (3.5 GHz, Intel Celeron J4005 (2.0 GHz, 4MB 3/7 Cache, Intel Celeron J4105 (1.5 GHz, 4MB Cache, Intel Celeron G3930 (2.9 GHz, 2MB Cache, Intel Celeron G3930E (2.9 GHz, Intel Celeron G3930T (2.7 GHz, Intel Celeron G3930TE (2.7 GHz, Intel Celeron G3950 (3.0 GHz, AMD PRO A6-8570E (3.0 GHz, 2 Core), AMD PRO A6-9500E (3.2 GHz, AMD PRO A8-8670E (2.8 GHz, AMD PRO A10-8770E (2.8 GHz, AMD PRO A10-9700E (3.0 GHz, AMD PRO A12-8870E (2.9 GHz, AMD PRO A12-9800E (3.1 GHz, Intel Celeron N 3350 (2.4 GHz, AMD Ryzen 3 PRO 2200GE (3.2 GHz, AMD Ryzen 3 PRO 2200G (3.5 GHz, AMD Ryzen 5 PRO 2400GE (3.2 GHz, 8 Core), AMD Ryzen 5 PRO 2400G (3.6 GHz, Intel Core i5-8500 (3.0 GHz, 6 Cores) Motherboard Chipset Intel H110 Intel H110, Intel H170, Intel Q150, Intel Q170, Intel B170, Intel Z170, AMD A Series, AMD B SERIES, Intel Q270, Intel B250, Intel Q250, Intel H270, Intel Z270, Intel X299, Intel Z370, Intel 4/7 H370, Intel Q370, Intel B360, Intel H310 Expansion Slots (PCIe x 1) (Number) 1 - Expansion Slots (PCIe x 4) (Number) 1 - Expansion Slots (PCIe x 16) (Number) 1 - Graphics Graphics Type Integrated - Graphic Memory N/A - Operating System Operating System (Pre-Loaded) Windows 10 Professional Windows 10 Profession al, Linux, DOS, Windows 10 Home, Windows 10 Professional under Microsoft Shape the Future Program RAM Type of RAM DDR 4 - RAM Size (GB) 4 4, 8, 16, 32 RAM Expandability upto (GB) 32 16, 32, 64 RAM Speed (MHz) 2400 - Storage Hard Disk (GB) 1000 500, 1000, 2000 Cabinet Cabinet Tower - Cabinet Volume (Litres) - - Internal Bays 1 - External Bays (Number) 1 - DIMM Slots (Number) 2 - Connectivity Wireless Wi-Fi 802.11ac - Network Connectivity 10/100/1000 on board Integrated Gigabit Port - Ports USB Port 2.0 (Number) 2 - USB Port 3.0 (Number) 4 - Serial Port true - Parallel Port true - VGA true - HDMI false - Display Port false - Monitor Monitor Size (INCHES) 21.5 18.5, 19.5, 21.5, 24, 27 Monitor Resolution (PIXELS) 1920x1080 1366x768, 1920x1080, 3 200x1800, 3840 x 2160, 1440 x 900, 1600 5/7 x 900 Monitor Certification - - Power Power Supply (Watt) - - Minimum Power Efficiency(%) 85 - Certification ROHS Compliance Yes - BEE/Energy Star for the given Model true - Input Devices Mouse Optical - Keyboard Standard - Generic Optical Drive DVD R/W - Internal Speaker true - On Site OEM Warranty (Year) 3 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajesh Singh 744101, Opposite. Anthropoligical Museum, Behind Telehone bhavan, Chief Pay & Accounts Office, Port Blair 2 15 EMD Required No ePBG Required No

hopper or tipper Experience with Gov. Required 1 Year (s) Hopper Or Tipper ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, Garbage Tipper - Main Engine Capacity (cc) 702 Make of Chassis Garbage Tipper Type of Chassis Frame Ladder Type Frame With Inverted Hat Section Long Members Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission bs iv bs iv, BS-III (only for 1/6 Complaince Defence) Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 21.5 Speed, Max (Km/Hr) 60 - Main Engine Power BHP@rpm (BHP@rpm) 16 HP @ 3200 RPM BHP@rpm - Engine Torque Max, @ rpm (N- M@rpm) 39 NM @ 1800 - 2200 Main Engine Aspiration Natural Aspiration Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 30 Gradeability of Vehicle with load( %) 16.38 - Gradeability of Vehicle without load ( %) 18 - Ground Clearance (mm) 160 Wheel Base (mm) 2100 - Kerb Weight (Kg) 720 Gross Vehicle Weight (Kg) 1700 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) 4X2 - Type of Front Axle and Suspension System Rigid Beam Axle With Parabolic Leaf Spring & 2 Nos. Double Acting Telescopic Hydraulic Shock Absorbers - Type of Rear Axle and Suspension System Banjo Type Live Axle With Parabolic Leaf Spring & 2 Nos. Double Acting Telescopic Hydraulic Shock Absorbers - 2/6 Type of BIS MARKED Vehicle Tyre Tube - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 4 - Type of Steering Manual Manual, Power Operated Turning Radius, Min (mm) 4300 Speed Governers No - ABS Fitted No - Front Vehicle Brake Disc Brake Hydraulic, Dual Circuit Diagonal Split With Tandem Master Cylinder Acting On All Wheels With Automatic Wear Adjusters - Rear Vehicle Brake Drum Brake Hydraulic Type of Clutch 170mm Single Plate Dry Friction Diaphragm Type - Tipping Angle (Degree) 48 Tipper Container cap acity/Volume(cubic metres) 2.5 Certification Chassis Certification ARAI/VRDE/ICAT No. AAHN0151 F03 Dtd. 17-02-2017 Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 12 - No. Of Free Service (Nos) 5 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3800 - Width of Chassis (mm) 1500 - Height of Chassis (mm) 1845 - Size Of Front Tyres (mm) 145 R 12 - 8PR mm - 3/6 Size Of Rear Tyres (mm) 145 R 12 - 8PR mm - Size of Wheel (mm) 4 Tipper body Pivot length (mm) 1546 - Tipper body Length (mm) 2165 - Tipper Body Height (mm) 672 - Overall Height of Tipper from Ground (mm) 1491 - Body Plate Thickness (mm) 2 Main Frame Thickness (mm) 3 Pneumatic System true - Hydarulic System true - Tipping Hydraulic Cylinders(Make) Wipro/dental/Equivalen t Reputed Make/isi make - Hydraulic System Driven by Main Engine - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation true - If Yes Auxiliary Diesel Power (HP@rpm) NO Auxiliary Diesel Engine Transmission NO Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Dumping Height (mm) 354 Engine Oil Pressure Level Indicator in true - 4/6 Control Panel Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter true - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Surendra Gangadhar Chochamkar 442902, Municipal Council Bhadrawati Dist.Chandrapur 1 15 EMD Required No ePBG Required No

Printer, Printer Printer ( 176 ) Technical Specifications Specification Specification Name Values Allowed Values Specifications Printing Technology Laser laser Cartridge Technology composite composite, separate toner and drum, Ink Type of printing mono mono, Colour Paper Size a 4 A4, A3 Print Speed (A4) - Mono (PPM) 27 Print Speed (A4) - Color (PPM) 0 Resolution (Dpi) up to 1200 x 1200dpi (equivalent), 600 × 600dpi 1200 × 1200dpi equivalent N/A Memory (MB) 512 N/A Hard Disk Capacity (GB) 0 N/A Processor Speed (Mhz) 800 N/A Duplexing Feature yes N/A Duplex Print Speed (PPM/IPM) 14 Network Connectivity yes N/A Network Interface, if Ethernet 10/100/1000 N/A 1/6 available Wireless Connectivity yes N/A If Yes, Type of Connectivity Wireless (802.11 b/g/n) N/A USB Port yes N/A Paper Tray Capacity 2 N/A Number of Paper Trays 250 N/A Yield of Cartridge/Ink Tank/Ink Pack supplied with printer(Per Set) 2400 N/A Life of Drum in terms of number of Prints in case of Separate Drum and Toner cartridge technology (No of Prints ) 27000 N/A Duty Cycle/month (No of Prints) 15000 N/A Operating Temperature Range (Degree C) Canon 10 - 30°C N/A Operating Humidity (RH) (In %) Canon 20% to 80% RH (no condensation) N/A Dimensions(In mm x mm x mm ) 390 x 365 x 245mm N/A Weight (In kg) 8 N/A BIS Registration under CRS of Meity Yes N/A BIS Registration no R-41001449 N/A On site OEM warranty (Years) 1 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kantiballabh Pandey 370201, A O Building EDP Section, Finance Department, Gandhidham 176 30 Printer ( 75 ) Technical Specifications Specification Specification Name Values Allowed Values Specifications Printing Technology inkjet inkjet, Laser 2/6 Cartridge Technology Ink composite, Ink Type of printing Colour mono, A3 Print Speed (A4) - Mono (PPM) 8 Print Speed (A4) - Color (PPM) 5 Resolution (Dpi) Up to 1200 x 1200 dpi black; Up to 4800 x 1200 optimized dpi colour N/A Memory (MB) 0 N/A Hard Disk Capacity (GB) 0 N/A Processor Speed (Mhz) 360 N/A Duplexing Feature No N/A Duplex Print Speed (PPM/IPM) 0 Network Connectivity No N/A Network Interface, if available NA N/A Wireless Connectivity No N/A If Yes, Type of Connectivity NA N/A USB Port yes N/A Paper Tray Capacity 60 N/A Number of Paper Trays 1 N/A Yield of Cartridge/Ink Tank/Ink Pack supplied with printer(Per Set) 1000 N/A Life of Drum in terms of number of Prints in case of Separate Drum and Toner cartridge technology (No of Prints ) 0 N/A Duty Cycle/month (No of Prints) 1000 N/A Operating Temperature Range (Degree C) 5 to 40 N/A Operating Humidity (RH) (In %) : 20 to 80 N/A Dimensions(In mm x mm x mm ) 525 x 310 x 158 mm; Maximum: 525 x 553.5 N/A 3/6 x 256.6 mm Weight (In kg) 4.67 N/A BIS Registration under CRS of Meity Yes N/A BIS Registration no N/A N/A On site OEM warranty (Years) 1 1, Gandhidham 75 30 EMD Required No ePBG Required No

Notebook Computers-laptop Notebook Computers-laptop ( 13 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel intel Processor Generation 6 th 6th Processor Intel Core i3-6006u (2.0 GHz, 3 MB cache, 2 cores) intelcorei3-6006u(2.0g hz3mbcache2cores) Graphics Graphics Type Integrated - Graphics Card Description INTEL HD GRAPHICS - Graphics Memory (GB) NOT APPLICABLE - Memory Type of RAM DDR 4 - RAM Size (GB) 4 4 RAM Expandable upto (GB) 16 16 RAM Speed (MHz) 2133 - Storage Type of Hard Disk Drive SATA sata Hard Disk Drive Size( GB) 1000 128, 256, 512, 500, 1000, 2000 Hard Disk Drive Speed (rpm) 5400 - Operating System Operating System Windows 10 windows10professional 1/3 Professional Ports USB 3.0 or higher (No.) 2 - USB Type C Not-Available - VGA Port Available - HDMI Port Available - DISPLAY PORT Not-Available - Thunderbolt Port Not-Available - Connectivity Network Connectivity Ethernet Gigabit 10/100/1000 - Wi-fi Connectivity 802.11 ac - Bluetooth 4.0 or higher - Display Display Type Non Touch - Display Size (Inch) 14 14 Display Resolution (Pixel) 1366 x 768 1366 x 768, 1440 x 900, 1920 x 1080, 2304 x 1440, 2560 x 1600, 2736 x 1824, 2880 x 1800, 3200 x 1800, 3840 x 2160 Certification BIS Registration under CRS of Meity Yes - BIS Registration no. - - BEE/Energy Star Certification - - ROHS Compliance Yes - Additional feature Finger Print Reader No - Webcam (HD or Better) Available - Miscellaneous Optical Drive not available - Keyboard Standard - Trusted Platform Module Enabled Yes - Weight (With Battery) (Kg) 1.85 - Carry Case Included included Power Battery Type (Li-Ion/Li- Polymer) Removable - Battery Back-up (Hours) 5 - Warranty Battery Warranty (Year) 1 1 On Site OEM Warranty (Year) 3 3 2/3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 PRIYANKA DAS 764059, O/O THE DISTRICT PROJECT COORDINATOR, RTE, SSA, NABARANHAPUR NABARANGAPUR 13 15 EMD Advisory Bank HDFC Bank EMD Percentage(%) 2.00 EMD Amount 9333 ePBG Required No

Desktops

Desktops

Line Intractive UPS with AVR Line Intractive UPS With AVR ( 45 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Rating in KVA/min VAH capacity of battery (KVA/VAH) 1.0/168 1.0168 Technology MOSFET-PWM MOSFET-PWM, IGBT- PWM Type of battery SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 smf-vrlaconfirmingtojis c-8702pt12&3 Rated Output (Volt) Single Phase Quasi-Sin- wave 230 V AC, 50 Hz singlephasequasi-sin- wave230vac50hz Degree of protection IP-21 IP-21, IP 20 Inverter Efficiency (%) >/= 70% >/= 60%, >/= 70% Warranty for the battery from the date of delivery 1 year - Warranty for Line Interactive UPS 2 Years 1 Year, 2 Years, 5 Years Installation and commissioning instructions Yes - CONSTRUCTIONAL Type of enclosure ABS - AC out put for printer (not through inverter) No Yes, No 1/3 Inverter out put socket AC out put for printer (not through inverter) Not applicable 2 Three pin, 3 Three pin, Hard wiring, Not applicable FUNCTIONAL Total harmonic distorsion (%) </= 40% - Input (Volt) Single phase sinewave(160-280v) - Switching over time (Mili sec) Maximum 10 milli seconds - Overload Time (Minutes) >/= 10 minutes - Load power factor >/= 0.6 - Variation in AVR output in AC mode (%) AVR (Voltage regulation) output voltage in AC Mode 230 Volts +/-9%, 50 +/-3 Hz - Overload (%) >/=10% - Variation in output voltage in battery mode (%) (UPS output voltage in battery mode) 230 Volts +/- 10% - Variation on output frequency in battery mode (Hz) </=0.5 - PROTECTION Protection against (over discharge) discharge per 12v battery (Volt) 10.5 - Protection for outside input voltage range: If Input voltage goes outside the range 160 to 280 Volts, the system shall switch over to battery mode Yes - Protection against short circuit of UPS Yes - Protection for over voltage and over load Yes - REPORTS AND CERTIFICATIONS Damp heat Test at 45 degree, RH -95% for 2-cycle as per IS:9000 pt-5/sec-1 Yes - Dry heat Test at 45 degree for 16 Hrs as per IS:9000 pt-3/sec-5 Yes - 2/3 Cold Test as per IS:9000 pt-2/sec-4 Yes - Availability of the type test report from central Govt./NABL/ILAC Accredited Lab Yes - Type Test certificate no. and date R-41015563 - Name Of Lab BIS - Address of Lab DELHI - As per Meity (Government of India) guidelines UPS shall have valid BIS CRS certifications as applicable Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 PRIYANKA DAS 764059, O/O THE DISTRICT PROJECT COORDINATOR, RTE, SSA, NABARANHAPUR NABARANGAPUR 45 15 EMD Advisory Bank HDFC Bank EMD Percentage(%) 2.00 EMD Amount 3590 ePBG Required No

Multifunction Machines

hopper or tipper Hopper Or Tipper ( 3 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, - Main Engine Capacity (cc) 702 - Make of Chassis - - Type of Chassis Frame - - Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) Fuel Consumption ( declared by OEM as 21.5 1/5 certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) Speed, Max (Km/Hr) 60 - Main Engine Aspiration Natural Aspiration Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 30 Gradeability of Vehicle with load( %) 16.38 - Gradeability of Vehicle without load ( %) 18 - Ground Clearance (mm) 160 Wheel Base (mm) 2100 - Kerb Weight (Kg) 720 Gross Vehicle Weight (Kg) 1700 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - - Type of Front Axle and Suspension System - - Type of Rear Axle and Suspension System - - Type of BIS MARKED Vehicle Tyre Tube - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 4 - Type of Steering Manual Manual, Power Operated Turning Radius, Min (mm) 4300 Speed Governers No - ABS Fitted No - 2/5 Front Vehicle Brake - - Rear Vehicle Brake - - Type of Clutch - - Tipping Angle (Degree) 48 Tipper Container cap acity/Volume(cubic metres) 2.5 Certification Chassis Certification ARAI/VRDE/ICAT No. - - Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 12 - No. Of Free Service (Nos) 5 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3800 - Width of Chassis (mm) 1500 - Height of Chassis (mm) 1845 - Size Of Front Tyres (mm) - - Size Of Rear Tyres (mm) - - Size of Wheel (mm) 4 Tipper body Pivot length (mm) 1546 - Tipper body Length (mm) 2165 - Tipper Body Height (mm) 672 - Overall Height of Tipper from Ground (mm) 1491 - Body Plate Thickness (mm) 2 Main Frame Thickness (mm) 3 Pneumatic System true - Hydarulic System true - Tipping Hydraulic - - 3/5 Cylinders(Make) Hydraulic System Driven by Main Engine - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation true - Auxiliary Diesel Engine Transmission - - Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Dumping Height (mm) 354 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter true - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 4/5 1 Shital Annaji Mahajan 0, N 3 15 Required No ePBG Required No

Liquid Crystal Display LCD Panel or Monitors Liquid Crystal Display LCD Panel Or Monitors ( 19 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Technology LED Backlit LED Backlit Screen Size (Diagonal) (cm) 45.5 - 47.5 45.5-47.5 Panel Type Twisted Nematic (TN) - Resolution (Pixels) 1366 x 768 (HD) 1366 x 768 (HD), 1440 x 900, 1920 x 1080 (Full HD), 2560 x 1080 (Ultra Wide), 2560 x 1440 (WQHD), 3840 x 2160 (UHD) Aspect Ratio 16:9 16:9, 16:10, 21:9 Brightness (Nits) 300 200, 250, 300, 350 Native Contrast Ratio (Minimum) 600 : 1 - Viewing Angle (Horizontal : Vertical) (Degree) 170 : 160 - Response Time (millisecond) 5 - Antiglare Coating No - Split Screen Feature Not-Available - Inbuilt Speakers Not-Available - VGA Port Available - 1/3 HDMI Port Available - DVI-D Port Not-Available - Display Port Available - Power Consumption in Operating Mode (Maximum) (Watt) 15 - Power Consumption in Sleep Mode (Maximum) (Watt) 15 - Mounting Arrangment Wall Mount - TCO Certification TCO-07 - BIS Registration under CRS of Meity No - If yes, BIS Registration Number - - Operating Temperature Range (Degree Celsius ) 0-40 - Operating Humidity (%RH) 95 - Power Supply 230V AC, 50 Hz - Type Of Power Supply In-built - On Site OEM Warranty (Year) 3 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 PRIYANKA DAS 764059, O/O THE DISTRICT PROJECT COORDINATOR, RTE, SSA, NABARANHAPUR NABARANGAPUR 19 15 EMD Required No ePBG Required No

hopper or tipper Hopper Or Tipper ( 9 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Box body Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, - Main Engine Capacity (cc) 1034 - Make of Chassis - - Type of Chassis Frame - - Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) Fuel Consumption ( declared by OEM as 20 1/6 certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) Speed, Max (Km/Hr) 70 - Main Engine Aspiration Natural Aspiration Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 27 Gradeability of Vehicle with load( %) 10.2 - Gradeability of Vehicle without load ( %) 10.3 - Ground Clearance (mm) 185 Wheel Base (mm) 1970 - Kerb Weight (Kg) 924 Gross Vehicle Weight (Kg) 1924 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - - Type of Front Axle and Suspension System - - Type of Rear Axle and Suspension System - - Type of BIS MARKED Vehicle Tyre Radial - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 5 - Type of Steering Manual Manual, Power Operated Turning Radius, Min (mm) 7700 Speed Governers yes - ABS Fitted No - 2/6 Front Vehicle Brake - - Rear Vehicle Brake - - Type of Clutch - - Tipping Angle (Degree) 45 Tipper Container cap acity/Volume(cubic metres) 1.7 1.7, 1.8 Certification Chassis Certification ARAI/VRDE/ICAT No. - - Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 12 - No. Of Free Service (Nos) 5 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3675 - Width of Chassis (mm) 1460 - Height of Chassis (mm) 1460 - Size Of Front Tyres (mm) - - Size Of Rear Tyres (mm) - - Size of Wheel (mm) 4.82 Tipper body Pivot length (mm) 1650 - Tipper body Length (mm) 2450 - Tipper Body Height (mm) 710 - Overall Height of Tipper from Ground (mm) 1500 - Body Plate Thickness (mm) 2 Main Frame Thickness (mm) 3 Pneumatic System false - Hydarulic System true - Tipping Hydraulic - - 3/6 Cylinders(Make) Hydraulic System Driven by Power Pack Unit - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - Auxiliary Diesel Engine Transmission - - Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Dumping Height (mm) 590 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 4/6 1 Narendra Sukhlal Wasnik 444906, Jama MasJid Chowk, Warud Tq. Warud Dist. Amravati, 444906 9 15

Human Resource Outsourcing Service

waste containers or rigid liners- Dust bin or Garbage Bin or Household Bin Average Turn Over of Last 3 Years 25 Lakh (s) Experience with Gov. Required 3 Year (s) Waste Containers Or Rigid Liners- Dust Bin Or Garbage Bin Or Household Bin ( 20 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Utility Domestic Domestic, Public (Mobile containers confirming IS: 12402) ISI Marked No yes, No CM/L No (If ISI Marked Yes) (If No write NA) NA - Class confirming to IS:12402 (For Public Dustbins) NA - Material HDPE HDPE, LDPE, LLDPE, Corr osion free sheet metal, Stainless steel, Stainless Steel (with inner Plastic lining/bin) CAPACITY Bin Capacity (Volume) (Ltrs) 80 Litres As per GeM Catalogue. DIMENSIONS Wheel Dimension in (mm) (Diameter x Thickness ) (mm x mm) NO WHEEEL - 1/3 Weight of Dustbin (Complete unit) (Grams) 270 - CONSTRUCTIONAL Colour blue - Wheel Lock Without - Load carrying Capacity (Kgs) 40 - Wall Non- Perforated - Lid removable - Handle Without - Wheel Without - Wheel Material NO WHEEL - Towage Provision yes - Gripping Provision Both Frontal &Ventral - Plugged outlet for washing & draining With - UV Resistant no - Dust Bin stand without - No. of Compartments in the Bin single - CERTIFICATIONS Availability of Test Reports from Central Government/NABL/IL AC acredited Lab to prove conformity to the specifications yes - Test report number 5831 - Test report date 11/9/17 - Name and address of lab ASHISH/THANE - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Savita Raju 400034, ALL INDIA INSTITUTE OF PHYSICAL MEDICINE AND REHABILITATION K K MARG HAJI ALI PARK MAHALAXMI MUMBAI 20 15 Required No ePBG 2/3 Required No

Printer

breathing apparatus accessories or supplies re breathing bag Breathing Apparatus Accessories Or Supplies Re Breathing Bag ( 4 ) Technical Specifications Specification Specification Name Values Allowed Values Indian standard and other details Conformity to Indian Standard IS: 11364: 1994: latest Yes - Product ISI Marked false - CM/L no NA - Material Antistatic good quality rubber material grade (ISO standard) - Operating Temperature range (deg C) Fire Engulfment tested - Sizes (litres) 5 - Bag free from leakage Yes - Reusable yes - Certifications, markings and test reports details Certification available European Standard - Marking As per IS : 11364: 1994: latest - Availability of Test Report from NABL/ILAC accredited or Central Government Lab to prove conformity of products to the specification. Yes - 1/3 Test Report Date 24-06-2016 - Test Report No. 0082/2435/079/06/16/0 226 - Test reports to be furnished to buyer on demand yes - Name of the Lab Apave - Address of The Lab 191 Rue de Vaugirard, 75015 Paris, France - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Abhay Bhan 226001, Fire Service hqrs 4th & 5th floor Indira Bhawan Ashok Marg Lucknow 4 15 EMD Required No ePBG Required No

ambulances

Desktops

hopper or tipper Experience with Gov. Required 1 Year (s) Hopper Or Tipper ( 4 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, Garbage Tipper N/A Main Engine Capacity (cc) 702 Make of Chassis Garbage Tipper Type of Chassis Frame Ladder Type Frame With Inverted Hat Section Long Members Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl N/A Type of Fuel Diesel Diesel, CNG Vehicle Emission bs iv bs iv, BS-III (only for 1/7 Complaince Defence) Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 21.5 Speed, Max (Km/Hr) 60 N/A Main Engine Power BHP@rpm (BHP@rpm) 16 HP @ 3200 RPM BHP@rpm N/A Engine Torque Max, @ rpm (N- M@rpm) 39 NM @ 1800 - 2200 Main Engine Aspiration Natural Aspiration Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 30 Gradeability of Vehicle with load( %) 16.38 N/A Gradeability of Vehicle without load ( %) 18 N/A Ground Clearance (mm) 160 Wheel Base (mm) 2100 N/A Kerb Weight (Kg) 720 Gross Vehicle Weight (Kg) 1700 No of Axle (Nos) 2 N/A Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) 4X2 N/A Type of Front Axle and Suspension System Rigid Beam Axle With Parabolic Leaf Spring & 2 Nos. Double Acting Telescopic Hydraulic Shock Absorbers N/A Type of Rear Axle and Suspension System Banjo Type Live Axle With Parabolic Leaf Spring & 2 Nos. Double Acting Telescopic Hydraulic Shock Absorbers N/A 2/7 Type of BIS MARKED Vehicle Tyre Tube N/A Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 4 N/A Type of Steering Manual Manual, Power Operated Turning Radius, Min (mm) 4300 Speed Governers No N/A ABS Fitted No N/A Front Vehicle Brake Disc Brake Hydraulic, Dual Circuit Diagonal Split With Tandem Master Cylinder Acting On All Wheels With Automatic Wear Adjusters N/A Rear Vehicle Brake Drum Brake Hydraulic Type of Clutch 170mm Single Plate Dry Friction Diaphragm Type N/A Tipping Angle (Degree) 48 Tipper Container cap acity/Volume(cubic metres) 2.5 Certification Chassis Certification ARAI/VRDE/ICAT No. AAHN0151 F03 Dtd. 17-02-2017 Performance Parameters Standard Sparewheel and Tool Kit Yes N/A Warranty Time (Month) 12 N/A No. Of Free Service (Nos) 5 N/A Battery Warranty (Months) 12 N/A Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3800 N/A Width of Chassis (mm) 1500 N/A Height of Chassis (mm) 1845 N/A Size Of Front Tyres (mm) 145 R 12 - 8PR mm N/A 3/7 Size Of Rear Tyres (mm) 145 R 12 - 8PR mm N/A Size of Wheel (mm) 4 Tipper body Pivot length (mm) 1546 N/A Tipper body Length (mm) 2165 N/A Tipper Body Height (mm) 672 N/A Overall Height of Tipper from Ground (mm) 1491 N/A Body Plate Thickness (mm) 2 Main Frame Thickness (mm) 3 Pneumatic System true N/A Hydarulic System true N/A Tipping Hydraulic Cylinders(Make) Wipro/dental/Equivalen t Reputed Make/isi make N/A Hydraulic System Driven by Main Engine N/A Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation true N/A If Yes Auxiliary Diesel Power (HP@rpm) NO Auxiliary Diesel Engine Transmission NO Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 N/A Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Dumping Height (mm) 354 Engine Oil Pressure Level Indicator in true N/A 4/7 Control Panel Fuel Gauge Indicator in Control Panel true N/A Engine Cooling Liquid Temperature Indicator in Control Panel true N/A Operating Hour Meter true N/A Locking/Unlocking of Tipper Discharge Container Yes N/A Lowering/Lifting of Tipper Discharge Container Yes N/A Counter Weight false N/A If yes Counter Weight (kg) 0 N/A Paint Automotive Paint N/A * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Snehal Ramesh Panhalkar 416106, Kurundwad Municipal Council, Bazar Peth Kurundwad 4 15 EMD Required No ePBG Required No

backhoes

air purifiers Air Purifiers ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Independent certifying agency name ECARF - CADR Characteristics Whether CADR is certified by independent agency such as AHAM/JAM GB/Independent Labs false Clean air delivery rate (CADR) at maximum speed (Minimum) (Cubic metre/hr) 251 - 300 As per GeM Catalogue. Number of Stages Number of Air cleaning stages (Filtration stages) (Nos.) 3 2, 3, 4, 5, 6 or more Physical Characteristics Pre-filter true HEPA (High Efficiency Particular Arrestance) Filter true Activated carbon filter true Ionizer false Timer false 1/3 Speed mode true Auto mode true Remote Control Without With, Without * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 HARJINDER SINGH 141001, Directorate General of Revenue Intelligence, Ludhiana Zonal Unit, #213, Rani Jhansi Road, Civil Lines, Ludhiana 5 15