Loading
Loading…
Loading…
52 results • Latest
HIGH CAPACITY SIDE BUFFER ASSEMBLY WITH HIGH CAPACITY RUBBER BUFFER SPRING FOR TOWER WAGON
A SET OF CONSISTING OF 04 HARDWARE ITEM USE IN AC LOCOMOTIVE MAINTENANCE- (1)-ROUND HEAD SLOTTED SCREW M4X25 MM
RFID TAG FOR Diesel LOCOMOTIVES (WDG4,WDG4D,WDP4D,WDM3D,WDM3A)
MERCURY METAL (Hg) COMMERCIAL GRADE, REQUIRED
Blind Rivet for RFID Tags, as per Drawing; M/s Avlok Part No. HMS44-16419GG or M/
Helical Coil Spring suitable for M/s Phooltas Make, Mark-IV Tower Wagon, M/s Phooltas part no. OHE 4/03-01/00 Rev.0.
M12 connector (Male-Female) suitable for Hikvision make crew voice and video recorder system(CVVRS)
Outdoor Camera IP67 OR better for crew voice and video recording system [CVVRS] for electric locomotive
INDOOR CAMERA IP66 or better for Crew Voice and Video Recording System (CVVRS) for Electric Locomotive
Hard Disk Drive (HDD) ( 4TB Surveillance DVR Hard Drive) for Crew Voice And Video Recording System (CVVRS) for Electric Locomotive
Heavy duty Industrial use hinges size : 75 mm, thickness 2 mm Material
A set consist of supply & installation of 02 items :- (1) SS Flow Booster Range 0- 5000LPH, Pressure 0-20 kg/cm2,
Set of washable good cotton cloth cover of dark blue/maroon color duly stitched
Multipurpose heavy duty reusable washable nitrile coated work safety hand gloves size - 200 mm.
Rubber shim for HHP traction motor air duct assembly of HHP loco to BLW part No:17272336 and RDSO Spec.No: MP.0.40.99.01 (REV 02) OCT 2008.]
RC DAMPING PANEL COMPLETE FOR AUXILIARY [RC DAMPING PANEL COMPLETE
Earthen pot with tap and lid capacity 30 ltrs.
A SET OF VARIOUS POLARIZED RADIAL ELECTROLYTIC CAPACITORS, TEMPERATURE RANGE -55 TO 105 DEGREE CENTIGRADE, AS PER
A set of shim consisting of 02 items equal to 06 nos for lateral thrust pad of WDP4B and WDP4D locomotive as
3/4" Duplex Check Valve to RDSO Drg. no. SKDP-1187 Alt.1.
SET OF SPARES FOR M72 SCHEDULE OF MEDHA [SET OF SPARES FOR M72 SCHEDULE OF MEDHA MAKE MICRO
Power Supply (DC-DC converter) for HIKVISION make CVVRS. As per RDSO spec no RDSO/2015/EL/SPEC/0118 (Rev-0) and as per Specification attached.
Friction snubber arm loaded spring of size: 49mm x 35mm x6 mm having 4 active coil and 06 total coils,
Balancing Block for Clamping Arm Grade IS 2062. As per Drawing no. ET/MISC- 252.HSN Code-8431.
Supply of AC/DC HV tester 0-5 KV as per the Specification attached.
Digital vibration meter model VB-8203 of LUTRON make or Fluke: 805 Skf :CMAS 100-SL or fully equivalent
Shim for side Bearer Rubber Spring Size-460x222x2mm. As per Drawing no- SK.VL- 133
Heavy duty fresh air flow stand with exhaust fan size-18 inch, air flow 6300
Vent cap for gear case of WDG4/4D with foam to Drg. No. ET/Misc-236.]
Resilient liner of metal Aluminium having thickness 1 mm for loading shoe pad of WDM3A & WAG5 locos having
A set consisting of 5 items in 05 nos (1) Black Clamp-6 mm Qty: 01 Nos. (2) Black Clamp-8 mm
Resilient liner of metal Aluminium having thickness 2 mm for loading shoe pad of WDM3A & WAG5 locos
A Set Consist of three items in 04 Nos (1) Miniature Circuit Breakers C Curve
DC-DC CONVERTER FOR KNORR BREMSE MAKE CC
HEAT SHRINK TUBE TRANSPARENT CLEAR, SHRI
A Set Consist of three items in 05 Nos (1) Miniature Circuit Breakers C Curve MCB 16 Amp, 03 Pole As per IS/IEC 60898-1,
HEAT SHRINK TUBE TRANSPARENT CLEAR, SHRI
Digital Speed indicator input signal range 0 to 9 Volts
Digital type Speed Indicator (0-180 kmph) for HHP Loco
HEAVY DUTY FALL ARRESTER AS PER DRG. NO.-ET/MISC-301
HEAT SHRINK TUBE TRANSPARENT CLEAR,SHRIN
A set consist of 2 items (1) 32 Inch Exhaust Fan Size 800X800X400 mm Blade Thickness 1.2 mm
WDG4 OPERATING HANDLE OF CBC LOCKING PIN
Input Voltage feed back transformer as per Medha Part No. SP184151009 for Medha make
Set of starter motor OH kit suitable for HHP Diesel locomotives. Set consists of 22 itmes.
Master controller for 10 ton EOT crane sheet metal body, IP-44, Horizontal mounting position, Rated Voltage 500V, 10 Amp
Overhauling kit for Governor booster pump motor consisting of the following 05 items:
Supply, Installation and Commissioning of Hydraulic System for Pinion Mounting and extraction.
FILTER ELEMENT TO KBI PART NO-775080 FOR MAINTENANCE OF CCB-II AIR BRAKE SYSTEM of HHP Diesel Locomotives.]