DLS/JHANSI/NORTH CENTRAL RLY Tender Results

Hose connection for 700 mm (With washer at both ends) to drg.no. EMU/M-3-5-079 Alt - s/2, item no. 3. Matl & Spec. As per drg.

CLASSIFICATION LIGHT LED TYPE, DLW PT No. 18360774.

MCB

Fuel Filter ASM 40047323 specification no. Misc-336R3,Drg No.40047323, Alt-b, Dlw pt. no. 16050174

LOAD AMMETER 75mv/1000A SELF ILLUMINATED FOR 1400HP DEMU DPC CGL MATERIAL CODE-789232107 OR SIMILAR.

Spring loaded switch momentary release hand operated mushroom head non- latching push button switch without enclosure; Front dimension 40mm, cut out 22.5mm, colour Blue, as per CLW Spec. no. CLW/ES/3/0044, Embossing confirming to RDSO/2024/EL/MS/0505(Rev.0). Note- One sample got approved before effecting bulk supply of Material.

Rotary Switch(Ammeter Selector switch) for EMU application type RP/125B,16 Amps- 250V, AC/DC. Make:-SLAZER / L&T / SWITCHON / KAYCEE.

Earth fault Relay type - 9-22ER4-DT. Make - INDER or Similar, Annexure attached - J.

Supply of B Check kit for SPIC No. 260571, Engine Model NTA855R, Make- Cummins. as per attached annexure -B.

Supply of B check kit for SPIC DG set (40 KVA, CPCB IV+Emission compliant DA set), Make:- Cummins, as per attached Annexure - B/40.

Starter Motor 42 MT, 24 Volt Electric Solenoid Type for Cummins Engine NTA855R, Cummins Part No.ST 1433, Delco Remy Pt.no. 4078515, make Delco Remy or Cummins or similar for SPIC.

Supply of C check kit for SPIC No. 260571, Engine model NTA855R, Make:- Cummins as per attached annexure - C

Supply of C check kit for SPIC DG st (40 KVA, CPCB IV + Emission Compliant DA Set), Make:- Cummins, as per attached Annexure- C/40.

Micro controller based Electronic speed Indicating and Recording system for Tower wagon scale Range 0-120 kmph, voltage -24V DC. As per RDSO spec no. MP.00.3700.07 Rev 07, Aug 2017.

GASKET ELBOW TO WATER DRAIN PIPE TO EMD PT NO. 40034633 & DLW PT NO. 16171196.

Driver Control switch (DETC), Drg.no. 915929210001-GA type - 9-DCS-DTC. Make- INDER or Similar. Annexure-A attached.

Charging Alternator 24 volt, 75 Amp as per Cummins Part No. 3816939 for SPIC use, Make Cummins, Lukas (Part.no. 26021428) or equivalent.

Set of Nylon Bushes for EMU/Motor Coach consisting 09 Nos.items (In each Set,Item- 1=32 nos,Item2=16 nos,Item-4=112 nos,Item-5=24 nos,Item-6=48 nos,Item-7=112 nos,Item-8=48 nos,Item9=16 nos,Item-10=16 nos.) ICF Drg. No. EMU/M-3-2-060 ALT f/3; RDSO Spec No.WD-04-nylon bush-02.

LOWER RUBBER WASHER FOR AXLE BOX GUIDE ARRANGEMENT FOR MEMU MOTO COACH BOGIE TO ICF DRG. NO.-EMU/M-01-008 ALT-S/6 Material and specification as per drawing.

Wearing Piece for Side Bearer on Bolster Suspension to ICF Drg. No. EMU/M-0-5-010 Alt- l /3. Material and specification as per drawing.

KIT OF PINS CONSISTING OF 7 ITEMS AS PER ANNEXURE OF ICF DRG. NO. EMU/M-3- 2-065. ALT. a. MATL. & Specn. As per Drg.

Acetal Homopolymer Guide Bush for Axle box guide arrangement suitable for mainline EMU driver motor coach to ICF Drg. No.-EMU/M-0-1-023, Alt-e/Nil. Item no-2.

Pullar Flexible coupling for Alco Loco and WDS-6 Loco Material EN 8 complete machining as per drg.

Cranking Bar (Handle) Lever bearing device Drg. no. DSL/TKD/SK No. M-670.

Ball Bearing 6214 2Z /C3 Make: SKF/FAG/NTN/NBC.

DISTANCE PIPE FOR CENTRE PIVOT ARRANGEMENT TO DRG.NO. EMU/M-0-6-006, ITEM 1, ALT.- d/2 .

1/2" SPRING LOADED DRAIN VALVE COMPLETE FOR 20 LITRES AIR RESERVOIR TO M/s FTRTIL PART NO. 702010600 OR M/s ESCORTS DRG.NO. 4EB6959 ALT.01 ORM/s WABCO MAKE SUNDARAM CLYTON PART NO. M302830 OR KNORR BREMESE DRG.NO. 4B51096/KI Alt -02 CONFIRMING TO RDSO SPEC NO> C-K407 REV -04 of MRACH -23.

Suit to "MITUTOYO" Digimatic (digital) vernier caliper, ABSOLUTE Coolant proof, IP- 67, Model No. CD-P12" S, size -300mm, Material stainless steel, Battery - SR44X1 . Note:- Material to be supplied along with calibration certificate and warranty certificate by OEM. The Digital vernier caliper Quoted above will supplied with calibration certificate traceable to National standard / NPL Standard. Master are should be Calibrated by NABL approved Lab. Make:-MITUTOYO, INSIZE.

Coated Wheel Turning inserts 19mm LNUX 191940- Grade TN 2000. Make :- SANDVIK/WIDIA or EQUIVALENT.

Set of Hexagonal head screws complete for crown clearance adjustment to Drg. No. T-0-1-652, COL.1, Alt-b. ( Consisting of 08 sets and split pin size-2.5 x 20, Qty-08 Nos.) to spec IS: 549-2005, Tab-1 Galvanized to IS: 1573-86. Special condition: All the above items to be supplied in a single packing. Note:- Screw & Nut (item-2) shall be of Make- TVS or UNBRAKO/DFL or LPS only.

REVERSER KEYS as per BHEL DRG. No.-25781130006-002

Ball Bearing 6214 2Z /C3 Make: SKF/FAG/NTN/NBC.

BOLT 5/16-18 12PT as per Drg.No. 8348718 ALT Aa specno. MISC:401

WEARING PLATE FOR BOGIE BOLSTER AS PER ICF DRG NO. EMU/M-0-5-047 alt e/nil.

Set of Driver Seat cover superior quality cloth (with HD Foam of Blue Colour) Back & Bottom with lace for Diesel Loco as per DLW Part no.-11811717. Note Clothes should be approved before bulk supply.

DISPLAY ASSEMBLY FOR CONTROLLER CCB 2.0 OF KBIL BRAKE SYSTEM as per KBIL PART No. 775354.

LOAD AMMETER 75mv/1000A SELF ILLUMINATED FOR 1400HP DEMU DPC CGL MATERIAL CODE-789232107 OR SIMILAR.

Ball Bearing 6214 2Z /C3 Make: SKF/FAG/NTN/NBC.

Digital Torque wrench Tester (200-2000) NM Socket size -27mm as per specification attached. Note - 1. Calibration Test and Warranty Certificate must be supply with material by Digital Torque Tester. 2. Digital Torque Tester must be Commissioning and testing in Diesel Loco shed jhansi by firm Engineers.

'O' Ring for upper auxiliary spring retainer to DLW Drg. No. TPE-10-0001, ALT -F (Sl. no.9) and part no .10171289.

Set of Teflon seat of size 20 MM X 8 MM X 6 MM with Dome type taper (item no.1) used in J1 and J2 filterdrain cock and Auto Drain Valve of (M/s. Recon & M/s. Trident make OR SIMILAR) fitted in Diesel locos.

Portable pipe threading machine, size: 1/2 to 2 capacity, 230V/50HZ/1350W, 18/28 RPM. MAKE: INDER MODEL NO. P-141E/IMC/RIGID or Similar.

DISPLAY ASSEMBLY FOR CONTROLLER CCB 2.0 OF KBIL BRAKE SYSTEM as per KBIL PART No. 775354.

Valve Ball, Cutout cock 1-1/4 to EMD Part No. 10635243 and BLW Part No. 17451681.

Overhauling Kit for Valve Assy; 821 vent (785259) of Electric CCB system as per KBI KIT NO. XKI/KIT/01590. Set consist of 15 items as per Annexure Attached.

LED BASED FLASHER LIGHT SYSTEM, TO RDSO SPECIFICATION NO:ELRS/SPEC/LFL/0017 (REV.1,SEP-2004). SUITABLE FOR TOWER WAGON USE IN SUPPLY SYSTEM VOLTAGE OF 24 V DC, One Set consist of:- 1) Control unit as per ICF Drg. No. ICF/SK7-5-047 Alt-B. 2) Lamp unit with Hood as per ICF Drg. No. ICF/SK7-5-048 Alt-A.

Lifter for Generator and Compressor Hood fitted with Traingle Ring of 350mm Length and 22mm Thick and steel flexible Wire Rope both side Eye and double Ferrule Wire Dia 14mm and 16mm Size 6x36, Length 2875mm long with both fitted with Ring of size 275mm Dia and 22mm Thick of Material IWRC Tensile Strength 1770N/mm Square as per IS 2266 (2002) along with Test certificate and load Test certificate from Govt Approved Lab, as per drawing.

Suit to "Torque Master" Torque Multiplier 5 Factor, Capacity-2500 LB/FT (345 Kg-M) Female input-3/4"(Sq. Inch/Sq. Drive), Male Output 1-1/2" (Sq. Inch/Sq. Drive), Model No.-TM6. Note:- Calibration, Testing and Warranty certificate must be supplied along with material. Make:-Torque master / MAC master / GEDORE.

SET OF GASKETS for HHP Loco Headlight Assembly.

Lifter for super Structure Hood fitted with Ring of Dia 300mm and 32mm Thick and steel flexible Wire Rope, Wire Diea 14mm and 16mm size 6x36, Length 3750mm long with both side eye and Double Ferrule fitted with Center ring of material IWRC Tensile Strength 1770N/mm square as per IS 2266(2002) along with Test certifiate and load Test certificate from Govt Approved Lab, as per sample available in Shed.