Loading
Loading…
Loading…
Tender Value
Refer Docs
Closing Date
15 Jun 2026, 10:45 amClosed
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
30 days
Expenditure
General
LP
2 conditions
I/WE ENGAGE TO SUPPLY THE WESTERN RAILWAY WITH THE ARTICLES SPECIFIED ABOVE UPON THE TERMS OF THE INDIAN RAILWAY STANDARD CONDITIONS OF THE CONTRACT (LATEST REVISION) AND UPON THE TERMS OF THE REVISED SPECIAL CONDITIONS AND INTRUCTIONS FOR THE GUIDANCE OF THE CONTRACTS ISSUED BY THE WESTERN RAILWAY S/137/F REVISED MAY 2011 AMEND.No. 10 NOVEMBER 2017.
Past Performance Review : Past performance of bidder over the last one year shall be taken into account during bid evaluation. Specifically, if the bidder has had Purchase Orders (POs) cancelled due to non-performance or breach of contract during this period, the bid may be rejected at the discretion of the purchaser. Assessment shall be based on iMMIS records.
26 conditions
FIRM IS REQUESTED TO IMPROVE UPON DELIVERY PERIOD.
MSE : a] Please indicate whether you are registered with any of the following Micro & Small Enterprises (MSE) agencies : District industries Centres, KVIC, KVIB, Coir Board, NSIC, Diretorate of Handicraft & Handloom or any other body specified by Ministry of MSME.[Name the agency clearly] b] If you are registered with any of the above mentioned agencies, lease indicate the terminal validity date of registration and also indicate whether the Enterprise is owned by SC/ST.
In case of road delivery, the date of delivery at destination [consignee's end] shall only be treated as delivery date irrespective of F.O.R. / F.O.T. condition mentioned elsewhere in the contract / tender.
Tenderers may note that their Offered delivery schedule should clearly indicate the starting time, quarterly rate of supply and finishing time. For offers with vague delivery schedule like -02 to 12 months- or like -06 to 10 months-, DP shall be given as per the requirement best suited to this office within the quoted range.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
3 conditions
Payment Terms: No deviation from the Payment Terms stipulated in the tender is permitted.
Validity of Offer: No deviation from the offer validity period stipulated in the tender is permitted.
MODE OF DELIVERY: BY ROAD ONLY. TENDERS NOT ACCEPTING THESE TERMS ARE LIKELY TO BE PASSED OVER WITHOUT ANY FURTHER REFERENCE TO THE FIRM. TRANSIT RISK WILL BE TO CONTRACTORS ACCOUNT.
1 location across Gujarat · 20 Numbers total
Portable pipe threading machine, size: 1/2 to 2 capacity, 230V/50HZ/1350W, 18/28 RPM. MAKE: INDER MODEL NO. P-141E/IMC/RIGID or Similar.
62265073~NCR
62265073
Limited - Indigenous
Goods
Gandhinagar, Gujarat
₹0
Exempted
15 Jun 2026
29 May 2026
7 items · 20 Numbers total
Double Acting Pneumatic Cylinder with Cushioning at both ends, Bore dia :-80 mm & Stroke L ength :-600 mm. Cylinder Should withstand max Pressure up to 10 Bar. Other Specification as per Annexur e Attached. Item suitable as per model no Polymatic TGC 80 x 600 or similar in Festo, Janatics, SMC,Legris o r equivalent. [ Warranty Period: 24 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SR.SECTION ENGINEER WAGON BODY PRATAPNAGAR, WR | Gujarat | 1.00 Numbers |
| Total | 1 Numbers | |
Double Acting Pneumatic Cylinder with Cushioning at both ends, Bore dia :-80 mm & Stroke L ength :-100 mm. Cylinder Should withstand max Pressure up to 10 Bar. Other Specification as per Annexur e Attached. Item is suitable as per polymatic Model TGC 80 x 100 or similar in Festo, Janatics, SMC,Legris or equivalent. [ Warranty Period: 24 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SR.SECTION ENGINEER WAGON BODY PRATAPNAGAR, WR | Gujarat | 4.00 Numbers |
| Total | 4 Numbers | |
Double Acting Pneumatic Cylinder with Cushioning at both ends, Bore dia :-80 mm & Stroke L ength :-300 mm. Cylinder Should withstand max Pressure up to 10 Bar. Other Specification as per Annexur e Attached. Item is suitable as per Polymatic Model TGC 80 x 300 or similar in, Festo, Janatics, SMC,Legris o r equivalent. [ Warranty Period: 24 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SR.SECTION ENGINEER WAGON BODY PRATAPNAGAR, WR | Gujarat | 1.00 Numbers |
| Total | 1 Numbers | |
Double Acting Pneumatic Cylinder with Cushioning at both ends, Bore dia :-40 mm & Stroke L ength :-100 mm. Cylinder Should withstand max Pressure up to 10 Bar. Other Specification as per Annexur e Attached. Item is suitable as per Polymatic Model TGC 40 x 100 or similar in, Festo, Janatics, SMC,Legris o r equivalent. [ Warranty Period: 24 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SR.SECTION ENGINEER WAGON BODY PRATAPNAGAR, WR | Gujarat | 1.00 Numbers |
| Total | 1 Numbers | |
Double Acting Pneumatic Cylinder with Cushioning at both ends, Bore dia :-80 mm & Stroke L ength :-80 mm. Cylinder Should withstand max Pressure up to 10 Bar. Other Specification as per Annexure Attached. Item is suitable as per Polymatic Model TGC 80 x 80 or similar in , Festo, Janatics, SMC,Legris or e quivalent. [ Warranty Period: 24 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SR.SECTION ENGINEER WAGON BODY PRATAPNAGAR, WR | Gujarat | 1.00 Numbers |
| Total | 1 Numbers | |
5 Port /3 Position -Hand Lever Valve 1/4" Other Specification as per Annexure Attached. Item is suitable as per Polymatic Model TG 3521B-08C or similar in, Festo, Janatics, SMC,Legris or equivalent. [ Warranty Period: 24 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SR.SECTION ENGINEER WAGON BODY PRATAPNAGAR, WR | Gujarat | 10.00 Numbers |
| Total | 10 Numbers | |
Double Acting Pneumatic Cylinder with Cushioning at both ends, Bore dia :-125 mm & Stroke Length :-500 mm. Cylinder Should withstand max Pressure up to 10 Bar. Other Specification as per Annexu re Attached. Item is suitable as per Polymatic Model TGC 125 x 500 or similar in Festo, Janatics, SMC,Legris or equivalent. [ Warranty Period: 24 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SR.SECTION ENGINEER WAGON BODY PRATAPNAGAR, WR | Gujarat | 2.00 Numbers |
| Total | 2 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5681274.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .