East Central Railway Tenders

VNR8A163-WHEEL FLANGE MAKE EECI

Ultrasonic thickness Gauge.

Pigeon Hole Lockers.

Comprehensive Maintenance Contract of 21 nos. Kirloskar make DG sets latest and high technology of different models and capacity at different stations/locations over DNR Division for two years along with operation and maintenance of three nos. 750 kVA DG sets at CSSH, Patna for two years.

VNR8A047-BRASS NIPPLES MAKE EECI

Supply, Installation & Commissioning of Folding vertical rescue stretcher with accessories.

ORION-23 FP

Improvement of Officers Rest House Kavery, Krishna, Godawari and Sonebhawan etc. at DDU under ADEN/HQ/DDU.

SODIUM BICARBONATE 34MG + PHENOL 0.0034ML + GLYCERIN 0.34ML EAR DROP IN 5ML PHIAL

Supply, Installation and Commissioning

Set of liners for CASNUB 22HS Bogies

SODIUM CHLORIDE POWDER FOR NASAL SOLUTION 4G/200ML STARTER KIT

SODIUM BI CARBONATE 1 GM ORAL TABLET

Nozzle and electrodes.

Special tool kit for KEO type DV.

SILODOSIN 8 MG ORAL TAB/CAP

Tyre defect Gauge.

RINGERS LACTATE SOLUTION IV INJECTION 500/540 ML

Cisatracurium Besylate 2 mg/ml Inj. in vial

NINTEDANIB (AS NINTEDANIB ESILATE) 100 MG ORAL CAPSULE

RAFN with Locking Bolts with Spiral Blade with End cap

Brake head assly. for WAG-7 loco

Master controller key

Cable Assembly CRU To BVAE 1 KBI Pt no-7 [Cable Assembly CRU To BVAE 1 KBI Pt no-775300]

OIL PUMP FOR CONVERTER FOR WAP7 & WAG9

Toner Cartridges/Ink Cartridges/Consumablesfor Printers (Q2)

Line Interactive UPSwith AVR (V2) (Q2)

XLPE Cable, Working Voltage from 3.3 kV up to and including 33 kV (V2) ISI Marked to IS 7098 (Part 2) (Q2) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No

Hand Held Search Light (Q2)

S&T works (Indoor & Outdoor) with new EI in connection with Yard remodelling at Jehanabad Station having provision of Up loop line No- 1 and DN loop line No- 4 to be converted as common loop along with shunt signal in DN main line for all lines along with extension of goods line no- 2 upto 50 metre towards PNBE end at JHD station in Patna Gaya section under Danapur Division."

400 mm Cordless brushless Chain saw machine with 40-Volt 4 Ah 02 Nos battery."As per attached Technical Specification".

Rod cutter cordless 18-Volt 4 Ah, 2 Nos battery and one charger with 05 Nos rod cutter .:Attached as per Technical Specification".

Pipe cutting machine (Reciprocative Saw) with 40 Volt 04 Ah 02 Nos ."As per attached technical Specfication"

AIR SUPPLY UNIT TO FAIVELEY PART NO.FT0052441-101, MODEL NO. BURAN 10 MOTORCOMPRESSOR WITH 6 POLE AND AIR DRYER (GW 975)-AC MEMU ALONG WITH LATEST AMENDENT /ALTERATION IF ANY.

Comprehensive Annual Maintenance contract (CAMC) for Safe Load Indicator System fitted in 140 Ton BD crane at BRWD (Crane no. 142267) and DHN (Crane no.143001) for 03 years. Make- Mechanica Systems-Pune.

SET OF NYLON TUBE 6 MM OUTER

Heat Shield APL

Supply, installation & commissioning of Hydraulic press vertical, Capacity-200T as per attached specification.

Lower Spring Seat for Axle Box Guide Arrangement to ICF Drg. No. DL-0-1-103, Col.-II, Alt. No.-z/14 (Small Z)

Modification for provision of MCBs and indication lamps on board of 4.5 kW Under Slung Constant Voltage Regulated cum Emergency Battery Charger provided in LHB type AC coaches at Coaching Depot Barauni.

MPCB 4-6.3A as per M/s Schneider part no. GV2ME10 or M/s ABB make manual motor starter MS325-6.3 for pump converter of WAG9 Locomotives.

Molygraph graphite grease colour black suitable for hydraulic rams,plungers , slides elevator cable lift guides , pantograph pans , cam and cam surfaces in break control valves of locomotives and as protective for steel wire ropes and certain antiseizer purpose in temperature & moderate climates operating temp range 20 to 150 degree Celsius. Worked penetration 265-295.

Ratchet type torque wrench.

Set of modified temperature sensor block for TM type 6FRA6068 of 3-phase electric WAG9 locomotives having 4 holes at the corners with suitable hex head bolts of size M6X15 and appropriate washers (plain and spring). (Block thickness-15 mm +/- 0.1 mm).

Axle Damper for WAG-9 Loco. Specification/ Drg. No.:- CLW Spec.no.- CLW/MS/3/009 Alt-3, CLW Drg.no.- 1209-01.215-014 Alt.-2 with latest. Type-02A- 1518,ABB ID no.IB 016-00372-001.

SUPPLY OF BACK AND BOTTOM DRIVER SEAT REST IN 4" FOAM AND 3 MM M.S. SHEET IN BOTTOM AS PER DRG. M/ELS/RPM/SK-281 ALT-1, COVERED IN GOOD QUALITY FABRIC FOR WAP-7 AND WAG-9 LOCOMOTIVES.

Supply of Traction Motor dropping detection clamp for WAG-9 Locos as per ELS GMO Drawing Number - TRS/GMO/TM/3PH/044 including hardware items. i) Hex head M16 X 40 - 1 Nos. ii) M16 NUT - 1 Nos. (Grade - 8.8, Make - TVS, Unbrako, APL) or similar.

Description-PVC insulated single core multi stranded unsheathed copper cable, size 6 sq.mm.(84/0.3mm) voltage grade 1100V Conforming to RDSO'S spec.No. RDSO/PE/SPEC/TL/0027-2002(Rev.'0') with amdt.No.1 OR Latest (with insulation colour in equal Qty. RED, YELLOW & BLUE)

Head Light Lamp Type-200W PAR-56 MFL-120V for WAG-9 loco. Specification :-, CLW Spec no. CLW/ES/3/0655 Alt-A with latest

Digital INSULATION TESTER MEGGER 1000V as per attached technical specifications