Loading
Loading…
Loading…
1,225 results • Latest
Electrical/G work for: Jhansi Division: Provision of stadium high mast and associated work at Railway Hockey Stadium Gwalior.
LINK PIN FOR LHB COACHES TO RCF DRAWING NO. LW05125, ALT. b.
Appointment of Project Supervision Services (PSS) at various Construction Sites/ Sections in connection with the work of Design, Supply, Erection, Testing & Commissioning for upgradation of existing 1x25 KV Electric Traction system into 2x25 kV Electric Traction System in Mathura (Ex) - Dholpur - Antri (Ex) section of Agra & Jhansi Division of North Central Railway (195 RKM/606 TKM) between MTJ - DHO section in the jurisdiction of Electrical Traction Distribution Department of Agra Division (North Central Railway) (106 RKM-345 TKM)
CAP/TAB AMOXYCILLIN 500MG + CLAVULANIC ACID 125MG + LACTOBACILLUS (60 MILLION SPORES) PER UNIT
TAB / CAP. PREGABALIN 75 MG + METHYLCOBALAMIN 1500 MCG PER UNIT
POVIDONE IODINE MOUTH GARGLE 2% IN 100 ML SOLUTION PER UNIT
FEEDER OVER LOAD RELAYS OVER CURRENT RELAY FOR FEEDER 1&2 FITTED IN SBC OF LHB POWER CARS AS PER SPECIFICATION ATTACHED OR LATEST VERSION OF SPECIFICATION.
PRESSURE GOVERNOR (PB) as per KBI PART NO. II35830/04535. (Acceptance of material by consignee against KBI works test certificate.)
KIT OF PINS CONSISTING OF 7 ITEMS AS PER ANNEXURE OF ICF DRG. NO. EMU/M-3- 2-065. ALT. a. MATL. & Specn. As per Drg.
Brake Head for 20 T Axle Bogies to ICF Drg. No. EMU/M-3-1-001, Alt - r & Latest, Material and Spec as per Drg. (item No.-1&3 to 13)
Set of impact tools for Bogie as per annexure (i) Impact socket Cr mo steel 1/2squire drive of length 78 mm. size 15 mm, 17 mm, 18 mm, 19 mm, 24 mm, 30 mm, 32 mm, 34 mm one no each total 08 pc. (ii) Impact Extension 1/2 squire drive rod length 300 mm - 01 No (iii)Allen key socket 8 mm, 10 mm and 17 mm one each -03 Nos (iv) 3/4 squire drive impact socket length 90 mm size 30 mm, 32mm, and 34mm one each-03 Nos. Make DEE NERS or equivalent. Note :- One set sample should be approved before bulk supply.
COPPER PIPE SEAMLESS ARSENICAL ANNEALED 1/2" OD X 2.5 MM THICKNESS . BIS No. IS 2501:1995, Rev-III & IS 191:2007, (Reaffirmed Year : 2021 ) Grade DPA.
"M.S. ROUND BAR OF 16 MM DIA CONFORMING TO IS-2062:2011 (REAFFIRMED 2021), GRADE- E250-A SEMI-KILLED IN STANDARD LENGTH OF 3.6 MTRS. TO 5.5 MTRS."
SET OF UNION SOCKET AS PER CLW DRG.NO.0/3/65/8. ONE SET CONSISTING OF 05 ITEMS 05 NOS. AS PER ANNEXURE-'A':- S.N. Description Qty./Set 1. 1-1/4" socket union 01 no. 2. 1" socket union 01 no. 3. 3/4" socket union 01 no. 4. 3/8" socket union 01 no. 5. 1/4" socket union 01 no. CLW DRG.NO.0/3/65/8. Spec:
S S TUBE 12.7 MM (1/2") O/D x 0.889 MM WT X 6 Mtr Lg (Weight/mts=0.26 Kg) CAT NO.T/9/0002C C&D NO.T304/058 T331/020 T331/022 B304/031 specn: CLW/MS/3/029 ALT.-10
Set of Hardware items for TM Assembly type: 6FRA 6068 as per CLW Spec 4TMS.096.075,Rev-1,Alt-1, Set consists of 08 items as per attached.
Set of Sealing Rings for Traction Motor type 6FRA 6068-Set consist of 02 items of each 01 No as per (1)Ref.No. 2 of CLW Drg.No.4TWD.0960.030 Alt.3 and (2) Drg. No. WR/BRCY/EL/4-GK-359.
MICROPROCESSOR BASED ELECTRONIC SPEED INDICATING , RECORDING SYSTEM and 01(ONE) EVALUATION SOFTWARE FOR EVERY 10(TEN) SETS OF SPM (WITHOUT MEMORY CARD READER UNIT & COMMUNICATION CABLE FOR MASTER TO SLAVE) FOR WAG-9 / WAP-7 & WAP-5 TYPE 3-PHASE LOCOMOTIVES. as per Specn. ELRS/SPEC/ SPM/0002 (Rev.4), Make Modern Railtech equipment only.
Microprocessor based electronic speed cum Energy monitoring system (ESMON) for three phase electric locomotives as per RDSO Specification No. ELRS/SPEC/SPM/0002 (Rev.4) of July 2018 or latest, Make :- Medha Only.