Loading
Loading…
Loading…
1,228 results • Latest
RATE CONTRACT FOR SUPPLY OF PLASSAR MAKE SPARES FOR TRACK MACHINES FOR THE YEARS 2026-27 AND 2027-28 for TMD/JHANSI.
One Catering Stall (GMU-Women) at Mathura Jn. Railway station, PF-1/1A , Beside shed col. No.-03
Kit for S-Uric Acid (System Pack for fully automated chemistry analyser EM 360.) 5X44ml+5X11ml, system pack (Transasia),5X44ml+5X11ml,per unit (ITEM NO. 4298 OF AMI 2026-27)
One Catering Stall (GMU-Women) at Agra Cantt Railway station, PF-4/5 , Inbetween COP Columm 40 & water booth no-13.
One Catering Stall (GMU-Women) at Agra Cantt Railway station, P/F no-01/6, Near RO Plant.
One Catering Stall (GMU-Women) at Agra Cantt Railway station, P/F no-02/3, IN front of NDLS side of FOB Ramp.
Guide bush for axle box guide arrangement to Drg. No. EMU/M-0-1-023, alt(e).
Hose Connection for 3/8 inch bore (10 mm bore) length 500 mm SL. NO. 6 and Hose Connection for 3/8 inch bore (10 mm bore) length 3300 mm SL. NO. 12 as per Draw No. ICF/SK-3-5-517, Alt U (Both End Swiv
PUSH BUTTON FOR EMERGENCY STOP TO SPEC./DRG. NO. CLW/ES/3/0077/B.
RING GAUGE FOR PINION OF WAG-9/WAP-7 LOCOS, REFERENCE RDSO DRAWING NO. SKEL- 5043, ALT -0 (INCLUDING RING GAUGE FOR TAPER 1:50 AS PER REF 01 & RING GAUGE FOR TAPER 1:25 AS PER REF 02) NOTE: SUPPLY OF RING GAUGE WITH THE FOLLOWING ITEMS (1) PULLING EXTRACTOR FOR EASY REMOVAL OF RING GAUGE FROM SHAFT PINION (2) GAUGE (GO & NO GO) SIZE: 15.0 MM (+/0.30) WITH CALIBRATION CERTIFICATE FROM NABL ACCREDITED LAB.
S.HDL - Cholesterol Direct 160 ml, Direct Homogenous, 1 kit (160 ml) per unit
Trilevel Control 3 x 10 ml, Transasia, 3x10 ml per unit
TYPHEEDOT (PTYPHOID CARD) CARD TEST, 1X50 TEST PER CARD
ZIRCONIUM COPPER STAMPING FOR ZIRCONIUM TYPE SHAFT MOUNTED DESIGN ROTOR [SCHEME-1]
Monitoring health of ballast bed with the help of ground penetration radar technology for through ballast renewal (TBR) and formation rehabilitation on Indian Railways
COUPLER ROD WITH RIBS AND KEY WAY WELDED FOR BLCS WAGON AS PER RDSO DRAWING NO. WD15011-S-18, ALT. 3, ITEM NO.1.
"HIGH SPEED TOOL STEEL FLAT 25 X 16 MM, AS PER IS 7291-81,(Reaffirmed 2019), FIRST REVISION TO GRADE- XT72W18Cr4VI ANNEALED CONDITION ROLLED SECTION, LENGTH 1 MTR OR ABOVE."
Cast Steel Side Frame (WITH 'K' CLASS NARROW PEDESTAL JAW) FOR LWLH25 BOGIE.
Growler tester suitable for 6FRA6068 three phase Rotor, Dual magnetization yoke as per specification with standard accessories (1) Thermacol molded carry case-1 No (2) ASTM test block-1 No (3) Pie gauge- 1 No (4) Puffer bulb - 01 No (5) Dry magnetic powder water base - 1 kg.
Hose Connection 3/8 x 3000mm Long to ICF Drg.no. ICF/SK-3-5-517, Alt- U/18 or latest item no. 4.
Earth fault Relay type - 9-22ER4-DT. Make - INDER or Similar, Annexure attached - J.
Set of Hexagonal head screws complete for crown clearance adjustment to Drg. No. T-0-1-652, COL.1, Alt-b. ( Consisting of 08 sets and split pin size-2.5 x 20, Qty-08 Nos.) to spec IS: 549-2005, Tab-1 Galvanized to IS: 1573-86. Special condition: All the above items to be supplied in a single packing. Note:- Screw & Nut (item-2) shall be of Make- TVS or UNBRAKO/DFL or LPS only.
LOAD AMMETER 75mv/1000A SELF ILLUMINATED FOR 1400HP DEMU DPC CGL MATERIAL CODE-789232107 OR SIMILAR.
Suit to "MITUTOYO" Digimatic (digital) vernier caliper, ABSOLUTE Coolant proof, IP- 67, Model No. CD-P12" S, size -300mm, Material stainless steel, Battery - SR44X1 . Note:- Material to be supplied along with calibration certificate and warranty certificate by OEM. The Digital vernier caliper Quoted above will supplied with calibration certificate traceable to National standard / NPL Standard. Master are should be Calibrated by NABL approved Lab. Make:-MITUTOYO, INSIZE.