Loading
Loading…
Loading…
1,092 results • Latest
System pack Reagent kit for Cholesterol, End Point for Fully Automatic Biochemistry Analyzer BA400(PACK SIZE 600 ml)
System pack Reagent kit for rheumatoid factor (RF) for fully AUTO BIO ANALYZ BA400(PACK SIZE 1X300 ML)
One Set of Parts having - O2 Sensor-01 No. , Sampling Line(01 pack-10 pcs) & Sampling Line Filter(01 pack-10 pcs)
Comprehensive Asset Management of Traction Control System (IGBT based TCC & LCC of AC-AC TCS) of EMD Make HHP locos capital equipment rehabilitation of ABR Shed for a period of 01 years.
3 kVAR METALLIZED POLYPROPYLENE, GAS-FILLED, WAVY-CUT, THREE-PHASE, SELF- HEALING TYPE CAPACITOR RATED AT 480V, 50Hz, CAPACITOR SHOULD HAVE DISCHARGE RESISTOR AND OVERPRESSURE DISCONNECTION. 3 kVAR OF M/S EPCOS, M/S VISHAY OR ANY OTHER EQUIVALENT CAPACITOR CONFORMING TO IS:13340 WITH ISI MARKED AND HAVING PROPERTIES AS DEFINED IN TABLE-1 OF RDSO MODIFICATION SHEET NO. RDSO/PE/MS/AC/0054-2011 (REV-1). THE FIRM SHALL SUBMIT COMPLETE TYPE TEST REPORT FOR CAPACITY 3 kVAR OR HIGHER AS PER IS:13340 ALONG WITH LATEST ISI CERTIFICATION WITH PRIOR APPROVAL OF RDSO BFEORE BULK SUPPLY. Note:-THE LENGTH OF THE 3-PHASE E-BEAM CABLE CONNECTED TO THE CAPACITOR SHOULD BE AT LEAST 1 METER.
Liner Size - 100X80X3 mm thick drg no. WD - 93023-S-1, Alt -nil., item no..2 . Matl. & Spec. As perdrg.
Chloramphenical with Polymyxin B with Dexamethasone like Ocupol D eye ointment 5gms. Tube
Manpower Outsourcing Services - Fixed Remuneration - Healthcare; Physiotherapist; Graduate, Manpower Outsourcing Services - Fixed Remuneration - Healthcare; Pharmacist; Graduate, Manpower Outsourcing Services - Fixed Remuneration - Healthcare; Clinical Psychologist; Post Graduate, Manpower Outsourcing Services - Fixed Remuneration - Healthcare; Lab Tech.; Diploma
Monthly Basis Cab & Taxi Hiring Services - SUV; 2500 km x 320 hours; Local 24*7
Toner Cartridges/Ink Cartridges/Consumablesfor Printers (Q2)
Sterile Paraffin Gauze Dressings Conformingto IS16291 (Q2)
Portable Fire Extinguishers (V3) ISIMarkedto IS15683 (Q2)
Elastic Bandage Conformingto IS16111 (Q2)
Electrical work in connection with Provision of additional PF Shelter at FL (Phulera,NSG-3) KSG (Kishangarh, NSG-3) KKU (Kanakpura, NSG-5), JOB (Asalpur jobner, NSG-5), NRI (Naraina, NSG-6), BOBS (Bobas,NSG-6), HDA (Hirnoda, NSG-6), DHND (Dhinda, HG-2), DTRA (Dantra, HG-3), SALI (HG-3), TL (Tilonia, HG-3) 11 stations.
JP Div-Electrical work in c/w Raising the level of PF No. 1 & 2 from Medium Level to High Level at Jhir (JHIR), Jatwara (JW), Kanauta (KUT), Bhankri (BAK) stations, Raising the level of PF No. 1 from Medium level to High level & PF No 2 from Rail Level to High Level at Arniya (ARNA) station and provision of FOB at Jhir (JHIR) & Jatwara (JW) stations.
JP- Electrical work in connection with [1] Raising the level of PF to high level at BWL & HSI and extension of length of PF at BWL,HSI & GLNA stations .Provision of FOB at KVGM halt station, [2] Raising the level of PF to high level at PSL, MJNL , GAL & KNAR halt and extension of length of PF to 600 meters at BU ,KNAR & SRRG stations.
JP Div-Provision of Emergency Lighting at platform/passenger movement area at various stations over Jaipur division.
Electrical work in c/w provision of Distributed Electronics Interlocking at Hisar & Sri Ganganagar station over Bikaner Division.
Set of CBC gauges One set consist of 06 gauges for checking of AAR H type Centre Buffer Coupler ofLHB coaches. Gauges made of hard steel alloy or stainless steel with Hardness 45-50 HRC as per attachedspecifications (i) Contour Maintenance gauge (Knuckle profile gauge): APTA drawing/Gauge No.31000 (ii) AligningWing Limit gauge: APTA drawing/Gauge No. 32600 (iii) Contour Condemning Limit Gauge (Jaw-gap gauge) APTAdrawing/Gauge No. 34100-1 (iv) Knuckle Nose wear and stretch limit gauge: APTA drawing/Gauge No.34100-2A (v)Vertical height aligning wing pocket & Guard arm gauge (GO GAUGE-Must pass): APTA drawing/Gauge No.34101-4(vi) Vertical height condemning limit aligning wing pocket & Guard arm gauge (NO-GO GAUGE-Must not pass): APTAdrawing/Gauge No.44250-5 Note : NABL accredited calibration certificate with 24 months validity is required along with gauges.
Signalling work in Connection with JP-FL (DN)TWR work -53.180 Track km (From Km 242.4 to Km 295.8) in Jaipur Division.
Earth Fault Relay Type 9-22 ER4-DT EPR 11210630 operating coil 110 V DC material required for Tower wagon. Make:- INDER or its exact equivalent.
Set of allen keys. Set consists of 03 items as follows. (i) Set of Allen keys of size 1.5mm to 14mm. Set consists of 11 Nos. as follows. Sizes (1.5,2,2.5,3,4,5,6,8,10,12 and 14mm) of each one number per set.---- 20 sets./set. (ii) Allen keys of size 17mm- --20 Nos./set. (iii) Set of T type Allen keys in mm of size 1.5mm to 10mm. Set consists of 09 Nos. Sizes( 1.5,2,2.5,3,4,5,6,8,10mm) of each one number per set.--- 35 sets./set. Make: Taparia/Addison or equivalent.