Organization Name Tender Results

video conferencing end point full high definition for groups Average Turn Over of Last 3 Years 10 Lakh (s) Experience with Gov. Required 3 Year (s) Video Conferencing End Point Full High Definition For Groups ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Type of End Point Full High Definition Video Conferencing Point to Point upgradable Point to Point, non upgradable, Point to Point upgradable, 1+3 Multiparty Full HD End Point, 1+5 Multiparty Full HD End Point, 1+7 Multiparty Full HD End Point, 1+8 Multiparty Full HD End Point, 1+9 Multiparty Full HD End Point, 1+15 Multiparty Full HD End Point, 1+19 Multiparty Full HD End Point, 1+23 Multiparty Full HD End Point Does it require mandatory registration with MCU NA - Video Conferencing System Resolution End point based Full HD(1080p, 30) - Minimum Bandwidth Required for Specified video quality at End point/far-site end 1 - 1/7 (Mbps) The End Point is a point to point system upgradable to Multiparty Video conferencing with full high definition camera and codec for simple installation with a TV LED/LCD display suitable for specified bandwidth of IP network through RJ-45 connectivity: Yes - Type of sensor for 1920 x 1080p, in order to accept Full HD resolution video CMOS - Optical zoom 12X 3X, 4X, 5X, 10X, 12X, 20X, 30X, NA Digital zoom 12X - Field of View at zoom 72.5 - Pan range (Degree) 0 -120 - Tilt Range (Degree) 0 - 80 - Cord and Connector to be supplied Yes - System delivers Full HD video and voice & Full HD content for an overall Full HD experience at specified bandwidth Yes - Video coding support Protocol H.263, H.264AVC, H.264 SVC, H.264 High Profile - System has G-722 G-711/G-729 or equivalent nt wideband audio coding support Yes - System supports sharing of Full HD video and graphics content during the video call Yes - System has live resolution of 1920 X 1080 and deliver Full High definition video at 30fps from 2 Mbps onwards Yes - It is possible to see both the near and far Yes - 2/7 site on one Screen thus making most efficient use of a single display area System is equipped with one or more Omni directional High Definition Microphones as required to cover large conference room Yes - Number of microphone supports 4 - Number of camera support from the same OEM 3 - Number of Ethernet connection points for System supports for RJ-45, 10/100/1000 Mbps Base-T Ethernet connection 1 - System supports AES encryption video calls; System has Encryption On and Off capability Yes - Video Codec shall support 16:9 format for supporting LCD/LED display unit and PAL NTSC video standard Yes - Power supply: 230 + or - 10% volts, 50 Hz Yes - Shall come with easy to use infra-red hand held remote control with operating distance Yes - All equipment are in compliance with the requirements of ITU-T Standard related to Video Conferencing Yes - System to be IPv6 ready from day one Yes - System uses standards based protocols and the offered system is interoperable with any existing H-323 AVC/SVC based video conferencing equipment in a point to point call on the video Yes - 3/7 conferencing end point; All Hardware and Software required to make it interoperable is included in the scope of supply Minimum number of I/O ports ( 2 x DVI or 2 x HDMI or 2 x equivalent HD for Video output) 1xHDMI, 1xDP Port - Minimum number of ports (1 x HDMI or equivalent for Main Camera) 1xUSB - Minimum number of ports (1 x DVI or 1 x HDMI or USB 3 or higher for PC connectivity) Yes - Recording @1080p on the end point Yes - System is supplied complete with the following components from the same OEM : (a) Full HD Codec (b) Full High Definition Camera (c) At least one Omni Directional Microphones with suitable connectivity (d) Remote Control (e) Data sharing capability using hardware or software (f) All cables necessary for above features Yes - System is also tropicalized and report available from ILAC/NABL/Govt Lab with all add on if being supplied to buyer as per following requirement (a) Dry Heat Test : For 16 hour at a temperature of 55 degree C in accordance with IS:9000/part-3/sec tion-5/1977 (Reaffirmed 2007) (b) Cold Test : For 4 hour At a temperature of 0 degree C in accordance Yes - 4/7 with IS:9000/part-2/sec tion-4/1977 (Reaffirmed 2007) (c) Damp Heat Test : For 2 Cycles of 24 h each at a temperature of 40 degree C & 95% RH in accordance with IS:9000/part- 5/section-1/1991 (Reaffirmed 2007) After each environmental test and a recovery period of two hours, the video conferencing system has been checked for complete functional parameters, and the results found satisfactory Type Test Report from ILAC/NABL/Govt lab confirming conformance to above technical specifications - to be made available to buyer Yes - BIS Registration under CRS of Meity NA - BIS Registration Number and its Validity - - UL/CE certification Yes - if yes, UL/CE certificate Number (Furnished when demanded by buyer ) - - Operating temperature Range (Degree C) 0-50 - Operating humidity (%RH) 0-95% - Free installation and commissioning Yes - On Site OEM Warranty (Year) 1 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 ranjeet Singh Thakur 493661, Dr. Shyama Prasad Mukherjee International 2 15 5/7 Institute of Information Technology (IIIT-Naya Raipur), Plot No-07, Sector-24, Near Muktangan, Tuta, Raipur

All in one Average Turn Over of Last 3 Years 21 Lakh (s) Experience with Gov. Required 3 Year (s) All In One ( 11 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Processor Processor Make Intel * Processor Generation 6th 6th, 7th, 8th Processor Intel Core i3-6300T (3.3 GHz, 4 MB cache, 2 cores) * Chipset Chipset Intel H110 * Graphics Graphics type Integrated * Graphic Card Description INTEL HD * Storage Type of Hard disk drive SATA SATA, SSD, Fusion Hard Disk Drive Size (GB) 1000 500, 1000, 2000 (or higher) Hard disk drive speed (RPM) 5400 * RAM Type of RAM DDR4 * 1/4 RAM Size (GB) 4 4, 8, 16, 32 RAM Expandability Upto (GB) Not-Available 8, 32, Not- Available Ram speed (MHz) 2133 * Operating System Operating system Windows 10 Home Windows 10 Home, Windows 10 Professional, Linux, Mac OS Sierra, Mac OS High Sierra OS Certification Windows * Display Display Size (Inch) 19.5 18-27 Type of Display Non Touch Touch, Non Touch display resolution (Pixels) 1920 x 1080 1920 x 1080, 3200 x 1800, 1920 x 1080 with IPS Technology, Retina 4K Display (4096 x 2304) with IPS Technology, Retina 5K Display (5120 x 2880) with IPS Technology, 1600 x 900 TCO Certification Yes * Ports USB Port 2.0 (No.) 2 * USB Port 3.0 (No.) 2 * VGA Port Not-Available * HDMI Port Available * Thunderbolt Port (No.) Not-Available * Display Port Not-Available * Input Devices Keyboard Standard with USB Interface * Mouse Optical Scroll with USB Interface * Audio Integrated Stereo Sound with internal speakers & Mic. * Connectivity Wi-fi Connectivity 802.11 ac * Bluetooth Connectivity 3.0 * LAN Port Integrated Gigabit Ethernet 10/100/1000 * Certification BIS Registration under CRS of Meity Yes * BIS Registration no - * Certifications Available BEE * ROHS Compliance Yes * 2/4 Power Maximum Wattage (Watts) 230 * Power Efficiency (%) Minimum 80 * Others Webcam HD * DVD R/W Available * Optical drive Integrated * Stand Standard * On Site OEM Warranty (Year) 1 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Arbind Kumar 121001, Municipal Corporation Faridabad, BK CHOWK, NIT FARIDABAD 11 15

Professional Large Format Display

Air Conditioner

Desktops

LED Luminaire (Recessed Luminaire) LED Luminaire (Recessed Luminaire) ( 3500 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values STANDARDS Conformity to Indian Standard IS:10322/part 5/sec-2/2012 and IS 16107 (Part 2/Sec 1) : 2012 for Recess type * Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes * DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes * Luminaire Class (as per Cl. 2.1 Section 2 of IS: 10322 (Part-1) Class I * Types of LED Modules as per the IS: 16103(Part-2)/2012 Type 3 * Rating of Recess type LED Luminaire/System Wattage/Rated 18W * 1/6 Power Light Intensity(System Lumens) 80 Lm/Watt for 3000 deg K, 90 Lm/Watt for 4000 deg K, 100 Lm/Watt for 6000 deg K Yes * Color temeprature (+/- 500 K) 3000 deg K * Type of fixture (in feet) 1x1 (for 18W to 28W) 1x1 (for 3W to 16W), 1x2 (3W to 16W), 1x1 (for 18W to 28W), 1x2 (18W to 28W), 1x4 (30W to 48W), 2x2(30W to 48W) CONSTRUCTIONAL Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest (Minimum) IP20 * Mounting type Recess type * Diffuser material Acrylic * The luminaire body must be corrosion resistant epoxy powder coated/anadozing Yes * All fastners must be of nickel/chrome plated Yes * Number of electronic control gear (power supplies) 1 * Light Source SMD LED Chip as per LM 80/IS16106 * Warranty for free replacement 2 Years * ELECTRICAL EFFICIENCY MANAGEMENT Operating Voltage and frequency range 140V to 280 V at 50 Hz AC * Rated voltage 230 V AC 50 Hz * AC Power Factor ≥ 0.90 * Driver Efficiency ≥85 * Total Harmonics Distortion ( ≤ 20% (for upto 20W) (</=10% (for above 20W) Yes * The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl Yes * 2/6 8 of IS:16104:2012 lates) OPTICAL MANAGEMENT LED chip Efficacy (≥130 Lm/Watt for 6000 deg K, >/=120 Lm/Watt for 4000 deg K, >/=110 Lm/Watt for 3000 deg K) Yes * Working life for LED : (Minimum 50, 000 burning hours as per LM-80 report) Yes * Colour Rendering Index(CRI) ≥80 * Beam Angle ≥120 * Reflector type Diffuser * THERMAL MANAGEMENT Fixture/Luminaire should be die-cast aluminium CRCA/Extruded aluminium Yes * Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes * Junction temperature soldering temperature < 85 deg C * Operating temperature range -10 deg. C to +55 deg. C * Humidity Range 10 % to 95% RH * PROTECTION Short circuit Protection Yes * Over load protecton Yes * High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes * Insulation resistance between earth and current carrying part >100 M ohm * The luminaire shall be protected against surges and transients of >/=2.5 KV Yes * MARKING Manufactures Name and brand shall available on the body of the Luminaire Engraved/Embssed * 3/6 Each LED liminaire shall have the manufacturer’s name, model number, serial number, date of manufacture (month- year), and lot number as identification mark inside each unit and the outside of each packaging box Yes * The operation characteristics such as rated voltage and rated power in watts shall be marked inside each LED luminaire unit Yes * REPORTS AND CERTIFICATIONS LED Make EVERLIGHT/EDISON BRIDGELUX NATIONSTAR/SEOUL SAMSUNG/OSRAM REFOND/NICHIA CREE/LUMILEDS PHILIPS/SYSKA LUMENMAX * LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government LAB NABL/ILAC accrediated lab. Reports shall be furnish to the buyer on demand (LM-79 report shall have total lumen output, power, PF, Current in Amps, CRI & CCT etc., ) Yes * LM 80 &TM21(Ref. IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer on demand (LM-80 report shall have the Photo Biological report of the LED Chip being used in the luminaire) Yes * Availability of test Report from Central Government Lab Yes * 4/6 NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-2/2012 and IS 16107 (Part 2/Sec 1) : 2012 Seller has to furnish Type test report to the buyer on demand Yes * DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes * LED Luminaire for rcess type shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 2): 2012 as applicable on date Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Chandramani Prasad 492001, O/o Executive Engineer, (E&M) Public Works Department Sirpur Bhawan Parisar, Raipur. (C.G.) 3500 15

dc power supply Dc Power Supply ( 44 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values FUNCTIONAL Maximum Power (Watt) 120 watts * DC Current Output Rating (Ampere) 0 to 4 * DC Voltage Output Rating (Volt) 0 to 30 * Load Regulation (Voltage) ± (% of output + offset) less than 0.01 +2 (milli volt) * Load Regulation (Current) ± (% of output + offset) less than 0.05 + 1.5 mA * Line Regulation (Voltage) ± (% of output + offset) less than 0.01 + 1 mV * Line Regulation (Current) ± (% of output + offset) less than 0.05 + 0.1 mA * Over Voltage Protection Accuracy +- 0.5 + 0.5 V * Over Voltage Protection Response Time (milli less than 10 milli second * 1/3 sec) Ripple and Noise Voltage (20 Hz to 20 MHz) less than 1 mVrms less than 4 mVpp * . Ripple and Noise Current (20 Hz to 20 MHz) less than 4 milli amps rms * Readback Voltage Accuracy 0.05 + 10 mV * Readback Current Accuracy 0.15 + 5 mA * Read back Voltage Resolution (mV) 1 * Readback Current Resolution (mA) 0.1 * CONSTRUCTIONAL PC Interface USB/GPIB/RS232/LXI * Weight (gms) less than 12 kg * Warranty (Year) 1 1, 2 CERTIFICATIONS Operating Temperature (Degree C) 50 * Gperating Humidity (RH) (%) 0 * Availability of Test Reports from Central Govt/NABL approved ILAC acredited lab to prove conformity to the specification including environmental tests as under : (a) Dry Heat : For 16 hrs. at a temp. of 55 degree C in accordance with IS:900 0/part-3/section-5/1977 (reaffirmed in 2007). (b) Cold Test : For 4 hrs. at a temp. of -20 degree C in accordance with IS:9000/part-2/sec tion-4/1977 (reaffirmed in 2007). (c) Damp Heat (Cyclic)Test : For 2 Cycles of 24 h each at a temp. of 40 degree C & 95% RH in accordance with IS:900 0/part-5/section-1 1991 (reaffirmed in 2007). After environmental conditioning sequence Yes * 2/3 as above and a recovery period of two hours, the instrument shall be checked for complete functional parameters, which should be with in limits.(Test reports are to be furnished when demanded by buyer) Test Report No. RLLPC/Test/SGPX887 * Test Report Date 3/2/2018 * Name and address of the Lab Shreeg LED Raipur Chhattisgarh * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Chandramani Prasad 492001, O/o Executive Engineer, (E&M) Public Works Department Sirpur Bhawan Parisar, Raipur. (C.G.) 44 15

computer workstation Average Turn Over of Last 3 Years 2 Lakh (s) Experience with Gov. Required 4 Year (s) Computer Workstation ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values TYPE Form Factor Desktop Mobile, Desktop, AIO PROCESSOR Processor Make Intel Intel Number of Processors 1 1, 2 (or higher) Processor Generation 7th * Processor Configuration Intel Xeon E3-1225 v5 (4 Core, 3.3 GHz, 8 MB L3 Cache, 80 Watt) * CHIPSET Chipset Intel C236 * Number of PCI Slots 0 * Number of PCIe Slots Gen 3 (x 1, x 4, x 8, X16) (Number) 4 * NumbAer of PCIe Slots Gen 3 (x 16) 1 * GRAPHICS Type of Graphics Integrated Discrete, Integrated 1/4 Graphic Card NA * MEMORY RAM DDR4 DDR4 Operating Frequency 2400 * RAM Type Non ECC * RAM Size (GB) 16 4-3000 RAM Expandibilty (GB) 64 32-3000 STORAGE Type of Hard Disk Drive - I SATA Any applicable text(s) Size of Hard Disk Drive - I (GB) 1000 Any applicable text(s) No of Hard Disk Drives-I 1 1, 2, 3, 0 (or higher) Type of Hard Disk Drive - II SATA Any applicable text(s) Size of Hard Disk Drive - II (GB) 0 Any applicable text(s) No of Hard Disk Drive -II 1 1, 0 (or higher) OPERATING SYSTEM Operating System Windows 10 Professional OEM * OS Certifications Win 10, 7 and Linux * APPLICATION & CERTIFICATIONS Safety Certifications YES * ROHS Compliance Yes * TCO Compliance (for Monitors) TCO-07 * Applications YES * Applications Certification from OEM manufacturing Workstation YES * BIS Registration Yes * BIS Registration Number under CRS of Meity - * CONNECTIVITY Networking Interface Integrated Gigabit 10/100/1000 * Wi-Fi Connectivity NA * PORTS VGA Port 0 * HDMI Port 0 * Display Port 2 * Mini Display Port 0 * 2/4 USB C with Thunderbolt Not-Available * Number of USB 2 Ports 4 * No. of USB 3.0 Port (No.) 6 * DISPLAY Display (antiglare, LED-backlit) Monitor Integrated, Monitor Display Type Non- Touch Touch, Non- Touch Display Size (cm) 60 35-82 Panel Type IPS * Display Resolution (Full HD or better) (Pixel) 1920x1080 Any applicable text(s) POWER Maximum Power (Watt) 280 * Power Efficiency Minimum 80% * Power Management Unit - * OTHERS Keyboard Standard Keyboard * Mouse Optical Scroll Mouse * Optical Drive DVD-RW * No. of DIMM Slots (No.) 4 * No. of Internal Bays (No.) 2 * No. of External Bays (No.) 1 * Security NA * Availability of Bundled Softwares NA * On Site OEM Warranty (Year) 3 1, 5 (or higher) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mohan Lokhande 442605, Chamorshi Road 1 15

Online UPS

LED Luminaire (For Road and Street Lights) LED Luminaire (For Road And Street Lights) ( 20 ) Technical Specifications Specification Specification Name Values Allowed Values STANDARDS LED Luminaire conformity to IS:10322/Part 5/Section 3/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest Yes - Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes - Types of LED Luminaire as per the IS: 16107(Part-2 Sec.-1)/2012 Type B - Types of LED Modules as per the IS:IS: 16103(Part-2)/2012 Type 3 - LED Rating (in Watts)/System Wattage/Rated Power 45W 45W Luminaire System Efficacy (Lumen/watt) >/= 100 Lm/Watt - Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest IP66 - 1/7 Warranty for free replacement (in years) 2 2 ELECTRICAL EFFICIENCY Input operating Voltage range and frequency 90 to 300 Volts AC at 50 Hz+/-2 - Automatic Higher Cut off voltage above 300 volt Yes - Rated voltage 230 V AC 50 Hz - AC Power Factor at full load ≥ 0.95 - Driver Efficiency (in %age) Upto 100W: ≥85%, Above 100W: >/=90% Yes - Total Harmonics Distortion ≤ 10 - "The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl. 8 of IS:16104:2012 lates)" Yes - OPTICAL LED chip Efficacy ≥130 Lm/Watt - Colour temperature 6000+/-500K - Working life for LED (Minimum 50, 000 burning hours as per LM-80 and LM 21 reports) Yes - Colour Rendering Index(CRI) ≥70 - LED Beam Angle ≥120 - Optic lense materal (UV stabilised) Poly carbonate lense - THERMAL MANAGEMENT Heat sink should be die- cast aluminium along with sufficient heat sink fins to dissipate heat effectively Yes - Junctiojn/Soldering point temperature shall not exceed 85 deg.c as per LM 80 report Yes - Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes - 2/7 Operating temperature range -10 deg C to +50 deg C -20 deg. C to +50 deg. C, 10 deg C to +50 deg C, 10 deg C to +55 deg C Operating Humidity Range 10 % to 95% RH - PROTECTION Short circuit Protection Yes - Over load protecton Yes - Over Voltage protection Yes - Reverse polarity Yes - High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes - Insulation resistance between earth and current carrying part >100 M Ohm - The luminaire shall be protected against surges and transients ( Internal) >/=4KV - The luminaire shall be protected against surges and transients of >/=10KV (External) Yes - CONSTRUCTIONAL The Luminaires casing/housing (single piece housing) shall be pressure die casted aluminium alloy with higher thermal conductivity Yes - The luminaire body must be corrosion resistant powder coated Yes - All fastners must be of stainless steel Yes - Protection of the entire housing (both LED section and driver section) as per IS:10322 (Part 1):1982 latest IP66 - Extruded silicon loop gasket shall be provided in the lantern body to ensure a weather proof seal Yes - 3/7 between the UV Glass cover and the metal housing to exclude the entry of the dust, water, insects etc., Luminaries light transparency should be of Toughened glass Yes - Toughned transparent glass cover thickness >/=4 mm - Toughned Glass shall not get discoloured shall not suffer degration due to heat and ageing within warranty period Yes - Number of electronic control gear (power supplies) 1 No. 1 No., 2 Nos., 3 Nos., 4 Nos. Light Source SMD LED Chip as per LM 80/IS16106 - Driver components shall be industrial grade or above Yes - PCB shall be FR4 grade minimum 0.8 to 1.0 mm thick or more Yes - The Luminaires works on single phase three wires system (Phase, Neutral and Earth) Yes - Suitable connector shall be provided for LED connection between driver output and LED Yes - Length of ISI marked three core wire (shall be provided along with supply of material) 50 cm 50 cm, 100 cm MARKING "Manufactures Name and and brand on the aluminium die cast body " Engraved/Embossed - Manufacturer’s name, model number, serial number Yes - Date of manufacture (month-year), and lot Yes - 4/7 number as identification mark inside each unit and the outside of each packaging box The operation characteristics voltage and power be marked inside of each LED luminaire unit Yes - Diameter of pole Luminiare suitable for: (upto 45W Pole OD: shall be 40mm), (>45W<120W Pole OD: Shall be 50 mm), (above 120W: OD shall be 60 mm for which luminiare is suitable Yes - REPORTS AND CERTIFICATIONS LED Make OSRAM/NICHIA/CREE SAMSUNG/SEOUL LUMILEDS/PHILIPS SYSKA/LUMENMAX EVERLIGHT/EDISON BRIDGELUX NATIONSTAR/REFOND - System must have EMI/EMC compliance as applicable (Test reports shall be furnish to the buyer/consignee on demand) Yes - LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-79 report shall have total lumen output, power, PF, Current in Amps, CRI & CCT etc., ) Yes - LM 80 & TM 21 (Ref. IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer Yes - 5/7 consignee on demand (LM-80 report shall have the Pohoto Biological report of the LED Chip being used in the luminaire) Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-3/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes - Seller shall furnish the Type test reports to the buyer/consignee on demand Yes - DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes - LED Luminaire for road and street lighting shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 3): 2012 as applicable on date Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mukesh Shukla 492001, O/o Executive Engineer, (E&M) Public Works Department Sirpur Bhawan Parisar, Raipur. (C.G.) 20 15

SPECTROPHOTOMETER ( PAC Only ) Average Turn Over of Last 3 Years 12 Lakh (s) Experience with Gov. Required 5 Year (s) SPECTROPHOTOMETER ( 1 ) ( Under PAC ) Make biorad Model bio-rad(168-1130)imark Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values TYPE Type of Spectrophotometer UV - VISIBLE UV - VISIBLE, VISIBLE, UV - VISIBLE - IR Type of Optical System Split Beam Single Beam, Split Beam, Double Beam Monochromator Type NA Reflexive Grating, Holographic Grating, Czerny-turner, NA Detector Type Photodiode Photo Multiplier Tube (PMT), Photodiode, CMOS, Diode array Spectral Bandwidth Type Fixed Bandwidth Fixed Bandwidth, Variable Bandwidth LIGHT SOURCE Light Source Tungsten Halogen Lamp Halogen Lamp, Deuterium Lamp, LED, Tungsten Halogen 1/5 Lamp, Xenon Flash Diffraction Grating (lines/mm) 600 600, 800, 1000, 1200, 1400, 1600, 1800 Switching of Light Source Automatic Automatic, Mannual Wavelength Setting And Scanning Automatic Automatic, Mannual OPTICAL PERFORMANCE Source Wavelength - Minimum 340 175, 180, 185, 190, 195, 200, 320, 340 Source Wavelength - Maximum 760 * (or higher) Resolution 2 0.002, 0.3, 0.5, 1, 1.25, 1.5, 1.7, 2 Wavelength Accuracy (+/-) 0.8 0.1, 0.8, 2, 2.5 Bandwidth (nm) 0 to 5.0 0.1, 0.2, 1.8, 2.0, 4.0, 5.0, 0 to 5.0 If variable band width, Specify the incremental step value(mm) NA * Scanning Speed (nm/min) 1000 * Focal length (mm) 50 to 99 0 to 49, 50 to 99, 100 to 149, 150 to 199, 200 to 249, 250 to 299, 300 and above Photometric measurement modes Absorbance Transmittance, Absorbance, Concentration (Wavelength, time), Reflectance, Energy, Polarisation Photometric Absorbance (Max) (Abs) (+/-) 0.27 0.2-8 Photometric Absorbance Accuracy (Max) (+/-) 0.35 0.001-0.5 Photometric Transmittance (Max) (+/-) 90 Any applicable numeric value Photometric Transmittance Accuracy (Max) (+/-) 0.35 Any applicable numeric value Photometric Reflectance (Max) (+/-) 86 Any applicable numeric value Photometric 0.35 * 2/5 Reflectance Accuracy (Max) (+/-) Stray Light Correction Automatic * Baseline Correction Automatic * GENERIC Display In-built display In-built display, Through PC Display type LCD with Backlight LCD with Backlight, LCD touchscreen, TFT, NA Display Size 2.5 Any applicable numeric value Test result printing Through inbuilt Printer Through inbuilt Printer, Through external printer If inbuilt printer, Type of printer Thermal printer Thermal printer, Dot matrix, Laser b/w, Inkjet b/w, Color laser, Color inkjet, N/A Suitable software for connecting PC & Printer Yes * Connectivity USB, RS 232 * Internal storage(GB) 8 Any applicable numeric value Sample switching/selection Manual * Capacity of Sample holder/Sample Carousel 1 * Mximum Path Length of sample 93 Any applicable numeric value Number of Cuvettes supplied 10 10, 25, 50, 100, 300, 400, 500 Power Supply 230 V ± 10, 50 Hz * Spares and Consumables inclusive in the scope of supply false true, false List of Items and Quantity of each item included in the offer - * OPERATING CONDITIONS Minimum Operating Temperature 10 -5, 10, 0, 5, 10 Maximum Operating Temperature 35 35, 40, 45, 55, 60 Operating Humidity (RH) (%) at 40 degree C 85 80, 85, 90, 95 3/5 WARRANTY Onsite Warranty 2 1, 3, 4, 5 Availability of Spares (at extra cost) 10 2, 6, 7, 8, 10 Certification Availability of UL/CE Certification as per EN 61010-1:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use General requirements Yes Yes, No Conformance to EMC/EMI as per EN 61326-1:2013 Electrical equipment for measurement, control and laboratory use Yes Yes, No Availability of Test Reports from Central Govt/NABL approved/ILAC acredited lab to prove conformity to the specification No Yes, No If yes test report to furnished, to the buyer on demand N/A * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vijay Kumar 135001, O/o Civil Surgeon 1 15

LED Luminaire (For Road and Street Lights), LED Luminaire LED Luminaire (For Road And Street Lights) ( 30 ) Technical Specifications Specification Specification Name Values Allowed Values STANDARDS LED Luminaire conformity to IS:10322/Part 5/Section 3/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest Yes - Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes - Types of LED Luminaire as per the IS: 16107(Part-2 Sec.-1)/2012 Type B - Types of LED Modules as per the IS:IS: 16103(Part-2)/2012 Type 3 - LED Rating (in Watts)/System Wattage/Rated Power 45W As per GeM Catalogue. Luminaire System Efficacy (Lumen/watt) >/= 100 Lm/Watt - Ingress Protection (IP Rating) as per IS:10322 IP66 - 1/18 (Part 1):1982 latest Warranty for free replacement (in years) 2 2, 3, 4, 5 ELECTRICAL EFFICIENCY Input operating Voltage range and frequency 90 to 300 Volts AC at 50 Hz+/-2 - Automatic Higher Cut off voltage above 300 volt Yes - Rated voltage 230 V AC 50 Hz - AC Power Factor at full load ≥ 0.95 - Driver Efficiency (in %age) Upto 100W: ≥85%, Above 100W: >/=90% Yes - Total Harmonics Distortion ≤ 10 - "The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl. 8 of IS:16104:2012 lates)" Yes - OPTICAL LED chip Efficacy ≥130 Lm/Watt - Colour temperature 6000+/-500K - Working life for LED (Minimum 50, 000 burning hours as per LM-80 and LM 21 reports) Yes - Colour Rendering Index(CRI) ≥70 - LED Beam Angle ≥120 - Optic lense materal (UV stabilised) Poly carbonate lense - THERMAL MANAGEMENT Heat sink should be die- cast aluminium along with sufficient heat sink fins to dissipate heat effectively Yes - Junctiojn/Soldering point temperature shall not exceed 85 deg.c as per LM 80 report Yes - Capacitor shall be rated for a temperature of Yes - 2/18 105 deg. celsius or better Operating temperature range -10 deg C to +55 deg C -20 deg. C to +50 deg. C, 10 deg C to +50 deg C, 10 deg C to +55 deg C Operating Humidity Range 10 % to 95% RH - PROTECTION Short circuit Protection Yes - Over load protecton Yes - Over Voltage protection Yes - Reverse polarity Yes - High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes - Insulation resistance between earth and current carrying part >100 M Ohm - The luminaire shall be protected against surges and transients ( Internal) >/=4KV - The luminaire shall be protected against surges and transients of >/=10KV (External) No - CONSTRUCTIONAL The Luminaires casing/housing (single piece housing) shall be pressure die casted aluminium alloy with higher thermal conductivity Yes - The luminaire body must be corrosion resistant powder coated Yes - All fastners must be of stainless steel Yes - Protection of the entire housing (both LED section and driver section) as per IS:10322 (Part 1):1982 latest IP66 - Extruded silicon loop gasket shall be Yes - 3/18 provided in the lantern body to ensure a weather proof seal between the UV Glass cover and the metal housing to exclude the entry of the dust, water, insects etc., Luminaries light transparency should be of Toughened glass Yes - Toughned transparent glass cover thickness >/=4 mm - Toughned Glass shall not get discoloured shall not suffer degration due to heat and ageing within warranty period Yes - Number of electronic control gear (power supplies) 1 No. 1 No., 2 Nos., 3 Nos., 4 Nos. Light Source SMD LED Chip as per LM 80/IS16106 - Driver components shall be industrial grade or above Yes - PCB shall be FR4 grade minimum 0.8 to 1.0 mm thick or more Yes - The Luminaires works on single phase three wires system (Phase, Neutral and Earth) Yes - Suitable connector shall be provided for LED connection between driver output and LED Yes - Length of ISI marked three core wire (shall be provided along with supply of material) 50 cm 50 cm, 100 cm MARKING "Manufactures Name and and brand on the aluminium die cast body " Engraved/Embossed - Manufacturer’s name, model number, serial number Yes - 4/18 Date of manufacture (month-year), and lot number as identification mark inside each unit and the outside of each packaging box Yes - The operation characteristics voltage and power be marked inside of each LED luminaire unit Yes - Diameter of pole Luminiare suitable for: (upto 45W Pole OD: shall be 40mm), (>45W<120W Pole OD: Shall be 50 mm), (above 120W: OD shall be 60 mm for which luminiare is suitable Yes - REPORTS AND CERTIFICATIONS LED Make OSRAM/NICHIA/CREE SAMSUNG/SEOUL LUMILEDS/PHILIPS SYSKA/LUMENMAX EVERLIGHT/EDISON BRIDGELUX NATIONSTAR/REFOND - System must have EMI/EMC compliance as applicable (Test reports shall be furnish to the buyer/consignee on demand) Yes - LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-79 report shall have total lumen output, power, PF, Current in Amps, CRI & CCT etc., ) Yes - LM 80 & TM 21 (Ref. IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab NABL/ILAC accrediated Yes - 5/18 lab. Reports shall be furnish to the buyer consignee on demand (LM-80 report shall have the Pohoto Biological report of the LED Chip being used in the luminaire) Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-3/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes - Seller shall furnish the Type test reports to the buyer/consignee on demand Yes - DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes - LED Luminaire for road and street lighting shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 3): 2012 as applicable on date Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mukesh Shukla 492001, O/o Executive Engineer, (E&M) Public Works Department Sirpur Bhawan Parisar, Raipur. (C.G.) 30 15 LED Luminaire (For Road And Street Lights) ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values STANDARDS LED Luminaire Yes - 6/18 conformity to IS:10322/Part 5/Section 3/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes - Types of LED Luminaire as per the IS: 16107(Part-2 Sec.-1)/2012 Type B - Types of LED Modules as per the IS:IS: 16103(Part-2)/2012 Type 3 - LED Rating (in Watts)/System Wattage/Rated Power 36W As per GeM Catalogue. Luminaire System Efficacy (Lumen/watt) >/= 100 Lm/Watt - Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest IP66 - Warranty for free replacement (in years) 5 2, Above 100W: >/=90% Yes - Total Harmonics Distortion ≤ 10 - "The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl. 8 of IS:16104:2012 lates)" Yes - 7/18 OPTICAL LED chip Efficacy ≥130 Lm/Watt - Colour temperature 6000+/-500K - Working life for LED (Minimum 50, 000 burning hours as per LM-80 and LM 21 reports) Yes - Colour Rendering Index(CRI) ≥70 - LED Beam Angle ≥120 - Optic lense materal (UV stabilised) Poly carbonate lense - THERMAL MANAGEMENT Heat sink should be die- cast aluminium along with sufficient heat sink fins to dissipate heat effectively Yes - Junctiojn/Soldering point temperature shall not exceed 85 deg.c as per LM 80 report Yes - Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes - Operating temperature range -10 deg C to +55 deg C -20 deg. C to +50 deg. C, 10 deg C to +55 deg C Operating Humidity Range 10 % to 95% RH - PROTECTION Short circuit Protection Yes - Over load protecton Yes - Over Voltage protection Yes - Reverse polarity Yes - High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes - Insulation resistance between earth and current carrying part >100 M Ohm - The luminaire shall be protected against surges and transients ( Internal) >/=4KV - 8/18 The luminaire shall be protected against surges and transients of >/=10KV (External) No - CONSTRUCTIONAL The Luminaires casing/housing (single piece housing) shall be pressure die casted aluminium alloy with higher thermal conductivity Yes - The luminaire body must be corrosion resistant powder coated Yes - All fastners must be of stainless steel Yes - Protection of the entire housing (both LED section and driver section) as per IS:10322 (Part 1):1982 latest IP66 - Extruded silicon loop gasket shall be provided in the lantern body to ensure a weather proof seal between the UV Glass cover and the metal housing to exclude the entry of the dust, Yes - Luminaries light transparency should be of Toughened glass Yes - Toughned transparent glass cover thickness >/=4 mm - Toughned Glass shall not get discoloured shall not suffer degration due to heat and ageing within warranty period Yes - Number of electronic control gear (power supplies) 1 No. 1 No., 4 Nos. Light Source SMD LED Chip as per LM 80/IS16106 - Driver components shall be industrial Yes - 9/18 grade or above PCB shall be FR4 grade minimum 0.8 to 1.0 mm thick or more Yes - The Luminaires works on single phase three wires system (Phase, serial number Yes - Date of manufacture (month-year), (above 120W: OD shall be 60 mm for which luminiare is suitable Yes - REPORTS AND CERTIFICATIONS LED Make OSRAM/NICHIA/CREE SAMSUNG/SEOUL LUMILEDS/PHILIPS SYSKA/LUMENMAX EVERLIGHT/EDISON BRIDGELUX - 10/18 NATIONSTAR/REFOND System must have EMI/EMC compliance as applicable (Test reports shall be furnish to the buyer/consignee on demand) Yes - LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-79 report shall have total lumen output, ) Yes - LM 80 & TM 21 (Ref. IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-80 report shall have the Pohoto Biological report of the LED Chip being used in the luminaire) Yes - Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-3/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes - Seller shall furnish the Type test reports to the buyer/consignee on demand Yes - DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes - 11/18 LED Luminaire for road and street lighting shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 3): 2012 as applicable on date Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mukesh Shukla 492001, Raipur. (C.G.) 5 15 LED Luminaire (For Road And Street Lights) ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values STANDARDS LED Luminaire conformity to IS:10322/Part 5/Section 3/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest Yes - Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes - Types of LED Luminaire as per the IS: 16107(Part-2 Sec.-1)/2012 Type B - Types of LED Modules as per the IS:IS: 16103(Part-2)/2012 Type 3 - LED Rating (in Watts)/System Wattage/Rated Power 70W As per GeM Catalogue. Luminaire System Efficacy (Lumen/watt) >/= 100 Lm/Watt - Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest IP66 - 12/18 Warranty for free replacement (in years) 2 2, 000 burning hours as per LM-80 and LM 21 reports) Yes - Colour Rendering Index(CRI) ≥70 - LED Beam Angle ≥120 - Optic lense materal (UV stabilised) Poly carbonate lense - THERMAL MANAGEMENT Heat sink should be die- cast aluminium along with sufficient heat sink fins to dissipate heat effectively Yes - Junctiojn/Soldering point temperature shall not exceed 85 deg.c as per LM 80 report Yes - Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes - 13/18 Operating temperature range -10 deg C to +55 deg C -20 deg. C to +50 deg. C, 10 deg C to +55 deg C Operating Humidity Range 10 % to 95% RH - PROTECTION Short circuit Protection Yes - Over load protecton Yes - Over Voltage protection Yes - Reverse polarity Yes - High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes - Insulation resistance between earth and current carrying part >100 M Ohm - The luminaire shall be protected against surges and transients ( Internal) >/=4KV - The luminaire shall be protected against surges and transients of >/=10KV (External) No - CONSTRUCTIONAL The Luminaires casing/housing (single piece housing) shall be pressure die casted aluminium alloy with higher thermal conductivity Yes - The luminaire body must be corrosion resistant powder coated Yes - All fastners must be of stainless steel Yes - Protection of the entire housing (both LED section and driver section) as per IS:10322 (Part 1):1982 latest IP66 - Extruded silicon loop gasket shall be provided in the lantern body to ensure a weather proof seal Yes - 14/18 between the UV Glass cover and the metal housing to exclude the entry of the dust, and lot Yes - 15/18 number as identification mark inside each unit and the outside of each packaging box The operation characteristics voltage and power be marked inside of each LED luminaire unit Yes - Diameter of pole Luminiare suitable for: (upto 45W Pole OD: shall be 40mm), ) Yes - LM 80 & TM 21 (Ref. IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer Yes - 16/18 consignee on demand (LM-80 report shall have the Pohoto Biological report of the LED Chip being used in the luminaire) Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-3/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes - Seller shall furnish the Type test reports to the buyer/consignee on demand Yes - DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes - LED Luminaire for road and street lighting shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 3): 2012 as applicable on date Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mukesh Shukla 492001, Raipur. (C.G.) 5 15

lead acid battery Average Turn Over of Last 3 Years 2 Lakh (s) Experience with Gov. Required 10 Year (s) Lead Acid Battery ( 11 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Types of Lead Acid of Battery Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments, Statinary Lead-Acid Batteries (with tubular positive plates) in Monobloc Container conforming to IS:13369/1992, Statio nary cells and Batteries, Lead Acid Type (With Tubular Positive Plates) conforming to IS:1651/1991, Stationar y Valve Regulated Lead Acid Batteries conforming to IS:15549 2005, Lead-Acid Storage Batteries for Motor Vehicles with Light weight and High Cranking Performance 1/3 conforming to IS:14257 1995, Lead-Acid Storage Batteries for Motor Vehicles conforming to IS:7372/1995 Nominal Voltage of Battery (volts) 12.0 Volt 12.0 Volt Material of container Polypropylene Hard Rubber, Fibre Reinforced Plastics (FR P), Polypropylene, ABS Rated Capacity at C20 discharge (AH) 65 65 Warranty (Years) 2 Years 2 Years Battery Condition Dry Uncharged - CONSTRUCTIONAL Dimensions (L x W x H) (mm x mm x mm) As per relevant IS Specifications - Volume of Electrolyte (ml) AS PER OEM - Weight of Dry Battery (Kg) shall be as per relevant IS: Specn., corresponding Ah Yes. - No.of cells per Battery (No.) 6 Cells for 12 Volt battery - CERTIFICATIONS Availability of Test Reports from Central Govt./NABL/ILAC accrediated Lab showing conformity to the specifications Yes - Address of the Lab Dr. VSI Estate, Thiruvanmiyur, Chennai – 600 046 - Name of the Lab ETDC-STQC (Govt. of India), Test Report No. ETDC (CN)/2008/30646 (Part 1 of 2) - Test Report Date 23.03.2009 - Compulsory Registration (CRS) of BIS for safety as per IS 16046 as applicable. Secondary Cells and (Batteries containing Alkaline or other non- acid Electrolytes-Safety Requirements for Portable sealed YES - 2/3 secondary cells, and for Batteries made from them for use in portable applications * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Subhash Solanki 342603, THE JODHPUR CENTRAL COOPERATIVE BANK LTD BHOPALGARH BRANCH PANCHYAT SAMITI ROAD OPPOSITE JAT TETA HOSTEL BHOPALGARH 8094002904 11 15

LED Luminaire (For Road and Street Lights), LED Luminaire (For Road and Street Lights) LED Luminaire (For Road And Street Lights) ( 20 ) Technical Specifications Specification Specification Name Values Allowed Values STANDARDS LED Luminaire conformity to IS:10322/Part 5/Section 3/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest Yes - Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes - Types of LED Luminaire as per the IS: 16107(Part-2 Sec.-1)/2012 Type B - Types of LED Modules as per the IS:IS: 16103(Part-2)/2012 Type 3 - LED Rating (in Watts)/System Wattage/Rated Power 45W 45W Luminaire System Efficacy (Lumen/watt) >/= 100 Lm/Watt - Ingress Protection (IP Rating) as per IS:10322 IP66 - 1/12 (Part 1):1982 latest Warranty for free replacement (in years) 2 2, 3, 4, 5 ELECTRICAL EFFICIENCY Input operating Voltage range and frequency 140 to 270 V olts AC at 50 Hz+/-2 with auto cutt off at below 120V - Automatic Higher Cut off voltage above 300 volt Yes - Rated voltage 230 V AC 50 Hz - AC Power Factor at full load ≥ 0.95 - Driver Efficiency (in %age) Upto 100W: ≥85%, Above 100W: >/=90% Yes - Total Harmonics Distortion ≤ 10 - "The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl. 8 of IS:16104:2012 lates)" Yes - OPTICAL LED chip Efficacy ≥130 Lm/Watt - Colour temperature 6000+/-500K - Working life for LED (Minimum 50, 000 burning hours as per LM-80 and LM 21 reports) Yes - Colour Rendering Index(CRI) ≥70 - LED Beam Angle ≥120 - Optic lense materal (UV stabilised) Poly carbonate lense - THERMAL MANAGEMENT Heat sink should be die- cast aluminium along with sufficient heat sink fins to dissipate heat effectively Yes - Junctiojn/Soldering point temperature shall not exceed 85 deg.c as per LM 80 report Yes - Capacitor shall be rated Yes - 2/12 for a temperature of 105 deg. celsius or better Operating temperature range -20 deg. C to +50 deg. C -20 deg. C to +50 deg. C, 10 deg C to +50 deg C, 10 deg C to +55 deg C Operating Humidity Range 10 % to 95% RH - PROTECTION Short circuit Protection Yes - Over load protecton Yes - Over Voltage protection Yes - Reverse polarity Yes - High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes - Insulation resistance between earth and current carrying part >100 M Ohm - The luminaire shall be protected against surges and transients ( Internal) >/=4KV - The luminaire shall be protected against surges and transients of >/=10KV (External) No - CONSTRUCTIONAL The Luminaires casing/housing (single piece housing) shall be pressure die casted aluminium alloy with higher thermal conductivity Yes - The luminaire body must be corrosion resistant powder coated Yes - All fastners must be of stainless steel Yes - Protection of the entire housing (both LED section and driver section) as per IS:10322 (Part 1):1982 latest IP66 - Extruded silicon loop Yes - 3/12 gasket shall be provided in the lantern body to ensure a weather proof seal between the UV Glass cover and the metal housing to exclude the entry of the dust, water, insects etc., Luminaries light transparency should be of Toughened glass Yes - Toughned transparent glass cover thickness >/=4 mm - Toughned Glass shall not get discoloured shall not suffer degration due to heat and ageing within warranty period Yes - Number of electronic control gear (power supplies) 1 No. 1 No., 2 Nos., 3 Nos., 4 Nos. Light Source SMD LED Chip as per LM 80/IS16106 - Driver components shall be industrial grade or above Yes - PCB shall be FR4 grade minimum 0.8 to 1.0 mm thick or more Yes - The Luminaires works on single phase three wires system (Phase, Neutral and Earth) Yes - Suitable connector shall be provided for LED connection between driver output and LED Yes - Length of ISI marked three core wire (shall be provided along with supply of material) 50 cm 50 cm, 100 cm MARKING "Manufactures Name and and brand on the aluminium die cast body " Engraved/Embossed - Manufacturer’s name, model number, serial Yes - 4/12 number Date of manufacture (month-year), and lot number as identification mark inside each unit and the outside of each packaging box Yes - The operation characteristics voltage and power be marked inside of each LED luminaire unit Yes - Diameter of pole Luminiare suitable for: (upto 45W Pole OD: shall be 40mm), (>45W<120W Pole OD: Shall be 50 mm), (above 120W: OD shall be 60 mm for which luminiare is suitable Yes - REPORTS AND CERTIFICATIONS LED Make Other than OSRAM NICHIA/CREE SAMSUNG/SEOUL LUMILEDS/PHILIPS SYSKA/LUMENMAX EVERLIGHT/EDISON BRIDGELUX NATIONSTAR/REFOND - System must have EMI/EMC compliance as applicable (Test reports shall be furnish to the buyer/consignee on demand) Yes - LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-79 report shall have total lumen output, power, PF, Current in Amps, CRI & CCT etc., ) Yes - LM 80 & TM 21 (Ref. IS:16105:2012) Report and Photo biological report for LED report from Central Yes - 5/12 Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-80 report shall have the Pohoto Biological report of the LED Chip being used in the luminaire) Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-3/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes - Seller shall furnish the Type test reports to the buyer/consignee on demand Yes - DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes - LED Luminaire for road and street lighting shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 3): 2012 as applicable on date Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mukesh Shukla 492001, O/o Executive Engineer, (E&M) Public Works Department Sirpur Bhawan Parisar, Raipur. (C.G.) 20 15 LED Luminaire (For Road And Street Lights) ( 20 ) Technical Specifications Specification Specification Name Values Allowed Values 6/12 STANDARDS LED Luminaire conformity to IS:10322/Part 5/Section 3/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest Yes - Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes - Types of LED Luminaire as per the IS: 16107(Part-2 Sec.-1)/2012 Type B - Types of LED Modules as per the IS:IS: 16103(Part-2)/2012 Type 3 - LED Rating (in Watts)/System Wattage/Rated Power 120W 120W Luminaire System Efficacy (Lumen/watt) >/= 100 Lm/Watt - Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest IP66 - Warranty for free replacement (in years) 2 2, 5 ELECTRICAL EFFICIENCY Input operating Voltage range and frequency 90 to 300 Volts AC at 50 Hz+/-2 - Automatic Higher Cut off voltage above 300 volt Yes - Rated voltage 230 V AC 50 Hz - AC Power Factor at full load ≥ 0.95 - Driver Efficiency (in %age) Upto 100W: ≥85%, Above 100W: >/=90% Yes - Total Harmonics Distortion ≤ 10 - "The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl. 8 of IS:16104:2012 lates)" Yes - 7/12 OPTICAL LED chip Efficacy ≥130 Lm/Watt - Colour temperature 6000+/-500K - Working life for LED (Minimum 50, 000 burning hours as per LM-80 and LM 21 reports) Yes - Colour Rendering Index(CRI) ≥70 - LED Beam Angle ≥120 - Optic lense materal (UV stabilised) Poly carbonate lense - THERMAL MANAGEMENT Heat sink should be die- cast aluminium along with sufficient heat sink fins to dissipate heat effectively Yes - Junctiojn/Soldering point temperature shall not exceed 85 deg.c as per LM 80 report Yes - Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes - Operating temperature range -10 deg C to +50 deg C -20 deg. C to +50 deg. C, 10 deg C to +55 deg C Operating Humidity Range 10 % to 95% RH - PROTECTION Short circuit Protection Yes - Over load protecton Yes - Over Voltage protection Yes - Reverse polarity Yes - High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes - Insulation resistance between earth and current carrying part >100 M Ohm - The luminaire shall be protected against surges and transients ( Internal) >/=4KV - 8/12 The luminaire shall be protected against surges and transients of >/=10KV (External) Yes - CONSTRUCTIONAL The Luminaires casing/housing (single piece housing) shall be pressure die casted aluminium alloy with higher thermal conductivity Yes - The luminaire body must be corrosion resistant powder coated Yes - All fastners must be of stainless steel Yes - Protection of the entire housing (both LED section and driver section) as per IS:10322 (Part 1):1982 latest IP66 - Extruded silicon loop gasket shall be provided in the lantern body to ensure a weather proof seal between the UV Glass cover and the metal housing to exclude the entry of the dust, Yes - Luminaries light transparency should be of Toughened glass Yes - Toughned transparent glass cover thickness >/=4 mm - Toughned Glass shall not get discoloured shall not suffer degration due to heat and ageing within warranty period Yes - Number of electronic control gear (power supplies) 1 No. 1 No., 4 Nos. Light Source SMD LED Chip as per LM 80/IS16106 - Driver components shall be industrial Yes - 9/12 grade or above PCB shall be FR4 grade minimum 0.8 to 1.0 mm thick or more Yes - The Luminaires works on single phase three wires system (Phase, serial number Yes - Date of manufacture (month-year), (above 120W: OD shall be 60 mm for which luminiare is suitable Yes - REPORTS AND CERTIFICATIONS LED Make OSRAM/NICHIA/CREE SAMSUNG/SEOUL LUMILEDS/PHILIPS SYSKA/LUMENMAX EVERLIGHT/EDISON BRIDGELUX - 10/12 NATIONSTAR/REFOND System must have EMI/EMC compliance as applicable (Test reports shall be furnish to the buyer/consignee on demand) Yes - LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-79 report shall have total lumen output, ) Yes - LM 80 & TM 21 (Ref. IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-80 report shall have the Pohoto Biological report of the LED Chip being used in the luminaire) Yes - Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-3/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes - Seller shall furnish the Type test reports to the buyer/consignee on demand Yes - DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes - 11/12 LED Luminaire for road and street lighting shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 3): 2012 as applicable on date Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mukesh Shukla 492001, Raipur. (C.G.) 20 15

Multimedia Projectors

plastic moulded chair Plastic Moulded Chair ( 190 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values GENERIC TYPE OF CHAIR SINGLE PIECE PLASTIC MOULDED SINGLE PIECE PLASTIC MOULDED, PLASTIC MOULDED SEAT CUM BACK WITH SUPPORT STRUCTURE, SEPERATE PLASTIC MOULDED SEAT AND BACK FITTED ON SUPPORT STRUCTURE Seat cushion Without With, Without Back Cushion Without With, Without Conformity to Indian Standard IS 13713- Latest false * Plastic Material FILLED THERMOPLASTIC FILLED THERMOPLASTIC, UNFILLED THERMOPLASTIC, FILLED THERMOSETTING PLASTIC, UNFILLED THERMOSETTING PLASTIC, 1/3 POLYPROPELENE, PVC (Polyvinyl Chloride), ABS PLASTIC (Acylonitrile Butadiene Styrene) ARMS Without arms With arms, Without arms DIMENSION & WEIGHT Seat Width in mm (+/- 5 mm) 345 * Seat Depth in mm (+/- 5 mm) 340 * Chair Height in mm (+/- 10 mm) 500 * Chair Dimensions Not Conforming To IS 3663 Latest * Weight of Chair (IN Grams) 750 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 40 40, 45, 50, 55, 60, 65, 70, 75, No Cushion Density of PU Foam in KG per CuM 40 40, No Cushion Thickness of Polyurethane Foam Used in Backrest in mm (+/- 2 mm) 40 40, No cushion PERFORMANCE Stability of the Chair Conforming To IS 5416 (Part 2) * Strength of the Chair Conforming To IS 5416 (Part 1) * Maximum Ash Content is Not more than 1% in Conformity test as per Annex D of IS: 14887 (Latest) Complied that Ash content is less than 1% * UV Resistance Test - % of Tensile strength retention after 192 hours exposure as per ASTM D2562 -99 Table 1- Cycle Number 2 is more than 50 % Complied Minimum 50% tensile strength retained after exposure as per test * Support/Under Structure Support/Under Structure Sigle Moulded Piece No Support Structure SS 202 STRUCTURE, SS 304 STRUCTURE, Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum, Sigle 2/3 Moulded Piece No Support Structure Support Structure Finishing Powder coated Stove enameled Paint, Powder coated, chrome, epoxy polyester, synthetic enamel, Natural Steel Finish, Sigle Moulded Piece No Support Structure CERTIFICATION Test reports to be furnished to buyer on demand YES * MISC Colour Brown, Blue, RED, Black * WARANTEE PERIOD WARANTEE PERIOD IN NUMBER OF YEARS 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajvir Singh 335804, Govt. college suratgarh 190 15

wheelbarrows

chairs-office

revolving chair Revolving Chair ( 15 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt * Tilt Tension Adjustment true * Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest with lumber support of polypropylene at multilevel across back backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black * Ergonomic Seat Design true true, false Back type fixed push back, 1/5 height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of two pcs injection moulded frame * backrest has separate adjustable headrest true true, false Seat type fixed fixed, sliding Seat is curved false * Locking mechanism true * Type of locking N.A * Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support N.A integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 2/5 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material pu foam bonded chrome coted steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU foam covered with mesh fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 40 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) NA * Material of Fabric Back Cover N.A mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover N.A foam laminated mesh fabrics, Mesh Fabrics, N.A GSM/Thickness of fabric ±5%(Gram/Square N.A * 3/5 meter) DIMENSION Overall Chair Height ±15mm 1025 * Backrest Height ±15mm 800 * Backrest Width ±10mm 520 * Seat Height ±15 mm 480 420, 450, 480, 500, 520 Seat Width ±10 mm 440 440, 520, 550, 460, 360 Seat Depth ±10 mm 400 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 0.2 * Thickness of Plywood used in Seat ±1(mm) N.A 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) N.A 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 620 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) N.A * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) N.A * WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered YES YES, NO 4/5 product is ISO 18001:2007 certified Green guard certification YES YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajvir Singh 335804, Govt. college suratgarh 15 15

e cart for garbage E Cart For Garbage ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of E Cart Fully Electric, Battery Operated Motor Driven for Carrying Bins Fully Electric, Battery Operated Motor Driven for Carrying Bins Model Number of E- Cart - - Colour of E Cart - - The E Cart Must Fabricated From Good Quality Steel properly Painted to avoid Rusting for more than 5 Years, YES YES Name and Grade of Steel from which E Cart Body Framed - - Kerb Weight of E- Cart (kg) 717 Garbage Carrying Capacity (kg) 380 Run Distance (for a Full Charge of Battery, to be tested with full load at maximum AIS-040 )) (km) 75 1/5 Number of Bins 4 Capacity of Individual Bins in litres (Ltrs) 250 Type of Chassis for E cart - - Ground Clearance as per IS : 9435 (mm) 187 Wheel Base (mm) 2060 Turning Radius (mm) 3000 Power Transmission from Motor Shaft to Wheels Direct Mounting Direct Mounting, Chain, Sprocket Type, Other Mechanical Mechanisms Please Specify the Mechanical Mechanism otherwise Put NA - - Type of Battery as per AIS-048 Lead Acid, EV Grade, Tubular Deep Discharge Lead Acid, Tubular Deep Discharge Capacity of the Battery approved by ICAT/ARAI (Ah) 100 Battery Voltage, Nominal (Volts) 48V 48V, 60 V Maximum Overall Dimensions of the Battery ( L x Wx H ) (mm3) - - Nominal Filled Weight of the Battery (kg) 30.67 Motor Controller ( Must Suitable for starting, accelerating, decelerating, driving, and stopping of E Cart - - Battery Charger 220/230 V Nominal Input Voltage, High Efficiency Type 220/230 V Nominal Input Voltage, High Efficiency Type Charging Current (A) 15 Type of Motor Brushless DC Motor Brushless DC Motor Motor Output Power, 48V/60V at Full Load (watt) 923 Overall Efficiency of the E Cart ( to be tested at Full Load 80 2/5 with maximum speed as per Concerned AIS standards (%) Gradeability of E- cart, ( to be tested at full procedure as per AIS -003 Load (Degree) 80 Certification Vehicle Certification ICAT ARAI, VRDE, ICAT, OTHERS If Vehicle Certification from Others Agency, Name of the Agency otherwise put NA ICAT - Vehicle Certification Number and Date CANB0117 (09MAY2018) - Constructional Seating Facility For Driver only For Driver only Length of E -cart as per Gazette Notification by Ministry of Road and Transport Oct, 2014 (meters) 2.7 Width of E -Cart as per Gazette Notification by Ministry of Road and Transport Oct, 2014 (meters) 0.96 Height of E -Cart as per Gazette Notification by Ministry of Road and Transport Oct, 2014 (meters) 1.7 Dimensions of the cabin Provided for Bins (mm x mm x mm) (mm3) 975x600X1300 - Size of Front Tyre (mm) - - Size of Rear Tyre - - Brake Type (Front) - - Brake Type ( Rear ) - - Suspension System (Front) - - Suspension System ( Rear ) - - Reverse Gear Yes Yes 3/5 Facility The Mounting of Batteries Yes Yes Vehicle lighting System Filament Type Filament Type, LCD Based, LED Based Instrument Panel Containing Speedometer and Battery Charging Indicator Yes Yes Glass Windshield with wiper motor as approved by ICAT/ARAI false true, false Battery Make as per AIS :048:2009 Others Okaya, Exide, ceil, Amaron, Others If others please specify the Name of Brand, Otherwise put NA (as per AIS048 2009) - - Equipped with Start and Stop Button, parking Lights, Back lights with Reverse Gear Facility Yes Yes Equipped with Fire Extinguisher true true, false Equipped with First Aid Box true true, false Yellow Color reflective tape on Front and Rear Side of the E Cart Yes Yes E Cart Integration, Yes Yes Performance Parameters Speed of the E- Rickshaw as per CMVR -2014 with latest amndmt (to be tested with Full Load ) (kmph) 23 Battery Warranty 1 1, 2, 3 No. Of Free Service 3 1, 3, 4, 5 Complaince of Centre of Gravity of E Cart as a Compulsory Norms for Safety Yes Yes Confirming to Applicable Yes Yes 4/5 Environmental Test Noise level must be Low during Operation Yes Yes * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Khulesh Kumar Sahu 490023, Bhilai Municipal Corporation Near GE Road Supela Bhilai 490023 2 30

Multimedia Projectors

All in one Average Turn Over of Last 3 Years 20 Lakh (s) Experience with Gov. Required 5 Year (s) All In One ( 12 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Processor Processor Make Intel * Processor Generation 7th 7th Processor Intel Core i5-7500T (2.7 GHz, 6 MB Cache, 4 Cores) Intel Core i5-7500T (2.7 GHz, 4 Cores) Chipset Chipset Intel H110 * Graphics Graphics type Integrated * Graphic Card Description INTEL HD GRAPHICS * Storage Type of Hard disk drive SATA SATA, SSD, Fusion Hard Disk Drive Size (GB) 1000 1000 (or higher) Hard disk drive speed (RPM) 7200 * RAM Type of RAM DDR4 * 1/3 RAM Size (GB) 4 4 RAM Expandability Upto (GB) 32 8, 16, 32, Not- Available Ram speed (MHz) 2400 * Operating System Operating system Windows 10 Professional Windows 10 Professional OS Certification Windows * Display Display Size (Inch) 20 20 Type of Display Non Touch Non Touch display resolution (Pixels) 1600 x 900 1920 x 1080, 3200 x 1800, 1920 x 1080 with IPS Technology, Retina 4K Display (4096 x 2304) with IPS Technology, Retina 5K Display (5120 x 2880) with IPS Technology, 1600 x 900 TCO Certification Yes * Ports USB Port 2.0 (No.) 2 * USB Port 3.0 (No.) 4 * VGA Port Not-Available * HDMI Port Not-Available * Thunderbolt Port (No.) Not-Available * Display Port Available * Input Devices Keyboard Standard with USB Interface * Mouse Optical Scroll with USB Interface * Audio Integrated Stereo Sound with internal speakers & Mic. * Connectivity Wi-fi Connectivity 802.11 ac * Bluetooth Connectivity 4.0 or higher * LAN Port Integrated Gigabit Ethernet 10/100/1000 * Certification BIS Registration under CRS of Meity Yes * BIS Registration no - * Certifications Available Energy Star * ROHS Compliance Yes * Power Maximum Wattage (Watts) 90 * 2/3 Power Efficiency (%) Minimum 80 * Others Webcam Full HD * DVD R/W Available * Optical drive Integrated * Stand Standard * On Site OEM Warranty (Year) 3 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Satish Chand Singhal 303303, GUPTESHWAR ROAD, DAUSA 12 15

virtualisation cloud software Average Turn Over of Last 3 Years 100 Lakh (s) Experience with Gov. Required 3 Year (s) Virtualisation Cloud Software ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values BASIC INFORMATION OF VIRTUALISATION & CLOUD SOFTWARE (GOLDEN) Software Domain Type Server Desktop, Server, Storage, Network, Application, Cloud Name of Software vmware vsphere 6 enterprise plus for 1 processor 96 GB Up to 50 Lice with 3 yrs production support - Name of the OEM vmware - OEM Model/Part No VS6-EPL-C - Software Version/Name Enterprise - FEATURES AND FUNCTIONALITY PARAMETERS(GOLDEN) Licensing Type Perpetual Subscription, Perpetual OEM Licensing policy Per physical CPU Per physical CPU, Per CPU Core Direct OEM support for 24x7 for 365 days with unlimited incident including the unlimited upgrades and updates true true, false 1/9 Installation and demonstration included false true, false No of days Training Provided at Site (for maximum batch of 10) 0 0, upto to 5, 6 to 10, 11 to 20, 21 to 30 Number of Years upto which Support is available from OEM/Franchise online 3 1, 2, 3, 5 FEATURES AND FUNCTIONALITY PARAMETERS FOR SERVER TYPE VIRTUALISATION Number of Virtual machines with virtual processors can be created for all guest operating system supported by the hypervisor 128 8, 16, 32, 64, 128, 256, 512 Virtual TB RAM Capacity in virtual machines can be created for all guest operating system supported by the hypervisor 4 1, 4, 8, 32 Virtualisation directly on the bare metal server hardware with no dependence on a general purpose OS true - Capability of all virtual machines running on the servers to migrate another physical server in case of one server failure true - Capability of adding resources to virtual machines when needed true - Comprehensive, universal API support across all cloud platforms enabling full management of all system objects through the API false - Option to recover multiple sites into a single shared recovery site false - Capability for Site false - 2/9 Recovery, Ensures VM availability (in another location) in the event of a site-wide outage The Hypervisor guest drivers to be included in Windows Updates, like simplifies/automates driver installation and upgrades false - Capability to integrate Hypervisor Introspection via Direct Inspect APIs, protects virtual environments from malware, antivirus, root kit exploits and zero day attacks false - Capability to support Workload Balancing, monitors resources and enables VM redistribution across hosts within a pool to optimize resource utilization false - FEATURES AND FUNCTIONALITY PARAMETERS FOR NETWORK TYPE VIRTUALISATION Logical Switching - Reproduce the L2 and L3 switching functionality in a virtual environment, decoupled from underlying hardware false - Logical Routing - Routing between logical switches, providing dynamic routing within different virtual networks false - Logical Firewall - Distributed firewall, kernel enabled line rate performance, virtualization and identity aware, with activity monitoring false - Logical Load Balancer - Solution should provide a server load balancer with features like SSL offload false - 3/9 Logical VPN - The solution should provide L2VPN, SSLVPN, site-to- site IPSEC VPN services false - Support for Software Defined Networking and auto provisioning of networks false - FEATURES AND FUNCTIONALITY PARAMETERS FOR CLOUD TYPE VIRTUALISATION Policy-based orchestration with API support false - Capabilities to provide infrastructure orchestration false - Ability to orchestrate third-party integrations via APIs to simplify the use of complementary IT service management tools and products false - Ability to orchestrate third-party Load balancing, Firewall via API false - Ability to orchestrate third-party Monitoring and alerting tools via API false - Ability to orchestrate third-party ITSM/EMS tool via API false - Ability for workflows to include financial, business, and architectural approvals false - Capabilities around Configuration and Change Management workflows false - Provision for automated with model- based orchestration of compute, applications and custom services through a unified multi- tenant IT service catalog false - Provision for authorized administrators, developers and false - 4/9 manage specific cloud and IT resources FEATURES AND FUNCTIONALITY PARAMETERS FOR STORAGE TYPE VIRTUALISATION Capabilities for Software defined Storage false - Capable to pools together server- attached flash devices and hard disks to provide shared datastore false - Combine storage capacity available with servers and allow the combined storage to use as Storage Area Network false - FEATURES AND FUNCTIONALITY PARAMETERS FOR DESKTOP & APPLICATION VIRTUALIZATION Capability to deliver Desktops and Applications as a Service false - Capability to deliver virtualized or hosted desktops and applications through a single platform to end users false - Desktops and applications that can be securely delivered and accessed through the digital workspace false - Capability to deliver application and desktop virtualization platform on premises, off premised or hybrid false - Capability to have advanced desktop management false - Capability to provide anytime, anywhere access, secure access to desktops and applications false - Capability to support printing from direct attached printers, network printers & shared printers false - Capability to support all windows as well as false - 5/9 Linux based applications and desktops Ability to restrict access to applications and desktops if the endpoint is not recognized by the organization false - Capability to integrate security which is able to watch guest memory in real time, detecting malware as it executes inside the VM false - Capability to encrypt end to end traffic from end user to network to controller/broker false - FEATURES AND FUNCTIONALITY PARAMETERS (GENERIC) In-built backup and recovery for virtual machines false - Support for provisioning per customer VPC/cloud provider account false - Centralized management with web- based interface capabilities false - Capability of performance monitoring for Physical Host and Virtual Machine monitoring of CPU - Capablities of analytics, reporting and to identify over- provisioned resources false - Capability to provide deep visibility into resource consumption trends false - Allow administrators to optimize VM density and identify capacity shortfalls before they affect end users false - Provide integrated smart alerts for health, performance and capacity degradation to false - 6/9 identify building performance problems before they affect end users Provide real-time, integrated dashboards of performance and capacity to enable a proactive management approach false - Product capable to create and manage recovery plans directly from Virtualization Manager Console false - Product capable to provide option to customize the shutdown of low- priority virtual machines at the failover site to get more resources or proper utilization of resources false - Ability to automatically stop replication between sites and promotion of replicated storage for recovery false - Ability to support the extension of recovery plans with custom scripts and also able to Control access to recovery plans with role-based access control false - Ability to receive automatic alerts about possible site failure false - Ability to initiate recovery plan execution from virtualization manager with a single click false - Ability to automate failback to original production site using original recovery plan false - Inbuilt server virtualization component so that false - 7/9 server and desktop/end devices work seamlessly Capability to collect and analyze network flows in real time and put them in the context of the virtual machines and applications false - Capability to provide comprehensive flow assessment and analytics to provide firewall rules suggestion for implementing a zero trust architecture false - SUPPORTED HARDWARE REQUIREMENT PARAMETERS Minimum Hard Disk Space requirements 1 TB - Minimum RAM Size requirements 4 GB - Server Type X86 - CPU requirements X86 - Operating Systems supported (Driver), if any NA - Supported Web browsers NA - GENERIC PARAMETERS OF VIRTUALISATION & CLOUD SOFTWARE Maximum user handling capability NA - Concurrent user handling capability NA - Valid Licence copy to be provided YES - Software supplied through URL Link - List of items included in the package License - Hyper link to Data sheet www.vmware.com - No of Software Licenses sold 100.0 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 8/9 1 Harish Chandra Gupta 226010, Updesco, 2nd Floor, Uptron Building, Near Gomti Barrage, Gomti Nagar, 10 15

hopper or tipper Average Turn Over of Last 3 Years 24 Lakh (s) Experience with Gov. Required 10 Year (s) Hopper Or Tipper ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, * Main Engine Capacity (cc) 720 * Make of Chassis - * Type of Chassis Frame - * Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl * 1/6 Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 70 Any applicable numeric value Speed, Max (Km/Hr) 70 * Main Engine Aspiration Turbocharged Intercooled Natural Aspiration, Turbocharged, Supercharged, Turbocharged+ Supercharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Any applicable numeric value Fuel Tank Capacity (Ltrs) 30 Any applicable numeric value Gradeability of Vehicle with load( %) 12 * Gradeability of Vehicle without load ( %) 21 * Ground Clearance (mm) 2200 Any applicable numeric value Wheel Base (mm) 2100 * Kerb Weight (Kg) 840 Any applicable numeric value Gross Vehicle Weight (Kg) 1550 Any applicable numeric value No of Axle (Nos) 2 * Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - * Type of Front Axle and Suspension System - * Type of Rear Axle and Suspension System - * Type of BIS MARKED Vehicle Tyre Radial * Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 5 * 2/6 Type of Steering Manual Manual, Power Operated Turning Radius, Min (mm) 8.6 Any applicable numeric value Speed Governers yes * ABS Fitted No * Front Vehicle Brake - * Rear Vehicle Brake - * Type of Clutch - * Tipping Angle (Degree) 70 45-9999999 Tipper Container cap acity/Volume(cubic metres) 1.8 0.5-10.5 Certification Chassis Certification ARAI/VRDE/ICAT No. - * Performance Parameters Standard Sparewheel and Tool Kit Yes * Warranty Time (Month) 12 * No. Of Free Service (Nos) 3 * Battery Warranty (Months) 12 * Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3800 * Width of Chassis (mm) 1500 * Height of Chassis (mm) 1845 * Size Of Front Tyres (mm) - * Size Of Rear Tyres (mm) - * Size of Wheel (mm) 155 Any applicable numeric value Tipper body Pivot length (mm) 2475 * Tipper body Length (mm) 2500 * Tipper Body Height (mm) 1550 * Overall Height of Tipper from Ground (mm) 2041 * 3/6 Body Plate Thickness (mm) 1.6 1.5-9999999 Main Frame Thickness (mm) 3 Any applicable numeric value Pneumatic System false * Hydarulic System true * Tipping Hydraulic Cylinders(Make) - * Hydraulic System Driven by Main Engine * Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false * Auxiliary Diesel Engine Transmission - * Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 Any applicable numeric value No. of Cylinders in Auxiliary Diesel Engine 0 * Tipper Container Material Mild Steel Mild Steel, Stainless Steel, Aluminium, Chromium Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 1.6 Any applicable numeric value Dumping Height (mm) 1400 Any applicable numeric value Engine Oil Pressure Level Indicator in Control Panel true * Fuel Gauge Indicator in Control Panel true * Engine Cooling Liquid Temperature Indicator in Control Panel true * Operating Hour Meter false * Locking/Unlocking of Tipper Discharge Container Yes * Lowering/Lifting of Tipper Discharge Container Yes * Counter Weight true * If yes Counter Weight 850 * 4/6 (kg) Paint Automotive Paint * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pawan Kumar Gupta 301606, NAGAR PALIKA KHEDLI 1 30

operating system software Average Turn Over of Last 3 Years 17 Lakh (s) Experience with Gov. Required 3 Year (s) Operating System Software ( 2 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values BASIC INFORMATION OF OPERATING SYSTEM SOFTWARE(GOLDEN) Software Domain Type Proprietary Item Proprietary Item Name of Software WinSvrDCcore 2016 Sngl Olp 2lic C Corelic 16 Core 8 Licenses * Name of the OEM Microsoft corporation India Pvt Ltd. * OEM Model/Part No. 9EA-00127 * Product Id of OEM 9EA-00127 * Software Version/Version Name WinSvrDCcore 2016 Sngl Olp 2lic C Corelic 16 Core 8 Licenses * Date of Launch of Version 2016 * FEATURES AND FUNCTIONALITY PARAMETERS(GOLDEN) Type of Operating System Server (Network) Operating System Desktop/Laptop Personal Computers Work-Station Operating 1/4 System, Mobile Devices/Tablet Computers Operating System, Server (Network) Operating System, Mainframe Operating System, Super Computer Operating System, Web server Operating System Tasking multi-tasking OS single tasking OS, multi-tasking OS Users Single User Single User, Multi User Distributed Operating System false true, false Resource Access Control true true, false If Yes, details of Access Control CAL * Installation and Demonstration false true, false Supports Virtualization true true, false No. of days Training Provided at Site (DAYS) 0 0, UPTO 5, 6 TO 10, 11 to 20 Number of Years upto which Support(Warranty) is available from OEM Franchise online (YEARS) 1 1, 2, 3, 5 FEATURES AND FUNCTIONALITY PARAMETERS(GENERIC) Real-time Operating System true * Library Operating System true * Graphical User Interface (GUI) true * Supported File Systems Disk file systems * Kernel Type Micro Kernel * Package Management false * Bit-type (BITS) 64 * Native APIs true * Non-Native APIs supported through subsytems false * 2/4 Subsystem Isolation Mechanisms false * High availability extension true * Integrated Firewall true * If Yes, details of Firewall DEFENDER * Encrypted File System true * SUPPORTED HARDWARE REQUIREMENT PARAMETERS Hard Disk Space required (GB) 1024 * RAM Size required 16 * CPU Required 1 * Operating Systems supported (Driver) WINDOWS * Supported Devices computer peripherals * Supported Web browsers ALL WINDOWS COMPATIBLE BROWSER * Supported Database SQL * Number of Devices Managed DEPENDS ON NUMBER OF CAL'S * GENERIC PARAMETERS OF OPERATING SYSTEM SOFTWARE Free Upgradation to Higher Version YES * Maximum user handling capability UNLIMITED * Concurrent user handling capability UNLIMITED * Valid Licence copy to be provided YES * Software supplied through URL Link * List of items included in the package 0 * Hyper link to Data sheet WWW.MICROSOFT.COM * No of Software sold 1000 * Number of User Referance no. 1 with in Government Department email, phone no.Of concerned authority where Software/Appliance installed 1 * Details of Government Department email, PWD * 3/4 phone no.Of concerned authority where Software/Appliance installed for above. * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Virendra Kumar Maurya 226010, Updesco, 2nd Floor, Uptron Building, Near Gomti Barrage, Gomti Nagar, 2 15

Desktops

Multifunction Machines

Microscopes - Pathological and Research Microscopes - Pathological And Research ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values CONFORMITY/TYPE EYE PIECE - OBJECTIVE DETAILS Microscope Type Research Trinocular - Non-Hinged type -with built-in light and with light intensity regulator pathological monocular hinged type without built in light and without light intensity regulator, pathological monocular non hinged type with built in light and with light intensity regulator, pathological binocular non hinged type with built in light and with light intensity regulator, research binocular non hinged type with built in light and with light intensity regulator, Research Trinocular - Non-Hinged type -with built-in light and with light intensity regulator Conformity to Indian Standard Research IS:5204 latest - ISI MARKED false true, false Eye piece Type Compensating Huygenian, Compensating Binocular Eye pieces yes - 1/3 Confirming to the requirements of IS: 8275/1976 ( latest) Eye Piece with magnification Set of Two For Binocular 10x monocular 5 x, monocular 10 x, monocular 15 x, set of two for binocular 5 x, Set of Two For Binocular 10x Objective Type Apochromatic achromatic, semiapochromatic, Apochromatic Objective Magnification 100X 10 x, 20 x, 40 x, 45 x, 90 x, 100X Numerical Apperture of Objective 1.25 0.25, 0.5, 0.65, 1.25 Type of lamp for Illumination led - GENERIC Plano Concave mirror attachment NA - Stage Ractangular - Size of Stage Approx. 135mm x 153mm - Coarse and Fine Movement of stage yes - Co-axial focussing true - Micrometer Arrangement true - ACCESSORIES Extra eyepieces (inclusive in the scope of supply) NA 5 x, 10 x, 15 x, set of two 5 x, set of two 10 x, set of two 15 x, NA Carrying case (inclusive in the scope of supply) yes - WARRANTY Warranty 1 1, 2, 3, 4, 5 Higher is better CERTIFICATION Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification false - Test Report No and Date NA - Name and Address of the Lab NA - * Bold specifications are the golden parameters. Consignees and Quantity 2/3 S.No. Consignee Address Quantity Delivery Days 1 Rajendra Prasad Songara 345001, barmer Road jaisalmer 1 15

built up trucks Average Turn Over of Last 3 Years 450 Lakh (s) Experience with Gov. Required 1 Year (s) Built Up Trucks ( 6 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Generic Parameters Vehicle Engine Capacity (cc) 5760.0 * Model No 1618 Tipper Any applicable text(s) Pay Load Capacity (Tonne Load) 9.0 Any applicable numeric value Type of chassis for Vehicle Tipper * Chassis with Built up Cabin true true, false Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince BS-IV BS-IV, BS-III (Only For Defence) Colour of the Vehicle Yellow * Engine BHP@rpm (hp@rpm) 177@2400rpm Any applicable text(s) Engine Torque Max@rpm (Engine 660@1200-1900rpm Any applicable text(s) 1/5 Torque Max@rpm) Top Speed (Kmph) 80.0 * Braking Distance (m) 0.0 * Gradeability of Vehicle (%) 38 Any applicable text(s) Engine Aspiration System TurboCharged Natural, Supercharged, TurboCharged, Turbocharged Intercooled Fuel Tank Capacity (Ltrs) 212.0 * Load Body Type Tipper Body * Trailer Type nil * Ground Clearance (mm) 253.0 Any applicable numeric value Floor Area (sq. mm) 10.5 * Wheel Base (mm) 3607.0 Any applicable numeric value Kerb Weight (Kg) 7100.0 Any applicable numeric value Gross Vehicle Weight (Kg) 16200.0 Any applicable numeric value Type of Vehicle Tyre Tube Tube, Tubeless, Radial, Bias Vehicle Transmission System Manual Automatic, Manual Drive Axle Rear * No of Axle (Nos) 2.0 * Axle Configuration ( No of Outside Tyre x No of Driving Tyre) 4x2 * Type of Front Axle and Suspension System Semi Elliptical Multileaf * Type of Rear Axle and Suspension System Semi elliptical multileaf * No. of Speed/Forward Gears 6 * Type of Steering Power Operated Manual, Power Operated Turning Radius (mm) 7050.0 * Type of Clutch Single plate dry type * Type of Front Brakes Drum * Type of Rear Brakes Drum * 2/5 Certification Vehicle Certification ARAI/VRDE/ICAT No ARAI-AAKN0066 Any applicable text(s) Constructional Parameters Type of Cabin Day cabin * Overall Length (mm) 5964.0 * Overall Width (mm) 2432.0 * Overall Height (Cabin) (mm) 3200.0 * Type and Location of Shock Absorbers Semi electrical Multileaf in front and rear * No of Front Tyre (Nos) 2.0 * No of Rear Tyre (Nos) 4.0 * Size Of BIS marked Front Tyre with Ply Rating 10.00X 20-16PR * Size of BIS marked Rear Tyre with Ply Rating 10.00X20- 16PR Any applicable text(s) Performance Parameters Vehicle Mileage ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Km/Ltr) 4.0 1.0E-6-9999999 Warranty Distance (Km)unlimited during warranty period 100000.0 Any applicable numeric value Warranty Time (Months) 12.0 12, 24, 36, 48 Transportation Charge in Rupees Per Km (Rs/Km) 18.0 * No of Free Service (Nos) 3.0 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dr. Pankaj 208002, Kanpur Nagar Nigam, Motijheel, Kanpur 6 15

Multimedia Projectors

Multifunction Machines

Portable Mobile Test Kit

hopper or tipper Average Turn Over of Last 3 Years 100 Lakh (s) Experience with Gov. Required 5 Year (s) Hopper Or Tipper ( 6 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Box body Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, - Main Engine Capacity (cc) 1396 - Make of Chassis - - Type of Chassis Frame - - Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) 1/6 Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 17.88 Speed, Max (Km/Hr) 80 - Main Engine Aspiration Turbocharged Intercooled Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 4 Fuel Tank Capacity (Ltrs) 38 Gradeability of Vehicle with load( %) 24.93 - Gradeability of Vehicle without load ( %) 25.2 - Ground Clearance (mm) 160 Wheel Base (mm) 2380 - Kerb Weight (Kg) 1100 Gross Vehicle Weight (Kg) 2255 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - - Type of Front Axle and Suspension System - - Type of Rear Axle and Suspension System - - Type of BIS MARKED Vehicle Tyre Radial - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 5 - Type of Steering Power Operated Manual, Power Operated Turning Radius, Min (mm) 5100 Speed Governers yes - 2/6 ABS Fitted No - Front Vehicle Brake - - Rear Vehicle Brake - - Type of Clutch - - Tipping Angle (Degree) 48 Tipper Container cap acity/Volume(cubic metres) 3.2 Certification Chassis Certification ARAI/VRDE/ICAT No. - - Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 15 - No. Of Free Service (Nos) 3 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 4340 - Width of Chassis (mm) 1594 - Height of Chassis (mm) 1858 - Size Of Front Tyres (mm) - - Size Of Rear Tyres (mm) - - Size of Wheel (mm) 14 Tipper body Pivot length (mm) 1546 - Tipper body Length (mm) 2695 - Tipper Body Height (mm) 1082 - Overall Height of Tipper from Ground (mm) 1801 - Body Plate Thickness (mm) 2 Main Frame Thickness (mm) 4 Pneumatic System false - Hydarulic System true - 3/6 Tipping Hydraulic Cylinders(Make) - - Hydraulic System Driven by Main Engine - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - Auxiliary Diesel Engine Transmission - - Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Dumping Height (mm) 551 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 4/6 1 Chetan Sudhakar Vispute 423301, SHIVAJI CHOWK SATANA 6 15

Desktops

Potable water purification system Experience with Gov. Required 2 Year (s) Potable Water Purification System ( 8 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values EQUIPMENT TYPE & FEATURES Type Electrically Operated Reverse Osmosis based water purifier Electrically Operated Reverse Osmosis based water purifier Ultraviolet (UV) LAMP Yes Yes Ultra Voilet (UV) Lamp power consumption 11 * STANDARDS Conformity to Indian Standrad for System IS 14724 (latest) for water purification system with Ultraviolet disinfection * Number of float valves/sensors 1 1-5 INPUT PARAMETERS Input Water TDS 1000 1000 OUTPUT PARAMETERS Recovery at 27 degree Centigrade 25-35 25-35 Output Water of RO system Conforming to Indian Standard IS 10500(latest) * 1/3 Output water capacity (Litre/Hour): 10 10 Arsenic and Floride removal capability true true, false Misc, warranty etc Thin-film composite membrane Yes Yes High Pressure Pump Yes * Raw water/Chemical Raw water/Chemical Cleaning PUMP Yes Yes Pre Filter Vessels: Yes Yes Micron Filter Yes Yes, No Membrane Housing Yes Yes, No, NA Auto cut Yes Yes No of candles (Nos) 1 1 Installation Type Wall mounted Wall mounted Warranty period ( for free replacement of machine 2 2.0 (or higher) Warranty Period (for scope including free of cost candle and activated carbon onsite replacement twice a year) 2 2.0 (or higher) Antiscalant- where silica is up to 100 ppm/where Mica is up to 100 ppm Yes Yes Chloride & Flouride removal facility Yes with Pump Yes with Pump Test Report Availability of type test report(Design Evalution Reports) as per IS:14724 and IS 10500 - * Test certificate No and date: - * Name and Address of laboratory which conducted Test: - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 2/3 1 Kuldeep Singh Chandel 481001, New Collectorate, Balaghat 8 15

Desktops

bunting cloth cotton khadi Bunting Cloth Cotton Khadi ( 20000 ) Technical Specifications Specification Specification Name Values Allowed Values SPECIFICATION Governing Specification Conforming to BIS specification No IS: 4106-1994, latest - MANUFACTURING The yarn used in the manufacture of item shall be hand spun from clean carded cotton. Yes - Item is manufactured by using handloom and not by powerloom. Yes - COLOUR Colour Green - Colour fastness to Washing- Change in colour and staining on adjacent fabric 4 or better - Colour Fastness to Light 5 or better - DIMENSIONS Length 10 to 20 Mtrs - Width 91 - CONSTRUCTION Ends per dm 142 - Picks per dm 126 - Mass (g/square mtr) 190 - 1/2 TEST REPORT Availability of Test Report from NABL/ILAC accredited or Central Government Lab to prove conformity of products to the specification. Yes - Test report to be furnished to buyer on demand Yes - Name of the Lab na - Address of The Lab na - Test Report No. na - Test Report Date na - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kul Bhushan 160031, Government Medical College & Hospital Sector 32, Chandigarh, 160031 20000 40

Line Intractive UPS with AVR Line Intractive UPS With AVR ( 20 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Rating in KVA/min VAH capacity of battery (KVA/VAH) 0.65/400 As per GeM Catalogue. Technology MOSFET-PWM MOSFET-PWM, IGBT- PWM Type of battery SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 Rated Output (Volt) Single phase sinewave 230v AC, 50Hz Single phase sinewave 230v AC, 50Hz, Single Phase Quasi-Sin-wave 230 V AC, 50 Hz Degree of protection IP-21 IP-21, IP 20 Inverter Efficiency (%) >/= 70% >/= 60%, >/= 70% Warranty for the battery from the date of delivery 1 year 1 year, 3 Years Warranty for Line Interactive UPS 1 Year 1 Year, 2 Years, 5 Years, 3 Years Installation and commissioning instructions Yes - CONSTRUCTIONAL Type of enclosure ABS - AC out put for Yes Yes, No 1/4 printer (not through inverter) Inverter out put socket AC out put for printer (not through inverter) 3 Three pin 2 Three pin, 3 Three pin, Hard wiring, Not applicable FUNCTIONAL Total harmonic distorsion (%) </= 40% - Input (Volt) Single phase sinewave(160-280v) - Switching over time (Mili sec) Maximum 10 milli seconds - Overload Time (Minutes) >/= 10 minutes - Load power factor >/= 0.6 - Variation in AVR output in AC mode (%) AVR (Voltage regulation) output voltage in AC Mode 230 Volts +/-9%, 50 +/-3 Hz - Overload (%) >/=10% - Variation in output voltage in battery mode (%) (UPS output voltage in battery mode) 230 Volts +/- 10% - Variation on output frequency in battery mode (Hz) </=0.5 - PROTECTION Protection against (over discharge) discharge per 12v battery (Volt) 10.5 - Protection for outside input voltage range: If Input voltage goes outside the range 160 to 280 Volts, the system shall switch over to battery mode Yes - Protection against short circuit of UPS Yes - Protection for over voltage and over load Yes - REPORTS AND CERTIFICATIONS Damp heat Test at 45 degree, RH -95% for 2-cycle as per IS:9000 pt-5/sec-1 Yes - Dry heat Test at 45 Yes - 2/4 degree for 16 Hrs as per IS:9000 pt-3/sec-5 Cold Test as per IS:9000 pt-2/sec-4 Yes - Availability of the type test report from central Govt./NABL/ILAC Accredited Lab Yes - Type Test certificate no. and date - - Name Of Lab - - Address of Lab - - As per Meity (Government of India) guidelines UPS shall have valid BIS CRS certifications as applicable Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Manwinder Singh 143005, G T ROAD 20 15

Multifunction Machines

two pan laboratory balance analyticalchemicalphysical Two Pan Laboratory Balance Analyticalchemicalphysical ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Standards Conformity to Indian Standard, IS:9440 latest Yes Yes BIS Marked Yes Yes, No CML No if BIS marked yes otherwise put NA - - Two Pan laboratory Balance must be in Compliance to ISO GLP Standards Yes - Pan shall be as per Standard of Weights and Measures General Rules, 1987 Yes Yes Performance Parameters Type of Laboratory Balance Analytical Analytical, Chemical, Physical Sensitivity (mg) 0.1 mg 0.2 mg, 0.1 mg, 0.05 mg, 1 mg, 2 mg, 5 mg Type of Calibration Internal - Maximum Capacity of weighing (grams) 220 g 100 g, 200g, 250 g, 220 g Response Time in 3 - 1/4 seconds Shape of PAN Circular Concave, Flate, Circular Power Supply Single Phase - Warranty (Year) 1 1, 2, 3, 4, 5 Dimensional Parameters Material for Case - - Minimum Overall Diameter of Pan (mm) 91 - Material of Pointer, Levelling Arrangment, Pointer Scale, Rider Arrangement, Pointer Adjusting Screws and Stirrups must be as per Indian Standards 9440 latest Yes - Additional Parameters Tare Facility true - Availability of Permanent Shock Absorption facility Yes - Overload Protection Yes - Marking of Left and Right to PAN Yes - Packing of Balance should be in convenient wooden case suitably padded and fitted with proper supports at various points Yes - Printer and PC Connectivity true true, false if Printer and PC connectivity is Yes mode of Connectivity (USB or RS232) otherwise put NA - - Piece counting Features true true, false Totaling true true, false Check Weighing true true, false Operating temperature Range (-10 Degree to 50 Degree Celcius) Yes - Reports Model Approval certificate for each model from director Legal Metrology Yes - 2/4 Model Approval certificate No and date for each model - - Availability of Type Test reports From Central/Govt NABL/ILAC Accredited lab for weighing scale as per 9440 latest Yes - Test Report No - - Test Report Date - - Name of Lab - - Complete Address of Lab - - Calibration from concerned weight and measurement controllerate to be obtained at the time of supplies Yes - Model approval certificate, Type test report and calibration certificate to be furnished if asked by buyer at the time of supplies Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ratheesh AR 695033, Excise Head Quarters Nandavanam Vikasbhavan P O Thiruvananthapuram 1 15

Electronic Lectern ( PAC Only ) Electronic Lectern ( 1 ) ( Under PAC ) Make globus Model globus-gel-19p Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Type Type of Electronic Lectern Processor Based Processor Based Chasiss Type of Chassis Frame Metallic Metallic Mount Tupe Floor Mounted With Wheels * Material of Chassis Polymer Coated CRCA Steel Sheet * Thickness of Enclosure (mm) 1.6 mm(Min) CRCA Sheet * Screwless Chasis Yes * Adequate Space for Additional Devices Yes * Drawers/Cabinets Yes * If yes, Lockable Yes * Display Display Available Available 1/5 Display Size (inches) 21 to 22 21 to 22 Display Type LED TFT, LCD, LED Screen Resolution (Pixles) 1366×768 * Aspect Ratio 16:09 * Tilt Screen Yes * If yes, Tilt Mechanism Manual * Pre-Build Housing Yes * Touch Support Available * If yes, Touch Type Capacitive * Stylus Yes Yes, No Stylus Type Battery/Power Operated Battery/Power Operated, Battery Free Pen Antiglare Yes * Scratch Resistant Yes * Vandal Resistant Screen Yes * Brightness (NITS) Minimum 250 250 BIS Registration Number Under CRS for Display - * System Details Processor Make Intel * Processor Series Intel core i3 * Processor configuration 3.2 * Operating System (Pre-loaded) Windows 10 DOS, Linux, Windows 8.1, Windows 10, Microsoft Education Antivirus with one year Antivirus with one year liscense Available * RAM Memory(Gb) 4 * Storage/HDD (GB) 500 320, 500, 1024 Built-in Standard Keyboard Available * Built-in Mouse Available * Visualiser Visualiser Not-Available * Total Pixels (Mega Pixel) NA * Zoom Functionality Not-Available * Zoom NA * 2/5 Frame Rate (fps) 30 * Shooting Area NA * Focus Manual * Resolution (Pixel) No * Internal Memory (Gb) 0 * Remote Control Not-Available * White Balance Manual * VGA Port Not-Available * HDMI Not-Available * Audio Port Not-Available * SD Card Slot Not-Available * USB 2 0 * USB 3 Not-Available * LAN Not Available * Built-in Devices Optical Disk Drive Compatibility Yes * Inbuilt Speakers Available * Number of Speakers 2 * Wattage of Each Speaker (Watt) 40 * Central Control Panel Available * Gooseneck Mic 1 * Wireless Mic 1 * Handheld Mic 1 * Wireless Reciever 1 * Amplifier Available * Amplifier Wattage (Watt) 100 * Console Panel Ports Usb 2 1 * Usb 3 1 * VGA Ports 1 * HDMI Ports 1 * Video Pin 0 * RJ 45 1 * Power Backup Min 30 Minutes UPS Supplied UPS Supplied, Not Available Cooling System Available * Generic Information Maximum Power Consumption (Watt) 115 * 3/5 Operating Temperature Range (Degree C) 5-45 * Storage Temperature (Degree C) -10 to 55 * Operating Humidity (RH) (%) 40 Deg at 90% RH non condensing * Storage Humidity (RH) (%) 90 * Overall Dimensions (cm x cm x cm) 134.62 x 124.46 x 63.5 * Weight (Kg) 90 * BIS Registration Number for Rest of the Components - * On site OEM Warranty in years 1 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rekha Ranawat 307001, Govt, girls College, SIROHI, RAJASTHAN, 307001 1 15

Desktops

Human Resource Outsourcing Service

Televisions

almirah- Steel Almirah- Steel ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS:3312 latest true - No of shelves (Nos) 4 - Type of Shelves Fixed - Locker Provided false - Locking System with the locker NA - Cloth hanging provision in the Almirah false - Number of Doors (Nos) 2 - Door Stiffner upto full door height Provided with the almirah doors true - Number of Hinges with each door (Nos) 3 - Number of Glass Sheet fixed in each Almirah door (Nos) N.A - Construction Welded - Lock Three Way bolting device controlled by lock - MATERIAL Material M.S sheet conforming M.S sheet conforming 1/4 to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1 to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1, M S Sheet conforming to Quality Grade D of IS:513/2008 with amend. no. 1 (Not as per IS 3312) Material of Almirah Doors M S Sheet M S Sheet, 5 mm thick Transparent Glass Sheet fixed in the MS sheet frame, 3mm thick polycarbonate sheet fixed in the ms sheet frame, perforated MS sheet Sheet Thickness of Locker N.A - Length of Glass Sheet ±10 (mm) N.A - Width of Glass Sheet ±10 (mm) N.A - Sheet Thickness of door in mm 1.0 mm - Sheet Thickness of sides, back, Top and Bottom 1.0 mm - Sheet Thickness of Shelves 1.0 mm - Sheet Thickness of Pedestal in mm 1.0 mm - Material of Lock lock having made of steel with zinc plated finish having brass levers and MAZAK ZAMAK bolts having zinc plated finish along with MAZAK/ZAMAK handle - Material of Keys keys made of MAZAK ZAMAK having nickle plated finish - DIMENSION Height (Without Pedestal) (in mm) (+/- 10 mm) 1855 1000, 1155, 1855, 1800, 2000, 850, 1050, 1325, 1450 Width in mm (± 7 mm) 760 760, 910, 1023, 700 Depth in mm (±5 430 430, 455, 480, 486, 2/4 mm) 270, 370, 400 Inside Height of Locker in mm (± 5 mm) N.A - Inside Width of Locker i mm (±5 mm) N.A - Inside Depth of Locker in mm (±5 mm) N.A - Width of Stiffner in mm (±5 mm) 125 mm - Thickness of MS Sheet of Stiffner (in mm) 0.8 mm - Stiffened Pedestal height in mm (±2 mm) 125 - Pedestal Width in mm (±2 mm) 80 - COLOUR & FINISH Finish powder coated - Colour of Paint ash gray - Packing: Corrogeted Paper Packing - CERTIFICATION ISI marked false - WARRANTY WARANTEE PERIOD IN NUMBER OF YEARS 2 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Jameel Akhtar Khan 481001, Executive Engineer office of PWD Division 01 Balaghat 10 15

Infantometer- ICDS Average Turn Over of Last 3 Years 30 Lakh (s) Experience with Gov. Required 3 Year (s) Infantometer- ICDS ( 704 ) Technical Specifications Specification Specification Name Values Allowed Values Standards Confirmity to Infantometer as per ICDS standards Yes Yes Performance Parameters Infantometer (Portable Board Must designed to measure length of baby in Recumbent Position) Yes - Firm and Flat Horizontal Surface Yes - Graduation for Infantometer (cm) 0.1 cm - Accuracy for Infantometer (cm) +/-0.1cm +/-0.1cm, +/-0.2cm Precision for Infantometer (cm) +/-0.1cm +/-0.1cm, +/-0.2cm Warranty in Years 1 1, 2, 3, 4, 5 Dimensional and Material Parameters Unit of Measurement Centimeters - Width of board for infantometer in cm Approx 30 cm - Length of Infantometer 100 - 1/5 For Measuring in cm Weight of Infantometer (in kg) 1.9 - Material of board ABS Material make (Acrylonitrile butadiene styrene). - Thickness of Material of Board 6 - Additional Features Availability of Fold Up mechanism Yes - Double sided Graduation for easy measurements and orientation of numeral on the measurement parallel to the board for facilitiating quick and easy reading of the results Yes - Durable and Resistance to effect of excessive Humidity, High temperature Yes - Low weight, compact and easy to transport Yes - No part should be loose and shaky during transportation Yes - Simple and fast set up no tools(screw driver etc) required Yes - Water Resistant and Shock Resistant Yes - Free from Sharp Edges and Corners Yes - Availability of angled edges(Curved Edges) to prevent baby from roling sidelong Yes - Fixed Head board and smoothy Moving foot Board Yes - Long lasting and easy to read in Low Lights Yes - No need for calibration all parts to be in fixed position Yes - Stable Connections assuring Accurate Yes - 2/5 measurement A Movable Foot Piece Perpendicular to the measuring Board Yes - Antiskid features Yes - Carry bag of Standard quality Yes - Instructions for use, training, maintenance and trouble shooting in English, Hindi and any other regional laungase as required by buyer appropriately illustrated with pictograms Yes - Packed in a carton box which should be of sturdy quality and provides adequate protection of goods whille in transportation Yes - Reports Model approval from Director (Legal Metrology) Department Yes - Certificate Number and Date form Director ( legal Metrology ) Department - - Type Test Cerificate including Environmental conditions from Regional Reference and Standard Laboratory (RRSL) Yes - RRSL Certificate Number, Date and Address - - Calibration from concerned weight and measurement controllerate to be obtained at the time of supplies Yes - Model approval certificate, Type test and calibration certificate to be furnished if asked by buyer at the time of Yes - 3/5 supplies * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kailas Namdev Ghodake 431401, Zilla parishad, Jintur road, parbhani 704 15

Infant Weighing Scales - Spring Type ICDS Average Turn Over of Last 3 Years 10 Lakh (s) Experience with Gov. Required 3 Year (s) Infant Weighing Scales - Spring Type ICDS ( 414 ) Technical Specifications Specification Specification Name Values Allowed Values STANDARDS Confirmity of Infant weighing scales - Spring Type to ICDS standards Yes Yes Performance Parameters Mechanism of Weighing Spring Type Mechanical Based - Purpose Growth Monitoring and Anthropometric Surveys - Minimum Graduation for Weighing Scale in grams (infant) 100 Reading time for Weighing Scale (infant) (Must be less than 15 Sec) 3 - weight Measuring Range in kg(must be between 0 to 25 kg) Yes Yes Warranty in Years 1 1, 2, 3, 4, 5 Dimensional and Material of Dial ABS Plastic With - 1/4 Material Parameters Perspex Cover Material of Hooks Stainless Steel - Material of body Plastic - Material of mechanics and other vital parts should be Rust Proof Yes - Material of Calibration Screw Stainless Steel - Display Dial Diameter for Weighing Scale 16 Weight of patient Sling Scale (Kg) 1.1 - Additional Supplies and Features Infant weighing Scale supplied with Both Weighing Trouser and Sling Both Weighing Trouser and Sling Smooth Surface of Weighing scales Yes - Easy Readability in Low Light Yes - Easy maintenance and repair in low tech settings possible, smooth Surface and finishing allows easy cleaning and disinfection Yes - Fit with 2 hooks, non- removable Upper for fixation and lower for attaching weighing trouser or sling Yes - Instructions for operating, training, maintenance and troubleshooting with appropriate illustrated pictograms in English, Hindi and other regional language as per the requirement of buyers Yes - PACKING REPORTS Model approval from Director (Legal Metrology) Department Yes - Certificate Number and Date form Director ( legal Metrology ) Department - - 2/4 Type Test Cerificate including Environmental conditions from Regional Reference and Standard Laboratory (RRSL) Yes - RRSL Certificate Number, Date and Address - - Calibration from concerned weight and measurement controllerate to be obtained at the time of supplies Yes - Model approval certificate, Type test and calibration certificate to be furnished if asked by buyer at the time of supplies Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kailas Namdev Ghodake 431401, Zilla parishad, Jintur road, parbhani 414 15

Air Conditioner

Drinking Water Cooler

Mother and Child Weighing Scales -ICDS Average Turn Over of Last 3 Years 50 Lakh (s) Experience with Gov. Required 2 Year (s) Mother And Child Weighing Scales -ICDS ( 710 ) Technical Specifications Specification Specification Name Values Allowed Values Standards Confirmity to IS 9281 (part 1 and Part2 )1979, IS 9281 part 3 and part 4 with latest amendment Yes Yes Confirmity of mother and child weighing scales to ICDS standards Yes Yes Performance Parameters Class of Accuracy of weighing Scale Class III - Measurement Range shall be upto 120 kg or more Yes Yes Graduation Resolution (100 g Minimum) Yes Yes Accuracy (gms) ± 100 gms ± 100 gms Reading Time (It should be less than or equal to 5 sec) 5 - Tare Feature Yes - 1/3 Anti skid features Yes - Type of Battery Lithium Battery - Type of Display LED - Warranty(Years) 1 1, 2, 3, 4, 5 Dimensional and Material Parameters Dimensions (L x W x H) - - Weight of the Mother Child Weighing Scale (including batteries) without packing 4 - Type of Material of weighing scales powder coated ms metal, powder coated ms, SS Thickness of sheet in mm 6 - Additional Features All Vital parts made of rust proof materials Yes - Instructions for use, training, maintenance and troubleshooting in English, Hindi and any other regional language as required by buyer appropriately illustrated with pictograms Yes - Carry Bag of standard quality Yes - Packed in a carton box which should be of sturdy quality and provides adequate protection of the goods while in transportation Yes - Reports Model approval from Director (Legal Metrology) Department Yes - Certificate Number and Date form Director ( legal Metrology ) Department - - Type Test Cerificate including Environmental conditions from Regional Reference and Standard Laboratory (RRSL)) Yes - RRSL Certificate Number, Date and address - - 2/3 Calibration from concerned weight and measurement controllerate to be obtained at the time of supplies Yes - Model approval certificate, Type test report and calibration certificate to be furnished if asked by buyer at the time of supplies Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Zoramthangi Chhangte 796012, H.No.Y/A-46, Chaltla ng Dawrkawn, Near Greenland Higher Secondery School, Aizawl, Mizoram. 710 25