Loading
Loading…
Loading…
2,847 results • Latest
Notebook Computers-laptop
plastic moulded chair Plastic Moulded Chair ( 230 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values GENERIC TYPE OF CHAIR SINGLE PIECE PLASTIC MOULDED SINGLE PIECE PLASTIC MOULDED, PLASTIC MOULDED SEAT CUM BACK WITH SUPPORT STRUCTURE, SEPERATE PLASTIC MOULDED SEAT AND BACK FITTED ON SUPPORT STRUCTURE Seat cushion Without With, Without Back Cushion Without With, Without Conformity to Indian Standard IS 13713- Latest true * Plastic Material POLYPROPELENE FILLED THERMOPLASTIC, UNFILLED THERMOPLASTIC, FILLED THERMOSETTING PLASTIC, UNFILLED THERMOSETTING PLASTIC, 1/4 POLYPROPELENE, PVC (Polyvinyl Chloride), ABS PLASTIC (Acylonitrile Butadiene Styrene) ARMS With arms With arms, Without arms DIMENSION & WEIGHT Seat Width in mm (+/- 5 mm) 570 * Seat Depth in mm (+/- 5 mm) 560 * Chair Height in mm (+/- 10 mm) 890 * Chair Dimensions Conforming To IS 3663 (Latest) * Weight of Chair (IN Grams) 3000 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) No Cushion 40, 45, 50, 55, 60, 65, 70, 75, No Cushion Density of PU Foam in KG per CuM No Cushion 40, No Cushion GSM/Thickness of Fabric (Gram per Sq Meter) N.A 120gsm, 140gsm, 230gsm, 240gsm, N.A Thickness of Polyurethane Foam Used in Backrest in mm (+/- 2 mm) No cushion 40, No cushion Fabric Material composition used for Cushion Cover N.A * PERFORMANCE Stability of the Chair Conforming To IS 5416 (Part 2) * Strength of the Chair Conforming To IS 5416 (Part 1) * Maximum Ash Content is Not more than 1% in Conformity test as per Annex D of IS: 14887 (Latest) Complied that Ash content is less than 1% * UV Resistance Test - % of Tensile strength retention after 192 hours exposure as per ASTM D2562 -99 Table 1- Cycle Number 2 is Complied Minimum 50% tensile strength retained after exposure as per test * 2/4 more than 50 % Support/Under Structure Support/Under Structure Sigle Moulded Piece No Support Structure SS 202 STRUCTURE, SS 304 STRUCTURE, Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum, Sigle Moulded Piece No Support Structure Support Structure Finishing Sigle Moulded Piece No Support Structure Stove enameled Paint, Powder coated, chrome, epoxy polyester, synthetic enamel, Natural Steel Finish, Sigle Moulded Piece No Support Structure CERTIFICATION Test reports to be furnished to buyer on demand NO * MISC Colour Brown * Colour/Pattern of Fabric for Seat and Backrest Cushions As per Buyer's * WARANTEE PERIOD WARANTEE PERIOD IN NUMBER OF YEARS 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajvir Singh 335804, Govt. college suratgarh 230 15
hopper or tipper Hopper Or Tipper ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Garbage Tipper Type of TIPPER if other tipper, please declare type of Tipper, - Main Engine Capacity (cc) 702 - Make of Chassis - - Type of Chassis Frame - - Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 21.5 1/5 Speed, Max (Km/Hr) 60 - Main Engine Aspiration Natural Aspiration Natural Aspiration, Turbocharged, Supercharged, Turbocharged+ Supercharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 30 Gradeability of Vehicle with load( %) 16.38 - Gradeability of Vehicle without load ( %) 18 - Ground Clearance (mm) 160 Wheel Base (mm) 2100 - Kerb Weight (Kg) 720 Gross Vehicle Weight (Kg) 1700 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - - Type of Front Axle and Suspension System - - Type of Rear Axle and Suspension System - - Type of BIS MARKED Vehicle Tyre Radial - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 4 - Type of Steering Manual Manual, Power Operated Turning Radius, Min (mm) 4300 Speed Governers yes - ABS Fitted No - Front Vehicle Brake - - Rear Vehicle Brake - - 2/5 Type of Clutch - - Tipping Angle (Degree) 48 Tipper Container cap acity/Volume(cubic metres) 2 Certification Chassis Certification ARAI/VRDE/ICAT No. - - Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 12 - No. Of Free Service (Nos) 3 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3800 - Width of Chassis (mm) 1500 - Height of Chassis (mm) 1845 - Size Of Front Tyres (mm) - - Size Of Rear Tyres (mm) - - Size of Wheel (mm) 12 Tipper body Pivot length (mm) 1546 - Tipper body Length (mm) 2165 - Tipper Body Height (mm) 670 - Overall Height of Tipper from Ground (mm) 1489 - Body Plate Thickness (mm) 2 Main Frame Thickness (mm) 4 Pneumatic System false - Hydarulic System true - Tipping Hydraulic Cylinders(Make) - - Hydraulic System Main Engine - 3/5 Driven by Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - Auxiliary Diesel Engine Transmission - - Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Steel, Aluminium, Chromium Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Dumping Height (mm) 352 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Abhishek Jain 464111, bus stand shamshabad 2 15 4/5
Printer ( PAC Only ) Average Turn Over of Last 3 Years 19 Lakh (s) Experience with Gov. Required 12 Year (s) Printer ( 34 ) ( Under PAC ) Make hp Model hplaserjetprom202dw Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specifications Printing Technology Laser Laser Cartridge Technology composite composite Type of printing mono mono Paper Size a 4 A4, A3 Print Speed (A4) - Mono (PPM) 25 Any applicable numeric value Print Speed (A4) - Color (PPM) 0 Any applicable numeric value Resolution (Dpi) 1200 x 1200 * Memory (MB) 128 * Hard Disk Capacity (GB) 0 * 1/3 Processor Speed (Mhz) 750 * Duplexing Feature yes * Duplex Print Speed (PPM/IPM) 18 18 Network Connectivity yes * Network Interface, if available Ethernet 10/100 * Wireless Connectivity No * If Yes, Type of Connectivity NA * USB Port yes * Paper Tray Capacity 250 * Number of Paper Trays 1 * Yield of Cartridge/Ink Tank/Ink Pack supplied with printer(Per Set) 1 * Life of Drum in terms of number of Prints in case of Separate Drum and Toner cartridge technology (No of Prints ) 0 * Duty Cycle/month (No of Prints) 30000 * Operating Temperature Range (Degree C) 15 to 32.5 * Operating Humidity (RH) (In %) 10 to 80 * Dimensions(In mm x mm x mm ) 384 x 403.7 x 250.9 * Weight (In kg) 6.6 * BIS Registration under CRS of Meity Yes * BIS Registration no - * On site OEM warranty (Years) 1 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 SUJAY KUMAR 522004, o/o Commissioner of Sericulture, A.P., 1st Floor, Old TTPC Building, Near Rythu Bazar, Chuttugunta, 34 15 2/3 Guntur
Professional Large Format Display
Air Walker- Air Stroller- Outdoor Gym Equipment Air Walker- Air Stroller- Outdoor Gym Equipment ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values TYPE Type Double Double SIZE/DIMENSIONS Length 1615 - Width 600 - Height 1600 - CAPACITY Maximum User Weight ( Kg ) 120 120.0 MATERIAL Governing Specification for GI Pipes BIS specification No IS 1161:2014, latest BIS specification No IS 1239 ( Part 1 )- 2004, latest, BIS specification No IS 1161:2014, latest All the GI Pipes are ISI marked true true Main Frame 125 mm Nominal Bore G.I. Pipe 125 mm Nominal Bore G.I. Pipe Main Frame Pipe, Class as per IS 1239 Heavy Medium, Heavy, Not applicable for pipe as per IS 1161 leg movement frame 40mm Nominal Bore G.I. Pipe 32mm Nominal Bore G.I. Pipe, 40mm Nominal Bore G.I. Pipe, 50mm Nominal Bore G.I. Pipe Leg Movement Frame Pipe, Class as Heavy Medium, Not applicable for pipe as 1/4 per IS 1239 per IS 1161 Handle Frame 32mm Nominal bore G.I. pipe 25mm Nominal bore G.I. pipe, 32mm Nominal bore G.I. pipe Handle Frame Pipe, Not applicable for pipe as per IS 1161 Movement must be supplied with bearings Yes - Bearings Ball Bearing Ball Bearing, Tapered Roller Bearing Bearings shall be self lubricating and sealed for protection against Rain and dust etc Yes - Foot Rest Aluminum casting material Fibre Reinforced Plastic, Aluminum casting material, C.I., LDPE, HDPE, Nylon MS Foundation Plate Thickness 12 10, 12 Foundation Pipes with anchoring 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm, 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm Nominal Bore of Foundation Pipe 100mm 80mm, 100mm, 125mm, 150mm Foundation Pipe, Not applicable for pipe as per IS 1161 Galvanization of all Pipes Zinc coating on the tubes shall be in accordance with IS 4736 latest. - Nuts and Bolts for Assembly G.I. - Closing Caps of open ends of the pipes, bearings, bushes and base G I Caps - Thickness of closing caps ( min ) 2 - All Plastic Components U V stabilised, weather resistance - COLOUR Colour As per buyer's requirements - 2/4 Paint/Finish Powder Coated, UV resistant - Paint Coating Thickness ( min ) 80 - OTHER REQUIREMENTS Ergonomic Design Yes - Foot rest shall be antislip/antiskid Yes - Moving ( swinging ) Scope should be Limited Yes - There shall be no crushing or searing points for user between moving and/or stationary parts of equipment during use Yes - Equipment shall be free from entrapments and sharp edges Yes - Installation Instructions must be provided Yes - Installation Included Included Safety and quality Requirements European Standard EN 16630: 2015 latest - Instruction Plate Stainless Steel, Size 150 X 230 X 0.7mm, with indelible printing - CERTIFICATION Certfication ( Safety and Quality Requirements ) As per European Standard EN 16630 As per European Standard EN 16630, No APPROVAL Drawing depicting detailed dimensions and foundation details shall be got approved from buyer before installation, if desired by buyer Yes - WARRANTY Warranty ( years ) 2 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Narendra Kumar Rai 313332, Deogarh Road Amet 2 15 3/4
Chest Press - Outdoor Gym Equipments Chest Press - Outdoor Gym Equipments ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values TYPE Type Chest Press Double Chest Press Double SIZE Length 1675 - Width 782 - Height 2160 - CAPACITY Maximum User Weight ( Kg ) 120 120.0 MATERIAL Governing Specification for GI Pipes BIS specification No IS 1239 ( Part 1 )- 2004, latest BIS specification No IS 1239 ( Part 1 )- 2004, latest, BIS specification No IS 1161:2014, latest All the GI Pipes are ISI marked true true, false Main Central Pipe 80mm Nominal Bore G.I. Pipe 80mm Nominal Bore G.I. Pipe, 100mm Nominal Bore G.I. Pipe, 125 mm Nominal Bore G.I. Pipe, 150mm Nominal Bore G.I. Pipe Main Central Pipe, Class as per IS 1239 Heavy Medium, Heavy, Not applicable for pipe as per IS 1161 Designation of Main Central Pipe ( as per IS 1161 ) HEAVY - 1/5 Handle Frame 40mm Nominal bore G.I. pipe 32mm Nominal bore G.I. pipe, 40mm Nominal bore G.I. pipe Handle Frame Pipe, Not applicable for pipe as per IS 1161 Designation of Handle Frame Pipe ( as per IS 1161 ) HEAVY - Seat Frame 40mm Nominal Bore G.I. Pipe 32mm Nominal Bore G.I. Pipe, 40mm Nominal Bore G.I. Pipe Seat Frame Pipe, Not applicable for pipe as per IS 1161 Designation of Seat Frame Pipe ( as per IS 1161 ) HEAVY - Connecting Links 40mm Nominal Bore G.I. Pipe 25mm Nominal Bore G.I. Pipe, 32mm Nominal Bore G.I. Pipe, 40mm Nominal Bore G.I. Pipe, 10mm thick MS plates, 12mm thick MS plates Connecting Links Pipe, Not applicable for M.S. Plates and Pipes as per IS 1161 Designation of connecting link Pipe ( as per IS 1161 ) HEAVY - Foot Rest Pipe 32mm Nominal Bore G.I. Pipe 25mm Nominal Bore G.I. Pipe, 32mm Nominal Bore G.I. Pipe Foot Rest Pipe, Not applicable for pipe as per IS 1161 Designation of Foot Rest Pipe ( as per IS 1161 ) HEAVY - MS Foundation Plate Thickness 12 12.0 Foundation Pipes with anchoring 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm, 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm 2/5 Nominal Bore of Foundation Pipe 150mm 150mm Foundation Pipe, Class as per IS 1239 Heavy heavy Designation of Foundation Pipe ( as per IS 1161 ) HEAVY - Galvanization of all Pipes Zinc coating on the tubes shall be in accordance with IS 4736 latest. - Seat and Back Rest 6mm thick, Fibre Reinforced plastic with uniform bending radius to avoid sharp edges 2mm Thick G.I. Seat with uniform bending radius to avoid sharp edges, 3mm thick, HDPE with uniform bending radius to avoid sharp edges, 6mm thick, Fibre Reinforced plastic with uniform bending radius to avoid sharp edges, 2.5mm thick, M.S. Perforated with uniform bending radius to avoid sharp edges, LLDPE with uniform bending radius to avoid sharp edges Hand Grips Polyurethane - Nuts and Bolts for Assembly Stainless Steel - Movement must be supplied with bearings Yes - Bearings Ball Bearing Ball Bearing, Tapered Roller Bearing Bearings shall be self lubricating and sealed for protection against Rain and dust etc Yes - Closing Caps of open ends of the pipes, bearings, bushes and base Fibre Reinforced Plastic - Thickness of closing caps ( min ) 3 - All Plastic Components U V stabilised, weather resistance - COLOUR Colour As per buyer's requirements - 3/5 Paint/Finish Powder Coated, UV resistant - Paint Coating Thickness ( min ) 100 - OTHER REQUIREMENTS Ergonomic Design Yes - Moving Scope should be Limited Yes - There shall be no crushing or searing points for user between moving and/or stationary parts of equipment during use Yes - Equipment shall be free from entrapments and sharp edges Yes - Installation Instructions must be provided Yes - Installation Included included Safety and quality Requirements European Standard EN 16630: 2015 latest - Instruction Plate Stainless Steel, Size 150 X 230 X 0.7mm, with indelible printing - CERTIFICATION Certfication ( Safety and Quality Requirements ) As per European Standard EN 16630 As per European Standard EN 16630, No Registration No and Validity of Registration N A - APPROVAL Drawing depicting detailed dimensions and foundation details shall be got approved from buyer before installation, if desired by buyer Yes - WARRANTY Warranty ( years ) 3 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Narendra Kumar Rai 313332, Deogarh Road Amet 2 15 4/5
Notebook Computers-laptop Notebook Computers-laptop ( 22 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel Intel Processor Generation 6 th 6 th Processor Intel Core i3-6006u (2.0 GHz, 3 MB cache, 2 cores) Intel Core i3-6006u (2.0 GHz, 2 cores) Graphics Graphics Type Integrated - Graphics Card Description INTEL @ HD GRAPHICS 520 - Graphics Memory (GB) 00 - Memory Type of RAM DDR 3 - RAM Size (GB) 4 4 (or higher) RAM Expandable upto ( in GB) using spare DIMM Slot on Mother Board 16 16 RAM Speed (MHz) 2133 - Storage Type of Hard Disk Drive SATA SATA Hard Disk Drive Size( GB) 1000 1000.0 Higher is better Hard Disk Drive Speed 7200 - 1/4 (rpm) Operating System Operating System Windows 10 Home Windows 10 Home Ports USB 3.0 or higher (No.) 2 - USB Type C Not-Available - VGA Port Not-Available - HDMI Port Available - DISPLAY PORT Not-Available - Thunderbolt Port Not-Available - Connectivity Network Connectivity Ethernet Gigabit 10/100/1000 - Wi-fi Connectivity 802.11 ac - Bluetooth 3 - Display LCD LED Backlit Display Type Non Touch Non Touch Display Size (Inch) 15.6 15.6 (or higher) Display Resolution (Pixel) 1366 x 768 1366 x 768 Certification BIS Registration under CRS of Meity Yes - BIS Registration no. - - BEE/Energy Star Certification - - ROHS Compliance Yes - Additional feature Finger Print Reader No - Webcam (HD or Better) Available - Miscellaneous Optical Drive Available - Keyboard Standard - Trusted Platform Module Enabled Yes - Weight (With Battery) (Kg) 2.1 - Carry Case Included Included Power Battery Type (Li-Ion/Li- Polymer) Built-in - Battery Back-up (Hours) 6 - Warranty Battery Warranty (Year) 1 1 (or higher) On Site OEM Warranty (Year) 1 1 (or higher) * Bold specifications are the golden parameters. 2/4 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Prateek Katare 482001, Zila Panchayat Campus Near Ambedkar Chowk Jabalpur 22 15
LED Luminaire (For Road and Street Lights) LED Luminaire (For Road And Street Lights) ( 100 ) Technical Specifications Specification Specification Name Values Allowed Values STANDARDS LED Luminaire conformity to IS:10322/Part 5/Section 3/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest Yes - Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes - Types of LED Luminaire as per the IS: 16107(Part-2 Sec.-1)/2012 Type B - Types of LED Modules as per the IS:IS: 16103(Part-2)/2012 Type 3 - LED Rating (in Watts)/System Wattage/Rated Power 90W 90W Luminaire System Efficacy (Lumen/watt) >/= 100 Lm/Watt - Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest IP66 - 1/7 Warranty for free replacement (in years) 3 3 ELECTRICAL EFFICIENCY Input operating Voltage range and frequency 140 to 270 V olts AC at 50 Hz+/-2 with auto cutt off at below 120V - Automatic Higher Cut off voltage above 300 volt Yes - Rated voltage 230 V AC 50 Hz - AC Power Factor at full load ≥ 0.95 - Driver Efficiency (in %age) Upto 100W: ≥85%, Above 100W: >/=90% Yes - Total Harmonics Distortion ≤ 10 - "The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl. 8 of IS:16104:2012 lates)" Yes - OPTICAL LED chip Efficacy ≥130 Lm/Watt - Colour temperature 6000+/-500K - Working life for LED (Minimum 50, 000 burning hours as per LM-80 and LM 21 reports) Yes - Colour Rendering Index(CRI) ≥70 - LED Beam Angle ≥120 - Optic lense materal (UV stabilised) Poly carbonate lense - THERMAL MANAGEMENT Heat sink should be die- cast aluminium along with sufficient heat sink fins to dissipate heat effectively Yes - Junctiojn/Soldering point temperature shall not exceed 85 deg.c as per LM 80 report Yes - Capacitor shall be rated for a temperature of 105 deg. celsius or Yes - 2/7 better Operating temperature range -10 deg C to +50 deg C -20 deg. C to +50 deg. C, 10 deg C to +50 deg C, 10 deg C to +55 deg C Operating Humidity Range 10 % to 95% RH - PROTECTION Short circuit Protection Yes - Over load protecton Yes - Over Voltage protection Yes - Reverse polarity Yes - High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes - Insulation resistance between earth and current carrying part >100 M Ohm - The luminaire shall be protected against surges and transients ( Internal) >/=5KV - The luminaire shall be protected against surges and transients of >/=10KV (External) Yes - CONSTRUCTIONAL The Luminaires casing/housing (single piece housing) shall be pressure die casted aluminium alloy with higher thermal conductivity Yes - The luminaire body must be corrosion resistant powder coated Yes - All fastners must be of stainless steel Yes - Protection of the entire housing (both LED section and driver section) as per IS:10322 (Part 1):1982 latest IP66 - Extruded silicon loop gasket shall be provided in the lantern Yes - 3/7 body to ensure a weather proof seal between the UV Glass cover and the metal housing to exclude the entry of the dust, water, insects etc., Luminaries light transparency should be of Toughened glass Yes - Toughned transparent glass cover thickness >/=4 mm - Toughned Glass shall not get discoloured shall not suffer degration due to heat and ageing within warranty period Yes - Number of electronic control gear (power supplies) 1 No. 1 No., 2 Nos., 3 Nos., 4 Nos. Light Source SMD LED Chip as per LM 80/IS16106 - Driver components shall be industrial grade or above Yes - PCB shall be FR4 grade minimum 0.8 to 1.0 mm thick or more Yes - The Luminaires works on single phase three wires system (Phase, Neutral and Earth) Yes - Suitable connector shall be provided for LED connection between driver output and LED Yes - Length of ISI marked three core wire (shall be provided along with supply of material) 50 cm 50 cm, 100 cm MARKING "Manufactures Name and and brand on the aluminium die cast body " Engraved/Embossed - Manufacturer’s name, model number, serial number Yes - 4/7 Date of manufacture (month-year), and lot number as identification mark inside each unit and the outside of each packaging box Yes - The operation characteristics voltage and power be marked inside of each LED luminaire unit Yes - Diameter of pole Luminiare suitable for: (upto 45W Pole OD: shall be 40mm), (>45W<120W Pole OD: Shall be 50 mm), (above 120W: OD shall be 60 mm for which luminiare is suitable Yes - REPORTS AND CERTIFICATIONS LED Make OSRAM/NICHIA/CREE SAMSUNG/SEOUL LUMILEDS/PHILIPS SYSKA/LUMENMAX EVERLIGHT/EDISON BRIDGELUX NATIONSTAR/REFOND - System must have EMI/EMC compliance as applicable (Test reports shall be furnish to the buyer/consignee on demand) Yes - LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-79 report shall have total lumen output, power, PF, Current in Amps, CRI & CCT etc., ) Yes - LM 80 & TM 21 (Ref. IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab NABL/ILAC accrediated Yes - 5/7 lab. Reports shall be furnish to the buyer consignee on demand (LM-80 report shall have the Pohoto Biological report of the LED Chip being used in the luminaire) Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-3/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes - Seller shall furnish the Type test reports to the buyer/consignee on demand Yes - DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes - LED Luminaire for road and street lighting shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 3): 2012 as applicable on date Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dev Kumar Gupta 484001, Near Tagore Park DD Complex 100 15
Disposable Syringes
Printer or photo Copier Paper Printer Or Photo Copier Paper ( 1500 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 14490 : Latest Yes - Test Method as per IS: 1060 Yes - Size Size and Dimension of The Paper (W X L) in mm 210 x 297 210 x 297, 297 X 420 Size of the Paper A4 A4 GSM of Paper 75 75 Quantity Number of Sheets per Ream 500 500 (or higher) Physical Characteristics Brightness in % 85 Tensile Index MD in Nm/g 42 - Tensile Index CD in Nm/g 30 - Opacity in % 90 - Tear Index (Avg) in Nm.m²/g 5 - Smoothness for both sides (Bendtsen) in 200 - 1/3 ml/min Thickness in µm 100 - Moisture in % 5 - Stiffness MD 3 - Stiffness CD 2 - Surface Strength Dennison (Wax Pick) >= 12 A 11 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Gopiram Kamaliram Kumavani 411001, Samaj Kalyan Office, 3 Church Road, Near GPO. 1500 15
Wireless Access Point
media control systems or wireless presentation system Media Control Systems Or Wireless Presentation System ( 1 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Specification Supported Operating Systems (PC) Windows 8.1 or Windows 10 macOS 10.12 Sierra, macOS 10.13 High Sierra or later * Supported Operating System (Mobile) NA * Type of Video Outputs SDI HDMI * Type of Audio Outputs SDI HDMI * Output Resolution (Pixel x Pixel) 3840 X 2160 Any applicable text(s) Frame Rate (fps) 1 Any applicable numeric value Maximum Number of Simultaneous sources on Screen 1 * Maximum Number of Simultaneous Connections with the 1 * 1/3 system Wireless Standards 802.11 a/b/g/n * Wireless Frequency (GHz) 2.4 * Data Transfer Rate (Mbps) 5 Any applicable numeric value Wireless Range (Maximum) (meters) 10 10-999 Wireless Security features NA * Number of VGA Port 0 * Number of HDMI Port 1 * Number of USB Port 0 * RJ-45 Port Yes * Reset button Not-Available * Audio Jack Socket Yes * Medium of data transmission (From Computer/Laptop to system) Cable Thunderbolt * Essential accessories to be supplied 12V power supply adaptors * Operating Temperature Range (Degree C) 0-45 * Operating Humidity (% RH) 10 * Power Requirements 12V * Power Consumption in Operating mode (Watt) 2 * Power Consumption in Standby mode (Watt) 0.05 * Certifications Available YES * Dimensions (H x W x D) (mm x mm x mm) 5.2 x 5.2 x 1.5" mm * Weight (Gms) 153 * On Site OEM Warranty (Years) 1 1, 2, 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sumit saini 160017, SCO 111-113 sector 17b 1 15 2/3
Desktops Desktops ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel Intel, AMD Processor Generation 7th 6th, 7th, 8th Processor Intel Core i3-7100 (3.9 GHz, 3 MB Cache, 2 Cores) As per GeM Catalogue. Motherboard Chipset Intel H110 As per GeM Catalogue. Expansion Slots (PCIe x 1) (Number) 1 - Expansion Slots (PCIe x 4) (Number) 0 - Expansion Slots (PCIe x 16) (Number) 1 - Graphics Graphics Type Integrated - Graphic Memory N/A - Operating System Operating System (Pre-Loaded) DOS Windows 10 Professional, Linux, DOS, Windows 10 Home, Windows 10 Professional under Microsoft Shape the Future Program RAM Type of RAM DDR 4 - 1/4 RAM Size (GB) 4 4, 8, 16, 32 (or higher) RAM Expandability upto (GB) 64 16, 32, 64 (or higher) RAM Speed (MHz) 2400 - Storage Hard Disk (GB) 1000 500, 1000, 2000 (or higher) Cabinet Cabinet Tower - Cabinet Volume (Litres) - - Internal Bays 1 - External Bays (Number) 2 - DIMM Slots (Number) 2 - Connectivity Wireless NA - Network Connectivity 10/100/1000 on board Integrated Gigabit Port - Ports USB Port 2.0 (Number) 2 - USB Port 3.0 (Number) 4 - Serial Port true - Parallel Port false - VGA true - HDMI true - Display Port true - Monitor Monitor Size (INCHES) 19.5 18.5, 19.5, 21.5, 24, 27 (or higher) Monitor Resolution (PIXELS) 1920x1080 1366x768, 1920x1080, 3200x1800, 3840 x 2160, 1440 x 900, 1600 x 900 Monitor Certification - - Power Power Supply (Watt) - - Minimum Power Efficiency(%) 85 - Certification ROHS Compliance Yes - BEE/Energy Star for the given Model true - Input Devices Mouse Optical - Keyboard Standard - Generic Optical Drive N/A - Internal Speaker false - 2/4 On Site OEM Warranty (Year) 3 3, 5 (or higher) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Deepak Kumar Gupta 325205, DCF BARAN 5 15
hopper or tipper Average Turn Over of Last 3 Years 20 Lakh (s) Hopper Or Tipper ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, - Main Engine Capacity (cc) 702 - Make of Chassis - - Type of Chassis Frame - - Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) Fuel Consumption ( declared by OEM as 20 1/5 certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) Speed, Max (Km/Hr) 60 - Max Engine Power BHP (BHP@rpm) 16 Max Engine Torque (N-M@rpm) 37.5 Main Engine Aspiration Natural Aspiration Natural Aspiration, Turbocharged, Supercharged, Turbocharged+ Supercharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 30 Gradeability of Vehicle with load( %) 21 - Gradeability of Vehicle without load ( %) 21 - Ground Clearance (mm) 175 Wheel Base (mm) 2100 - Kerb Weight (Kg) 840 Gross Vehicle Weight (Kg) 1550 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - - Type of Front Axle and Suspension System - - Type of Rear Axle and Suspension System - - Type of BIS MARKED Vehicle Tyre Tubeless - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 4 - Type of Steering Manual Manual, Power Operated 2/5 Turning Radius, Min (mm) 8600 Speed Governers No - ABS Fitted No - Front Vehicle Brake - - Rear Vehicle Brake - - Type of Clutch - - Tipping Angle (Degree) 45 Tipper Container cap acity/Volume(cubic metres) 2.5 Certification Chassis Certification ARAI/VRDE/ICAT No. - - Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 24 - No. Of Free Service (Nos) 3 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3800 - Width of Chassis (mm) 1500 - Height of Chassis (mm) 1845 - Size Of Front Tyres (mm) - - Size Of Rear Tyres (mm) - - Size of Wheel (mm) 145 Tipper body Pivot length (mm) 1600 - Tipper body Length (mm) 2100 - Tipper Body Height (mm) 1350 - Overall Height of Tipper from Ground (mm) 1900 - Body Plate Thickness (mm) 1.6 Main Frame 2 3/5 Thickness (mm) Pneumatic System false - Hydarulic System true - Tipping Hydraulic Cylinders(Make) - - Hydraulic System Driven by Power Pack Unit - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - If Yes Auxiliary Diesel Power (HP@rpm) 0 Auxiliary Diesel Engine Transmission - - Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Steel, Aluminium, Chromium Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 1.6 Dumping Height (mm) 45 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - 4/5 Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Nikita Shankar Patil 402201, Loknete Datta Patil Bhavan, Alibag municipal council 2 15
Public place seating chair Public Place Seating Chair ( 25 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Type of Seating Integrated Seat and Backrest - Style with arm and backrest with arm and backrest, with arm and without backrest, without arm and with backrest, without arm and backrest Seating Capacity (Nos) 3 2, 3, 4, 5 Number of arms (Nos) 2 - Delivery status Knocked Down Supply to be assembeled by Consignee on site - Seat Cushion WITHOUT CUSHION - Backrest Cushion WITHOUT CUSHION - MATERIAL Material of Main Frame mild steel mild steel, M S ERW tube, SS 202, SS 304 Material of Seat and Backrest Mild Steel Mild Steel, PU Foam reinforced with 2 mm M S sheet inserts, SS 304, MS RECTANGULAR SECTION PIPE 1/3 Material of Arms armrest are made up of powder coated high pressure aluminium dye cast armrest are made up of powder coated high pressure aluminium dye cast, cold rolled steel, MS ERW TUBE, MS RECTANGULAR SECTION PIPE Material of Legs POWDER COATED HIGH PRESSURE ALUMINIUM DYE CAST LEGS cold rolled steel, POWDER COATED HIGH PRESSURE ALUMINIUM DYE CAST LEGS, MS RECTANGULAR SECTION PIPE Material of Side Bar Bracket made up of chrome plated solid steel - Thickness of material of Main Frame in mm 1.1 - Thickness of material of Arms in mm 1.1 - Type of bolts M12 Bolts - Thickness of PU Foam for Seat and Backrest ±2(mm) N.A - Density of PU Foam for Seat and Backrest ±2(Kg/Cubic Metre) N.A - Covering Material for Seat and Backrest NA - DIMENSION Overall Length in mm (±10 mm) 1500 As per GeM Catalogue. Overall Depth in mm ( ±5 mm) 450 As per GeM Catalogue. Overall Height in mm (±5 mm) 760 As per GeM Catalogue. Seat Height from Floor in mm (±5 mm) 340 mm - Thickness of material of Seat and Backrest (mm) 1.2 mm - CERTIFICATION Conforming to International Standard for Public Seating (*BIFMA X 5 dot 4 or equvalent) YES YES, NO COLOUR & FINISH Colour of Covering Material N.A - 2/3 All M S Strucure Finish Chrome Plated - Colour of Paint silver - All steel component to be epoxy powder coated NA - WARANTEE WARANTEE PERIOD IN NUMBER OF YEARS 1 1, 2, 5 MISC Seat and Backrest are Perforated true - Adjuster for legs true - Arms Chrome Plated true - Legs Chrome Plated true - Cushion on Arms false - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 The Dean ACRI 622104, Agricultural College and Research Institute Kudumiyanmlai Pudukkottai 25 15
plastic moulded chair Plastic Moulded Chair ( 200 ) Technical Specifications Specification Specification Name Values Allowed Values * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 The Dean ACRI 622104, Agricultural College and Research Institute Kudumiyanmlai Pudukkottai 200 15
Drinking Water Cooler
Steel tables Steel Tables ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS: 8126 Latest false - Storage both side one side, both side Total Number of Storage Units four storage single storage, double storage, triple storage, four storage, five storage, six storage Cup Board/Locker type Storage Units two - Type of Storage Units OTHER DESIGNS - Lock on all storage units Provided - Loading capacity of table top in KG ( ±5 Kg) 100 KG - Table Top Material and Thickness (±2 mm) 18 mm thick prelaminated Particle Board (Not as per IS 8126) 20 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, P or F having index 3.2.3 conforming to IS 2046 and minimum 0.5 mm thick balancing laminate on the other 1/4 side, 18 mm thick prelaminated Particle Board (Not as per IS 8126), 20 mm multiplex board, 40 mm multiplex board, 50 mm multiplex board, 25 mm thick MDF Board. Padestal (Under structure) Mild Steel Square Section of outside side minimum 25 mm and wall thickness minimum 1.2 mm Mild Steel Square Section of outside side minimum 25 mm and wall thickness minimum 1.2 mm, Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum (Not as per IS 8126), Mild steel rectangular section of out side minimum 30 mm X 20 mm & Wall thickness minimum 1.2 mm Table Top Length ±10(mm) 1500 900, 1000, 1190, 1300, 1360, 1500, 1660, 1800, 2000, 750 Table Top Width ±10(mm) 900 470, 600, 690, 750, 800, 900, 705, 450 Table Height ±5(mm) 760 710, 735, 760, 840, 850, 860, 750 MATERIAL Foot Rest Material Mild Steel square Section of size 25x25 mm and wall thickness minimum 1.6 mm - Handles Material Corrosion Resistance Metal - Thickness of PVC tape on edges of Table Top banded with the help of hot melt glue (mm) 1.5 mm - Storage Unit and Drawer Units Material 0.7 mm M S sheet 0.6 mm M S Sheet (Not as per IS 8126), 0.7 mm M S sheet, 0.8 mm M S sheet, 0.9 mm m s sheet, 1.0 mm m s sheet, 1.1 mm m s sheet, 1.2 mm m s sheet, 0.5 mm m s sheet Shoes Material PVC - 2/4 DIMENSION Width of Storage Unit ±5(mm) 450 - Depth of Storage Unit ±10(mm) 600 355, 650, 700, 725, 575 Overall Height of Storage Units ±10 mm 510 mm - Height of smallest Storage Compartment Drawer ±3 mm 125 mm - Height of medium size Storage Compartment Drawer ±5 mm 150 mm - Height of Largest Storage Compartment Drawer ±5 mm 140 mm - Width of Locker Cupboard type Storage unit 450 mm 450 mm, 500 mm, 560 mm, N.A, 350 mm Depth of Locker Cupboard type Storage unit 600 mm 600 mm, 650 mm, 700 mm, 725 mm, N.A Height of Locker Cupboard type Storage unit 460 mm - MISC Foot Rest Provided YES - COLOUR & FINISH Colour of Lamination AS PER BUYER CHOICE - Paint Powder coated - Colour of Paint AS PER BUYER CHOICE - CERTIFICATION ISI Marked false true, false BIS Licence No - - Test reports to be furnished to buyer on demand NO YES, NO BIFMA certification NO YES, NO OEM of offered product is ISO 9001:2015 certified NO YES, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified NO YES, NO Green guard certification NO YES, NO WARANTEE WARANTEE PERIOD 1 1, 2, 3, 4, 5 3/4 IN NUMBER OF YEARS * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Jameel Akhtar Khan 481001, Executive Engineer office of PWD Division 01 Balaghat 10 15
OEM Cartridge/Consumable, OEM Cartridge Consumable, OEM Cartridge/Consuma Average Turn Over of Last 3 Years 4 Lakh (s) Experience with Gov. Required 5 Year (s) OEM Cartridge/Consumable ( 1 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand Samsung * Type of Cartridge/Consumable Toner * Colour of Cartridges/Consumable s Black * Ink/Toner/Drum Model number Samsung CLT-K4073S Black Toner Cartridge * Corresponding Part number/code CLT-K4073S/XIP * Printer Model number/numbers for which Cartridge is suitable CLP-326, CLP-320, CLP-3 20N, CLP-325, CLP-325W, CLX-3185, CLX-3185FN, CLX-3185FW, CLX-3185 N * 1/6 Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1500 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mohammad Arshad Baig 226027, GOVERNOR'S SECRETRIAT, RAJ BHAVAN, LUCKNOW, 1 15 OEM Cartridge/Consumable ( 1 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand Samsung * Type of Cartridge/Consumable Toner * Colour of Cartridges/Consumable s Yellow * Ink/Toner/Drum Model number Samsung CLT-Y4073S Yel Toner Cartridge * Corresponding Part number/code CLT-Y4073S/XIP * Printer Model number/numbers for which Cartridge is suitable CLP-326, CLX-3185 N * Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1000 * * Bold specifications are the golden parameters. Consignees and Quantity 2/6 S.No. Consignee Address Quantity Delivery Days 1 Mohammad Arshad Baig 226027, 1 15 OEM Cartridge/Consumable ( 1 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand Samsung * Type of Cartridge/Consumable Toner * Colour of Cartridges/Consumable s Magenta * Ink/Toner/Drum Model number Samsung CLT-M406S Magenta Toner Crtg * Corresponding Part number/code CLT-M406S/XIP * Printer Model number/numbers for which Cartridge is suitable CLP-360, CLP-365, CLP-3 65W, SL-C410W, CLX-33 00, CLX-3305, CLX-3305 W, SL-C460W, SL- C460FW * Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1000 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mohammad Arshad Baig 226027, 1 15 OEM Cartridge/Consumable ( 20 ) Technical Specifications 3/6 * As per GeM Catalogue. Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand HP * Type of Cartridge/Consumable Toner * Colour of Cartridges/Consumable s Black * Ink/Toner/Drum Model number HP 88A Black Original LaserJet Toner Cartridge * Corresponding Part number/code CC388AC * Printer Model number/numbers for which Cartridge is suitable HP LaserJet M1136 MFP Printer, HP LaserJet M1136 MFP Value Bundle, HP LaserJet M1213nf MFP Printer, HP LaserJet M1216nfh MFP Printer, HP LaserJet P1007 Printer, HP LaserJet P1008 Printer, HP LaserJet P1106 Printer, HP LaserJet P1108 Printer, HP LaserJet Pro M1218nfs MFP Printer, HP LaserJet Pro M202dw Printer, HP LaserJet Pro M202n Printer, HP LaserJet Pro MFP M126nw Printer, HP LaserJet Pro MFP M128fn Printer, HP LaserJet Pro MFP M128fw Printer, HP LaserJet Pro MFP M226dn Printer, HP LaserJet Pro MFP M226dw Printer * Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1500 * * Bold specifications are the golden parameters. Consignees and Quantity 4/6 S.No. Consignee Address Quantity Delivery Days 1 Mohammad Arshad Baig 226027, 20 15 OEM Cartridge/Consumable ( 10 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand HP * Type of Cartridge/Consumable Toner * Colour of Cartridges/Consumable s Black * Ink/Toner/Drum Model number HP 12A Black Original LaserJet Toner Cartridge * Corresponding Part number/code Q2612AC * Printer Model number/numbers for which Cartridge is suitable HP Laserjet 1010, HP LaserJet 1012 Printer, HP LaserJet 1015 Printer, HP LaserJet 1020 Plus Printer, HP LaserJet 1020 Printer, HP LaserJet 1022n Printer, HP LaserJet M1005 MFP Printer, HP LaserJet M1319f MFP Printer, HP LJ3050 All-in- One Printer, HP LJ3052 All-in-One Printer, HP LJ3055 All-in-One Printer * Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 2000 * * Bold specifications are the golden parameters. 5/6 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mohammad Arshad Baig 226027, 10 15
library management software Experience with Gov. Required 2 Year (s) Library Management Software ( 1 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values BASIC INFORMATION OF LIBRARY MANAGEMENT SOFTWARE(GOLDEN) Name of Software - * Type of Licensing Perpetual Subscription, Perpetual, Renewal of licence for one year Name of the OEM - * OEM Model/Part No - * Software Description - * Software Version - * Date of Launch of Version - * FEATURES & FUNCTIONALITY PARAMETERS(GOLDEN) Capability to access digital content true true, false Capability to integrate with third party applications true true, false Inbuilt collaboration capability false true, false Barcoding/RFID true true, false 1/6 Digital libraries Management capability true true, false Deployment options In premises In premises, Cloud No of days Training Provided at Site Upto 5 0, Upto 5, 6 to 10, 11 to 20, 21 to 30 Number of Years upto which Support is available from OEM/Franchise online 1 1, 2, 3, 5 FEATURES & FUNCTIONALITY PARAMETERS(GENERIC) Z39 50 support false * Automated cloud backup false * Code thirty-nine barcode support true * Mobile platform support false * Acquisition Management true * Barcode Scanning true * Domain Catalog Management true * Circulation Management true * Fee Collection true * Online Public Access Catalog (OPAC) true * Dynamic Location Tagging true * Integration with Barcode Printer true * Integration with Data Capturing unit true * Integration with biometric true * Report Generation true * Role based access true * Department library lending true * Inter-library lending true * Patron Management true * Periodicals Management true * 2/6 Reserve Shelf Management true * Search Functionality feature true * Self Check-in/Check- Out true * Serials Management true * Kiosk integration true * Unicode compliance true * Library master catalog management true * Multiple search interfaces true * Bulletin boards true * Customizable search interfaces true * Filtered search results true * Users master true * Book master true * Vendor master true * Publisher master true * Location master true * Author master true * Stock master true * Issue & return master true * Track due book records true * Book Report true * Over Due Report true * Stock Report true * Book Purchase Report true * Borrowers Report true * User creation feature true * Assign user rights to different persons true * Maintaining different academic years true * Enable/disable users true * Reset password feature true * Indexing capabilty true * Unique Identifier Tagging capability true * 3/6 Automatic daily backup true * Supported Library Protocols - * SUPPORTED HARDWARE REQUIREMENT PARAMETERS Hard Disk Space Required - * RAM Size required - * Server requirements - * CPU required - * Other Hardware requirements - * Operating Systems supported (Driver) - * Supported Devices - * Supported Servers - * Supported Web browsers - * Supported image file formats - * Supported databases - * Min Processor bench mark score required - * Number of Devices Managed - * GENERIC PARAMETERS OF LIBRARY MANAGEMENT SOFTWARE Free updates and upgrades within support period Yes * Maximum user handling capability - * Concurrent user handling capability - * Valid Licence copy to be provided Yes * Software supplied through Media & URL Link * Installation and Demonstration true * Certifications Benchmarking of Software Products - * List of items included in the package - * Hyper link to Data sheet - * No of Softwares sold 350 * 4/6 Number of User Referance no 1 with in Government Department email, phone no Of concerned authority where Appliance/Software installed 20 * Details of Government Department email, phone no Of concerned authority where Appliance/Software installed for above - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ganesh Kumar 325205, Govt. Girls College Baran Baran Rajasthan 1 15
Classroom tables Classroom Tables ( 200 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Mode of supply Assembled ready to use Assembled ready to use, Knocked down to be assembled at Consigning site by the seller, knocked down to be assembled at consignee site by consignee himself Shape of the table Rectangular Rectangular, Oval, Square, Round Style of table Supported by set of Legs Supported by set of Legs, Supported by pillars, Trestle type (with a plank top & vertical planks on the side), Fixed table supported by single column, Fixed stool supported by pedestal Design of table With four legs and cross leg members With four legs only, With four legs and cross leg members, With four legs and Foot rest ring, With four legs and Foot rest in square shape, With four legs and Foot rest in rectangular shape, 1/5 Other design Loading capacity of table top in KG ( ±5 Kg) 200 kg - Foot Rest Provided YES - Approval of Advance sample (in respect of design) Yes - MATERIAL Table Top Material Ply wood As per GeM Catalogue. All side Beeding on edges of table top 5 mm thick Teak wood - Shoes Material PVC - Padestal (Under structure) MS square pipe of 25 mm with wall thickness of 1.02 mm (18 gauge) Mild Steel Square Section of outside side minimum 25 mm and wall thickness minimum 1.2 mm, Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum, Mild steel rectangular section of out side minimum 30 mm X 20 mm & Wall thickness minimum 1.2 mm, MS square pipe of 25 mm with wall thickness of 1.02 mm (18 gauge), 25 mm x 50 mm (wooden), 50 mm x 50 mm (wooden), N.A Foot Rest Material MS square pipe of 25 mm with wall thickness of 1.02 mm (18 gauge) - Frame material MS square pipe of size 25 mm with wall thickness of 1.02 mm (18 gauge) MS square pipe of size 25 mm with wall thickness of 1.02 mm (18 gauge), MS pipe heavy duty, Stainless steel SS 304, Teak wood, Other wood, No frames Leg material MS square pipe of 25 mm with wall thickness of 1.02 mm (18 gauge) Teak wood, Steel flat SS 304, Steel pipe SS 304, 25 mm MS pipe heavy duty, No leg - supported by external sides 2/5 DIMENSION Table Top Length ±10(mm) 750 mm 700 mm, 750 mm, 800 mm, 850 mm, 900 mm, 950 mm, 1000 mm Table Top Width ±10(mm) 550 mm 470 mm, 500 mm, 525 mm, 550 mm, 575 mm, 600 mm, 625 mm, 650 mm Table Height ±10(mm) 750 mm 700 mm, 725 mm, 775 mm, 825 mm, 850 mm Table top thickness 18 mm 1.2 mm, 1.6 mm, 2 mm, 3 mm, 5 mm, 13 mm, 18 mm, 20 mm, 25 mm, 36 mm MISCELLANEOUS Connecting of leg Only two leg members widthwise and one leg member to adjoining each other - with 100 mm ground clearance Cross type, Adjacent side of leg, Only two leg members widthwise and one leg member to adjoining each other - with 100 mm ground clearance, N.A Number of buffers Four number at bottom - Welding Joint To be smooth finished - Sharp edges to be removed -Free from objectionable projection or irregularities - Top to be fitted By Round head nut and bolt inside the sunmica - Tightend fully and ends of the bolts to be neatly burred over - Number of Bolt 2 bolt in length side and 1 bolt in width side - Size of Bolt 8 mm dia - Placements of Nut and Bolt 37.5 mm inside from each side edges - Iron parts To be without Joint in length - Table placed on even surface Not to wobble - Distance between legs Length of table top (minus 75 mm) x Width of table top (minus 75 mm) - COLOUR & FINISH Table top finish Wenge - 3/5 Paint/Polish synthetic enamel - Colour of Paint As per Buyer's choice - CERTIFICATION Test reports to be furnished to buyer on demand YES - BIFMA certification NO - OEM of offered product is ISO 9001:2015 certified YES - OEM of offered product is ISO 14001:2015 certified YES - OEM of offered product is ISO 18001:2007 certified YES - Green guard certification NO - WARRANTY WARRANTY PERIOD 3-year 1-year, 2-year, 3-year * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Narendra Kumar Rai 313332, Deogarh Road Amet 200 15
chairs-office Chairs-office ( 50 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS 3499 (Part-1) Latest true - Chair Type Without Arms Without Arms Type of Seat and Backrest Padded with Polyurethane Foam Made of Polythene cane, Padded with Polyurethane Foam, moulded plywood, injection moulded Polypropylene, Seat made of padded with polyurethane foam and Backrest made of Mesh with support of injection moulded polypropylene Frame Type 4 Legs Cantilever, 4 Legs Castors Without Without MATERIAL Type of Wood used in Polythene cane Chair NOT APPLICABLE solid wood, teak wood, hot pressed board, plastic net, NOT APPLICABLE Material of Fabric Back Cover leatherite leatherite Thickness of Plywood used in 12 mm 12 mm, 15 mm, 18 mm, 20 mm, 25 mm, 1/4 Backrest IN MM (±1 mm) 30 mm, 35 mm, 40 mm, N.A Frame Material chrome on MS chrome on MS Density of Polyurethane Foam Used in Seat ±2 (Kg/Cub M) 40 Kg/Cub.M - Material of Fabric of Seat Cover fabric fabric Density of Polyurethane Foam Used in Backrest ±2(Kg/Cub M) 32 Kg/Cub.M - Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 30 mm, N.A GSM/Thickness of Fabric ±5 (Gram per Sq Meter) 220 Gram per Sq Meter 80 Gram per Sq Meter, 220 Gram per Sq Meter, 250 Gram per Sq Meter, 290 Gram per Sq Meter, N.A Arm Material NA As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 3 mm) 50 mm 25 mm, 50 mm, 62 mm, 65 mm, 70 mm, N.A, 40 mm Thickness of Polyurethane Foam Used in Seat IN MM (+/- 3 mm) 50 mm 15 mm, 60 mm, 75 mm, 80 mm Shoe Type PVC - DIMENSION Size of Material (mm) 16 gauge tubular pipe 14 SWG 25 mm round pipe, 16 SWG 30 mm round pipe, 2 mm thick 25 mm tube, 40 mm teak wood, 16 gauge tubular pipe Chair Height ±15(mm) 890 mm 700 mm, 750 mm, 800 mm, 830 mm, 850 mm, 890 mm, 950 mm, 1000 mm, 1050 mm, 1100 mm Seat Depth ±10(mm) 500 mm 350 mm, 400 mm, 430 mm, 450 mm, 500 mm, 550 mm, 580 mm, 600 mm, 650 mm, 720 mm Seat Width ±10 (mm) 470 mm 350 mm, 380 mm, 470 mm, 2/4 550 mm, 650 mm Seat Height IN MM ±5(mm) 500 400, 430, 460, 480, 500, 380 Backrest Width ±10(mm) 500 mm 350 mm, 480 mm Backrest Height ±10(mm) 300 mm As per GeM Catalogue. Arm Length ±5(mm) N.A 200 mm, 250 mm, 300 mm, 350 mm, 490 mm Arm Width ±2(mm) N.A 25 mm, N.A COLOUR & FINISH Colour of Fabric for Seat and Backrest blue - Paint Type chrome chrome, epoxy polyster, polished, synthetic enamel, powder coated on MS, N.A Colour of Paint white - CERTIFICATION Polythene cane conforming to Type-1 of IS 5378/1994 NA - Test reports to be furnished to buyer on demand NO YES, NO BIFMA certification NO YES, NO OEM of offered product is ISO 9001:2015 certified NO YES, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified NO YES, NO WARRANTY Warranty period in number of years 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 3/4 1 Narendra Kumar Rai 313332, Deogarh Road Amet 50 15
Printer or photo Copier Paper Experience with Gov. Required 5 Year (s) Printer Or Photo Copier Paper ( 100 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 14490 : Latest Yes * Test Method as per IS: 1060 Yes * Size Size and Dimension of The Paper (W X L) in mm 210 x 297 210 x 297, 297 X 420 Size of the Paper A4 A4 GSM of Paper 75 75 Quantity Number of Sheets per Ream 500 500 (or higher) Physical Characteristics Brightness in % 85 80-95 Tensile Index MD in Nm/g 42 * Tensile Index CD in Nm/g 30 * Opacity in % 90 * 1/2 Tear Index (Avg) in Nm.m²/g 5 * Smoothness for both sides (Bendtsen) in ml/min 200 * Thickness in µm 100 * Moisture in % 5 * Stiffness MD 3 * Stiffness CD 2 * Surface Strength Dennison (Wax Pick) >= 12 A 11 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Baboo Lal Bairwa 303503, Rajesh pilot govt.college shyampura road lalsot 100 15
hopper or tipper Average Turn Over of Last 3 Years 100 Lakh (s) Experience with Gov. Required 3 Year (s) Hopper Or Tipper ( 375 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Box body Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, - Main Engine Capacity (cc) 1396 - Make of Chassis - - Type of Chassis Frame - - Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) 1/6 Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 18 Speed, Max (Km/Hr) 80 - Main Engine Aspiration Turbocharged Intercooled Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 4 Fuel Tank Capacity (Ltrs) 38 Gradeability of Vehicle with load( %) 24.93 - Gradeability of Vehicle without load ( %) 25.2 - Ground Clearance (mm) 160 Wheel Base (mm) 2380 - Kerb Weight (Kg) 1100 Gross Vehicle Weight (Kg) 2255 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - - Type of Front Axle and Suspension System - - Type of Rear Axle and Suspension System - - Type of BIS MARKED Vehicle Tyre Radial - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 5 - Type of Steering Power Operated Manual, Power Operated Turning Radius, Min (mm) 5100 Speed Governers yes - 2/6 ABS Fitted No - Front Vehicle Brake - - Rear Vehicle Brake - - Type of Clutch - - Tipping Angle (Degree) 48 Tipper Container cap acity/Volume(cubic metres) 3.2 Certification Chassis Certification ARAI/VRDE/ICAT No. - - Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 15 - No. Of Free Service (Nos) 3 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 4340 - Width of Chassis (mm) 1594 - Height of Chassis (mm) 1858 - Size Of Front Tyres (mm) - - Size Of Rear Tyres (mm) - - Size of Wheel (mm) 14 Tipper body Pivot length (mm) 1546 - Tipper body Length (mm) 2695 - Tipper Body Height (mm) 1082 - Overall Height of Tipper from Ground (mm) 1801 - Body Plate Thickness (mm) 2 Main Frame Thickness (mm) 4 Pneumatic System false - Hydarulic System true - 3/6 Tipping Hydraulic Cylinders(Make) - - Hydraulic System Driven by Main Engine - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - Auxiliary Diesel Engine Transmission - - Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Dumping Height (mm) 551 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 4/6 1 Bhushan Poddar 800001, Patna Municipal Corporation, C-Block, Maurya Lok Complex, Buddha Marg 375 30
Multifunction Machines
hospital pillow covers or pillowcases Hospital Pillow Covers Or Pillowcases ( 1000 ) Technical Specifications Specification Specification Name Values Allowed Values SPECIFICATION Conforming to Joint Services Specification (JSS) JSS: 7210-13 Oct. 1984 (Revision 1) (Except sheeting fabric) - DIMENSIONS Length 750 - Width 450 - Depth of Inner flap 150 - MATERIAL Sheeting fabric 100 % cotton fabric white (bleached) with plain weave (Conforming to IS 175:1989: Latest (Variety No.4)) - Ends/dm of sheeting fabric 260 - Picks/dm of sheeting fabric 230 - Mass of sheeting fabric (gm per sq.m) 145 - STITCHING Sewing Cotton sewing thread (16 Tex X 6) white - Stitch Lock - TEST REPORT Availability of Test Report from NABL/ILAC accredited or Central YES - 1/2 Government Lab to prove conformity of products to the specification Test reports to be furnished to buyer on demand YES - Name of the Lab na - Address of The Lab na - Test Report No. na - Test Report Date na - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Surendra Kumar Azad 492001, Dr. Bhim Rao Ambedkar Hospital, Jail Road, Raipur Chhattisgarh 1000 15
domestic soup or salad bowls Domestic Soup Or Salad Bowls ( 30 ) Technical Specifications Specification Specification Name Values Allowed Values shape, design and colour Shape Round Bowl Round Bowl, Squar Bowl, Hemispherical Bowl Artistic design Pattern, Logo Without With, Without Colour Transparent As per GeM Catalogue. Material Raw Materials Food Grade - Material of the Bowls Bone China Bone China, Ceramic, Porcelain, Glass, Melamine Plastic, Microwave safe Plastic, Stainless Steel AISI 304, Acrylic Dimension Length of Bowl (mm) 110 As per GeM Catalogue. Width of Bowl (mm) 50 As per GeM Catalogue. Height of Bowl (mm) 50 As per GeM Catalogue. Capacity of Bowl (ml) 150 As per GeM Catalogue. Weight of Bowl (gm) 50 As per GeM Catalogue. performance Suitable for microwave oven true - Suitable for heating on direct flame true - 1/3 Recommended max. Temperate for safe use. (Upto deg;C) 80 As per GeM Catalogue. * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Anil Kumar N 131305, BHAGAT PHOOL SINGH MAHILA VISHWAVIDYALAYA, KHANPUR KALAN 30 15
bar code printer Bar Code Printer ( 1 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Specification Type Desktop Desktop, Portable/Hand Held Printing Technology Thermal Transfer & Direct Thermal both Thermal Transfer & Direct Thermal both Resolution (dpi) 203 203 Print Speed (mm/sec.) 127 50-999 Maximum Print Width (mm) 108 Any applicable numeric value Maximum Print length (mm) 990 * Media Type Roll-fed or fan-fed, die cut or continuous direct thermal labels with or without black mark, tag stock, continuous receipt paper, wristbands, and optional liner-free direct thermal media * Media Form Roll * 1/4 Media Width (mm) 114 * Media Length (mm) 900 * Media Thickness (mm) 0.18 * Maximum Media Roll Diameter (mm) 127 * Media Core Diameter (mm) 38 * Ribbon Length (mm) 300000 * Ribbon Width (mm) 110 * Ribbon Capacity 300 * Processor (bits) 32 * RAM Size (MB) 8 Any applicable numeric value Compatible Barcode Symbologies (Linear, PDF-417, Maxicodes, etc) "Bar Code Symbologies • Bar Code Ratios: 2:1 (non-rotated) and 3:1 • Linear Bar Codes: Codabar, Code 11 (ZPL), Code 128, Code 39, Code 93, EAN-13, EAN-8, EAN-14 (ZPL), German Post Code (EPL), Industrial 2-of-5 (ZPL), Interleaved 2-of-5, Japanese Postnet (EPL), ISBT-128 (ZPL), Logmars (ZPL), MSI, Plessey, Postnet, GS1 DataBar (RSS-14), Standard 2-of-5 (ZPL), UCC/EAN-128 (EPL), UPC and EAN 2 or 5 digit extensions (ZPL), UPC-A, UPC-A and UPC- E with EAN 2 or 5 digit extensions, UPC-E, and GS1 Databar (formerly RSS) • 2-Dimensional: Codablock (ZPL), Code 49 (ZPL), Data Matrix, MaxiCode, QR Code, PDF417, MicroPDF417, Aztec" * USB 2.0 Available * USB 3.0 Not-Available * Serial Port Available * Parallel Port Not-Available * Bluetooth Not-Available * 2/4 Ethernet Port Not-Available * Wi-Fi Connectivity Not Available * Type of Wi-Fi Connectivity NA * Energy Star Rating Yes * BIS Registration under CRS of Meity Yes * BIS Registration no. - * Overall Dimensions (LxWxH) (mm x mm x mm) 7.25" (184 mm) X 7.75" ( 197 mm) X 10.75" (273 mm) * Net Weight (Kg) 2.63 * Power supply 230V, 50 Hz * If battery Operated, Battery Capacity (mAH) NA * Maximum Power consumption (Watt) 50 * Operating Temperature Range (Degree C) 5ºC to 41ºC * Operating Humidity (%RH) 10% to 90% * Safety Certifications BIS * Availability of Test Reports from Central Govt/NABL/ILAC accredited Lab showing conformity to the specifications Yes * If Yes, Test Report Number - * Test Report Date - * Name of Test Lab - * Address of the Test Lab - * Free installation and demonstration Yes * On Site OEM Warranty (Year) 1 1, 2, 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Seema Gaur 311001, Main Sector, Kashipuri, Shastri Nagar, 1 15 3/4 Bhilwara, Rajasthan 311001
plastic buckets Plastic Buckets ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conformity to Indian Standard IS: 3730 latest - ISI Marked false true, false Yes is better BIS License No. (CML No.) NA - Test Report Details Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification No Yes, No Test Report Number & Date NA - Name & address of the Lab NA - Material Bucket body Material Natural HDPE Natural HDPE, Coloured HDPE HDPE Grade 54 MA (as per IS: 7328-1974) - Handle Material HDPE - Food Grade quality material true true, false Yes is better Capacity Capacity (Ltrs) 20 As per GeM Catalogue. 1/3 Physical Characteristics Colour AS PER DEMAND - UV Resistant true true, false Yes is better Lid Without With, Without Shape ( when viewed from top) Round - Weight of Bucket (grams) 750 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Anil Kumar N 131305, BHAGAT PHOOL SINGH MAHILA VISHWAVIDYALAYA, KHANPUR KALAN 10 15
Domestic Blenders/Dough Kneader
Potable water purification system Average Turn Over of Last 3 Years 1 Lakh (s) Experience with Gov. Required 2 Year (s) Potable Water Purification System ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values EQUIPMENT TYPE & FEATURES Type Electrically Operated Reverse Osmosis based water purifier Electrically Operated Reverse Osmosis based water purifier, Gravity operated water purifier, Water Purifier electro- deionization Based Ultraviolet (UV) LAMP Yes Yes, No Ultra Voilet (UV) Lamp power consumption 18 - STANDARDS Conformity to Indian Standrad for System IS 14724 (latest) for water purification system with Ultraviolet disinfection - Number of float valves/sensors 3 INPUT PARAMETERS Input Water TDS 2000 2000 OUTPUT PARAMETERS Recovery at 27 degree Centigrade 25-35 25-35, 30-40, 90-100, 70-80, 50-60 Output Water of RO system Conforming to Indian Standard IS 10500(latest) - 1/3 Output water capacity (Litre/Hour): 50 50 Arsenic and Floride removal capability true true, false Yes is better Misc, warranty etc Thin-film composite membrane Yes Yes, No, NA High Pressure Pump Yes - Raw water/Chemical Raw water/Chemical Cleaning PUMP Yes Yes, No Pre Filter Vessels: Yes Yes, No Micron Filter Yes Yes, No Membrane Housing Yes Yes, NA Auto cut Yes Yes, No No of candles (Nos) 5 Installation Type Wall mounted Wall mounted Warranty period ( for free replacement of machine 3 2, 3, 1 Higher is better Warranty Period (for scope including free of cost candle and activated carbon onsite replacement twice a year) 3 2, 1 Higher is better Antiscalant- where silica is up to 100 ppm/where Mica is up to 100 ppm Yes Yes, NA Chloride & Flouride removal facility Yes with Pump Yes with Pump Test Report Availability of type test report(Design Evalution Reports) as per IS:14724 and IS 10500 - - Test certificate No and date: - - Name and Address of laboratory which conducted Test: - - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 2/3 1 Rajendra Prasad Mali 305404, GOVERNMENT COLLEGE, KEKRI, AJMER ROAD, KEKRI (AJMER) 2 15
Classroom tables Classroom Tables ( 100 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Mode of supply Assembled ready to use Assembled ready to use, Knocked down to be assembled at Consigning site by the seller, knocked down to be assembled at consignee site by consignee himself Shape of the table Rectangular Rectangular, Oval, Square, Round Style of table Supported by set of Legs Supported by set of Legs, Supported by pillars, Trestle type (with a plank top & vertical planks on the side), Fixed table supported by single column, Fixed stool supported by pedestal Design of table With four legs and Foot rest in rectangular shape With four legs only, With four legs and cross leg members, With four legs and Foot rest ring, With four 1/5 legs and Foot rest in square shape, With four legs and Foot rest in rectangular shape, Other design Loading capacity of table top in KG ( ±5 Kg) 200 kg * Foot Rest Provided YES * Approval of Advance sample (in respect of design) Yes * MATERIAL Table Top Material Prelaminated Particle Board * All side Beeding on edges of table top 5 mm thick Teak wood * Shoes Material Rubber * Padestal (Under structure) MS square pipe of 25 mm with wall thickness of 1.02 mm (18 gauge) Mild Steel Square Section of outside side minimum 25 mm and wall thickness minimum 1.2 mm, Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum, Mild steel rectangular section of out side minimum 30 mm X 20 mm & Wall thickness minimum 1.2 mm, MS square pipe of 25 mm with wall thickness of 1.02 mm (18 gauge), 25 mm x 50 mm (wooden), 50 mm x 50 mm (wooden), N.A Foot Rest Material MS square pipe of 25 mm with wall thickness of 1.02 mm (18 gauge) * Frame material MS square pipe of size 25 mm with wall thickness of 1.02 mm (18 gauge) MS square pipe of size 25 mm with wall thickness of 1.02 mm (18 gauge), MS pipe heavy duty, Stainless steel SS 304, Teak wood, Other wood, No frames Leg material MS square pipe of 25 mm with wall thickness of 1.02 mm (18 gauge) Teak wood, Steel flat SS 304, Steel pipe SS 304, 25 mm MS pipe heavy duty, MS square pipe 2/5 of 25 mm with wall thickness of 1.02 mm (18 gauge), No leg - supported by external sides DIMENSION Table Top Length ±10(mm) 700 mm 700 mm, 750 mm, 800 mm, 850 mm, 900 mm, 950 mm, 1000 mm Table Top Width ±10(mm) 470 mm 470 mm, 500 mm, 525 mm, 550 mm, 575 mm, 600 mm, 625 mm, 650 mm Table Height ±10(mm) 750 mm 700 mm, 725 mm, 775 mm, 825 mm, 850 mm Table top thickness 18 mm 1.2 mm, 1.6 mm, 2 mm, 3 mm, 5 mm, 13 mm, 18 mm, 20 mm, 25 mm, 36 mm MISCELLANEOUS Connecting of leg Adjacent side of leg Cross type, Adjacent side of leg, Only two leg members widthwise and one leg member to adjoining each other - with 100 mm ground clearance, N.A Number of buffers Four number at bottom * Welding Joint N.A * Top to be fitted By Round head nut and bolt inside the sunmica - Tightend fully and ends of the bolts to be neatly burred over * Number of Bolt 2 bolt in length side and 1 bolt in width side * Size of Bolt 6 mm dia * Placements of Nut and Bolt 37.5 mm inside from each side edges * Iron parts N.A * Table placed on even surface Not to wobble * Distance between legs Length of table top (minus 75 mm) x Width of table top (minus 75 mm) * COLOUR & FINISH Table top finish As per Buyer's choice * Paint/Polish synthetic enamel * 3/5 Colour of Paint As per Buyer's choice * CERTIFICATION Test reports to be furnished to buyer on demand YES * BIFMA certification NO * OEM of offered product is ISO 9001:2015 certified NO * OEM of offered product is ISO 14001:2015 certified NO * OEM of offered product is ISO 18001:2007 certified NO * Green guard certification NO * WARRANTY WARRANTY PERIOD 2-year 1-year, 2-year, 3-year * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Seema Gaur 311001, Main Sector, Kashipuri, Shastri Nagar, Bhilwara, Rajasthan 311001 100 15