Loading
Loading…
Loading…
2,847 results • Latest
Classroom tables Classroom Tables ( 100 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Mode of supply Assembled ready to use Assembled ready to use, Knocked down to be assembled at Consigning site by the seller, knocked down to be assembled at consignee site by consignee himself Shape of the table Rectangular Rectangular, Oval, Square, Round Style of table Supported by set of Legs Supported by set of Legs, Supported by pillars, Trestle type (with a plank top & vertical planks on the side), Fixed table supported by single column, Fixed stool supported by pedestal Design of table With four legs and Foot rest in rectangular shape With four legs only, With four legs and cross leg members, With four legs and Foot rest ring, With four 1/5 legs and Foot rest in square shape, With four legs and Foot rest in rectangular shape, Other design Loading capacity of table top in KG ( ±5 Kg) 200 kg * Foot Rest Provided YES * Approval of Advance sample (in respect of design) Yes * MATERIAL Table Top Material Prelaminated Particle Board * All side Beeding on edges of table top 5 mm thick Teak wood * Shoes Material Rubber * Padestal (Under structure) MS square pipe of 25 mm with wall thickness of 1.02 mm (18 gauge) Mild Steel Square Section of outside side minimum 25 mm and wall thickness minimum 1.2 mm, Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum, Mild steel rectangular section of out side minimum 30 mm X 20 mm & Wall thickness minimum 1.2 mm, MS square pipe of 25 mm with wall thickness of 1.02 mm (18 gauge), 25 mm x 50 mm (wooden), 50 mm x 50 mm (wooden), N.A Foot Rest Material MS square pipe of 25 mm with wall thickness of 1.02 mm (18 gauge) * Frame material MS square pipe of size 25 mm with wall thickness of 1.02 mm (18 gauge) MS square pipe of size 25 mm with wall thickness of 1.02 mm (18 gauge), MS pipe heavy duty, Stainless steel SS 304, Teak wood, Other wood, No frames Leg material MS square pipe of 25 mm with wall thickness of 1.02 mm (18 gauge) Teak wood, Steel flat SS 304, Steel pipe SS 304, 25 mm MS pipe heavy duty, MS square pipe 2/5 of 25 mm with wall thickness of 1.02 mm (18 gauge), No leg - supported by external sides DIMENSION Table Top Length ±10(mm) 700 mm 700 mm, 750 mm, 800 mm, 850 mm, 900 mm, 950 mm, 1000 mm Table Top Width ±10(mm) 470 mm 470 mm, 500 mm, 525 mm, 550 mm, 575 mm, 600 mm, 625 mm, 650 mm Table Height ±10(mm) 750 mm 700 mm, 725 mm, 775 mm, 825 mm, 850 mm Table top thickness 18 mm 1.2 mm, 1.6 mm, 2 mm, 3 mm, 5 mm, 13 mm, 18 mm, 20 mm, 25 mm, 36 mm MISCELLANEOUS Connecting of leg Adjacent side of leg Cross type, Adjacent side of leg, Only two leg members widthwise and one leg member to adjoining each other - with 100 mm ground clearance, N.A Number of buffers Four number at bottom * Welding Joint N.A * Top to be fitted By Round head nut and bolt inside the sunmica - Tightend fully and ends of the bolts to be neatly burred over * Number of Bolt 2 bolt in length side and 1 bolt in width side * Size of Bolt 6 mm dia * Placements of Nut and Bolt 37.5 mm inside from each side edges * Iron parts N.A * Table placed on even surface Not to wobble * Distance between legs Length of table top (minus 75 mm) x Width of table top (minus 75 mm) * COLOUR & FINISH Table top finish As per Buyer's choice * Paint/Polish synthetic enamel * 3/5 Colour of Paint As per Buyer's choice * CERTIFICATION Test reports to be furnished to buyer on demand YES * BIFMA certification NO * OEM of offered product is ISO 9001:2015 certified NO * OEM of offered product is ISO 14001:2015 certified NO * OEM of offered product is ISO 18001:2007 certified NO * Green guard certification NO * WARRANTY WARRANTY PERIOD 2-year 1-year, 2-year, 3-year * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Seema Gaur 311001, Main Sector, Kashipuri, Shastri Nagar, Bhilwara, Rajasthan 311001 100 15
personal safety kit reflective luminous garments Personal Safety Kit Reflective Luminous Garments ( 10000 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Conformity to EN Standard EN:471-2003 + A1:2007 * This garment as per the specification Yes * Reflective Luminous Garments High visibility warning garments with synthetic slide fasteners High visibility warning garments with synthetic slide fasteners, High visibility warning garments with synthetic hook and loop fasteners Type of garment Jacket Waist coat, Jacket, Harness Drawing for Reflective Luminous Garments http:/www.dgserver.dg snd.gov.in/rc/46161712 .pdf * Drawing seen and understood Yes * CONSTRUCTIONAL Size Medium(M) (Suitable for person of height 161-168 cm, Chest Small (S) ( Suitable for person of height 152-160 cm, Chest 1/6 Girth 103-107 cm, Waist Girth 82-86 cm) Girth 96-102 cm, Waist Girth 76-81cm), Medium(M) (Suitable for person of height 161-168 cm, Chest Girth 103-107 cm, Waist Girth 82-86 cm), Large(L) ( Suitable for person of height 169-175 cm, Chest Girth 108-112 cm, Waist Girth 87-91 cm), Extra Large(XL) ( Suitable for person of height 176-183 cm, Chest Girth 113-117 cm, Waist Girth 92-97 cm) Garment color Flourescent orange-red (for Essential Service ) * BASIC CLOTH Yes * The overall blend composition as per IS : 3416:1988 Polyester 65 +/- 3 % and Cotton 35% * SEWING THREAD 100% Spun Polyester 3 ply sewing thread of matching colour of best trade quality shall be used for stitching. * Fabrication fabrication of jacket as per drawing and specification fabrication of jacket as per drawing and specification, fabrication of waist coat as per drawing and specification, Fabrication of Harness: As per drawing and specification Total area of back ground material front plus back as per EN 471:2003 (sq. mtr) 0.8/0.5 * There shall be no joints at face and back of the garment either on background material or on Reflective material. Yes * Width of retro reflective material for all types of garments (mm) 75 * Patch pocket true * Patch pocket 15 x 15 * 2/6 Confirmity to EN Standard size (cm) Piping shall be given using self material of background cloth Yes * Ends per inch and picks per inch of background material 3 * Area of back ground material for front/back side (%) 50/50 * Area of retro reflective material - front/back side (%) 50/50 * Total Area of retro reflective material front back as per EN 471:2003 (sq. mtr) 0.20/0.13 * Back ground material front plus back as per EN 471:2003 (sq. mtr) Total Area. 0.8/0.5 * Retro reflective tape Micro prismatic type, white or silver colour certified by the manufacturer of retro reflective material.The retro reflective material should be certified by the manufacturer to withstand 75 wash cycles @ 60 degree C and for Temperature Variation test. * FASTENERS for High visibility warning garments with synthetic slide fasters: For Jacket & Waist Coat the same shall be Heavy Open ended flat auto lock type. Yes * Fastner- Hook and Loop, Tape - 50mm wide as per IS : 8156(RA 2004) and drawing Yes * Marking General Marking : Each piece of warning garment shall be marked by providing a Cloth Label attached Yes * 3/6 affixed to the garment. The label shall be visible, legible and durable up to 75 cycles of washing. The marking shall be in black on white background either woven or printed. Specific Marking Name or trade mark of the manufacturer, Desig nation of the product, Class, Size of Garment Level of performance and Specification No. * Marking of departmental identification true * Marking required as per user department choice true * Marking depaertmental identifications (micro prismatic material) for back (cm) 20 x 15 * Marking departmental identifications (micro prismatic material) in case of coverall, bib and brtaze trouser (cm) 30 x 5 * Marking depaertmental identifications (micro prismatic material) for front (cm) 15 x 5 * PERFORMANCE HIGH GLOW RETROREFLECTIVE MATERIAL Micro prismatic material of 50 mm wide Band of new material conforming to EN 471-2003 + A1:2007 shall be used. The supply shall confirm to the requirements of Level 2 of separate performance material confirming to Table 4 of EN471:2003 +A1:2007 * The garment shall provide 360 degree visibility Yes * Chromaticity co- ordinates and luminous factor of background material as per table 2 of EN 471-2003 Yes * 4/6 Chromaticity co- ordinates and luminous factor of background material after exposure to xenon arc lamp as per table 2 of EN 471-2003 Yes * PACKAGING Packing Each piece will be packed in Button down Poly bags of 200 GSM and 50 such pieces to be packed in corrugated Carton boxes of 6 ply with 160 GSM top duplex board * CERTIFICATION Care labeling Yes * Manufacturers test certificate for synthetic (Plastic) slide fastners or synthetic hook and loop fastners used in the garment shall be provided to buyer on demand. Yes * Manufactures test report for reflective material used for printing of departmental identity to specification no. EN 13356-2001 High Visibility accessories for non professinal use shall be provided to buyer on demand. Yes * Test certificate of Retro Reflective tapes certified by the manufacturer or any International Laboratory certifying that the reflective tape confirms to EN 471-2003+A1:2007 shall be provided to buyer on demand. Test certificate should specifically mention about the batch/Lot number and manufacturers marking and product code on it. Yes * Test reports to be provided to buyer on Yes * 5/6 demand Purchase document for co-relating the luminous material and Background Material used in the manufacturing of the supply shall be maintained by manufacturer and same shall be provided to buyer on demand. Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rohit Saxena 261001, Office of District Panchayat Raj Officer Room No. 114, 2nd Floor, Vikash Bhawan 10000 15
Hearing Aid ( PAC Only ) Hearing Aid ( 25 ) ( Under PAC ) Make starkey Model behindtheear(bte)hearingaidstarkey-aries Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL FEATURES Technology Digital circuit Digital circuit Type Behind the ear (BTE) * Number of hearing channels 3 3 Full-on Gain (FOG) 0dB to 110 dB * Volume control true * Program button true * Switch (Body worn) false * Fitting range 30dB to 120dB * Frequency range 250Hz to 8KHz * Frequency compression true * Single shield hearing true * O-T-M switch false * 1/4 Activation/deactivation selection of N-H trimmer false * Fitting bandwidth true * Reference test gain 30 dB to 120 dB * Total Harmonic Distortion =<10dB * Feedback cancellation Yes * Tinnitus masking false * True ISP Platform true * Wireless connectivity false * True input technology true * Fixed directional microphone Yes * Basic Sensogramme Yes * Manual Acclimatization Yes * Should consistently work in all weather conditions Yes * SOUND RECEIVER Receiver type (0 to 115 dB) P S, M, P, HP Transient Noise reduction Yes * Wind noise reduction Yes * Spatial sound management Yes * AMPLIFIER Amplifier type Digital Digital, Analog Input noise level 5dB to 100dB * Sound boost available false * ELECTRICAL FEATURES Compatible battery provided Yes * Battery consumption 1.4mA * Battery Life (hrs) 50 to 275 * Low battery indicator true * Rechargeable battery false true, false Blue tooth transmitterBlue tooth transmitter false true, false PACKING Packing kit contains Product operating manual, warranty card, Hearing Aid, Yes * 2/4 Dehumidifier, Cleaning brush, Cleaning cloth, Battery and carrying box Packing Individually packed * STANDARD Conformity to standard BIS * BIS Licence Number (CM/L Number) 4100008257 * CERTIFICATIONS & REPORTS Submission of Test Report from Central Government/NABL/ILAC accredited Lab to prove the conformity to declared specification at the time of supply Yes * Certification Available ISO * Submission of all the certifications to the buyer along with supplies on demand Yes * WARRANTY Warranty (Months) 36 36, 48, 60 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Chandrashekhar Vishnoi 470661, ROOM NO. 6, 7, 8 COLLECTOR OFFICE DAMOH 25 15
classroom chairs Classroom Chairs ( 150 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Chair Type Without Arms Without Arms Type of Seat and Backrest Made of Wood * Depth of Seat in mm (+/- 10 mm) 440 * Height of Seat in mm (+/- 10 mm) 460 * Width of Seat in mm (+/- 10 mm) 420 * Overall Chair Height in mm (+/- 10 mm) 950 * SEAT DETAILS Thickness of Cushion Used in Seat in mm (+/- 2 mm) No Cushion * Density of Cushion Used in Seat (Kg/Cubic Metre) No Cushion * Material of Fabric of Seat Cover No Cusihion No Cover * BACKREST DETAILS Density of Cusion Used No Cushion * 1/3 in Backrest (Kg/Cubic Metre) Thickness of Cushion in Backrest in mm (+/- 2 mm) No Cushion * Material of Fabric of Backrest Cover No ciushion no cover * Width of Backrest (mm) 410 * Height of Backrest (mm) 460 * SUPPORT/UNDER STRUCTURE Frame Material any other wood of minimum 35 mm thickness * Under Storage provided below the Seat NO * Material of under storage NA * Length of Under Storage (mm) NA * Width of Under Storage (mm) NA * DEPTH of Under Storage (mm) NA * WRITING PAD DETAILS Writing Pad Material N.A * Writing Pad Size (Length X Width in mm) NA * MISC Colour of Fabric for Seat and Backrest No Fabric * Finishing of Structure Melamine finish/Polish * WARRANTY Warranty period in number of years 2 1, 2, 3, 4, 5 CERTIFICATION Test reports to be furnished to buyer on demand NO * Product having BIFMA certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified NO YES, NO * Bold specifications are the golden parameters. 2/3 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Seema Gaur 311001, Main Sector, Kashipuri, Shastri Nagar, Bhilwara, Rajasthan 311001 150 15
classroom chairs Experience with Gov. Required 5 Year (s) Classroom Chairs ( 200 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Chair Type Without Arms Without Arms Type of Seat and Backrest 18 mm thick prelaminated Particle Board As per GeM Catalogue. Depth of Seat in mm (+/- 10 mm) 400 - Height of Seat in mm (+/- 10 mm) 440 - Width of Seat in mm (+/- 10 mm) 400 - Overall Chair Height in mm (+/- 10 mm) 750 - SEAT DETAILS Thickness of Cushion Used in Seat in mm (+/- 2 mm) No Cushion - Density of Cushion Used in Seat (Kg/Cubic Metre) No Cushion - Material of Fabric of Seat Cover No Cusihion No Cover - BACKREST DETAILS Density of Cusion Used in Backrest (Kg/Cubic Metre) No Cushion - 1/3 Thickness of Cushion in Backrest in mm (+/- 2 mm) No Cushion - Material of Fabric of Backrest Cover No ciushion no cover - Width of Backrest (mm) 400 - Height of Backrest (mm) 150 - SUPPORT/UNDER STRUCTURE Frame Material Mild Steel square Section of size 25x25 mm and wall thickness minimum 1.6 mm As per GeM Catalogue. Under Storage provided below the Seat NO - Material of under storage NA - Length of Under Storage (mm) NA - Width of Under Storage (mm) NA - DEPTH of Under Storage (mm) NA - WRITING PAD DETAILS Writing Pad Material N.A - Writing Pad Size (Length X Width in mm) NA - MISC Colour of Fabric for Seat and Backrest brown - Finishing of Structure Stove enameled Paint - WARRANTY Warranty period in number of years 1 1, 2, 3, 4, 5 CERTIFICATION Test reports to be furnished to buyer on demand NO - Product having BIFMA certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO * Bold specifications are the golden parameters. Consignees and Quantity 2/3 S.No. Consignee Address Quantity Delivery Days 1 Baboo lal Bairwa 303503, Rajesh pilot govt.college shyampura road lalsot 200 15
hopper or tipper Hopper Or Tipper ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, - Main Engine Capacity (cc) 793 - Make of Chassis - - Type of Chassis Frame - - Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) Fuel Consumption ( declared by OEM as certified by Test 22.07 22.07 1/5 Agency under Rule 115of CMVR 1989) (Ltr/Hr) Speed, Max (Km/Hr) 80 - Max Engine Power BHP (BHP@rpm) 32.18 Max Engine Torque (N-M@rpm) 75 Main Engine Aspiration Turbocharged Natural Aspiration, Turbocharged, Supercharged, Turbocharged+ Supercharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 2 Fuel Tank Capacity (Ltrs) 30 30.0 Gradeability of Vehicle with load( %) 34 - Gradeability of Vehicle without load ( %) 34 - Ground Clearance (mm) 175 Wheel Base (mm) 2110 - Kerb Weight (Kg) 860 Gross Vehicle Weight (Kg) 1600 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - - Type of Front Axle and Suspension System - - Type of Rear Axle and Suspension System - - Type of BIS MARKED Vehicle Tyre Radial - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 5 - Type of Steering Manual Manual, Power Operated 2/5 Turning Radius, Min (mm) 4300 Speed Governers yes - ABS Fitted No - Front Vehicle Brake - - Rear Vehicle Brake - - Type of Clutch - - Tipping Angle (Degree) 48 Tipper Container cap acity/Volume(cubic metres) 1.8 Certification Chassis Certification ARAI/VRDE/ICAT No. - - Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 24 - No. Of Free Service (Nos) 4 - Battery Warranty (Months) 24 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3800 - Width of Chassis (mm) 1562 - Height of Chassis (mm) 1883 - Size Of Front Tyres (mm) - - Size Of Rear Tyres (mm) - - Size of Wheel (mm) 330.2 Tipper body Pivot length (mm) 1546 - Tipper body Length (mm) 2165 - Tipper Body Height (mm) 672 - Overall Height of Tipper from Ground (mm) 1491 - Body Plate Thickness (mm) 1.6 Main Frame 4 3/5 Thickness (mm) Pneumatic System true - Hydarulic System true - Tipping Hydraulic Cylinders(Make) - - Hydraulic System Driven by Power Pack Unit - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - If Yes Auxiliary Diesel Power (HP@rpm) 0 Auxiliary Diesel Engine Transmission - - Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Steel, Aluminium, Chromium Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 1.6 Dumping Height (mm) 365 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - 4/5 Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Raman Bagde 480106, Office Of the Municipal Council Sausar Tah Sausar Distt Chhindwara MP 2 15
Class Room Desking and Seating Class Room Desking And Seating ( 100 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values GENERIC TYPE OF DESKING ONLY TABLE/DESK ONLY TABLE/DESK, ONLY SEATING, INTEGRATED DESK CUM SEATING, INTEGRATED DESK CUM SEATING WITH SHELF/STORAGE UNDER DESK, ONLY TABLE/DESK WITH SHELF/STORAGE UNDER DESK Desking Configuration TWO SEATER SINGLE SEATER, TWO SEATER, THREE SEATER, FOUR SEATER Length of Desking, Seating and Backrest (if provided) in mm (±10 mm) 900 * DESK/BENCH SPECIFICATIONS Material of Desk Top +/- 2 mm (For shelf storage +/- 4 mm) 18mm thick Other wood * 1/3 Material of Support Structure or Side Pannel Mild Steel Square Section of outside side minimum 25 mm and wall thickness minimum 1.2 mm * Height of Desk Top in mm (±5 mm) 750 * Width of Desk Top in mm (± 5 mm) 450 * SEATING SPECIFICATION Material of Seat and Backrest (if provided) (+/- 2 mm (For back rest +/- 4 mm) ONLY DESK NO SEATING * Material of Support Structure ONLY DESK NO SEATING * Material of Seat Cushion ONLY DESK NO SEATING 40 mm thick PU foam of density 40 gram per cubic cm, WITHOUT CUSHION, ONLY DESK NO SEATING Width of Seating in mm (±10 mm) ONLY DESK NO SEATING * Height of Seat in mm (±10 mm) ONLY DESK NO SEATING * Width of backrest if provided in mm (± 5 mm) No Backrest * Back Support for Seating of Same materail as Seating back support not provided Provided with Cushion, Provided without cushion, back support not provided MISC DESIGN AS PER DGS&D drawing No DQA/GE/RC -208/Schedule 19 (DRG 1, 2, 3, 4, 5, 6, 7, 8, 9, 10) Can be configured as per buyer's choice within offered technical details * Colour of finish As per buyer's choice * Desk top finishing All sides Edge to be banded with PVC tape of 2 mm thick with help of hot melt glue * Distance between Tabletop edge and Seat edge in mm (+/- 5 mm) NA * WARRANTY Warranty period in number of years 2 1, 5 * Bold specifications are the golden parameters. Consignees and Quantity 2/3 S.No. Consignee Address Quantity Delivery Days 1 Jyotish Kumar Bagoree 313001, Udaipur 100 15
Desktops Desktops ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel Intel, AMD Processor Generation 7th 6th, 7th, 8th Processor Intel Core i3-7100 (3.9 GHz, 3 MB Cache, 2 Cores) As per GeM Catalogue. Motherboard Chipset Intel B250 As per GeM Catalogue. Expansion Slots (PCIe x 1) (Number) 3 - Expansion Slots (PCIe x 4) (Number) 0 - Expansion Slots (PCIe x 16) (Number) 1 - Graphics Graphics Type Integrated - Graphic Memory N/A - Operating System Operating System (Pre-Loaded) Linux Windows 10 Professional, Linux, DOS, Windows 10 Home, Windows 10 Professional under Microsoft Shape the Future Program RAM Type of RAM DDR 4 - 1/3 RAM Size (GB) 4 4, 8, 16, 32 (or higher) RAM Expandability upto (GB) 32 16, 32, 64 (or higher) RAM Speed (MHz) 2400 - Storage Hard Disk (GB) 1000 500, 1000, 2000 (or higher) Cabinet Cabinet Tower - Cabinet Volume (Litres) - - Internal Bays 3 - External Bays (Number) 1 - DIMM Slots (Number) 2 - Connectivity Wireless NA - Network Connectivity 10/100/1000 on board Integrated Gigabit Port - Ports USB Port 2.0 (Number) 6 - USB Port 3.0 (Number) 4 - Serial Port false - Parallel Port false - VGA true - HDMI true - Display Port true - Monitor Monitor Size (INCHES) 19.5 18.5, 19.5, 21.5, 24, 27 (or higher) Monitor Resolution (PIXELS) 1366x768 1366x768, 1920x1080, 3200x1800, 3840 x 2160, 1440 x 900, 1600 x 900 Monitor Certification - - Power Power Supply (Watt) - - Minimum Power Efficiency(%) 85 - Certification ROHS Compliance Yes - BEE/Energy Star for the given Model true - Input Devices Mouse Optical - Keyboard Standard - Generic Optical Drive N/A - Internal Speaker true - 2/3 On Site OEM Warranty (Year) 3 3, 5 (or higher) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Suresh Agrawal 304001, AGRAWAL HOSPITAL KE PASS SAWAI MADHOPUR CHORAYA JAKIRA NURSERY TONK 1 15
barbed wire Average Turn Over of Last 3 Years 7 Lakh (s) Experience with Gov. Required 5 Year (s) Barbed Wire ( 1818 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conforming to Indian Standard IS:278 latest - Barbed Wire Type Type B Type B CONSTRUCTIONAL Size Designation as per ISS 5 5 (or higher) Type of Zinc Coating Hot Dip Galvanized Heavy Coating Conforming to IS:4826 Hot Dip Galvanized Heavy Coating Conforming to IS:4826, Hot Dip Galvanized Medium Coating Conforming to IS:4826, Hot Dip Galvanized Light Coating Conforming to IS:4826, Electro Galvanized Heavy Coating Conforming to IS:12753, Electro Galvanized Medium Coating Conforming to IS:12753, Electro Galvanized Light Coating Conforming to IS:12753 Chromating With - 1/3 Net Weight of Barbed Wire in One Reel, (Kg) 30 PACKAGING Reel Metal - Packing Hasian Cloth - Gross Weight (Approx.) of One Reel including Barbed Wire, (Kg) 35 - CERTIFICATION ISI marked Yes Yes CM/L No - - Availability of Test Reports from Central Govt./NABL/ILAC accrediated Lab covering all the declared parameters as per IS specification Yes - Test Report No and Date - - Name and Address of the Lab - - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ashok Kumar Dhruw 493445, Forest Colony BTI Road Mahasamund (C.G.) 1818 15
Class Room Desking and Seating Class Room Desking And Seating ( 20 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values GENERIC TYPE OF DESKING INTEGRATED DESK CUM SEATING WITH SHELF/STORAGE UNDER DESK ONLY TABLE/DESK, ONLY SEATING, INTEGRATED DESK CUM SEATING, INTEGRATED DESK CUM SEATING WITH SHELF/STORAGE UNDER DESK, ONLY TABLE/DESK WITH SHELF/STORAGE UNDER DESK Desking Configuration THREE SEATER SINGLE SEATER, TWO SEATER, THREE SEATER, FOUR SEATER Length of Desking, Seating and Backrest (if provided) in mm (±10 mm) 1350 * DESK/BENCH SPECIFICATIONS Material of Desk Top +/- 2 mm (For shelf storage +/- 4 mm) 25 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with * 1/4 minimum 0.6 mm thick on Top side of type S, P or F having index 3.2.3 conforming to IS 2046 and minimum 0.5 mm thick balancing laminate on the other side Material of Support Structure or Side Pannel Mild Steel square Section of size 25x25 mm and wall thickness minimum 1.6 mm * Height of Desk Top in mm (±5 mm) 750 * Width of Desk Top in mm (± 5 mm) 400 * SEATING SPECIFICATION Material of Seat and Backrest (if provided) (+/- 2 mm (For back rest +/- 4 mm) 25 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, P or F having index 3.2.3 conforming to IS 2046 and minimum 0.5 mm thick balancing laminate on the other side * Material of Support Structure Mild Steel square Section of size 25x25 mm and wall thickness minimum 1.6 mm * Material of Seat Cushion WITHOUT CUSHION 40 mm thick PU foam of density 40 gram per cubic cm, WITHOUT CUSHION, ONLY DESK NO SEATING Width of Seating in mm (±10 mm) 300 * Height of Seat in mm (±10 mm) 500 * Width of backrest if provided in mm (± 5 mm) 200 * Back Support for Seating of Same materail as Seating Provided without cushion Provided with Cushion, Provided without cushion, back support not provided MISC DESIGN AS PER DGS&D drawing No DQA/GE/RC -208/Schedule 19 (DRG 1, 2, 3, 4, 5, 6, 7, 8, 9, 10) NO * 2/4 Colour of finish As per buyer's choice * Desk top finishing Two long sides shall have post form half round profile and other two sides edge banded with 2 mm thick PVC tape with the help of hot melt glue * Distance between Tabletop edge and Seat edge in mm (+/- 5 mm) NA * WARRANTY Warranty period in number of years 1 1, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 V Kaliyamurthi 603103, Institute of Fisheries Post Graduate Studies, Vaniyanchavadi, Chennai 20 15
Steam Sterlizer Steam Sterlizer ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Construction Type of Steriliser HORIZONTAL RECTANG ULAR/SQUARE- Steam Steriliser Pressure type for Hospital and Pharmaceutical use, conforming to IS: 3829(part 1)/1999, fitted with Silicon door gasket( expansion type). Steriliser Chamber size (L x W x H): 1200 mm x 600 mm x 600 mm, Electric load of the unit shall be 18 KW. As per GeM Catalogue. Steam supply to Steriliser From Built-in Steam Generator electrically heated using immersion heaters wired for operation on 3 phase 4 wire 400/440 V 50 Hz AC supply [with immersion heaters having mineral filled sheathed heating elements conforming to IS: 4159/2002 duly BIS marked and complying Direct Steam Operation from an external source, From Built-in Steam Generator electrically heated using immersion heaters wired for operation on 3 phase 4 wire 400/440 V 50 Hz AC supply [with immersion heaters having mineral filled sheathed heating 1/5 with safety requirements as per IS : 302-2-201(1992)] elements conforming to IS: 4159/2002 duly BIS marked and complying with safety requirements as per IS : 302-2-201(1992)], Buil t-in electrically heated Steam Generator (made of SS 316 (AISI 316) with low water protection system), it should work with 3 phase 400/440 V 50 Hz AC supply Material: Steriliser parts; Chamber, Jacket, Door, Door Ring and shall be made of SS 304 SS 304, SS 316 or SS 316L Type of control Manual through indt. switch based Manual through indt. switch based, Automatic: MICROPROCESSOR CONTROLLED, WITH PRESELECTED STERILISATION PROGRAMS (variable programs customisable as per Buyer’s requirement to deal with sterilisation and drying of wrapped/unwrapped loads at 121 & 134 degree C ) CONSTRUCTION Instruction plate on Steam Steriliser advising user to use soft water for steam generation for long service life of Steam Steriliser YES - Whether a compatible water softener/reversed osmosis based system to feed water to the steam generator unit is to be supplied with the steriliser: No Yes, No Provision of Lock on Steriliser Chamber door: Manual Lock Manual Lock, Automatic Lock, Manual and Automatic Locks, both 2/5 Installation The site ready for installation equipped with water supply, electric connection cabling and drainage outlet shall be provided by Buyer. The Seller shall be responsible to carry out for installation of the offered Steam Steriliser unit on turnkey basis i.e. Any civil work required for installation of the ordered equipment i.e. flooring tilling/plastering/Paint and/or wood work shall be Seller’s responsibility. The Seller shall also provide training to personnel of buyer. - Type of Door: Radial Type Sliding type, Hinged type, Radial Type Display facility for Sterilisation Cycle parameters Chamber Temperature, Low water indicator Chamber Temperature, Cycle number, Batch Number, Time and date, Alarm indicator, Low water indicator Print facility for record generation of dates, time, load, identification number and operating parameters (temperature and holding time etc): Yes, port given to connect an external Printer Unit Yes, port given to connect an external Printer Unit, Yes, by an inbuilt printer unit Warranty Period 3 3, 5 No of Doors in Steriliser 1 1, 2 Whether Type Test Certificate from a Govt/NABL/ILAC approved testing laboratory is available (If Yes, to be furnished by Seller to Buyer on demand) for the offered product? false 3/5 Type of user friendly Interface (for microprocessor controlled Sterilizer) to specify parameters for running Sterilization cycle: NA Keyboard interface, Touch screen interface, NA Data Transfer facility through USB/RS232 port to computer/laptop on real time basis false Air removal from Sterilisation chamber, after loading the steriliser, by on for more pressure/vacuums pulsing for proper steam penetration YES - Integrated Shredder Facility Integrated Shredder (for shredding the load in Sterilisation chamber) Yes, with Manually controlled Shredder unit Yes, with Microprocessor controlled, with Manually controlled Shredder unit, Not available Material: Shredder parts; SS 304 SS 304, SS 316 or SS 316L Power of Motor used for Shredding Must be of >= 2 HP, >= 1000 RPM, 220 V, 50 HZ AC motor, and able to deal with shredding of bio medical waste land as per Steriliser capacity Must be of >= 2 HP, and able to deal with shredding of bio medical waste land as per Steriliser capacity, NA, no integrated Shredder unit offered Accessories (made of SS 316) for loading/unloading and handling of Load Number of Rails: 2 0, 2 Long Handle: 1 0, 1 Sterilisation Carriages 1 0, 1, 2 Pull out Trays/Tanks 2 0, 2 Floor loading carts 0 0, 2 Transfer carriages: 0 0, 2 * Bold specifications are the golden parameters. Consignees and Quantity 4/5 S.No. Consignee Address Quantity Delivery Days 1 K Kala Alias Saraswathy 605005, RAJIV GANDHI GOVERNMENT WOMEN AND CHILDREN HOSPITAL, 100 FEET ROAD, ELLAIPILLAICHAVADY, PUDUCHERRY 1 15
peak cap ( PAC Only ) Peak Cap ( 7500 ) ( Under PAC ) Make usi Model capwithlogo Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Governing Specification Conforming to specification as per BSF(MHA) letter no. 47 1/Prov- CTS(NC)/BSF/P-13-15 Peak cap/40-59 Dt 06-01-2017 * Material Material Barathea Cloth Barathea Cloth, Terry Wool Cloth Dimension Diameter 9.5 Inch X 9.75 Inch * Peak 2.5 Inch X 9.5 Inch * Complete Height (Peak to top) 5.5 Inch * OTHER REQUIREMENTS Side Button of White metal with state Emblem 2 Nos. * width of Leather Strip (Button to Button) 15 * 1/2 (mm) Inner side Leather bend * Band Patti 2.5 Inch * Test Report Name of the Lab aditi lab * Address of The Lab india * Test Report No. 2017 * Test Report Date 25-06-2016 * Test report to be furnished to the buyer on demand, if claimed to be available YES * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rohit Saxena 261001, Office of District Panchayat Raj Officer Room No. 114, 2nd Floor, Vikash Bhawan 7500 15
hopper or tipper Average Turn Over of Last 3 Years 180 Lakh (s) Experience with Gov. Required 8 Year (s) Hopper Or Tipper ( 8 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, * Main Engine Capacity (cc) 1396 * Make of Chassis - * Type of Chassis Frame - * Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl * 1/6 Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 17.88 Any applicable numeric value Speed, Max (Km/Hr) 80 * Max Engine Power BHP (BHP@rpm) 71 Any applicable numeric value Max Engine Torque (N-M@rpm) 140 Any applicable numeric value Main Engine Aspiration Turbocharged Natural Aspiration, Turbocharged, Supercharged, Turbocharged+ Supercharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 4 Any applicable numeric value Fuel Tank Capacity (Ltrs) 38 Any applicable numeric value Gradeability of Vehicle with load( %) 24.93 * Gradeability of Vehicle without load ( %) 25.2 * Ground Clearance (mm) 160 Any applicable numeric value Wheel Base (mm) 2380 * Kerb Weight (Kg) 1100 Any applicable numeric value Gross Vehicle Weight (Kg) 2255 Any applicable numeric value No of Axle (Nos) 2 * Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - * Type of Front Axle and Suspension System - * Type of Rear Axle and Suspension System - * Type of BIS MARKED Vehicle Tyre Radial * 2/6 Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 5 * Type of Steering Power Operated Manual, Power Operated Turning Radius, Min (mm) 5100 Any applicable numeric value Speed Governers No * ABS Fitted No * Front Vehicle Brake - * Rear Vehicle Brake - * Type of Clutch - * Tipping Angle (Degree) 48 45-9999999 Tipper Container cap acity/Volume(cubic metres) 3.2 0.5-10.5 Certification Chassis Certification ARAI/VRDE/ICAT No. - * Performance Parameters Standard Sparewheel and Tool Kit Yes * Warranty Time (Month) 15 * No. Of Free Service (Nos) 3 * Battery Warranty (Months) 12 * Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 4340 * Width of Chassis (mm) 1594 * Height of Chassis (mm) 1858 * Size Of Front Tyres (mm) - * Size Of Rear Tyres (mm) - * Size of Wheel (mm) 14 Any applicable numeric value Tipper body Pivot length (mm) 1546 * Tipper body Length (mm) 2695 * 3/6 Tipper Body Height (mm) 1082 * Overall Height of Tipper from Ground (mm) 1801 * Body Plate Thickness (mm) 2 1.5-9999999 Main Frame Thickness (mm) 4 Any applicable numeric value Pneumatic System true * Hydarulic System false * Tipping Hydraulic Cylinders(Make) - * Hydraulic System Driven by Main Engine * Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false * If Yes Auxiliary Diesel Power (HP@rpm) 0 Any applicable numeric value Auxiliary Diesel Engine Transmission - * Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 Any applicable numeric value No. of Cylinders in Auxiliary Diesel Engine 0 * Tipper Container Material Mild Steel Mild Steel, Stainless Steel, Aluminium, Chromium Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Any applicable numeric value Dumping Height (mm) 551 Any applicable numeric value Engine Oil Pressure Level Indicator in Control Panel true * Fuel Gauge Indicator in Control Panel true * Engine Cooling Liquid Temperature Indicator in Control Panel true * Operating Hour Meter false * Locking/Unlocking of Yes * 4/6 Tipper Discharge Container Lowering/Lifting of Tipper Discharge Container Yes * Counter Weight false * If yes Counter Weight (kg) 0 * Paint Automotive Paint * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Yuvraj Shripat Chavan 425401, Amalner Muncipal Council 8 15
Lamp Ballast for HPSV Lamps Lamp Ballast For HPSV Lamps ( 100 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Ballast for HPSV lamps (Excluding Tubular Flourescent Lamps) conforming to IS: 15882:2009 and all the ballasts specified in the standard shall meet the requirements of IS: 15885(Part-1):2011 latest and IS: 15885(Pa rt-2/Section-9): 2011 latest Yes - ISI Marked Yes Yes, No ISI marked if yes declare CM/L Number If 'No' write NA - - Ballast Wattage (in Watts) 250 W 250 W Operating Voltage 220 Volt -240 Volt - Supply frequency (in Hz) 50 Hz +/-5% - CONSTRUCTIONAL Ballast constructional requirements as per IS:15885 (Part 1) shall apply Yes - 1/4 Winding material Copper wound - Supply current: At rated voltage, the supply current shall not differ by more than 10 percent from the value marked on the ballast when the latter is operated with a reference lamp Yes - Current wave form shall be as per Cl 9 of IS:15882:2009 latst Yes - Magnetic screening: The ballast shall be effectively screened against the influence of adjacent ferro- magnetic materials as pe Cl 10 of IS:15882:2009 latest Yes - Ballast setting: Power delivered at rated voltage as per Cl. 15.1 of IS:15882:2009 latest (Not Less than 95% and not more than 105% of the reference ballast when operated at the objective lamp voltage as given in IS:9974(Part2) Yes - Short Circuit current between 92% and 106% of rated voltage as per Cl. 15.2 of IS:15882:2009 latest Yes - Open circuit voltage between 92% and 106% of its rated voltage as per Cl. 15.3 of IS:15882:2009 latest Yes - Insulation resistance as per Cl. 11 of IS:15885 Part 1 : 2011 latest >/=2 M Ohm - Electric strength as per Cl. 12 of IS:15885 Part 1 : 2011 latest Yes - Rated Maximum operating temperature of ballast (Tw) (Ref. Cl. B.9.2 of IS:15885 part 105 deg C - 2/4 1:2011 latest) Ballast shall pass the thermal endurance test for winding of ballast as per Cl.13 of IS:15885 Part 1 :2011 latest Yes - Ballast shall pass High voltage test 5 KV for 5 Seconds Yes - Watt Loss 26 Watts maximum for 250 W Ballast - Cold resistance at 20 deg. C (Tolerance: t+5%, 10%) - must declare 95 - Circuit power factor >/=0.85 - WARRANTY Guaranteed period of replacement 1 Year - CERTIFICATION Marking: Apart from IS requirement each ballast shall be marked with serial number of ballast, Watt Loss, Tw details Yes - Availability of Type Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to IS specifications as appliacable Yes - Test Report Number - - Test Report Date - - Name of Test Lab - - Address of Test Lab - - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ashok Patil 450331, Nagar Nigam Bhawan, Pragati Nagar Burhanpur 100 15
Lamp Ballast for HPSV Lamps Lamp Ballast For HPSV Lamps ( 50 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Ballast for HPSV lamps (Excluding Tubular Flourescent Lamps) conforming to IS: 15882:2009 and all the ballasts specified in the standard shall meet the requirements of IS: 15885(Part-1):2011 latest and IS: 15885(Pa rt-2/Section-9): 2011 latest Yes - ISI Marked No Yes, No ISI marked if yes declare CM/L Number If 'No' write NA - - Ballast Wattage (in Watts) 400 W 400 W Operating Voltage 220 Volt -240 Volt - Supply frequency (in Hz) 50 Hz +/-5% - CONSTRUCTIONAL Ballast constructional requirements as per IS:15885 (Part 1) shall apply Yes - 1/4 Winding material Copper wound - Supply current: At rated voltage, the supply current shall not differ by more than 10 percent from the value marked on the ballast when the latter is operated with a reference lamp Yes - Current wave form shall be as per Cl 9 of IS:15882:2009 latst Yes - Magnetic screening: The ballast shall be effectively screened against the influence of adjacent ferro- magnetic materials as pe Cl 10 of IS:15882:2009 latest Yes - Ballast setting: Power delivered at rated voltage as per Cl. 15.1 of IS:15882:2009 latest (Not Less than 95% and not more than 105% of the reference ballast when operated at the objective lamp voltage as given in IS:9974(Part2) Yes - Short Circuit current between 92% and 106% of rated voltage as per Cl. 15.2 of IS:15882:2009 latest Yes - Open circuit voltage between 92% and 106% of its rated voltage as per Cl. 15.3 of IS:15882:2009 latest Yes - Insulation resistance as per Cl. 11 of IS:15885 Part 1 : 2011 latest >/=2 M Ohm - Electric strength as per Cl. 12 of IS:15885 Part 1 : 2011 latest Yes - Rated Maximum operating temperature of ballast (Tw) (Ref. Cl. B.9.2 of IS:15885 part 105 deg C - 2/4 1:2011 latest) Ballast shall pass the thermal endurance test for winding of ballast as per Cl.13 of IS:15885 Part 1 :2011 latest Yes - Ballast shall pass High voltage test 5 KV for 5 Seconds Yes - Watt Loss 38 Watts maximum for 400 W Ballast - Cold resistance at 20 deg. C (Tolerance: t+5%, 10%) - must declare 20 - Circuit power factor >/=0.85 - WARRANTY Guaranteed period of replacement 1 Year - CERTIFICATION Marking: Apart from IS requirement each ballast shall be marked with serial number of ballast, Watt Loss, Tw details Yes - Availability of Type Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to IS specifications as appliacable Yes - Test Report Number - - Test Report Date - - Name of Test Lab - - Address of Test Lab - - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ashok Patil 450331, Nagar Nigam Bhawan, Pragati Nagar Burhanpur 50 15
media control systems or wireless presentation system Media Control Systems Or Wireless Presentation System ( 2 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Supported Operating Systems (PC) NA * Supported Operating System (Mobile) NA * Type of Video Outputs NA * Type of Audio Outputs ANALOG * Output Resolution (Pixel x Pixel) NA Any applicable text(s) Frame Rate (fps) 0 Any applicable numeric value Maximum Number of Simultaneous sources on Screen 0 * Maximum Number of Simultaneous Connections with the system 0 * Wireless Standards 802.11 a/b/g/n * Wireless Frequency Both 2.4 & 5 * 1/3 (GHz) Data Transfer Rate (Mbps) 0 Any applicable numeric value Wireless Range (Maximum) (meters) 359 10-999 Wireless Security features NA * Number of VGA Port 0 * Number of HDMI Port 0 * Number of USB Port 0 * RJ-45 Port Yes * Reset button Available * Audio Jack Socket Yes * Medium of data transmission (From Computer/Laptop to system) NA * Essential accessories to be supplied detachable gooseneck condenser microphone and a reading light for the podium top. * Operating Temperature Range (Degree C) 37 * Operating Humidity (% RH) 20 * Power Requirements 230V, 50HZ * Power Consumption in Operating mode (Watt) 100 * Power Consumption in Standby mode (Watt) 40 * Certifications Available NA * Dimensions (H x W x D) (mm x mm x mm) W 420 X H 1135 X D 580 mm * Weight (Gms) 18500 * On Site OEM Warranty (Years) 1 1, 2, 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Jagdish Prasad 304804, GOVERNMENT P.G COLLEGE NH-12, CISF ROAD, DEOLI 2 15 2/3
Human Resource Outsourcing Service
revolving chair Revolving Chair ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt As per GeM Catalogue. Tilt Tension Adjustment true - Height Adjustment ± 5(mm) up to 120 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest with lumber support of polypropylene at multilevel across back backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black - Ergonomic Seat Design true Back type fixed push back, height adjustable Backrest is made of two pcs injection Backrest is made of two pcs injection - 1/5 moulded frame moulded frame backrest has separate adjustable headrest false Seat type fixed fixed, sliding Seat is curved true - Locking mechanism true - Type of locking 3-Position Locking - Number of arm movement 4(up & down end left & right) 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support N.A integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon 2/5 Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material steel covered with polyurethane steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Pr oypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU foam covered with mesh fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 50 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 40 - Material of Fabric Back Cover mesh fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leathe rite, N.A Material of Fabric of Seat Cover foam laminated mesh fabrics foam laminated mesh fabrics, Mesh Fabrics, leatherite, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 250 gram - 3/5 DIMENSION Overall Chair Height ±15mm 810 As per GeM Catalogue. Backrest Height ±15mm 520 As per GeM Catalogue. Backrest Width ±10mm 440 410, 440, 480, 500, 520, 5 50, 650, 680, 700, 720 Seat Height ±15 mm 480 420, 450, 520 Seat Width ±10 mm 480 440, 550, 4 60 Seat Depth ±10 mm 460 400, 460, 420, 540 Thickness of M S Plate Joining the under structure with Seat 0.5 As per GeM Catalogue. Thickness of Plywood used in Seat ±1(mm) 15 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 15 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 620 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 35 mm As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 35 mm As per GeM Catalogue. WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4- year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand NO YES, NO BIFMA Certification NO YES, NO OEM of offered product is ISO 9001:2015 certified NO YES, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified NO YES, NO 4/5 Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ram Swaroop Khatik 335701, Executive Engineer, RSAMB, Shop No. 95, First Floor, New Dhan Mandi, Anoopgarh 1 15
Executive Table Executive Table ( 15 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Mode of supply Knocked Down To Be Assembled At Consignee Site By The Seller Assembled Ready To Use, Knocked Down To Be Assembled At Consignee Site By The Seller, Knocked Down To Be Assembled At Consignee Site By Consignee Himself Frame type Free standing - Understructure of table Gable end and modesty panel - Storage provided One side One side, Both side, No Storage Keyboard tray Not provided Provided, Not provided Foot rest Not Provided Provided, Not Provided MATERIAL Table top Material Three layer prelaminated particle board(Wood Product) of grade II type II of IS 12823/Latest MDF board of grade SBG II of IS 12406/Latest, Three layer prelaminated particle board(Wood Product) of grade II type II of IS 12823/Late st, Commercial Block Board BWP grade Conforming to IS 1659, Decorative Block 1/5 Board BWP grade Conforming to IS 1659, Commercial Block Board MR Grade Conforming to IS 1659, Decorative Block Board MR Grade Conforming to IS 1659, Teak wood, Carved teak wood, Other wood Gable end and modesty panel material Three Layer prelaminated particles board(wood product) of grade II type III of IS 12823/Latest Flat single layer prelaminated MDF board conforming to having designation PLMDF-23 of IS 14587/Latest, Three Layer prelaminated particles board(wood product) of grade II type III of IS 12823/Late st, Decorative Block Board BWP grade Conforming to IS 1659, Other wood, NO Gable end and modesty panel Leg Material NO LEGS Teak wood, NO LEGS MISC Table top long sides To be post form half round profile with corner edge bending - Table top plain sides Edge to be banded with PVC tape of 2mm thick with the help of hot melt glue - Gable end and modesty panel plain side Edge to be banded with PVC tape of 2mm thick with the help of hot melt glue - Number of buffers provided N.A - 2/5 DIMENSION Thickness of table top ±2mm 19 5, 9, 12, 15, 19, 25, 38 Thickness of gable end and modesty panel ±2mm 19 - Length of table top ±10mm 1372 1372.0 Depth of table ±10mm 750 750.0 Height of table ±10mm 750 - Dimension of leg(mmXmm) ±5mm No legs 40mmX40mm, 50mmX5 0mm, 60mmX60mm, No legs STORAGE UNIT Number of Storage unit provided Single storage Single storage, Double storage, Triple storage, Four storage, No storage Width of storage unit ±10mm N.A - Depth of storage unit in mm (±10mm) NA - Height of smallest storage unit ±5mm N.A - Height of medium storage unit ±5mm N.A - Height of largest storage unit ±5mm N.A - KEYBOARD TRAY Type of keyboard tray N.A - Material of keyboard tray and Right angle L- type supporting bracket N.A - Keyboard adjustablity N.A - fixing of supporting bracket N.A - Length of telescopic channe±l0mm N.A - Average weight of telescopic channel ±50Gms N.A - Keyboard front width±10mm N.A - Keyboard depth±10mm N.A - Keyboard height±10mm N.A - 3/5 Finish of exposed edges of keyboard tray N.A - Material thickness of keyboard tray ±1mm N.A - FOOTREST Material of footrest N.A - Length of footrest ±10mm N.A - Depth of footrest ±10mm N.A - Height of footrest ±10mm N.A - Finish of exposed edges N.A - Material thickness of footrest ±2mm N.A 5mm, 9mm, 12mm, 15m m, 19mm, 25mm, 38mm, N.A COLOUR & FINISH Table top finish Laminate in colour with matt finish 0.6-0.8mm thickness of type S, F or P having index no.3.2.3 conforming to IS 2046/Latest with having balancing laminate of 0.5mm thick on other side - Table top shade As per Buyer's choice - WARRANTY Warrantee period in number of years 1 1, 2, 3, 4, 5 CERTIFICATION Test reports to be furnished to buyer on demand YES - Product having BIFMA certification YES - OEM of offered product is ISO 9001:2015 certified YES - OEM of offered product is ISO 14001:2015 certified YES - OEM of offered product is ISO 18001:2007 certified YES - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 4/5 1 Ram Swaroop Khatik 335701, Executive Engineer, RSAMB, Shop No. 95, First Floor, New Dhan Mandi, Anoopgarh 15 15
computer servers Average Turn Over of Last 3 Years 89 Lakh (s) Experience with Gov. Required 2 Year (s) Computer Servers ( 10 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Specification Form Factor Rack Rack Size (RU) 1 * Processor Make Intel Intel, AMD, SPARC Max. Number of sockets available on chipset 2 1-16 Max. Number of sockets populated with processor 1 1-16 Number of core per Processor 8 * Processor Configuration Intel Xeon Bronze 3106 (1.70GHz/8-core/11MB 85W) * Chipset compatible with CPU yes * Availability of Co- Processor No * 1/4 If Yes Co-Processor Configuration NA * PCI Slots (Express Gen 3.0) 2 * Type of RAM DDR4 * RAM Size (GB) 16 16-16000 RAM upgradable upto (GB) 1000 32-24000 DIMM Slots (No.) 16 * Type of Hard Disk Drive SSD SAS, NL SAS, SSD, SATA Hard disk drive Capacity (GB) 980 300-12000 Hard disk drive Speed (RPM) NA * RAID Controller Cache (MB) 0 * RAID Type 1 * RAID Controller Ports @12 Gbps 2 * Video Controller (support VGA or above resolution) Yes * Keyboard No * Mouse No * Bays (min. 2 internal or more hot plug) 4 * USB Ports (version 2.0/3.0) 3 * Certifications Compliance support by Windows, Red Hat or Novell or Oracle Cluster S/W Yes * DVD ROM (or better) 8x or better * Network Card Supported 1G, 10G * FC HBA Dual port card NA * FC HBA Dual port card Speed NA * Power Management - * Redundant Power Supply Yes * Redundant Fan Yes * 2/4 Total No of Ports 2X1G * Declare SPEC int_rate_base 2006 ; specfp_rate_2006 for 1, 2, 4, 8 prcessor as applicable Yes * Server scalability to be achieved within the box without adding nodes Yes * RoHS Compliance Yes * BIS Registration number & its Validity - * Max. power consumption of the system (Watt) 550 * Availability of Type test reports consisting of verification of all the features & functional parameters & environmental tests sequences as under: a Dry heat test (For 16 hrs at a temperature of 45 degree C in accordance with IS: 90 00/part-3/section-5/197 7) b Cold test(For 4 hrs at a temperature of 0 degree C in accordance with IS: 9000/part-2/sec tion-4/1977 c Damp Heat Cyclic Test ( For 2 cycles of 24 hrs at a temperature of 40 degree C & 95% RH in accordance with IS: 90 00/part-5/section-1/198 1) Note:- The server shall be checked for all the parameters before conditioning, After completion of the above environmental tests sequence, with a recovery period of 1 to 2 hrs, the server shall be functional No * Name address of Lab - * Test Report No. date - * Power Supply 230 V +/-10%, 50 Hz * On Site OEM 3 1, 3, 5 3/4 Warranty (years) (or higher) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bhoga Vinay Kumar 500033, Centre for Good Governance, Road No.25, Jubilee Hills. 10 15
Multifunction Machines
OEM Cartridge/Consumable Experience with Gov. Required 3 Year (s) OEM Cartridge/Consumable ( 6 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand Canon * Type of Cartridge/Consumable Toner * Colour of Cartridges/Consumable s Black * Ink/Toner/Drum Model number Canon NPG-51 Toner * Corresponding Part number/code 2785B001AA * Printer Model number/numbers for which Cartridge is suitable Canon iR 2520, Canon iR 2520W, Canon iR 2525, Canon iR 2525W, Canon iR 2530W * Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) 14600 * 1/2 for colour (Numbers) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Khulesh Kumar Sahu 490023, Bhilai Municipal Corporation Near GE Road Supela Bhilai 490023 6 15
absorbent cotton wool Average Turn Over of Last 3 Years 08 Lakh (s) Experience with Gov. Required 2 Year (s) Absorbent Cotton Wool ( 3000 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Sterility false STANDARDS Conformity to Indian Pharmacopieia Standard IP:2010 Vol -II or Latest Yes - DIMENSIONS & WEIGHT Thickness 10 8, 10, 12 Width 38 25, 38 Net Weight 500 20, 50, 100, 200, 250, 500 FUNCTIONAL FEATURES Sinking Time (Max) 10 - Water holding capacity (Min) (gm/gm) 23 - PACKING Packing Material POLYPACK - REPORTS Submission of Test Report on Form 39 or from Central Govt. NABL/ILAC acredoited Lab at the time of supply YES - Certification available CE, ISO, GMP, NON CONVICTION, MMC - Product conformity Yes - 1/2 certificate is to be provided to the buyer on demand Availability of valid Manufacturing Drug License Yes - Drug License No S-MNB/11/122 - Drug License Date 21.03.2012 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 DR. SANJAY KUMAR 110007, Hindu Rao Hospital Malka Ganj 3000 15
Dry Erase Writing Boards Average Turn Over of Last 3 Years 1 Lakh (s) Experience with Gov. Required 1 Year (s) Dry Erase Writing Boards ( 10 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Performance Parameters Purpose of writing board Writing Writing Material of Board Ceramic Steel Ceramic Steel Material of Frame Anodized extruded Aluminium alloy hollow section of designation 63400 conforming to IS: 1285 Anodized extruded Aluminium alloy hollow section of designation 63400 conforming to IS: 1285 Material of Back Cover Galvanized steel sheets conforming to IS:277 Galvanized steel sheets conforming to IS:277 Thickness of Back Cover 1 * Thickness and Material of back support (conforming to IS:12406) 12 12.0 Top surface coating thickness of sheet in mm 1 Any applicable numeric value 1/4 % Gloss at 60 deg.head (min.) 2% green, blue, black colours 80% for white colour only, 2% green, black colours, 60% for white colour only Surface suitable for writing with chalk for colour & black board Dry marker ink for white board only, chalk for colour & black board Back surface coating thickness of sheet (min) 5 Any applicable numeric value Thickness and material of top steel sheet Having Viterious Enamelled coating on both side 4.3 Any applicable numeric value Excellent Erasability without leaving impression Yes Yes Warranty in years 1 1, 2, 3, 4, 5 Dimensional parameters Dimensions of the Board in feet (width x height ) 4x 6 4x 6 Dimensions of Boards in mm x mm (width x height ) 1200 X 1800 450 X 600, 600 X 900, 900 X 1200, 1200 X 1800, 1200 X 2400, 1200 X 3000, 1200 X 3600 Wall thickness of Anodized Aluminium Frame (Min) in mm 1.2 1.2 Colour of Board Green Green Frame Width in mm 20 20 Additional Items One Magnetic Type Eraser No * 4 nos dry erasable ink markers(Green/blue/re d/Black) No * one set of 6 Pcs paper holding magnets for white board only false * one box of 50 nos non dust chalks sticks false * one dry wipe duster 3 nos spare sponges for colour and black board false * Reports Availability of Type Test Reports of the No YES, No 2/4 product from Central Govt/NABL/ILAC accredited Lab showing compliance to the specification Test Report No - * Test Report Date - * Name of the Lab - * Complete Address of the Lab - * copy of test reports to be furnished to the buyer on demand at the time of supplies (Applicable if availability of test report indicated as YES, otherwise put NA) NA * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Krishan Kumar 301702, Govt. College Bibirani (Alwar) Near Bibirani Temple Tehsil- Kotkasim Bibirani (alwar) 10 15
floor cleaners Floor Cleaners ( 4 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Material Base Material Calcium Hypochlorite Any applicable text(s) Colour and Odour Colour of Solution Transparent * Odour Odourless * pH and Keeping Quality pH 7.5 Any applicable numeric value Keeping Quality (Year) 3 Any applicable numeric value Physical Characteristics Applicability of Solution Dilute Neat, Dilute Toxic Compounds Absent Present, Absent Antibacterial Agent With With, Without Stain Removing Agent With With, Without Corrosive Agent Absent Present, Absent Anti-greasing Agent Present Present, Absent Container Material Plastic Plastic, Glass Packing Quantity Per Pack (ml) 200000 Any applicable numeric value * Bold specifications are the golden parameters. 1/2 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Hemant Chintaman Adkar 411005, Pune Municipal Corporation, Near Mangala theater shivajinagr pune 4 15
lead acid battery Lead Acid Battery ( 32 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values GENERIC Types of Lead Acid of Battery Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments, Statinary Lead-Acid Batteries (with tubular positive plates) in Monobloc Container conforming to IS:13369/1992, Stationary cells and Batteries, Lead Acid Type (With Tubular Positive Plates) conforming to IS:1651/1991, Stationary Valve Regulated Lead Acid Batteries conforming to IS:15549/2005, Lead- Acid Storage Batteries for Motor Vehicles with 1/4 Light weight and High Cranking Performance conforming to IS:14257/1995, Lead- Acid Storage Batteries for Motor Vehicles conforming to IS:7372/1995 Nominal Voltage of Battery (volts) 12.0 Volt 2.0 Volt, 6.0 Volt, 12.0 Volt Material of container Fibre Reinforced Plastics (FRP) Hard Rubber, Fibre Reinforced Plastics (FRP), Polypropylene, ABS Rated Capacity at C20 discharge (AH) 75 1-300 Warranty (Years) 2 Years 1 Year, 2 Years, 3 Years, 4 Years, 5 Years Battery Condition Charged * CONSTRUCTIONAL Dimensions (L x W x H) (mm x mm x mm) As per relevant IS Specifications * Volume of Electrolyte (ml) 5000 * Weight of Dry Battery (Kg) shall be as per relevant IS: Specn., corresponding Ah Yes. * No.of cells per Battery (No.) 6 Cells for 12 Volt battery * CERTIFICATIONS Availability of Test Reports from Central Govt./NABL/ILAC accrediated Lab showing conformity to the specifications Yes * Address of the Lab BANGLORE * Name of the Lab CPRI * Test Report No. 5797 * Test Report Date 12/12/2010 * Compulsory Registration (CRS) of BIS for safety as per IS 16046 as applicable. Secondary Cells and (Batteries containing Alkaline or other non- acid Electrolytes-Safety Requirements for YES * 2/4 Portable sealed secondary cells, and for Batteries made from them for use in portable applications * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 AMIT SHARMA 462001, Old Secretriate, Collector Office Bhopal 32 15
Human Resource Outsourcing Service