Loading
Loading…
Loading…
2,847 results • Latest
heated display cases-hot case Experience with Gov. Required 2 Year (s) Heated Display Cases-hot Case ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Heating Chamber Size (IN LitrEs) 100 - Number of compartments (in nos) 5 - Maximum Hot Case temperature (Degree in C) 100 - Inside Finish SS SS, Painted MS, Ceremic Coating Material of partition/Shelves SS MS, Al, SS Temprature Control System Thermostatic Electronic, Thermostatic Type of Door/Shutter Shutter Sliding door, Shutter Display of Hot Case Temp No Yes, No Material of Door Other Glass, Other CONSTRUCTIONAL Over all Size (mm) 1800X600+225X850 - Operating Voltage (Volt) 230AC - Weight (in Kg) 55 - 1/2 Maximum Wattage (KW) 3 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ganesh Kumar 325205, Govt. Girls College Baran Baran Rajasthan 2 15
pH Meter Experience with Gov. Required 2 Year (s) PH Meter ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values CONFIGURATION Type Microprocessor Based Microprocessor Based, Microcontroller Based Display LED/LCD/Touch Screen, 3 digits - Calibration up to 3 points with auto buffer - pH Range (pH) 0.00 to 14.00 - Accuracy (pH) +- 0.05 +- 0.05 Corrosion Resistant Yes - Power Requirements 230 V +- 10, 50 Hz AC - Modes pH mV- C - Parallel temperature indication Yes - Temperature Compensation Type Automatic Automatic, Manual Temperature Accuracy (Degree C) +- 0.3 +- 0.3 Temperature Compensation Range (Degree C) 0 to 100 - Resolution (pH) 0.01 - 1/3 Operating Humidity: RH in (%) 100 - Operating Temperature (Degree C) -20 - Warranty Warranty (Year) 3 3 Storage pocket for pH electrode Yes - Ingress Protection, Water Tight NA - Impact Resistant Yes - System to be supplied with Measuring electrode combined & glass calomel, temperature probe, Electrode Stand, calibration buffer and maintenance kit, operation manual, power cable and plug Yes - CERTIFICATIONS Availability Of UL/CE Certification As Per EN 61010-1:2010 Safety Requirements For Electrical Equipment For Measurement, Control, And Laboratory Use General Requirements NA - Test Reports For EMC/EMI As Per EN 61326-1:2013 Electrical Equipment For Measurement, Control And Laboratory Use EMC Requirements General Requirements (Test Reports Are To Be Furnished When Demanded By Buyer) NA - Availability Of Test Reports From Central Govt/NABL Approved ILAC Acredited Lab To Prove Conformity To The Specification (Test Reports Are To Be Furnished When Demanded By Buyer) false - Test Report Number and Date NA - 2/3 Name and address of the Lab NA - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ganesh Kumar 325205, Govt. Girls College Baran Baran Rajasthan 2 15
Multimedia Projectors
medical stools or chairs Medical Stools Or Chairs ( 112 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Material and shape of Stool Material of Back rest NA Any applicable text(s) Material of cushion NA Any applicable text(s) Cushioning in the stool Top Without cushion with Cushion, Without cushion Finish STEEL SEEL Any applicable text(s) Design of Back rest NA Any applicable text(s) Back rest support Frame Material NA Any applicable text(s) No of Legs in the under structure 4 Any applicable numeric value Foot rest With With, Without Shape of stool top Round * Material of Top Mild Steel Stainless Steel, wood, Mild Steel Covering material of cushion NA * Leg shoe Material NA Any applicable text(s) Painting Powder coating Stove enamel, Powder coating, Polishing, 1/3 Others Density of Cushion (Kg/cub metre) NA Any applicable text(s) Type of Stool Fixed Fixed, Revolving Material of Under Structure NA Any applicable text(s) Back rest Without With, Without Dimensions Adjustable Height false true, false Normal Height (mm) 600 50-1000 Back rest height (mm) NA Any applicable text(s) Min. Height (mm) 600 50-1000 Diameter/Side length of Top (mm) 300 Any applicable text(s) Thickness/Size of Under structure Frame (mm) 19 Any applicable text(s) Thickness of cushion (mm) NA Any applicable text(s) Max. height (mm) 600 50-1000 Back rest Thickness (mm) NA Any applicable text(s) Stool Top base Thickness (mm) 0.8 1.0E-6-100 Over all width/Diameter (mm) 410*410 Any applicable text(s) Drawing and product code Drawing No. available on web false * Drawing No. NA * Product Code No. NA * Product Code available on web false * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Geeta Sharma 304001, Govt. College, Tonk Bahir Road, Tonk 112 15
hydraulic pumps-Floating Pump Hydraulic Pumps-Floating Pump ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values CONSTRUCTIONAL Pump Type Centrifugal action, Continuous run and directly coupled to engine Centrifugal action, Continuous run and directly coupled to engine Casing Material Powder coated Aluminium alloy as per IS : 617-1975 - Engine Type Air Cooled Four stroke Petrol Engine - Horse Power of Engine(HP)(on the basis of min discharge, max delivery Head, efficiency of pump and coupling (HP) 7.9 Ignition Transistorized - Starting Mechanism Recoil - Dry Weight of Floating Pump (Kg) <=30 Kg - Automatic float controlled throttle Yes - Float Assembly Material Fibre glass with Polyurethane foam - 1/3 Pump shall not sink even float is damaged Yes - Fuel Tank Capacity for continuous run of minimum one hour 5 - Fuel gauge Yes - Standard Accessories Water resistant air cleaner and muffler with pump - Marked with photo luminescent tape for visibility in darkness Yes - PERFORMANCE Delivery Head (Metres) >= 15 meters - Water Discharge (litres/min) >=950 litres/min - Discharge Solids upto size (mm) 15 - Suitable water depth to operate(mm) 25 - CERTIFICATION Engine shall meet applicable environmental protection norms and emission standards as per noise and emission norms issued or noticied by Govt of India Yes - Availability of Type Test Report to prove conformity of parameters to the specification from any ILAC/NABL accredited/Central Gov LAB Yes - Test certificate No and Date - - Name and Address of the Lab - - Product Warranty (Years) 2 - Service Warranty for Parts from date installation (Years) 5 - Type Test Report to be furnished to the buyer on demand Yes - * Bold specifications are the golden parameters. 2/3 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajesh Bishya 457887, collectorate office alirajpur 1 15
almirah- Steel Average Turn Over of Last 3 Years 3 Lakh (s) Experience with Gov. Required 2 Year (s) Almirah- Steel ( 20 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS:3312 latest false - No of shelves (Nos) N.A - Type of Shelves N.A - Locker Provided false - Locking System with the locker NA - Cloth hanging provision in the Almirah false - Number of Doors (Nos) 2 - Door Stiffner upto full door height Provided with the almirah doors true - Number of Hinges with each door (Nos) 2 - Number of Glass Sheet fixed in each Almirah door (Nos) N.A - Construction Welded - Lock Three Way bolting - 1/4 device controlled by 6 lever lock MATERIAL Material M.S sheet conforming to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1 M.S sheet conforming to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1, M S Sheet conforming to Quality Grade D of IS:513/2008 with amend. no. 1 (Not as per IS 3312) Material of Almirah Doors M S Sheet M S Sheet, 5 mm thick Transparent Glass Sheet fixed in the MS sheet frame, 3mm thick polycarbonate sheet fixed in the ms sheet frame, perforated MS sheet Sheet Thickness of Locker N.A - Length of Glass Sheet ±10 (mm) N.A - Width of Glass Sheet ±10 (mm) N.A - Sheet Thickness of door in mm 0.8 mm (Minimum) - Sheet Thickness of sides, back, Top and Bottom 0.8 mm (Minimum) - Sheet Thickness of Shelves N.A - Sheet Thickness of Pedestal in mm 0.7 mm - Material of Lock Brass and steel finish - Material of Keys brass and steel finish - DIMENSION Height (Without Pedestal) (in mm) (+/- 10 mm) 1855 1000, 1155, 1855, 1800, 2000, 850, 1050, 1325, 1450 Width in mm (± 7 mm) 910 760, 910, 1023, 700 Depth in mm (±5 mm) 480 430, 455, 480, 486, 270, 370, 400 Inside Height of Locker in mm (± 5 mm) N.A - Inside Width of Locker i mm (±5 mm) N.A - 2/4 Inside Depth of Locker in mm (±5 mm) N.A - Width of Stiffner in mm (±5 mm) N.A - Thickness of MS Sheet of Stiffner (in mm) N.A - Stiffened Pedestal height in mm (±2 mm) 120 - Pedestal Width in mm (±2 mm) 70 - COLOUR & FINISH Finish Synthetic enamel - Colour of Paint steel gray - Packing: Gutta Packing - CERTIFICATION ISI marked false - WARRANTY WARANTEE PERIOD IN NUMBER OF YEARS 1 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajendra Prasad Mali 305404, GOVERNMENT COLLEGE, KEKRI, AJMER ROAD, KEKRI (AJMER) 20 15
All in one All In One ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel - Processor Generation 7th 6th, 7th, 8th Processor Intel Core i3-6320 (3.9 GHz, 4 MB Cache, 2 Cores) As per GeM Catalogue. Chipset Chipset Intel H110 - Graphics Graphics type Integrated - Graphic Card Description Integrated Intel HD Graphics - Storage Type of Hard disk drive SATA SATA, SSD, Fusion Hard Disk Drive Size (GB) 1000 500, 1000, 2000 (or higher) Hard disk drive speed (RPM) 7200 - RAM Type of RAM DDR4 - RAM Size (GB) 4 4, 8, 16, 32 RAM Expandability Upto (GB) 16 8, 32, Not- Available Ram speed (MHz) 2133 - Operating System Operating system Windows 10 Home Windows 10 Home, 1/3 Windows 10 Professional, Linux, Mac OS Sierra, Mac OS High Sierra OS Certification Windows - Display Display Size (Inch) 22 Type of Display Non Touch Touch, Non Touch display resolution (Pixels) 1920 x 1080 1920 x 1080, 3200 x 1800, 1920 x 1080 with IPS Technology, Retina 4K Display (4096 x 2304) with IPS Technology, Retina 5K Display (5120 x 2880) with IPS Technology, 1600 x 900 TCO Certification Yes - Ports USB Port 2.0 (No.) 2 - USB Port 3.0 (No.) 2 - VGA Port Available - HDMI Port Available - Thunderbolt Port (No.) Not-Available - Display Port Not-Available - Input Devices Keyboard Standard with USB Interface - Mouse Optical Scroll with USB Interface - Audio Integrated Stereo Sound with internal speakers & Mic. - Connectivity Wi-fi Connectivity 802.11 ac - Bluetooth Connectivity 4.0 or higher - LAN Port Integrated Gigabit Ethernet 10/100/1000 - Certification BIS Registration under CRS of Meity Yes - BIS Registration no - - Certifications Available Energy Star - ROHS Compliance Yes - Power Maximum Wattage (Watts) 250 - Power Efficiency (%) Minimum 80 - Others Webcam HD - DVD R/W Available - 2/3 Optical drive Integrated - Stand Standard - On Site OEM Warranty (Year) 3 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Amrendra Kumar 110034, Office of the Executive Engineer PWD Div. West Road -2, Road No. 43, Sainik Vihar Delhi-110034 1 15
Slips post in slip Experience with Gov. Required 5 Year (s) Slips Post In Slip ( 500 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Type Type Slips Slips, Slip Book, Special Slip Type of Slip Sticky * Type of Labels Slips Slips, Special Slip Type of binding of slip Neon colour * Certification Slip paper Confirming Indian Standards IS 1848: latest Others * Grammage (GSM) Grammage of top and bottom pulp board (g/m2) 92 90-200 Dimension of Slip Length of Slip (mm) 77 76-297 Width of Slip (mm) 77 76-210 Height of Slip (mm) 77 76-297 Dimension of Base Paper Length of base Paper (mm) 77 76-297 1/2 Width of base paper (mm) 77 76-210 Height of base Paper (mm) 77 76-297 Colour Colour of Slips yellow * Coloue of cover board ALL * Packing Numbers of Slip in a Pack (Nos) 100 Any applicable numeric value * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sudarshan Prasad Yadav 492002, C/O Sudarshan Prasad Yadav, GAD-11 (Stationary), Room No. AA1-4, First Floor, Mahanadi Bhawan, Sector 19, Naya Raipur 500 15
Slips post in slip Experience with Gov. Required 5 Year (s) Slips Post In Slip ( 500 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Type Type Slips Slips Type of Slip Sticky * Type of Labels Slips Slips Type of binding of slip Neon colour * Certification Slip paper Confirming Indian Standards IS 1848: latest Others * Grammage (GSM) Grammage of top and bottom pulp board (g/m2) 90 90-200 Dimension of Slip Length of Slip (mm) 76 76-297 Width of Slip (mm) 76 76-210 Height of Slip (mm) 76 76-297 Dimension of Base Paper Length of base Paper (mm) 76 76-297 Width of base paper (mm) 76 76-210 1/2 Height of base Paper (mm) 76 76-297 Colour Colour of Slips yellow * Coloue of cover board ALL * Packing Numbers of Slip in a Pack (Nos) 100 100 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sudarshan Prasad Yadav 492002, C/O Sudarshan Prasad Yadav, GAD-11 (Stationary), Room No. AA1-4, First Floor, Mahanadi Bhawan, Sector 19, Naya Raipur 500 15
household disinfectants or disinfectant fluids phenolic type Household Disinfectants Or Disinfectant Fluids Phenolic Type ( 200 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 1061:Latest Yes - ISI Marking false true, false Yes is better CML Number 9169691 - Test Report Details Availability of Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification Yes Yes, NO Test Report Number SL/GP001/070416 - Test Report Date 12/01/2016 - Name of the Lab SHREEJI ANALYTICAL & RESEARCH LABORATORIES PVT. LTD. - Address of the Lab 1-A BALIJI TULSIYAN INDUSTRIAL ESTATE GRAM KUMEDI, NEAR MR 10 INDORE - Test Report shall be Yes - 1/3 furnish to Buyer on Demand Classification Class White White Grade 1 1, 2, 3, 1A, 2A, 3A Type Normal Normal Material Composition White Fluid : Coaltar acids or similar acids derived from petroleum, Phenolic compounds and suitable emulsifier Black Fluid : Coaltar acids or similar acids derived from petroleum, Phenolic compounds and suitable emulsifier, White Fluid : Coaltar acids or similar acids derived from petroleum, Phenolic compounds and suitable emulsifier Ingredients Added NA Hydrocarbons, Substituted phenolic compounds, Hydrocarbons and Substituted phenolic compounds, NA Colour Colour White - Capacity Capacity (Litre) 5 5 Phenol Coefficient Phenol Coefficient Staphylococcal (SA) Coefficient - Value of Phenol Coefficient 5 - Packing Packing New, Sound Non- Returnable MS Drums conforming to IS:2552/89 grade B-1 and Inside of the drum shall be given suitable protective coating - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Manzoor Ahmad Khan 190001, Karan Nagar, Balgarden 200 15
dc power supply Dc Power Supply ( 10 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values FUNCTIONAL Maximum Power (Watt) 120 watts * DC Current Output Rating (Ampere) 0 to 4 * DC Voltage Output Rating (Volt) 0 to 30 * Load Regulation (Voltage) ± (% of output + offset) less than 0.01 +2 (milli volt) * Load Regulation (Current) ± (% of output + offset) less than 0.05 + 1.5 mA * Line Regulation (Voltage) ± (% of output + offset) less than 0.01 + 1 mV * Line Regulation (Current) ± (% of output + offset) less than 0.05 + 0.1 mA * Over Voltage Protection Accuracy +- 0.5 + 0.5 V * Over Voltage Protection Response Time (milli less than 10 milli second * 1/3 sec) Ripple and Noise Voltage (20 Hz to 20 MHz) less than 1 mVrms less than 4 mVpp * . Ripple and Noise Current (20 Hz to 20 MHz) less than 4 milli amps rms * Readback Voltage Accuracy 0.05 + 10 mV * Readback Current Accuracy 0.15 + 5 mA * Read back Voltage Resolution (mV) 1 * Readback Current Resolution (mA) 0.1 * CONSTRUCTIONAL PC Interface USB/GPIB/RS232/LXI * Weight (gms) less than 12 kg * Warranty (Year) 1 1, 2 CERTIFICATIONS Operating Temperature (Degree C) 50 * Gperating Humidity (RH) (%) 0 * Availability of Test Reports from Central Govt/NABL approved ILAC acredited lab to prove conformity to the specification including environmental tests as under : (a) Dry Heat : For 16 hrs. at a temp. of 55 degree C in accordance with IS:900 0/part-3/section-5/1977 (reaffirmed in 2007). (b) Cold Test : For 4 hrs. at a temp. of -20 degree C in accordance with IS:9000/part-2/sec tion-4/1977 (reaffirmed in 2007). (c) Damp Heat (Cyclic)Test : For 2 Cycles of 24 h each at a temp. of 40 degree C & 95% RH in accordance with IS:900 0/part-5/section-1 1991 (reaffirmed in 2007). After environmental conditioning sequence Yes * 2/3 as above and a recovery period of two hours, the instrument shall be checked for complete functional parameters, which should be with in limits.(Test reports are to be furnished when demanded by buyer) Test Report No. ACPH/Test/11SG627AE 3 * Test Report Date 3/2/2018 * Name and address of the Lab Shreeg LED Raipur Chhattishgarh * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mukesh Shukla 492001, O/o Executive Engineer, (E&M) Public Works Department Sirpur Bhawan Parisar, Raipur. (C.G.) 10 15
dc power supply Dc Power Supply ( 25 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values FUNCTIONAL Maximum Power (Watt) 120 watts * DC Current Output Rating (Ampere) 0 to 4 * DC Voltage Output Rating (Volt) 0 to 30 * Load Regulation (Voltage) ± (% of output + offset) less than 0.01 +2 (milli volt) * Load Regulation (Current) ± (% of output + offset) less than 0.05 + 1.5 mA * Line Regulation (Voltage) ± (% of output + offset) less than 0.01 + 1 mV * Line Regulation (Current) ± (% of output + offset) less than 0.05 + 0.1 mA * Over Voltage Protection Accuracy +- 0.5 + 0.5 V * Over Voltage Protection Response Time (milli less than 10 milli second * 1/3 sec) Ripple and Noise Voltage (20 Hz to 20 MHz) less than 1 mVrms less than 4 mVpp * . Ripple and Noise Current (20 Hz to 20 MHz) less than 4 milli amps rms * Readback Voltage Accuracy 0.05 + 10 mV * Readback Current Accuracy 0.15 + 5 mA * Read back Voltage Resolution (mV) 1 * Readback Current Resolution (mA) 0.1 * CONSTRUCTIONAL PC Interface USB/GPIB/RS232/LXI * Weight (gms) less than 12 kg * Warranty (Year) 1 1, 2 CERTIFICATIONS Operating Temperature (Degree C) 50 * Gperating Humidity (RH) (%) 0 * Availability of Test Reports from Central Govt/NABL approved ILAC acredited lab to prove conformity to the specification including environmental tests as under : (a) Dry Heat : For 16 hrs. at a temp. of 55 degree C in accordance with IS:900 0/part-3/section-5/1977 (reaffirmed in 2007). (b) Cold Test : For 4 hrs. at a temp. of -20 degree C in accordance with IS:9000/part-2/sec tion-4/1977 (reaffirmed in 2007). (c) Damp Heat (Cyclic)Test : For 2 Cycles of 24 h each at a temp. of 40 degree C & 95% RH in accordance with IS:900 0/part-5/section-1 1991 (reaffirmed in 2007). After environmental conditioning sequence Yes * 2/3 as above and a recovery period of two hours, the instrument shall be checked for complete functional parameters, which should be with in limits.(Test reports are to be furnished when demanded by buyer) Test Report No. RLLPC/Test/SGPX887 * Test Report Date 3/2/2018 * Name and address of the Lab Shreeg LED Raipur Chhattisgarh * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mukesh Shukla 492001, O/o Executive Engineer, (E&M) Public Works Department Sirpur Bhawan Parisar, Raipur. (C.G.) 25 15
hopper or tipper Hopper Or Tipper ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, - Main Engine Capacity (cc) 702 - Make of Chassis - - Type of Chassis Frame - - Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) Fuel Consumption ( declared by OEM as 21.5 1/6 certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) Speed, Max (Km/Hr) 60 - Main Engine Aspiration Natural Aspiration Natural Aspiration, Turbocharged, Supercharged, Turbocharged+ Supercharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 30 Gradeability of Vehicle with load( %) 16.38 - Gradeability of Vehicle without load ( %) 18 - Ground Clearance (mm) 160 Wheel Base (mm) 2100 - Kerb Weight (Kg) 720 Gross Vehicle Weight (Kg) 1700 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - - Type of Front Axle and Suspension System - - Type of Rear Axle and Suspension System - - Type of BIS MARKED Vehicle Tyre Tube - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 4 - Type of Steering Manual Manual, Power Operated Turning Radius, Min (mm) 4300 Speed Governers No - 2/6 ABS Fitted No - Front Vehicle Brake - - Rear Vehicle Brake - - Type of Clutch - - Tipping Angle (Degree) 48 Tipper Container cap acity/Volume(cubic metres) 2.5 Certification Chassis Certification ARAI/VRDE/ICAT No. - - Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 12 - No. Of Free Service (Nos) 5 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3800 - Width of Chassis (mm) 1500 - Height of Chassis (mm) 1845 - Size Of Front Tyres (mm) - - Size Of Rear Tyres (mm) - - Size of Wheel (mm) 4 Tipper body Pivot length (mm) 1546 - Tipper body Length (mm) 2165 - Tipper Body Height (mm) 672 - Overall Height of Tipper from Ground (mm) 1491 - Body Plate Thickness (mm) 2 Main Frame Thickness (mm) 3 Pneumatic System true - Hydarulic System true - 3/6 Tipping Hydraulic Cylinders(Make) - - Hydraulic System Driven by Main Engine - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation true - Auxiliary Diesel Engine Transmission - - Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Steel, Aluminium, Chromium Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Dumping Height (mm) 354 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter true - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 4/6 1 Dalip Kumar Abrol 182141, OFFICE OF THE MUNICIPAL COMMITTEE CHENANI 1 15
Multifunction Machines
scanners
Desktops Desktops ( 4 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel Intel, AMD Processor Generation 8th 6th, 7th, 8th Processor Intel Celeron J4005 (2.0 GHz, 4MB Cache, 2 Cores) As per GeM Catalogue. Motherboard Chipset Intel H110 As per GeM Catalogue. Expansion Slots (PCIe x 1) (Number) 1 - Expansion Slots (PCIe x 4) (Number) 0 - Expansion Slots (PCIe x 16) (Number) 1 - Graphics Graphics Type Integrated - Graphic Memory N/A - Operating System Operating System (Pre-Loaded) DOS Windows 10 Professional, Linux, DOS, Windows 10 Home, Windows 10 Professional under Microsoft Shape the Future Program RAM Type of RAM DDR 4 - 1/3 RAM Size (GB) 4 4, 8, 16, 32 (or higher) RAM Expandability upto (GB) 16 16, 32, 64 (or higher) RAM Speed (MHz) 2400 - Storage Hard Disk (GB) 1000 500, 1000, 2000 (or higher) Cabinet Cabinet Small Form Factor - Cabinet Volume (Litres) - - Internal Bays 1 - External Bays (Number) 0 - DIMM Slots (Number) 2 - Connectivity Wireless Wi-Fi 802.11ac + Bluetooth - Network Connectivity 10/100/1000 on board Integrated Gigabit Port - Ports USB Port 2.0 (Number) 2 - USB Port 3.0 (Number) 4 - Serial Port true - Parallel Port false - VGA true - HDMI true - Display Port false - Monitor Monitor Size (INCHES) 19.5 18.5, 19.5, 21.5, 24, 27 (or higher) Monitor Resolution (PIXELS) 1440 x 900 1366x768, 1920x1080, 3200x1800, 3840 x 2160, 1440 x 900, 1600 x 900 Monitor Certification - - Power Power Supply (Watt) - - Minimum Power Efficiency(%) 85 - Certification ROHS Compliance Yes - BEE/Energy Star for the given Model true - Input Devices Mouse Optical - Keyboard Standard - Generic Optical Drive DVD R/W - Internal Speaker false - 2/3 On Site OEM Warranty (Year) 3 3, 5 (or higher) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Omprakash Jangid 326001, godam ki talai 4 15
solar water heating system Experience with Gov. Required 2 Year (s) Solar Water Heating System ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to standards for Solar water Heating System -Code for Acceptance IS:12976:1990 with latest amendment - BIS Approved Yes Yes If Yes, Mention CM/L No. otherwise write NA 6200092699 - Model Number of Solar Water Heater System 500 LPD - Solar water Heating System Compatibility with Heat Exchange Solar water Heating System with Heat Exchanger Solar water Heating System with Heat Exchanger Region Type 2 Warm (Areas where ambient temp. is moderate and do not normally below 5 Deg. C - Rated Capacity in Litres per Day (LPD) 500 500 Warranty (Years) 5 Years 5 Years CONSTRUCTIONAL Aperture area of collector, Sq. 3.6 3.6 1/6 Meteres (Sq Meter) Electrical Heater ( Back up ) Capacity (kw) 2 2 Capacity of Make up tank( SWHS with Heat Exchanger only ) (Ltrs) 5.0 5.0 Solar Flat Plate shall be BIS marked and as per IS :12933/2003 with amendment 1 to 3 Yes - Type of Cover Plate conforming to IS 12933/2003 Made up of Toughened Glass with thickness 4.00 mm minimum Made up of Toughened Glass with thickness 4.00 mm minimum Solar Transmittance for cover plate at normal Incidence (%) 82 - Material for Collector Box Aluminium Aluminium Numbers of collectors 4 - Minimum Channel Section Thickness for sides ( For Al based) >/= 1.4 mm for aluminium based - Minimum Thickness of Sheet for Bottom ( For Al based) >/= 0.45 mm for aluminium based - Minimum Thickness of Sheet used as Support for Glass retaining ( For Al based) >/= 1.2 mm for aluminium based - Thickness of Sheet for entire body >/= 1.0 mm for aluminium based - CRCA Material Thickness >/= 0.91 mm for CRCA - Riser and Header assembly designed for working pressure Riser and Header assembly designed for working pressure 24.5 k pa tested for leakage at a minimum hydraulic pressure of 490 K pa - Number of absorber sheets per collector 9 - Numbers of Header Tubes 9 - Numbers of Riser Tubes 9 - Diameter of Header Tube (mm) >/= 24.5 mm - 2/6 Thickness of Header Tube (mm) >/=0.71 - Thickness of Riser Tube (mm) >/= 0.56 mm - Material of Riser Header for Absorber Copper Only - Distanace Between Risers from center to center (mm) >/= 120 (mm) - Material of sheet for absorber Copper Copper Collector Box Insulation Back and sides - Thermal Resistance of Insulation in Square Degree for Back Face >/=0.96 W/Km - Thermal Resistance of Insulation in Square Degree for Side Face >/=0.47 W/Km - Gasket and Grommets shall confirm to IS 12933/2003 with latest amdt Yes - Material for Hot water storage Tank SS304 SS304 Name the Material if choose others SILICON RING - Non Pressure Type Hot water Storage Tank Yes - Position of Hot water tank Horizontal - Thickness of sheet of Hot water tank (mm) 2.8 - Hot water Tank Insulation Density ( High density PUF insulation for 32 kg meter cube or higher density (mm) >/=40 - Hot water Welding TIG - Coating Material for Hot water tank Polyster Epoxy Plus Balck Epoxy based Paint - Thickness of Coating (micron) 50 - Tank stand Material Mild Steel - Size of Tank Stand (L x W x H ) Must be Yes - 3/6 Greater Than 38 x 38 x 4 (mm3) Type of Heat Exchanger cage Type - Material for Heat Exchanger Stainless steel Stainless steel Thickness of tube of heat Exchanger, Minimum 22 SWG Yes - Heat Transfer Rate for heat Exchanger Must be greater than 0.24 sq meter per 100 LPD capacity - Numbers of Electrical Heaters ( Back Up Type ) provided 2 2 Collector Stand Material Mild steel - Size of Collector Tank Stand (L x W x H ) Must be Greater Than 38 x38 x 4 (mm3) Yes - System Interconnecting Pipes material G.I Pipes as per IS: 1239 - if other mention the Material for interconnecting pipes GI - Size of interconnecting Pipes (mm) 24 - Tank test Pressure (bar) 5 - System Working Pressure (Bar) 1 - Inlet and Outlet Valve Yes - Temp Gauge( for Hot Water ) Yes - Gun Metal Strainer ( for Cold Water ) Yes - Water Meter Yes - Gasket for Flanges 3 mm thick gasket of neoprene - Electrical Back up Control panel Yes - Make of Control Panel Schneider - if others, mention the make of Control Panel NA - 4/6 Weight of solar water heater system (kg) 150 - CERTIFICATIONS Availability of Test Report as per IS : 6893-6 (1985) used for purcahse specification for Machine Tools, Part 6 Bench/Pillar type Drill Machine with latest amndmt.from Central Govt./NABL/ILAC acredited lab to prove confirmity to specification yes - Test Report No. MKU/RTC/18/206 - Test Report Date 13/09/2017 - Name of the Lab RTC - Address of the Lab MADHUR KAMRAJ UNIVERSITY - Availability of Schematic Drawing Yes - Instruction Manual for installation, Repair and maintanance Yes - test teat1 true - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ravindra Singh Gaur 462003, Managing DIrector, MP Rajya Pashu Dhan Evam Kukkut Vikas Nigam, New Broiler Bhawan Main Road No 3 Kotra Sultanabad Bhopal 1 15
Multimedia Projectors
diesel generators- DG Sets Experience with Gov. Required 4 Year (s) Diesel Generators- DG Sets ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values OUTPUT CAPACITY RATING/PHASE Nominal Rated Capacity (KVA) 15 As per GeM Catalogue. (or higher) No of Phase - Single phase, Three Phase ENGINE Make of Engine - - Model Number of Engine - - Capacity of Engine (cc) - - Engine Power (kWm) - - ISI Marking to IS :10001 for engine true - Type of Engine cooling Air Cooled Air Cooled, Liquid Cooled Type of governer Mechanical Mechanical, Electronic (or higher) Class of governer A1 A0, A1, A2 (or higher) Number of cylinders (nos) 2 - No of Strokes (nos) 4 - 1/4 Rated RPM of Engine (RPM) - 1500, 3000 Overload capacity for one hour for every 11 hours continuous running at full load (%) 8 - Specific Fuel Consumption (gm/kWh) - - Starting voltage (volt) 12 - ALTERNATOR AC GENERATOR(ALTER NATOR) Make - - AC GENERATOR(ALTER NATOR) model Number - - Rating of AC Generator (KVA) 15 - Power Factor of AC generator 0.8 - Efficiency at rated Power factor at 75% of full Load 70 - Compliance of Alternator to IS:13364(part-1) Yes - Type of alternator Brushless - Voltage Regulation Grade VG 1 - Alternator IP Rating IP 21 - Class of Insulation H - CONTROL PANEL Control Panel AMF Manual, AMF IP Rating of Control Panel IP 53 - ACOUSTIC ENCLOSURE Sheet Thickness 2 1.6, 1.8, 2, 1.2 Higher is better Thickness of Foam 80 - Density of Foam for sound insulation 45 - Noise level at 1 meter (dB) 75 - BATTERY Battery Type & Specification Normal lead acid to IS: 7372 for motor vehicles - Battery capacity (Ah) - - No of batteries 1 - TEST REPORTS Availability of Type test report for Engine from Central govt/NABL/ILAC No - 2/4 accredited laboratory Test Report number and date(Engine) - - Name and address of laboratory(Engine) - - Availability of Type test report for Alternator from Central government/NABL/ILAC accredited laboratory No - Test Report number and date(Alternator) - - Name and address of laboratory(Alternator) - - DG set meet requirements of Enviro nmental(Protection) Rules 1986, in respect of noise and emission norms, as described in STC Yes - WARRANTY INSTALLATION & COMMISSIONING Warranty 2 Installation & Commissioning With Installation With Installation, Without Installation Agreed to STC of the Product Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vilas Dattatraya Kulkarni 425504, Director, Dadasaheb choudhry forest training institute, pal tah..raver, dist..Jalgaon 1 15
Notebook Computers-laptop
All in one All In One ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel - Processor Generation 7th 6th, 7th, 8th Processor Intel Core i3-7100 (3.9 GHz, 3 MB Cache, 2 Cores) Intel Core i3-7100 (3.9 GHz, 2 Cores) Chipset Chipset Intel H110 - Graphics Graphics type Integrated - Graphic Card Description INTEL HD GRAPHICS 620 - Storage Type of Hard disk drive SATA SATA, SSD, Fusion Hard Disk Drive Size (GB) 1000 500, 1000, 2000 (or higher) Hard disk drive speed (RPM) 7200 - RAM Type of RAM DDR4 - RAM Size (GB) 4 4, 8, 16, 32 RAM Expandability Upto (GB) 16 8, 32, Not- Available Ram speed (MHz) 2400 - 1/3 Operating System Operating system Windows 10 Home Windows 10 Home, Windows 10 Professional, Linux, Mac OS Sierra, Mac OS High Sierra OS Certification Windows - Display Display Size (Inch) 21.5 21.5 Type of Display Non Touch Touch, Non Touch display resolution (Pixels) 1920 x 1080 1920 x 1080, 3200 x 1800, 1920 x 1080 with IPS Technology, Retina 4K Display (4096 x 2304) with IPS Technology, Retina 5K Display (5120 x 2880) with IPS Technology, 1600 x 900 TCO Certification Yes - Ports USB Port 2.0 (No.) 2 - USB Port 3.0 (No.) 2 - VGA Port Not-Available - HDMI Port Available - Thunderbolt Port (No.) 1 - Display Port Available - Input Devices Keyboard Standard with USB Interface - Mouse Optical Scroll with USB Interface - Audio Integrated Stereo Sound with internal speakers & Mic. - Connectivity Wi-fi Connectivity 802.11 ac - Bluetooth Connectivity 4.0 or higher - LAN Port Integrated Gigabit Ethernet 10/100/1000 - Certification BIS Registration under CRS of Meity Yes - BIS Registration no - - Certifications Available Energy Star - ROHS Compliance Yes - Power Maximum Wattage (Watts) 65 - Power Efficiency (%) Minimum 80 - Others Webcam Full HD - 2/3 DVD R/W Available - Optical drive Integrated - Stand Standard - On Site OEM Warranty (Year) 3 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sandeep Gupta 465001, DeGS Office shajapur 2 15
Potable water purification system Potable Water Purification System ( 3 ) Technical Specifications Specification Specification Name Values Allowed Values EQUIPMENT TYPE & FEATURES Type Electrically Operated Reverse Osmosis based water purifier Electrically Operated Reverse Osmosis based water purifier, Gravity operated water purifier, Water Purifier electro- deionization Based Ultraviolet (UV) LAMP Yes Yes, No Ultra Voilet (UV) Lamp power consumption 11 - STANDARDS Conformity to Indian Standrad for System IS 14724 (latest) for water purification system with Ultraviolet disinfection - Number of float valves/sensors 2 INPUT PARAMETERS Input Water TDS 2000 1000, 2000, 3000, 4000, 5000 OUTPUT PARAMETERS Recovery at 27 degree Centigrade 25-35 25-35, 30-40, 90-100, 70-80, 50-60 Output Water of RO system Conforming to Indian Standard IS 10500(latest) - Output water capacity 50 10, 25, 50, 100, 250, 500, 750 1/3 (Litre/Hour): Arsenic and Floride removal capability true true, false Yes is better Misc, warranty etc Thin-film composite membrane Yes Yes, No, NA High Pressure Pump Yes - Raw water/Chemical Raw water/Chemical Cleaning PUMP Yes Yes, No Pre Filter Vessels: Yes Yes, No Micron Filter Yes Yes, No Membrane Housing Yes Yes, NA Auto cut Yes Yes, No No of candles (Nos) 3 Installation Type Floor mounted Table top, Wall mounted, Floor mounted, Floor mounted & enclosed Warranty period ( for free replacement of machine 1 2, 3, 1 Higher is better Warranty Period (for scope including free of cost candle and activated carbon onsite replacement twice a year) 1 2, 1 Higher is better Antiscalant- where silica is up to 100 ppm/where Mica is up to 100 ppm Yes Yes, NA Chloride & Flouride removal facility Yes with Pump Yes with Pump, Yes without pump, No Test Report Availability of type test report(Design Evalution Reports) as per IS:14724 and IS 10500 - - Test certificate No and date: - - Name and Address of laboratory which conducted Test: - - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 2/3 1 NIRMAL KUMAR JAIN 327001, HDJ GOVT.GIRLS COLLEGE BANSWARA NEAR OLD BUS STAND BANSWARA (RAJASTHAN) 3 15
Notebook Computers-laptop
chairs-office Chairs-office ( 150 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS 3499 (Part-1) Latest true - Chair Type With Arms With Arms Type of Seat and Backrest Padded with Polyurethane Foam Made of Polythene cane, Padded with Polyurethane Foam, moulded plywood, injection moulded Polypropylene, Seat made of padded with polyurethane foam and Backrest made of Mesh with support of injection moulded polypropylene Frame Type 4 Legs 4 Legs Castors With With, Without MATERIAL Type of Wood used in Polythene cane Chair NOT APPLICABLE solid wood, teak wood, hot pressed board, plastic net, NOT APPLICABLE Material of Fabric Back Cover leather foam leather foam Thickness of Plywood used in 15 mm 12 mm, 15 mm, 18 mm, 20 mm, 25 mm, 1/4 Backrest IN MM (±1 mm) 30 mm, 35 mm, 40 mm, N.A Frame Material chrome on MS MS, wood, CRCA ERW round pipe, ERW pipe, CRCA pipe with wooden sheet, STAINLESS STEEL, STAINLESS STEEL 304, STAINLESS STEEL 202, chrome on MS Density of Polyurethane Foam Used in Seat ±2 (Kg/Cub M) 32 Kg/Cub.M - Material of Fabric of Seat Cover leather foam black leatherite, leather foam, knitted with cane, fabric, polyurathane, N.A Density of Polyurethane Foam Used in Backrest ±2(Kg/Cub M) 32 Kg/Cub.M - Thickness of Plywood used in Seat ±1(mm) 18 mm 12 mm, 30 mm, N.A GSM/Thickness of Fabric ±5 (Gram per Sq Meter) N.A 80 Gram per Sq Meter, 220 Gram per Sq Meter, 250 Gram per Sq Meter, 290 Gram per Sq Meter, N.A Arm Material Padded Cushion Upholsted With Leather On Metal Padded Cushion Upholsted With Leather On Metal Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 3 mm) 65 mm 25 mm, 50 mm, 62 mm, 65 mm, 70 mm, N.A, 40 mm Thickness of Polyurethane Foam Used in Seat IN MM (+/- 3 mm) 75 mm 15 mm, 60 mm, 75 mm, 80 mm Shoe Type rubber - DIMENSION Size of Material (mm) 2 mm thick 25 mm tube 14 SWG 25 mm round pipe, 16 SWG 30 mm round pipe, 2 mm thick 25 mm tube, 40 mm teak wood, 16 gauge tubular pipe Chair Height ±15(mm) 850 mm 700 mm, 750 mm, 800 mm, 830 mm, 2/4 850 mm, 890 mm, 950 mm, 1000 mm, 1050 mm, 1100 mm Seat Depth ±10(mm) 600 mm 350 mm, 400 mm, 430 mm, 450 mm, 500 mm, 550 mm, 580 mm, 600 mm, 650 mm, 720 mm Seat Width ±10 (mm) 550 mm 350 mm, 380 mm, 470 mm, 650 mm Seat Height IN MM ±5(mm) 430 400, 430, 460, 480, 500, 380 Backrest Width ±10(mm) 450 mm 350 mm, 480 mm Backrest Height ±10(mm) 450 mm As per GeM Catalogue. Arm Length ±5(mm) 400 mm 200 mm, 250 mm, 300 mm, 350 mm, 490 mm Arm Width ±2(mm) 50 mm 25 mm, N.A COLOUR & FINISH Colour of Fabric for Seat and Backrest black - Paint Type chrome chrome, epoxy polyster, polished, synthetic enamel, powder coated on MS, N.A Colour of Paint white - CERTIFICATION Polythene cane conforming to Type-1 of IS 5378/1994 NA - Test reports to be furnished to buyer on demand YES YES, NO BIFMA certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO 3/4 OEM of offered product is ISO 18001:2007 certified NO YES, NO WARRANTY Warranty period in number of years 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 NIRMAL KUMAR JAIN 327001, HDJ GOVT.GIRLS COLLEGE BANSWARA NEAR OLD BUS STAND BANSWARA (RAJASTHAN) 150 15
chairs-office Chairs-office ( 20 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS 3499 (Part-1) Latest true - Chair Type With Arms With Arms, Without Arms Type of Seat and Backrest Seat made of padded with polyurethane foam and Backrest made of Mesh with support of injection moulded polypropylene Made of Polythene cane, Padded with Polyurethane Foam, moulded plywood, injection moulded Polypropylene, Seat made of padded with polyurethane foam and Backrest made of Mesh with support of injection moulded polypropylene Frame Type 4 Legs Cantilever, 4 Legs Castors Without With, Without MATERIAL Type of Wood used in Polythene cane Chair solid wood solid wood, teak wood, hot pressed board, plastic net, NOT APPLICABLE Material of Fabric Back Cover leather knitted with cane, leather foam, leather, leatherite 1/5, polyster, N.A Thickness of Plywood used in Backrest IN MM (±1 mm) 12 mm 12 mm, 15 mm, 18 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, N.A Frame Material wood MS, wood, CRCA ERW round pipe, ERW pipe, CRCA pipe with wooden sheet, STAINLESS STEEL, STAINLESS STEEL 304, STAINLESS STEEL 202, chrome on MS Density of Polyurethane Foam Used in Seat ±2 (Kg/Cub M) 40 Kg/Cub.M - Material of Fabric of Seat Cover leather foam black leatherite, knitted with cane, fabric, polyurathane, N.A Density of Polyurethane Foam Used in Backrest ±2(Kg/Cub M) 40 Kg/Cub.M - Thickness of Plywood used in Seat ±1(mm) N.A 12 mm, N.A GSM/Thickness of Fabric ±5 (Gram per Sq Meter) N.A 80 Gram per Sq Meter, 220 Gram per Sq Meter, 250 Gram per Sq Meter, 290 Gram per Sq Meter, N.A Arm Material Padded Cushion Upholsted With Leather On Metal As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 3 mm) 50 mm 25 mm, 50 mm, 62 mm, 65 mm, 70 mm, N.A, 40 mm Thickness of Polyurethane Foam Used in Seat IN MM (+/- 3 mm) 20 mm 15 mm, 60 mm, 75 mm, 80 mm Shoe Type rubber - DIMENSION Size of Material (mm) 40 mm teak wood 14 SWG 25 mm round pipe, 16 SWG 30 mm round pipe, 2 mm thick 25 mm tube, 40 mm teak wood, 16 2/5 gauge tubular pipe Chair Height ±15(mm) 1000 mm 700 mm, 750 mm, 800 mm, 830 mm, 850 mm, 890 mm, 950 mm, 1000 mm, 1050 mm, 1100 mm Seat Depth ±10(mm) 450 mm 350 mm, 400 mm, 430 mm, 450 mm, 500 mm, 550 mm, 580 mm, 600 mm, 650 mm, 720 mm Seat Width ±10 (mm) 500 mm 350 mm, 380 mm, 470 mm, 650 mm Seat Height IN MM ±5(mm) 460 400, 430, 460, 480, 500, 380 Backrest Width ±10(mm) 430 mm 350 mm, 480 mm Backrest Height ±10(mm) 450 mm As per GeM Catalogue. Arm Length ±5(mm) 300 mm 200 mm, 250 mm, 300 mm, 350 mm, 490 mm Arm Width ±2(mm) 40 mm 25 mm, N.A COLOUR & FINISH Colour of Fabric for Seat and Backrest black - Paint Type powder coated on MS chrome, epoxy polyster, polished, synthetic enamel, powder coated on MS, N.A Colour of Paint black - CERTIFICATION Polythene cane conforming to Type-1 of IS 5378/1994 YES - Test reports to be furnished to buyer on demand YES YES, NO BIFMA certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO 3/5 OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO WARRANTY Warranty period in number of years 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 NIRMAL KUMAR JAIN 327001, HDJ GOVT.GIRLS COLLEGE BANSWARA NEAR OLD BUS STAND BANSWARA (RAJASTHAN) 20 15
Lamp Ballast for HPSV Lamps, Lamp starter (Ignitors - Starting device) for HPSV Lamps, Metal Hal Lamp Ballast For HPSV Lamps ( 12 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Ballast for HPSV lamps (Excluding Tubular Flourescent Lamps) conforming to IS: 15882:2009 and all the ballasts specified in the standard shall meet the requirements of IS: 15885(Part-1):2011 latest and IS: 15885(Pa rt-2/Section-9): 2011 latest Yes - ISI Marked Yes Yes, No ISI marked if yes declare CM/L Number If 'No' write NA NA - Ballast Wattage (in Watts) 150 W 150 W Operating Voltage 220 Volt -240 Volt - Supply frequency (in Hz) 50 Hz +/-5% - CONSTRUCTIONAL Ballast constructional requirements as per IS:15885 (Part 1) shall apply Yes - 1/5 Winding material Copper wound - Supply current: At rated voltage, the supply current shall not differ by more than 10 percent from the value marked on the ballast when the latter is operated with a reference lamp Yes - Current wave form shall be as per Cl 9 of IS:15882:2009 latst Yes - Magnetic screening: The ballast shall be effectively screened against the influence of adjacent ferro- magnetic materials as pe Cl 10 of IS:15882:2009 latest Yes - Ballast setting: Power delivered at rated voltage as per Cl. 15.1 of IS:15882:2009 latest (Not Less than 95% and not more than 105% of the reference ballast when operated at the objective lamp voltage as given in IS:9974(Part2) Yes - Short Circuit current between 92% and 106% of rated voltage as per Cl. 15.2 of IS:15882:2009 latest Yes - Open circuit voltage between 92% and 106% of its rated voltage as per Cl. 15.3 of IS:15882:2009 latest Yes - Insulation resistance as per Cl. 11 of IS:15885 Part 1 : 2011 latest >/=2 M Ohm - Electric strength as per Cl. 12 of IS:15885 Part 1 : 2011 latest Yes - Rated Maximum operating temperature of ballast (Tw) (Ref. Cl. B.9.2 of IS:15885 part 105 deg C - 2/5 1:2011 latest) Ballast shall pass the thermal endurance test for winding of ballast as per Cl.13 of IS:15885 Part 1 :2011 latest Yes - Ballast shall pass High voltage test 5 KV for 5 Seconds Yes - Watt Loss 19 Watts maximum for 150 W Ballast - Cold resistance at 20 deg. C (Tolerance: t+5%, 10%) - must declare NA - Circuit power factor >/=0.85 - WARRANTY Guaranteed period of replacement 1 Year - CERTIFICATION Marking: Apart from IS requirement each ballast shall be marked with serial number of ballast, Watt Loss, Tw details Yes - Availability of Type Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to IS specifications as appliacable Yes - Test Report Number NA - Name of Test Lab NA - Address of Test Lab NA - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mukesh Shukla 492001, O/o Executive Engineer, (E&M) Public Works Department Sirpur Bhawan Parisar, Raipur. (C.G.) 12 15 Lamp Starter (Ignitors - Starting Device) For HPSV Lamps, Metal Halide Lamps) ( 12 ) 3/5 Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard As per IS:12449 Part 1 - 1988 and Part 2 - 1988 latest - ISI Marked No Yes, No ISI marked if ''YES" declare BIS Licence number, If ''NO'' write NA NA - The lamp type for which the starting device (Ignitors) is suitable for Discharge Lamps (HPSV Lamps/Metal halide Lamps) - The lamp wattage for which the starting device (Ignitors) is suitable 70 W 70 W, 150 W, 250 W, 400 W Starting devices (Ignitors) for discharge lamps for use on ac supplies up to 1000 V, 50 Hz, which produces starting pulse not greater than 5 KV Yes - Starting device (Ignitors) shall pass the type test requirements as per Cl 7 (1) of IS:12449 Part 2 1988 latest Yes - CERTIFICATION Availability of Type Test Report from Central Government/NABL/ILAC accredited lab to prove conformity to specification Yes - All the test reports shall furnish to the buyer/consignee on demand Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mukesh Shukla 492001, (E&M) Public Works Department Sirpur 12 15 4/5 Bhawan Parisar, Raipur. (C.G.)
almirah- Steel Experience with Gov. Required 2 Year (s) Almirah- Steel ( 7 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS:3312 latest true * No of shelves (Nos) 5 * Type of Shelves Fixed * Locker Provided true * Locking System with the locker YES * Cloth hanging provision in the Almirah false * Number of Doors (Nos) 2 * Door Stiffner upto full door height Provided with the almirah doors true * Number of Hinges with each door (Nos) 2 * Number of Glass Sheet fixed in each Almirah door (Nos) N.A * 1/4 Construction Welded * Lock Three Way bolting device controlled by lock * MATERIAL Material M.S sheet conforming to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1 M.S sheet conforming to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1 Material of Almirah Doors M S Sheet M S Sheet Sheet Thickness of Locker 0.8 mm * Length of Glass Sheet ±10 (mm) N.A * Width of Glass Sheet ±10 (mm) N.A * Sheet Thickness of door in mm 0.8 mm (Minimum) * Sheet Thickness of sides, back, Top and Bottom 0.8 mm (Minimum) * Sheet Thickness of Shelves 0.8 mm * Sheet Thickness of Pedestal in mm 0.8 mm (Minimum) * Material of Lock Brass and steel finish * Material of Keys steel * DIMENSION Height (Without Pedestal) (in mm) (+/- 10 mm) 2000 1000, 1155, 1855, 1800, 2000, 850, 1050, 1325, 1450 Width in mm (± 7 mm) 910 760, 910, 1023, 700 Depth in mm (±5 mm) 480 430, 455, 480, 486, 270, 370, 400 Inside Height of Locker in mm (± 5 mm) N.A * Inside Width of Locker i mm (±5 mm) N.A * Inside Depth of Locker in mm (±5 mm) N.A * Width of Stiffner in mm (±5 mm) 115 mm * Thickness of MS Sheet of Stiffner (in mm) 0.8 mm * 2/4 Stiffened Pedestal height in mm (±2 mm) 120 * Pedestal Width in mm (±2 mm) 80 * COLOUR & FINISH Finish powder coated * Colour of Paint olive green * Packing: Bubble Sheet * CERTIFICATION ISI marked false * CM/L No. - * WARRANTY WARANTEE PERIOD IN NUMBER OF YEARS 1 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramesh Chand Soni 303108, Near Bus Stand KOTPUTLI 7 15
SPARE/Add on Battery Packs for Transreceiver- Handheld Average Turn Over of Last 3 Years 75 Lakh (s) Experience with Gov. Required 5 Year (s) SPARE/Add On Battery Packs For Transreceiver-Handheld ( 2800 ) Technical Specifications Specification Specification Name Values Allowed Values SPARE/Add on Battery Packs for Transreceiver- Handheld Battery Chemistry Li-ion NiMh, Li-ion, Li-polymer Rated Capacity ( mAh ) 2000 As per GeM Catalogue. "Nominal terminal Voltage (hint: 7- 2 V for NiMh batteries and 7-4 V for Li-ion and Li-polymer batteries) 7.4 7.2, 7.4 OEM part number PMNN4463AB - Governing Specification MHA QR OEM Specification, MHA QR Governing Specification (MHA QR) has been seen and understood Yes Yes, NA for OEM Specification NAME of batery manufacturer and Battery Make Sanmina- Sci Systems (Malaysia) SDN BHD. MAKE : Motorola - Compatible MAKE of Transreceivers Motorola As per GeM Catalogue. 1/3 Compatible Model of Transreceivers supported XIRP8668 As per GeM Catalogue. BIS certification to IS: 16046 (latest) under Compulsory Registration Scheme (CRS) Yes - BIS REGISTRATION NUMBER R-41041815 - Additional Features, if any NA - Warranty 12 12, 18 CERTIFICATION Availability of Test Reports from Central Govt/NABL approved/ILAC accredited Lab to prove Conformity to the Governing specification true If Yes, Test Report to be furnished to the Buyer on demand Yes - Test Report No and Date R-41041815 DATED 13/07/2016 - Name of the Lab and Address BIS - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sunita Sharma 226006, UP POLICE TELECOM HQRS, MAHANAGAR 2800 30
Notebook Computers-laptop
hot or cold water dispenser Hot Or Cold Water Dispenser ( 8 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Type and Function Type Floor Mounted * Function Hot, Cold and Normal * Test Report Details Availability of test reports from Central Govt./NABL/ILAC accredited Lab covering all the parameters Yes * Test Report No. 400079 * Test Report date 01/04/2018 * Name of Test lab NABL PKL HRAYANA * Address of the Test lab. NABL PKL HRAYANA * Material Material of Cabinet PLASTIC * Material of cooling water chamber MATALLIC * Material of heating chamber MATALLIC * Flow Rate and Capacity Flow rate (Litres/hr.) 2.5 Any applicable numeric value 1/3 Cold water storage capacity (Litres) 32 Any applicable numeric value Cooling capacity (litres/hr.) 2.5 Any applicable numeric value Hot water storage capacity (Litres) 3.2 Any applicable numeric value Heating capacity (litres/hr.) 2.5 Any applicable numeric value Power Consumption Power supply (volts) 230 * Cooling power consumption (Watts) 230 Any applicable numeric value Heating power consumption (Watts) 500 Any applicable numeric value Energy saving mode false true, false Temperature Cooling temperature levels (Degree celsius) 2 Any applicable numeric value Heating temperature levels (Degree celsius) 45 Any applicable numeric value Other Physical Characteristics Tough, durable and corrosion resistant cabinet Yes * CFC free Eco friendly Refrigerant Type Yes * Child lock for hot water for faucet true true, false Drip Tray true true, false Overheat protection true true, false Hot and cold water ready indicators Yes * Number of faucets (Nos.) 3 Any applicable numeric value Over all dimensions (mmXmmXmm) 310X315X934 Any applicable text(s) Net weight (Kgs.) 17.1 Any applicable numeric value Warranty (Years) 1 1, 2, 3, 4 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Anand Parkash 131001, Govt. Polytechnic Rathdhana Road 8 15 2/3
Line Intractive UPS with AVR Line Intractive UPS With AVR ( 33 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values GENERIC Rating in KVA/min VAH capacity of battery (KVA/VAH) 1.0/168 1.0/168 Technology MOSFET-PWM MOSFET-PWM, IGBT- PWM Type of battery SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 Rated Output (Volt) Single phase sinewave 230v AC, 50Hz Single phase sinewave 230v AC, 50Hz, Single Phase Quasi-Sin-wave 230 V AC, 50 Hz Degree of protection IP-21 IP-21, IP 20 Inverter Efficiency (%) >/= 60% >/= 60%, >/= 70% Warranty for the battery from the date of delivery 1 year 1 year, 3 Years Warranty for Line Interactive UPS 1 Year 1 Year, 2 Years, 5 Years, 3 Years Installation and No * 1/4 commissioning instructions CONSTRUCTIONAL Type of enclosure ABS * AC out put for printer (not through inverter) No Yes, No Inverter out put socket AC out put for printer (not through inverter) Not applicable 2 Three pin, 3 Three pin, Hard wiring, Not applicable FUNCTIONAL Total harmonic distorsion (%) </= 40% * Input (Volt) Single phase sinewave(160-280v) * Switching over time (Mili sec) Maximum 10 milli seconds * Overload Time (Minutes) >/= 10 minutes * Load power factor >/= 0.6 * Variation in AVR output in AC mode (%) AVR (Voltage regulation) output voltage in AC Mode 230 Volts +/-9%, 50 +/-3 Hz * Overload (%) >/=10% * Variation in output voltage in battery mode (%) (UPS output voltage in battery mode) 230 Volts +/- 10% * Variation on output frequency in battery mode (Hz) </=0.5 * PROTECTION Protection against (over discharge) discharge per 12v battery (Volt) 10.5 * Protection for outside input voltage range: If Input voltage goes outside the range 160 to 280 Volts, the system shall switch over to battery mode Yes * Protection against short circuit of UPS Yes * Protection for over voltage and over load Yes * 2/4 REPORTS AND CERTIFICATIONS Damp heat Test at 45 degree, RH -95% for 2-cycle as per IS:9000 pt-5/sec-1 Yes * Dry heat Test at 45 degree for 16 Hrs as per IS:9000 pt-3/sec-5 Yes * Cold Test as per IS:9000 pt-2/sec-4 Yes * Availability of the type test report from central Govt./NABL/ILAC Accredited Lab Yes * Type Test certificate no. and date - * Name Of Lab - * Address of Lab - * As per Meity (Government of India) guidelines UPS shall have valid BIS CRS certifications as applicable Not applicable presently * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 MALAY BHOWMIK 791110, Beside Rajiv Gandhi Stadium, P.O. Naharlagun - 791110, Dist. Papum Pare, Arunachal Pradesh. 33 15
Vehicle Hiring Service (Long Term)
pen drive or flash drive Pen Drive Or Flash Drive ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Storage capacity (GB) 32 Read speed (MB/sec) 6 - Write speed (MB/sec) 5 - Interface USB 3.0 USB 2.0, USB 3.0 OS Supported Windos 2000, XP, Vista, 7, 8 and more, Capacity : 32 GB, Read speed : 14mbps, Write speed : 4mbps, `Compact capless design, Durable metal finish, Integrated hinged cap for the metal head, Slim and portable - Auto Detection facility Yes - LED Indicator No - Color SILVER - Shape RECTANGLE - Height (mm) 30 - Width (mm) 12 - Weight (gms) 4.54 - 1/2 Body material METAL - Cover Without cap - Neck strap Without strap - Warranty (Year) 1 1, 2, 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sriram Nageswaran 600005, TNSDMA, O/o Commissionerate of Revenue Administration, Ezhilagam Annx Building, 5th Floor, Chepauk, Chennai 1 15
Vehicle Hiring Service (Long Term)
seamless steel tube assembly-TUBULARS AND OTHER WROUGHT STEEL FITTINGS, RISER PIPE Seamless Steel Tube Assembly-TUBULARS AND OTHER WROUGHT STEEL FITTINGS, RISER PIPE ( 11 ) Technical Specifications Specification Specification Name Values Allowed Values SPECIFICATION Conforming to Indian Standard IS 1239 (Part 1) latest Yes - Product ISI Marked Yes - CML number 8417881 - GENERAL Manufacturing Process of Pipe Electric Resistance Welded (ERW) Hot- finished seamless (HFS), Cold- finished seamless (CDS), Hot- finished welded (HFW), Electric Resistance Welded (ERW), High Frequency Induction Welded (HFIW) Ends of Pipes Screwed with Socket at one end and other end protected with plastic cap Screwed with Socket at one end and other end protected with plastic cap Manufacturing Process of Socket Electric Resistance Welded (ERW) Hot Finished Seamless (HFS), Hot Finished Welded (HFW), High Frequency Induction Welded (HFIW), Hand Welded, 1/4 NA MATERIAL Material of Pipe Grade-2 of IS 10748/2004, Permissible as per IS 1239(Part 1) latest Grade-2 of IS 10748/2004, Grade-2 of IS 10748/2004, Permissible as per IS 1239(Part 1) latest Category of Steel Pipes Medium Medium Steel Pipe Galvanized true true, false Socket Conform to IS 1239 (Part 2) Latest YES YES, NA Type of Socket Welded Welded, Seamless, NA Socket Galvanized true true, false DIMENSION Nominal Bore of Steel Pipe (mm) 50 - Length of Pipe (Metre) 3.0 - Thickness of Pipe in mm 3.6 3.6 Tolerance in Pipe Length (mm) Yes - WEIGHT Weight of Pipe in Kg per meter (Plain end) 5.03 5.03 Weight of Pipe in Kg per meter (Serewed and Socketed) 5.10 - MARKING Marking on the Pipe as for IS specification Yes - Year of Manufacturing Yes - Marking of Government Buyer and Name false - Test Report Availability of Test Report from NABL/ILAC accredited or Central Government Lab to prove conformity of products to the specification. Yes - Test Report No. 125 - Test Report Date 23012017 - Name of the Lab CSIDC Laboratary - Address of The Lab Industrial Area, Bhilai - Test report to be furnished to the buyer on demand Yes - 2/4 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shyam Rao Sonkusre 494334, O/o Executive Engineer, Public Health Engineering Division, Kanker 11 15
digital teaching device Experience with Gov. Required 5 Year (s) Digital Teaching Device ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Cabinet Cabinet Wall Mounted lockable enclosure Wall Mounted lockable enclosure, Floor Mounted lockable enclosure Material of the Cabinet CRCA STEEL SHEET - Degree of Protection (IP Rating) - - CPU CPU Intel Core I3 Intel Core I3, Intel Core I5, Intel Core I7, Intel Atom Processor Generation 6th 6th, 7th, 8th RAM (GB) 4 RAM upgradable upto (GB) 8 8, 16 (or higher) Hard Disk Capacity (GB) 500 500, 1000, 96 (or higher) Hard Disk Upgradable upto (GB) 1000 1000, 2000 (or higher) OS Compatibility Windows 10 Professional - 1/6 VGA Port Yes - No. of USB 2.0 Ports (Nos) 2 - No. of USB 3.0 Ports (Nos) 3 - LAN Port Yes - Keyboard Inbuilt - Mouse/Track Pad Inbuilt - Operating System Windows DoS, Linux, Windows Central Controller Central Controller Available Available, Not Available Provisions available to control various components System On/off, PC on/off, Projector on/off, volume control keys, external PC input, VGA input etc - Visualizer Visualizer Available Available, Not Available TYPE Portable Type - Technology CMOS - Capture Size/Image Size Min. A4 - Resolution (Pixels) 1920 X 1080 - Image Pick up Device (inch) 1/3 - Video Frame Rates (fps) 30 - Optical Zoom 12 - Digital magnification 10 - Focussing Arrangement Auto & Manual Both - Lens Focal Length (mm) 0 - Image Memory (Number of Images) 0 - Image Rotation Facility (Degree) 270 - Computer Interface Through USB - Light Source White LED - Life of Lamp used (Years) 3 - Number of Input VGA Port 0 - Number of Output VGA 0 - 2/6 Port Number of Output HDMI Port 0 - Scan Object BOOK, SLIDE, DOCUMEN T, IMAGE ARRAY - Video Format Supported AVI/MPEG4 - Interactive Board Interactive Board Available Available, Not Available Board Diagonal size (mm) 2104 - Width of the active area of the board (mm) 1635 - Height of the active area of the board (mm) 1145 - Display Resolution (pixels) 32767 X 32767 - Board Aspect Ratio 4 : 3 - Touch interface Touch sensitive as well as pen driven Touch sensitive, pen driven, Touch sensitive as well as pen driven, NA Touch Technology Infrared Resistive, Electromagnetic, Infrared, Ultra sonic, Capacitive, Optical, NA Number of touch points 6 - Response time (milli seconds) 1 - Operating system Compatability WINDOWS 10 - Input HDMI ports (Nos) 0 - USB 2 ports (Numbers) 0 - USB 3 ports (Numbers) 0 - Audio Input ports (Numbers) 0 - Audio output ports (Numbers) 0 - RS-232 C ports (Numbers) 0 - RJ 45 ports (Numbers) 0 - VGA-IN ports (Numbers) 0 - VGA OUT ports 0 - 3/6 (Numbers) Short Cut Keys (Available on both sides of board) Yes - In built Speakers Yes - Speaker Output (Watt) NA - Number of electronic pen or stylus to be supplied with the board (Numbers) 3 - Bluetooth connectivity NA - Wi-fi connectivity NA - Power Supply V(AC) 100-240 - Details of software provided ANNOTATION SOFTWARE SHALL INCLUDE MINIMUM FEATURE LIKE CHOOSE, PEN, ANNOTA TE, ERASE, COLOREDIT, F ONT, STAMP, MOVE, SHA PE, SIZE, TEXT - Power consumption (Watt) 0.5 POWER THROUGH USB - Standard Accessories to be supplied ie Active Board, Cordless Pen, USB Cable etc Yes - Operating Temperature Range for Complete Digital Teaching Device (degree C) 5-45 DEGREE - Operating Humidity (RH) for Complete Digital Teaching Device (%) 85 - Projector with Arm Projector with Arm Available Available, Not Available Type Short Throw - TECHNOLOGY DLP - Native Resolution VXGA 1280 X 800 - Brightness (Lumens) 4000 Contrast Ratio (Minimum) - - Zoom Feature No - Zoom ( in %age) 0 - Throw Ratio - - 4/6 Aspect Ratio 16 : 10 - Keystone Correction Manual - Projection Lamp UHP UHP, LED, Laser, LED & Laser Hybrid, NA Minimum Life of projection Lamp (In Normal Mode) (Hours) 6000 Lamp Hour Counter (In- Built) Yes - Video Compatibility - - Inbuilt Speaker Yes - Speaker Output (Watt) 10 - HDMI/DVI Port Yes - Analog RGB In Port Yes - Analog RGB Out Port Yes - Audio In Yes - Audio Out Yes - Video In Yes - Storage Media Port (USB- Type A ) No - WiFi Availabilty No - LAN Connectivity Yes - Power Consumption in Sleep Mode (Watt) - - Power Consumption in Normal Mode (Watt) 320 - Power Supply (Vac) - - Green Board Green Board Available Available, Not Available If Yes, Dimension of Green Board (Length x Width) (cm x cm) 0 - Air Mouse with Laser Pointer Air Mouse with Laser Pointer Available Available, Not Available External Frame External Frame to fix Active Board with Green Board Available Available, Not Available Dimension of External Frame (Length x Width) (cm x cm) 0 - Warranty On site OEM Warranty (Year) 3 1, 2, 3, 4, 5 (or higher) * Bold specifications are the golden parameters. 5/6 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vilas Dattatraya Kulkarni 425504, Director, Dadasaheb choudhry forest training institute, pal tah..raver, dist..Jalgaon 1 15
hopper or tipper Experience with Gov. Required 2 Year (s) Hopper Or Tipper ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, - Main Engine Capacity (cc) 702 - Make of Chassis - - Type of Chassis Frame - - Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis without facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) 1/6 Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 1 Speed, Max (Km/Hr) 60 - Max Engine Power BHP (BHP@rpm) 16 Max Engine Torque (N-M@rpm) 37.5 Main Engine Aspiration Natural Aspiration Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 30 Gradeability of Vehicle with load( %) 21 - Gradeability of Vehicle without load ( %) 21 - Ground Clearance (mm) 175 Wheel Base (mm) 2100 - Kerb Weight (Kg) 840 Gross Vehicle Weight (Kg) 1550 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - - Type of Front Axle and Suspension System - - Type of Rear Axle and Suspension System - - Type of BIS MARKED Vehicle Tyre Tube - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 4 - Type of Steering Manual Manual, Power 2/6 Operated Turning Radius, Min (mm) 8600 Speed Governers No - ABS Fitted No - Front Vehicle Brake - - Rear Vehicle Brake - - Type of Clutch - - Tipping Angle (Degree) 45 Tipper Container cap acity/Volume(cubic metres) 2.5 Certification Chassis Certification ARAI/VRDE/ICAT No. - - Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 12 - No. Of Free Service (Nos) 3 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3800 - Width of Chassis (mm) 1500 - Height of Chassis (mm) 1845 - Size Of Front Tyres (mm) - - Size Of Rear Tyres (mm) - - Size of Wheel (mm) 145 Tipper body Pivot length (mm) 1600 - Tipper body Length (mm) 2100 - Tipper Body Height (mm) 1350 - Overall Height of Tipper from Ground (mm) 1900 - Body Plate Thickness (mm) 1.6 3/6 Main Frame Thickness (mm) 2 Pneumatic System false - Hydarulic System true - Tipping Hydraulic Cylinders(Make) - - Hydraulic System Driven by Power Pack Unit - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - If Yes Auxiliary Diesel Power (HP@rpm) 0 Auxiliary Diesel Engine Transmission - - Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 1.6 Dumping Height (mm) 45 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - 4/6 If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Prashant Mineshwar Moon 442905, asifabad road nagar parishad rajura, rajura 2 15
built up trucks Average Turn Over of Last 3 Years 80 Lakh (s) Built Up Trucks ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Vehicle Engine Capacity (cc) 5760.0 - Model No U 2518 Pay Load Capacity (Tonne Load) 15.0 Type of chassis for Vehicle 2518 Tipper - Chassis with Built up Cabin true Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince BS-IV BS-IV, BS-III (Only For Defence) Colour of the Vehicle Yellow - Engine BHP@rpm (hp@rpm) 177@2400rpm Engine Torque Max@rpm (Engine Torque Max@rpm) 660NM@1200-1900rpm Top Speed (Kmph) 80.0 - Braking Distance (m) 10.0 - 1/4 Gradeability of Vehicle (%) 37 Engine Aspiration System TurboCharged Natural, Supercharged, T urboCharged, Turbochar ged Intercooled Fuel Tank Capacity (Ltrs) 212.0 - Load Body Type 14 CuM Tipper - Trailer Type nil - Ground Clearance (mm) 260.0 Floor Area (sq. mm) na - Wheel Base (mm) 3900.0 Kerb Weight (Kg) 8300.0 Gross Vehicle Weight (Kg) 25000.0 Type of Vehicle Tyre Radial Tube, Tubeless, Radial, Bi as Vehicle Transmission System Manual Automatic, Manual Drive Axle Rear - No of Axle (Nos) 3.0 - Axle Configuration ( No of Outside Tyre x No of Driving Tyre) 6x4 - Type of Front Axle and Suspension System Semi Elliptical Multileaf - Type of Rear Axle and Suspension System Semi elliptical multileaf - No. of Speed/Forward Gears 6 - Type of Steering Power Operated Manual, Power Operated Turning Radius (mm) 9000.0 - Type of Clutch Single plate dry type - Type of Front Brakes Drum - Type of Rear Brakes Drum - Certification Vehicle Certification ARAI/VRDE/ICAT No ARAI- AAKN0082 Constructional Parameters Type of Cabin Day cabin - Overall Length (mm) 6870.0 - Overall Width (mm) 2445.0 - 2/4 Overall Height (Cabin) (mm) 3200.0 - Type and Location of Shock Absorbers Semi electrical Multileaf in front and rear - No of Front Tyre (Nos) 1.0 - No of Rear Tyre (Nos) 2.0 - Size Of BIS marked Front Tyre with Ply Rating 10.00X 20-16PR Radial - Size of BIS marked Rear Tyre with Ply Rating 10.00X20- 16PR RADIAL Performance Parameters Vehicle Mileage ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Km/Ltr) 4.0 Warranty Distance (Km)unlimited during warranty period 100000.0 Warranty Time (Months) 12.0 12, 24, 36, 48 Transportation Charge in Rupees Per Km (Rs/Km) 18.0 - No of Free Service (Nos) 3.0 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Satish Kumar 211001, 1 Sarojini Naidu Marg Allahabad 5 60
Diaries-printed-plain- register- Average Turn Over of Last 3 Years 3 Lakh (s) Experience with Gov. Required 1 Year (s) Diaries-printed-plain- Register- ( 200 ) Technical Specifications Specification Specification Name Values Allowed Values Type Type of Diaries Registers ATTENDANCE REGISTER ATTENDANCE REGISTER Certification Paper Conforming to Indian Standard IS 1848:latest - Cover Board Conforming to Indian Standard IS 4664:latest - Paper Size Conforming to Indian Standard IS 1064:latest - Dimension Dimension of Paper (Length X width) (mm X mm) 148 X 210 148 X 210, 176 X 250, 216 X 279, 297 X 210, 330 X 203, 330 X 210, 370 X 250, 420 X 320 Dimension of Cover (Length X Width) (mm X mm) 160 X 215 160 X 215, 210 X 297, 310 X 220, 340 X 220, 380 X 260, 430 X 330 Grammage (GSM) Grammage of Paper (gsm) 75.0 60, 65, 70, 75, 80, 85, 90 Grammage of Cover Paper (gsm) 150.0 1/3 Colour Colour of Pages Sheets white - Colour of Cover Brown - Physical Characteristics Brightness of Paper (%) 75.0 Smoothness of Paper (Bendtsen) (ml/min) 280.0 Opacity (%) 80.0 Number of Pages Number of Pages/Sheets 50.0 Binding Type of Binding Softcover Cloth Bound Softcover Cloth Bound, Hardcover Cloth Bound Content Content and Desciption General Format As per GeM Catalogue. * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Prashant Madan Chourasiya 110091, 2nd Floor, Delhi Govt. Health Centre, 30-Extra Block, Himmatpuri (Trilok Puri), 200 15
artificial airway cpap catheter mounts or catheter mount with connector Artificial Airway Cpap Catheter Mounts Or Catheter Mount With Connector ( 100 ) Technical Specifications Specification Specification Name Values Allowed Values CONFIGURATION AND USAGE Patient Category Adult Peadiatric, Adult Usage Single Use/Disposable Single Use/Disposable, Reusable Compatible with medical breathing system and circuits Yes - Light Weight Yes - Latex Free Yes - Packing Individual Pack - Non-Toxic and Non- Irritant Material Yes - Double swivel rotates 360° on both axis true true, false Corrugated Transparent Flexible Tubing Yes - Size of Female Connector (mm) 15 Non Conductive Yes - 1/2 Sterile Yes - Size of Male Connector (mm) 22 - Length of Tubing (mm) 15 Kink Resistant Tube Yes - Provided with Connector Yes - Material of Catheter Mount Medical Grade material - Dead Space (ml) 0 CERTIFICATION Certification CE - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Desh Raj Sharma 175008, Principal, SLBS Govt. Medical College & Hospital, Mandi at Nerchowk. 100 15
Multifunction Machines