Loading
Loading…
Loading…
2,847 results • Latest
lead acid battery Lead Acid Battery ( 32 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values GENERIC Types of Lead Acid of Battery Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments, Statinary Lead-Acid Batteries (with tubular positive plates) in Monobloc Container conforming to IS:13369/1992, Stationary cells and Batteries, Lead Acid Type (With Tubular Positive Plates) conforming to IS:1651/1991, Stationary Valve Regulated Lead Acid Batteries conforming to IS:15549/2005, Lead- Acid Storage Batteries for Motor Vehicles with 1/4 Light weight and High Cranking Performance conforming to IS:14257/1995, Lead- Acid Storage Batteries for Motor Vehicles conforming to IS:7372/1995 Nominal Voltage of Battery (volts) 12.0 Volt 2.0 Volt, 6.0 Volt, 12.0 Volt Material of container Fibre Reinforced Plastics (FRP) Hard Rubber, Fibre Reinforced Plastics (FRP), Polypropylene, ABS Rated Capacity at C20 discharge (AH) 75 1-300 Warranty (Years) 2 Years 1 Year, 2 Years, 3 Years, 4 Years, 5 Years Battery Condition Charged * CONSTRUCTIONAL Dimensions (L x W x H) (mm x mm x mm) As per relevant IS Specifications * Volume of Electrolyte (ml) 5000 * Weight of Dry Battery (Kg) shall be as per relevant IS: Specn., corresponding Ah Yes. * No.of cells per Battery (No.) 6 Cells for 12 Volt battery * CERTIFICATIONS Availability of Test Reports from Central Govt./NABL/ILAC accrediated Lab showing conformity to the specifications Yes * Address of the Lab BANGLORE * Name of the Lab CPRI * Test Report No. 5797 * Test Report Date 12/12/2010 * Compulsory Registration (CRS) of BIS for safety as per IS 16046 as applicable. Secondary Cells and (Batteries containing Alkaline or other non- acid Electrolytes-Safety Requirements for YES * 2/4 Portable sealed secondary cells, and for Batteries made from them for use in portable applications * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 AMIT SHARMA 462001, Old Secretriate, Collector Office Bhopal 32 15
Human Resource Outsourcing Service
Human Resource Outsourcing Service
Camera for CCTV System Camera For CCTV System ( 73 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values CAMERA TYPE Type of Camera Housing DOME CAMERA DOME CAMERA IP Camera Yes Yes PTZ Camera No No IMAGE SENSOR Image Sensor Type CMOS CMOS Image Sensor Size 0.34 0.34 (or higher) Camera Image Sensing capacity (Picture Mode) 2MP 2MP Resolution D1 (704 x 480 Pixel), HD (1280 x 720 Pixel), Full HD (1920 x 1080 Pixel) Full HD (1920 x 1080 Pixel) Day/Night Capable true true IR illumination Range(mtr) 30 30 OPTICS Lens Type Fixed * Focal Length(mm) 3.6 - 9 3.6 - 9 1/6 Iris Control Yes * Focus Mode Auto, Zooming, Manual * VIDEO Frame Rate (fps) 25, 30 25, 30 Video Compression H.264, MJPEG, MPEG4 * Video Streaming Dual compressed stream Dual compressed stream PAN/TILT/ZOOM Panning Range NA * Pan Speed (deg/sec) NA NA Tilt Range below horizontal (deg) NA * Tilt Range above horizontal (deg) NA * Tilt Speed (deg/sec) NA NA Optical Zoom NA NA Digital Zoom 16X 16X AUDIO Audio Support false true, false Audio Compression NA * Audio Streaming NA * Number of Audio Input Channel NA * Number of Audio Output Channel NA * External Microphone Support false * ALARM Alarm Support false true, false Number of Alarm Digital Input NA * Number of Alarm Relay Output NA * Pre/Post Alarm Buffer false * SECURITY Multi Level User ID/Password Yes * IP Address Filtering true * Encrypted Data Transmission HTTPS (SSL/TSL) * PERFORMANCE Minimum Illumination for Capturing Color Image 0.1 0.1 (or lower) Electronic Shutter Speed(sec) 1/3 to 1/10000 * WDR (Wide Dynamic Range) 80 dB 80 dB 2/6 SNR (Signal to Noise Ratio) 50-60 50-60 Auto Exposure Auto Level Control, Electronic Level Control * FEATURES White Balance ( Indoor/Out door/Manual Selectable) Yes * Auto Gain Control (On/Off selectable) Yes * Back Light Compensation Yes * Remote Administration (Remote configuration and status using web based tool) Yes * Remote System Update Over Network Yes * PC Client (PC application client with a channel recording feature support) Yes * Web Client (Viewer through HTTP system configuration) Yes * On Screen Display in English Yes * ONVIF Support Yes * Presets 10 * Group Touring 1 * Privacy Zones 4 * NETWORK AND INTERFACE Supported Protocols DHCP, TCP/IP, HTTP * IP Support Static, Dynamic * Signal Processing Digital Signal Process * IPv6 ready No * Wireless false * Simultaneous Connections 5 * STORAGE On Board SD Card Support false * SD Card Memory(GB) NA * HOUSING Installation Type Indoor Indoor Material of the Housing construction Plastic Plastic 3/6 Protection IP 66 * Vandal Resistant Housing No * If Yes, IK rating NA * Mounting bracket Ceiling Mounted * Weight 180 * Dimensions (mm x mm x mm) 110X90X90 * POWER SUPPLY Power Input PoE, 12 V DC * Power Consumption 12 * Suitable Adapter Shall be Supplied to Make the Equipment Work on 230 V (+/- 10 %), 50 Hz NA * OPERATING CONDITIONS Operating Temperature Range -10 to +50 deg C * Relative Humidity Non Condensing (%) 90 * WARRANTY/SERVICES Warranty 1 1.0 (or higher) Time for Replacement of Defective Product During Warranty Period 72 72.0 (or lower) Supply of Compatible drivers and software included Yes * ENVIRONMENTAL CERTIFICATION Availability of facility & infrastructure for verification of all parameters, features, and capability with Seller No * Availability of facility to test signal to noise ratio of camera at 0-01 lux No * Conformity to Dry Heat test at 55 degree C for 16 hours as per IS :9000 latest No * Conformity to Damp heat at 40 degree C - 95% RH (cyclic test): two cycles of 16+8 hours as per IS: 9000 latest No * 4/6 Conformity to Cold test at -10/-20 degree C for 4 hours as per IS: 9000 latest, as applicable No * BIS Registration for safety general requirements as per IS 13252 (Part 1):latest Yes * Availability of Type Test Report from Central Govt NABL/ILAC accredited lab to prove conformity to specification false * Test Report Number and Date NA * Name and Address of Test Lab NA * Certification FCC * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kirtibhai Bhojani 360005, Saurashtra University Dolarrai Mankad Marg Kalavad Road 73 15
seamless steel tube assembly-TUBULARS AND OTHER WROUGHT STEEL FITTINGS, RISER PIPE Seamless Steel Tube Assembly-TUBULARS AND OTHER WROUGHT STEEL FITTINGS, RISER PIPE ( 20 ) Technical Specifications Specification Specification Name Values Allowed Values SPECIFICATION Conforming to Indian Standard IS 1239 (Part 1) latest Yes - Product ISI Marked Yes - CML number 3052135 - GENERAL Manufacturing Process of Pipe Electric Resistance Welded (ERW) Hot- finished seamless (HFS), Cold- finished seamless (CDS), Hot- finished welded (HFW), Electric Resistance Welded (ERW), High Frequency Induction Welded (HFIW) Ends of Pipes Screwed with Socket at one end and other end protected with plastic cap Plain Ends, Screwed with Socket at one end and other end protected with plastic cap, Screwed without Socket and both ends protected with plastic cap Manufacturing Process of Socket Electric Resistance Welded (ERW) Hot Finished Seamless (HFS), Hot Finished Welded (HFW), Electric 1/4 Resistance Welded (ERW), High Frequency Induction Welded (HFIW), Hand Welded, NA MATERIAL Material of Pipe Grade-2 of IS 10748/2004, Permissible as per IS 1239(Part 1) latest Grade-2 of IS 10748/2004, Grade-2 of IS 10748/2004, Permissible as per IS 1239(Part 1) latest Category of Steel Pipes Medium Light, Medium, Heavy Steel Pipe Galvanized true true, false Socket Conform to IS 1239 (Part 2) Latest YES YES, NA Type of Socket Welded Welded, Seamless, NA Socket Galvanized true true, false DIMENSION Nominal Bore of Steel Pipe (mm) 32 - Length of Pipe (Metre) 3.0 - Thickness of Pipe in mm 3.2 As per GeM Catalogue. Tolerance in Pipe Length (mm) Yes - WEIGHT Weight of Pipe in Kg per meter (Plain end) 3.10 As per GeM Catalogue. Weight of Pipe in Kg per meter (Serewed and Socketed) 3.13 - MARKING Marking on the Pipe as for IS specification Yes - Year of Manufacturing Yes - Marking of Government Buyer and Name true - Test Report Availability of Test Report from NABL/ILAC accredited or Central Government Lab to prove conformity of products to the specification. Yes - Test Report No. 17041268 - Test Report Date 29042017 - Name of the Lab CARSUL LABORATORIES - 2/4 Address of The Lab 29-30, LGF BASEMENT, SUCHITA COMPLEX, AMBEDKAR ROAD, GHAZIABAD-201001 U.P. - Test report to be furnished to the buyer on demand Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Nitin Narayan 491441, O/o Executive Engineer, Public Health Engineering E/M Division, Kamla College Road, Behind Housing Board Colony, Rajnandgaon 20 30
Plotter Printers Plotter Printers ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Type Multifunction Wideformat Printer Single function Wideformat Printer, Multifunction Wideformat Printer Printing Technology LED Electro Photographic Inkjet, LED Electro Photographic Type of Printing Mono Mono, Colour, Blue Size A0-A3 A0-A3 Printing Speed (Prints Per Minute) 4A0 As per GeM Catalogue. Printing Resolution (Dpi) 600 x 600 600 x 600, 1200 x 1200, 1600 x 1600, 2400 x 1200 Print Applications CAD/AEC - Memory (MB) 4096 256, 512, 1024, 2048, 3072, 4096, 8192 (or higher) Scan Speed @minimum 200ppi (mm/sec) 243 (B/W) 80 (Colour) - Scanning Resolution (Dpi) 600 - Hard Disk (GB) 500 Null, 40, 80, 320, 500, 1024 1/4 Interface Ethernet 10/100/1000 - USB Port Yes - Wi-Fi Connectivity Not-Available - Wi-Fi Type NA - Media Type Plain Paper, Transparencies, Translucent, Recycled Paper, Engineering Bond, Engineering Vellum, Colored Paper, Top & Green Label FSC, Red & Black Label PEFC, Recycled White Zero FSC, Polyester 3.5 And 4 Mil, Antistatic, Contrast, Clear Polyester - Media Weight Handling Range (GSM) 60-110 - Ink colour (Minimum) 4 - Roll Handling Capacity (No.) 4 - Size of Rolls to be handled ( Width X OD of roll) 36 inch - Manual cut Sheet Feed Yes - Embedded Post Script Not-Available - Preloaded Softwares like Scan to file, Print to file etc. Available - Power Consumption in Sleep Mode (Watt) 1 - Power Consumption in Print Mode (Watt) 1500 - BIS Registration under CRS of Meity Exempted - If Yes, BIS Registration number - - TTC covering all the parameters from a Central Govt Lab/an ILAC accredited Lab NABL approved Lab No - TTC number & Date - - If Yes, Name of the Lab - - If yes, address of the lab - - 2/4 On site OEM Warranty (Year) 1 1, 2, 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Nitin Diwakar Gonnade 400019, O/o.Chief General Manager_IT, 1st Floor, Estrella Battery Expansion Bldg., Plot No.1, Dharavi Road, Matunga-East, Mumbai 2 15
classroom chairs Classroom Chairs ( 60 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values GENERIC Chair Type Foldable Writing pad on One side and Arm on other side Without Arms, One Arm with fixed Writing pad on one side other side open, Fixed writing pad on one side and Arm on other side, Foldable Writing pad on One side and Arm on other side, Foldabe Writing Pad on One side with other side open Type of Seat and Backrest Made of Polythene cane * Depth of Seat in mm (+/- 10 mm) 460 * Height of Seat in mm (+/- 10 mm) 440 * Width of Seat in mm (+/- 10 mm) 480 * Overall Chair Height in mm (+/- 10 mm) 850 * 1/3 SEAT DETAILS Thickness of Cushion Used in Seat in mm (+/- 2 mm) 45 * Density of Cushion Used in Seat (Kg/Cubic Metre) 40 * Material of Fabric of Seat Cover 290 GSM cloth fabric * BACKREST DETAILS Density of Cusion Used in Backrest (Kg/Cubic Metre) 40 * Thickness of Cushion in Backrest in mm (+/- 2 mm) 45 * Material of Fabric of Backrest Cover 290 gSM Cloth Fabric * Width of Backrest (mm) 450 * Height of Backrest (mm) 430 * SUPPORT/UNDER STRUCTURE Frame Material Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum * Under Storage provided below the Seat YES * Material of under storage Book shelf under the chair made of wire mesh box. * Length of Under Storage (mm) 400 * Width of Under Storage (mm) 300 * DEPTH of Under Storage (mm) 300 * WRITING PAD DETAILS Writing Pad Material 18 mm thick prelaminated Particle Board * Writing Pad Size (Length X Width in mm) 530x300 * MISC Colour of Fabric for Seat and Backrest As per buyer's choice, As per buyer's choice * Finishing of Structure Powder coated * WARRANTY Warranty period in number of years 1 1, 2, 3, 4, 5 CERTIFICATION Test reports to be furnished to buyer on NO * 2/3 demand Product having BIFMA certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pratima Srivastav 324001, JDB govt girls college, Nayapura Kota 60 15
DSLR/COMPACT/HANDHELD CAMCORDER or VIDEO CAMERAS DSLR/COMPACT/HANDHELD CAMCORDER Or VIDEO CAMERAS ( 1 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values TYPE Classification of Camera Still Still, Video Type of Camera Compact Digital camera DSLR APS Format, DSLR Full Frame Format, Compact Digital camera, Handheld camcorders or Video Cameras IMAGE SENSOR Image Sensor CMOS CCD, CMOS Sensor Size for Fixed Lens Camera (inch) NA * Sensor Size for Interchangeable Lens Camera (mmxmm) NA 17.3 x 13.0, 22.3 x 14.9, 22.5 x 15, 23.5 x 15.6 to 15.7, 35.6 to 35.9 x 23.8 to 24, 36 x 23.9 to 24, NA Effective Pixels (Mega Pixels) 16 * ISO (Sensitivity of the image Sensor) Max 3200 800, 1600, 3200, 6400, 12800, 25600, 32000, 40000, 51200 1/5 (or higher) Supported Picture or image format JPEG, RAW * OPTICS Lens Mounting Fixed Fixed, Detachable Mount type NA * Type of Lens Zoom Lens * Minimum Focal Length 18 Any applicable numeric value Maximum Focal Length 35 Any applicable numeric value Minimum Lens Aperture (f/number) 3.5 Any applicable numeric value Maximum Lens Aperture (f/number) 6.5 Any applicable numeric value Optical Zoom 16X to 20X * Digital Zoom (X) 16 * Maximum Field of View 110 * Focus Mode Manual * Video Recording Video Recoding false true, false Maximum Recording Resolution (Pixels) NA 4K (3840 x 2160), Full HD (1920 x 1080), HD (1280 x 720), SD (640 x 480), NA Frame Rate NA * Video Compression Format NA * Live Video Streaming false true, false Video Output Port NA * Video file format NA * AUDIO Audio Recording false true, false Audio Recording Type NA * Number of Audio Input Port NA * Type of Audio input Port NA * Audio Output No Yes, No Number of Audio Output Port NA * Type of Audio output Port NA * DISPLAY Display true true, false 2/5 Display Type LCD * Touch Screen No Yes, No Display Size (inch) 2.1 - 2.5 1-1.5, 1.6-2, 2.1 - 2.5, 2.6 - 3, 3.1 - 3.5, 3.6 and above, NA Vari Angle Screen No Yes, No View Finder No Yes, No FEATURES Flash Built-in, External (Not inclusive in the scope of supply), NA Built-in, NA GPS coordinates Stamping onto Videos photographs No * Gyro Sensor No * Voice Control No * Connectivity Interface NA * Control NA * Supported Operating Systems for App NA * Picture control system Auto, standard, portrait, l andscape * Noise reduction Feature No * Flash modes Auto, Flash Off, NA * Shutter type mechanical * Minimum Shutter Speed 25 * Maximum Shutter Speed 0.01 * Drive modes NA * STORAGE Storage Type SD * Dual Slot No * SD Card Memory inclusive in the scope of supply (GB) 16 * Memory Card expandable upto (GB) NA * In-built Memory(GB) 0 * BATTERY Power Source Rechargeable Battery * Battery Size, if Non Rechargeable Battery NA * Battery Chemistry, if Rechargeable Battery NA * 3/5 Number of Batteries required for operation 4 * Number of Batteries supplied (Inclusive in the Scope of Supply) 0 * BATTERY CAPACITY (mAh) 1800 * Battery Charger for Rechargeable Batteries Yes * OPERATING CONDITIONS Minimum Operating Temperature (for land use) 0 0, 5, 10, 15, 20, 30, 40 Maximum Operating Temperature (for land use) 40 40, 50, 55, 60, 70 Operating Humidity, Rh at 40 deg C 65 65, 70, 75, 80, 85, 90, 95 GENERIC Housing construction Composite polycarbonate outer shell with metallic internal chassis Metallic, Polycarbonate, Composite polycarbonate outer shell with metallic internal chassis IP Protection NA IP 21, IP 22, IP 23, IP 52, IP 53, IP 54, IP 55, IP 66, IP 67, NA Carry Case inclusive Yes Yes, No Weight 542 * Dimension (WxHxD) (mmxmmxmm) 113.5, x 78.3, x 94.9mm * List of Items and Quantity of each item included in the offer camera strap, bag, SD card * WARRANTY Warranty 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sudhir Kumar Sharma 335001, DCF SHRIGANGANAGAR OFFICE, 5A MOJPURA, PADAMPUR ROAD, SHRI GANGANAGAR 1 15
hopper or tipper Experience with Gov. Required 3 Year (s) Hopper Or Tipper ( 2 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, * Main Engine Capacity (cc) 798 * Make of Chassis - * Type of Chassis Frame - * Category of Vehicle for which Chassis to be used Medium Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl * Type of Fuel Diesel Diesel, CNG 1/5 Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 5 5 Speed, Max (Km/Hr) 90 * Main Engine Aspiration Natural Aspiration Natural Aspiration, Turbocharged, Supercharged, Turbocharged+ Supercharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Any applicable numeric value Fuel Tank Capacity (Ltrs) 30 Any applicable numeric value Gradeability of Vehicle with load( %) 30 * Gradeability of Vehicle without load ( %) 18 * Ground Clearance (mm) 160 Any applicable numeric value Wheel Base (mm) 2100 * Kerb Weight (Kg) 920 Any applicable numeric value Gross Vehicle Weight (Kg) 1770 Any applicable numeric value No of Axle (Nos) 2 * Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - * Type of Front Axle and Suspension System - * Type of Rear Axle and Suspension System - * Type of BIS MARKED Vehicle Tyre Radial * Chassis Transmission System Automatic Automatic, Manual Number of Speed Forward Gears 4 * Type of Steering Power Operated Manual, Power 2/5 Operated Turning Radius, Min (mm) 4300 Any applicable numeric value Speed Governers yes * ABS Fitted yes * Front Vehicle Brake - * Rear Vehicle Brake - * Type of Clutch - * Tipping Angle (Degree) 60 45-9999999 Tipper Container cap acity/Volume(cubic metres) 2.5 0.5-10.5 Certification Chassis Certification ARAI/VRDE/ICAT No. - * Performance Parameters Standard Sparewheel and Tool Kit Yes * Warranty Time (Month) 12 * No. Of Free Service (Nos) 3 * Battery Warranty (Months) 12 * Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3800 * Width of Chassis (mm) 1500 * Height of Chassis (mm) 1845 * Size Of Front Tyres (mm) - * Size Of Rear Tyres (mm) - * Size of Wheel (mm) 304.8 Any applicable numeric value Tipper body Pivot length (mm) 1546 * Tipper body Length (mm) 2165 * Tipper Body Height (mm) 670 * Overall Height of Tipper from Ground (mm) 1489 * Body Plate Thickness 2 1.5-9999999 3/5 (mm) Main Frame Thickness (mm) 5 Any applicable numeric value Pneumatic System true * Hydarulic System true * Tipping Hydraulic Cylinders(Make) - * Hydraulic System Driven by Main Engine * Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation true * Auxiliary Diesel Engine Transmission - * Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 30 Any applicable numeric value No. of Cylinders in Auxiliary Diesel Engine 2 * Tipper Container Material Mild Steel Mild Steel, Stainless Steel, Aluminium, Chromium Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Any applicable numeric value Dumping Height (mm) 1400 Any applicable numeric value Engine Oil Pressure Level Indicator in Control Panel true * Fuel Gauge Indicator in Control Panel true * Engine Cooling Liquid Temperature Indicator in Control Panel true * Operating Hour Meter true * Locking/Unlocking of Tipper Discharge Container Yes * Lowering/Lifting of Tipper Discharge Container Yes * Counter Weight true * If yes Counter Weight (kg) 0 * 4/5 Paint Automotive Paint * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kailash Babu 464111, nagar parishad lateri distt-vidisha (mp) 2 30
Multimedia Projectors Average Turn Over of Last 3 Years 5 Lakh (s) Experience with Gov. Required 3 Year (s) Multimedia Projectors ( 1 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Specifications Technology DLP LCD, DLP, Lcos, SXRD, Three Clip DLP Projection Method Front * Native Resolution 1920 x 1200 (WUXGA) * Brightness (Lumens) 5000 * (or higher) Contrast Ratio (Minimum) (pixels) 3000:1 * Zoom Feature Yes * If Yes, Zoom (%) 1.6 * Availability of Lens Yes * If Yes, Type of Lens Short Throw * Aspect Ratio 16:10 * Keystone Correction Automatic & Manual Both * 1/4 Projection Lamp UHP UHP, LED, Laser, LED & Laser Hybrid, UHE Minimum Life of projection Lamp (In Normal Mode) (Hours) 2, 000 * Lamp Hour Counter (In- Built) Yes * Video Compatibility PAL * Inbuilt Speaker Yes * HDMI/DVI Port Yes * Analog RGB In Port (Hours) Yes * Analog RGB Out Port Yes * Audio In Yes * Audio Out Yes * Video In Yes * Storage Media Port (USB- Type A ) No * WiFi Availability No * Wireless Screen Share No * LAN Connectivity Yes * 3D Ready Yes * Power Consumption in Sleep Mode (Watts) 0.5 * Power Consumption in Normal Mode (Watt) 6 * Noise Level in Sleep Mode (dB) 33 * Noise Level in Normal Mode (dB) 36 * Power Supply 210V-240V, 50 Hz * Operating Temperature Range (Degree C) 0-40 * Operating Humidity (RH %) 30% * Dimensions (mm x mm x mm) 411.4 x 118.4 x 267.5 * Weight (Kg) 4.9 * BIS Registration under CRS of Meity Yes * BIS Registration Number - * 2/4 Battery No * If Yes, Battery Capacity NA * If Yes, Battery Backup Time (Hour) 0 * ON Site OEM Warranty 1 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Jashwant Kumar Suryavanshi 465441, GOVT. POLYTECHNIC COLLEGE CAMPUS, MODEL HIGHER SECONDARY SCHOOL, NARWAL ROAD, AGAR, MALWA (NEW DISTRICT) 1 15
Potable water purification system Average Turn Over of Last 3 Years 60 Lakh (s) Experience with Gov. Required 2 Year (s) Potable Water Purification System ( 26 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values EQUIPMENT TYPE & FEATURES Type Electrically Operated Reverse Osmosis based water purifier Electrically Operated Reverse Osmosis based water purifier Ultraviolet (UV) LAMP Yes Yes Ultra Voilet (UV) Lamp power consumption 24 * STANDARDS Conformity to Indian Standrad for System IS 14724 (latest) for water purification system with Ultraviolet disinfection * Number of float valves/sensors 2 1-5 INPUT PARAMETERS Input Water TDS 1000 1000 OUTPUT PARAMETERS Recovery at 27 degree Centigrade 90-100 90-100, 70-80 Output Water of RO IS 10500(latest) * 1/3 system Conforming to Indian Standard Output water capacity (Litre/Hour): 250 250, 100, 50 Arsenic and Floride removal capability false true, false Misc, warranty etc Thin-film composite membrane No Yes, No, NA High Pressure Pump No * Raw water/Chemical Raw water/Chemical Cleaning PUMP No Yes, No Pre Filter Vessels: Yes Yes, No Micron Filter No Yes, No Membrane Housing No Yes, NA Auto cut Yes Yes No of candles (Nos) 4 1-5 Installation Type Floor mounted Floor mounted Warranty period ( for free replacement of machine 1 1.0 (or higher) Warranty Period (for scope including free of cost candle and activated carbon onsite replacement twice a year) 1 1.0 (or higher) Antiscalant- where silica is up to 100 ppm/where Mica is up to 100 ppm No Yes, NA Chloride & Flouride removal facility No Yes with Pump, Yes without pump, No Test Report Availability of type test report(Design Evalution Reports) as per IS:14724 and IS 10500 - * Test certificate No and date: - * Name and Address of laboratory which conducted Test: - * * Bold specifications are the golden parameters. Consignees and Quantity 2/3 S.No. Consignee Address Quantity Delivery Days 1 Chandrashekhar Jaiswal 462016, vallabh bhavan mantralaya 26 15
overbed tables-Patients Overbed Tables-Patients ( 17 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Dimensions Overall Height(If fixed height table)/Minimum Height(If variable height table) >= 900 mm to 1000 mm >= 900 mm to 1000 mm, >1000 mm to 1100 mm, > 1100 mm to 1200 mm Overall Length >=600 mm to 650 mm, > 650 mm to 700 mm, >700 mm to 750 mm, >750 mm to 800 mm, >800 mm to 850 mm, >850 mm to 900 mm, >900 mm to 950 mm, >950 mm to 1000 mm, >1000 mm to 1050 mm >=600 mm to 650 mm, >1000 mm to 1050 mm Overall Width >350 mm to 400 mm 300 mm to 350 mm, >350 mm to 400 mm, >400 mm to 450 mm, >450 mm to 500 mm, >500 mm to 550 mm, >550 mm to 600 mm Permissible Height Adjustment over the Minimum height 100 0, 100, 200, 300, 400 (or higher) 1/3 Height of the table top adjustable: true true, false Cross section of Frame material Square Square, Rectangle, Round Frame n Design Design of Over bed Table Ability to position bed table top over patient from side of bed Ability to position bed table top over patient from side of bed, Ability to position bed table top over patient from Head/Foot side of bed Provision for changing slope of table top from its horizontal position false true, false Material Of Frame Mild Steel Mild Steel, Stainless Steel (or higher) Cross Section Of Frame Material - * Safe Working Load (maximum) 15 Kg or more. * DIa/size of pipe used in frame - * Thickness Of Pipe Of Frame - * Table Top Material Of Top Pre laminated wooden Top Pre laminated wooden Top, Mild Steel, Stainless Steel Length Of table top 600 600-900 Width Of table top 350 325-600 Thickness Of table top - * Certifications Availability Of Type Test Reports(TTRs)[to be submitted by seller to buyer on demand) of The Product From Central Govt/NABL/ILAC Accredited Lab Showing Compliance To The Specification true true, false Miscellaneous Number Of Supports In The Frame - * Provision of Castor wheel support Yes * Dia Of Castor wheels 50 * 2/3 Painting of bedside table surface: Powder Coating * Paint Color White * Finish of Surface GLOSSY * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kul Bhushan 160031, Government Medical College & Hospital Sector 32, Chandigarh, 160031 17 45
revolving chair Average Turn Over of Last 3 Years 2 Lakh (s) Experience with Gov. Required 2 Year (s) Revolving Chair ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type push back As per GeM Catalogue. Tilt Tension Adjustment false - Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm Without With, Without Type of backrest support backrest with lumber support of polypropylene at multilevel across back backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest BLUE, RED, black, brown, maroon - Ergonomic Seat Design false true, false Yes is better Back type push back push back, height adjustable 1/5 backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved false - Locking mechanism false - Type of locking N.A - Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support N.A integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm 2/5 Diameter, Chrome finish with 5 wheels Arm Material steel covered with polyurethane steel covered with polyurethane seat material pressed and moulded plywood with polypropylene cover pressed and moulded plywood with polypropylene cover Density of PU foam used in seat KG per Cu Meter (+/- 3) 40 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 40 - Material of Fabric Back Cover leatherite, mesh fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover Mesh Fabrics, leatherite foam laminated mesh fabrics, Mesh Fabrics, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 220 gram - DIMENSION Overall Chair Height ±15mm 990 As per GeM Catalogue. Backrest Height ±15mm 550.0 As per GeM Catalogue. Backrest Width ±10mm 440.0 As per GeM Catalogue. Seat Height ±15 mm 450 420, 450, 480, 500, 520 Seat Width ±10 mm 440 440, 520, 550, 460, 360 Seat Depth ±10 mm 460.0 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 1.0 As per GeM Catalogue. Thickness of Plywood used in 12 mm 12 mm, 15 mm, 18 mm, N.A 3/5 Seat ±1(mm) Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 50 mm As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 50 mm As per GeM Catalogue. WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification NO YES, NO OEM of offered product is ISO 9001:2015 certified NO YES, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified NO YES, NO Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajendra Prasad Mali 305404, GOVERNMENT COLLEGE, KEKRI, AJMER ROAD, KEKRI (AJMER) 5 15
Class Room Desking and Seating Class Room Desking And Seating ( 150 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values GENERIC TYPE OF DESKING INTEGRATED DESK CUM SEATING WITH SHELF/STORAGE UNDER DESK ONLY TABLE/DESK, ONLY SEATING, INTEGRATED DESK CUM SEATING, INTEGRATED DESK CUM SEATING WITH SHELF/STORAGE UNDER DESK, ONLY TABLE/DESK WITH SHELF/STORAGE UNDER DESK Desking Configuration TWO SEATER SINGLE SEATER, TWO SEATER, THREE SEATER, FOUR SEATER Length of Desking, Seating and Backrest (if provided) in mm (±10 mm) 750 * DESK/BENCH SPECIFICATIONS Material of Desk Top +/- 2 mm (For shelf storage +/- 4 mm) 18 mm thick prelaminated Particle Board * Material of Support Mild Steel square * 1/3 Structure or Side Pannel Section of size 25x25 mm and wall thickness minimum 1.6 mm Height of Desk Top in mm (±5 mm) 750 * Width of Desk Top in mm (± 5 mm) 450 * SEATING SPECIFICATION Material of Seat and Backrest (if provided) (+/- 2 mm (For back rest +/- 4 mm) 18 mm thick prelaminated Particle Board * Material of Support Structure Mild Steel square Section of size 25x25 mm and wall thickness minimum 1.6 mm * Material of Seat Cushion WITHOUT CUSHION 40 mm thick PU foam of density 40 gram per cubic cm, WITHOUT CUSHION, ONLY DESK NO SEATING Width of Seating in mm (±10 mm) 400 * Height of Seat in mm (±10 mm) 500 * Width of backrest if provided in mm (± 5 mm) 200 * Back Support for Seating of Same materail as Seating Provided without cushion Provided with Cushion, Provided without cushion, back support not provided MISC DESIGN AS PER DGS&D drawing No DQA/GE/RC -208/Schedule 19 (DRG 1, 2, 3, 4, 5, 6, 7, 8, 9, 10) NO * Colour of finish As per buyer's choice * Desk top finishing Two long sides shall have post form half round profile and other two sides edge banded with 2 mm thick PVC tape with the help of hot melt glue * Distance between Tabletop edge and Seat edge in mm (+/- 5 mm) NA * WARRANTY Warranty period in number of years 1 1, 5 * Bold specifications are the golden parameters. 2/3 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Jagdish Prasad 304804, GOVERNMENT P.G COLLEGE NH-12, CISF ROAD, DEOLI 150 15
Potable water purification system Potable Water Purification System ( 5 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values EQUIPMENT TYPE & FEATURES Type Electrically Operated Reverse Osmosis based water purifier Electrically Operated Reverse Osmosis based water purifier, Gravity operated water purifier, Water Purifier electro- deionization Based Ultraviolet (UV) LAMP Yes Yes, No Ultra Voilet (UV) Lamp power consumption 11 * STANDARDS Conformity to Indian Standrad for System IS 14724 (latest) for water purification system with Ultraviolet disinfection * Number of float valves/sensors 1 1-5 INPUT PARAMETERS Input Water TDS 1000 1000, 2000, 3000, 4000, 5000 OUTPUT PARAMETERS Recovery at 27 degree Centigrade 25-35 25-35, 30-40, 90-100, 70-80, 50-60 Output Water of RO system Conforming to IS 10500(latest) * 1/3 Indian Standard Output water capacity (Litre/Hour): 10 10, 25, 50, 100, 250, 500, 750 Arsenic and Floride removal capability false true, false Misc, warranty etc Thin-film composite membrane Yes Yes, No, NA High Pressure Pump Yes * Raw water/Chemical Raw water/Chemical Cleaning PUMP No Yes, No Pre Filter Vessels: Yes Yes, No Micron Filter Yes Yes, No Membrane Housing Yes Yes, NA Auto cut Yes Yes, No No of candles (Nos) 4 1-5 Installation Type Wall mounted Table top, Wall mounted, Floor mounted, Floor mounted & enclosed Warranty period ( for free replacement of machine 3 2, 3, 1 (or higher) Warranty Period (for scope including free of cost candle and activated carbon onsite replacement twice a year) 3 2, 1 (or higher) Antiscalant- where silica is up to 100 ppm/where Mica is up to 100 ppm No Yes, NA Chloride & Flouride removal facility Yes with Pump Yes with Pump, Yes without pump, No Test Report Availability of type test report(Design Evalution Reports) as per IS:14724 and IS 10500 - * Test certificate No and date: - * Name and Address of laboratory which conducted Test: - * * Bold specifications are the golden parameters. Consignees and Quantity 2/3 S.No. Consignee Address Quantity Delivery Days 1 Anand Parkash 131001, Govt. Polytechnic Rathdhana Road 5 15
waste containers or rigid liners- Dust bin or Garbage Bin or Household Bin Waste Containers Or Rigid Liners- Dust Bin Or Garbage Bin Or Household Bin ( 10 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values GENERIC Utility Public (Mobile containers confirming IS: 12402) Domestic, Public (Mobile containers confirming IS: 12402) ISI Marked No yes, No CM/L No (If ISI Marked Yes) (If No write NA) NA * Class confirming to IS:12402 (For Public Dustbins) NA * Material Corrosion free sheet metal HDPE, LDPE, LLDPE, Corrosion free sheet metal, Stainless steel, Stainless Steel (with inner Plastic lining bin) CAPACITY Bin Capacity (Volume) (Ltrs) 4500 Litres * DIMENSIONS Wheel Dimension in (mm) (Diameter x NA * 1/3 Thickness ) (mm x mm) Weight of Dustbin (Complete unit) (Grams) 450000 * CONSTRUCTIONAL Colour green * Wheel Lock Without * Load carrying Capacity (Kgs) 3500 * Wall Non- Perforated * Lid hindged * Handle With * Wheel Without * Wheel Material NA * Towage Provision yes * Gripping Provision Both Frontal &Ventral * Plugged outlet for washing & draining Without * UV Resistant no * Dust Bin stand without * No. of Compartments in the Bin single * CERTIFICATIONS Availability of Test Reports from Central Government/NABL/IL AC acredited Lab to prove conformity to the specifications yes * Test report number SAIL/418144 * Test report date 20/05/2017 * Name and address of lab Steel Authority Of India Ltd., Bokaro Steel Plant, Jharkhand * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Hari Ram Thakur 171001, O/O Municipal Corporation Shimla, DC Office COMPLEX, SHIMLA 10 15
Human Resource Outsourcing Service
Steel Clothes Lockers Steel Clothes Lockers ( 2 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS:3314 latest Not As per IS * Number of compartments (Nos) 4 6, 8, 12, 18, 20, 24, 4, 10 Locks Internal locking * Name Tag Holders true * MATERIAL & WEIGHT Material M.S sheet conforming to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1 * Sheet Thickness of body, back shelves and pedestal (mm)(+/- 5%) 0.8 * Sheet Thickness of door (mm)(+/- 5%) 0.9 * (or higher) Handle Electroplated Mild steel handle * DIMENSION Height of dressers Without pedestal in 1855 * 1/3 mm (±5 mm) Width of dressers in mm (±5 mm) 910 * Depth of dressers in mm (±5 mm) 480 * Stiffened Pedestal height in mm (±5 mm) 150 * CLOUR, FINISH & PACKING Packing Five ply corrugated board and strapped with 12 mm HDPE straps. * Paint Stove enameled Stove enameled, Powder coated Colour Olive green, Brown, Faw n, Drab, Ash Gray, Steel Gray, Dark Gray, Dark Brown, Off White, Blue, Black * WARRANTY Warrantee period in number of years 1 1, 2, 3, 5 (or higher) CERTIFICATION ISI marked false * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Jagdish Prasad 304804, GOVERNMENT P.G COLLEGE NH-12, CISF ROAD, DEOLI 2 15
media control systems or wireless presentation system Media Control Systems Or Wireless Presentation System ( 1 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Specification Supported Operating Systems (PC) CCU * Supported Operating System (Mobile) 9.8 * Type of Video Outputs HEAD PHONE * Type of Audio Outputs DIGITAKL * Output Resolution (Pixel x Pixel) D X D Any applicable text(s) Frame Rate (fps) 3 Any applicable numeric value Maximum Number of Simultaneous sources on Screen 20 * Maximum Number of Simultaneous Connections with the system 21 * Wireless Standards 802.11 a/b/g/n * Wireless Frequency 2.4 * 1/3 (GHz) Data Transfer Rate (Mbps) 3 Any applicable numeric value Wireless Range (Maximum) (meters) 240 10-999 Wireless Security features 64/128 * Number of VGA Port 0 * Number of HDMI Port 0 * Number of USB Port 0 * RJ-45 Port Yes * Reset button Available * Audio Jack Socket Yes * Medium of data transmission (From Computer/Laptop to system) YES * Essential accessories to be supplied CABLE * Operating Temperature Range (Degree C) 45 DEGREE * Operating Humidity (% RH) NORMAL * Power Requirements 120 * Power Consumption in Operating mode (Watt) 155 * Power Consumption in Standby mode (Watt) 0.05 * Certifications Available YES * Dimensions (H x W x D) (mm x mm x mm) 494MMX110X165MM * Weight (Gms) 4 * On Site OEM Warranty (Years) 1 1, 2, 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Jagdish Prasad 304804, GOVERNMENT P.G COLLEGE NH-12, CISF ROAD, DEOLI 1 15 2/3
hopper or tipper Average Turn Over of Last 3 Years 140 Lakh (s) Hopper Or Tipper ( 6 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Box body Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, - Main Engine Capacity (cc) 1034 - Make of Chassis - - Type of Chassis Frame - - Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) Fuel Consumption ( declared by OEM as 20 1/6 certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) Speed, Max (Km/Hr) 70 - Main Engine Aspiration Natural Aspiration Natural Aspiration, Turbocharged, Supercharged, Turbocharged+ Supercharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 27 Gradeability of Vehicle with load( %) 10.2 - Gradeability of Vehicle without load ( %) 10.3 - Ground Clearance (mm) 185 Wheel Base (mm) 1970 - Kerb Weight (Kg) 924 Gross Vehicle Weight (Kg) 1924 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - - Type of Front Axle and Suspension System - - Type of Rear Axle and Suspension System - - Type of BIS MARKED Vehicle Tyre Radial - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 5 - Type of Steering Manual Manual, Power Operated Turning Radius, Min (mm) 7700 Speed Governers yes - 2/6 ABS Fitted No - Front Vehicle Brake - - Rear Vehicle Brake - - Type of Clutch - - Tipping Angle (Degree) 45 Tipper Container cap acity/Volume(cubic metres) 1.7 Certification Chassis Certification ARAI/VRDE/ICAT No. - - Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 12 - No. Of Free Service (Nos) 5 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3675 - Width of Chassis (mm) 1460 - Height of Chassis (mm) 1460 - Size Of Front Tyres (mm) - - Size Of Rear Tyres (mm) - - Size of Wheel (mm) 4.82 Tipper body Pivot length (mm) 1650 - Tipper body Length (mm) 2450 - Tipper Body Height (mm) 710 - Overall Height of Tipper from Ground (mm) 1500 - Body Plate Thickness (mm) 2 Main Frame Thickness (mm) 3 Pneumatic System false - Hydarulic System true - 3/6 Tipping Hydraulic Cylinders(Make) - - Hydraulic System Driven by Power Pack Unit - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - Auxiliary Diesel Engine Transmission - - Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Steel, Aluminium, Chromium Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Dumping Height (mm) 590 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 4/6 1 Mangesh Sureshrao Chandekar 445302, Main Road Pandharkawada 6 15
revolving chair Average Turn Over of Last 3 Years 2 Lakh (s) Experience with Gov. Required 2 Year (s) Revolving Chair ( 6 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt synchronic central tilt synchronic Tilt Tension Adjustment true - Height Adjustment ± 5(mm) up to 90 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With Type of backrest support backrest with lumber support of polypropylene at multilevel across back backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black - Ergonomic Seat Design true true, false Yes is better Back type fixed push back, height adjustable 1/5 Backrest is made of two pcs injection moulded frame Backrest is made of one piece injection moulded frame - backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved true - Locking mechanism true - Type of locking tilt limitor - Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support external & fixed integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden 2/5 Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material Proypylene steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam Covered With pure leatherite pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 50 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 50 - Material of Fabric Back Cover Leatherite mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover leatherite leatherite GSM/Thickness of fabric ±5%(Gram/Square meter) 290 gram - DIMENSION Overall Chair Height ±15mm 1025 As per GeM Catalogue. 3/5 Backrest Height ±15mm 600 As per GeM Catalogue. Backrest Width ±10mm 480 As per GeM Catalogue. Seat Height ±15 mm 450 420, 450, 480, 500, 520 Seat Width ±10 mm 480 440, 520, 550, 460, 360 Seat Depth ±10 mm 460 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 0.8 As per GeM Catalogue. Thickness of Plywood used in Seat ±1(mm) 18 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 18 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 580 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 50 mm As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 50 mm As per GeM Catalogue. WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO Green guard YES YES, NO 4/5 certification Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajendra Prasad Mali 305404, GOVERNMENT COLLEGE, KEKRI, AJMER ROAD, KEKRI (AJMER) 6 15
Leg Press - Outdoor Gym Equipments Leg Press - Outdoor Gym Equipments ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values TYPE Type Leg Press Double Leg Press Double SIZE Length 1700 - Width 700 - Height 1900 - CAPACITY Maximum User Weight ( Kg ) 120 120.0 MATERIAL Governing Specification for GI Pipes BIS specification No IS 1239 ( Part 1 )- 2004, latest BIS specification No IS 1239 ( Part 1 )- 2004, latest, BIS specification No IS 1161:2014, latest All the GI Pipes are ISI marked true true Main Central Pipe 125 mm Nominal Bore G.I. Pipe 80mm Nominal Bore G.I. Pipe, 100mm Nominal Bore G.I. Pipe, 125 mm Nominal Bore G.I. Pipe, 150mm Nominal Bore G.I. Pipe Main Central Pipe, Class as per IS 1239 Heavy Medium, Heavy, Not applicable for pipe as per IS 1161 Designation of Main Central Pipe ( as per IS 1161 ) NA - 1/5 Moving Frame Pipe 40mm Nominal bore G.I. pipe 32mm Nominal bore G.I. pipe, 40mm Nominal bore G.I. pipe Moving Frame Pipe, Not applicable for pipe as per IS 1161 Designation of Moving Frame Pipe ( as per IS 1161 ) NA - Foot Rest Frame Foot Rest Hinging Pipe 32mm Nominal Bore G.I. Pipe 25mm Nominal Bore G.I. Pipe, 32mm Nominal Bore G.I. Pipe Foot Rest Frame Pipe, Not applicable for M.S. Plates Designation of Foot Rest Frame Pipe ( as per IS 1161 ) NA - Connecting Links 40mm Nominal Bore G.I. Pipe 25mm Nominal Bore G.I. Pipe, 32mm Nominal Bore G.I. Pipe, 40mm Nominal Bore G.I. Pipe, 10mm thick MS plates, 12mm thick MS plates Connecting Links Pipe, Not applicable for M.S. Plates and Pipes as per IS 1161 Designation of connecting link Pipe ( as per IS 1161 ) NA - MS Foundation Plate Thickness 12 12.0 Foundation Pipes with anchoring 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm, 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm Nominal Bore of Foundation Pipe 125mm 80mm, 100mm, 125mm, 150mm Foundation Pipe, Not applicable for pipe as per IS 1161 Designation of Foundation Pipe ( as per IS 1161 ) NA - Galvanization of all Pipes Zinc coating on the tubes shall be in - 2/5 accordance with IS 4736 latest. Nuts and Bolts for Assembly G.I. - Movement must be supplied with bearings Yes - Bearings Tapered Roller Bearing Ball Bearing, Tapered Roller Bearing Bearings shall be self lubricating and sealed for protection against Rain and dust etc Yes - Seat and Back Rest 6mm thick, Fibre Reinforced plastic with uniform bending radius to avoid sharp edges 2mm Thick G.I. Seat with uniform bending radius to avoid sharp edges, 3mm thick, HDPE with uniform bending radius to avoid sharp edges, 6mm thick, Fibre Reinforced plastic with uniform bending radius to avoid sharp edges, 2.5mm thick, M.S. Perforated with uniform bending radius to avoid sharp edges, LLDPE with uniform bending radius to avoid sharp edges Foot Rest Fibre Reinforced Plastic - Closing Caps of open ends of the pipes, bearings, bushes and base G I Caps - Thickness of closing caps ( min ) 3 - All Plastic Components U V stabilised, weather resistance - COLOUR Colour As per buyer's requirements - Paint/Finish Powder Coated, UV resistant - Paint Coating Thickness ( min ) 100 - OTHER REQUIREMENTS Ergonomic Design Yes - Foot rest shall be antislip/antiskid Yes - Moving Scope should Yes - 3/5 be Limited There shall be no crushing or searing points for user between moving and/or stationary parts of equipment during use Yes - Equipment shall be free from entrapments and sharp edges Yes - Installation Instructions must be provided Yes - Installation Included Included, Not Included Safety and quality Requirements European Standard EN 16630: 2015 latest - Instruction Plate Stainless Steel, Size 150 X 230 X 0.7mm, with indelible printing - CERTIFICATION Certfication ( Safety and Quality Requirements ) No As per European Standard EN 16630, No Registration No and Validity of Registration 17DQCE26 ISO 9001:2015 VALID TILL 18/12/2019 - APPROVAL Drawing depicting detailed dimensions and foundation details shall be got approved from buyer before installation, if desired by buyer Yes - WARRANTY Warranty ( years ) 2 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Narendra Kumar Rai 313332, Deogarh Road Amet 2 15
Wheeled Skid Steer Loader
Shoulder Builder/Arm Wheel- Outdoor Gym Equipment Shoulder Builder/Arm Wheel- Outdoor Gym Equipment ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values TYPE Type Three Wheel Three Wheel DIMENSIONS Height of Main Central Pole from ground 1500 - Outside Diameter of first wheel 750 - Outside Diameter of second wheel 750 - Outside Diameter of third wheel 750 - Height of first wheel from ground 1400 - Height of second wheel from ground 1200 - Height of third wheel from ground 1200 - MATERIAL Governing Specification for GI Pipes BIS specification No IS 1239 ( Part 1 )- 2004, latest BIS specification No IS 1239 ( Part 1 )- 2004, latest, BIS specification No IS 1161:2014, latest All the GI Pipes are ISI marked true true Main Central Pipe construction 100mm Nominal Bore G.I. Pipe 80mm Nominal Bore G.I. Pipe, 100mm 1/5 Nominal Bore G.I. Pipe, 125 mm Nominal Bore G.I. Pipe, 150mm Nominal Bore G.I. Pipe Main Central Pipe, Class as per IS 1239 Heavy Medium, Heavy, Not applicable for pipe as per IS 1161 Designation of Main Central Pipe ( as per IS 1161 ) BIS SPECIFICATION NO IS 1239(PART-1)-2004, L ATEST - Ring ( Wheel ) 32mm Nominal Bore G.I. Pipe 25mm Nominal Bore G.I. Pipe, 32mm Nominal Bore G.I. Pipe, 40mm Nominal Bore G.I. Pipe Ring ( Wheel ) Pipe, Not applicable for pipe as per IS 1161 Designation of Ring ( Wheel ) Pipe ( as per IS 1161 ) NA - Pipe of Spokes of Wheel 20mm Nominal bore G.I. pipe 15mm Nominal bore G.I. pipe, 20mm Nominal bore G.I. pipe Pipe of Spoke of Wheel, Not applicable for pipe as per IS 1161 Designation of Pipe of Spoke of Wheel ( as per IS 1161 ) NA - Number of Spokes in Wheel 4 - Connector Pipe ( between Main Central Pipe and Wheel ) 32 mm Nominal bore G.I. pipe 32 mm Nominal bore G.I. pipe, 40 mm Nominal bore G.I. pipe, 50 mm Nominal bore G.I. pipe Connector Pipe, Not applicable for pipe as per IS 1161 Designation of connecting pipe ( as per IS 1161 ) NA - MS Foundation Plate Thickness 12 12.0 Foundation Pipes with anchoring 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm, 500mm deep GI Pipe, supported with M.S. 2/5 Angle 25 X 25 X 4mm Nominal Bore of Foundation Pipe 80mm 80mm, 100mm, 125mm, 150mm Foundation Pipe, Class as per IS 1239 Medium Medium, Not applicable for pipe as per IS 1161 Designation of Foundation Pipe ( as per IS 1161 ) NA - Galvanization of all Pipes Zinc coating on the tubes shall be in accordance with IS 4736 latest. - Nuts and Bolts for Assembly G.I. - Knobs on the Wheel for Gripping Rubber - Movement must be supplied with bearings Yes - Bearings Ball Bearing Ball Bearing, Tapered Roller Bearing Bearings shall be self lubricating and sealed for protection against Rain and dust etc Yes - Closing Caps of open ends of the pipes, bearings, bushes and base Fibre Reinforced Plastic - Thickness of closing caps ( min ) 3 - All Plastic Components U V stabilised, weather resistance - COLOUR Colour As per buyer's requirements - Paint/Finish Powder Coated, UV resistant - Paint Coating Thickness ( min ) 80 - OTHER REQUIREMENTS Ergonomic Design Yes - There shall be no crushing or searing points for user between moving and/or stationary parts of equipment during use Yes - Equipment shall be free from entrapments and Yes - 3/5 sharp edges Installation Instructions must be provided Yes - Installation Not Included Included, Not Included Safety and quality Requirements European Standard EN 16630: 2015 latest - Instruction Plate Stainless Steel, Size 150 X 230 X 0.7mm, with indelible printing - CERTIFICATION Certfication ( Safety and Quality Requirements ) No As per European Standard EN 16630, No Registration No and Validity of Registration 17DQCE26 ISO 9001:2015 - APPROVAL Drawing depicting detailed dimensions and foundation details shall be got approved from buyer before installation, if desired by buyer Yes - WARRANTY Warranty ( years ) 2 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Narendra Kumar Rai 313332, Deogarh Road Amet 2 15
Refrigerated micro-centrifuge Experience with Gov. Required 2 Year (s) Refrigerated Micro-centrifuge ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values SET 1 Microprocessor controlled High speed Micro centrifuge Yes - Maximum permissible Speed (RPM): - - Relative Centrifugal Force (RCF), Max: 20, 000 x g to 22, 000 x g - Temperature Range - 10 degree C to +40 degree C - Refrigeration System: Must be CFC free. - Display for Speed, RCF, Temperature and Time parameters: Yes - Type of Display: LCD display LCD display Facility for short run operation Yes - Imbalance System and Selectable acoustic Alarms Yes - Running Modes available: soft/fast accelerate, decelerate and break off mode Yes - 1/3 Operation of equipment: By simple knob(s) By simple knob(s) Angle rotor Polypropylene/metallic 24 x (15/10) ml or Dual row rotor with same capacity/volume Yes - Lid Aerosol tight Polysulfone or equiv. Lid - Certification: US FDA US FDA, CE(European) Adopter for PCR tube sizes: 0.2 ml and 0.5 ml - Time Selection: 1 to 99 min or continuous - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ganesh Kumar 325205, Govt. Girls College Baran Baran Rajasthan 2 15
heated display cases-hot case Experience with Gov. Required 2 Year (s) Heated Display Cases-hot Case ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Heating Chamber Size (IN LitrEs) 100 - Number of compartments (in nos) 5 - Maximum Hot Case temperature (Degree in C) 100 - Inside Finish SS SS, Painted MS, Ceremic Coating Material of partition/Shelves SS MS, Al, SS Temprature Control System Thermostatic Electronic, Thermostatic Type of Door/Shutter Shutter Sliding door, Shutter Display of Hot Case Temp No Yes, No Material of Door Other Glass, Other CONSTRUCTIONAL Over all Size (mm) 1800X600+225X850 - Operating Voltage (Volt) 230AC - Weight (in Kg) 55 - 1/2 Maximum Wattage (KW) 3 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ganesh Kumar 325205, Govt. Girls College Baran Baran Rajasthan 2 15
pH Meter Experience with Gov. Required 2 Year (s) PH Meter ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values CONFIGURATION Type Microprocessor Based Microprocessor Based, Microcontroller Based Display LED/LCD/Touch Screen, 3 digits - Calibration up to 3 points with auto buffer - pH Range (pH) 0.00 to 14.00 - Accuracy (pH) +- 0.05 +- 0.05 Corrosion Resistant Yes - Power Requirements 230 V +- 10, 50 Hz AC - Modes pH mV- C - Parallel temperature indication Yes - Temperature Compensation Type Automatic Automatic, Manual Temperature Accuracy (Degree C) +- 0.3 +- 0.3 Temperature Compensation Range (Degree C) 0 to 100 - Resolution (pH) 0.01 - 1/3 Operating Humidity: RH in (%) 100 - Operating Temperature (Degree C) -20 - Warranty Warranty (Year) 3 3 Storage pocket for pH electrode Yes - Ingress Protection, Water Tight NA - Impact Resistant Yes - System to be supplied with Measuring electrode combined & glass calomel, temperature probe, Electrode Stand, calibration buffer and maintenance kit, operation manual, power cable and plug Yes - CERTIFICATIONS Availability Of UL/CE Certification As Per EN 61010-1:2010 Safety Requirements For Electrical Equipment For Measurement, Control, And Laboratory Use General Requirements NA - Test Reports For EMC/EMI As Per EN 61326-1:2013 Electrical Equipment For Measurement, Control And Laboratory Use EMC Requirements General Requirements (Test Reports Are To Be Furnished When Demanded By Buyer) NA - Availability Of Test Reports From Central Govt/NABL Approved ILAC Acredited Lab To Prove Conformity To The Specification (Test Reports Are To Be Furnished When Demanded By Buyer) false - Test Report Number and Date NA - 2/3 Name and address of the Lab NA - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ganesh Kumar 325205, Govt. Girls College Baran Baran Rajasthan 2 15
Multimedia Projectors