Southern Railway Tenders

One rake set of hardwares (Group-1) for VB /TS consisting of 30 items

Stainless Steel Toilet Lock Set for Vande Bharat Coaches

Feeders- 1 & 2 and Bus Coupler Power Contactors.

Diesel forklift 3T cap

12V, 400W LED DRIVER HAVING WATER PROOF

Silica Gel Breathers

13 PIN UIC COUPLER PLUG ASSEMBLY.

Details of Hydraulic Rubber Hose, Hydraulic Pump, Hydraulic Seal kit & Hydraulic Oil pressure valve etc.

SELF Starter motor 42 MT, 24-Volt

LCC 107 B1 & B2 FOR 1400 HP

Hexagon Head Bolt

Earth discharge rod complete and accessories

Circuit breaker without Auxiliary contact 63A for Traction Motor Blower and Oil cooling.

Comprehensive Annual Maintenance Contract for Static inverter of MEDHA make 2 X 130 KVA Static Inverter provided in Electric locomotives available at Loco Shed, Southern Railway, Salem Division, Erode for 36 Months (194 loco months).

MPCB for compressor

M.S. Plate 12mm x 1600 x 10000mm long

CANNULATED DRILL BIT 3.5/1.35MM DIA 160MM LENGTH / CANNULATED DRILL BIT 2.7/1.35MM DIA - 160MM LENGTH.

CASPOFUNGIN ACETATE 50 MG INJ & ISAVUCONAZOLE 100 MG CAP

1) UBIDECARENONE 100 MG + SODIUM SELENITE 100 MCG + LYCOPENE 4000 MCG + ARGININE 100 MG CAP, 2) L-ARGININE GRANULES 5 GM SACHET & 3) CLINDAMYCIN IP 100 MG+ CLOTRIMAZOLE 100 MG+TINIDAZOLE 100 MG SOFT GELATIN CAPSULES

M.S. Plate

ISMB 400 of length 6m conforming to IS 808 and IS 2062/2011

WAVEY WASHER

SINGLE CHAMBER RATE RESPONSIVE PACEMAKER.

ISMC 250 of length 6m conforming

PASSANGER EMERGENCY PILOT VALVE AND COVERING emergency brake pull Box

Supply of LHB Passenger emergency alarm valve.

SELF EXPANDABLE TRANSCATHETER AORTIC VALVE IMPLANT SET CONSISTS OF THE FOLLOWING IN STERILE INDIVIDUAL PACK, (I).TRANSCATHETER HEART VALVE - 01 UNIT. IT SHOULD BE MADE OF BOVINE/PORCINE PERICARDIUM TRI LEAFLET VALVE , MADE OF MEDICAL GRADE ALLOY. THE SIZE OF THE VALVE SHOULD RANGE FROM 20 MM TO 35 MM OR MORE. (II).VALVE DELIVERY SYSTEM-01 UNIT (III).BALLOON DILATATION CATHETER-02 UNIT BALLOON SIZE RANGES FROM 16 MM TO 35 MM WITH 30 MM LENGTH FOR PRE AND POST DILATION. (IV).INTRODUCER SHEATH 01 UNIT COMPATIBLE WITH ALL VALVE SIZES. SHOULD HAVE HAEMOSTATIC VALVE SHOULD BE COMPATIBLE FOR FEMORAL ARTERY SIZE RANGING FROM 5 MM TO 7 MM. (V)INFLATION DEVICE -02 UNITS (30ML/40ML/60ML) (VI)SYRINGES 50CC- 02 UNITS (VII)EXTRA SUPPORT DOUBLE CURVE 0.035INCH WIRE-240CM FOR VALVE DELIVERY (VIII) SUTURE MEDIATED VASCULAR CLOSURE DEVICE- 2 UNITS.(IX) TEMPORARY PACING LEAD-01 UNIT FOR BURST PACING. THE FIRM SHOULD BE ABLE TO SUPPLY ANY SIZE OF VALVE, DELIVERY SYSTEM AND BALLOON SUITABLE FOR THE PATIENT.

A set of gaskets

Base frame for EFT as per ICF drawing No. ICF/STD-1-5-042, Alt g.

Thermostatic expansion valve 4.5 TR suitable for use with R - 22 / R - 407C refrigerant equivalent to per Danfoss catalogue No. 068U2075.

Compact Fluorescent light fitting (for entrance) without electronic ballast to ICF drawing No. ICF/STD/7-6-025,

Supply, erection, testing and commissioning of Test cum work bench with necessary protecive devices as per specifications mentioned in the drawing No.Genl/PER

SELF ALIGNED DOUBLE ROW SPHERICAL ROLLER BEARING

OVERHAULING KIT

ENAMEL, FINISHING WHITE PAINT

BUSH FOR BRAKE RIGGING KIT

HEXAGONAL HEAD BOLT

Happy pads

Rust Remover Spray in Aerosol container to WD 40 in 420 ml

Bearing shock pulse condition analyser with shock pulse function 19-99dBPV,

Stainless steel Boss with Outer dia.20 mm, inner dia M10 tapped to suit M10 size bolt of length 20 mm AISI 304

Slack adjuster Assembly (Bottom) complete with bush for WAP-7 Locos

Set of Pins and bushes for Brake rigging of WAP-7 locos

Relay High Voltage Over load with locking arrangements type (DI-QLM)

Non Drive End Cylindrical Roller bearing of suspension tube of WAP-7 loco

Overhauling kit for M/s Elecromech make or M/s Knorr Bremse make wiper motor

DRY SILICA SAND FOR LOCOMOTIVE

All steel Lock-nut for WAG-9 & WAP-7 Locomotives

Set of DC / DC converter [24V and 48V] [pos no-118.5 & 118.4]

Contactor Control circuits on 110V (Min-77V to Max-137.5V)