Loading
Loading…
Loading…
224 results • Latest
SHOULDER PIN ASSEMBLY FOR IR03H TYPE PANTOGRAPH AS PER M/S CONTRANSYS PART NO COH1110.
Supply and Testing of 80 Nos. 12V 7 AH S [Supply and Testing of 80 Nos. 12V 7 AH Sealed Maintenance free lead acid battery for UPS with on site OEM Warranty for 12 months from date of supply or commissioning whichever is later. Make Exide/Luminous/Amco/Zebronics/Okaya/Zebion/relicell.]
Supply of modified Grab Rail (Handrail) [Supply of modified Grab Rail (Handrail) cab side door for three phase locomotive as per CLW Drawing No. 1209-09.431-040 ALT- 2 and Specification No. CLW/MS/3/038 ALT-11. One loco set consists of 08 pieces. (Item reserved for CLW Approved sources only).]
FUSE FOR AUXILIARY, 415/110V ALONG WITH [FUSE FOR AUXILIARY, 415/110V ALONG WITH BASE WITH MICRO SWITCH AS PER CLW SPECIFICATION NO.CLW/ES/3/ 0092 ALT-D as per Drg.No. IS:13703 PART-II IEC-269-2]
GEAR CASE MOUNTING LUG BUSH FOR TRACTION MOTOR TYPE HS 15250A.A- COLLER THICKNESS=9.00+0.20MM-0.00MM,B-LENGTH=42.00+0.5MM-0.00MM. ELW/BSL/WAG-5/4/150.054 Nos.
SET OF END SHIELDS DE AND NDE SIDE END SHIELD FOR MCP MOTOR 15 KW, 20HP FRAME ND 200L OF M/s CGL MAKE MOTOR FOR THREE PHASE LOCOMOTIVES.
SET OF LONGITUDINAL TUBE FOR IR-03H PANT [SET OF LONGITUDINAL TUBE FOR IR- 03H PANTOGRAPH ONE SET CONSISTS OF 02 ITEMS (1) LONGITUDINAL TUBE LEFT SIDE TO CONTRANSYS PART NO. C0H1410, QTY: 01 NO/SET, (2) LONGITUDINAL TUBE RIGHT SIDE TO CONTRANSYS PART NO. C0H1410, QTY: 01 NO/SET]
WIRE WOUND RESISTANCE SILICON COATED VAL [WIRE WOUND RESISTANCE SILICON COATED VALUE 01 ohms +/- 10% 200 WATTS DIA 30mm LENGTH 250mm AS PER IS 8909/1978 MAKE MONOLITE CLW APPROVED BRAND ]
Design, Development, Supply, Installatio [Design, Development, Supply, Installation (Including civil work such as machine foundation work etc.) and commissioning of Hydraulic Sandwich Mounting Testing Machine along with Digital Load indicator and Digital length measurement device and computerized load deflection graph plotting facility. (Refer technical specification attached herewith).]
Vinyl Coated Upholstery Fabric [Artifici [Vinyl Coated Upholstery Fabric [Artificial Leather] conforming to RDSO Specification No. RDSO/2008/CG-07 (Rev.01) of Sept-2023. Shade, Colour and Pattern as per RDSO s Sample No. ALNAC03 for Non-AC coaches. Make/Brand- As per RDSO Specification. ]
SAFETY VALVE (PRESSURE RELIEF VALVE) SUI [SAFETY VALVE (PRESSURE RELIEF VALVE) SUITABLE FOR 3 PHASE LOCO MAIN TRANSFORMER WITH AN OPERATING PRESSURE OF 0.8 BAR AS PER ABB ID NO. HSTN 400429 P0003.]
Synthetic Rubber Nitrile Bonded Cork Com [Synthetic Rubber Nitrile Bonded Cork Composition sheet GR. RC70-A Type C fine granules size 900+/- 15 mm x 600 +/- 10mm x6.35 mm thick conforming to IS 4253 (Part 2): 2008 Amendment No. 1 October 2010. Sheet to be stamped with mfg. s. name, month year of Mfg. in Ink & packed in polythene bag duly sprinkled with chalk powder individually.]
INSULATING WASHER FOR THREE PHASE LOCOMO [INSULATING WASHER FOR THREE PHASE LOCOMOTIVE AS PER S.C.RLY DRAWING NO. C/ELS/LGD/TFP/4/38 PROCUREMENT RESERVED FOR CLW APPROVED SOURCES ONLY.]
Hex Head Screw M 14 X 20 MM (PC 8.8 Zinc [Hex Head Screw M 14 X 20 MM (PC 8.8 Zinc Plated) as per IS-1364 Part-2(2002), DIN 933, Grade 8.8 with Zinc Plated.]
SET OF HARDWARE REQUIRED FOR DETC 20T TO [SET OF HARDWARE REQUIRED FOR DETC 20T TOWER WAGON AS PER ANNEXURE ATTACHED ( 1 SET CONSIST OF 38 ITEMS )]
DOUBLE VANE PUMP For BRM R-02H machines, [DOUBLE VANE PUMP For BRM R- 02H machines, Equivalent to Plasser Part No.: HY831X17.12RE and Veljan Denison Part No.: T6DC-017-012-3R02-B1-00, Part Make: PLASSER/PARKER-DENISON/ VELJAN-DENISON. ]
Load Distribution Contactor/AF210B-30-11RT 48- 130 V 50/60Hz/DC Cont. ABB PART NUMBER NO. 1SFL517062R6911.
HYDRAULIC HOSE PIPE No.: 1 & 1/2", SAE 1 [HYDRAULIC HOSE PIPE No.: 1 & 1/2", SAE 100R1 (Return Hose No.: 24) Max working pressure 50 BAR, for BCM, BRM, CSM, DUO, UNI machines. Make: EATON /AEROQUIP /PARKER /POLYHOSE / EATON WINER.]
RUBBER SLEEVE for BRM machine. Part No [RUBBER SLEEVE for BRM machine. Part No.: 0165-36-082, HSN Code.: 40169990, Make: DEUTZ, ]
HP Needle Bearing Roller RNA 6902 to E [HP Needle Bearing Roller RNA 6902 to ELGI Part No. 000903711 for RR20100 Compressor.]
MLRMS ANTENNA ASSY FOR MCS657V3, CODE: [MLRMS ANTENNA ASSY FOR MCS657V3, CODE: - SP657V31009, MAKE: - MEDHA.]
Foot step arrangement for WAG 7 as per D [Foot step arrangement for WAG 7 as per Drg. No. B/TRS/G7/BOGE/3/224 Ref-1 to 5 as follows. (1) Ref No.1 - Rolled channel (75 x 40x 6thk x 475LG). Qty= 02 No s/Set. (2) Ref No.2 - Rolled angle (65 x 65 x 6thk x150LG).Qty= 02 No s/Set. (3) Ref No.3 - Chequered plate 5thk. Qty= 01LH no & 01 RH no/set. (4) Ref No.4 - Gusset. Qty= 02 No s/Set. (5) Ref No.5 - Gusset. Qty= 06 No s/Set. Note: (1) All dimensions are in mm. (2) Material shall be supplied in assembled condition only as per drawing.]
Vinyl Coated Upholstery Fabric [Artifici [Vinyl Coated Upholstery Fabric [Artificial Leather] conforming to RDSO Specification No. RDSO/2008/CG-07 (Rev.01) of Sept-2023. Shade, Colour and Pattern as per RDSO s Sample No. ALNAC03 for Non-AC coaches. Make/Brand- As per RDSO Specification. ]
Set of Anti Vibration rubber pad for MVM [Set of Anti Vibration rubber pad for MVMT foundation and duct for MVMT as per Drg No-ELS/VSKP/2004/5. One set consists of 2 items 3 Nos. Material is to be procured from CLW approved sources only. CLW item ID-2101221.One sample to be got approved before effecting bulk supply. ]
All Steel FS Lock Nut size M20 x 2.5 P a [All Steel FS Lock Nut size M20 x 2.5 P as per CLW Spec No.CLW/MS/3/089 (Alt-3) or latest for traction link and pivot housing bolts of WAG9/WAP7 Locomotive. (CLW Item ID-2100289)]
LP piston for KBIL makes oil free compressor model VV270-T.as per KBIL Part no- 8.181.0.160.012.7
Hexagonal Head Bolt of Size M 24 X 110 m [Hexagonal Head Bolt of Size M 24 X 110 mm Long as per IS:1364 Part 1:2002 or latest, Property class 8.8. ( UVAM Item ref.: 2100143). Item to be procured from CLW approved sources only. ]
All Steel FS Lock Nut size M24 as per CL [All Steel FS Lock Nut size M24 as per CLW Spec No. CLW/MS/3/089 (Alt-3) or latest for wheel set axle guide rod and torque arm bolts of WAG9/WAP7 Locomotive. (CLW Item ID-2100289)]
Microprocessor based control and fault d [Microprocessor based control and fault diagnostic system with remote monitoring and analysis feature (MPCS) for 25 KV AC electric locomotives as per RDSO specification No. ELRS/SPEC/MPC-FDS/0001 Rev-3, April-2013 including central and backup data logging & processing system. Material to be procured from RDSO approved vendor as per RDSO ITEM ID.- 3100685.]
Heavy Duty Double polyester webbing slin [Heavy Duty Double polyester webbing sling with standard eye loop at both ends per IS: 15041-2001, BS EN 1492-1-2000 each sling should be ISI marked & supplied with test certificate from govt. approved test house, capacity-03 Ton, Length-4 mtr., Width-75mm, Thickness - 12mm.]
VALVE (30 TRUSS) For TRT Machines, Part [VALVE (30 TRUSS) For TRT Machines, Part No- 0-3333010-0-05, Part Make: HARSCO, AMC No.: 367 ]
PNEUMATIC DIESEL FILLING PUMP PRESSURE R [PNEUMATIC DIESEL FILLING PUMP PRESSURE RATIO 1:1, OUTPUT 20 LPM, WORKING PRESSURE 4.5 TO 8.5 KG/SQ CM, RECOMMENDED WORKING PRESSURE 8.5 KG/SQ CM, AIR REQUIREMENT 325 LPM. required for replacement on Track machines. Part Make: PENTA/ELGI/GROZ ]
CABLE, PUSH PULL For BRM 114, BRM 117 ma [CABLE, PUSH PULL For BRM 114, BRM 117 machines, Part No.: 132179, Make- KERSHAW ]
ELECTRIC LIFTING CYLINDER, for T/Exp mac [ELECTRIC LIFTING CYLINDER, for T/Exp machines. Part No. EL-T7091.00, Make- PLASSER/SUNPARTS, NOTE: Material supplied by firm should be fitted on machine without any modifications and all ports & mounting should match as per existing part on machine and all function of item should work successfully.]
PRESSURE GAUGE/0-5BAR/24V For BCM, DUO, [PRESSURE GAUGE/0-5BAR/24V For BCM, DUO, CSM machine, Part No: EL-T7138.00B Make: PLASSER HSN Code.: 902620 NFR AMC No.: 5462 ]
CARDAN SHAFT For CSM machines, Part N [CARDAN SHAFT For CSM machines, Part No.: KGV180.1000.110.80, Part Make: PLASSER, HSN Code.: 848310, AMC No.: 7041, WARRANTY: 06 months from the date of supply. ]
OT PICK-UP PUMP For TRT-1005 machine, P [OT PICK-UP PUMP For TRT-1005 machine, Part No.: A6602Y02, Part Make: HARSCO ]
HYDROSTATIC MOTOR For TRT-1005 machine, [HYDROSTATIC MOTOR For TRT-1005 machine, Part No.: TY768773-005, Part Make: HARSCO, HSN Code.: 841280, AMC No.: 279 ]
CHECK VALVE for T/Exp machine. Part No [CHECK VALVE for T/Exp machine. Part No: PN90.380 SUB.: PN90.380-A, PN90.380-B, Make: PLASSER, HSN Code.: 842139, AMC No.: 7932, ]
AIR FILTER {INNER} For T-28 Machines. P [AIR FILTER {INNER} For T-28 Machines. Part No. 4113-0027A, Make- SUN-VM Motori/AMECA, HSN Code: - 84212300, BQ No.: 02 ]
GREASE, Equivalent to Mobil Temp SHC 32 [GREASE, Equivalent to Mobil Temp SHC 32 for RGM machines. Part Make: LORAM/IOCL/HPCL/BPCL/BHARAT SHELL/BALMER LAWIRIE/GULFOIL/MOBIL. Note: Authorized dealer certificate to be submitted with supply. ]
LUBRICATING GREASE, Equivalent to Shell [LUBRICATING GREASE, Equivalent to Shell Gadus S3 V220 C2 (1 x 180 Kgs) for MPT, PCTM, DT/Exp, FRM, UTV (Under warranty) machines. Part Make: HPCL/IOCL/SHELL TELLUS/BALMER LAWRIE/BPCL/GULF HARMONY. Note- The supplied grease should be in barrels of 180 Kgs. ]
Supply of cage for scrap material as per [Supply of cage for scrap material as per ELW Drawing no. ELW/BSL/4/51.686 or latest.]
Set of Items For Line Contactors. Set Co [Set of Items For Line Contactors. Set Consists of 02 items as follows. (1) Special Square head Bolt of Size M6x30 as per CLW Drg.No.- 4TWD.112.118 Alt. 03 Qty- 01 No/set (2) Square Head Bolt of Size M6x24 as Per Drg.No.- 4TWD.112.119 Alt.03 Qty 1 no./set Note :- High Tensile bolt grades 8.8 Make- Unbrako/TVS/DFL. One sample should be got approved before effecting bulk supply.]
Handheld Rechargeable Pocket Torch havin [Handheld Rechargeable Pocket Torch having Aluminium body, LED light- min 2W, Li-ion battery- min 1800 mAh, Head dia- max 30 mm, Length max- 130mm to be supplied with suitable external battery charger. Make- JY SUPER 859 or similar with equivalent specifications.]
Heavy duty Pipe Wrench, Nominal Size: 35 [Heavy duty Pipe Wrench, Nominal Size: 350mm Note: Material must be of following make: Taparia, Stanley Gedore, Ridgid, Snap On and Proto only.]
Grease pot [4ml capacity, plastic body, [ Grease pot [4ml capacity, plastic body,] having dimension 25mm [ID], 27mm [OD], 1mm thickness and 8.3mm depth for direct reading ferrogram for wear analysis ]
HEX REDUCER For Tamper Track Machines. [HEX REDUCER For Tamper Track Machines. Make: PLASSER/SKF/LINCOLN/CENLUBE SYSTEM/DROPCO, BO Sr. No. 10]
1. CABLE 110 10G1 For Track Machines. Equi [CABLE 110 10G1 For Track Machines... 2. CABLE KVM OY-16X1.0 For Track Machines... 3. CABLE KVM OY-5X4 For Track Machines...
KE VALVE (CONTROL VALVE) Equivalent to P [KE VALVE (CONTROL VALVE) Equivalent to Plasser Part No.: 90350/3.8 For BCM machine, Part Make: PLASSER/ESCORTS, WARRANTY: Up to 30 months from the date of supply ]