STORES/BHUSAWAL/ACL/CENTRAL RLY Tender Results

ELGI MAKE AIR FILTER ASSY DRY TYPE MN PART NO 070309310

Rotary switch for Cab Heater. CLW spec. [Rotary switch for Cab Heater. CLW spec. No. CLW/ES/3/0108 Alt.-A , ABB ID No. HBTB 585580R5022.]

DIP STICK WITH PLUG FOR AUXILIARY COMPRE [DIP STICK WITH PLUG FOR AUXILIARY COMPRESSOR CRC150 AS PER ELGI PART No. 0004700540 OR SIMILAR OF OEM OF AUXILIARY COMPRESSOR.]

Maintenance kit for isolating cock for

Fire Resistance Cement as per CLW Drg. / [Fire Resistance Cement as per CLW Drg. / Specn No. CLW/ES/3/0168 Alt.04. Material to be procured from CLW approved source as per CLW item ID 2100183.]

Polyester round endless sling of capacit [Polyester round endless sling of capacity 3 ton x 6 metre circumferential length (3 mtrs effective length), Safety factor - 7:1. Make: Simplex (or) Samson (or) Marine allied engg co. (or) slingset (or) greenfield or similar with test certificate from government approved test agency. Firm should submit authorized dealership certificate along with tender otherwise offer will not be considered.]

SET OF COPPER BUSBARS FOR 7775 KVA TRANS [SET OF COPPER BUSBARS FOR 7775 KVA TRANSFORMER, ONE SET CONSISTS OF FOLLOWING 02 ITEMS (1) BUSBAR COPPER TYPE 70 AS PER SPEC CLW/ES/3/0412 ALT-H OR FIG 39 OF SPEC CLW/ES/3/0118 ALT-M, QTY- 02 NOS. (2) BUSBAR COPPER TYPE 71 AS PER SPEC CLW/ES/3/0412 ALT-H OR OR FIG 40 OF SPEC CLW/ES/3/0118 ALT-M, QTY- 02 NOS. (ITEM RESERVED FOR CLW APPROVED SOURCES ONLY)]

Ignition Transformer along with flasher and coil suitable for high pressure waterjet

Half inch square drive Pneumatic Impact

Set of Stainless Steel Pipe Fittings as [Set of Stainless Steel Pipe Fittings as per CLW Specification No. CLW/MS/3/053 ALT.21 required for WAG-9 locomotive. One set consists of 04 items 80 nos. as per annexure attached. Material to be procured form CLW approved source as per CLW item id no. 2100097.]

Set of Screw Type Terminal Block for WAG [Set of Screw Type Terminal Block for WAG-9 & WAP-5 To CLW s Spec. No.- CLW/ES/3/0645 (Alt.-F or latest). Set details as per Annexure A attached. Note - Material to be procured from CLW Approved Sources or their authorized dealers only as per CLW Item ID 2100410.]

Set of Locking Plate for Centre Pivot ring and Centre Pivot housing for WAG-9/WAP-7

CONSERVATOR TANK WITH STUCHI COUPLING FOR 3-PHASE LOCO

Brass insert 6mm OD for Nylon tube as pe [Brass insert 6mm OD for Nylon tube as per CLW specification no. CLW/TS/99/CF/5 Alt.8. Material to be procured from CLW approved source only as per CLW item ID no. 2100090. One sample must be approved by consignee before bulk supply.]

1. Piggy Back lug for 1.5 sq mm cable as pe [Piggy Back lug for 1.5 sq mm cable as per TE connectivity Drg No.- C-160834. (To be procured from CLW approved sources only.)] 2. Piggy Back lug for 1.5 sq mm cable as pe [Piggy Back lug for 1.5 sq mm cable as per TE connectivity Drg No.- C-160834. (To be procured from CLW approved sources only.)]

Adjustable Spot Light 24V DC for Driver [Adjustable Spot Light 24V DC for Driver and Assistant Driver Desk Illumination (Lamp Should Be LED Based) For 3 Phase Electric Locomotive to Spec No. CLW/ES/3/0042/D. Quality Should Be Tested as Per Clw Spec No. CLW/ES/3/0654. ]

Set of items for Gas cutter of make ESAB or its equivalent in Messer and ADOR. Set consisting of 06 items as per annexure attached.

Locking Block for Adopter Bolt of WAP-1/ [Locking Block for Adopter Bolt of WAP-1/4 Loco bogie as per ELW BSL Drg No. ELW/BSL/4/F64.051]

SET OF INDICATION LAMP AND ILLUMINATED PUSH BUTTONS. SET CONSISTS OF ALL ITEMS AND QUANTITY COMPLETE AS PER CLW SPECIFICATION NO. CLW/ES/3/0072 ALT-I.

Wheel Profile Gauge as Per DRG No. SKDL [Wheel Profile Gauge as Per DRG No. SKDL 3592 Alt-6 (For Measurement of Flange Wear, Root Wear, Tread Wear, Tyre Thickness, Wheel Diameter and Flat Spot, Measuring Gauge) with calibration certificate from NABL approved lab shall be submitted along with supply model no- Twg-1. Make - Jyoti, Paragon, MJ Trading and Ganapathy or similar.]

6A, 5 pin socket as per IS: 1293/2005 with ISI marking and body material of poly carbonate electrical grade. Make: ANCHOR, CONA, HAVELLS, LEGRAND & SCHNEIDER only.

Procurement, installation and commission [Procurement, installation and commissioning of hydrogen gas leak detector with atleast one year Warranty as per Annexure A.]

Demineralized water as per IS 1069. Note: 1200 liters to be supplied monthly in cans, and the empty cans will be returnable to the supplier with the subsequent delivery.

Procurement of - Set of Feeler gauge co [ Procurement of - Set of Feeler gauge consists of 10 Blades 0.01mm to 0.1 mm in steps of 0.01 mm, Length- 100 mm. Make- VEPTEX or similar.]