Loading
Loading…
Loading…
379 results • Best match
Repair of Dilapidated D ward ASG office at D Ward
Providing & fixing FULL HEIGHT BOTH SIDE LAMINATED PARTITION at required location having height more than 2.8 meter & minimum 77 mm thick made by using 50 x 50 mm (finished size) approved quality seasoned TW section framing at 600 mm center to center,covered with 12 mm marine ply generally confirming to I.S.303 / I.S.710-1980 on both sides.The partitions shall be finished with 1.5 mm thk.approved quality laminate matt/suede/fine line finished lamination pattern with grooves on both sides with necessary lipping (BTC) moulding. Antitermite treatment to plywood and woodwork, door frame including all leads & lifts etc complete as per Architect's Drawing and instructions of Engineer In Charge.
M and R to NRB at Udyog Sarathi Bldg.. Renovation work of CAO cabin, anti chamber and Work station office at A-wing, 1st Level at Udyog Sarathi Building, Andheri (E), Mumbai- 93.
Providing and fixing 3mm - 4mm thick group matching Decorative Veneer of approved quality and make, of required size and width as per site condition including surface preparation pasting with approved adhesive and finishing it evenly to get flat surface. The cost of openings for switches, AC Facia, any other cutout etc. shall be included in the rates quoted. complete as per detail drawing & directions by Architect. No extra payment will be made towards providing any pattern .The item includes finishing the surface with 3 or more coats of melamine polish as per the direction by Architect. (Rates excluding GST)
Tender for rate contract for the period of one year for hiring a consultant to carry out CCOE Drawing preparation work and allied services for upcoming CNG stations for CGS network of MNGL for Pune, Nashik, Sindhudurg, Ramanagara, Nanded and Nizamaba
ELITE ARCHITECT & CONSULTANT (BID ID -1007995)
Appointment of an Agency to Supply, Install and Commission Backbone Internet in Range Forest Offices and designated Areas in Tadoba Andhari Tiger Reserve (Core and Surrounding Areas).
This unit shall be a 5 GHz outdoor wireless bridge with an integrated directional antenna of minimum 27 dBi gain, suitable for medium- to long-range links. It shall operate in both PtP mode and as a subscriber unit in a PtMP architecture. The device shall use a TDMA-based air interface protocol to ensure stable throughput, interference mitigation, and efficient spectrum usage. It shall include Gigabit Ethernet connectivity and support passive PoE power. The enclosure shall be weatherproof and UV-stabilized, designed to withstand dust, rain, wind, and temperature variations typical of remote outdoor installations.
Hiring of Agency for preparation and Installation of Flex Hoardings and Signages in the mela ground and its surroundings and refurbishing repairing repainting of existing permanent hoardings and signages during 39th Surajkund Crafts Mela 2026
P/F Hoarding/ signages/informative boards of the flex printing without frames. (only flex with 04 nos. PYLETS). The firm will fix the flex prints at the designated places as per the instruction of Architect cell/SKMA and breakup given in scope of work. The rate may be quoted for designing, printing, fixing & removal.
Please refer in BOQ
Providing Architectural/Engineering Consultancy Services including preparation of Architectural drawings, Structural design, detailed drawings, estimates, DPR and other allied consultancy services for various Building, Bridge and Road works under R&B Division Billawar as per scope of work and terms & conditions of the tender
