Asphalt & Road Surfacing Tenders

M & L for preparing of black top surface by brushing with wire brushes, sweeping wit brooms & finally cleaning with air compressor to remove all loose dirt & applying a tack coat of Cationic bitumen emulsion (RS-1) conforming to IS : 8887 at a rate of application of 0.3 Kg/Sqm on bituminous surface as specified in Table 500-5 of MoRTH specification for road and bridge works 2013, using mechanical sprayer after cleaning of existing surface as specified and directed. Make: OOMS POLYMER BITUMEN PVT LTD/ SHELL SPRAMUL - SS1/ HINCOL BITUMEN EMULSION/ other make as specified here-in-after.

aggregate as per required gradation with asphalt of VG-30 grade at the rate of

Material & labour repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) omplete all as specified and as directed.

aggregate as per required gradation with asphalt of VG-30 grade at the rate of

aggregate as per required gradation with asphalt of VG-30 grade at the rate of

2.5 cm premix carpet surfacing with 2.25cum and 1.12 cum of stone chippings of 13.2 mm and 11.2mm size respectively per 100 sqm and 52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively including a tack coat with hot straight run bitumen including consolidation with road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately). With paving Asphalt grade VG-10 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt