Asphalt & Road Surfacing Tender Results

Providing and laying Bituminous concretete 30mm/40mm thick using 0.13 cum of 19.00-9.50mm grade dmetaland 0.17cum of 9.50-2.36mm grade dmetaland 0.26 cum of 2.36mm & below metal with 45.27kgs of 60/70 bitumen & 5.03Kg of Plastic waste (Total-50 . 30 kg) and for premixing per 10 sqm including cost and conveyance of all materials to CMP site, heating the bitumen and agregates to require dtemperature and mixing the min required temperature in central hot mix plant 20-30 tonnes capacity conveying themix by tipper trucks top a versite, spreading the mixin required temperature for uniform thickness of 40mm /30mm with mechanical paver to the specified grades and crosssections and compaction by Vibratory roller to the required density etc., including labour charges for loading bitumen into bitumen tank and metal to fee derunit, labour for attending to paver site etc., including hire charges and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, paver finisher, Vibratory roller sand all ot her too lsand plants required, including all ot herincidental charges etc., complete using CMP clause 507 of MORTH Rev - 5

Painting center line, edge line road marking 100width with Thermoplastic paint (hot application) in such a way that painting length will be 3.00m with a gap of 3.00m with a gap of 3.00m curved for centerline will be 3.00m with a gap of 3.00m curved for center line by indigenous hand propelled road marking machine with single coat including cost of all materials such as pigments, extender, fine aggregate stand oil (binder) glass beads as per 3262:1976 for the preparation of thermoplastic paint at site mixing glass beeds 10%by weight of the ingredient at the time of application of paint on the road surface, including cost of all etc., complete

Advance Patch work 13.20mm Providing Advancve Patch work using 50mm consolidated Thickness by using 1m3 of 13.20mm IRC Metal with 44kg of Bittumen per 1m3 of Metal For Pre Mixing For existing surface advance Patch work including cost and conveyance of materials to the work site and stacking them to the departmental metric guage for the pre measurement, heating the bitumen in bitumen boiler, heating the aggregate sand mixing them with bitumen in mini hot mix plant for premixcarpet only rolling by 60-70KN power roller for premixcarpet and seal coat seperately including labour charges for spreading the mix for premixcarpet application of bitumen for seal coat over premixcarpet, including labour charges for spreading seal coat seperately over premixcarpet etc. including higher charges and fuel charges for, bitumen boiler and all other tools and plant employed etc. complete as per of MoRTH Rev - V Specifications