Asphalt & Road Surfacing Tender Results

M&L for cleaning old/new dirt, oil/ grease spots and foreign materials etc, from road surface and applying 2.5mm thick thermo plastic (retro reflective) road marking paint for marking white traffic lines, straight or curved, having clear and sharp edges over road surfaces by using thermo plastic paint applicator machine and necessary T&P, including cleaning of roads surfaces, heating the paints within temperature limits specified by the manufacturer, making proper arragement for traffic during operation etc. complete all as specified and directed. Make:- Asian/ Nerolac/ Berger Paints. Note:- Thermo plastic paint material shall consist homogeneously composed of pigment, resins and glass reflecting beads in required proportion as per MORTH specification and conforming to relavent IS. (b) The Contractor will made proper arrangement for traffic diversion and safety rules during laving of painting on Roads.

M&L for Preparing black top surfaces brushing with wire brushes for removing caked mud etc, sweeping with brooms as and finally fanning the cleaned surface with gunny bag to remove all loose dirt’s etc and applying evenly a priming tack coat with tar boiler or cold emulsion as per weather condition with sprinkler (site requirement) on existing black top surfaces with paving bitumen primer using bitumen VG-10 paving grade(80-100 penitration) @ 5 Kg/10 Sqm complete all as specified and directed

Providing and applying primer coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 and requisite quantity on prepared surface of granular base including cleaning of road surface and spraying primer using Mechanical means including cost and carriage of bitumen emulsion and all other incidental costs of work complete as per Clause 502 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). For WBM / WMM Surface With Primer @ 0.85 kg/Sqm.

M&L for preparation of road surfaces and applying thermoplastic reflective paint in marking of minimum 2 mm thick single coat as in centre line and edge line road marking of 100 mm width thermoplastic paint (Hot application) white/ yellow by indigenous modern propelled road marking machine as directed including all ingredients such as blinder, glass beads, Titanium dioxide calcium carbonate inter fillers, thermoplastic requirement for glass beads shall be the table No 800.4 of MORTH specification including spraying of glass beads etc all as per manufacture instructions complete all as specified and directed.

eProcurement System Government of Uttar Pradesh Created By: Sushma Raj Created Date/Time: 29-May-2026 05:11 PM Tender Title: Strengthening of Road (Resurfacing of 75 M wide Road and Painting Work of Central Verge at Gol Chakker to Shaheed Bhagat Singh Park Sec-149 Noida Tender ID: 2026_NOIDA_1134697_1

eProcurement System of Government of West Bengal Created By: SANDIP CHATTERJEE Created Date/Time: 02-Jan-2026 02:49 PM Tender Title: Surfacing work of link road Contai Tamluk to Contai Belda from ch. 0.00km to ch. 0.90km by 20 mm premix surfacing and premixed seal coat (Type-B) etc in the dist of purba Medinipur during 2025-26. Tender ID: 2025_WBPWD_960589_1