Loading
Loading…
Loading…
2,402 results • Best match
SPL REPAIR FOR REPLACEMENT OF CI/ GI WATER PIPE LINE INTO DI (DUCTILE IRON) PIPE LINE IN GTC AREA AT MIL STN KOTA
Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. or for cable laying or not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/ loose soil complete all as specified and as directed.
REPAIR/MAINT AND IMPROVEMENT OF LT DISTRIBUTION NETWORK, LT PANEL, FP BOX AND OTHER ALLIED WORKS IN SECTOR E AND SECTOR F OTM AND MD ACCN IN ARMY AREA UNDER GE (A) No.1 JODHPUR
Supply and spreading clean, dry, fine river tibba sand for under ground electric cable in two layers (8cm thick before laying of cable & 15cm thick after laying cable to a total of 23cm) including gentle punning the sand upto 18cm (total thickness) and consolidated around cable for protection of UG cable complete all as specified and directed. NOTE:- For measurement purpose punned thickness shall be considered as per clause 19.75 of SSR Part-I.
Upgradation of street light system at industrial area Sawar (Kekri), amounting to Rs. 48.42 lakh
Add extra in item no. 11.1 to 11.4 for Laying Charges for cable through Manual Boggi by making pit at regular interval and repairing the pit after laying of cable with PCC/ Bitumin as required.
REPAIR MAINT OF PANEL, EARTHING, LA AND LT CABLES, PANELS PAINTING AT VARIOUS LOCATIONS UNDER GE (MCTE) MHOW
Disconnecting & dismentling of damaged/unsv cable any type/ make and Supply & laying (in repair) cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor using lugs bothe end of cable& wrapping pvc tape over XLPE insulation cable and testing complete all as specified and directed for following size:- (Note:- Excavation & earth work, sand cushioning, bricks protection & GI pipe where required shall be measured & paid seperately)
Hyderabad Division: 53 High mast lights at 10 Goods shed GJWL-4, MDAK-7, DHP- 4, BDHN-5, SIPT-4, JKPT-9, JCL-3, GWD-4, ALPR-9 & VDI-4 of Hyderabad Division- Electrical Arrangements
Cutting of asphalted road/ concrete/ cement/ under the track etc., and excavation of 17 cable trench 30 cm widex90cm deep road etc., for laying of LTUG cable. After laying of cable the trench should be brought to its original position by providing tar/ concrete/ cement as per the site conditions and as per directions of Rly. Engineer.
Remodeling works of existing yards of Gorumahisani Yard and Station Building and other allied miscellaneous works under jurisdiction of Dy CE/Con/II/Kharagpur, S. E. Railway.
Transportation machine/Micro Tunnelling through Horizontal directional drilling (HDD) machine with accessories including handling of stores materials, preparation of sites, boring and laying of DWC/HDPE/GI pipes for crossing of S&T cable at bridges/culverts/track crossing/pucca road crossing. Boring diameter should be at least 110mm & shall be minimum 3 (three) meter below the river bed and minimum 1 m at track/road/pucca road crossing area etc. In case the site doesn't allow to perform as per schedule, written approval must be obtained from at least site in charge officer. The ground level shall be considered ignoring the bank height of the bank of the road. Note: DWC/HDPE/GI Pipe Supply is not covered under this item. Contactor shall provide all material required for work and adequate nos. of labours for proper laying of cables into the bore. Cable shall be laid cautiously so that it should not get damage due to rough handling & pressure on cable. Payment of boring shall be made only after laying of the cables into DWC/HDPE/GI pipe is laid in the bore. Total 775550.00