Cable Laying Tenders

Supply and laying of following 24 core, SM, OFC as per the specification and as indicated below Note: 1) The 24 core single mode fibre should be pulled by use of strength member provided inside the cable by using the proper pulling equipments. 2) The fiber outer sheath should not be damaged while pulling the fiber cable. 3) The polypropelene rope should be kept as spare inside the HDPE pipe, if in HDPE pipe, for the future laying of cables. 4) The force applied on the fiber optical cable should not exceed the pulling force recommended by the manufacturer. 5) While pulling the fiber optical cable, the minimum bending radius should not exceed the manufacturers' recommendation. 6) Pre-despatch inspection to be offered for the OFC. 7) Newly laid cable need proper aluminium tag required (indicating location) & route marker. Also if cable is laid on surface through duct proper aluminum tag should be fitted using ms tie on duct.

Laying of control cable from 33 KV Panel to VCB 2x2.5 Sqmm Aramourd cable under ground in trench making proper complete in all respect as per RESSPO Norms.

Laying through Underground Trech.(a)Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Laying / re-laying of cable in cable trench and from ground level to Pole

Laying / re-laying of cable in cable trench and from ground level to Pole

Laying / re-laying of cable in cable trench and from ground level to Pole