Civil & Construction Works Tenders

Carrying out minor maintenance civil works of Hall-7, 8, 9, 10, 11,New Sac,new Sport Complex, Football Ground, Hockey Ground, Pronite Ground, Event Ground

Earth work in foundation in hard soil or gravelly soil within 50m intial lead and lifts 1.5 M intial lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site including cost of all labour, T&P and dewatering if required for the work etc. complete as per drawing and Technical specification and as directed by the Engineer-in-Charge.

P. H. Works Division

P. H. Works Division

prepare the surface even and smooth complete. 13.44S EXTERIOR FINISHING Finishing walls with water proofing cement paint 13.44 of required shade : 13.44.1 New work (Two or more coats applied @ 3.84 Sqm 4000 116.9 467600 47 kg/10 sqm) Painting with synthetic enamel paint of 13.61 approved brand and manufacture to give an even shade : 48 13.61.1 Two or more coats on new work Sqm 5000 155.9 779500 15.0 DISMANTLING AND DEMOLISHING 15.1S General Demolishing cement concrete manually/ by mechanical means including disposal of 15.2 material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (including cum 100 2434.25 243425 49 equivalent design mix) Demolishing brick work manually/ by mechanical means including stacking of 15.7 serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 50 15.7.4 In cement mortar cum 30 2060.2 61806 Dismantling tile work in floors and roofs laid in 15.23 cement mortar including stacking material within 50 metres lead. 51 15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 500 73.4 36700 15.58 Demolishing R.C.C. work by mechanical means cum 70 2818.9 197323 and stockpiling at designated locations and disposal of dismantled materials up to a lead of 52 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars. 16.0 ROAD WORK 16.1S ROADS 16.1 Preparation and consolidation of sub grade with Sqm 145 218.9 31740.5 power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating 53 with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. 16.3 Supplying and stacking at site. 54 16.3.1 90 mm to 45 mm size stone aggregate cum 150 2098.4 314760 55 16.3.2 63 mm to 45 mm size stone aggregate cum 150 1636.05 245407.5 16.42S CONCRETE PAVEMENTS PUNE DIVISION-ENGG/CENTRAL RLY Providing and laying design mix cement concrete of M-30 grade, in roads/taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved and specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling 16.43 to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction and longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). 16.43.1 Cement concrete prepared with batch mixing cum 195 10529.35 2053223.25 56 machine 17.0 SANITARY INSTALLATIONS 17.1S General Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with 17.1 manually controlled device (handle lever) conforming to IS : 7231,with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.1.1 White Vitreous china Orissa pattern W.C. pan of Each 10 6767.4 67674 57 size 580x440 mm with integral type foot rests Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm 17.7 C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.1 White Vitreous China Wash basin size 630x450 Each 10 2648.85 26488.5 58 mm with a pair of 15 mm C.P. brass pillar taps Providing and fixing controlled flush, low level 17.19 cistern made of vitreous china with all fittings complete. 59 17.19.1 10 litre (full flush) capacity-white Each 10 2243.75 22437.5 Providing and fixing PTMT Waste Coupling for 17.69 wash basin and sink, of approved quality and colour. 17.69.2 Waste coupling 38 mm dia of 83 mm length and Each 10 122.4 1224 60 77mm breadth, weighing not less than 60 gms Providing and fixing PTMT Bottle Trap for Wash 17.70 basin and sink. 17.70.2 Bottle trap 38 mm single piece moulded with Each 10 375.65 3756.5 height of 270 mm, effective length of tail pipe