Loading
Loading…
Loading…
11,006 results • Best match
Renovation/Upgrdation of Existing Store into Fashion Design and Technology Lab, Computer Lab, Canteen and Generator room including all electrical and mechanical works at NSTI Campus, Haldwani, District-Nainital (Uttarakhand).
Memo No. 4024 /E-1362058 /EE-E/NKDA/ Elect/ 2026-27-Electrical Work for NKDA Unit office at Action Area-IIIE, New Town, Kolkata under NKDA
Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (A) 4 way
(I) Electrical work in c/w "Provision of 2nd FOB (6.1 meter) with covered Pathway at AHA station." (II) Provision of FOB Ramp into circulating area with extension at SGG station."
10 10 Laying of LT cable through the HDPE pipe 50 mm Metre 200.00 194.70 38940.00
Utility Electrical Poles shifting( 33/11KV) Work Phalodi (NH-15 ) TO Needer via Ahu Pachudi Nagaur Taranu Kuchaman ,Renewal Kaladera km 359/00 to 384/00
Add extra in item no. 11.1 to 11.4 for Laying Charges for cable through Manual Boggi by making pit at regular interval and repairing the pit after laying of cable with PCC/ Bitumin as required.
Tenderization for ARC Work of Laying testing & commissioning of 11/22 KV UG XLPE CABLE with 11/22 KV Cable End Termination & ST joint Kits (to be Supplies by Agency) along with Erection of HT,LT & TC , Maintenance works under CFC and if required any other Sdn under jurisdiction of Sachin Division under ND and if Required Any other Scheme.
tender for UG cable laying work.
(SH- SITC of Water Cooler and RO System, LED fittings and other electrical works at PWD Road Sub Division SER-13, SER-21, SER-24, VREC Jangpura and other Delhi Govt. Offices)
Supplying, installation, Testing & Commissioning of maximum 8watt and lumen flux luminaries 800 lumen COB LED Recessed/surface Down lighter (Round/ square/ Rectangular) SMD type with dali control gear of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD 10%, P. F.≥0.95, IP20, CRI >90, UGR (Unified Glare Rating) 16, Flicker free (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), life time of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) 3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in- Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body including trim .